共查询到20条相似文献,搜索用时 31 毫秒
1.
RS和GIS技术集成及其应用 总被引:13,自引:3,他引:10
何庆成 《水文地质工程地质》2000,27(2):44-46
本文简要地介绍了RS(遥感图像处理系统)和GIS(地理信息系统)技术及其集成的基本概念和方法。讨论了RS和GIS技术及其集成的内在涵义、相互关系,认为RS是GIS重要的外部信息源,是其数据更新的重要手段,尤其对于全球性的 地理动力学分析,更必须有RS所提供的覆盖全球的动态数据与GIS的结合。反之,GIS则可以提供RS所需要的一些辅助数据,以提高RS图像的信息量和分辨率,同时,GIS可以将实地调查所 相似文献
2.
在分析和总结前人对红藻石和蓝藻石研究成果基础上,结合岩石薄片显微镜下观察实例,发现在以往碳酸盐岩颗粒分类中没有红藻石和蓝藻石的合适位置。鉴于红藻石重要的成因意义和造礁作用,有必要明确红藻石的概念和归属。珊瑚藻本身极易钙化,经生物矿化作用最终保存下来的珊瑚藻屑一直放在生物碎屑中,而红藻石是由非固着的珊瑚藻构成的钙质独立结核,因此也可以被划分到生物碎屑中。蓝藻石作为蓝细菌钙化作用的产物,同时鉴于蓝藻石的广泛存在,把钙化蓝细菌形成的核形石命名为蓝藻石,这一重要概念从提出到现在一直被使用。然而蓝绿藻概念已变更为蓝细菌,蓝藻石的形成与藻类无关,显然将其称作蓝菌石更加确切。因此,应将红藻石和蓝藻石分别归为生物碎屑和核形石当中,并用新的术语蓝菌石替代蓝藻石。其意义在于使红藻石和蓝藻石的概念及归属更为规范,并为碳酸盐岩颗粒的深入研究提供有益线索。 相似文献
3.
单颗粒矿物微量元素激光原位定量分析测试数据的大量积累和研究,使矿物成为矿床地球化学研究和矿床勘查的重要示踪剂。本文重点选择磁铁矿、磷灰石、石榴子石、榍石、锆石、绿泥石和绿帘石等的原位分析研究所获得的认识,介绍单颗粒矿物成分组合及变化在矿床类型划分、成矿年龄测定、氧逸度、成矿过程与物质来源、找矿与勘探等方面的应用。不同矿床类型中普遍存在的矿物,如磁铁矿、磷灰石等的微量元素含量及组合差异,提供了矿床类型识别的标志。单颗粒矿物,特别是矿石矿物和密切共生矿物如锡石、铌钽铁矿、赤铁矿、石榴子石、方解石等的原位定年,使成矿年龄的直接准确测定成为现实。矿物中变价元素,如Fe、V、Mn、Ce、Eu含量和/或比值的变化,指示了成矿过程氧逸度及其变化特点。从矿物核部向震荡环带与边部的微量元素含量或同位素组成的变化,示踪了成矿过程中流体来源或性质的变化。斑岩和矽卡岩矿床中与成矿作用关系密切的蚀变矿物,如绿泥石、绿帘石的形成温度、特征微量元素比值,如Ti/Sr、Ti/Co、V/Ni、Mg/Sr等,与距矿床中心距离呈线性函数关系,可定量预测距矿床中心的距离,使以绿泥石、绿帘石为代表的找矿指示矿物研究迅速发展。 相似文献
4.
为解决5000 m地质岩芯钻探基础准则与依据缺失问题,提高钻探装备的自动化、智能化水平,启动了5000 m智能地质钻探技术装备研发工作,通过钻机装备、钻探器具研制,钻探工艺技术研究并经试验示范验证,取得多项创新成果,形成了5000 m地质岩芯钻探技术体系。通过特深孔钻孔口径与管柱规格优化研究、钻杆规格设计、装备性能参数选配,形成了5000 m地质岩芯钻探技术规范体系;基于5000 m特深孔地质岩芯钻机、孔口自动化作业装置等关键设备研制,实现了绳索取芯钻进的孔口作业全流程自动化,形成了轻量化钻机孔口管柱柔顺控制技术;基于复杂地层孔内工况判别、钻进参数优化与轨迹优化控制等技术问题研究,形成了多源信息融合的地面与孔底一体化钻进过程智能控制技术;基于高性能薄壁绳索取芯钻杆和系列小口径高效钻具研制,形成了大深度绳索取芯系列钻杆钻具技术;研发了耐高温环保型冲洗液、生物破胶废浆处理技术、“广谱型”双浆堵漏技术,形成了绿色环保型冲洗液体系与护壁堵漏技术。 相似文献
5.
