Possible melting produced chondrule destruction in NWA 6604 CK4 chondrite

In analyzing a thin section of the NWA 6604 CK4 meteorite, only altered chondrules and various components that are probably left behind the destruction of former chondrules can be observed. We suggest that melting, grain size decrease, resorption of the original chondrules, and crystallization of opaque minerals were the main processes that destroyed the chondrules. Four different events could be identified as having occurred during this alteration. First, opaques crystallized along former fractures producing chains of separated grains. Later, opaques and Ca‐rich minerals crystallized together in veins and large melt pockets; this was the strongest recrystallization phase involving the largest volume of melt. This occurred along different fractures than the first phase above. During the third phase, only Ca‐rich plagioclase crystallized along thin veins, and in a fourth phase, fractures formed again, partly along those formed during the second phases but without substantial mineral infill. Two simple possible case models should be considered for this meteorite: alteration by purely impact‐driven processes or mainly by melt‐driven processes. Although for CK4 chondrites, the shock‐produced alteration driven by impact is the more accepted and widespread approach, melting is also compatible with the observed textural characteristics of chondrule destruction. During melting, recrystallization took place producing iron‐rich minerals earlier and Ca‐Si‐rich ones later. The penetration of melts into veins contributed in the chondrule destruction. The stress directions also changed during these alterations, and minerals that formed later filled differently oriented fractures than the earlier ones. From our observations, we favor a view where heat‐driven melting and recrystallization produced the destruction and uniform mineralogy in the sample.     

Northwest Africa 2526: A partial melt residue of enstatite chondrite parentage

Abstract— NWA 2526 is a coarse‐grained, achondritic rock dominated by equigranular grains of polysynthetically twinned enstatite (?85 vol%) with frequent 120° triple junctions and ?10–15 vol% of kamacite + terrestrial weathering products. All other phases including troilite, daubreelite, schreibersite, and silica‐normative melt areas make up 相似文献   

Characterization of weathering and heterogeneous mineral phase distribution in brachinite Northwest Africa 4872

Terrestrial weathering of hot desert achondrite meteorite finds and heterogeneous phase distributions in meteorites can complicate interpretation of petrological and geochemical information regarding parent‐body processes. For example, understanding the effects of weathering is important for establishing chalcophile and siderophile element distributions within sulfide and metal phases in meteorites. Heterogeneous mineral phase distribution in relatively coarsely grained meteorites can also lead to uncertainties relating to compositional representativeness. Here, we investigate the weathering and high‐density (e.g., sulfide, spinel, Fe‐oxide) phase distribution in sections of ultramafic achondrite meteorite Northwest Africa (NWA) 4872. NWA 4872 is an olivine‐rich brachinite (Fo_{63.6 ± 0.5}) with subsidiary pyroxene (Fs_9.7 ± 0.1Wo_{46.3 ± 0.2}), Cr‐spinel (Cr# = 70.3 ± 1.1), and weathered sulfide and metal. Raman mapping confirms that weathering has redistributed sulfur from primary troilite, resulting in the formation of Fe‐oxide (‐hydroxide) and marcasite (FeS₂). From Raman mapping, NWA 4872 is composed of olivine (89%), Ca‐rich pyroxene (0.4%), and Cr‐spinel (1.1%), with approximately 7% oxidized metal and sulfide and 2.3% marcasite‐dominated sulfide. Microcomputed tomography (micro‐CT) observations reveal high‐density regions, demonstrating heterogeneities in mineral distribution. Precision cutting of the largest high‐density region revealed a single 2 mm Cr‐spinel grain. Despite the weathering in NWA 4872, rare earth element (REE) abundances of pyroxene determined by laser‐ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) indicate negligible modification of these elements in this mineral phase. The REE abundances of mineral grains in NWA 4872 are consistent with formation of the meteorite as the residuum of the partial melting process that occurred on its parent body. LA‐ICP‐MS analyses of sulfide and alteration products demonstrate the mobility of Re and/or Os; however, highly siderophile element (HSE) abundance patterns remain faithful recorders of processes acting on the brachinite parent body(ies). Detailed study of weathering and phase distribution offers a powerful tool for assessing the effects of low‐temperature alteration and for identifying robust evidence for parent‐body processes.     

