Scanning electron microscope‐cathodoluminescence (SEM‐CL) imaging of planar deformation features and tectonic deformation lamellae in quartz

Abstract– Planar deformation features (PDFs) in quartz are essential proof for the correct identification of meteorite impact structures and related ejecta layers, but can be confused with tectonic deformation lamellae. The only completely reliable method to demonstrate the shock origin of suspected (sub‐) planar microstructures, transmission electron microscope (TEM) observations, is costly and time consuming. We have used a cathodoluminescence (CL) detector attached to a scanning electron microscope (SEM) to image both PDFs and tectonic deformation lamellae in quartz to demonstrate the potential of a simple method to identify PDFs and define characteristics that allow their distinction from tectonic deformation lamellae. In both limited wavelength grayscale and composite color SEM‐CL images, PDFs are easily identified. They are straight, narrow, well‐defined features, whereas tectonic deformation lamellae are thicker, slightly curved, and there is often no clear boundary between lamella and host quartz. Composite color images reveal two types of CL behavior in PDFs: either they emit a red to infrared CL signal or they are nonluminescent. The color of the CL signal emitted by tectonic deformation lamellae ranges from blue to red. For comparison, we also imaged several shocked quartz grains at cryogenic temperature. In most cases, the PDF characteristics in cryo‐CL images do not differ significantly from those in images recorded at room temperature. We conclude that SEM‐CL imaging, especially when color composites are used, provides a promising, practical, low cost, and nondestructive method to distinguish between PDFs and tectonic lamellae, even when the simplest CL techniques available are used.     

Scanning electron microscopy,cathodoluminescence, and Raman spectroscopy of experimentally shock‐metamorphosed quartzite

Abstract— We studied unshocked and experimentally (at 12, 25, and 28 GPa, with 25, 100, 450, and 750°C pre‐shock temperatures) shock‐metamorphosed Hospital Hill quartzite from South Africa using cathodoluminescence (CL) images and spectroscopy and Raman spectroscopy to document systematic pressure or temperature‐related effects that could be used in shock barometry. In general, CL images of all samples show CL‐bright luminescent patchy areas and bands in otherwise nonluminescent quartz, as well as CL‐dark irregular fractures. Fluid inclusions appear dominant in CL images of the 25 GPa sample shocked at 750°C and of the 28 GPa sample shocked at 450°C. Only the optical image of our 28 GPa sample shocked at 25°C exhibits distinct planar deformation features (PDFs). Cathodoluminescence spectra of unshocked and experimentally shocked samples show broad bands in the near‐ultraviolet range and the visible light range at all shock stages, indicating the presence of defect centers on, e.g., SiO₄ groups. No systematic change in the appearance of the CL images was obvious, but the CL spectra do show changes between the shock stages. The Raman spectra are characteristic for quartz in the unshocked and 12 GPa samples. In the 25 and 28 GPa samples, broad bands indicate the presence of glassy SiO₂, while high‐pressure polymorphs are not detected. Apparently, some of the CL and Raman spectral properties can be used in shock barometry.     

Identification of shocked quartz by scanning cathodoluminescence imaging

Abstract— Quartz grains subjected to high‐strain‐rate shock waves owing to meteorite or cometary impact on Earth's surface commonly display shock lamellae. These lamellae appear as remarkably straight, thin, planar features (microstructures) in sets within which lamellae are essentially parallel to each other and spaced ≤ 20 μm apart. Two or more intersecting sets are typically present. Shock lamellae are commonly recognized and identified by optical methods, by use of the transmission electron microscope (TEM), and by etching polished sections and subsequent examination with a scanning electron microscope (SEM) operated in the secondary electron mode. We present here a method for observing planar microstructures in shocked quartz by using a cathodoluminescence (CL) detector attached to a SEM. The method relies on the fact that planar microstructures in quartz arising as a result of shock display no CL whatever; thus, they show up as distinct, thin, black lines on otherwise luminescent quartz grains. We used scanning CL imaging to study shocked quartz from the Ries Crater, Germany, a well‐known impact crater of Miocene age. We demonstrate that shock‐produced planar microstructures are clearly displayed in SEM‐CL images and can be distinguished from microfractures generated by tectonism, and subsequently filled with quartz, and other similar features not related to impact events. The SEM‐CL method provides a powerful supplement to other methods of identifying shocked quartz. It commonly provides better spatial resolution than does standard optical methods, and does not require etching of quartz grains. Further, it is easier and faster to use than are TEM methods, although it is not capable of the fine‐scale defect analysis possible with TEM.     

