Magnetic structure of polluted soil profiles from Eastern Ukraine

Our study concerned magnetic properties of soil profiles taken from polluted regions of Eastern Ukraine around the industrial centres Krivyj Rig, Mariupol and Komsomolsk. Soils represent chernozem and podzoluvisol. The low-field magnetic susceptibility shows enhancement in the topsoil caused by contamination by coarse-grain magnetite connected with industrial pollution. Magnetic mineralogy was determined by means of thermal demagnetisation of SIRM, monitoring of susceptibility changes during warming from ?196°C to room temperature and heating to 700°C, and Mössbauer analysis. Granulometry of magnetic particles was investigated by determination of hysteresis parameters, susceptibility, M _s , SIRM and ARM ratios and frequency dependence of susceptibility. The chemical parameters, namely pH, organic carbon and iron content in different pedogenic and lithogenic minerals, measured for particular horizons determined pedogenic characteristic of soil profiles. Our study showed that differences in magnetic parameters of non-polluted and polluted soil profiles are not limited to the topsoil, but reach deep layers of the parent material. Industrial pollution promotes formation of the so-called “pedogenic” SP and SD particles in these layers.     

Attenuation coefficients of Rayleigh and <Emphasis Type="Italic">Lg</Emphasis> waves

Analysis of the frequency dependence of the attenuation coefficient leads to significant changes in interpretation of seismic attenuation data. Here, several published surface-wave attenuation studies are revisited from a uniform viewpoint of the temporal attenuation coefficient, denoted by χ. Theoretically, χ( f) is expected to be linear in frequency, with a generally non-zero intercept γ?=?χ(0) related to the variations of geometrical spreading, and slope dχ/df = π/Q _e caused by the effective attenuation of the medium. This phenomenological model allows a simple classification of χ( f) dependences as combinations of linear segments within several frequency bands. Such linear patterns are indeed observed for Rayleigh waves at 500–100-s and 100–10-s periods, and also for Lg from ~2 s to ~1.5 Hz. The Lg χ( f) branch overlaps with similar linear branches of body, Pn, and coda waves, which were described earlier and extend to ~100 Hz. For surface waves shorter than ~100 s, γ values recorded in areas of stable and active tectonics are separated by the levels of \(\gamma _{D} \approx 0.2 \times 10^{-3}\) s^???1 (for Rayleigh waves) and 8 ×10^???3 s^???1 (for Lg). The recently recognized discrepancy between the values of Q measured from long-period surface waves and normal-mode oscillations could also be explained by a slight positive bias in the geometrical spreading of surface waves. Similarly to the apparent χ, the corresponding linear variation with frequency is inferred for the intrinsic attenuation coefficient, χ _i , which combines the effects of geometrical spreading and dissipation within the medium. Frequency-dependent rheological or scattering Q is not required for explaining any of the attenuation observations considered in this study. The often-interpreted increase of Q with frequency may be apparent and caused by using the Q-based model of attenuation and following preferred Q( f) dependences while ignoring the true χ( f) trends within the individual frequency bands.     

A study of Guptkashi,Uttarakhand earthquake of 6 February 2017 (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>5.3) in the Himalayan arc and implications for ground motion estimation

The 2017 Guptkashi earthquake occurred in a segment of the Himalayan arc with high potential for a strong earthquake in the near future. In this context, a careful analysis of the earthquake is important as it may shed light on source and ground motion characteristics during future earthquakes. Using the earthquake recording on a single broadband strong-motion seismograph installed at the epicenter, we estimate the earthquake’s location (30.546° N, 79.063° E), depth (H?=?19 km), the seismic moment (M₀?=?1.12×10¹⁷ Nm, M _w 5.3), the focal mechanism (φ?=?280°, δ?=?14°, λ?=?84°), the source radius (a?=?1.3 km), and the static stress drop (Δσ _s ~22 MPa). The event occurred just above the Main Himalayan Thrust. S-wave spectra of the earthquake at hard sites in the arc are well approximated (assuming ω^?2 source model) by attenuation parameters Q(f)?=?500f^0.9, κ?=?0.04 s, and f_max?=?infinite, and a stress drop of Δσ?=?70 MPa. Observed and computed peak ground motions, using stochastic method along with parameters inferred from spectral analysis, agree well with each other. These attenuation parameters are also reasonable for the observed spectra and/or peak ground motion parameters in the arc at distances ≤?200 km during five other earthquakes in the region (4.6?≤?M _w ?≤?6.9). The estimated stress drop of the six events ranges from 20 to 120 MPa. Our analysis suggests that attenuation parameters given above may be used for ground motion estimation at hard sites in the Himalayan arc via the stochastic method.     

