Meteoritic and other constraints on the internal structure and impact history of small asteroids

Studies of the internal structure of asteroids, which are crucial for understanding their impact history and for hazard mitigation, appear to be in conflict for the S-type asteroids, Eros, Gaspra, and Ida. Spacecraft images and geophysical data show that they are fractured, coherent bodies, whereas models of catastrophic asteroidal impacts, family and satellite formation, and studies of asteroid spin rates, and other diverse properties of asteroids and planetary craters suggest that such asteroids are gravitationally bound aggregates of rubble. These conflicting views may be reconciled if 10-50 km S-type asteroids formed as rubble piles, but were later consolidated into coherent bodies. Many meteorites are breccias that testify to a long history of impact fragmentation and consolidation by alteration, metamorphism, igneous and impact processes. Ordinary chondrites, which are the best analogs for S asteroids, are commonly breccias. Some may have formed in cratering events, but many appear to have formed during disruption and reaccretion of their parent asteroids. Some breccias were lithified during metamorphism, and a few were lithified by injected impact melt, but most are regolith and fragmental breccias that were lithified by mild or moderate shock, like their lunar analogs. Shock experiments show that porous chondritic powders can be consolidated during mild shock by small amounts of silicate melt that glues grains together, and by friction and pressure welding of silicate and metallic Fe,Ni grains. We suggest that the same processes that converted impact debris into meteorite breccias also consolidated asteroidal rubble. Internal voids would be partly filled with regolith by impact-induced seismic shaking. Consolidation of this material beneath large craters would lithify asteroidal rubble to form a more coherent body. Fractures on Ida that were created by antipodal impacts and are concentrated in and near large craters, and small positive gravity anomalies associated with the Psyche and Himeros craters on Eros, are consistent with this concept. Spin data suggest that smaller asteroids 0.6-6 km in size are unconsolidated rubble piles. C-type asteroids, which are more porous than S-types, and their analogs, the volatile-rich carbonaceous chondrites, were probably not lithified by shock.     

Asteroids and meteorites: Parent bodies and delivered samples

Meteorites may be pieces of main-belt asteroids, derived by cratering collisions. The physical strength of an asteroid critically affects the quantity of ejecta that can be placed in orbits (probably resonant) that evolve to cross the Earth's. Asteroid strengths very widely due to initial composition and size (e.g., weak carbonaceous material or strong rock), subsequent geophysical evolution (e.g., formation of a strong iron core), and subsequent collisional evolution (e.g., conversion of a strong rocky body into a weak rubble pile). The meteorite yield on Earth further depends on meteorite strength, which affects longevity in space and survival through the atmosphere. We show that meteorites may be derived mainly by cratering rather than by disruptive fragmentation and from large main-belt asteroids rather than from small, Earth-approaching bodies. The model combines a wide variety of evidence from various disciplines to yield results consistent with meteorite statistics. However, no claim is made for uniqueness of this model, and many elements still admit considerable uncertainty.     

The global effects of impact-induced seismic activity on fractured asteroid surface morphology

Impact-induced seismic vibrations have long been suspected of being an important surface modification process on small satellites and asteroids. In this study, we use a series of linked seismic and geomorphic models to investigate the process in detail. We begin by developing a basic theory for the propagation of seismic energy in a highly fractured asteroid, and we use this theory to model the global vibrations experienced on the surface of an asteroid following an impact. These synthetic seismograms are then applied to a model of regolith resting on a slope, and the resulting downslope motion is computed for a full range of impactor sizes. Next, this computed downslope regolith flow is used in a morphological model of impact crater degradation and erasure, showing how topographic erosion accumulates as a function of time and the number of impacts. Finally, these results are applied in a stochastic cratering model for the surface of an Eros-like body (same volume and surface area as the asteroid), with craters formed by impacts and then erased by the effects of superposing craters, ejecta coverage, and seismic shakedown. This simulation shows good agreement with the observed 433 Eros cratering record at a Main Belt exposure age of 400±200 Myr, including the observed paucity of small craters. The lowered equilibrium numbers (loss rate = production rate) for craters less than ∼100 m in diameter is a direct result of seismic erasure, which requires less than a meter of mobilized regolith to reproduce the NEAR observations. This study also points to an upper limit on asteroid size for experiencing global, surface-modifying, seismic effects from individual impacts of about 70-100 km (depending upon asteroid seismic properties). Larger asteroids will experience only localized (regional) seismic effects from individual impacts.     

