Durability assessment of the Ala?at? tuff (Izmir) in western Turkey

Ala?at? tuff has been used extensively as a source of building stone for outdoor and indoor decorations since the historical times in and around the tourist town of Ala?at? (western Turkey). The use of the Alacati tuff in buildings has been made compulsory by the Ala?at? municipality, for preserving the historical appearance of the buildings, after 2005 in Ala?at?. It has been noticed that, evident deteriorations developed in tuff surfaces of the stone buildings and garden walls within 5?C6?years of their emplacement. Durability properties of the Ala?at? tuff are evaluated by determining the mineralogical, chemical, and physico-mechanical properties of the fresh tuff samples obtained from the only operative quarry in the area. Ageing tests such as Na₂SO₄ and MgSO₄ salt crystallization, freezing?Cthawing, and wetting?Cdrying were conducted on the fresh tuff samples to assess their durability. Additionally, the durability of the tuff is also evaluated by determining its average pore diameter, saturation coefficient, wet-to-dry strength ratio, static rock and slake-durability indices. Fresh Ala?at? tuff has high porosity and low unit weight and strengths and are classified to be very poor to moderately durable stone based on the test results of different durability assessment methods. Mineralogical and geochemical analyses have also been carried out on the deteriorated tuff samples collected from the surfaces of the stone buildings to determine the effect of weathering on tuff and the test results have been compared with those of the fresh tuff samples. There is no major difference observed between the mineralogy and chemistry of the fresh and weathered tuff samples thus, it has been concluded that physical weathering has been dominant in the area in deterioration of tuff.     

Water absorption process effect on strength of Ayazini tuff,such as the uniaxial compressive strength (UCS), flexural strength and freeze and thaw effect

Tuffs have been used as a construction material possibly since ancient times. In Afyonkarahisar, Turkey, there are numerous buildings constructed by tuff. Tuff has been a local construction material, during the Roman, Seljuk and Ottoman periods. Even though tuffs have relatively low durability and low strength values compared to marble, etc., they have survived with no major deterioration failures on many historical buildings. It has also been preferred because of its high porous texture, lightweight and easy shaping and process properties in the building sector. Naturally, it would be easily affected by water and humidity because of its porous structure. However, having this kind of structure leads to poor durability properties due to keeping water in it. The main objective of this study was to evaluate the physical and mechanical properties of the tuff quarried from the region and possible water effect, which may lead to degradation of its strength and durability of the material, thereby shortening the life span of the building structure used. Samples, which were tested after exposing to water and the freeze and thaw effects, were measured at a certain time. In this study, uniaxial compressive strength and flexural strength tests were conducted on test samples. The test results indicate that water may deteriorate the tuff’s strength properties and durability of the materials in due time.     

Environmental impact assessment on water quality deterioration caused by the decreased Ganges outflow and saline water intrusion in south-western Bangladesh

 This paper deals with an environmental impact assessment of low water flow in the river Ganges during a dry period at the Khulna and Mongla port areas in south-western Bangladesh. Large-scale surface water withdrawal in India after commissioning the Farakka Barrage causes a drastic fall in the Ganges low-flow condition within the Bangladesh territory during every dry period. The average lowest discharge in the Ganges is 552 m³/s, which is about 73% less than that in the pre-Farakka time. This has caused the deterioration of both surface and groundwater quality of the study area. Salinity is the principal cause of water quality degradation in the area. Present observation shows that the surface water of the area is sulphate-chloride dominated, which signifies high salinity whereas the groundwater is categorized as of medium to high salinity. To maintain the Rupsa River's maximum salinity below 1000 μS/cm the discharge in the Ganges should be ∼1500 m³/s, whereas that at Garai basin is ∼10 m³/s. If this present situation continues it will be a crippling blow to the environment of the area in the long term. An integrated multidisciplinary approach to hydrogeological research is urgently required to salvage the area from further deterioration. Received: 9 August 1999 · Accepted: 8 March 2000     