Frictional and viscous effects on the nucleation phase of an earthquake

We study the frictional and viscous effects on earthquake nucleation, especially for the nucleation phase, based on a one-degree-of-freedom spring-slider model with friction and viscosity. The frictional and viscous effects are specified by the characteristic displacement, U _c, and viscosity coefficient, η, respectively. Simulation results show that friction and viscosity can both lengthen the natural period of the system and viscosity increases the duration time of motion of the slider. Higher viscosity causes a smaller amplitude of lower velocity motion than lower viscosity. A change of either U _c (under large η) or η (under large U _c) from a large value (U _ch for U _c and η _h for η) to a small one (U _cl for U _c and η _l for η) in two stages during sliding can result in a clear nucleation phase prior to the P-wave. The differences δU _c = U _ch ? U _cl and δη = η _h ? η _l are two important factors in producing a nucleation phase. The difference between the nucleation phase and the P-wave increases with either δU _c or δη. Like seismic observations, the peak amplitude of P-wave, which is associated with the earthquake magnitude, is independent upon the duration time of nucleation phase. A mechanism specified with a change of either η or U _c from a larger value to a smaller one due to temporal variations in pore fluid pressure and temperature in the fault zone based on radiation efficiency is proposed to explain the simulation results and observations.     

Body wave attenuation characteristics in the crust of Alborz region and North Central Iran

Attenuation of P and S waves has been investigated in Alborz and north central part of Iran using the data recorded by two permanent and one temporary networks during October 20, 2009, to December 22, 2010. The dataset consists of 14,000 waveforms from 380 local earthquakes (2 < M _L < 5.6). The extended coda normalization method (CNM) was used to estimate quality factor of P (Q _P) and S waves (Q _S) at seven frequency bands (0.375, 0.75, 1.5, 3, 6, 12, 24 Hz). The Q _P and Q _S values have been estimated at lapse times from 40 to 100 s. It has been observed that the estimated values of Q _P and Q _S are time independent; therefore, the mean values of Q _P and Q _S at different lapse times have been considered. The frequency dependence of quality factor was determined by using a power-law relationship. The frequency-dependent relationship for Q _P was estimated in the form of (62 ± 7)f ^{(1.03 ± 0.07)} and (48 ± 5)f ^{(0.95 ± 0.07)} in Alborz region and North Central Iran, respectively. These relations for Q _S for Alborz region and North Central Iran have estimated as (83 ± 8)f ^{(0.99 ± 0.07)} and (68 ± 5)f ^{(0.96 ± 0.05)}, respectively. The observed low Q values could be the results of thermoelastic effects and/or existing fracture. The estimated frequency-dependent relationships are comparable with tectonically active regions.     

Influence of aquatic plants on the hydrogen isotope composition of sedimentary long-chain n-alkanes in the Lake Qinghai region,Qinghai-Tibet Plateau

The hydrogen isotopic composition(δD) of leaf wax long-chain n-alkanes(C27, C29, and C31) from lacustrine sediments has been widely applied to reconstruct terrestrial paleoclimatic and paleohydrological changes. However, few studies have addressed whether the aquatic-derived n-alkanes can affect the δD values of lake sedimentary long-chain n-alkanes, which are usually regarded as a recorder of the terrestrial hydrological signals. Here we systematically investigated δD values of long-chain n-alkanes from modern aquatic plants, both near-shore and off-shore surface sediments, surrounding terrestrial plant litters, as well as river water and lake water in Lake Qinghai and its satellite lakes on the northeastern Qinghai-Tibet Plateau. Our data showed that(i) δD values of long-chain n-alkanes from aquatic plants varied from-184‰ to-132‰ for n-C27, from-183‰ to-138‰ for n-C29, and from-189‰ to-130‰ for n-C31, respectively, with no significant differences among the three n-alkanes homologues;(ii) δD values of long-chain n-alkanes from aquatic plants were generally more positive than those from surrounding terrestrial plants, possibly because that they recorded the D-enrichment of lake water in this semi-arid region;(iii) δD values of long-chain n-alkanes from surface sediments showed significant differences among the three n-alkanes homologues, due to the larger aquatic input of n-C27 to the sedimentary lipid pool than that of n-C31, and(iv) n-C27 δD values of near-shore aquatic plants and near-shore sediments are more negative than those from off-shore as a result of lower δD values of near-shore lake water. Our findings indicate that in this region(i) the offset between sedimentary n-C27 and n-C31 δD values(ΔδDC27-C31) could potentially be used to evaluate if sedimentary long-chain n-alkanes are derived from a single source;(ii) while δD values of n-C27 may be influenced by lake water hydrological changes, sedimentary n-C31 is derived predominantly from terrestrial plants and thus its δD can serve as a relatively reliable indicator for terrestrial paleoclimatic and paleohydrological reconstructions.     

