High salinity fluid inclusions in the Yinshan polymetallic deposit from the Le–De metallogenic belt in Jiangxi Province, China: Their origin and implications for ore genesis

A fluid inclusion investigation of the polymetallic mineralization at Yinshan from the Le–De metallogenic belt in Jiangxi Province of China has been carried out using petrographic and microthermometric techniques. The data obtained here indicate that three major types of fluids were involved during the formation of the deposit. They are type I vapor-rich, type II liquid-rich and type III halite-bearing inclusions within the H₂O–NaCl system. The high salinity fluids represented by type III inclusions, being unusual to the distal part of an intrusion-centered ore-forming system such as Yinshan, have been interpreted as the product of direct exsolution of a crystallizing magma, rather than a result of fluid immiscibility from a low salinity fluid. Evidence used to support such an interpretation includes the mode of homogenization of type III inclusions exclusively via halite dissolution, spatial separation of type I and type III inclusions on microscopic scale, the consistent phase ratios within the inclusions concerned, and considerable deviation in homogenization temperature for both type I and type III inclusions. Trapping conditions for type I inclusions were estimated to be around 440 °C and 260 bars, while type III inclusions were constrained to be trapped at least above 900 bars and > 500 °C. The formation temperatures for type II inclusions range from 270 to 390 °C if a lithostatic pressure of 260 bars is assumed. Pressure fluctuation determined by this fluid inclusion study coupled with decreases in salinity and temperature as result of the potential fluid mixing are supposed to have played an important role in triggering the precipitation of ore minerals from the hydrothermal solution.     

Fluid evolution of the Chalukou giant Mo deposit in the northern Great Xing'an Range,NE China

The Chalukou giant Mo deposit in the Heilongjiang Province, northeastern China, is a porphyry deposit hosted in an intermediate‐felsic complex surrounded by Mesozoic volcano–sedimentary rocks. The mineralization process is composed of four stages, including quartz + K‐feldspar (Stage I), quartz + molybdenite (Stage II), pyrite + chalcopyrite + quartz ± other sulphides (Stage III) and carbonate ± fluorite ± quartz (Stage IV). The mineralization is generally associated with intense K‐feldspar‐, fluorite‐, phyllic‐ and propylitic alteration. Primary fluid inclusions (FIs) in quartz include four compositional types, i.e. pure carbonic (PC‐type), aqueous‐carbonic (C‐type), daughter mineral‐bearing (S‐type) and aqueous (W‐type) inclusions. Halite, sylvite and hematite are recognized as the daughter minerals in Stage I S‐type FIs, whereas molybdenite and chalcopyrite occur as daughter minerals in Stage II S‐type FIs. High‐salinity and high pressure (>220 MPa) FIs exist in Stage I quartz veins, characterized by homogenization through halite dissolution at temperatures of 324 to 517 °C. The paucity of coexisting vapour‐rich FIs with similar homogenization temperatures at this stage indicates that the initial S‐type inclusions have directly exsolved from the magma rather than boiling off of a low‐salinity vapour. Stage I quartz has captured the C‐ and W‐type FIs, which have totally homogenized at 270–530 °C with salinities of 1.6–17.0 wt.% NaCl equiv. At Stage II, the coexistence of all FI types were only observed at pressures of 150–218 MPa and temperatures of 352–375 °C, with two salinity clusters of 0.9–16.6 wt.% NaCl equiv. and 37–56 wt.% NaCl equiv. Stage III quartz contains W‐type FIs with homogenization temperatures of 158–365 °C, salinities of 0.5–9.0 wt.% NaCl equiv., and minimum pressures of 12–116 MPa; whilst Stage IV fluorite or calcite only contains W‐type FIs with homogenization temperatures of 121–287 °C, salinities of 0.5–5.3 wt.% NaCl equiv., and minimum pressures of 10–98 MPa. The estimated trapping pressure from Stages II to III suggests an alternating lithostatic–hydrostatic fluid‐system caused by fluid boiling. Ore fluids at the Chalukou Mo deposit may have been evolved from a CO₂‐rich, high‐salinity, and high‐oxygen fugacity (fO₂) magma system, to a CO₂‐poor, low‐salinity, and low‐fO₂ epithermal system. Two key points may have contributed to the formation of the Chalukou giant Mo deposit: The magmatic origin and fluid boiling that has resulted in decompression and rapid precipitation of metals. Copyright © 2014 John Wiley & Sons, Ltd.     