Possible records of space weathering on Vesta: Case study in a brecciated eucrite Northwest Africa 1109

Records of space weathering are important for understanding the formation and evolution of surface regolith on airless celestial bodies. Current understanding of space weathering processes on asteroids including asteroid‐4 Vesta, the source of the howardite–eucrite–diogenite (HED) meteorites, lags behind what is known for the Moon. In this study, we studied agglutinates, a vesicular glass‐coating lithic clast, and a fine‐grained sulfide replacement texture in the polymict breccia Northwest Africa (NWA) 1109 with electron microscopy. In agglutinates, nanophase grains of FeNi and FeS were observed, whereas npFe⁰ was absent. We suggested that the agglutinates in NWA 1109 formed from fine‐grained surface materials of Vesta during meteorite/micrometeorite bombardment. The fine‐grained sulfide replacement texture (troilite + hedenbergite + silica) should be a result of reaction between S‐rich vapors and pyroxferroite. The unique Fe/Mn values of relict pyroxferroite indicate a different source from normal HED pyroxenes, arguing that the reaction took place on or near the surface of Vesta. The fine‐grained sulfide replacement texture could be a product of nontypical space weathering on airless celestial bodies. We should pay attention to this texture in future returned samples by asteroid exploration missions.     

Contribution of early impact events to metal‐silicate separation,thermal annealing,and volatile redistribution: Evidence in the Pułtusk H chondrite

Three‐dimensional X‐ray tomographic reconstructions and petrologic studies reveal voluminous accumulations of metal in Pu?tusk H chondrite. At the contact of these accumulations, the chondritic rock is enriched in troilite. The rock contains plagioclase‐rich bands, with textures suggesting crystallization from melt. Unusually large phosphates are associated with the plagioclase and consist of assemblages of merrillite, and fluorapatite and chlorapatite. The metal accumulations were formed by impact melting, rapid segregation of metal‐sulfide melt and the incorporation of this melt into the fractured crater basement. The impact most likely occurred in the early evolution of the H chondrite parent body, when post‐impact heat overlapped with radiogenic heat. This enabled slow cooling and separation of the metallic melt into metal‐rich and sulfide‐rich fractions. This led to recrystallization of chondritic rock in contact with the metal accumulations and the crystallization of shock melts. Phosphorus was liberated from the metal and subsumed by the silicate shock melt, owing to oxidative conditions upon slow cooling. The melt was also a host for volatiles. Upon further cooling, phosphorus reacted with silicates leading to the formation of merrillite, while volatiles partitioned into the residual halogen‐rich, dry fluid. In the late stages, the fluid altered merrillite to patchy Cl/F‐apatite. The above sequence of alterations demonstrates that impact during the early evolution of chondritic parent bodies might have contributed to local metal segregation and silicate melting. In addition, postshock conditions supported secondary processes: compositional/textural equilibration, redistribution of volatiles, and fluid alterations.     

Localized shock melting in lherzolitic shergottite Northwest Africa 1950: Comparison with Allan Hills 77005

Abstract— The lherzolitic Martian meteorite Northwest Africa (NWA) 1950 consists of two distinct zones: 1) low‐Ca pyroxene poikilically enclosing cumulate olivine (Fo_70–75) and chromite, and 2) areas interstitial to the oikocrysts comprised of maskelynite, low‐ and high‐Ca pyroxene, cumulate olivine (Fo_68–71) and chromite. Shock metamorphic effects, most likely associated with ejection from the Martian subsurface by large‐scale impact, include mechanical deformation of host rock olivine and pyroxene, transformation of plagioclase to maskelynite, and localized melting (pockets and veins). These shock effects indicate that NWA 1950 experienced an equilibration shock pressure of 35–45 GPa. Large (millimeter‐size) melt pockets have crystallized magnesian olivine (Fo_78–87) and chromite, embedded in an Fe‐rich, Al‐poor basaltic to picro‐basaltic glass. Within the melt pockets strong thermal gradients (minimum 1 °C/μm) existed at the onset of crystallization, giving rise to a heterogeneous distribution of nucleation sites, resulting in gradational textures of olivine and chromite. Dendritic and skeletal olivine, crystallized in the melt pocket center, has a nucleation density (1.0 × 10³ crystals/mm²) that is two orders of magnitude lower than olivine euhedra near the melt margin (1.6 × 10⁵ crystals/mm²). Based on petrography and minor element abundances, melt pocket formation occurred by in situ melting of host rock constituents by shock, as opposed to melt injected into the lherzolitic target. Despite a common origin, NWA 1950 is shocked to a lesser extent compared to Allan Hills (ALH) 77005 (45–55 GPa). Assuming ejection in a single shock event by spallation, this places NWA 1950 near to ALH 77005, but at a shallower depth within the Martian subsurface. Extensive shock melt networks, the interconnectivity between melt pockets, and the ubiquitous presence of highly vesiculated plagioclase glass in ALH 77005 suggests that this meteorite may be transitional between discreet shock melting and bulk rock melting.     