Coordinated isotopic and mineralogic analyses of planetary materials enabled by in situ lift‐out with a focused ion beam scanning electron microscope

Abstract— We describe a focused ion beam scanning electron microscope (FIB‐SEM) technique that enables coordinated isotopic and mineralogic analysis of planetary materials. We show that site‐specific electron‐transparent sections can be created and extracted in situ using a microtweezer and demonstrate that they are amenable to analysis by secondary ion mass spectrometry (SIMS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). These methods greatly advance the ability to address several fundamental questions in meteoritics, such as accretion and alteration histories of chondrules and the origin and history of preserved nebular and presolar materials.     

Cathodoluminescence microscopy and spectroscopy of forsterite from Kaba meteorite: An application to the study of hydrothermal alteration of parent body

Highly forsteritic olivine (Fo: 99.2–99.7) in the Kaba meteorite emits bright cathodoluminescence (CL). CL spectra of red luminescent forsterite grains have two broad emission bands at approximately 630 nm (impurity center of divalent Mn ions) in the red region and above 700 nm (trivalent Cr ions) in the red–IR region. The cores of the grains show CL blue luminescence giving a characteristic broad band emission at 400 nm, also associated with minor red emissions related to Mn and Cr ions. CL color variation of Kaba forsterite is attributed to structural defects. Electron probe microanalyzer (EPMA) analysis shows concentrations of Ca, Al, and Ti in the center of the forsterite grain. The migration of diffusible ions of Mn, Cr, and Fe to the rim of the Kaba meteoritic forsterite was controlled by the hydrothermal alteration at relatively low temperature (estimated at about 250 °C), while Ca and Al ions might still lie in the core. A very unusual phase of FeO (wüstite) was also observed, which may be a terrestrial alteration product of FeNi‐metal.     

Scanning electron microscopical and cross sectional analysis of extraterrestrial carbonaceous nanoglobules

Abstract— Carbonaceous nanoglobules are ubiquitous in carbonaceous chondrite (CC) meteorites. The Tagish Lake (C2) meteorite is particularly intriguing in containing an abundance of nanoglobules, with a wider range of forms and sizes than encountered in other CC meteorites. Previous studies by transmission electron microscopy (TEM) have provided a wealth of information on chemistry and structure. In this study low voltage scanning electron microscopy (SEM) was used to characterize the globule forms and external structures. The internal structure of the globules was investigated after sectioning by focused ion beam (FIB) milling. The FIB‐SEM analysis shows that the globules range from solid to hollow. Some hollow globules show a central open core, with adjoining smaller cores. The FIB with an SEM is a valuable tool for the analysis of extraterrestrial materials, even of sub‐micron‐sized “soft” carbonaceous particles. The rapid site‐specific cross‐sectioning capabilities of the FIB allow the preservation of the internal morphology of the nanoglobules, with minimal damage or alteration of the unsectioned areas.     

MicroRaman spectroscopy of anomalous planar microstructures in quartz from Mt. Oikeyama: Discovery of a probable impact crater in Japan

Abstract– Planar deformation features (PDFs) and planar fractures (PFs) have been found and confirmed by optical microscope observations and microRaman spectroscopy in quartz grains from Mt. Oikeyama (Akaishi Mountains, Central Japan), for which the semicircular topographic feature of the ridge suggests a crater formed by an impact event. According to the optical microscope observations, a low shock pressure (8–10 GPa) is estimated by the occurrence of basal or ω PDFs leading to lack of multiple sets of PDFs. In addition, a new type of planar microstructure was found in several quartz grains. The microRaman characteristics of PDFs in quartz from Mt. Oikeyama show the amorphous state indicating the presence of weak broad bands at 400 and 800 cm^?1 peak positions. These characteristics are indicative of PDFs that are limited to shocked quartz. This indicates an impact origin for distinct planar microstructures in quartz from Mt. Oikeyama.     