为解决5000 m地质岩芯钻探基础准则与依据缺失问题,提高钻探装备的自动化、智能化水平,启动了5000 m智能地质钻探技术装备研发工作,通过钻机装备、钻探器具研制,钻探工艺技术研究并经试验示范验证,取得多项创新成果,形成了5000 m地质岩芯钻探技术体系。通过特深孔钻孔口径与管柱规格优化研究、钻杆规格设计、装备性能参数选配,形成了5000 m地质岩芯钻探技术规范体系;基于5000 m特深孔地质岩芯钻机、孔口自动化作业装置等关键设备研制,实现了绳索取芯钻进的孔口作业全流程自动化,形成了轻量化钻机孔口管柱柔顺控制技术;基于复杂地层孔内工况判别、钻进参数优化与轨迹优化控制等技术问题研究,形成了多源信息融合的地面与孔底一体化钻进过程智能控制技术;基于高性能薄壁绳索取芯钻杆和系列小口径高效钻具研制,形成了大深度绳索取芯系列钻杆钻具技术;研发了耐高温环保型冲洗液、生物破胶废浆处理技术、“广谱型”双浆堵漏技术,形成了绿色环保型冲洗液体系与护壁堵漏技术。 相似文献
6.
研究桩与岩石的侧摩阻力组成及影响因素,有助于准确地把握桩与岩石的侧摩阻力取值原则。在对桩与岩层的摩擦黏着机制分析的基础上,指出界面力与岩层抗剪力的区别,并提出岩层的极限侧摩阻力由界面强度及岩石强度两者较弱一方决定的观点。进行了中风化岩中4组混凝土短桩的抗压及抗拔极限摩阻力对比试验,获得了相应的极限侧摩阻力值以及抗拔与抗压极限侧摩阻力值的比值。抗拔时由于上部岩层对桩侧岩层的约束作用较弱,会使侧摩阻力相对抗压时有较大降低。通过有限元计算及其与试验值的比较分析,研究短桩与岩层的界面强度条件,发现岩层和混凝土灌注桩间的侧摩阻力中界面黏着力占很大比例。 相似文献
7.
再论流体势及其与圈闭和油气藏关系 总被引:1,自引:0,他引:1
在Hubbert(1953)关于流体势和圈闭的经典论文基础上,从流体势计算的基本原理出发,论证了气势与水势、油势计算表达式的具体形式是不同的,如等地温梯度的静水压力场中理想气体的势包含压力的对数函数与线性函数之和,而不只是包含压力的线性函数.表述了同一求势面所对应的测势面对于不同流体是不同的;指出了圈闭的溢出点通常是等势面与非渗透层面交线的切点;应用简洁的数学分析方法,推导了地下水三维流动情形下油(气)等势面某点切平面坡度与水头、渗滤速度关系的表达式,其中坡度绝对值与渗滤速度关系的表达式为:tanθ=√v2x v2y/|vf vz|,其中vf=K[ρw-p(p)]g/μ,式中:θ为切平面的倾角;vx、vy和vz分别为沿坐标轴ox、oy和oz方向的渗滤速度分量;K和μ分别为渗透率和水的动力黏度;ρw、ρ(p)分别为水和油(气)的密度.根据这些基础性的分析,对被广泛引用的Levorsen(1954)的背斜-水动力复合油藏中水头与油水界面产状的关系示意图进行了两点修改:将油水界面改为曲面、将油水界面处油藏的测势面改为高于油水界面处水的测势面的水平面;对向斜部位聚集油气的水动力条件进行了讨论,认为只有两(各)翼水流都向下流动且水流强度中等条件下才能在向斜部位聚集油气. 相似文献
8.