Deterioration mechanisms of tuffs in Midas monument

Slightly weathered white and pink tuffs of the Midas monument have deterioration problems. In this study, depths and characteristics of the weathering zones developed within the tuffs are investigated through optical microscopy, X-ray diffractometry (XRD), chemical analyses, scanning electron microscopy (SEM) and some index parameters. Accelerated weathering tests including wetting–drying, freezing–thawing and salt crystallization are performed, and durability assessment methods are used to predict the durabilities of the tuffs. The findings are compared with field observations. By examining quantitative weathering indices and comparing them with thin section studies, it is found that thin section analyses of the crystals, LoI, and WPI are good indicators to quantify the depth of weathering for the tuffs. However, thin section studies have limited value for fine-grained tuffaceous matrix. The chemical weathering of the tuffs produces weathered zones that are 4.5-cm thick within the white tuff and 2.5-cm thick within the pink tuff. Physical weathering causes scaling of outer layers of the tuffs and fracturing of feldspars along their cleavage planes. However, variations of the index properties of the tuffs due to weathering are not so significant to quantify the weathering depths in the tuffs. Among the accelerated weathering tests, salt crystallization is found to be the most destructive environmental condition. Pigeon droppings rich in NO₃¹⁻ are found to be the main source of soluble salt at the Midas monument. The salt transported up by capillary rise due to surface water causes spalling of the tuffs in the capillary zone. Surface water and salt of any kind in the close vicinity of the monument should be totally eliminated for the purpose of conservation. Field observations and the durability equations reveal that the white tuff is less durable than the pink tuff. Wet-to-dry strength ratio yields a better stone durability assessment among various durability methods used in this study.     

Environmental pollution of Udaisagar lake and impact of phosphate mine, Udaipur, Rajasthan, India

 The study of water chemistry and sediment core samples from Udaisagar lake in Rajasthan has revealed high phosphate contents; 186 and 236 μg/l in surface and sub-surface waters and in core samples 0.157 wt % P₂O₅, low D.O. 4.61 and 3.50 mg/l on average in surface and depth waters and high E.C. 1316 and 1395 μs/cm and higher sedimentation rate 8.90 mm/year in this lake compared to other lakes in the vicinity. The enormous and wide-spread growth of algal bloom in lake water and Ahar river and occasional fish mortality are indications of eutrophic conditions prevailing in the lake. Such a situation is developing due to the discharge of pollutants from phosphorite mines, chemical factories, distillary, sewage and domestic waste from settlements, hotels throughout the length of River Ahar which during its journey receives and finally discharges pollution in this lake. This renders the water unhygenic for human consumption and deleterious to aquatic life. Received: 27 January 1998 · Accepted: 28 September 1998     

Surface analysis of particles in mine tailings by time-of-flight laser-ionization mass spectrometry (TOF-LIMS)

  Time-of-flight laser-ionization mass spectrometry was applied to study the chemical composition of mineral particle surfaces in a sulphide-rich mine-tailings impoundment. This surface-sensitive technique provides chemical information from surfaces of irregularly shaped mineral particles (both conductive and insulators) less than 100 μm in diameter, which are considered to be representative of particle surface coatings in the tailings pile (after drying). In addition, depth profiles in the mineral particles were obtained. The combination of speed of analysis (1 min), small beam-diameter (2–4 μm), surface sensitivity (2–10 nm), trace-element sensitivity, and capability to analyze rough surfaces makes this method useful as a complement to studies of pore-water geochemistry and tailings mineralogy. As an example, the behavior of Pb and As in the Kidd Creek tailings dam near Timmins, Ontario, Canada, was studied, using a combination of surface analyses, and pore-water geochemical data. Received: 22 February 1995 / Accepted: 6 January 1996     

The influence of marine inflows on the chemical composition of groundwater in small islands: the example of the Cyclades (Greece)

