Fracturation d'âge Aptien supérieur sur la bordure orientale de la plate-forme arabique (Haushi-Huqf,Oman)Aptian faulting (Shu'aiba Formation) on the eastern edge of the Arabian Platform (Haushi-Huqf,Oman)

In the Haushi-Huqf (Eastern Central Oman) as in other parts of the Arabian platform, a major sedimentary break is recorded between the Early Aptian carbonates (Shu'aiba Formation) and the Albian orbitolinid-rich marls (Nahr Umr Formation). The unconformity corresponds to a succession of events: (1) a brusque interruption of the regressive sequence of the Shu'aiba limestone (algae and small rudistid build-ups); (2) a stratigraphic gap related to the Late Aptian; (3) the development of a thick ferruginous crust (hardground) that covered the top surface of the Shu'aiba; the hardground is related to a forced flooding surface; (4) the Shu'aiba was rapidly drowned and buried under the Nahr Umr marls. Moreover, the Shu'aiba limestone was subject to faulting NW–SE-trending normal faults before lithification and formation of the ferruginous crust. The faulting episode is clearly dated: post-Early Aptian and pre-Albian. The signification of the faulting remains hypothetical. The syndiagenetic NW–SE normal faults may correspond to ‘en echelon’ faults, combined with transcurrent fault movements (for example the Haushi-Nafun Fault). The possible causes of these intra-platform transcurrent movements are discussed. To cite this article: C. Montenat, P. Barrier, C. R. Geoscience 334 (2002) 781–787.     

The Bocchigliero Palaeozoic sequence in the context of the Calabrian–Peloritan Hercynian Range (Italy)

The Calabrian–Peloritan Hercynian Range includes three weakly metamorphosed Palaeozoic sequences cropping out in north-eastern Sila (Bocchigliero sequence), southern Sila, Serre and Aspromonte (Stilo sequence), and in the Peloritan Mountains (Peloritan sequence). The work reported here considers the Bocchigliero sequence and comprises part of a geological, petrological and geochemical research programme on the Palaeozoic evolution of the Calabrian–Peloritan Arc. The Bocchigliero sequence constitutes the lower tectonic unit of the Hercynian Caiabrian–Peloritan Range and is overthrusted by the metamorphic Mandatoriccio Unit. The Bocchigliero sequence is a terrigenous–carbonate–volcanic association, is affected byclow grade metamorphism, contains Cambro-Ordovician fossils and extends in age from the Cambrian to the Devonian. The terrigenous material is represented by meta-arenites and metapelites (Cambrian–Devonian); the volcanics include metatuffites (Cambrian and Ordovician), metabasalts (Cambro-Ordovician), metaandesites and metarhyolites (Ordovician and Siluro-Devonian); limestone beds are present in the Devonian. It is believed that the Palaeozoic Bocchigliero basin formed in the Cambrian on a continental crust in which the rocks constituting today's Mandatoriccio Unit were located at 3–8 km depth. The crustal thinning in the Cambro-Ordovician led to fracturing and upwelling of alkaline within-plate basaltic magmas, whereas in the Ordovician the thinning took place under conditions of higher plasticity. In this latter period an increase in temperature resulting from mantle upwelling produced crustal partial melts of andesite and rhyolite composition. In addition, this thermal uprise was responsible for regional metamorphism characterized by low pressures and by the absence of penetrative deformation. The effects of this metamorphism are well developed in the rocks of the Mandatoriccio Unit. In the Silurian and Devonian, progressive closing of the basin took place. The Palaeozoic sequence was then subjected to Variscan low pressure–low temperature metamorphism and Alpine deformation.     