Fluid inclusion and stable isotope study of the Cobre–Babilonia polymetallic epithermal vein system, Taxco district, Guerrero, Mexico

The Cobre–Babilonia vein system formed during a single major hydrothermal stage and is part of the Taxco district in Guerrero, southern Mexico. Homogenization and ice melting temperatures range from 160 to 290 °C and from − 11.6 to − 0.5 °C, respectively. We determined an approximate thermal gradient of 17 to 20 °C per 100 m using fluid inclusions. A thermal peak marked by the 290 °C isotherm is interpreted as a major feeder channel to the veins. The highest content of Zn + Pb in ore coincides with the 220 and 240 °C isotherms. Salinities of mineralizing fluids range from 0.8 to 15.6 wt.% NaCl equiv, and are distributed in two populations that can be related with barren or ore-bearing vein sections, with 0.8 to 6 wt.% NaCl equiv and 7 to 15.6 wt.% NaCl equiv, respectively. δ¹³C and δ¹⁸O water values from calcite from the Cobre–Babilonia vein system and the Esperanza Vieja and Guadalupe mantos range − 5.4‰ to − 10.4‰ and 9.9‰ to 13.4‰, respectively. δ³⁴S values range from 0‰ to 3.2‰ and − 0.7‰ to − 4.3‰ in sphalerite, − 4‰ to 0.9‰ in pyrite, and − 1.4‰ to − 5.5‰ in galena. Both fluid inclusion and stable isotope data are compatible with magmatic and meteoric sources for mineralizing fluids. Also, sulfur isotope compositions suggest both magmatic and sedimentary sources for sulfur.     

Two Cu–Co sulfide phases and contrasting fluid systems in the Katanga Copperbelt, Democratic Republic of Congo

The Katanga Copperbelt is the Congolese part of the well-known Central African Copperbelt, the largest sediment-hosted stratiform Cu–Co province on Earth. Petrographic examination of borehole samples from the Kamoto and Luiswishi mines in the Katanga Copperbelt recognized two generations of hypogene Cu–Co sulfides and associated gangue minerals (dolomite and quartz). The first generation is characterized by fine-grained Cu–Co sulfides and quartz replacing dolomite. The second generation is paragenetically later and characterized by coarse-grained Cu–Co sulfides and quartz overgrown and partly replaced by dolomite. Fluid inclusion microthermometric data were collected from two different types of fluid inclusions: type-I fluid inclusions (liquid + vapor) in the quartz of the first generation and type-II fluid inclusions (liquid + vapor + halite) in the quartz of the second generation. The microthermometric analyses indicate that the fluids represented by type-I and type-II fluid inclusions had very different temperatures and salinities and were not in thermal equilibrium with the host rock.Petrographic and microthermometric data indicate the presence of at least two main hypogene Cu–Co sulfide phases in the Katanga Copperbelt. The first is an early diagenetic typical stratiform phase, which produced fine-grained sulfides that are disseminated in the host rock and frequently concentrated in nodules and lenticular layers. This phase is related to a hydrothermal fluid with a moderate temperature (115 to 220 °C, or less if reequilibration of inclusions has occurred) and salinity (11.3 to 20.9 wt.% NaCl equiv.). The second hypogene Cu–Co phase produced syn-orogenic coarse-grained sulfides, which also occur disseminated in the host rock but mainly concentrated in a distinct type of stratiform nodules and layers and in stratabound veins and tectonic breccia cement. This second phase is related to a hydrothermal fluid with high temperature (270 to 385 °C) and salinity (35 to 45.5 wt.% NaCl equiv.).A review of available microthermometric and ore geochronological data of the Copperbelt in both the Democratic Republic of Congo and Zambia supports the regional presence of the two Cu–Co phases proposed in our study. Future geochemical analyses in the Copperbelt should take into account the presence of, at least, these two Cu–Co phases, their contrasting fluid systems and the possible overprint of the first phase by the second one.     

Evolution of mineralizing fluids in the Zn–Pb–Cu(–Ag ± Au) skarn and epithermal deposits of the world-class San Martín district, Zacatecas, Mexico

Mineralizing fluids at the San Martín skarn show an evolution characterized by prograde and retrograde associations. The prograde mineral associations consist of (1) a massive garnet zone, (2) a tremolite ± garnet zone, and (3) a late association of quartz, sphalerite, calcite and fluorite lining the vugs in the garnet zone. The fluids of the prograde associations exhibit decreasing temperatures of homogenization (Th) and variable salinities. The fluids of the massive garnet zone have salinities of 36 wt.% NaCl equiv. and Th of 645 to 570 °C, corresponding to pressures of 1055 bar. At the tremolite ± garnet zone, Th range from 438 to 354 °C. In the late association at the endoskarn, the following evolution can be drawn: (a) salinities of 50 to 42 wt.% NaCl equiv., and Th of 455 to 346 °C in quartz, (b) salinities of 46 wt.% NaCl equiv., and Th of 415 to 410 °C in sphalerite, (c) salinities of 50 to 37 wt.% NaCl equiv., and Th of 479 to 310 °C in calcite, (d) salinities of 33 to 28 wt.% NaCl equiv. and of 24 to 22 wt.% KCl in fluorite, and (e) two types of fluids with salinities of 2 and 39 wt.% NaCl equiv. and Th 344 and 300 °C, respectively, in later saccharoidal quartz segregations. The retrograde mineral associations comprise pervasive propylitic alteration to carbonization, and mantos with sulfides. Fluids in epidote have salinities of 7.6 wt.% NaCl equiv. and Th of 287 to 252 °C, and in calcite have salinities of 9.2 to 1 wt.% NaCl equiv. and Th of 188 to 112 °C. Fluids in the sulfide assemblages in the mantos have salinities of 8 to 3 wt.% NaCl equiv. and Th 300 °C, with corresponding pressures of 94 bar. Fluids in late epithermal veins close to the intrusive body have salinities of 10 to 5 wt.% NaCl equiv. and Th of 275 to 200 °C, and distal veins show salinities of 2 to 1 wt.% NaCl equiv. and Th of 160 °C.     