Cumulate and Cumulative Granites and Associated Rocks 总被引:1,自引:0,他引:1
Abstract. Processes that move crystals relative to melt, that is crystal fractionation, are of major importance in producing variations that are observed within cogenetic suites of granites. In low‐temperature granite suites, crystal fractionation initially involves the progressive separation of crystals residual from partial melting from that partial melt. Once separation of those crystals, or restite, has been completed, further fractionation may occur through the separation of crystals that had precipitated from the melt, the process known as fractional crystallization. High‐temperature granite magmas are largely or completely molten and elements such as Ca, Mg and Fe, and their associated minor elements, are in that case dissolved in the melt. Such magmas, particularly those that are more potassic and hence contain a higher fraction of low temperature melt, may evolve compositionally through fractional crystallization. Cumulate rocks result, comprising a framework of cumulus minerals with interstitial melt. In this process some of the melt is also displaced to form more felsic rocks. Such cumulate rocks may have distinctive chemical compositions, but that is often not the case. Distinctive features include SiC>2 contents near or below 50 % in rocks that are transitional in the field to more felsic granites, very high Cr and Ni, very low K, P, Ba, Rb and Zr, and anomalous abundances of the anorthite components Ca and Al. These rocks may also have positive Eu anomalies. Cumulate rocks do not necessarily have distinctive textures, at least as such features are understood at this time. Fractional crystallization can also involve the movement of precipitated crystals relative to melt. We refer to rocks as cumulative when formed from the fractions in which the abundance of crystals has increased. The production of cumulative granites typically occurs at more felsic melt compositions than is the case for cumulate granites, and this process may have its greatest significance in the fractional crystallization of the felsic haplogranites. Relative to felsic granites of broadly similar compositions lying on a liquid line of descent, cumulative granites contain more Ca, reflecting the addition from elsewhere of plagioclase crystals with solidus compositions. The abundances of Sr and Ba may be high to very high, and sometimes there are positive Eu anomalies. Cumulative I‐type granites may have low abundances of Y and the heavy REE, while the S‐type granites can be very distinctive with anomalously high abundances of Th and the heavy REE resulting from the concentrating of monazite. Generally, but not always, those who propose fractional crystallization as a mechanism for producing compositional variation within a suite of granites do not state whether the rocks in that particular case are thought to lie on a liquid line of descent or are cumulates/cumulative, although it is generally presumed that they were melts. Our experiences in eastern Australia have shown that the mechanism of fractional crystallization was quantitatively not as important during granite evolution as many workers would expect. However, there are some excellent examples of that process, most notably the Boggy Plain Supersuite. Overall in eastern Australia, varying degrees of separation of restite is a much more common mode of crystal fractionation, and that may also be seen to be the case for some other granite provinces if they are examined with that possibility in mind. 相似文献
9.
现代新技术新方法与工程地质 总被引:1,自引:0,他引:1
陈剑平 《水文地质工程地质》1997,24(2):46-48
本文阐述了瓣技术,新方法应用于工程地质研究取得的进展,内容涉及原位测试技术,数值模拟技术,物理模拟技术和物探测技术,这些方面的研究推动了工程地质学的发展。 相似文献
10.
Etch and intracutaneous landforms and their implications 总被引:1,自引:0,他引:1
C. R. Twidale 《Australian Journal of Earth Sciences》2013,60(3):367-386
Many landforms, major and minor, and including plains of various types, inselbergs, boulders, flared slopes, Rillen and rock basins, are initiated beneath the land surface, at the weathering front. They have evolved in various lithological settings. Most are formed by differential moisture attack, either controlled, or strongly influenced, by bedrock structure. Such forms of subsurface derivation may be differentiated into etch or subcutaneous features that were initiated at the base of the regolith, and intracutaneous forms that had their origin within the weathering zone. Although the agent or agents responsible for eroding the regolith and exposing the bedrock forms have varied in space and time, the similarity of etch and intracutaneous forms is such that their basic morphology persists regardless of the climatic regime in which they now occur. As the regolith is widely developed on the land surface, the forms initiated beneath and within it cannot be taken as climatic indicators. Indeed, like structural forms, these convergent forms represent a varied but significant azonal element in the physiographic landscape. 相似文献
11.