 Marine contamination of groundwater may be caused by seawater intrusion and by salt spray. The role of both processes was studied in the Cyclades archipelago on four small islands (45–195 km²) whose aquifers consist essentially of fractured, weathered metamorphic rocks. Annual rainfall ranges from 400 to 650 mm and precipitation has high total dissolved solids contents of 45–223 mg l^–1. The chemical characteristics of the groundwater, whose salinity is from 0.4 to 22 g l^–1, are strongly influenced by seawater intrusion. However, the effect of atmospheric input is shown in certain water sampling locations on high ground elevation where the dissolved chloride contents may attain 200 mg l^–1. Received: 14 November 1995 · Accepted: 9 September 1996     

Geochemistry and stratigraphic correlation of basalt lavas beneath the Idaho Chemical Processing Plant, Idaho National Engineering Laboratory

 Thirty-nine samples of basaltic core were collected from wells 121 and 123, located approximately 1.8 km apart north and south of the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory. Samples were collected from depths ranging from 15 to 221 m below land surface for the purpose of establishing stratigraphic correlations between these two wells. Elemental analyses indicate that the basalts consist of three principal chemical types. Two of these types are each represented by a single basalt flow in each well. The third chemical type is represented by many basalt flows and includes a broad range of chemical compositions that is distinguished from the other two types. Basalt flows within the third type were identified by hierarchical K-cluster analysis of 14 representative elements: Fe, Ca, K, Na, Sc, Co, La, Ce, Sm, Eu, Yb, Hf, Ta, and Th. Cluster analyses indicate correlations of basalt flows between wells 121 and 123 at depths of approximately 38–40 m, 125–128 m, 131–137 m, 149–158 m, and 183–198 m. Probable correlations also are indicated for at least seven other depth intervals. Basalt flows in several depth intervals do not correlate on the basis of chemical compositions, thus reflecting possible flow margins in the sequence between the wells. Multi-element chemical data provide a useful method for determining stratigraphic correlations of basalt in the upper 1–2 km of the eastern Snake River Plain. Received: 16 February 1996 · Accepted: 1 April 1996     

Natural and anthropogenic influences on the geochemistry of Quaternary lake sediments from Holzmaar, Germany

 The accumulation of heavy metals and trace elements has been investigated in a well laminated sequence of Holocene and late Pleistocene lake sediments composed of diatomaceous gyttja, tuff and silt and clay sediments. Varve chronology of the annually deposited gyttja yielded a continuous high-resolution time sequence and allowed the absolute age dating of the sediment. Fluxes of elements remained largely uniform from the late Pleistocene into the Holocene (12 867–2 364 VT years ago; VT: varve time, years before 1950). Higher trace element and heavy metal fluxes occur from 2 322 to 862 VT years ago and reached their maxima in the uppermost sediments (<845 VT years ago). These increasing element fluxes correlate with increasing inputs of clastic material. The changing accumulation rates are the result of elevated soil erosion in the lake catchment caused by human settlement, deforestation and agricultural activities. Thus disturbances of the natural geochemical cycles of the Holzmaar region have occurred since the beginning of the Iron Age and especially since the beginning of the Middle Ages. Received: 29 May 1996 · Accepted: 19 August 1996     

Growth, annealing and recrystallization of zircon and preservation of monazite in high-grade metamorphism: conventional and in-situ U-Pb isotope, cathodoluminescence and microchemical evidence