Characteristics of Mineralizing Fluids of the Darreh‐Zerreshk and Ali‐Abad Porphyry Copper Deposits,Central Iran,Determined by Fluid Inclusion Microthermometry

The Darreh‐Zereshk (DZ) and Ali‐Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore‐hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz‐sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono‐phase vapor type (Type I), liquid‐rich two phase (liquid + vapor) type (Type IIA), vapor‐rich two phase (vapor + liquid) type (Type IIB), and multi‐phase (liquid + vapor + halite + sylvite + hematite + chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150° to >600°C from low to very high salinity (1.1–73.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th_(L‐V) > Tm_(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th_(L‐V) < Tm_(NaCl)). The high Th_(L‐V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of ～500°C and salinity ～50 wt% NaCl equiv. Cryogenic SEM‐EDS analyses of frozen and decrepitated ore‐bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl₂.     

Sn-polymetallic greisen-type deposits associated with late-stage rapakivi granites, Brazil: fluid inclusion and stable isotope characteristics

Tin-polymetallic greisen-type deposits in the Itu Rapakivi Province and Rondônia Tin Province, Brazil are associated with late-stage rapakivi fluorine-rich peraluminous alkali-feldspar granites. These granites contain topaz and/or muscovite or zinnwaldite and have geochemical characteristics comparable to the low-P sub-type topaz-bearing granites. Stockworks and veins are common in Oriente Novo (Rondônia Tin Province) and Correas (Itu Rapakivi Province) deposits, but in the Santa Bárbara deposit (Rondônia Tin Province) a preserved cupola with associated bed-like greisen is predominant. The contrasting mineralization styles reflect different depths of formation, spatial relationship to tin granites, and different wall rock/fluid proportions. The deposits contain a similar rare-metal suite that includes Sn (±W, ±Ta, ±Nb), and base-metal suite (Zn–Cu–Pb) is present only in Correas deposit. The early fluid inclusions of the Correas and Oriente Novo deposits are (1) low to moderate-salinity (0–19 wt.% NaCl eq.) CO₂-bearing aqueous fluids homogenizing at 245–450 °C, and (2) aqueous solutions with low CO₂, low to moderate salinity (0–14 wt.% NaCl eq.), which homogenize between 100 and 340 °C. In the Santa Bárbara deposit, the early inclusions are represented by (1) low-salinity (5–12 wt.% NaCl eq.) aqueous fluids with variable CO₂ contents, homogenizing at 340 to 390 °C, and (2) low-salinity (0–3 wt.% NaCl eq.) aqueous fluid inclusions, which homogenize at 320–380 °C. Cassiterite, wolframite, columbite–tantalite, scheelite, and sulfide assemblages accompany these fluids. The late fluid in the Oriente Novo and Correas deposit was a low-salinity (0–6 wt.% NaCl eq.) CO₂-free aqueous solution, which homogenizes at (100–260 °C) and characterizes the sulfide–fluorite–sericite association in the Correas deposit. The late fluid in the Santa Bárbara deposit has lower salinity (0–3 wt.% NaCl eq.) and characterizes the late-barren-quartz, muscovite and kaolinite veins. Oxygen isotope thermometry coupled with fluid inclusion data suggest hydrothermal activity at 240–450 °C, and 1.0–2.6 kbar fluid pressure at Correas and Oriente Novo. The hydrogen isotope composition of breccia-greisen, stockwork, and vein fluids (δ¹⁸O_quartz from 9.9‰ to 10.9‰, δD_H2O from 4.13‰ to 6.95‰) is consistent with a fluid that was in equilibrium with granite at temperatures from 450 to 240 °C. In the Santa Bárbara deposit, the inferred temperatures for quartz-pods and bed-like greisens are much higher (570 and 500 °C, respectively), and that for the cassiterite-quartz-veins is 415 °C. The oxygen and hydrogen isotope composition of greisen and quartz-pods fluids (δ¹⁸O_qtz-H2O=5.5–6.1‰) indicate that the fluid equilibrated with the albite granite, consistent with a magmatic origin. The values for mica (δ¹⁸O_mica-H2O=3.3–9.8‰) suggest mixing with meteoric water. Late muscovite veins (δ¹⁸O_qtz-H2O=−6.4‰) and late quartz (δ¹⁸O_mica-H2O=−3.8‰) indicate involvement of a meteoric fluid. Overall, the stable isotope and fluid inclusion data imply three fluid types: (1) an early orthomagmatic fluid, which equilibrated with granite; (2) a mixed orthomagmatic-meteoric fluid; and (3) a late hydrothermal meteoric fluid. The first two were responsible for cassiterite, wolframite, and minor columbite–tantalite precipitation. Change in the redox conditions related to mixing of magmatic and meteoric fluids favored important sulfide mineralization in the Correas deposit.     