Constraints on the role of impact heating and melting in asteroids

Abstract— Imaging of asteroids Gaspra and Ida and laboratory studies of asteroidal meteorites show that impacts undoubtedly played an important role in the histories of asteroids and resulted in shock metamorphism and the formation of breccias and melt rocks. However, in recent years, impact has also been called upon by numerous authors as the heat source for some of the major geological processes that took place on asteroids, such as global thermal metamorphism of chondrite parent bodies and a variety of melting and igneous events. The latter were proposed to explain the origin of ureilites, aubrites, mesosiderites, the Eagle Station pallasites, acapulcoites, lodranites, and the IAB, IIICD, and HE irons. We considered fundamental observations from terrestrial impact craters, combined with results from laboratory shock experiments and theoretical considerations, to evaluate the efficiency of impact heating and melting of asteroids. Studies of terrestrial impact craters and relevant shock experiments suggest that impact heating of asteroids will produce two types of impact melts: (1) large-scale whole rock melts (total melts, not partial melts) at high shock pressure and (2) localized melts formed at the scale of the mineral constituents (mineral specific or grain boundary melting) at intermediate shock pressures. The localized melts form minuscule amounts of melt that quench and solidify in situ, thus preventing them from pooling into larger melt bodies. Partial melting as defined in petrology has not been observed in natural and experimental shock metamorphism and is thermodynamically impossible in a shock wave-induced transient compression of rocks. The total impact melts produced represent a minuscule portion of the displaced rock volume of the parent crater. Internal differentiation by fractional crystallization is absent in impact melt sheets of craters of sizes that can be tolerated by asteroids, and impact melt rocks are usually clast-laden. Thermal metamorphism of country rocks by impact is extremely minor. Experimental and theoretical considerations suggest that (1) single disruptive impacts cannot raise the average global temperature of strength- or gravity-dominated asteroids by more than a few degrees; (2) cumulative global heating of asteroids by multiple impacts is ineffective for asteroids less than a few hundred kilometers in diameter; (3) small crater size, low gravity, and low impact velocity suggest that impact melt volume in single asteroidal impacts is a very small (0.01–0.1%) fraction of the total displaced crater volume; (4) total impact melt volume formed during the typical lifetime of an asteroid is a small fraction (<0.001) of the volume of impact-generated debris; and (5) much of the impact melt generated on asteroidal targets is ejected from craters with velocities greater than escape velocity and, thus, not retained on the asteroid. The inescapable conclusion from these observations and calculations is that impacts cannot have been the heat source for the origin of the meteorite types listed above, and we must turn to processes other than impact, such as decay of short-lived radionuclides or electromagnetic induction during an early T-tauri phase of the Sun to explain heating and melting of the parent bodies of these meteorites.     

Impact cratering on porous asteroids

The increasing evidence that many or even most asteroids are rubble piles underscores the need to understand how porous structures respond to impact. Experiments are reported in which craters are formed in porous, crushable, silicate materials by impacts at 2 km/s. Target porosity ranged from 34 to 96%. The experiments were performed at elevated acceleration on a centrifuge to provide similarity conditions that reproduce the physics of the formation of asteroid craters as large as several tens of kilometers in diameter.Crater and ejecta blanket formation in these highly porous materials is found to be markedly different from that observed in typical dry soils of low or moderate porosity. In highly porous materials, the compaction of the target material introduces a new cratering mechanism. The ejection velocities are substantially lower than those for impacts in less porous materials. The experiments imply that, while small craters on porous asteroids should produce ejecta blankets in the usual fashion, large craters form without ejecta blankets. In large impacts, most of the ejected material never escapes the crater. However, a significant crater bowl remains because of the volume created by permanent compaction of the target material. Over time, multiple cratering events can significantly increase the global density of an asteroid.     