Energy input and dissipation in a temperate lake during the spring transition

ADCP and temperature chain measurements have been used to estimate the rate of energy input by wind stress to the water surface in the south basin of Windermere. The energy input from the atmosphere was found to increase markedly as the lake stratified in spring. The efficiency of energy transfer (Eff), defined as the ratio of the rate of working in near-surface waters (RW) to that above the lake surface (P ₁₀), increased from ～0.0013 in vertically homogenous conditions to ～0.0064 in the first 40 days of the stratified regime. A maximum value of Eff～0.01 was observed when, with increasing stratification, the first mode internal seiche period decreased to match the diurnal wind period of 24 h. The increase in energy input, following the onset of stratification was reflected in enhancement of the mean depth-varying kinetic energy without a corresponding increase in wind forcing. Parallel estimates of energy dissipation in the bottom boundary layer, based on determination of the structure function show that it accounts for ～15% of RW in stratified conditions. The evolution of stratification in the lake conforms to a heating stirring model which indicates that mixing accounts for ～21% of RW. Taken together, these estimates of key energetic parameters point the way to the development of full energy budgets for lakes and shallow seas.     

Near-source attenuation of high-frequency body waves beneath the New Madrid Seismic Zone

Attenuation characteristics in the New Madrid Seismic Zone (NMSZ) are estimated from 157 local seismograph recordings out of 46 earthquakes of 2.6?≤?M?≤?4.1 with hypocentral distances up to 60 km and focal depths down to 25 km. Digital waveform seismograms were obtained from local earthquakes in the NMSZ recorded by the Center for Earthquake Research and Information (CERI) at the University of Memphis. Using the coda normalization method, we tried to determine Q values and geometrical spreading exponents at 13 center frequencies. The scatter of the data and trade-off between the geometrical spreading and the quality factor did not allow us to simultaneously derive both these parameters from inversion. Assuming 1/R ^1.0 as the geometrical spreading function in the NMSZ, the Q _P and Q _S estimates increase with increasing frequency from 354 and 426 at 4 Hz to 729 and 1091 at 24 Hz, respectively. Fitting a power law equation to the Q estimates, we found the attenuation models for the P waves and S waves in the frequency range of 4 to 24 Hz as Q _P?=?(115.80?±?1.36) f ^{(0.495?±?0.129)} and Q _S?=?(161.34?±?1.73) f ^{(0.613?±?0.067)}, respectively. We did not consider Q estimates from the coda normalization method for frequencies less than 4 Hz in the regression analysis since the decay of coda amplitude was not observed at most bandpass filtered seismograms for these frequencies. Q _S/Q _P?>?1, for 4?≤?f?≤?24 Hz as well as strong intrinsic attenuation, suggest that the crust beneath the NMSZ is partially fluid-saturated. Further, high scattering attenuation indicates the presence of a high level of small-scale heterogeneities inside the crust in this region.     

A new <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> estimation parameter for use in earthquake early warning systems

We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ _c and P _d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M _s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M _s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 ^Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.     

Probabilistic aftershock hazard analysis,two case studies in West and Northwest Iran

Aftershock hazard maps contain the essential information for search and rescue process, and re-occupation after a main-shock. Accordingly, the main purposes of this article are to study the aftershock decay parameters and to estimate the expected high-frequency ground motions (i.e., Peak Ground Acceleration (PGA)) for recent large earthquakes in the Iranian plateau. For this aim, the Ahar-Varzaghan doublet earthquake (August 11, 2012; M _N =6.5, M _N =6.3), and the Ilam (Murmuri) earthquake (August 18, 2014 ; M _N =6.2) have been selected. The earthquake catalogue has been collected based on the Gardner and Knopoff (Bull Seismol Soc Am 64(5), 1363-1367, 1974) temporal and spatial windowing technique. The magnitude of completeness and the seismicity parameters (a,??b) and the modified Omori law parameters (P,??K,??C) have been determined for these two earthquakes in the 14, 30, and 60 days after the mainshocks. Also, the temporal changes of parameters (a,??b,??P,??K,??C) have been studied. The aftershock hazard maps for the probability of exceedance (33%) have been computed in the time periods of 14, 30, and 60 days after the Ahar-Varzaghan and Ilam (Murmuri) earthquakes. For calculating the expected PGA of aftershocks, the regional and global ground motion prediction equations have been utilized. Amplification factor based on the site classes has also been implied in the calculation of PGA. These aftershock hazard maps show an agreement between the PGAs of large aftershocks and the forecasted PGAs. Also, the significant role of b parameter in the Ilam (Murmuri) probabilistic aftershock hazard maps has been investigated.     