Microthermometry and geochemistry of fluid inclusions from the Tennant Creek gold-copper deposits: implications for ore deposition and exploration

Gold-copper-bismuth mineralization in the Tennant Creek goldfield of the Northern Territory occurs in pipe-like, ellipsoidal, or lensoidal lodes of magnetite ± hematite ironstones which are hosted in turbiditic sedimentary rocks of Proterozoic age. Fluid inclusion studies have revealed four major inclusion types in quartz associated with mineralized and barren ironstones at Ten nant Creek; (1) liquid-vapour inclusions with low liquid/vapour ratios (Type I), (2) liquid-vapour inclusions with high liquid/vapour ratios or high vapour/liquid ratios and characteristic dark bubbles (Type II), (3) liquid-vapour-halite inclusions (Type III), and (4) liquid-vapour inclusions with variable liquid/vapour ratios (Type V). Type I inclusions are present in the barren ironstones and the unmineralized portions of fertile ironstones, whereas Types II and III inclusions are recognized in fertile ironstones. Trails of Types II and III inclusions cut trails of Type I inclusions. Type I fluid inclusions have homogenization temperatures of 100° to 350 °C with a mode at 200° to 250 °C. Type II inclusions in mineralized ironstones (e.g. Juno, White Devil, Eldorado, TC8 and Gecko K-44 deposits) have homogenization temperatures of 250 °C to 600 °C with a mode of 350 °C. Type I fluid inclusions have a salinity range of 10 to 30 NaCl equiv. wt %. Salinity measurements on fluid inclusions in the mineralized zones gave a range of 10 to 50 NaCl equiv. wt % with a mode of 35 NaCl equiv. wt %. Fluid inclusion studies indicate that the Tennant Creek ironstones were formed from a relatively low temperature and moderately saline fluid, where as gold and copper mineralization was deposited from later hydrothermal fluids of higher temperature and salin ity. Gas analysis indicates the presence of N₂ and CO₂, with very minor CH₄ in Types II inclusions but no N₂ or CH₄ gases in Type I inclusions. Microprobe analysis of the fluid inclusion decrepitates indicates that the inclusions from Tennant Creek contain sodium and calcium as dominant cations and potassium in a subordinate amount. The high temperatures ( 350 °C), high salinities ( 35 NaCl equiv. wt. %) and cation composition of the Tennant Creek ore fluids suggest that the ore fluids were derived from upward migrating heated basinal brines, although contribution from a magmatic source cannot be ruled out. Close association of vapour-rich Type IIb and salt-rich Type III inclusions in the mineralized ironstones (e.g. Juno, White Devil, Eldorado, TC8 and Gecko K-44) indicates heterogeneous trapping of ore fluids. This heterogeneous trapping is interpreted to be due to unmixing (exsolution) of a gas-rich (e.g. N₂) fluid during the upward migration of the metal bearing brines and/or due to degassing caused by reaction of oxidized ore fluids and host ironstones. Fluid inclusion data have important implications regarding the deposition of gold in the ironstones, and may have application in discriminating fertile from barren ironstones.     

Overheated, Cu-bearing magmas in the Zaldívar porphyry-Cu deposit, Northern Chile. Geodynamic consequences

The Zaldívar porphyry copper deposit, Northern Chile, consists of two major intrusions, the 290 Ma Zaldívar, and the more recent Miocene (38.7 Ma) Llamo porphyry. Five types of inclusions have been identified in quartz phenocrysts from Llamo porphyry, including melt inclusions (M), and four types of fluid inclusions, called MS (multi solids), B (brines), G (vapor-rich) and W (aqueous), respectively.Melt remnants, well preserved as M-inclusions, homogenize around 1000 °C. They show a rhyolitic composition, comparable to the most evolved acidic rhyolitic end member found elsewhere in the regional magmatism and to worldwide volcanic rhyolitic glass. High silica content in some inclusions can, however, be due to partial remelting of the quartz host during the heating run. Copper content in the same inclusions ranges between 0.03 and 0.57 wt.%, with an average concentration of 0.10 wt.%, suggesting a major magmatic source for the copper (orthomagmatic model).MS inclusions, which contain a number of solids at room temperature, mostly H₂O-bearing phases (system NaCl–KCl–((Fe, Mg, Cu)Cl)–H₂O, average salinity 70 wt.% NaCl equiv.), homogenize at magmatic temperatures (around 1000 °C). They represent the first fluids to have exsolved from the magma at depth, at a pressure of about 2 kbar. Their high homogenization temperature, comparable to values measured for melt inclusions (1000 to 1050 °C), may indicate trapping of MS and M inclusions in host phenocrysts from an immiscible mixture of silicate melt and highly saline fluids expelled from the magma during the early stage of quartz crystallization.The data indicate a magmatic origin for copper, as well as extremely high melt temperatures. These features are interpreted by magmatic differentiation of mantle-derived primitive melts, corresponding to major changes in the tectonic regime of the Andean margin, which occurred in Miocene times.     