Shock effects in the Willamette ungrouped iron meteorite

A slab of the Willamette ungrouped iron contains elongated troilite nodules (up to ~2 × 10 cm) that were crushed and penetrated by wedges of crushed metal during a major impact event. What makes this sample unique is the contrast between the large amount of shock damage and the very small (~1%) amounts of shock melting in the large troilite nodules. The postshock temperature was low, probably ?960 °C. The Widmanstätten pattern has been largely obscured by an episode of postshock annealing that caused recrystallization of the kamacite. The shock and thermal history of Willamette includes (1) initial crystallization and formation of multicentimeter‐size troilite nodules from trapped melt, (2) impact‐induced melting of metal‐sulfide assemblages to form lobate taenite masses a few hundred micrometers in size, (3) impact‐crushing of the nodules and jamming of metal wedges into them, (4) simultaneous crushing of metal grains adjacent to sulfide throughout the meteorite, (5) postshock annealing causing minor recrystallization of metal and troilite, and (6) a late‐stage shock event (and additional annealing) producing Neumann lines in the kamacite.     

Portales Valley: Petrology of a metallic‐melt meteorite breccia

Abstract— Portales Valley (PV) is an unusual metal‐veined meteorite that has been classified as an H6 chondrite. It has been regarded either as an annealed impact melt breccia, as a primitive achondrite, or as a meteorite with affinities to silicated iron meteorites. We studied the petrology of PV using a variety of geochemical‐mineralogical techniques. Our results suggest that PV is the first well‐documented metallic‐melt meteorite breccia. Mineral‐chemical and other data suggest that the protolith to PV was an H chondrite. The composition of FeNi metal in PV is somewhat fractionated compared to H chondrites and varies between coarse vein and silicate‐rich portions. It is best modeled as having formed by partial melting at temperatures of ?940–1150 °C, with incomplete separation of solid from liquid metal. Solid metal concentrated in the coarse vein areas and S‐bearing liquid metal concentrated in the silicate‐rich areas, possibly as a result of a surface energy effect. Both carbon and phosphorus must have been scavenged from large volumes and concentrated in metallic liquid. Graphite nodules formed by crystallization from this liquid, whereas phosphate formed by reaction between P‐bearing metal and clinopyroxene components, depleting clinopyroxene throughout much of the meteorite and growing coarse phosphate at metal‐silicate interfaces. Some phosphate probably crystallized from P‐bearing liquids, but most probably formed by solid‐state reaction at ?975‐725 °C. Phosphate‐forming and FeO‐reduction reactions were widespread in PV and entailed a change in the mineralogy of the stony portion on a large scale. Portales Valley experienced protracted annealing from supersolidus to subsolidus temperatures, probably by cooling at depth within its parent body, but the main differences between PV and H chondrites arose because maximum temperatures were higher in PV. A combination of a relatively weak shock event and elevated pre‐shock temperatures probably produced the vein‐and‐breccia texture, with endogenic heating being the main heat source for melting, and with stress waves from an impact event being an essential trigger for mobilizing metal. Portales Valley is best classified as an H7 metallic‐melt breccia of shock stage S1. The meteorite is transitional between more primitive (chondritic) and evolved (achondrite, iron) meteorite types and offers clues as to how differentiation could have occurred in some asteroidal bodies.     