Temporal and spatial distributions of precursory seismicity rate changes in the Thailand-Laos-Myanmar border region: implication for upcoming hazardous earthquakes

To study the prospective areas of upcoming strong-to-major earthquakes, i.e., M _w  ≥ 6.0, a catalog of seismicity in the vicinity of the Thailand-Laos-Myanmar border region was generated and then investigated statistically. Based on the successful investigations of previous works, the seismicity rate change (Z value) technique was applied in this study. According to the completeness earthquake dataset, eight available case studies of strong-to-major earthquakes were investigated retrospectively. After iterative tests of the characteristic parameters concerning the number of earthquakes (N) and time window (T _w ), the values of 50 and 1.2 years, respectively, were found to reveal an anomalous high Z-value peak (seismic quiescence) prior to the occurrence of six out of the eight major earthquake events studied. In addition, the location of the Z-value anomalies conformed fairly well to the epicenters of those earthquakes. Based on the investigation of correlation coefficient and the stochastic test of the Z values, the parameters used here (N = 50 events and T _w  = 1.2 years) were suitable to determine the precursory Z value and not random phenomena. The Z values of this study and the frequency-magnitude distribution b values of a previous work both highlighted the same prospective areas that might generate an upcoming major earthquake: (i) some areas in the northern part of Laos and (ii) the eastern part of Myanmar.     

Scaling relations of moment magnitude,local magnitude,and duration magnitude for earthquakes originated in northeast India

In this study, we aim to improve the scaling between the moment magnitude (M _W), local magnitude (M _L), and the duration magnitude (M _D) for 162 earthquakes in Shillong-Mikir plateau and its adjoining region of northeast India by extending the M _W estimates to lower magnitude earthquakes using spectral analysis of P-waves from vertical component seismograms. The M _W-M _L and M _W-M _D relationships are determined by linear regression analysis. It is found that, M _W values can be considered consistent with M _L and M _D, within 0.1 and 0.2 magnitude units respectively, in 90 % of the cases. The scaling relationships investigated comply well with similar relationships in other regions in the world and in other seismogenic areas in the northeast India region.     

Detection of Antarctic oscillation signals in Earth’s oblateness variations

Variations of Earth’s oblateness (J ₂) reflect a large scale mass redistribution within the Earth system. The climate effect causing J ₂ interannual variations is still not clear, though previous studies indicated it may be related to EI Niño–Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO). However, we have a new discovery of the significant Antarctic oscillation (AAO) signals in J ₂ interannual variations, especially on 4–6 year scales based on cross wavelet and wavelet coherence analysis with 95% confidence test during 1979–2012. The results additionally indicate that the close phase relationship between J ₂ and AAO (AAO leading J ₂ variations by 3 ± 2 months in phase) is far superior to that between J ₂ and ENSO/PDO on 4–6 year scales. In this work, we discuss, for the first time, a possible geophysical mechanism of AAO effecting J ₂ variations. The investigations are based on the definition of AAO and its spatial–temporal behavior influencing the large-scale mass movement. Finally, an approximate quantitative estimate of the AAO imprint on J ₂ with an emphasis on the atmospheric contribution is made.     

Three-dimensional admittance analysis of lithospheric elastic thickness over the Louisville Ridge

Using bathymetry and altimetric gravity anomalies, a 1° 9 1° lithospheric effective elastic thickness(Te) model over the Louisville Ridge and its adjacent regions is calculated using the moving window admittance technique. For comparison, three bathymetry models are used: general bathymetric charts of the oceans, SIO V15.1,and BAT_VGG. The results show that BAT_VGG is more suitable for calculating T e than the other two models. T e along the Louisville Ridge was re-evaluated. The southeast of the ridge has a medium Te of 10–20 km, while Te increases dramatically seaward of the Tonga-Kermadec trench as a result of the collision of the Pacific and IndoAustralian plates.     