Experimental reproduction of tectonic deformation lamellae in quartz and comparison to shock‐induced planar deformation features

Abstract— Planar features can develop in quartz during comparatively slow tectonic deformation and during very fast dynamic shock metamorphism. Despite their very different structural nature, tectonically induced deformation lamellae have sometimes been mistaken as shock‐induced planar deformation features (PDFs). To understand the formation of deformation lamellae and to address the substantial differences between them and PDFs, we have conducted deformation experiments on single crystals of quartz in a Griggs‐type apparatus, at a temperature of 800 °C, a confining pressure of 12 kbar, and a strain rate of 0.7–1.1 · 10^?6. The deformed samples were analyzed with transmission electron microscopy (TEM) and compared to natural PDFs from the Ries Crater, Germany. TEM revealed that tectonic deformation lamellae are associated with numerous sub‐parallel curved subgrain walls, across which the orientation of the crystal changes slightly. The formation of deformation lamellae is due to glide‐ and climb‐controlled deformation in the exponential creep regime. In contrast, the PDFs in shocked quartz from the Ries are perfectly planar, crystallographically controlled features that originally represented amorphous lamellae. Due to post‐shock annealing and hydrothermal activity they are recrystallized and decorated with fluid inclusions.     

Shock‐metamorphic microfeatures in chert from the Jebel Waqf as Suwwan impact structure,Jordan

Abstract– The petrographic investigation of a shocked, chalcedony‐, quartzine‐, and quartz‐bearing allochthonous chert nodule (probably Upper Cretaceous) recovered from surficial wadi gravels in the inner parts of the central uplift of the approximately 6 km in diameter Jebel Waqf as Suwwan impact structure, Jordan, reveals new potential shock indicators in microfibrous–spherulitic silica, in addition to well‐established shock‐metamorphic effects in coarser crystalline quartz. The microcrystalline chert groundmass exhibits a macroscopic dendritic and suborthogonal fracture pattern commonly associated with thin “recrystallization bands” that intersect the pre‐existing diagenetic chert fabric. Fibrous aggregates of quartzine spherulites in chalcedony‐quartzine‐quartz veinlets locally have a shattered appearance and show conspicuous “curved fractures” perpendicular to the quartzine fiber direction (and parallel to [0001]) that commonly trend subparallel to planar fractures (PFs) in neighboring shocked quartz. Quartz exhibits PFs, feather features (FFs), and mainly single sets of planar deformation features (PDFs) parallel to the basal plane (0001) (Brazil twins) and, rarely, additional PDFs parallel to {101¯3}. Shock petrography indicates shock pressures of ≥10 GPa and high shock‐induced differential stresses that affected the chert nodule. The internal crosscutting relationships of primary diagenetic and impact‐related deformational features together with shockpressure estimates suggest that the curved fractures across quartzine spherulites might represent specific (low‐ to medium‐pressure) shock‐metamorphic features, possibly in structural analogy to basal plane PFs in quartz. The dendritic–suborthogonal fractures in the microcrystalline chert groundmass and recrystallization bands are likely related to impact‐induced shear deformation and recrystallization, respectively, and cannot be considered as definite shock indicators.     

Cathodoluminescence of moldavites

A systematic study of a large set of moldavites and the application of cathodoluminescence (CL)‐spectroscopy with a detailed discussion of spectral features is presented. Optical CL microscopy and spectroscopy (OM‐CL) were performed on 57 moldavite samples from different substrewn‐fields in Germany and the Czech Republic. The extracted CL data were supported by SEM‐EDX analysis. In general, two different kinds of CL colors can be distinguished: different shades of green in the matrix of the tektite glasses and a variation of blue color for lechatelierite inclusions (a pure silica‐glass phase). Spectral analysis of these colors shows three CL emission bands for green and five bands for blue c. Most CL activators are structural defects of the local glass network, influenced by the crystal field. The visible green CL emission is caused by defects related to strong local disorder as well as Al‐O^?‐Al defects. The blue CL emission is activated by different types of lattice defects such as nonbridging oxygen‐hole center (NBOHC), self‐trapped excitons (STE), and oxygen deficiency centers (ODC). Intensity variations of the CL emissions were observed for samples from the different localities, but there is no direct correlation between substrewn‐fields and CL characteristics. Nevertheless, CL microscopy is a powerful tool for the high‐contrast visualization of internal textures such as streaks and lechatelierite in the tektite matrix due to the luminescence properties of the defect structures in the glassy network.     