Shock and thermal history of Northwest Africa 4859, an annealed impact‐melt breccia of LL chondrite parentage containing unusual igneous features and pentlandite

Abstract– Northwest Africa 4859 (NWA 4859) is a meteorite of LL chondrite parentage that shows unusual igneous features and contains widely distributed pentlandite. The most obvious unusual feature is a high proportion of large (≤3 cm diameter) igneous‐textured enclaves (LITEs), interpreted as shock melts that were intruded into an LL chondrite host. One such LITE appears to have been produced by whole rock melting of LL chondrite, initial rapid partial crystallization, and subsequent slow cooling of the residual melt in the host to produce a differentiated object. Other unusual features include mm‐sized “overgrowth objects,” fine‐grained plagioclase‐rich bands, and coarse troilite (≤7 mm across) grains. All these features are interpreted as having crystallized from melts produced by a single transient shock event, followed by slow cooling. A subsequent shock event of moderate (S3) intensity produced veining and transformed some of the pyroxene into the clinoenstatite polytype. Pentlandite (together with associated troilite) in NWA 4859 probably formed by the breakdown of a monosulfide precursor phase at low temperature (≤230 °C) following the second shock event. NWA 4859 is interpreted to be an unusual impact‐melt breccia that contains shock melt which crystallized in different forms at depth within the parent body.     

Spade: An H chondrite impact‐melt breccia that experienced post‐shock annealing

Abstract— The low modal abundances of relict chondrules (1.8 vol%) and of coarse (i.e., ≥200 μm‐size) isolated mafic silicate grains (1.8 vol%) in Spade relative to mean H6 chondrites (11.4 and 9.8 vol%, respectively) show Spade to be a rock that has experienced a significant degree of melting. Various petrographic features (e.g., chromite‐plagioclase assemblages, chromite veinlets, silicate darkening) indicate that melting was caused by shock. Plagioclase was melted during the shock event and flowed so that it partially to completely surrounded nearby mafic silicate grains. During crystallization, plagioclase developed igneous zoning. Low‐Ca pyroxene that crystallized from the melt (or equilibrated with the melt at high temperatures) acquired relatively high amounts of CaO. Metallic Fe‐Ni cooled rapidly below the Fe‐Ni solvus and transformed into martensite. Subsequent reheating of the rock caused transformation of martensite into abundant duplex plessite. Ambiguities exist in the shock stage assignment of Spade. The extensive silicate darkening, the occurrence of chromite‐plagioclase assemblages, and the impact‐melted characteristics of Spade are consistent with shock stage S6. Low shock (stage S2) is indicated by the undulose extinction and lack of planar fractures in olivine. This suggests that Spade reached a maximum prior shock level equivalent to stage S6 and then experienced post‐shock annealing (probably to stage S1). These events were followed by a less intense impact that produced the undulose extinction in the olivine, characteristic of shock stage S2. Annealing could have occurred if Spade were emplaced near impact melts beneath the crater floor or deposited in close proximity to hot debris within an ejecta blanket. Spade firmly establishes the case for post‐shock annealing. This may have been a common process on OC asteroids.     

Metal/sulfide–silicate intergrowth textures in EL3 meteorites: Origin by impact melting on the EL parent body

Abstract– We document the petrographic setting and textures of Fe,Ni metal, the mineralogy of metallic assemblages, and the modal mineral abundances in the EL3 meteorites Asuka (A‐) 881314, A‐882067, Allan Hills 85119, Elephant Moraine (EET) 90299/EET 90992, LaPaz Icefield 03930, MacAlpine Hills (MAC) 02635, MAC 02837/MAC 02839, MAC 88136, Northwest Africa (NWA) 3132, Pecora Escarpment 91020, Queen Alexandra Range (QUE) 93351/QUE 94321, QUE 94594, and higher petrologic type ELs Dar al Gani 1031 (EL4), Sayh al Uhaymir 188 (EL4), MAC 02747 (EL4), QUE 94368 (EL4), and NWA 1222 (EL5). Large metal assemblages (often containing schreibersite and graphite) only occur outside chondrules and are usually intergrown with silicate minerals (euhedral to subhedral enstatite, silica, and feldspar). Sulfides (troilite, daubréelite, and keilite) are also sometimes intergrown with silicates. Numerous authors have shown that metal in enstatite chondrites that are interpreted to have been impact melted contains euhedral crystals of enstatite. We argue that the metal/sulfide–silicate intergrowths in the ELs we studied were also formed during impact melting and that metal in EL3s thus does not retain primitive (i.e., nebular) textures. Likewise, the EL4s are also impact‐melt breccias. Modal abundances of metal in the EL3s and EL4s range from approximately 7 to 30 wt%. These abundances overlap or exceed those of EL6s, and this is consistent either with pre‐existing heterogeneity in the parent body or with redistribution of metal during impact processes.     