Lithosphere structure of the Ukrainian Shield and Pripyat Trough in the region of EUROBRIDGE-97 (Ukraine and Belarus) from gravity modelling

The southern segment of the seismic profile EUROBRIDGE—EUROBRIDGE-97 (EB'97)—located in Belarus and Ukraine, crosses the suture zone between two main segments of the East European Craton—Fennoscandia and Sarmatia—as well as Sarmatia itself. At the initial stage of our study, a 3-D density model has been constructed for the crust of the study region, including the major part of the Osnitsa–Mikashevichi Igneous Belt (OMIB) superimposed by sediments of the Pripyat Trough (PT), and three domains in the Ukrainian Shield—the Volhyn Domain (VD) with the anorthosite–rapakivi Korosten Pluton (KP), the Podolian Domain (PD), and the Ros–Tikich Domain (RTD). The model comprises three layers—sediments with maximum thickness (6 km) in the PT and two heterogeneous layers in the crystalline crust separated at a depth of 15 km. 3-D calculations show the main features of the observed gravity field are caused by density heterogeneities in the upper crust. Allocation of density domains deeper than 15 km is influenced by Moho topography. Fitting the densities here reveals an increase (up to 2960 kg m⁻³) in the modelled bodies accompanied by a Moho deepening to 50 km. In contrast, a Moho uplift to a level of 35–37 km below the KP and major part of the PT is associated with domains of reduced densities. An important role for the deep Odessa–Gomel tectonic zone, dividing the crust into two regions one of basically Archean consolidation in the west (PD and RTD) and one of Proterozoic crust in the east (Kirovograd Domain)—was confirmed.2-D density modelling on the EB'97 profile shows that in the upper crust three main domains of different Precambrian evolution—the OMIB (with the superimposed PT), the VD with the KP, and the PD—can be distinguished. Deeper, in the middle and lower crust, layered structures having no connection to the surface geology are dominant features of the models. Least thickness of the crust was obtained below the KP. Greatest crustal thickness (more than 50 km) was found below the PD, characterised also by maximum deviation of velocity/density relation in the rocks from a standard one. The velocity and density models along the EB'97 profile have been interpreted together with inferred V_p/V_s ratios to estimate crustal composition in terms of SiO₂ content. In the course of the modelling, the status of the PD as a centre of Archean granulitic consolidation has been confirmed. The crustal structure of the anorthosite–rapakivi KP is complex. For the first time, a complicated structure for the lower crust and lower crust–upper mantle transition zone beneath the KP has been determined. The peculiarities of the crustal structure of the KP are quite well explained in terms of formation of rapakivi–anorthosite massifs as originating from melt chambers in the upper mantle and lower crust. An important role for the South Pripyat Fault (SPF), repeatedly activated during Proterozoic–Palaeozoic times, has been ascertained. At the subplatform stage of crustal evolution the SPF was, probably, a magma channel facilitating the granitic intrusions of the KP. In the Palaeozoic the fault was reactivated during rifting in the PT.     

Tertiary extension of continental crust and uplift of Psiloritis metamorphic core complex in the central part of the Hellenic Arc (Crete,Greece)

Kinematic analysis of the deformation in central Crete suggests that the structural evolution and exhumation of the high pressure/low temperature (HP/LT) rocks outcropping at the Mount Psiloritis metamorphic core complex are associated with a regional, Miocene, north-south extension and thinning of the continental crust. This tectonic regime developed under bulk coaxial strain conditions, with ductile deformation in the lower and brittle deformation in the upper crust, and followed, on the decompressional path, a north-south compression associated with a HP/LT metamorphism in the lower crust. This compressional event took place during Oligocene—Early Miocene and led to overthickening of the accretionary wedge in the Hellenic Arc. An east-west directed compression accompanied, in the final stages, the Miocene north-south extension of the continental crust.     

Geochronological constraints on the timing of granitoid magmatism, metamorphism and post-metamorphic cooling in the Hercynian crustal cross-section of Calabria