The Barringer Award Address Presented 1996 July 25, Berlin,Germany: Impact experiments related to the evolution of planetary regoliths

Abstract— Impact-induced comminution of planetary surfaces is pervasive throughout the solar system and occurs on submillimeter to global scales, resulting in comminution products that range from fine-grained surface soils, to massive, polymict ejecta deposits, to collisionally fragmented objects. Within this wide range of comminution products, we define regoliths in a narrow sense as materials that were processed by repetitive impacts to dimensional scales comparable to or smaller than that of component minerals of the progenitor rock(s). In this paper, we summarize a wide variety of impact experiments and other observations that were primarily intended to understand the evolution of regoliths on lunar basalt flows, and we discuss some of their implications for asteroidal surfaces. Cratering experiments in both rock and noncohesive materials, combined with photogeologic observations of the lunar surface, demonstrate that craters <500 m in diameter contribute most to the excavation of local bedrock for subsequent processing by micrometeorites. The overall excavation rate and, thus, growth rate of the debris layer decreases with time, because the increasingly thicker fragmental layer will prevent progressively larger projectiles from reaching bedrock. Typical growth rates for a 5 m thick lunar soil layer are initially (～≥3 Ga ago) a few mm/Ma and slowed to <1 mm/Ma at present. The coarse-grained crater ejecta are efficiently comminuted by collisional fragmentation processes, and the mean residence time of a 1 kg rock is typically 10 Ma. The actual comminution of either lithic or monomineralic detritus is highly mineral specific, with feldspar and mesostasis comminuting preferentially over pyroxene and olivine, thus resulting in mechanically fractionated fines, especially at grain sizes <20 μm. Such fractionated fines also participate preferentially in the shock melting of lunar soils, thus giving rise to “agglutinate” melts. As a consequence, agglutinate melts are systematically enriched in feldspar components relative to the bulk composition of their respective host soil(s). Compositionally homogeneous, impact derived glass beads in lunar soils seem to result from micrometeorite impacts on rock surfaces, reflecting lithic regolith components and associated mineral mixtures. Cumulatively, experimental and observational evidence from lunar mare soils suggests that regoliths derive substantially from the comminution of local bedrock; the addition of foreign, exotic components is not necessary to explain the modal and chemical compositions of diverse grain size fractions from typical lunar soils. Regoliths on asteroids are qualitatively different from those of the Moon. The modest impact velocities in the asteroid belt, some 5 km s^?1, are barely sufficient to produce impact melts. Also, substantially more crater mass is being displaced on low-gravity asteroids compared to the Moon; collisional processing of surface boulders should therefore be more prominent in producing comminuted asteroid surfaces. These processes combine into asteroidal surface deposits that have suffered modest levels of shock metamorphism compared to the Moon. Impact melting does not seem to be a significant process under these conditions. However, the role of cometary particles encountering asteroid surfaces at presumably higher velocities has not been addressed in the past. Unfortunately, the asteroidal surface processes that seemingly modify the spectral properties of ordinary chondrites to match telescopically obtained spectra of S-type asteroids remain poorly understood at present, despite the extensive experimental and theoretical insights summarized in this report and our fairly mature understanding of lunar surface processes and regolith evolution.     

High‐calcium pyroxene as an indicator of igneous differentiation in asteroids and meteorites