Zircon and monazite from granulite- to amphibolite-facies rocks of the Vosges mountains (central Variscan Belt, eastern France) were dated by ion-microprobe and conventional U-Pb techniques. Different granulites of igneous (so-called leptynites) and sedimentary origin (kinzigites) and their leucosomes were dated at 334.9 ± 3.6, 335.4 ± 3.6 and 336.7 ± 3.5 Ma (conventional age 335.4 ± 0.6 Ma). Subsequent growth stages of zircon were distinguished by secondary electron (SEM) and cathodoluminescence (CL) imaging: (1) subsolidus growth producing round anhedral morphologies and sector zoning; (2) appearance of an intergranular fluid or melt phase at incipient dehydration melting that first resulted in resorption of pre-existing zircons, followed by growth of acicular zircons or overgrowths on round zircons consisting of planar growth zoning; (3) advanced melting producing euhedral prismatic zircons with oscillatory zoning overgrowing the sector zones. Two further lithologies, the Kaysersberg granite and the Trois-Epis units, were both formerly considered as migmatites. The intrusion of the Kaysersberg granite was dated at 325.8 ± 4.8 Ma. The Trois-Epis unit was found to be the product of volume recrystallization of a former granulite, which occurred under amphibolite-facies conditions 327.9 ± 4.4 Ma ago. The amphibolite-facies overprint of the Trois-Epis zircons led to the complete rejuvenation of most of the zircon domains by annealing and replacement/recrystallization processes. Annealing is assumed to occur in strained lattice domains, which are possibly disturbed by high trace element contents and/or large differences in decay damage between adjacent growth zones. Investigation of cathodoluminescence structures reveals that the replacement occurs along curved chemical reaction fronts that proceed from the surface towards the interior of the zircon. The monazite U-Pb system still records the age of high-grade metamorphism at around 335 Ma. The chemical reagent responsible for the rejuvenation of zircon obviously left the monazite unaffected. Received: 19 February 1998 / Accepted: 19 October 1998     

The effects of variable bulk composition on the melting systematics of fertile peridotitic assemblages

Experiments were conducted at 1 GPa on four starting materials to investigate the effects of variable mineral proportions on the melting systematics of compositionally fertile peridotitic assemblages. Starting materials were constructed by recombining Kilbourne Hole xenolith mineral separates by weight into four mixtures with mineral proportions olivine (Ol): orthopyroxene (Opx): clinopyroxene (Cpx): spinel (Sp) of 0.50:0.07:0.40:0.03 (FER-B), 0.50:0.46:0.01:0.03 (FER-C), 0.50:0.30:0.10:0.10 (FER-D), and 0.50:0.235:0.235: 0.03 (FER-E). Experiments were performed on a 1.27-cm (0.5 in.) piston-cylinder apparatus over the temperature interval 1270–1390 °C, using a variation of the diamond aggregate melt extraction technique employing vitreous carbon spheres in place of diamonds as the melt extraction layer. The solidus temperatures are similar for all the starting materials, with an average value of 1250 °C. In FER-D and -E, the near-solidus melting reaction for a lherzolite assemblage was determined to be of the form Cpx + Opx + Sp → melt + Ol. A subsequent reaction of the form Opx + Sp → melt + Ol was determined for FER-D after the exhaustion of Cpx. Over the entire temperature interval investigated for FER-B and -C, reactions were determined to be of the form Cpx + Sp → melt + Ol and Opx + Sp → melt + Ol, respectively. Melt percent (F) vs temperature (T) curves are concave up for all starting materials, demonstrating that isobaric melt productivity increases with progressive batch melting. At any given melt fraction, (dF/dT)_P increases with increasing amount of Cpx in the starting material, indicating that the modal proportion of Cpx is one of the primary controls on isobaric melt productivity of upwelling peridotite. The concave up melt productivity functions for peridotitic assemblages determined in this study suggest that assuming linear or concave down melt productivity functions for modeling mantle melting may not be appropriate. Received: 2 August 1999 / Accepted: 7 June 2000     

The effect of distribution of iron-oxyhydroxide grain coatings on the transport of bacterial cells in porous media

 Among the demonstrated processes influencing the transport of bacteria through aquifers, the deposition of cells on mineral surfaces is one of the most important. For example, understanding the transport of introduced bacteria through aquifers is essential to designing some in situ bioremediation schemes. The impact of the presence and distribution of Fe(III)-oxyhydroxide-coated sand grains on bacterial transport through porous media was evaluated in column experiments in which bacteria (short rods; 1.2 μm length) were eluted through columns of quartz sand (0.5–0.6 mm in diameter) for several conditions of chemical heterogeneity of mineral substrate. Fe(III)-oxyhydroxide-coated sand was present as 10% of the mass, and it was arranged in three treatments: (1) homogeneously distributed, and present as a discrete layer (2) at the top and (3) at the bottom of 14-cm-long sand columns. A pulse input of 10⁸ cells ml^–1 was introduced in an artificial groundwater solution flowing at 14 cm h^–1 through the column, and eluted cells were counted. Peak breakthrough occurred at 1.0 pore volume. A large proportion of cells were retained; 14.7–15.8% of the cells were recovered after three pore volumes of solution had eluted through clean quartz sand, and only 2.1–4.0% were recovered from the Fe(III)-oxyhydroxide-coated sand mixtures. The three physical arrangements of the chemical heterogeneity resulted in essentially the same breakthrough of cells, indicating that the spatial distribution of iron coating does not affect the transport of bacteria. The results of the column transport experiments, which mimic hydrogeological conditions encountered in field problems, are consistent with our mechanistic understanding of bacterial sorption. Received: 10 April 1996 · Accepted: 17 February 1997     