Exposed cross‐sections of the continental crust are a unique geological situation for crustal evolution studies, providing the possibility of deciphering the time relationships between magmatic and metamorphic events at all levels of the crust. In the cross‐section of southern and northern Calabria, U–Pb, Rb–Sr and K–Ar mineral ages of granulite facies metapelitic migmatites, peraluminous granites and amphibolite facies upper crustal gneisses provide constraints on the late‐Hercynian peak metamorphism and granitoid magmatism as well as on the post‐metamorphic cooling. Monazite from upper crustal amphibolite facies paragneisses from southern Calabria yields similar U–Pb ages (295–293±4 Ma) to those of granulite facies metamorphism in the lower crust and of intrusions of calcalkaline and metaluminous granitoids in the middle crust (300±10 Ma). Monazite and xenotime from peraluminous granites in the middle to upper crust of the same crustal section provide slightly older intrusion ages of 303–302±0.6 Ma. Zircon from a mafic to intermediate sill in the lower crust yields a lower concordia intercept age of 290±2 Ma, which may be interpreted as the minimum age for metamorphism or intrusion. U–Pb monazite ages from granulite facies migmatites and peraluminous granites of the lower and middle crust from northern Calabria (Sila) also point to a near‐synchronism of peak metamorphism and intrusion at 304–300±0.4 Ma. At the end of the granulite facies metamorphism, the lower crustal rocks were uplifted into mid‐crustal levels (10–15 km) followed by nearly isobaric slow cooling (c. 3 °C Ma^?1) as indicated by muscovite and biotite K–Ar and Rb–Sr data between 210±4 and 123±1 Ma. The thermal history is therefore similar to that of the lower crust of southern Calabria. In combination with previous petrological studies addressing metamorphic textures and P–T conditions of rocks from all crustal levels, the new geochronological results are used to suggest that the thermal evolution and heat distribution in the Calabrian crust were mainly controlled by advective heat input through magmatic intrusions into all crustal levels during the late‐Hercynian orogeny.     

克拉通、下地壳与大陆岩石圈——庆贺沈其韩先生百年华诞

把克拉通、下地壳和大陆岩石圈这几个重要的地质名词放在一起做文章的标题,其实只是想强调一个事情,即陆壳形成和稳定化的结果是形成大陆岩石圈。大陆岩石圈是地球圈层的基本单元,是现代板块构造运动的核心构件和核心载体。忽视大陆岩石圈,要讨论地球上大陆与大洋、地壳与地幔、地球的深部圈层与外部圈层、内部圈层间相互作用以及物质与能量的交换等问题都无法深入。大陆岩石的最初形成可能在冥古宙早期已经开始,全球大陆的稳定化即克拉通化一般认为完成于太古宙末,并开启了元古宙的新纪元。对大陆壳的形成机制和演化过程,已经有很多讨论,但是还存在许多争议。而对大陆岩石圈人们知之不多,文献中常常在早期的小的陆壳形成,即陆核或微陆块阶段,就将其与大陆岩石圈的概念混为一谈。岩石圈的形成固然是大陆形成演化的结果,但是岩石圈的物质组成、结构和物理性质等从最初形成到成熟并成为稳定的地球独立圈层并足以承担板块构造的重任,可能经历了不止一个阶段。本文强调应对岩石圈的形成和演化给予更多的关注,并深化研究大陆地壳形成、克拉通化对大陆岩石圈形成的贡献。     

Vertical zonation and petrogenesis of the early Precambrian crust in Western Australia