Redistribution of elements in the heavily shocked Yanzhuang chondrite

Abstract— Compositions of metal, sulfide, olivine, pyroxene, and plagioclase/plagioclase glass were studied for the melted and unmelted parts of the heavily shocked H6(S6) chondrite‐Yanzhuang. We found that the partitioning of some trace elements significantly changed between the 2 parts; compared with the corresponding minerals in the unmelted part, Ga is enriched in the metal, Co, Cr, and Zn are enriched in the sulfide, Cr is enriched in olivine and pyroxene, and Ti is enriched in the plagioclase glass of the melt pocket. These detailed studies of the mineral phases put constraints on 3 important parameters (temperature, pressure, and duration) associated with the post‐shock melting process. The coexistence of melted and unmelted olivine in the melt pocket of Yanzhuang implies a peak temperature after shock that approaches the melting point of olivine. The lack of Ni in the olivine crystallized from a melt suggests crystallization of olivine at pressures below 10 kbar. The resetting of Ga partitioning between metal and silicate in the melt pocket indicates that the interval from the peak temperature after shock to the crystallization of metal‐sulfide and plagioclase glass in the melted part of Yanzhuang is longer than 500 sec.     

NWA 1152 and Sahara 00182: New primitive carbonaceous chondrites with affinities to the CR and CV groups

Abstract— We have investigated the mineralogy, petrography, bulk chemistry, and light element isotope composition of the ungrouped chondrites North West Africa (NWA) 1152 and Sahara 00182. NWA 1152 contains predominantly type 1 porphyritic olivine (PO) and porphyritic olivinepyroxene (POP) chondrules. Chondrule silicates are magnesium‐rich (Fo_{98.8 ± 1.2}, n = 36; Fs_{2.3 ± 2.1} Wo_{1.2 ± 0.3}, n = 23). Matrix comprises ?40 vol% of the sample and is composed of a micron sized silicate groundmass with larger silicate, sulfide, magnetite, and Fe‐Ni metal (Ni ?50 wt%) grains. Phyllosilicates were not observed in the matrix. Refractory inclusions are rare (0.3 vol%) and are spinel pyroxene aggregates or amoeboid olivine aggregates; melilite is absent from the refractory inclusions. Sahara 00182 contains predominantly type 1 PO chondrules, POP chondrules are less common. Most chondrules contain blebs of, and are often rimmed with, Fe‐Ni metal and sulfide. Chondrule phenocrysts are magnesium‐rich (Fo_{92.2 ± 0.6}, n = 129; Fs_{4.4 ± 1.8} Wo_{1.3 ± 1.1}, n = 16). Matrix comprises ?30 vol% of the meteorite and is predominantly sub‐micron silicates, with rare larger silicate gains. Matrix Fe‐Ni metal (mean Ni = 5.8 wt%) and sulfide grains are up to mm scale. No phyllosilicates were observed in the matrix. Refractory inclusions are rare (1.1 vol%) and melilite is absent. The oxygen isotope composition of NWA 1152 falls within the range of the CV chondrites with δ¹⁷O = ?3.43%0 δ¹⁸O = 0.70%0 and is similar to Sahara 00182, δ¹⁷O = ?3.89%0, δ¹⁸O = ?0.19%0 (Grossman and Zipfel 2001). Based on mineralogical and petrographic characteristics, we suggest NWA 1152 and Sahara 00182 show many similarities with the CR chondrites, however, oxygen isotopes suggest affinity with the CVs. Thus, neither sample can be assigned to any of the currently known carbonaceous chondrite groups based on traditionally recognized characteristics. Both samples demonstrate the complexity of inter‐ and intra‐group relationships of the carbonaceous chondrites. Whatever their classification, N WA 1152 and Sahara 00182 represent a source of relatively pristine solar system material.     