Nature of fluids and regional implications for Lesser Himalayan carbonates and associated mineralization

Fluid inclusion data are presented for the successive stages of limestone, dolomite, magnesite and sulphide-bearing quartz veins in Proterozoic carbonate rocks of the Lesser Himalaya. Subsurface fluids were H₂O–NaCl–KCl ± MgCl₂ ± CaCl₂ and showed successive increase in salinity and temperature. The salinity of the pore fluid during limestone diagenesis was in the range of 7.5–15 eq wt.% NaCl and the magnesite-forming fluids had a salinity of about 9 to 19 eq wt.% NaCl. This progressive rise in salinity is attributed to a more saline fluid in the deeper zones. The inverse relation between homogenization temperatures and final melting temperatures suggests mixing of the fluids during diagenesis, and highly depleted δ¹⁸O values rule out participation of magmatic fluid in the mixing. A late stage carbonic fluid is linked with talc formation. The low temperature of sulphide-forming epigenetic solutions, as obtained from fluid inclusions, is also substantiated by the chemical data from these sulphides. δ³⁴S values in galena infer that magmatic sulphur was probably not involved, and the sulphur of the galena is derived from an isotopically heavy source.     

Infrared microthermometric and stable isotopic study of fluid inclusions in wolframite at the Xihuashan tungsten deposit,Jiangxi province,China

The Xihuashan tungsten deposit, Jiangxi province, China, is a world-class vein-type ore deposit hosted in Cambrian strata and Mesozoic granitic intrusions. There are two major sets of subparallel ore-bearing quartz veins. The ore mineral assemblage includes wolframite and molybdenite, with minor amounts of arsenopyrite, chalcopyrite, and pyrite. There are only two-phase aqueous-rich inclusions in wolframite but at least three major types of inclusions in quartz: two- or three-phase CO₂-rich inclusions, two-phase pure CO₂ inclusions and two-phase aqueous inclusions, indicating boiling. Fluid inclusions in wolframite have relatively higher homogenization temperatures and salinities (239–380°C, 3.8–13.7 wt.% NaCl equiv) compared with those in quartz (177–329°C, 0.9–8.1 wt.% NaCl equiv). These distinct differences suggest that those conventional microthermometric data from quartz are not adequate to explain the ore formation process. Enthalpy–salinity plot shows a linear relationship, implying mixing of different sources of fluids. Although boiling occurred during vein-type mineralization, it seems negligible for wolframite deposition. Mixing is the dominant mechanism of wolframite precipitation in Xihuashan. δ³⁴S values of the sulfides range from −1.6 to +0.1‰, indicative of a magmatic source of sulfur. δ¹⁸O values of wolframite are relatively homogeneous, ranging from +4.8‰ to +6.3‰. Oxygen isotope modeling of boiling and mixing processes also indicates that mixing of two different fluids was an important mechanism in the precipitation of wolframite.     

P-T evolution and fluid inclusion characteristics of retrograded eclogites,Münchberg Gneiss Complex,Germany

Kyanite eclogites occur as part of the Münchberger nappe pile in NE-Bavaria, West Germany. Eclogites are overprinted by subsequent amphibolite facies metamorphism. The preservation of primary eclogitic textures as well as symplectitic textures are indicative of rapid decompression. Eclogite formation is estimated to have occurred under conditions of high H₂O-activities at pressures between 20 and 26 kbar and temperatures ranging between 590 and 660° C, as is shown by the coexistence of omphacite (Jd 50), kyanite, zoisite and quartz. Minimum pressure estimates, independent of the water activity, range between 9 and 16 kbar at the relevant temperatures. Detailed studies of fluid inclusion reveal two predominant groups of aqueous-brine inclusions: high salinity (14–17 wt% NaCl equiv.) and low salinity (0–8 wt% NaCl equiv.) inclusions. Fluid compositions of both groups of inclusions yield isochores passing close to the estimated amphibolite facies PT-field. The compositions of these fluids are in good agreement with fluid compositions considered from mineral equilibria. None of the fluid inclusions has densities appropriate for eclogite facies metamorphism, but probably reflect later amphibolite facies metamorphism.     