Variations in metamorphic grade, structural style, isotopic ages and granite geochemistry observed within the Yilgarn craton, and between the Yilgarn and Pilbara cratons, Western Australia, are interpreted in terms of vertical zonation of the Archaean crust. We correlate the gneiss-granulite suite of the Wheat Belt (southwestern Yilgarn) with concealed coeval infracrustal roots of the low-grade granite—greenstone Kalgoorlie terrain (eastern Yilgarn). Differences between the Pilbara, Southern Cross and Laverton granite—greenstone blocks and the downfaulted linear greenstone belts of the Kalgoorlie block are interpreted in terms of deeper-level exposure in the first three blocks.Ultramafic—mafic volcanic sequences in the Yilgarn craton can be divided into at least two major groups — the lower greenstones, regarded as relicts of a once extensive simatic crust, and the significantly younger upper greenstones, believed to have formed within linear troughs following the intrusion of Na-rich granites.At least three major Archaean granite phases occur in Western Australia: (1) 3.1-2.9 b.y. old (recognized to date only in the western Yilgarn and in the Pilbara craton); (2) 2.8-2.7 b.y. old, and (3) 2.6 b.y. old (the two latter phases can only be separated from each other in the eastern Yilgarn, and phase (3) is also identified in the Pilbara). In the main, granites of phases (1) and (2) are Na-rich and those of phase (3) are K-rich. There is evidence for a secular increase in Rb levels and initial ⁸⁷Sr/⁸⁶Sr ratios. It is suggested that the K-rich granites grade down into Na-rich granites, and the former were generated by ensialic anatexis resulting in upward migration of K, Rb, U, and Th-enriched magmas.A review of data from several Archaean cratons in other continents suggests that evidence from these regions can be interpreted in terms of the general model of crustal evolution proposed for Western Australia. Implications of this model concerning petrogenesis of Archaean plutonic and volcanic suites, geothermal gradients and tectonic evolution of greenstone belts are discussed. Partial melting associated with mantle diapirism is thought to have given rise to the ultramafic—mafic volcanic cycles. Widespread subsidence and partial melting of this crust yielded Na-rich acid magmas. The development of the upper greenstones was confined to linear belts in a partly cratonized crustal environment. About 2.6 b.y. ago a rise in the geothermal gradient resulted in regional metamorphism and crusctal anatexis which gave rise to the K-rich granites.     

Differential glacio-isostatic uplift of crustal blocks at Glen Roy, Scotland

Detailed measurements of the altitudes of the shorelines of former ice-dammed lakes in Glen Roy and vicinity in the Scottish Highlands prove erroneous the conventional view that former shorelines in areas affected by glacio-isostatic uplift are uniformly tilted and/or gently warped. The measurements demonstrate differential uplift of blocks of the earth's crust. The surfaces of some blocks have no detectable tilt whereas others have gradients up to at least 4.6 m/km and are tilted in different directions. In three areas 0.7–2.0 km long, shorelines are distorted by crustal movements; all these areas have landslides attributed to earthquakes that accompanied the release of stress. In the area of greatest local distortion three shorelines rose about 3 m above their average altitudes for the immediately surrounding area, and a fault scarp was produced. Possibly these local distortions accompanied catastrophic lake drainage by jökulhlaup, analogous to crustal movements associated with man-made lakes. A relationship between crustal movement and the limit of a glacial advance is demonstrated. These findings have implications for other parts of the world affected by glacioisostatic uplift.     

Low-pressure metamorphism of Palaeozoic pelites in the Aspromonte, southern Calabria: constraints for the thermal evolution in the Calabrian crustal cross-section during the Hercynian orogeny

During Hercynian low-pressure/high-temperature metamorphism of Palaeozoic metasediments of the southern Aspromonte (Calabria), a sequence of metamorphic zones at chlorite, biotite, garnet, staurolite–andalusite and sillimanite–muscovite grade was developed. These metasediments represent the upper part of an exposed tilted cross-section through the Hercynian continental crust. P–T information on their metamorphism supplements that already known for the granulite facies lower crust of the section and allows reconstruction of the thermal conditions in the Calabrian crust during the late Hercynian orogenic event. Three foliations formed during deformation of the metasediments. The peak metamorphic assemblages grew mainly syntectonically (S2) during regional metamorphism, but mineral growth outlasted the deformation. This is in accordance with the textural relationships found in the lower part of the same crustal section exposed in the northern Serre. Pressure conditions recorded for the base of the upper crustal metasediments are c. 2.5 kbar and estimated temperatures range from <350 °C in the chlorite zone, increasing to 500 °C in the lower garnet zone, and reaching 620 °C in the sillimanite–muscovite zone. Geothermal gradients for the peak of metamorphism indicate a much higher value for the upper crust (c. 60 °C km^?1) than for the granulite facies lower crust (30–35 °C km^?1). The small temperature difference between the base of the upper crust (620 °C at c. 2.5 kbar) and the top of the lower crust (690 °C at 5.5 kbar) can be explained by intrusions of granitoids into the middle crust, which, in this crustal section, took place synchronously with the regional metamorphism at c. 310– 295 Ma. It is concluded that the thermal structure of the Calabrian crust during the Hercynian orogeny – as it is reflected by peak metamorphic assemblages – was mainly controlled by advective heat input through magmatic intrusions into all levels of the crust.     