Abstract— Our analyses of high quality spectra of several S‐type asteroids (17 Thetis, 847 Agnia, 808 Merxia, and members of the Agnia and Merxia families) reveal that they include both low‐ and high‐calcium pyroxene with minor amounts of olivine (<20%). In addition, we find that these asteroids have ratios of high‐calcium pyroxene to total pyroxene of >～0.4. High‐calcium pyroxene is a spectrally detectable and petrologically important indicator of igneous history and may prove critical in future studies aimed at understanding the history of asteroidal bodies. The silicate mineralogy inferred for Thetis and the Merxia and Agnia family members requires that these asteroids experienced igneous differentiation, producing broadly basaltic surface lithologies. Together with 4 Vesta (and its smaller “Vestoid” family members) and the main‐belt asteroid 1489 Magnya, these new asteroids provide strong evidence for igneous differentiation of at least five asteroid parent bodies. Based on this analysis of a small subset of the near‐infrared asteroid spectra taken to date with SpeX at the NASA IRTF, we expect that the number of known differentiated asteroids will increase, consistent with the large number of parent bodies inferred from studies of iron meteorites.     

Evidence of space weathering in regolith breccias I: Lunar regolith breccias

Abstract— We have analyzed a suite of lunar regolith breccias in order to assess how well space weathering products can be preserved through the lithification process and therefore whether or not it is appropriate to search for space weathering products in asteroidal regolith breccia meteorites. It was found that space weathering products, vapor/sputter deposited nanophase‐iron‐bearing rims in particular, are easily identified in even heavily shocked/compacted lunar regolith breccias. Such rims, if created on asteroids, should thus be preserved in asteroidal regolith breccia meteorites. Two additional rim types, glass rims and vesicular rims, identified in regolith breccias, are also described. These rims are common in lunar regolith breccias but rare to absent in lunar soils, which suggests that they are created in the breccia‐forming process itself. While not “space weathering products” in the strictest sense, these additional rims give us insight into the regolith breccia formation process. The presence or absence of glass and/or vesicular rims in asteroidal regolith breccias will likewise tell us about environmental conditions on the surface of the asteroid body on which the breccia was created.     

The spectral and physical properties of metal in meteorite assemblages: Implications for asteroid surface materials

The metal grains in chondritic meteorites from terrestrial collections are coated with an optically thick surface layer, probably composed of iron oxide and/or iron sulfide. This coat on the metal grains suppresses the spectral contribution of NiFe metal in the reflectance curves of these meteorites. Only if this surface layer is disrupted will the strongly reddened signature of metallic NiFe be seen in chrondritic spectra. While origin of this surface layer is not yet established, it is probable that it is either pre-terrestrial or formed by the weathering of an unstable mineral species, such as lawrencite (FeCl₂), which was present as a thin, pre-terrestrial veneer on the chondritic metal grains. In either case, the surfaces of intact metal grains in asteroidal chondritic assemblages most probably will not resemble NiFe metal. Low-nickel metal grains, such as those in H-type chondrites, will be brittle at asteroid surface temperatures. High-nickel metal grains, such as those in LL-type chondrites, remain ductile down to at least 50°K, below even asteroid night side temperatures. The metal phase, even when brittle, will be at least as strong as the silicate phase in asteroid regoliths. Therefore, preferential fragmentation of brittle metal is not a viable mechanism to increase the spectral contribution of the NiFe phase in an asteroid regolith. Under plausible proposed regolith processes, only the metal-rich H-type subset of the ordinary chondrites can be expected to produce an S-type asteroid spectrum from an undifferentiated assemblage, and then only if optically thick metal grain coats are absent. Known regolith processes cannot reasonably produce an S-type spectrum from metal-poor L-, LL-, or C3-type assemblages. The strong NiFe signatures and the mafic silicate features in the reflectance spectra of the S-type asteroids appear to require that the most of them represent metal-rich, differentiated assemblages. The spectral properties of M-type asteroids do not require metal-rich or differentiated surface materials, although it is plausible that this is the case.     