Toxic metal contamination in the lateral lakes of the Coeur d'Alene River valley, Idaho

 The 11 lateral lakes of Coeur d'Alene River valley in northern Idaho have received heavy metal contamination from over a century of upstream mining. The lateral lakes lie within the flood plain of the Coeur d'Alene River, and in their bottom sediments is preserved a stratigraphic record of the upstream mining operations. To characterize the contaminated sediments in the lateral lakes, sampling techniques, including the Livingston piston corer and the Huttenen freeze box, have been developed by Quaternary geologists to preserve the vertical stratigraphy in the samples. From 26 cm to over 55 cm of undisturbed tailing sediments, commonly with “varve-like” features, have been found in each of the lateral lakes, with maximum concentrations by weight of lead at 3.8%, zinc at 3.4%, arsenic at 340 mg/kg, cadmium at 120 mg/kg and mercury at 7 mg/kg. The contamination in the lakes appears to be restricted to the shallow subsurface and heavy metal concentrations generally drop to background levels within a meter of depth. Received: 22 May 1998 · Accepted: 21 September 1998     

Hydrogeological and hydrochemical framework of regional aquifer system in Kali-Ganga sub-basin, India

 The central Ganga Basin is one of the major groundwater reservoirs in India. The Kali-Ganga sub-basin is a micro watershed of the central Ganga Basin, containing a number of productive aquifers. A detailed hydrogeological investigation was carried out, which reveals the occurrence of a single-tier aquifer system down to 163 m bgl (metres below ground level), but at places it is interleaved with clay layers; thus imparting it a two-to three-tier aquifer system. These aquifers are unconfined to confined in disposition. The transmissivity, storage coefficient and hydraulic conductivity are determined as 2178 m²/day, 1.12×10^–5 and 120 m/day, respectively. The groundwater of the basin is fresh, of an alkali-bicarbonate type and is suitable for irrigation and domestic use. However, in certain areas, extensive agricultural activities, and domestic and industrial effluents have caused some deterioration of groundwater quality. This study contains data of where the concentration of Fe, Pb, Cd, Cr and Ni are higher than the permissible limits, which may be hazardous to public health. Received: 2 March 2000 · Accepted: 3 July 2000     

Environmental impact of mining waste disposal on a tropical lowland river system: a case study on the Ok Tedi Mine, Papua New Guinea

The 1000 km long Ok Tedi/Fly River system receives about 66 Mt/year of mining waste from the Ok Tedi copper-gold porphyry mine. Mine input has increased the suspended sediment load of the Middle Fly River about 5–10 times over the natural background. A significant yet unknown amount of copper-rich material deposits unevenly in the extensive tropical lowland floodplain. Recent alluvial sediments of the Fly River floodplain have copper contents of 620 mg/kg (±1σ: 430–900), whereas the regional background is 40 mg/kg (±σ: 25–60). This pattern is mirrored and enhanced by the gold dispersal pattern with a 7 ppb Au background versus a 140–275 ppb population in mine-derived material. Very high deposition rates (around 4 cm/y) of mine-derived sediment were determined in locations close to the creeks and channels which link the Fly River with the outer floodplain. A thin layer of 1–5 cm of copper-rich material (400–900 mg/kg Cu) was usually found on the bottom of drowned (tributary) valley lakes. Average dissolved copper content in waters of the inner floodplain is around 9 μg/l (±1σ: 5–14) as compared to unpolluted water from the outer floodplain with < 2 μg/l Cu. The present Fly River water, about 600 km downstream of the mine site, has concentrations of 17 ± 3 μg/l dissolved Cu. Received: 30 June 1996 / Accepted: 9 January 1997     

