Morphology and origin of ridges in low-latitude areas of Mars

The Martian ridges present a larger diversity of forms and patterns than the lunar ridges. The main explanation is the following: unlike the lunar-ridges, the low latitude ridges on Mars are not related to volcanism, but are in close connection with hydro-lithosphere. Their morphologic similarities with the lunar ridges are probably due to a similar dynamic origin — i.e., compression of a thin crust lying unconformably over the substratum (on Mars, porous sediments saturated with water). It is suggested that in some areas Martian ridges are mainly of extrusive origin (material extruded from the hydro-lithosphere), unlike the lunar ridges.

---

Résumé Les rides de Mars présentent une plus grande diversité de formes et de dispositions que les rides de la Lune. Alors que les rides de la Lune sont liées au volcanisme des mers, les rides de Mars sont en étroite relation avec l'existence d'une hydrolithosphère, et là résidue sans doute la cause des différences observées. Les analogies morphologiques avec les rides de la Lune s'expliquent le mieux par une origine dynamique comparable, à savoir la compression d'une croûte suffisamment mince reposant en discordance sur un substratum constitué sur Mars par des sédiments poreux gorgés d'eau. Il est suggéré que dans certaines régions de Mars les rides sont surtout des formes extrusives, constituées par du matérial originaire de l'hydrolithosphére.

     

The role of arcuate ridges and gullies in the degradation of craters in the Newton Basin region of Mars

A survey of craters in the vicinity of Newton Basin, using high-resolution images from Mars Global Surveyor and Mars Odyssey, was conducted to find and analyze examples of gullies and arcuate ridges and assess their implications for impact crater degradation processes. In the Phaethontis Quadrangle (MC-24), we identified 225 craters that contain these features. Of these, 188 had gullies on some portion of their walls, 118 had arcuate ridges at the bases of the crater walls, and 104 contained both features, typically on the same crater wall. A major result is that the pole-facing or equator-facing orientation of these features is latitude dependent. At latitudes >44° S, equator-facing orientations for both ridges and gullies are prevalent, but at latitudes <44° S, pole-facing orientations are prevalent. The gullies and arcuate ridges typically occupy craters between ∼2 and 30 km in diameter, at elevations between −1 and 3 km. Mars Orbiter Laser Altimeter (MOLA) elevation profiles indicate that most craters with pole-facing arcuate ridges have floors sloping downward from the pole-facing wall, and some of these craters show asymmetry in crater rim heights, with lower pole-facing rims. These patterns suggest viscous flow of ice-rich materials preferentially away from gullied crater walls. Clear associations exist between gullies and arcuate ridges, including (a) geometric congruence between alcoves and sinuous arcs of arcuate ridges and (b) backfilling of arcuate ridges by debris aprons associated with gully systems. Chronologic studies suggest that gullied walls and patterned crater floor deposits have ages corresponding to the last few high obliquity cycles. Our data appear consistent with the hypothesis that these features are associated with periods of ice deposition and subsequent erosion associated with obliquity excursions within the last few tens of millions of years. Arcuate ridges may form from cycles of activity that also involve gully formation, and the ridges may be in part due to mass-wasted, ice-rich material transported downslope from the alcoves, which then interacts with previously emplaced floor deposits. Most observed gullies may be late-stage features in a degradational cycle that may have occurred many times on a given crater wall.     

Carbon dioxide glaciers on Mars: Products of recent low obliquity epochs (?)

Three localized sets of small arcuate ridges associated with slopes in the northern polar area of Mars (∼70°N latitude) are morphologically similar to sets of drop moraines left by episodes of advance and retreat of cold-based glaciers. Comparison with other glacial features on Mars shows that these features differ in important aspects from those associated with water–ice flow. Instead, we interpret these features to be due to perennial accumulation and flow of solid carbon dioxide during recent periods of very low spin-axis obliquity.     