Impact History of Eros: Craters and Boulders

Preliminary measurements of craters and boulders have been made in various locations on Eros from images acquired during the first nine months of NEAR Shoemaker's orbital mission, including the October 2000 low altitude flyover. (We offer some very preliminary, qualitative analysis of later LAF images and very high-resolution images obtained during NEAR's landing on 12 February 2001). Craters on Eros >100 m diameter closely resemble the saturated crater population of Ida; Eros is more heavily cratered than Gaspra but lacks the saturated giant craters of Mathilde. These craters and the other large-scale geological features were formed over a duration of very roughly 2 Gyr while Eros was in the main asteroid belt, between the time when its parent body was disrupted and Eros was injected into an Earth-approaching orbit (probably tens of Myr ago). Saturation equilibrium had been expected to shape Eros' crater population down to very small sizes, as on the lunar maria. However, craters <200 m diameter are instead progressively depleted toward smaller sizes and are a factor of ∼200 below empirical saturation at diameters of 4 m. Conversely, boulders and positive relief features (PRFs) rise rapidly in numbers (differential power-law index ∼−5) and those <10 m in size dominate the landscape at high resolutions. The pervasive boulders and minimal craters on Eros is radically different from the lunar surface at similar scales. This may be partly explained by a major depletion of meter-scale projectiles in the asteroid belt (due to the Yarkovsky Effect: Bell 2001), which thus form few small craters and destroy few boulders. Additionally, the small size and low gravity of Eros may result in redistribution or loss of ejecta due to seismic shaking, thus preferentially destroying small craters formed in such regolith. Possibly Eros has only a patchy, thin regolith of mobile fines; the smaller PRFs may then reflect exposures of fractured bedrock or piles of large ejecta blocks, which might further inhibit formation of craters <10 m in size. Eros may well have been largely detached dynamically and collisionally from the main asteroid belt for the past tens of Myr, in which case its cratering rate would have dropped by two orders of magnitude, perhaps enhancing the relative efficacy of other processes that would normally be negligible in competition with cratering. Such processes include thermal creep, electrostatic levitation and redistribution of fines, and space weathering (e.g., bombardment by micrometeorites and solar wind particles). Combined with other small-body responses to impact cratering (e.g., greater widespread distribution of bouldery ejecta), such processes may also help explain the unexpected small-scale character of geology on Eros. If there was a recent virtual hiatus in cratering of Eros (during which only craters <∼300 m diameter would be expected to have formed), space weathering may have reached maturity, thus explaining Eros' remarkable spectral homogeneity compared with Ida.     

Regolith transport in craters on Eros

Images of Eros from the NEAR Shoemaker spacecraft reveal bright and dark albedo features on steep crater walls unlike markings previously observed on asteroids. These features have been attributed to the downslope movement of space-weathered regolith, exposing less weathered material (Science 292 (2001) 484; Meteor. Planet. Sci. 36 (2001) 1617; Icarus 155 (2002) 145). Here we present observations of the interiors of large craters (>1 km in diameter) to test this hypothesis and constrain the origin of the features. We find that bright regions in these craters correspond to steep slopes, consistent with previous work. The geographic distribution of craters with albedo variations shows no pattern and does not resemble the distribution of ponds, another phenomenon on Eros attributed to regolith movement. Shadows and other indications of topography are not observed at feature boundaries, implying that the transported layer is ?1 m thick. The presence of multiple bright and dark units on long slopes with sharp boundaries between them suggests that mobilized regolith may be halted by frictional or other effects before reaching the foot of the slope. Features on crater walls should darken at the same rate as bright ejecta deposits from crater formation; the lack of observed, morphologically fresh craters with bright interiors or ejecta suggests that the albedo patterns are younger than the most recently formed craters greater than about 100 m in diameter. Smaller or micrometeorite impacts, which would not necessarily leave evident deposits of bright ejecta, remain possible causes of albedo patterns. Although their effectiveness is difficult to assess, electrostatic processes and thermal creep are also candidates.     