Northwest Africa 4797: A strongly shocked ultramafic poikilitic shergottite related to compositionally intermediate Martian meteorites

Abstract– Northwest Africa (NWA) 4797 is an ultramafic Martian meteorite composed of olivine (40.3 vol%), pigeonite (22.2%), augite (11.9%), plagioclase (9.1%), vesicles (1.6%), and a shock vein (10.3%). Minor phases include chromite (3.4%), merrillite (0.8%), and magmatic inclusions (0.4%). Olivine and pyroxene compositions range from Fo_66–72,En_58–74Fs_19–28Wo_6–15, and En_46–60Fs_14–22Wo_34–40, respectively. The rock is texturally similar to “lherzolitic” shergottites. The oxygen fugacity was QFM?2.9 near the liquidus, increasing to QFM?1.7 as crystallization proceeded. Shock effects in olivine and pyroxene include strong mosaicism, grain boundary melting, local recrystallization, and pervasive fracturing. Shock heating has completely melted and vesiculated igneous plagioclase, which upon cooling has quench‐crystallized plagioclase microlites in glass. A mm‐size shock melt vein transects the rock, containing phosphoran olivine (Fo_69–79), pyroxene (En_44–51Fs_14–18Wo_30–42), and chromite in a groundmass of alkali‐rich glass containing iron sulfide spheres. Trace element analysis reveals that (1) REE in plagioclase and the shock melt vein mimics the whole rock pattern; and (2) the reconstructed NWA 4797 whole rock is slightly enriched in LREE relative to other intermediate ultramafic shergottites, attributable to local mobilization of melt by shock. The shock melt vein represents bulk melting of NWA 4797 injected during pressure release. Calculated oxygen fugacity for NWA 4797 indicates that oxygen fugacity is decoupled from incompatible element concentrations. This is attributed to subsolidus re‐equilibration. We propose an alternative nomenclature for “lherzolitic” shergottites that removes genetic connotations. NWA 4797 is classified as an ultramafic poikilitic shergottite with intermediate trace element characteristics.     

Northwest Africa 482: A crystalline impact‐melt breccia from the lunar highlands

Abstract— Northwest Africa 482 (NWA 482) is a crystalline impact‐melt breccia from the Moon with highlands affinities. The recrystallized matrix and the clast population are both highly anorthositic. Clasts are all related to the ferroan anorthosite suite, and include isolated plagioclase crystals and lithic anorthosites, troctolites, and spinel troctolites. Potassium‐, rare‐earth‐element‐, and phosphorus‐bearing (KREEP) and mare lithologies are both absent, constraining the source area of this meteorite to a highland terrain with little to no KREEP component, most likely on the far side of the Moon. Glass is present in shock veins cutting through the sample and in several large melt pockets, indicating a second impact event. There are two separate events recorded in the ⁴⁰Ar‐³⁹Ar system: one at ～3750 Ma, which completely reset the K‐Ar system, and one at ?2400 Ma, which caused only partial degassing. These events could represent, respectively, crystallization of the impact‐melt breccia and later formation of the glass, or the formation of the glass and a later thermal event. The terrestrial age of the meteorite is 8.6 ± 1.3 ka. This age corresponds well with the modest amount of weathering in the rock, in the form of secondary phyllosilicates and carbonates. Based on terrestrial age and location, lithology, and chemistry, NWA 482 is unique among known lunar meteorites.     

What’s up? Preservation of gravitational direction in the Larkman Nunatak 06299 LL impact melt breccia