Glacial,periglacial and glacio-volcanic structures on the Echus Plateau,upper Kasei Valles

An extensive region of low, sinuous ridges occupies the Hesperian plateau above Echus Chasma in the upper Kasei Valles, Mars. The ridges have lengths of up to 270 km, heights of 100 m and widths of 10 km. The total volume of the ridge material is 6×10¹¹ m³. In this paper, volcanic flows, depositional and erosional features are discussed using Mars Observer Laser Altimeter (MOLA), THEMIS and Mars Orbiter Camera (MOC) imagery and a chronology that places the ridge formation in the Late Hesperian is developed.The plateau is bounded to the north and west by more recent Late Hesperian and Amazonian lava flows. The plateau floor suddenly changes from being relatively smooth, to elevated, rough, hummocky terrain that extends eastwards to Echus Chasma. This rough terrain is penetrated by 2 km broad, shallow entrant channels that join with the canyons of Echus Chasma. The sinuous ridges appear to control the surface drainage associated with the entrant channels.The sinuous ridges’ size and morphology are similar to those associated with volcanic ridge eruptions. Their degraded structure is reminiscent of Moberg ridges. The rough, hummocky terrain is interpreted as glacial outwash, subsequently eroded by short-lived floods associated with ridge eruptions. The presence of both volcanic and glacial structures on the Echus Plateau raises the possibility that the ridge system arose from subglacial, volcanic events. The resulting jokulhlaups eroded the broad, entrant channels. As surface flow declined, groundwater flows dominated and canyon heads eroded back along the entrant channels, by sapping.     

Phreato-magmatic dike-cryosphere interactions as the origin of small ridges north of Olympus Mons, Mars

Using images from the Mars Orbiter Camera, we have identified several linear ridges located 10-60 km north of the volcano Olympus Mons, Mars, at the edge of the Olympus Mons aureole materials. These ridges appear to be made of unconsolidated material by virtue of the many dust avalanche scars seen on their upper slopes. Based upon their morphology (several ridges have crater-like central depressions) and superposition relationships, the ridges appear to have formed very recently and post-date the formation of the youngest lava flows spilling over the northern escarpment of Olympus Mons. Several possible origins for the ridges, including an eolian, periglacial, or depositional origin have been considered, but we favor a ridge origin by a series of small explosive eruptions initiated by the intrusion of a dike into a volatile-rich substrate. To explore this process, we develop a numerical model for dike intrusion into a volatile-rich substrate that yields plausible dike widths between 2.4-3.5 m. The total volume of a single ridge system is ∼65×10⁶ m³, and we calculate that it may have taken only a few minutes to form. Viable solutions only exist when the thicknesses of the ice-rich layer is less than ∼1000-2000 m. This strongly suggests that the ice-rich region is limited in its vertical extent to a value of this order.     

HiRISE images of yardangs and sinuous ridges in the lower member of the Medusae Fossae Formation, Mars

HiRISE images of the lower member of the Medusae Fossae Formation (MFF) were used to identify characteristics of two specific landforms that are well expressed in this particular geologic unit; yardangs and sinuous ridges. Yardangs are wind-eroded ridges that are usually confined to arid environments where the bedrock materials can be easily eroded by windblown sand. Yardangs are common in the lower member of MFF, where many individual yardangs show evidence of a caprock unit overlying a more friable unit, most consistent with an ignimbrite origin for these MFF deposits. Heights of the yardangs in the lower member materials are generally less than a few tens of meters, in contrast to yardangs in the thicker middle member MFF materials to the east of the study area. The yardangs may form in materials comprised of discrete depositional units, and there is good evidence that at least a dozen such depositional events contributed to the emplacement of the lower member of MFF. The lower member yardang heights indicate aeolian erosion has removed at least 19,000 km³ of lower member MFF materials. Sinuous ridges are elongate, positive-relief landforms that have been attributed to a variety of possible fluvial flow processes on Mars. Sinuous ridges are very common within exposures of the lower member of MFF. Multiple ridge types are present, but all forms seen at HiRISE scale are most consistent with some form of aqueous channel flow rather than other possible origins. The results from this initial examination of HiRISE images indicate the potential utility of comparing yardangs and sinuous ridges in the lower member to other members of MFF, although it remains to be determined if sinuous ridges are abundant in the younger MFF members.     