中国东部中生代高Sr低Yb和低Sr高Yb型花岗岩:对比及其地质意义 总被引:29,自引:8,他引:21
中国东部在晚中生代时(晚侏罗世-旱白垩世)有广泛的中酸性岩浆活动,按照花岗岩的地球化学特征,大致可以划分为东北、华北和华南3个岩区。本文研究表明,按照Sr和Yb的含量,大致可以将花岗岩分为5类.即:高Sr低Yb型(Sr〉400μg/g,Yb〈2μg/g)、低Sr低Yb(Sr〈400μg/g,Yb〈2μ/g)、低Sr高Yb(Sr〈400μg/g,Yb〉2μg/g)、高Sr高Yb型(Sr〉400μg/g,Yb〉2μg/g)以及非常低Sr高Yb型(Sr〈100μg/g,Yb=2—18μg/g)花岗岩。东北和华南以发育低Sr高Yb花岗岩为主,有少量高Sr低Yb和非常低Sr高Yb类型的花岗岩分布;而华北则以高Sr低Yb型花岗岩(埃达克岩)最发育,低Sr高Yb、低Sr低Yb型和非常低Sr高Yb型花岗岩有少量分布。本文着重探讨了华北和华南花岗岩的特征,认为华北和华南花岗岩地球化学的区别可能主要与花岗岩源区成分和深度有关,且主要受源区深度的控制。如果花岗岩熔融的源区残留相由榴辉岩组成(石榴石+辉石+金红石+/一角闪石),则花岗岩明显亏损HREE、Nb、Ta和Ti,而富集Sr和Al,无明显的负铕异常,属于高Sr低Yb(埃达克岩)类型;如果源区深度浅,由斜长角闪岩或麻粒岩组成(斜长石+辉石+角闪石),则花岗岩相对贫Sr富Yb。作者认为,华北和华南花岗岩地球化学特征上的上述差异,表明在晚中生代时(晚侏罗世.早白垩世)。华北和华南的地壳厚度不同:华北较厚,华南较薄;华北经历了下地壳拆沉而华南无;华北和华南的下地壳成分不同,华北较基性的下地壳拆沉后,留下的地壳平均成分与华南比偏中性。 相似文献
12.
Results of numerical analyses of boundary value problems in geomechanics include output of three‐dimensional stress and strain states. Two‐dimensional plots of stress–stress or stress–strain quantities, often used to represent such output, do not fully communicate the evolution of stress and strain states. This paper describes the use of glyphs and hyperstreamlines for the visual representation of three dimensional stress and strain tensors in geomechanics applications. Glyphs can be used to represent principal stress states as well as normal stresses at a point. The application of these glyphs is extended in this paper to represent strain states. The paper introduces a new glyph, called HWY glyph for the representation of shear tensor components. A load step‐based hyperstreamline is developed to show the evolution of a stress or strain tensor under a general state of loading. The evolution of stress–strain states from simulated laboratory tests and a general boundary value problem of a deep braced excavation are represented using these advanced visual techniques. These visual representations facilitate the understanding of complex multidimensional stress–strain soil constitutive relationships. The visual objects introduced in this paper can be applied to stress and strain tensors from general boundary value problems. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
13.