Abstract– Larkman Nunatak (LAR) 06299 is a vesicular LL chondrite impact melt breccia that cooled rapidly (0.1–0.3 °C s^?1) during crystallization. Ar‐Ar data from the literature indicate that the impact event that formed this rock occurred approximately 1 Ga ago. About 30 vol% of the meteorite consists of a melt matrix containing faceted and intergrown mafic silicate grains (mainly 4–11 μm size olivine phenocrysts) partially to completely surrounded by 2–20 μm size patches of plagioclase. Suspended in the melt are 30–370 μm size ellipsoidal to spheroidal metal‐sulfide nodules (several hundred per thin section), many connected to 8–600 μm size ellipsoidal to spheroidal vesicles. Most of the metal‐sulfide nodules contain a large oblate metallic Fe‐Ni bleb at one end of the nodule. For approximately 90% of the nodules, the metal blebs are aligned on the same side of the nodules; for approximately 80% of the nodules that are adjacent to vesicles, the vesicles are attached to the opposite end of the nodules from the oblate metal blebs. Most of the oblate metal blebs themselves are flattened in a direction perpendicular to the long axis of the nodule/vesicle. These features result from alignment in the gravitational field on the LL parent asteroid, making LAR 06299 the first known chondrite to indicate gravitational direction. Using reasonable estimates of the cooling rate, viscosity of the metal‐sulfide melt, and asteroid density, as well as the observed sizes of constituent phases in LAR 06299, we obtain a lower limit of approximately 1.5 km for the radius of the LAR 06299 parent body. The body was probably substantially larger.     

Analyses of the chondritic meteorite Orvinio (H6): Insight into the origins and evolution of shocked H chondrite material

Abstract— We have studied the petrography, reflectance spectra, and Ar‐Ar systematics of the Orivinio meteorite. Orvinio is an H chondrite not an L chondrite as sometimes reported. The material in the meteorite was involved in several impact events. One impact event produced large swaths of impact melt from H chondrite material surrounding relict clasts of chondrule‐bearing material. Not only were portions of a bulk H chondrite planestesimal melted during the impact event, but shock redistribution of metal and sulfide phases in the meteorite dramatically altered its reflectance spectra. Both the melt and relict clasts are darker than unshocked H chondrite material, bearing spectral similarities to some C‐class asteroids. Such shock metamorphism, which lowers the albedo of an object without increasing its spectral slope, may partially explain some of the variation among S‐class asteroids and some of the trends seen on asteroid 433 Eros. Noble gases record the evidence of at least two, and perhaps three, impact events in the meteorite and its predecessor rocks. The most significant evidence is for an event that occurred 600 Ma ago or less, perhaps ?325 Ma ago or less. There is also a signature of 4.2 Ga in the Ar‐Ar systematics, which could either reflect complete degassing of the rock at that time or partial degassing of even the most retentive sites in the more recent event.     

Frontier Mountain 93001: A coarse‐grained,enstatite‐augite‐oligoclase‐rich,igneous rock from the acapulcoite‐lodranite parent asteroid

Abstract— The Frontier Mountain (FRO) 93001 meteorite is a 4.86 g fragment of an unshocked, medium‐ to coarse‐grained rock from the acapulcoite‐lodranite (AL) parent body. It consists of anhedral orthoenstatite (Fs_{13.3 ± 0.4}Wo_{3.1 ± 0.2}), augite (Fs_{6.1 ± 0.7}Wo_{42.3 ± 0.9}; Cr₂O₃ = 1.54 ± 0.03), and oligoclase (Ab_{80.5 ± 3.3}Or_{3.1 ± 0.6}) up to >1 cm in size enclosing polycrystalline aggregates of fine‐grained olivine (average grain size: 460 ± 210 μm) showing granoblastic textures, often associated with Fe,Ni metal, troilite, chromite (cr# = 0.91 ± 0.03; fe# = 0.62 ± 0.04), schreibersite, and phosphates. Such aggregates appear to have been corroded by a melt. They are interpreted as lodranitic xenoliths. After the igneous (the term “igneous” is used here strictly to describe rocks or minerals that solidified from molten material) lithology intruding an acapulcoite host in Lewis Cliff (LEW) 86220, FRO 93001 is the second‐known silicate‐rich melt from the AL parent asteroid. Despite some similarities, the silicate igneous component of FRO 93001 (i.e., the pyroxene‐plagioclase mineral assemblage) differs in being coarser‐grained and containing abundant enstatite. Melting‐crystallization modeling suggests that FRO 93001 formed through high‐degree partial melting (≥35 wt%; namely, ≥15 wt% silicate melting and ?20 wt% metal melting) of an acapulcoitic source rock, or its chondritic precursor, at temperatures ≥1200 °C, under reducing conditions. The resulting magnesium‐rich silicate melt then underwent equilibrium crystallization; prior to complete crystallization at ?1040 °C, it incorporated lodranitic xenoliths. FRO 93001 is the highest‐temperature melt from the AL parent‐body so far available in laboratory. The fact that FRO 93001 could form by partial melting and crystallization under equilibrium conditions, coupled with the lack of quench‐textures and evidence for shock deformation in the xenoliths, suggests that FRO 93001 is a magmatic rock produced by endogenic heating rather than impact melting.     