Mesoscale raised rim depressions (MRRDs) on Earth: A review of the characteristics,processes, and spatial distributions of analogs for Mars

Fields of mesoscale raised rim depressions (MRRDs) of various origins are found on Earth and Mars. Examples include rootless cones, mud volcanoes, collapsed pingos, rimmed kettle holes, and basaltic ring structures. Correct identification of MRRDs on Mars is valuable because different MRRD types have different geologic and/or climatic implications and are often associated with volcanism and/or water, which may provide locales for biotic or prebiotic activity. In order to facilitate correct identification of fields of MRRDs on Mars and their implications, this work provides a review of common terrestrial MRRD types that occur in fields. In this review, MRRDs by formation mechanism, including hydrovolcanic (phreatomagmatic cones, basaltic ring structures), sedimentological (mud volcanoes), and ice-related (pingos, volatile ice-block forms) mechanisms. For each broad mechanism, we present a comparative synopsis of (i) morphology and observations, (ii) physical formation processes, and (iii) published hypothesized locations on Mars. Because the morphology for MRRDs may be ambiguous, an additional tool is provided for distinguishing fields of MRRDs by origin on Mars, namely, spatial distribution analyses for MRRDs within fields on Earth. We find that MRRDs have both distinguishing and similar characteristics, and observation that applies both to their mesoscale morphology and to their spatial distribution statistics. Thus, this review provides tools for distinguishing between various MRRDs, while highlighting the utility of the multiple working hypotheses approach.     

Methane emissions from Earth’s degassing: Implications for Mars

The presence of methane on Mars is of great interest, since one possibility for its origin is that it derives from living microbes. However, CH₄ in the martian atmosphere also could be attributable to geologic emissions released through pathways similar to those occurring on Earth. Using recent data on methane degassing of the Earth, we have estimated the relative terrestrial contributions of fossil geologic methane vs. modern methane from living methanogens, and have examined the significance that various geologic sources might have for Mars.Geologic degassing includes microbial methane (produced by ancient methanogens), thermogenic methane (from maturation of sedimentary organic matter), and subordinately geothermal and volcanic methane (mainly produced abiogenically). Our analysis suggests that ～80% of the “natural” emission to the terrestrial atmosphere originates from modern microbial activity and ～20% originates from geologic degassing, for a total CH₄ emission of ～28.0×10⁷ tonnes year^?1.Estimates of methane emission on Mars range from 12.6×10¹ to 57.0×10⁴ tonnes year^?1 and are 3–6 orders of magnitude lower than that estimated for Earth. Nevertheless, the recently detected martian, Northern-Summer-2003 CH₄ plume could be compared with methane expulsion from large mud volcanoes or from the integrated emission of a few hundred gas seeps, such as many of those located in Europe, USA, Mid-East or Asia. Methane could also be released by diffuse microseepage from martian soil, even if macro-seeps or mud volcanoes were lacking or inactive. We calculated that a weak microseepage spread over a few tens of km², as frequently occurs on Earth, may be sufficient to generate the lower estimate of methane emission in the martian atmosphere.At least 65% of Earth’s degassing is provided by kerogen thermogenesis. A similar process may exist on Mars, where kerogen might include abiogenic organics (delivered by meteorites and comets) and remnants of possible, past martian life. The remainder of terrestrial degassed methane is attributed to fossil microbial gas (～25%) and geothermal-volcanic emissions (～10%). Global abiogenic emissions from serpentinization are negligible on Earth, but, on Mars, individual seeps from serpentinization could be significant. Gas discharge from clathrate-permafrost destabilization should also be considered.Finally, we have shown examples of potential degassing pathways on Mars, including mud volcano-like structures, fault and fracture systems, and major volcanic edifices. All these types of structures could provide avenues for extensive gas expulsion, as on Earth. Future investigations of martian methane should be focused on such potential pathways.     