施工瓦斯抽采钻孔是治理瓦斯危害的必要手段,针对松软煤层钻进因钻杆自重大引起的钻进阻力大、钻进效率低及劳动强度高等问题,提出了优化钻杆结构以减少自重并降低钻进阻力的研究思路,通过设置四翼内凹结构达到减小钻杆自重及降低钻进阻力的目的,并依此设计了四翼内凹刻槽钻杆,兼顾钻杆推进阻力和旋转扭矩损失,建立了钻杆钻进阻力模型,结合ANSYS数值模拟方法对四翼内凹刻槽钻杆进行强度校核分析与参数优化,研制了四翼内凹刻槽钻杆,并进行了现场工业性试验。研究表明:(1)对于100 m钻孔深度,四翼内凹刻槽钻杆相对于圆状刻槽钻杆质量减轻了21.88%,在正常钻进时,四翼内凹刻槽钻杆与圆钻杆相比旋转扭矩损失降低了25.10%;与圆状刻槽钻杆相比降低了20.90%。在塌孔10 m的情况下,四翼内凹刻槽钻杆钻进阻力相对于圆钻杆降低了51.44%,相对于圆状刻槽钻杆降低了43.65%。(2)对四翼内凹刻槽钻杆进行强度分析与参数优化,结果显示,在常规坑道钻机作用下,钻杆最大应力与内凹深度呈正相关,与壁厚呈负相关,壁厚对于应力的影响大于内凹深度的影响,且在内凹宽度为33 mm、深度为4 mm、壁厚为11.5 mm时,安全系数为1.59。(3)现场工业性试验表明,四翼内凹刻槽钻杆排渣顺畅,强度可靠,钻进深度提高了18.18%,钻进效率提高了17.80%。在保证钻杆强度的前提下、通过钻杆结构创新有效降低钻杆质量,对于降低工人劳动强度、提高钻进效率和成孔率具有显著的效果,为推动复杂地层钻探技术发展提供了新的方法。
相似文献14.
毫米波测云雷达的特点及其研究现状与展望 总被引:17,自引:2,他引:15
云在大气的能量分配、辐射传输,尤其是水循环系统中有不可忽视的作用。云探测对云物理、人工影响天气、气候变化和航空航天等领域有重要意义,是大气科学研究的热点之一。尽管目前已经发展了很多种遥感设备对云进行观测(如激光雷达、卫星、云幂仪等),但这些设备无法得到高时空分辨率的云水平和垂直结构,而毫米波雷达是云三维精细结构探测的重要工具。由于毫米波雷达具有更接近小粒子尺度的短波长,因此更适合用来探测弱云,同时毫米波雷达也存在衰减严重的缺点。介绍了毫米波雷达的特点以及其探测小粒子的优势;对比分析了其与新一代多普勒天气雷达、晴空风廓线雷达的差异,得出:毫米波雷达具有高时空分辨率,能够更精确地反映云的垂直和水平结构,比普通天气雷达更适合监测云的变化。概括了国内外毫米波测云雷达的发展现状以及在云物理研究方面的情况,并展望了国内毫米波雷达未来研究的方向。 相似文献
15.
Partition of Fe2+ and Mg between coexisting (Mg, Fe)2SiO4 spinel and (Mg, Fe)SiO3 pyroxene was investigated at pressures 80 and 90 kbar and at temperatures 840 and 1050° C, using tetrahedral-anvil type of high pressure apparatus. Olivine-spinel solid solution equilibria in the system Mg2SiO4-Fe2SiO4 were discussed in the light of the partition reaction. Partition of Fe2+ and Mg in both olivine-spinel and pyroxene-spinel systems can not be regarded as that between ideal solid solutions. By applying the simple solution model for the partition of Fe2+ and Mg, sign of the heat of mixing was estimated to be positive for all olivine, spinel and pyroxene. Relative concentration of Fe2+ in spinel in the pyroxene-spinel system is likely to cause some change in the chemical composition of modified spinel () or spinel () in the transition zone of the mantle. A considerable change is also expected in the transition pressure of to ( + ) and ( + ) to .Presented at the symposium Recent Advances in the Studies of Rocks and Minerals at High Pressures and Temperatures held in Montreal, 1972. Jointly sponsored by the International Mineralogical Association and the Commission on Experimental Petrology. 相似文献
16.
区域构造、地球化学与成矿 总被引:12,自引:2,他引:10
成矿是一种复杂的地质作用,区域构造与区域地球化学是控制成矿的基本要素.文中简略叙述了构造成矿研究的历史,论述了大型构造与成矿的关系,提出构造动力体制转换是引发成矿作用的一种重要机制.通过对我国矿田构造研究的回顾,总结提出构造研究的一些思路,同时对区域地球化学与成矿、上地幔元素丰度与成矿以及地球化学急变带与成矿等做了简要的讨论,认为岩石圈及地质体中一定含量的金属元素是成矿的必要条件,而成矿尚需一定的地质作用对这些金属元素的浓集. 相似文献
17.
18.