The origin of SNC meteorites: An alternative to Mars

Shergottites, Nakhlites, and Chassignites (SNC) are a small group of achondrites with crystallization ages of approximately 1.3 AE. Although it has recently been postulated the these meteorites came from Mars, the dynamical difficulties of ejecting large meteorites from a major planet have caused us to examine the alternative possibility that they crystallized from an impact melt formed on a large asteroid. The kinetic energy necessary to produce a crater of a given size is estimated; it is postulated that 25% of this energy is partitioned into heat, and the heat is distributed in this model in a pattern suggested by the impact melt distribution in Brent Crater and the radioactivity distribution in Cactus nucelear explosion crater. The time evolution of the temperature by heat conduction for several locations around the crater is computed. Crystallization times for the more deeply buried impact melts are form 5 × 10⁴ years for 60-km-diameter craters and increase for larger craters. These times are long enough for the observed cumulate textures to develop. Once solidified, these rocks may be ejected from the asteroid by subsequent cratering events. Since asteroidal escape velocities are low, ejection may be accomplished by shock pressures too low to produce petrologically detectable shock features. The SNC meteorites could thus have originated in the asteroid belt, their young crystallization ages being due to melting induced by impacts occurring on asteroids long after condensation from the solar nebula. This scenario avoids the dynamical difficulties of a major planet origin, but raises questions of how the SNC's acquired their chemical and REE characteristics. To date, there seems to be no internally consistent model for the origin of these strange meteorites. The impact melt hypothesis is offered as a rational alternative to a Martian origin. Neither hypothesis explains all the problems.     

Impact evolution of asteroid shapes: 1. random mass redistribution

We explore whether the cumulative effect of small-scale meteoroid bombardment can drive asteroids into nonaxisymmetric shapes comparable to those of known objects (elongated prolate forms, twin-lobed binaries, etc). We simulate impact cratering as an excavation followed by the launch, orbit, and reimpact of ejecta. Orbits are determined by the gravity and rotation of the evolving asteroid, whose shape and spin change as cratering occurs repeatedly. For simplicity we consider an end-member evolution where impactors are all much smaller than the asteroid and where all ejecta remain bound. Given those assumptions, we find that cumulative small impacts on rotating asteroids lead to oblate shapes, irrespective of the chosen value for angle of repose or for initial angular momentum. The more rapidly a body is spinning, the more flattened the outcome, but oblateness prevails. Most actual asteroids, by contrast, appear spherical to prolate. We also evaluate the timescale for reshaping by small impacts and compare it to the timescale for catastrophic disruption. For all but the steepest size distributions of impactors, reshaping from small impacts takes more than an order of magnitude longer than catastrophic disruption. We conclude that small-scale cratering is probably not dominant in shaping asteroids, unless our assumptions are naive. We believe we have ruled out the end-member scenario; future modeling shall include angular momentum evolution from impacts, mass loss in the strength regime, and craters with diameters up to the disruption threshold. The ultimate goal is to find out how asteroids get their shapes and spins and whether tidal encounters in fact play a dominant role.     

Experimental investigation of the impact fragmentation of blocks embedded in regolith

Abstract– We present results of a set of impact experiments designed to examine the effects of impacts onto rocky blocks resting on and embedded within regoliths. The targets were approximately 500 g granodiorite blocks, struck with one‐eighth inch aluminum spheres at nominal speeds of approximately 5 km s^?1. The granodiorite blocks were emplaced in 20–30 grade silica sand to simulate an asteroidal or lunar regolith; block burial depths ranged from resting flush on the surface to submerged completely below the surface. We observe a trend for largest remnant mass to increase with block burial depth. Documentary still image and high‐speed video of the resulting block fragments and surrounding regolith reveal new insights into the morphologies of blocks and secondary craters observed on asteroids like 433 Eros.     

Megaregolith evolution and cratering cataclysm models—Lunar cataclysm as a misconception (28 years later)