Differentiation processes in FeO‐rich asteroids revealed by the achondrite Lewis Cliff 88763

Olivine‐dominated (70–80 modal %) achondrite meteorite Lewis Cliff (LEW) 88763 originated from metamorphism and limited partial melting of a FeO‐rich parent body. The meteorite experienced some alteration on Earth, evident from subchondritic Re/Os, and redistribution of rhenium within the sample. LEW 88763 is texturally similar to winonaites, has a Δ¹⁷O value of ?1.19 ± 0.10‰, and low bulk‐rock Mg/(Mg+Fe) (0.39), similar to the FeO‐rich cumulate achondrite Northwest Africa (NWA) 6693. The similar bulk‐rock major‐, minor‐, and trace‐element abundances of LEW 88763, relative to some carbonaceous chondrites, including ratios of Pd/Os, Pt/Os, Ir/Os, and ¹⁸⁷Os/¹⁸⁸Os (0.1262), implies a FeO‐ and volatile‐rich precursor composition. Lack of fractionation of the rare earth elements, but a factor of approximately two lower highly siderophile element abundances in LEW 88763, compared with chondrites, implies limited loss of Fe‐Ni‐S melts during metamorphism and anatexis. These results support the generation of high Fe/Mg, sulfide, and/or metal‐rich partial melts from FeO‐rich parent bodies during partial melting. In detail, however, LEW 88763 cannot be a parent composition to any other meteorite sample, due to highly limited silicate melt loss (0 to <<5%). As such, LEW 88763 represents the least‐modified FeO‐rich achondrite source composition recognized to date and is distinct from all other meteorites. LEW 88763 should be reclassified as an anomalous achondrite that experienced limited Fe,Ni‐FeS melt loss. Lewis Cliff 88763, combined with a growing collection of FeO‐rich meteorites, such as brachinites, brachinite‐like achondrites, the Graves Nunataks (GRA) 06128/9 meteorites, NWA 6693, and Tafassasset, has important implications for understanding the initiation of planetary differentiation. Specifically, regardless of precursor compositions, partial melting and differentiation processes appear to be similar on asteroidal bodies spanning a range of initial oxidation states and volatile contents.     

Impact processing of chondritic planetesimals: Siderophile and volatile element fractionation in the Chico L chondrite

Abstract— A large impact event 500 Ma ago shocked and melted portions of the L‐chondrite parent body. Chico is an impact melt breccia produced by this event. Sawn surfaces of this 105 kg meteorite reveal a dike of fine‐grained, clast‐poor impact melt cutting shocked host chondrite. Coarse (1–2 cm diameter) globules of FeNi metal + sulfide are concentrated along the axis of the dike from metal‐poor regions toward the margins. Refractory lithophile element abundance patterns in the melt rock are parallel to average L chondrites, demonstrating near‐total fusion of the L‐chondrite target by the impact and negligible crystal‐liquid fractionation during emplacement and cooling of the dike. Significant geochemical effects of the impact melting event include fractionation of siderophile and chalcophile elements with increasing metal‐silicate heterogeneity, and mobilization of moderately to highly volatile elements. Siderophile and chalcophile elements ratios such as Ni/Co, Cu/Ga, and Ir/Au vary systematically with decreasing metal content of the melt. Surprisingly small (?10²) effective metal/silicate‐melt distribution coefficients for highly siderophile elements probably reflect inefficient segregation of metal despite the large degrees of melting. Moderately volatile lithophile elements such K and Rb were mobilized and heterogeneously distributed in the L‐chondrite impact breccias whereas highly volatile elements such as Cs and Pb were profoundly depleted in the region of the parent body sampled by Chico. Volatile element variations in Chico and other L chondrites are more consistent with a mechanism related to impact heating rather than condensation from a solar nebula. Impact processing can significantly alter the primary distributions of siderophile and volatile elements in chondritic planetesimals.