Global and regional ridge patterns on Mars

Over 16,000 wrinkle ridges on Mars have been classified, mapped, and digitized to provide a large computer-accessible data base for analyzing regions subjected to possible compressive stresses. The survey has revealed major compressive structures that occur well beyond the Tharsis-dominated hemisphere. The large variety of affected geologic terrains indicate stresses not simply localized in the intercrater plains. One major area of inferred compression occurs in the southern cratered highlands near longitude 180°W where major ridges and scarps extend over 3000 km. The occurrence and orientation of many ridges are locally controlled by ancient impact basins. The Chryse basin in particular has an important effect on ridges in northern Lunae Planum. The removal of all basin-concentric ridges reveals, however, a complex global pattern. Although such patterns may yet be controlled by heavily degraded impact basins, major regional trends also emerge that appear to require broader scale global stresses. Most ridges in the Western Hemisphere are shown to be orthogonal to three centers corresponding to Tharsis (1°N, 122°W), Syria (12°S, 104°W), and Chryse (19°N, 47°W). Ridges not included in these three sets are generally more random and highly localized. Most, but by no means all, ridges in the Eastern Hemisphere are controlled by the Hellas and Isidis basins. A simple global grid is not yet identifiable and may not be recognizable owing to the large number of regional patterns.     

Pervasive aqueous paleoflow features in the Aeolis/Zephyria Plana region, Mars

A survey of THEMIS visible wavelength images in the Aeolis/Zephyria Plana region over the two western lobes of the equatorial Medusae Fossae Formation (MFF) shows ∼150 sinuous ridges having a variety of morphologies and contexts. To systematize investigation, we use a classification scheme including both individual ridge and ridge network types, as well as associations with impact craters and fan-shaped features. The morphology of the ridges, their location downslope from higher topography (e.g., crater rims and scarps), and their association with fan-shaped forms indicate that most sinuous ridges formed through overland aqueous flow. Analysis of observations by individual ridge type leads to interpretation of most of these sinuous ridges as inverted fluvial channels or floodplains and a few as possible eskers, with the origin of the remaining ridges under continuing investigation. About 15% of the sinuous ridges are associated with impact craters, but data analysis does not support a genetic relationship between the craters and the sinuous ridges. Instead, analysis of one sinuous ridge network associated with a crater indicates that the water source for the network was atmospheric in origin, namely, precipitation runoff. The broad areal distribution of these ∼150 ridges and the network morphologies, in particular the branched and subparallel types, suggest that an atmospheric water source is generally applicable to the population of sinuous ridges as a whole. This concentration of sinuous ridges is the largest single population of such landforms on Mars and among the youngest. These ridges are situated at a paleoscarp between Cerberus Palus and the Aeolis highlands, suggesting that the precipitation that formed them was orographic in origin. The ages of the equatorial MFF units in which this population of sinuous ridges is found imply that this orographic rain and/or snow fell during some period from the late Hesperian through the middle Amazonian.     

Central pit craters on Ganymede

Central pit craters are common on Mars, Ganymede and Callisto, and thus are generally believed to require target volatiles in their formation. The purpose of this study is to identify the environmental conditions under which central pit craters form on Ganymede. We have conducted a study of 471 central pit craters with diameters between 5 and 150 km on Ganymede and compared the results to 1604 central pit craters on Mars (diameter range 5-160 km). Both floor and summit pits occur on Mars whereas floor pits dominate on Ganymede. Central peak craters are found in similar locations and diameter ranges as central pit craters on Mars and overlap in location and at diameters <60 km on Ganymede. Central pit craters show no regional variations on either Ganymede or Mars and are not concentrated on specific geologic units. Central pit craters show a range of preservation states, indicating that conditions favoring central pit formation have existed since crater-retaining surfaces have existed on Ganymede and Mars. Central pit craters on Ganymede are generally about three times larger than those on Mars, probably due to gravity scaling although target characteristics and resolution also may play a role. Central pits tend to be larger relative to their parent crater on Ganymede than on Mars, probably because of Ganymede’s purer ice crust. A transition to different characteristics occurs in Ganymede’s icy crust at depths of 4-7 km based on the larger pit-to-crater-diameter relationship for craters in the 70-130-km-diameter range and lack of central peaks in craters larger than 60-km-diameter. We use our results to constrain the proposed formation models for central pits on these two bodies. Our results are most consistent with the melt-drainage model for central pit formation.     