Evaluation of scraping treatments to restore initial infiltration capacity of three artificial recharge projects in central Iran

 A limiting factor in developing artificial recharge of groundwater is clogging of the soil surface and consequent reduction of infiltration rates. In order to evaluate the degree of improving infiltration rates by scraping away various amounts of the upper soil materials, a study was conducted at three artificial recharge sites (Kohrouyeh, Bagh-Sorkh, and Kachak) in Isfahan Province, central Iran. Five treatments (T1–T5) were considered. Infiltration was measured: T1, on deposited sediment layer; T2, after removing the sediments; T3, scraping of sediments and 5 cm of soil; T4, scraping of sediments and 10 cm of soil; and T5, removing sediments and 15 cm of soil. Initial soil-moisture content of the sites ranged from 1.0–2.87% for Kohrouyeh, 1.18–3.47% for Bagh-Sorkh, and 1.89–3.93% for Kachak. The main texture of the soils was sandy loam. Clay particles have penetrated to a depth of more than 40 cm in some of the recharge basins. A significant increase in final infiltration rate of T5 as compared to T1 treatment was observed for all recharge sites. The final infiltration rates of T1 and T5 treatments for Kohrouyeh, Bagh-Sorkh, and Kachak sites were 0.35, 7.9; 1.22, 12.3; and 0.93, 6.2 cm/h, respectively. The differences between infiltration rates of T2, T3, and T4 treatments were not statistically significant. It is concluded that on average, the infiltration capacity of the untreated recharge facilities have reached 20.3% of the original values, and that scraping the top sediment layer and 15 cm of topsoil could restore 68.3% of the initial infiltration capacity. Received, July 1998 / Revised, April 1999, May 1999 / Accepted, June 1999     

Re–Os and <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar ages of the Jiguanshan porphyry Mo deposit,Xilamulun metallogenic belt,NE China,and constraints on mineralization events

The large Jiguanshan porphyry Mo deposit, with more than 100 Mt of ore and grades ranging from 0.08% to 0.11%, is located in the newly identified Xilamulun metallogenic belt along the northern margin of the North China Craton. The Mo mineralization is predominantly disseminated in the host granite porphyry, but locally occurs as stockworks in lithic tuff and rhyolitic rocks. ⁴⁰Ar/³⁹Ar dates of samples from groundmass material in the host granite porphyry, post-ore diabase, and quartz porphyry dikes show plateau ages of 155.1 ± 1.9, 149.4 ± 0.9, and 147.6 ± 0.9 Ma, with inverse isochron ages of 156.0 ± 1.8, 149.3 ± 1.3, and 148.3 ± 1.2 Ma, respectively. Seven samples of disseminated molybdenite yielded a weighted average ¹⁸⁷Re-¹⁸⁷Os age of 155.3 ± 0.9 Ma, whereas six veinlet-type molybdenite samples yielded a weighted average ¹⁸⁷Re-¹⁸⁷Os age of 153.0 ± 0.9 Ma, providing direct timing constraints for the Mo mineralization at 153–155 Ma. The regional geological setting together with the emplacement of post-ore diabase and quartz porphyry dikes in the Jiguanshan deposit, are indicative of an extensional regime in Late Jurassic, which was probably linked to lithospheric extension in northeast China.     