Explosion seismic P and S velocity and attenuation constraints on the lower crust of the North–Central Tibetan Plateau, and comparison with the Tethyan Himalayas: Implications on composition, mineralogy, temperature, and tectonic evolution

P and S velocity and attenuation estimates in the lower crust are obtained from a set of wide angle reflection–refraction profiles in the region of active tectonics at the NE edge of the Tibetan Plateau and discussed together with respect to similar data at its Himalaya–south Tibet edge.The quality factor is estimated in the lower half of the crust by accounting for the differential effect on amplitude–frequency observed between waves of different penetrations, and both in P and S modes. Attenuation values allow to exclude a significant proportion of partial melt and to estimate the homologous temperature, ratio of in situ to solidus absolute temperatures. The latter depend on the physical conditions being of dry, wet or dehydration melting, which are found different among the regions of the northern Bayan Har and northern Qang Tang boundaries between blocks, as well as the Tethyan–Himalayas, south of the Indus–Tsangpo suture. Their in situ temperatures differ also as estimated from their different V_p for a similar felsic composition.Joint measurement of several parameters, V_p, V_s, Q_p and Q_s reveals the composition, mineralogy, temperature and hydration conditions of the lower half of the thickened crust of Tibet that may be discussed in terms of evolution. The material presently in the thickened crust, even its lower part, has a felsic composition, upper to middle crustal lithology, and the temperature conditions estimated suggest that basic material that could have underlain it could be eclogitized and not appear anymore above the seismic Moho.Under northern Qang Tang, the felsic material in the lower half of the crust appears as hot and dry. Its burial may have occurred earlier or may have been moderate in the postcollisional phase. This is consistent with a model of indentation of the Qang Tang crust by an originally thinner Bayan Har crust to bring part of its crust to greater depth, suggested from imaging the crustal architecture. Under northern Bayan Har, the material in the lower half of the crust appears as felsic, at low temperature and not dry conditions. This is evidence that it has been transported from a shallower depth, and this recently enough not to be yet dehydrated and temperature equilibrated in a conductive geotherm. It supports a model of recent overriding of the middle crust of the north Kun Lun block to the north independently suggested from the image of crustal architecture. The Tethyan Himalayas case appears bracketed by these two cases in northern Tibet for V_p and temperature conditions, but shows highest attenuation in the lower crust that is colder but less dry than under northern Qang Tang.     

Poisson's ratios of the upper and lower crust and the sub-Moho mantle beneath central Honshu, Japan

Poisson's ratios of the upper and lower crust and the sub-Moho mantle beneath central Honshu, Japan, are investigated using three independent methods that are based on S to P ratios of apparent velocities, the Wadati diagrams and an inversion of P and S arrivals. Shallow earthquakes at distances of 200—500 km from the Nagoya University Telemeter Network are used for the apparent velocity ratio method. Crustal and subcrustal earth-quakes under the network are used for the other two methods. The network consists of wide-band seismometers with three components which are particularly suitable for detecting S waves. The three different methods give a consistent result for Poisson's ratio σ, that is, (1) σ = 0.23 ± 0.01 in the upper crust, (2) σ = 0.26−0.28 in both the lower crust and in the sub-Moho mantle. The result indicates a sharp contrast in σ between the upper and the lower crust rather than at the Moho. The low σ in the upper crust can only be explained by the presence of a substantial amount of free quartz, indicating granitic rocks. A higher σ in the lower crust suggests that this portion is presumably less saturated in silica and may be even undersaturated, pointing to intermediate to mafic rocks. The sub-Moho σ is almost equal to the σ averaged over the entire upper mantle that has been estimated from the Wadati diagrams of deep shocks beneath Japan but is higher than those calculated from Pn and Sn velocities in oceanic and stable continental regions.     