Abstract— The hypothesis of a lunar cataclysmic cratering episode between 3.8 and 3.9 Gyr ago lacks proof. Its strongest form proposes no cratering before about 4.0 Gyr, followed by catastrophic formation of most lunar craters and basins in >200 Myr. The premise that “zero impact melts implies zero impacts” is disproved by data from asteroids, on which early collisions clearly occurred, but from which early impact melts are scarce. Plausible cataclysm models imply that any cataclysm should have affected the whole inner solar system, but among available lunar and asteroid impact melt and impact age resetting data, a narrow, strong 3.8–3.9 Gyr spike in ages is seen only in the region sampled by Apollo/Luna. Reported lunar meteorite data do not show the spike. Asteroid data show a broader, milder peak, spreading from about 4.2 to 3.5 Gyr. These data suggest either that the spike in Apollo impact melt ages is associated with unique lunar front side events, or that the lunar meteorites data represent different kinds of events than the Apollo/Luna data. Here, we develop an alternate “megaregolith evolution” hypothesis to explain these data. In this hypothesis, early impact melts are absent not because there were no impacts, but because the high rate of early impacts led to their pulverization. The model estimates survival halflives of most lunar impact melts prior to 4.1 Gyr at >100 Myr. After a certain time, T_critical ?4.0 Gyr, impact melts began to survive to the present. The age distribution differences among impact melts and plutonic rocks are controlled by, and hold clues to, the history of regolith evolution and the relative depths of sequestration of impact melts versus plutonic rocks, both among lunar and asteroidal samples. Both the “zero cratering, then cataclysm” hypothesis and the “megaregolith evolution” hypothesis require further testing, especially with lunar meteorite impact melt studies.     

Cratering rates on the Galilean satellites

We exploit recent theoretical advances toward the origin and orbital evolution of comets and asteroids to obtain revised estimates for cratering rates in the jovian system. We find that most, probably more than 90%, of the craters on the Galilean satellites are caused by the impact of Jupiter-family comets (JFCs). These are comets with short periods, in generally low-inclination orbits, whose dynamics are dominated by Jupiter. Nearly isotropic comets (long period and Halley-type) contribute at the 1-10% level. Trojan asteroids might also be important at the 1-10% level; if they are important, they would be especially important for smaller craters. Main belt asteroids are currently unimportant, as each 20-km crater made on Ganymede implies the disruption of a 200-km diameter parental asteroid, a destruction rate far beyond the resources of today's asteroid belt. Twenty-kilometer diameter craters are made by kilometer-size impactors; such events occur on a Galilean satellite about once in a million years. The paucity of 20-km craters on Europa indicates that its surface is of order 10 Ma. Lightly cratered surfaces on Ganymede are nominally of order 0.5-1.0 Ga. The uncertainty in these estimates is about a factor of five. Callisto is old, probably more than 4 Ga. It is too heavily cratered to be accounted for by the current flux of JFCs. The lack of pronounced apex-antapex asymmetries on Ganymede may be compatible with crater equilibrium, but it is more easily understood as evidence for nonsynchronous rotation of an icy carapace.     

Original structures,and fragmentation and reassembly histories of asteroids: Evidence from meteorites

If chondritic meteorites were internally heated after accretion had ended, then the hottest material would have been buried the deepest and should have cooled the slowest. If this is correct, there ought to be a correlation between cooling rate and petrographic type, a measure of the extent to which chondrites were metamorphosed (i.e., heated). Published and new cooling rates derived from the compositions of metallic iron-nickel grains do not display this correlation, implying either that chondrite parent asteroids never had onion-shell structures or that bodies with onion-shell structures were broken up and reassembled prior to cooling to below 500°C, the temperature at which cooling-rate information is recorded in metallic iron-nickel. Chondritic regolith breccias formed from materials that resided on the surfaces of their parent asteroids. Metallic iron-nickel grains in H- and L-chondrite regolith breccias indicate that the breccia constituents cooled at rates ranging from 1 to > 1000°K/myr. Based on thermal calculations, these cooling rates suggest that the materials spread out on the surfaces of H- and L-chondrite parent asteroids originated at depths ranging from about one kilometer to several tens of kilometers. Craters deep enough to excavate tens of kilometers cannot form on typical asteroidal bodies only 100 to 300 km in diameter without disrupting them. Therefore, it appears that at least some asteroids, namely, the parent bodies of H and L chondrites, were disrupted after cooling to below 300°C, and then reassembled to create surfaces containing rocks that originated at a wide range of depths. These results support theoretical calculations suggesting that many asteroids were broken up and subsequently reassembled into gravitationally bound rubble piles.     