Enrichment of basalt and mixing of dacite in the rootzone of a large rhyolite chamber: inclusions and pumices from the Rattlesnake Tuff, Oregon

 A variety of cognate basalt to basaltic andesite inclusions and dacite pumices occur in the 7-Ma Rattlesnake Tuff of eastern Oregon. The tuff represents ∼280 km³ of high-silica rhyolite magma zoned from highly differentiated rhyolite near the roof to less evolved rhyolite at deeper levels. The mafic inclusions provide a window into the processes acting beneath a large silicic chamber. Quenched basaltic andesite inclusions are substantially enriched in incompatible trace elements compared to regional primitive high-alumina olivine tholeiite (HAOT) lavas, but continuous chemical and mineralogical trends indicate a genetic relationship between them. Basaltic andesite evolved from primitive basalt mainly through protracted crystal fractionation and multiple cycles (≥10) of mafic recharge, which enriched incompatible elements while maintaining a mafic bulk composition. The crystal fractionation history is partially preserved in the mineralogy of crystal-rich inclusions (olivine, plagioclase ± clinopyroxene) and the recharge history is supported by the presence of mafic inclusions containing olivines of Fo₈₀. Small amounts of assimilation (∼2%) of high-silica rhyolite magma improves the calculated fit between observed and modeled enrichments in basaltic andesite and reduces the number of fractionation and recharge cycles needed. The composition of dacite pumices is consistent with mixing of equal proportions of basaltic andesite and least-evolved, high-silica rhyolite. In support of the mixing model, most dacite pumices have a bimodal mineral assemblage with crystals of rhyolitic and basaltic parentage. Equilibrium dacite phenocrysts are rare. Dacites are mainly the product of mingling of basaltic andesite and rhyolite before or during eruption and to a lesser extent of equilibration between the two. The Rattlesnake magma column illustrates the feedback between mafic and silicic magmas that drives differentiation in both. Low-density rhyolite traps basalts and induces extensive fractionation and recharge that causes incompatible element enrichment relative to the primitive input. The basaltic root zone, in turn, thermally maintains the rhyolitic magma chamber and promotes compositional zonation. Received: 1 June 1998 / Accepted: 5 February 1999     

Geochemical factors controlling accumulation of major and trace elements in Greenland coastal and fjord sediments

 The major (Al, Ti, Ca, Mg, Fe, Mn, Si) and trace element (Cd, Cr, Cu, Hg, Li, Ni, Pb, V, Zn) concentrations in surficial (<20 cm) sediments from fjords and open coastal waters around Greenland have been determined. Regionally, high concentrations of Fe, Ti, Mg, Cr, Cu, Ni, and V occur in some west and east coast sediments, but they appear to be natural in origin, as there is no indication of anthropogenic influence. Chemical partition indicates that most of the heavy metals are structurally bound in various silicate, oxide, and sulfide minerals. These host minerals occur more or less equally in the coarse and fine sediment fractions (material >63 μm and <63 μm) and have accumulated at the same rate as other detrital clastic material. Provenance and glaciomarine deposition are the main factors controlling the abundance and distribution of the major and trace elements. The chemical composition reflects the mineralogical differences in the provenance of glacial marine material deposited by water and ice adjacent to Greenland. The main source of the sediments enriched in Ti, Fe, Mg, Cr, Cu, Ni, and V appears to be material derived from the volcanic rocks of the Mesozoic-Tertiary Provinces of Greenland by glacial erosion. Received: 26 June 1995 · Accepted: 11 August 1995     

Metal retention in a thin karstic soil, Christian County, Missouri

 The response of a Wilderness cherty loam series soil to repeated dosages of metals (as sewage sludge) using a two-step sequential extraction procedure was investigated. Variations in metal content between amended and control soils were related to organic matter, clay content, and clay mineralogy. Of the four metals investigated, Cu was found to accumulate in the top 20 cm of amended soils; Pb and Zn were present in even smaller amounts with respect to the control soils, and Cr concentrations were unaffected with respect to both depth and amendment. None of the metals indicated accumulation in deeper (>20 cm) parts of the soil profile. Overall, results suggest that the metals remobilize in the top 20 cm, being readily uptaken by the fescue grass growing in this lot. Precipitation of insoluble forms of metal into deeper parts of the soil profile was proven unlikely based on the distribution of metal concentrations throughout the profile. Received: 15 December 1997 · Accepted: 23 March 1998