Polygonal impact craters in Argyre region,Mars: Implications for geology and cratering mechanics

Abstract— Impact craters are not always circular; sometimes their rims are composed of several straight segments. Such polygonal impact craters (PICs) are controlled by pre‐existing target structures, mainly faults or other similar planes of weakness. In the Argyre region, Mars, PICs comprise ? 17% of the total impact crater population (>7 km in diameter), and PICs are relatively more common in older geologic units. Their formation is mainly controlled by radial fractures induced by the Argyre and Ladon impact basins, and to a lesser extent by the basin‐concentric fractures. Also basin‐induced conjugate shear fractures may play a role. Unlike the PICs, ridges and graben in the Argyre region are mostly controlled by Tharsis‐induced tectonism, with the ridges being concentric and graben radial to Tharsis. Therefore, the PICs primarily reflect an old impact basin‐centered tectonic pattern, whereas Tharsis‐centered tectonism responsible for the graben and the ridges has only minor influence on the PIC rim orientations. According to current models of PIC formation, complex PICs should form through a different mechanism than simple PICs, leading to different orientations of straight rim segments. However, when simple and complex PICs from same areas are studied, no statistically significant difference can be observed. Hence, in addition to enhanced excavation parallel to the strike of fractures (simple craters) and slumping along the fracture planes (complex craters), we propose a third mechanism involving thrusting along the fracture planes. This model is applicable to both simple and small complex craters in targets with some dominating orientations of structural weakness.     

Magnitude of global contraction on Mars from analysis of surface faults: Implications for martian thermal history

Faults provide a record of a planet’s crustal stress state and interior dynamics, including volumetric changes related to long-term cooling. Previous work has suggested that Mars experienced a pulse of large-scale global contraction during Hesperian time. Here we evaluate the evidence for martian global contraction using a recent compilation of thrust faults. Fault-related strains were calculated for wrinkle ridges and lobate scarps to provide lower and upper bounds, respectively, on the magnitude of global contraction from contractional structures observed on the surface of Mars. During the hypothesized pulse of global contraction, contractional strain of −0.007% to −0.13% is indicated by the structures, corresponding to decreases in planetary radius of 112 m to 2.24 km, respectively. By contrast, consideration of all recognized thrust faults regardless of age produces a globally averaged contractional strain of −0.011% to −0.22%, corresponding to a radius decrease of 188 m to 3.77 km since the Early Noachian. The amount of global contraction predicted by thermal models is larger than what is recorded by the faults at the surface, paralleling similar studies for Mercury and the Moon, which suggests that observations of fault populations at the surface may provide tighter bounds on planetary thermal evolution than models alone.     