Structure and evolution of the Cauvery Shear Zone system, Southern Granulite Terrain, India: Evidence from deep seismic and other geophysical studies

The Southern Granulite Terrain with exposed Archean lower crustal rocks is studied using various geophysical tools. The crustal structure derived from seismic reflection and refraction/wide-angle reflection studies is used to understand the tectonic evolution of the region. Deep seismic reflection section along the Kolattur–Palani segment shows an oppositely dipping reflection fabric near the Moyar–Bhavani shear zone, which is interpreted as a signature of collision between the Dharwar craton and another crustal block in the south. The thickened crust due to collision was delaminated during the orogenic collapse and modified the central part, covering the Cauvery Shear Zone system, located between the Moyar–Bhavani and Karur–Oddanchatram shear zones. The delaminated lower crust is altered by magmatic underplating as evidenced by the high velocity layer just above the Moho. The velocity model of the region indicates crustal thickening at the boundary of the Dharwar craton and Moyar–Bhavani shear zone and thinning further south. Back-scattered seismic wave field with negative moveout and the Moho-offset indicate the spatial location and strike-slip nature of the shear zones. Present study suggests that the late Archean collision and suturing of the Dharwar craton with the southern crustal block at the Moyar–Bhavani shear zone may be responsible for the evolution of late Archean granulites. Late Neoproterozoic rifting is observed along the paleo-fault zones. The seismic studies constrained by gravity, magnetic and magnetotelluric data suggest that the Moyar–Bhavani and Karur–Oddanchatram shear zones of the Cauvery Shear Zone system mark terrane boundaries/suture zones.     

New constraints to the geodynamic evolution of the southern sector of the Calabria–Peloritani Arc (Italy)Nouvelles données sur l'évolution géodynamique du secteur méridional de l'Arc Calabro-Péloritain (Italie)

New studies have been carried out on the Tertiary of the Stilo Unit, the uppermost of the Calabria–Peloritani Arc southern sector, and the Stilo–Capo d'Orlando Formation, sealing the whole nappe stack. The Tertiary terrains linked to the Mesozoic cover of the Stilo Unit consist of the lowermost Oligocene Palizzi Formation and the Late Rupelian–Aquitanian Pignolo Formation. The possibility that they deposited before the emplacement of this unit as the highest tectonic sheet of the sector is suggested. The base of the Stilo–Capo d'Orlando Formation resulted of Burdigalian age in both type areas. This interpretation, together with the existing and new data, allows proposing an age close to the Aquitanian–Burdigalian boundary for the stacking of the whole Calabria–Peloritani Arc southern sector. To cite this article: G. Bonardi et al., C. R. Geoscience 334 (2002) 423–430.     

Upper Holocene sea-level changes: Paleogeographic evolution and its impact on coastal archaeological sites and monuments

The paper presents the evolution of the geographic environment imposed by sea-level changes in selected sites of the Aegean Sea region during the Upper Holocene. The changes are due, mainly, to paroxysmic phases of the actual neotectonic evolution and to differential—in time and space—block movements, and emerged or submerged coasts. The reconstitution of these coasts is presented and, in some cases, natural harbor morphology is revealed. The use and evolution of these sites is discussed. Other sites concern coastal or inland ancient settlements or constructions affected by submersion by the sea, by the rise of the groundwater table, or by uplift movements. A general discussion on engineering measures to be applied for protection of the antiquities affected by these geographic changes closes the presentation.     

The Ivrea—Verbano and Strona-Ceneri Zones, Northern Italy: A cross-section of the continental crust—New evidence from seismic velocities of rock samples