Shock metamorphism in plagioclase and selective amorphization

Plagioclase feldspar is one of the most common rock‐forming minerals on the surfaces of the Earth and other terrestrial planetary bodies, where it has been exposed to the ubiquitous process of hypervelocity impact. However, the response of plagioclase to shock metamorphism remains poorly understood. In particular, constraining the initiation and progression of shock‐induced amorphization in plagioclase (i.e., conversion to diaplectic glass) would improve our knowledge of how shock progressively deforms plagioclase. In turn, this information would enable plagioclase to be used to evaluate the shock stage of meteorites and terrestrial impactites, whenever they lack traditionally used shock indicator minerals, such as olivine and quartz. Here, we report on an electron backscatter diffraction (EBSD) study of shocked plagioclase grains in a metagranite shatter cone from the central uplift of the Manicouagan impact structure, Canada. Our study suggests that, in plagioclase, shock amorphization is initially localized either within pre‐existing twins or along lamellae, with similar characteristics to planar deformation features (PDFs) but that resemble twins in their periodicity. These lamellae likely represent specific crystallographic planes that undergo preferential structural failure under shock conditions. The orientation of preexisting twin sets that are preferentially amorphized and that of amorphous lamellae is likely favorable with respect to scattering of the local shock wave and corresponds to the “weakest” orientation for a specific shock pressure value. This observation supports a universal formation mechanism for PDFs in silicate minerals.     

Infrared,Raman, and cathodoluminescence studies of impact glasses

Abstract— We studied the infrared reflectance (IR), Raman, and cathodoluminescence (CL) spectroscopic signatures and scanning electron microscope‐cathodoluminescence (SEM‐CL) images of three different types of impact glasses: Aouelloul impact glass, a Muong Nong‐type tektite, and Libyan desert glass. Both backscattered electron (BSE) and CL images of the Muong Nong‐type tektite are featureless; the BSE image of the Libyan desert glass shows only weak brightness contrasts. For the Aouelloul glass, both BSE and CL images show distinct brightness contrast, and the CL images for the Libyan desert glass show spectacular flow textures that are not visible in any other microscopic method. Compositional data show that the SiO₂ composition is relatively higher and the Al₂O₃ content is lower in the CL‐bright areas than in the CL‐dark regions. The different appearance of the three glass types in the CL images indicates different peak temperatures during glass formation: the tektite was subjected to the highest temperature, and the Aouelloul impact glass experienced a relatively low formation temperature, while the Libyan desert glass preserves a flow texture that is only visible in the CL images, indicating a medium temperature. All IR reflectance spectra show a major band at around 1040 to 1110 cm^?1 (antisymmetric stretching of SiO₄ tetrahedra), with minor peaks between 745 and 769 cm^?1 (Si‐O‐Si angle deformation). Broad bands at 491 and 821 cm^?1 in the Raman spectra in all samples are most likely related to diaplectic glass remnants, indicating early shock amorphization followed by thermal amorphization. The combination of these spectroscopic methods allows us to deduce information about the peak formation temperature of the glass, and the CL images, in particular, show glass flow textures that are not preserved in other more conventional petrographic images.     

Microstructural study of micron‐sized craters simulating Stardust impacts in aluminum 1100 targets

Abstract— Various microscopic techniques were used to characterize experimental microcraters in aluminum foils to prepare for the comprehensive analysis of the cometary and interstellar particle impacts in aluminum foils to be returned by the Stardust mission. First, scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy (EDS) were used to study the morphology of the impact craters and the bulk composition of the residues left by soda‐lime glass impactors. A more detailed structural and compositional study of impactor remnants was then performed using transmission electron microscopy (TEM), EDS, and electron diffraction methods. The TEM samples were prepared by focused ion beam (FIB) methods. This technique proved to be especially valuable in studying impact crater residues and impact crater morphology. Finally, we also showed that infrared microscopy (IR) can be a quick and reliable tool for such investigations. The combination of all of these tools enables a complete microscopic characterization of the craters.     

Progressive deformation of feldspar recording low‐barometry impact processes,Tenoumer impact structure,Mauritania

The Tenoumer impact structure is a small, well‐preserved crater within Archean to Paleoproterozoic amphibolite, gneiss, and granite of the Reguibat Shield, north‐central Mauritania. The structure is surrounded by a thin ejecta blanket of crystalline blocks (granitic gneiss, granite, and amphibolite) and impact‐melt rocks. Evidence of shock metamorphism of quartz, most notably planar deformation features (PDFs), occurs exclusively in granitic clasts entrained within small bodies of polymict, glass‐rich breccia. Impact‐related deformation features in oligoclase and microcline grains, on the other hand, occur both within clasts in melt‐breccia deposits, where they co‐occur with quartz PDFs, and also within melt‐free crystalline ejecta, in the absence of co‐occurring quartz PDFs. Feldspar deformation features include multiple orientations of PDFs, enhanced optical relief of grain components, selective disordering of alternate twins, inclined lamellae within alternate twins, and combinations of these individual textures. The distribution of shock features in quartz and feldspar suggests that deformation textures within feldspar can record a wide range of average pressures, starting below that required for shock deformation of quartz. We suggest that experimental analysis of feldspar behavior, combined with detailed mapping of shock metamorphism of feldspar in natural systems, may provide critical data to constrain energy dissipation within impact regimes that experienced low average shock pressures.     