<Emphasis Type="Italic">Q</Emphasis><Subscript>c</Subscript> and <Emphasis Type="Italic">Q</Emphasis><Subscript>S</Subscript> wave attenuation of South African earthquakes

Quality factor Q, which describes the attenuation of seismic waves with distance, was determined for South Africa using data recorded by the South African National Seismograph Network. Because of an objective paucity of seismicity in South Africa and modernisation of the seismograph network only in 2007, I carried out a coda wave decay analysis on only 13 tectonic earthquakes and 7 mine-related events for the magnitude range 3.6?≤?M _L ?≤?4.4. Up to five seismograph stations were utilised to determine Q _c for frequencies at 2, 4, 8 and 16 Hz resulting in 84 individual measurements. The constants Q ₀ and α were determined for the attenuation relation Q _c(f)?=?Q ₀ f ^α . The result was Q ₀?=?396?±?29 and α?=?0.72?±?0.04 for a lapse time of 1.9*(t _s???t ₀) (time from origin time t ₀ to the start of coda analysis window is 1.9 times the S-travel time, t _s) and a coda window length of 80 s. This lapse time and coda window length were found to fit the most individual frequencies for a signal-to-noise ratio of at least 3 and a minimum absolute correlation coefficient for the envelope of 0.5. For a positive correlation coefficient, the envelope amplitude increases with time and Q _c was not calculated. The derived Q _c was verified using the spectral ratio method on a smaller data set consisting of nine earthquakes and one mine-related event recorded by up to four seismograph stations. Since the spectral ratio method requires absolute amplitudes in its calculations, site response tests were performed to select four appropriate stations without soil amplification and/or signal distortion. The result obtained for Q _S was Q ₀?=?391?±?130 and α?=?0.60?±?0.16, which agrees well with the coda Q _c result.     

Spatiotemporal variations of actual evapotranspiration over the Lake Selin Co and surrounding small lakes (Tibetan Plateau) during 2003–2012

Actual evapotranspiration(ET_a) over the Tibetan Plateau(TP) is an important component of the water cycle,and greatly influences the water budgets of the TP lake basins.Quantitative estimation of ET_a within lake basins is fundamental to physically understanding ET_a changes,and thus will improve the understanding of the hydro logical processes and energy balance throughout the lake basins.In this study,the spatiotemporal dynamic changes of ET_α within the Lake Selin Co(the TP's largest lake) and its surrounding small lakes and land area during 2003-2012 are examined at the basin scale.This was carried out using the well-established Water and Energy Budget-based Distributed Hydrological Model(WEB-DHM) for the land area,the Penman method for the water area when unfrozen,and a simple sublimation estimation approach for the water area when frozen.The relationships between ET_a changes and controlling factors are also discussed.Results indicate that the simulated land ET_a from the WEB-DHM reasonably agrees with the estimated ET_a values from the nonlinear complementary relationship model using appropriately calibrated parameter values at a point scale.Land ET_a displayed a non-significant increase of 7.03 mm year~(-1),and largely depends on precipitation.For the water area,the combined effects of reduced wind speed and net radiation offset the effect of rising temperature and vapor pressure deficit,and contributed to a non-significant decrease in evaporation of 4.17 mm year~(-1).Sensitivity analysis shows that vapor pressure deficit and wind speed are the most sensitive variables to the changes of evaporation from the water area.     

Magnetic properties and heavy metal pollution of soils in the vicinity of a cement plant,Xuzhou (China)

This study characterized the magnetic property and levels of heavy metals of the topsoils near a cement plant. The concentrations of five selected heavy metals (Pb, Cu, Zn and Cd) were measured on 32 topsoil samples (0–20 cm) collected near a cement plant via inductively coupled plasma/mass spectroscopy (ICP-MS). The orders of enrichment factors (EF), on average, were Cd (7.3) > Cu (3) > Zn (2.9) > Pb (2.1), respectively. A self-organizing map (SOM) was applied to the concentrations of heavy metals for “correlation hunting”. Mineral magnetic concentration parameters, such as the specific magnetic susceptibility (χ), susceptibility of anhysteretic remanent magnetization (χ_ARM), saturation isothermal remanent magnetization (SIRM), together with interparametric ratios (such as IRM_− 100mT/SIRM, SIRM/χ, χ_ARM/SIRM) show that ferrimagnetic, superparamagnetic (SP) and multi-domain (MD) minerals dominated the soils. The results of correlation analysis indicate that copper showed a significant correlation with χ, χ_ARM and SIRM but such a relationship with χ, χ_ARM and SIRM was only weakly identified for Zn, Cd and Pb.     