景观格局与水土流失的尺度特征与耦合方法 总被引:11,自引:0,他引:11
景观格局与生态过程的耦合研究是景观生态学研究的核心科学问题,也是综合自然地理学深化和发展的关键.尺度广泛存在于生态学现象中,尺度效应与尺度转换是景观生态学研究面临的挑战,探讨格局与过程之间相互作用机理与尺度特征是为解决尺度问题提供理论依据的必然途径.水土流失作为一种生态过程,是国内外颇为关注的生态问题.依据多种研究手段,在不同尺度上开展景观格局与水土流失的相互关系与尺度特征的研究,在分析景观格局的时空异质性、水土流失的影响因子与尺度效应的基础上,揭示流域景观格局与水土流失的耦合机理,发展尺度转换方法和景观格局-水土流失过程耦合模型,是完善景观生态学的理论基础,是为水土流失区生态建设提供科学依据的重要途径. 相似文献
19.
《International Geology Review》2012,54(5):526-533
The impact of gigantic meteorites momentarily creates extremely high pressures and temperatures, leading to the formation of distinctive objects — impact breccias and impactites — at the points where they fall. The Zhamanshin crater is one such place. This annular structure has a diameter of about 10 km, contoured by a low rim made up of a body of shattered Paleozoic rocks thrown out from the ring's center, from depths exceeding 100 - 200 m. Among these breccias have been found pieces and lenticular bodies of remelted rocks — impactites, called zhamanshinites. These thermally altered rocks from a series ranging from baked clays to cinder-like, partly recrystallized substances, glass, and black drops and spattered droplets (up to 1 - 5 cm) of isotropic glass that undoubtedly hardened as they fell through the air. The refused neogenic substances formed by selective evaporation are characterized by a considerable deficit of K and Na, excess Al2O3 and SiO2, a lack of H2O, and a sharp predominance of Fe+2 over Fe+3. Their characteristic shape and distinctive structure and composition suggests that these remelted droplets are tektites, which were called irgizites when first found in the USSR. Their occurrence in the meteorite crater confirms the idea of a genetic unity between tektites and impactites. Selective evaporation of the more volatile elements is characteristic of the surfaces of small planets lacking an atmosphere, but is not characteristic of the earth's surface. The processes and substances occurring at the impact points of gigantic meteorites are therefore unique on the earth, but highly typical of the surfaces of the Moon, Mars, Mercury, and other relatively small celestial bodies. 相似文献
20.
Katy A. Boon Paul D. Taylor Michael H. Ramsey 《Geostandards and Geoanalytical Research》2007,31(3):237-249
Measurements taken to characterise environmental contamination contain uncertainty, which is generated by both field sampling and chemical analyses. Recently devised techniques have been applied for the first time to estimate this uncertainty in the commercial monitoring and assessment of contaminated land. The uncertainty reduces the reliability of the classification of the land that is made following a site investigation. The possible misclassification of areas of land, as a result of measurement uncertainty, can lead to substantial financial penalties, resulting from litigation or unnecessary remediation. Previous studies have developed methods for the estimation and financial optimisation of measurement uncertainty. These methods have now been applied to a series of six contrasting site investigations, which were conducted by various commercial organisations. The previous uses of these sites included a gas works, a tin mine and railway sidings. The measurement uncertainty was successfully estimated for each of the six investigations, showing its applicability to a wide range of different sampling methods, such as trial pits, window sampling and augering. The measurement uncertainty ranged widely between sites from 25% to 158%, indicating that investigations can differ widely in their reliability. The field sampling tended to generate the largest component of the measurement uncertainty when compared to the contribution from the chemical analysis. The Optimised Contaminated Land Investigation (OCLI) method was applied to each site, with the initial aim of estimating the financial losses that could be incurred as a result of misclassifying the land, due to the uncertainty. It showed that the expectation of loss value per sampling location ranged from only £58 at one site to over £ 11 000 at another. The optimal level of uncertainty that produced the minimal financial loss was then calculated for each site. It provided a reduction in the expectation of loss for the whole site of over £ 10 000 at two of the sites and over £90 000 at two others. These findings demonstrate that implementing concepts of uncertainty can have practical benefits in environmental monitoring, and can enable improvements to be made in the quality of sampling and hence of measurements in general. 相似文献