Seismic velocities under confining pressures to 10 kbar have been measured for rocks of the Ivrea—Verbano and Strona—Ceneri Zones of northern Italy, a metamorphic complex thought to represent a cross-section of the continental crust and crust—mantle boundary. Laboratory-determined compressional wave velocities for schists and gneisses of the amphibolite facies found in the upper levels of the section (having an average density of 2.74 g/cm³) average 6.45 km/sec at pressures between 6 and 10 kbar. These increase with depth to values greater than 7.1 km/sec for amphibolites and rocks of the amphibolite—granulite facies transition and to 7.5 km/sec. (average density 3.06 g/cm³) in intermediate and mafic granulite facies rocks near the base of the section. Compressional wave velocities then abruptly increase to 8.5 km/sec in ultramafic complexes near the Insubric Line. Regional geophysical surveys show that P_g is 6.0 km/sec (density of 2.7 g/cm³), P* is 7.2–7.4 km/sec (density of 3.1 g/cm³) and P_n is 8.1 km/sec, values which are in agreement with the laboratory data when effects of temperature are taken into consideration. Estimated thicknesses of exposed rock units are in reasonable agreement with thicknesses determined for crustal layers in seismic refraction experiments. The agreement between the regional crustal structure and the laboratory-determined values of velocity and density provides strong evidence for the hypothesis that the rocks of this metamorphic complex represent a cross-section of the continental crust of the Po Basin.Using the Ivrea—Verbano and Strona—Ceneri sequence as a model of the continental crust, the crust of northern Italy is shown to consist of a thick series of metamorphic rocks with greenschist facies rocks occupying the uppermost levels. These grade downward into amphibolite facies gneisses and schists with occasional granitic intrusives. The Conrad discontinuity is marked by a change from silicic and intermediate amphibolite facies gneisses to intermediate and mafic granulite facies rocks in which hydrous minerals diminish in abundance and thus represents a distinct transition in terms of both composition and metamorphic grade. The lower crust is dominated by a heterogeneous series of mafic and metapelitic rocks in the granulite facies. Importantly, metasedimentary rocks of intermediate silica content found in the complex can have compressional wave velocities equivalent to velocities in mafic rocks suggesting that the lower continental crust everywhere is not necessarily mafic in composition. Ultramafic complexes near the Insubric Line may represent the upper mantle of the continent and their setting suggests that the continental crust-upper mantle boundary is sharp and is not isochemical.     

Mineralogy,paragenesis and genesis of the braunite deposits of the Mary Valley Manganese Belt,Queensland, Australia

The Mary Valley manganese deposits exhibit mineralogy and textures characteristic of at least four parageneses. The deposits consist mainly of isolated occurrences of braunite, together with a number of lower and higher valency manganese oxides, and manganese silicates, in bedded radiolarian cherts and jaspers of Permian age. The parageneses are: (a) Braunite — quartz (primary), (b) Braunite — hausmannite — spessartine — tephroite — quartz (metamorphic). (c) Hydrated manganese silicates — barite — braunite — hausmannite (hydrothermal veins), (d) Tetravalent manganese oxides (pyrolusite, cryptomelane, manjiroite, nsutite) (supergene). The primary mineralisation is interpreted as the result of the geochemical separation of Mn from Fe in a submarine exhalative system, and the precipitation of Mn as oxide within bedded radiolarian oozes and submarine lavas. During diagenesis this hydrothermal manganese oxide reacted with silica to produce primary braunite. The later geological of evolution of this volcanogenicsedimentary deposit involved metamorphism, hydrothermal veining by remobilised manganese, and supergene enrichment.     

华南火山岩及铀成矿相关的Sr,Nd,Pb同位素演化规律研究

本文应用Ｓｒ,Ｎｄ,Ｐｂ同位素演化示踪获得：华南各地区中生代火山岩的同位素演化受区域古陆（基底）变质岩、早期改造衍生体和再循环陆壳制约;铀成矿同位素组成具有地壳来源性。燕山期大陆边缘增生作用,导致陆内下地壳岩浆活动及拉张裂陷等地壳运动,促成铀的迁移富集成矿。     

Dolomitic marbles and associated calc-silicates, Tandilia belt, Argentina: Geothermobarometry, metamorphic evolution, and P–T path