Gold potential of the volcanoplutonic zones in the southeastern Siberian Platform and physicochemical conditions of the deposit formation

Numerous gold deposits and occurrences were recognized in the regions of tectonomagmatic activation in the southeastern Siberian Platform. They are located in four metallogenic zones: the Ket-Kap (skarns, quartz veins, and stockworks; gold-bearing lodes in silicitolites; and argillisite-sericite metasomatites), Ulkan (clayey-micaceous metasomatites, quartz veins), Preddzhugdzhur (quartz veins, skarns, and sericite-hydromicaceous metasomatites), and Uda (sericite-hydromicaceous metasomatites). The skarn mineralization is of Meosozoic age, while the mineralization in the quartz veins, quartz-hydromicaceous metasomatites, and quartz-sulfide veins may have a Meosozoic, Paleozoic, or Late Paleozoic age. The highest temperatures were determined for the ore formation in the Preddzhugdzhur skarns (500–715 °C) and the hydrothermal-metasomatic rocks of the Ket-Kap zone (510–530 °C). The composition of gas-liquid inclusions in the minerals of these rocks is dominated by aqueous Na, K, and Ca chloride solutions with salinity up to 40 wt % NaCl equiv; fluid contains CO₂. Quartz veins and stockworks of the Ket-Kap zone were formed under high (up to 465°C) and moderate temperatures and salinity up to 32 wt % NaCl equiv. Sometimes, the minerals in these rocks contain inclusions of low-density CO₂. The gold-bearing veins of the Preddzhugdzhur zone formed at 225–230°C and salinity of 1–2 wt % NaCl equiv. The ore-bearing solutions in the gold-bearing veins of the Ulkan zone are characterized by a potassium-sodium-chlorine composition and salinity of 2–10 wt % NaCl equiv., and the temperature of their formation was 220–280 °C.     

Density Calculation for NaCl-H2O Solutions in the Liquid-Solid Two-Phase Field in NaCl-H2O Three-Phase Inclusions

Three-phase NaCl-H₂O fluid inclusions featuring halite dissolution temperature（Tm）higher than vapor bubble disappearance temperature（T_h） are commonly observed in porphyry copper/molybdenum deposits,skarn-type deposits and other magmatic- hydrothermal ore deposits.Based on |ΔV₁|（the absolute value of volume variation of NaCl-H₂O solution in a heating or cooling process of inclusions）= |ΔV_s|（the absolute value of volume variation of the halite crystal in a heating or cooling process of inclusions） and on the principle of conservation of the mass of NaCl and H₂O,we systematically calculated the densities of NaCl-H₂O solutions in the solid-liquid two-phase field for temperatures（T_h） from 0.1℃ to 800℃ and salinities from 26.3 wt%to 99.2wt%.Consequently for the first time we obtained the upper limit of the density of NaCI-H₂O solutions in the solid-liquid twophase field for T_bm inclusions with variant salinities.The results indicate that for inclusions of the T_hm type with the same T_h,the higher the T_m or salinity is,the higher the density of the NaClsaturated solution will be.If a group of fluid inclusions were homogeneously trapped,they must have the same T_h value and the same T_m or salinity value.This may be used to distinguish homogeneous,inhomogeneous,and multiple entrapments of fluid inclusions.     

Fluid Inclusions,Stable Isotopes,and Geochronology of the Haobugao Lead‐Zinc Deposit,Inner Mongolia,China

The Haobugao deposit, located in the southern segment of the Great Xing'an Range, is a famous skarn‐related Pb‐Zn‐(Cu)‐(Fe) deposit in northern China. The results of our fluid inclusion research indicate that garnets of the early stage (I skarn stage) contain three types of fluid inclusions (consistent with the Mesozoic granites): vapor‐rich inclusions (type LV, with V_H2O/(V_H2O + L_H2O) < 50 vol %, and the majority are 5–25 vol %), liquid‐rich two‐phase aqueous inclusions (type VL, with V_H2O/(V_H2O + L_H2O) > 50 vol %, the majority are 60–80 vol %), and halite‐bearing multiphase inclusions (type SL). These different types of fluid inclusions are totally homogenized at similar temperatures (around 320–420°C), indicating that the ore‐forming fluids of the early mineralization stage may belong to a boiling fluid system. The hydrothermal fluids of the middle mineralization stage (II, magnetite‐quartz) are characterized by liquid‐rich two‐phase aqueous inclusions (type VL, homogenization temperatures of 309–439°C and salinities of 9.5–14.9 wt % NaCl eqv.) that coexist with vapor‐rich inclusions (type LV, homogenization temperatures of 284–365°C and salinities of 5.2–10.4 wt % NaCl eqv.). Minerals of the late mineralization stage (III sulfide‐quartz stage and IV sulfide‐calcite stage) only contain liquid‐rich aqueous inclusions (type VL). These inclusions are totally homogenized at temperatures of 145–240°C, and the calculated salinities range from 2.0 to 12.6 wt % NaCl eqv. Therefore, the ore‐forming fluids of the late stage are NaCl‐H₂O‐type hydrothermal solutions of low to medium temperature and low salinity. The δD values and calculated δ¹⁸O_SMOW values of ore‐forming fluids of the deposit are in the range of ?4.8 to 2.65‰ and ?127.3‰ to ?144.1‰, respectively, indicating that ore‐forming fluids of the Haobugao deposit originated from the mixing of magmatic fluid and meteoric water. The S‐Pb isotopic compositions of sulfides indicate that the ore‐forming materials are mainly derived from underlying magma. Zircon grains from the mineralization‐related granite in the mining area yield a weighted ²⁰⁶Pb/²³⁸U mean age of 144.8 ±0.8 Ma, which is consistent with a molybdenite Re‐Os model age (140.3 ±3.4 Ma). Therefore, the Haobugao deposit formed in the Early Cretaceous, and it is the product of a magmatic hydrothermal system.     