Grooves on asteroids: A prediction

The characteristics of the grooves on Phobos indicate that these features were formed by a large impact—an observation which implies that grooves may occur on other small bodies. Published data on fragmentation experiments suggest that the energy of the impact which produced the grooves on Phobos was in a critical range, strong enough to produce fracturing at large distances from the crater, but too weak to fragment the object. Other small bodies, such as asteroids, which have experienced an impact flux sufficient to include one such critical cratering event should show grooves, unless they have been fragmented subsequently by a more severe impact. We estimate that between $\text{1}\text{12}\text{th}\text{and}\text{1}\text{4}\text{th}$ of asteroids smaller than 100 km in diameter may have surface features resembling grooves associated with large impact craters. Several morphologically distinct types of grooves can be expected, depending on the thickness and composition of the regolith of the parent body. The full development of Phobos-like grooves seems to require a thick, and possibly volatile-rich, regolith—conditions which might obtain on certain C-asteroids.     

Black ordinary chondrites: An analysis of abundance and fall frequency

Abstract— Black ordinary chondrite meteorites sample the spectral effects of shock on ordinary chondrite material in the space environment. Since shock is an important regolith process, these meteorites may provide insight into the spectral properties of the regoliths on ordinary chondrite parent bodies. To determine how common black chondrites are in the meteorite collection and, by analogy, the frequency of shock-alteration in ordinary chondrites, several of the world's major meteorite collections were examined to identify black chondrites. Over 80% of all catalogued ordinary chondrites were examined and, using an optical definition, 61 black chondrites were identified. Black chondrites account for approximately 13.7% of ordinary chondrite falls. If the optically altered gas-rich ordinary chondrites are included, the proportion of falls that exhibit some form of altered spectral properties increases to 16.7%. This suggests that optical alteration of asteroidal material in the space environment is a relatively common process.     

Evidence for the insignificance of ordinary chondritic material in the asteroid belt

Abstract— We review the meteoritical and astronomical literature to answer the question: What is the evidence for the importance of ordinary chondritic material to the composition of the asteroid belt? From the meteoritical literature, we find that currently (1) our meteorite collections sample at least 135 different asteroids; (2) out of 25+ chondritic meteorite parent bodies, 3 are (by definition) ordinary chondritic; (3) out of 14 chondritic grouplets and unique chondrites, 11 are affiliated with a carbonaceous group/clan of chondrites; (4) out of 24 differentiated groups of meteorites, only the HE iron meteorites clearly formed from ordinary chondritic precursor material; (5) out of 12 differentiated grouplets and unique differentiated meteorites, 8 seem to have had carbonaceous chondritic precursors; (6) a high frequency of carbonaceous clasts in ordinary chondritic breccias suggests that ordinary chondrites have been embedded in a swarm of carbonaceous material. The rare occurrence (only one example) of ordinary chondritic clasts in carbonaceous chondritic breccias indicates that ordinary chondritic material has not been widespread in the asteroid belt; (7) cosmic spherules, micrometeorites, and stratospheric interplanetary dust particles—believed to represent a less biased sampling of asteroidal material—show that only a very small fraction (less than ～1%) of asteroidal dust has an ordinary chondritic composition. From the astronomical literature, we find that currently (8) spectroscopic surveys of the main asteroid belt are finding more and more nonordinary chondritic primitive material in the inner main belt; (9) the increase in spectroscopic data has increased the inferred mineralogical diversity of main belt asteroids; and (10) no ordinary chondritic asteroids have been directly observed in the main belt. These lines of evidence strongly suggest a scenario in which ordinary chondritic asteroids were never abundant in the main belt. The S-type asteroids may currently be primarily differentiated, but the precursor material is more likely to have been carbonaceous chondritic, not ordinary chondritic. Historically, carbonaceous material could have dominated the entire main belt. This could explain the presence in the inner main belt of asteroids linked to the primitive carbonaceous chondrites, and the absence of asteroids linked to the ordinary chondrites. The implications of this scenario for the asteroid heating mechanism(s) are briefly discussed.