Earthquake hazard and risk assessment based on Unified Scaling Law for Earthquakes: Greater Caucasus and Crimea

We continue applying the general concept of seismic risk analysis in a number of seismic regions worldwide by constructing regional seismic hazard maps based on morphostructural analysis, pattern recognition, and the Unified Scaling Law for Earthquakes (USLE), which generalizes the Gutenberg-Richter relationship making use of naturally fractal distribution of earthquake sources of different size in a seismic region. The USLE stands for an empirical relationship log₁₀N(M, L)?=?A?+?B·(5 – M)?+?C·log₁₀L, where N(M, L) is the expected annual number of earthquakes of a certain magnitude M within a seismically prone area of linear dimension L. We use parameters A, B, and C of USLE to estimate, first, the expected maximum magnitude in a time interval at seismically prone nodes of the morphostructural scheme of the region under study, then map the corresponding expected ground shaking parameters (e.g., peak ground acceleration, PGA, or macro-seismic intensity). After a rigorous verification against the available seismic evidences in the past (usually, the observed instrumental PGA or the historically reported macro-seismic intensity), such a seismic hazard map is used to generate maps of specific earthquake risks for population, cities, and infrastructures (e.g., those based on census of population, buildings inventory). The methodology of seismic hazard and risk assessment is illustrated by application to the territory of Greater Caucasus and Crimea.     

Paleomagnetic results from Late Carboniferous to Early Permian rocks in the northern Qiangtang terrane,Tibet, China,and their tectonic implications

Results of a systematic paleomagnetic study are reported based on Late Carboniferous to Early Permian sedimentary rocks on the north slope of the Tanggula Mountains,in the northern Qiangtang terrane(NQT),Tibet,China.Data revealed that magnetic minerals in limestone samples from the Zarigen Formation(CP^z)are primarily composed of magnetite,while those in sandstone samples from the Nuoribagaribao Formation(Pnr)are dominated by hematite alone,or hematite and magnetite in combination.Progressive thermal,or alternating field,demagnetization allowed us to isolate a stable high temperature component(HTC)in 127 specimens from 16 sites which successfully passed the conglomerate test,consistent with primary remnance.The tilt-corrected mean direction for Late Carboniferous to Early Permian rocks in the northern Qiangtang terrane is D_s=30.2°,I_s=-40.9°,k_s=269.0,a_(95)=2.3°,N=16,which yields a corresponding paleomagnetic pole at 25.7°N,241.5°E(dp/dm=2.8°/1.7°),and a paleolatitude of 23.4°S.Our results,together with previously reported paleomagnetic data,indicate that:(1)the NQT in Tibet,China,was located at a low latitude in the southern hemisphere,and may have belonged to the northern margin of Gondwana during the Late Carboniferous to Early Permian;(2)the Paleo-Tethys Ocean was large during the Late Carboniferous to Early Permian,and(3)the NQT subsequently moved rapidly northwards,perhaps related to the fact that the Paleo-Tethys Ocean was rapidly contracting from the Late Permian to Late Triassic while the Bangong Lake-Nujiang Ocean,the northern branch of the Neo-Tethys Ocean,expanded rapidly during this time.     

Region-specific <Emphasis Type="Italic">S</Emphasis>-wave attenuation for earthquakes in northwestern Iran

In this study, continuous wavelet transform is applied to estimate the frequency-dependent quality factor of shear waves, Q _S , in northwestern Iran. The dataset used in this study includes velocigrams of more than 50 events with magnitudes between 4.0 and 6.5, which have occurred in the study area. The CWT-based method shows a high-resolution technique for the estimation of S-wave frequency-dependent attenuation. The quality factor values are determined in the form of a power law as Q _S (f)?=?(147?±?16)f ^0.71?±?0.02 and (126?±?12)f ^0.73?±?0.02 for vertical and horizontal components, respectively, where f is between 0.9 and 12 Hz. Furthermore, in order to verify the reliability of the suggested Q _S estimator method, an additional test is performed by using accelerograms of Ahar-Varzaghan dual earthquakes on August 11, 2012, of moment magnitudes 6.4 and 6.3 and their aftershocks. Results indicate that the estimated Q _S values from CWT-based method are not very sensitive to the numbers and types of waveforms used (velocity or acceleration).