Fault–valve action and vein development during strike–slip faulting: An example from the Ribeira Shear Zone, Southeastern Brazil

Fluid inclusion microthermometry and structural data are presented for quartz vein systems of a major dextral transcurrent shear zone of Neoproterozoic–Cambrian age in the Ribeira River Valley area, southeastern Brazil. Geometric and microstructural constraints indicate that foliation–parallel and extensional veins were formed during dextral strike–slip faulting. Both vein systems are formed essentially by quartz and lesser contents of sulfides and carbonates, and were crystallized in the presence of CO₂–CH₄ and H₂O–CO₂–CH₄–NaCl immiscible fluids following unmixing from a homogeneous parental fluid. Contrasting fluid entrapment conditions indicate that the two vein systems were formed in different structural levels. Foliation–parallel veins were precipitated beneath the seismogenic zone under pressure fluctuating from moderately sublithostatic to moderately subhydrostatic values (319–397 °C and 47–215 MPa), which is compatible with predicted fluid pressure cycle curves derived from fault–valve action. Growth of extensional veins occurred in shallower structural levels, under pressure fluctuating from near hydrostatic to moderately subhydrostatic values (207–218 °C and 18–74 MPa), which indicate that precipitation occurred within the near surface hydrostatically pressured seismogenic zone. Fluid immiscibility and precipitation of quartz in foliation–parallel veins resulted from fluid pressure drop immediately after earthquake rupture. Fluid immiscibility following a local pressure drop during extensional veining occurred in pre-seismic stages in response to the development of fracture porosity in the dilatant zone. Late stages of fluid circulation within the fault zone are represented dominantly by low to high salinity (0.2 to 44 wt.% equivalent NaCl) H₂O–NaCl–CaCl₂ fluid inclusions trapped in healed fractures mainly in foliation–parallel veins, which also exhibit subordinate H₂O–NaCl–CaCl₂, CO₂–(CH₄) and H₂O–CO₂–(CH₄)–NaCl fluid inclusions trapped under subsolvus conditions in single healed microcracks. Recurrent circulation of aqueous–carbonic fluids and aqueous fluids of highly contrasting salinities during veining and post-veining stages suggests that fluids of different reservoirs were pumped to the ruptured fault zone during faulting episodes. A fluid evolution trending toward CH₄ depletion for CO₂–CH₄–bearing fluids and salinity depletion and dilution (approximation of the system H₂O–NaCl) for aqueous–saline fluids occurred concomitantly with decrease in temperature and pressure related to fluid entrapment in progressively shallower structural levels reflecting the shear zone exhumation history.     

Immiscibility of high salinity fluids in volcanic rocks and the mechanism of magma degassing in the Dongying sag, eastern China

Fluid inclusions that bear halite daughter minerals were discovered in volcanic rocks at Pingnan area in the Dongying sag. The samples of the fluid inclusions collected from the BGX-15 well drill cores are hosted in quartz of diorite-porphyrite. The daughter minerals are identified as NaCl crystals after being observed under a microscope and analyzed by in situ Raman spectroscopy at −185°C. The results of micro-thermal analysis show that the homogenization temperatures of primary fluid inclusions are between 359 and 496°C, and the salinities of fluid inclusions are from 43.26 to 54.51 wt-%. All fluid inclusions in the studied samples can be divided into five types including primary fluid inclusions and secondary fluid inclusions. The fact that five types of fluid inclusions were symbiotic in the same quartz grain implies that immiscibility happened in magma. Due to the decrease in temperature and pressure during the ascent of magma, the fluids became intensively immiscible. This process accelerates the degassing of CO₂ from magma, but the remnant fluids with high salinity are preserved in fluid inclusions. Thus, the primary fluid inclusions are mainly in NaCl-H₂O fluids and poor in CO₂. The results of our study indicate that the degassing of magma and accumulation of CO₂ gas at the Pingnan area are relative to the immiscibility of high salinity fluids. This discovery is important because it can help us have a further understanding of the mechanism of magma degassing and accumulation of the inorganic CO₂ in eastern China. Translated from Acta Geologica Sinica, 2006, 80(11): 1699–1705 [译自: 地质学报]     

Fluid inclusion study of the Plomositas–Los Arcos polymetallic epithermal vein tract, Plomosas district, Sinaloa, Mexico