The metamorphic evolution of dolomitic marbles and associated calc-silicate rocks from Punta Tota (NE Tandilia belt, Buenos Aires province, Argentina) has been evaluated through petrographic, geothermobarometric, and fluid inclusion studies. Thin beds of dolomitic marble are intercalated in amphibolites and constitute the upper part of a stratified basement sequence, which starts at the base with garnet migmatites showing a great abundance of pegmatitic segregates, overlain by biotite–garnet gneisses. Peak metamorphic conditions are estimated at 750–800 °C and 5–6 kb, followed by near isobaric cooling to about 500–450 °C and 5.5–6.5 kb. Anhydrous progressive metamorphic assemblages in both marbles (Fo + Cal + Dol + Cpx + Spl) and adjacent calc-silicate rocks (Cpx + An + Cal + Qtz) strongly retrogressed to hydrous minerals (Tr, Tlc, Grs, Czo, Srp) with decreasing temperatures and increasing water activities. The intense rehydration of the rocks relates to the emplacement of volatile-rich pegmatitic bodies (Qtz + Pl + Kfs + Bt + Grt), which also resulted in the crystallization of clinochlore + phlogopite in the marble and biotite + muscovite in the adjacent calc-silicate rocks. Metamorphic reactions based on textural relations and evaluated on a suitable petrogenetic grid, combined with geothermobarometric results and fluid inclusion isochores, indicate a metamorphic evolution along a counterclockwise P–T path. Two probable geotectonic settings for the determined P–T trajectory are proposed: (1) thinning of the crust and overlying supracrustal basin in an ensialic intraplate tectonic setting and (2) development of a marginal back-arc basin, associated with an oceanic–continental convergent plate margin. In both models, the initial extensional regime is followed by a compressional stage, with overthickening of the basement and supracrustal rocks, during the climax of the Transamazonian cycle at approximately 1800 Ma ago. Continuous convergence and blockage of structures produce transition to transcurrent tectonics (transpression) with a consequent moderate uplift.     

Elemental mobility during the weathering of exposed lower crust: the kinzigitic paragneisses from the Serre, Calabria, southern Italy

Weathering and transportation studies of the chemical composition of sediments have determined how surface fractionation processes modify the elemental signature due to provenance and tectonic setting of siliciclastic rocks. Although the bulk of the exposed upper continental crust comprises granitoids, metamorphic rocks from the intermediate to lower crust may be, in some geological contexts, the provenance of siliciclastic sediments. A preferential enrichment of the LREE relative to the HREE is observed in weathered, garnet-rich, kinzigitic paragneisses from the Calabrian Arc, southern Italy. This fractionation is due mostly to the mineralogical control exerted by monazite, which is concentrated in the silt-size fraction of the soil. However, a significant part of HREE, released during garnet alteration, is trapped by secondary minerals in the clay-sized fraction of the soil, in a manner similar to Pb²⁺ and Cs⁺, cations of some concern in environmental geochemistry. In the weathered material monazite is also important in controlling the Eu-anomaly, the negative size of which increases with increasing Th addition. The Eu-anomaly in the clay-sized fraction of the soil is very similar to that of the fresh rock, suggesting that the Eu/Eu* index in pelitic sediments deriving from the intermediate to lower crust may be regarded as a reliable indicator of parental affinity. Other provenance indicators include La/Th, which share the same mineralogical control; indicators of contrasting mafic and felsic provenance, e.g. Sc/Th, should be used with care.     

The western and northern margin off svalbard

Recent geophysical measurements, including multi-channel seismic reflection, on the Svalbard passive margin have revealed that it has undergone a complex geological history which largely reflects the plate tectonic evolution of the Greenland Sea and the Arctic Ocean. The western margin (75–80°N) is of a sheared-rifted type, along which the rifted margin developed subsequent to a change in the pole of plate rotation about 36 m.y. B.P. The north-trending Hornsund Fault on the central shelf and the eastern escarpment of the Knipovich Ridge naturally divide the margin into three structural units. These main marginal structures strike north, paralleling the regional onshore fault trends. This trend also parallels the direction of Early Tertiary plate motion between Svalbard and Greenland. Thus, the western Svalbard margin was initially a zone of shear, and the shear movements have affected the adjacent continental crust. Although, the nature and location of the continent—ocean crustal transition is somewhat uncertain, it is unlikely to lie east of the Hornsund Fault. The northern margin, including the Yermak marginal plateau, is terminated to the west by the Spitsbergen Fracture Zone system. This margin is of a rifted type and the preliminary analysis indicates that the main part of the investigated area is underlain by continental crust.