Cover

Cover: Upper left: High‐resolution mosaic of section ALH 84001,82 (~30 μm thick) from Martian meteorite Allan Hills 84001. Several highly detailed transmitted light images, obtained with a Zeiss Scope petrographic microscope at magnification of 500× and with crossed nicols (polarizers), were merged to create this mosaic. A grid was superimposed onto the image (square size is 1 mm²) to navigate around the section and (re)locate regions of interest. D5 and J7 are regions that contain a particularly high concentration of carbonates. The images were obtained at the Institute of Space Sciences (ICE, IEEC/CSIC) by Carles E. Moyano‐Cambero, who also created the mosaic. For details see the article on p. 1030. Upper right: Detail of region D5 in the mosaic. Cathodoluminescence image, obtained with a Nikon Eclipse LV100NPol petrographic microscope at 100× magnification, after applying electron bombardment in the sample with a Cambridge Image Technology Ltd. (CITL) Technosyn cold cathodoluminescent MK4 operated at a voltage of 20–24 kV and an intensity of 350–400 mA. The light emitted during electron bombardment of a mineral has intensity and wavelength that depends on its chemical composition and crystallographic structure, and even trace amounts of some elements can act as activators or quenchers of cathodoluminescence. Since iron is a typical quencher, iron‐free minerals can be particularly luminescent. In this case, bright red areas correspond to very Fe‐poor and Mn‐rich layers in the carbonates. This and the following images were obtained at the Universidad Complutense de Madrid by M. Isabel Benito. Lower left: Detail of the region D5 of the mosaic. Transmitted light image, obtained with a Nikon Eclipse LV100NPol petrographic microscope at 100× magnification and with crossed nicols. Carbonates are the brown‐to‐orange areas, while the large dark blue area is maskelynite (shock modified plagioclase). Lower right: BSE image of one of the spherical carbonates in D5 obtained with a JEOL JSM7600F SEM with a BSED (magnification 1,100×, voltage of 15 kV). The SEM was used to select regions and points of interest for subsequent chemical analysis by electron microprobe. The Fe‐rich and Mg‐rich rims of the carbonate can be clearly observed as bright and dark rims, respectively.     

ANIE: A mathematical algorithm for automated indexing of planar deformation features in quartz grains

Abstract– Planar deformation features (PDFs) in quartz, one of the most commonly used diagnostic indicators of shock metamorphism, are planes of amorphous material that follow crystallographic orientations, and can thus be distinguished from non‐shock‐induced fractures in quartz. The process of indexing data for PDFs from universal‐stage measurements has traditionally been performed using a manual graphical method, a time‐consuming process in which errors can easily be introduced. A mathematical method and computer algorithm, which we call the Automated Numerical Index Executor (ANIE) program for indexing PDFs, was produced, and is presented here. The ANIE program is more accurate and faster than the manual graphical determination of Miller–Bravais indices, as it allows control of the exact error used in the calculation and removal of human error from the process.     

Atom‐probe tomography and transmission electron microscopy of the kamacite–taenite interface in the fast‐cooled Bristol IVA iron meteorite

We report the first combined atom‐probe tomography (APT) and transmission electron microscopy (TEM) study of a kamacite–tetrataenite (K–T) interface region within an iron meteorite, Bristol (IVA). Ten APT nanotips were prepared from the K–T interface with focused ion beam scanning electron microscopy (FIB‐SEM) and then studied using TEM followed by APT. Near the K‐T interface, we found 3.8 ± 0.5 wt% Ni in kamacite and 53.4 ± 0.5 wt% Ni in tetrataenite. High‐Ni precipitate regions of the cloudy zone (CZ) have 50.4 ± 0.8 wt% Ni. A region near the CZ and martensite interface has <10 nm sized Ni‐rich precipitates with 38.4 ± 0.7 wt% Ni present within a low‐Ni matrix having 25.5 ± 0.6 wt% Ni. We found that Cu is predominantly concentrated in tetrataenite, whereas Co, P, and Cr are concentrated in kamacite. Phosphorus is preferentially concentrated along the K‐T interface. This study is the first precise measurement of the phase composition at high spatial resolution and in 3‐D of the K‐T interface region in a IVA iron meteorite and furthers our knowledge of the phase composition changes in a fast‐cooled iron meteorite below 400 °C. We demonstrate that APT in conjunction with TEM is a useful approach to study the major, minor, and trace elemental composition of nanoscale features within fast‐cooled iron meteorites.     