The most important deposit in the Plomosas–Rosario district, Sinaloa, is the vein tract named Plomositas–Plomosas–Los Arcos. These are NNW–SSE striking veins hosted in rocks of the Lower Volcanic Supergroup (LVS), and also in rocks at the bottom of the Upper Volcanic Supergroup (UVS). Both supergroups belong to the Sierra Madre Occidental. These veins evolved from an early intermediate sulfidation stage (1), rich in base metal sulfides, to a low sulfidation stage (2), rich in silver sulfides and sulfosalts. There is also a 45 m-wide stockwork with native silver and gold. Stage 1 is found in the deeper portion of the veins whereas stage 2 is found in the most shallow portion of the deposit. These stages record fluid inclusion salinities ranging from 7 to 12 wt.% NaCl equiv., and from 0.2 to 3.5 wt.% NaCl equiv., respectively. Homogenization temperatures range from 120 °C for surface samples to 200 °C at a depth of 320 m. The low homogenization temperatures recorded, and the dispersion of veins within host rocks as veinlets, suggest that this deposit formed at shallow depths and was probably blind.     

Ore-bearing fluids of the Eldorado gold deposit (Yenisei Ridge,Russia)

The Eldorado low-sulfide gold-quartz deposit, with gold reserves of more than 60 tons, is located in the damage zone of the Ishimba Fault in the Yenisei Ridge and is hosted by Riphean epidote-amphibolite metamorphic rocks (Sukhoi Pit Group). Orebodies occur in four roughly parallel heavily fractured zones where rocks were subject to metamorphism under stress and heat impacts. They consist of sulfide-bearing schists with veins of gray or milky-white quartz varieties. Gray quartz predominating in gold-bearing orebodies contains graphite and amorphous carbon identified by Raman spectroscopy; the contents of gold and amorphous carbon are in positive correlation. As inferred from thermobarometry, gas chromatography, gas chromatography-mass spectrometry, and Raman spectroscopy of fluid inclusions in sulfides, carbonates, and gray and white quartz, gold mineralization formed under the effect of reduced H₂O-CO₂-HC fluids with temperatures of 180 to 490 °C, salinity of 9 to 22 wt.% NaCl equiv, and pressures of 0.1 to 2.3 kbar. Judging by the presence of 11% mantle helium (³He) in fluid inclusions from quartz and the sulfur isotope composition (7.1-17.4‰ δ³⁴S) of sulfides, ore-bearing fluids ascended from a mantle source along shear zones, where they “boiled”. While the fluids were ascending, the metalliferous S- and N-bearing hydrocarbon (HC) compounds they carried broke down to produce crystalline sulfides, gold, and disseminated graphite and amorphous carbon (the latter imparts the gray color to quartz). Barren veins of milky-white quartz formed from oxidized mainly aqueous fluids with a salinity of < 15 wt.% NaCl equiv at 150-350 °C. Chloride brines (> 30 wt.% NaCl equiv) at 150-260 °C impregnated the gold-bearing quartz veins and produced the lower strata of the hydrothermal-granitoid section. The gold mineralization (795-710 Ma) was roughly coeval to local high-temperature stress metamorphism (836-745 Ma) and intrusion of the Kalama multiphase complex (880-752 Ma).     

马坑铁钼铅锌多金属矿成矿流体演化及矿床成因类型

马坑铁矿是福建省一个大型铁钼铅锌多金属矿床,赋存于莒舟-大洋花岗岩外接触带上石炭统经畲组-下二叠统栖霞 组大理岩与下石炭统林地组石英砂岩之间,矿化阶段经历了从无水矽卡岩阶段（钙铁榴石-透辉石） →含水矽卡岩-磁铁矿 阶段（绿帘石-阳起石-绿泥石-钙铁辉石） →硫化物阶段（石英-方解石-萤石-黄铁矿-闪锌矿） →碳酸盐岩阶段（石英-方 解石） 演变,而本文对含水矽卡岩-磁铁矿阶段和硫化物阶段中的钙铁辉石、萤石、石英及方解石中流体包裹体所进行岩 相学观察和显微测温研究表明,早期含水矽卡岩-磁铁矿阶段包裹体类型主要有含NaCl子晶三相包裹体和富液相两相包裹 体,少量富气相两相包裹体;而晚期硫化物阶段包裹体类型主要为富液相两相包裹体。含水矽卡岩-磁铁矿阶段流体出现 流体沸腾作用,流体温度范围为448~596℃,两端员组分流体盐度分别为26.5~48.4 wt % NaCl equiv.和2.4~6.9 wt % NaCl equiv.;硫化物阶段流体呈现出混合趋势,流体温度和盐度分别为182~343℃和1.9~20.1 wt % NaCl equiv.。流体包裹体的均 一温度和盐度的研究结果表明含水矽卡岩-磁铁矿阶段流体主要来自岩浆水,而硫化物阶段流体以岩浆水为主,并有大气 降水加入。由于马坑铁矿化形成于含水矽卡岩阶段,铅锌矿化则形成于硫化物阶段,流体沸腾是导致马坑铁矿床形成的主 要因素,而流体混合则是引起马坑铁矿床铅锌矿化的主要因素。综合地质与地球化学研究,马坑铁矿床应属于与莒舟-大 洋花岗岩有关的矽卡岩型铁矿床。