Shock effects in plagioclase feldspar from the Mistastin Lake impact structure,Canada

Shock metamorphism, caused by hypervelocity impact, is a poorly understood process in feldspar due to the complexity of the crystal structure, the relative ease of weathering, and chemical variations, making optical studies of shocked feldspars challenging. Understanding shock metamorphism in feldspars, and plagioclase in particular, is vital for understanding the history of Earth's moon, Mars, and many other planetary bodies. We present here a comprehensive study of shock effects in andesine and labradorite from the Mistastin Lake impact structure, Labrador, Canada. Samples from a range of different settings were studied, from in situ central uplift materials to clasts from various breccias and impact melt rocks. Evidence of shock metamorphism includes undulose extinction, offset twins, kinked twins, alternate twin deformation, and partial to complete transformation to diaplectic plagioclase glass. In some cases, isotropization of alternating twin lamellae was observed. Planar deformation features (PDFs) are notably absent in the plagioclase, even when present in neighboring quartz grains. It is notable that various microlites, twin planes, and compositionally different lamellae could easily be mistaken for PDFs and so care must be taken. A pseudomorphous zeolite phase (levyne‐Ca) was identified as a replacement mineral of diaplectic feldspar glass in some samples, which could, in some instances, also be potentially mistaken for PDFs. We suggest that the lack of PDFs in plagioclase could be due to a combination of structural controls relating to the crystal structure of different feldspars and/or the presence of existing planes of weakness in the form of twin and cleavage planes.     

The Keurusselkä impact structure,Finland—Impact origin confirmed by characterization of planar deformation features in quartz grains

Abstract– Although the meteorite impact origin of the Keurusselkä impact structure (central Finland) has been established on the basis of the occurrence of shatter cones, no detailed microscopic examination of the impactites from this structure has so far been made. Previous microscope investigations of in situ rocks did not yield any firm evidence of shock features (Raiskila et al. 2008; Kinnunen and Hietala 2009). We have carried out microscopic observations on petrographic thin sections from seven in situ shatter cone samples and report here the discovery of planar fractures (PFs) and planar deformation features (PDFs) in quartz and feldspar grains. The detection and characterization of microscopic shock metamorphic features in the investigated samples substantiates a meteorite impact origin for the Keurusselkä structure. The crystallographic orientations of 372 PDF sets in 276 quartz grains were measured, using a universal stage (U‐stage) microscope, for five of the seven distinct shatter cone samples. Based on our U‐stage results, we estimate that investigated shatter cone samples from the Keurusselkä structure have experienced peak shock pressures from approximately 2 GPa to slightly less than 20 GPa for the more heavily shocked samples. The decoration of most of the PDFs with fluid inclusions also indicates that these originally amorphous shock features were altered by postimpact processes. Finally, our field observations indicate that the exposed surface corresponds to the crater floor; it is, however, difficult to estimate the exact diameter of the structure and the precise amount of material that has been eroded since its formation.     

Focused ion beam recovery of hypervelocity impact residue in experimental craters on metallic foils

Abstract— The Stardust sample return capsule returned to Earth in January 2006 with primitive debris collected from comet 81P/Wild‐2 during the flyby encounter in 2004. In addition to the cometary particles embedded in low‐density silica aerogel, there are microcraters preserved in the aluminum foils (1100 series; 100 μm thick) that are wrapped around the sample tray assembly. Soda lime spheres (?49 μm in diameter) have been accelerated with a light gas gun into flight‐grade aluminum foils at 6.35 km s^?1 to simulate the capture of cometary debris. The experimental craters have been analyzed using scanning electron microscopy (SEM) and X‐ray energy dispersive spectroscopy (EDX) to locate and characterize remants of the projectile material remaining within the craters. In addition, ion beam‐induced secondary electron imaging has proven particularly useful in identifying areas within the craters that contain residue material. Finally, high‐precision focused ion beam (FIB) milling has been used to isolate and then extract an individual melt residue droplet from the interior wall of an impact. This has enabled further detailed elemental characterization that is free from the background contamination of the aluminum foil substrate. The ability to recover “pure” melt residues using FIB will significantly extend the interpretations of the residue chemistry preserved in the aluminum foils returned by Stardust.