Strength of Faults on Mars from MOLA Topography

The stresses which must be maintained on faults bounding the rift topography at Tempe Fossae—the “North Tempe Rift” (NTR)—and Valles Marineris (VM) on Mars are estimated, using a simple elastic model and topographic data from the Mars Orbiter Laser Altimeter (MOLA). The absence of rift-flank uplift at the NTR is consistent with an elastic thickness, T_e, of 20 km or greater at the time of rift formation. The maximum resolved shear stresses on bounding faults due to this topography do not therefore exceed 20 MPa, similar to the inferred strength of terrestrial faults. Elastic thickness estimates at VM are mostly around 50 km or greater. Therefore, for canyon widths of ∼400 km, the bounding faults of VM, if present, must be able to withstand stresses of up to approximately 100 MPa. However, if the fault-controlled sections of the canyons do not exceed 150 km in width, as suggested by geomorphological analysis, the fault strength required is only 20 MPa. Although the maximum resolved shear stresses required to support the topography at VM may need to be greater than the stresses which terrestrial faults can support, at least some faults on Mars are no stronger than similar features on Earth. This observation is consistent with the existence of liquid water in the shallow subsurface of Mars at the time the faults were active. On Venus, plate tectonics is probably prevented by the frictional resistance to motion across strong faults. On Mars, it is more likely that the large thickness of the elastic layer of the lithosphere and the possible positive buoyancy of the crust are responsible for the observed lack of plate tectonics.     

Scalloped terrains in the Peneus and Amphitrites Paterae region of Mars as observed by HiRISE

The Peneus and Amphitrites Paterae region of Mars displays large areas of smooth, geologically young terrains overlying a rougher and older topography. These terrains may be remnants of the mid-latitude mantle deposit, which is thought to be composed of ice-rich material originating from airfall deposition during a high-obliquity period less than 5 Ma ago. Within these terrains, there are several types of potentially periglacial features. In particular, there are networks of polygonal cracks and scalloped-shaped depressions, which are similar to features found in Utopia Planitia in the northern hemisphere. This area also displays knobby terrain similar to the so-called “basketball terrains” of the mid and high martian latitudes. We use recent high resolution images from the High Resolution Imaging Science Experiment (HiRISE) along with data from previous Mars missions to study the small-scale morphology of the scalloped terrains, and associated polygon network and knobby terrains. We compare these with the features observed in Utopia Planitia and attempt to determine their formation process. While the two sites share many general features, scallops in Peneus/Amphitrites Paterae lack the diverse polygon network (i.e. there is little variation in the polygon sizes and shapes) and large curvilinear ridges observed in Utopia Planitia. This points to a more homogeneous ice content within the substrate in the Peneus/Amphitrites Paterae region and implies that scallop formation is independent of polygon formation. This work shows that, as in Utopia Planitia, sublimation of interstitial ice is a likely process explaining the formation of the scalloped depressions in the region of Peneus/Amphitrites Paterae. Therefore, we provide a simplified scallop formation model based on sublimation of interstitial ice as proposed for Utopia Planitia. We also show that the differences in scallop morphologies between the two regions may be explained by differences in near-surface ice content, sublimation rates and age of formation of the scalloped terrains.     

Microbial life in martian ice: A biotic origin of methane on Mars?

Despite the fact that microbial cells are unlikely to be found in the Martian soil in the near future, this paper is written on the assumption that some of the seasonally varying concentration of Martian methane is due to ongoing methanogenesis. It is first pointed out that life might have arisen on Mars first and been transported to Earth later. A case is made that an icy origin of life is more likely than a hot origin, especially if biomolecules take advantage of the high encounter rates and stability against hydrolysis, and that microorganisms feed on the ions that comprise eutectic solutions in ice. Although certain difficulties are avoided if RNA and DNA grow while adsorbed on clay grains, double strand-breaks of microbial DNA due to alpha radioactivity are a far greater threat to microbial survival on clay or other rock types than in ice. Developing a relation between the rate of microbial metabolism in ice and the experimentally determined rate of production of trapped gases of microbial origin, one can estimate the concentration of methanogens that could account for the methane production rate as a function of temperature of their habitat. The result, of order 1 cell cm⁻³ in the Martian subsurface, seems an attainable goal provided samples are taken from at least 1 or 2 m below the hostile surface of Mars. Instruments on NASA’s 2011 Mars Science Lab will measure stable isotopes for methane, water, and carbon dioxide, which on Earth served to distinguish abiotic, thermogenic, and microbial origins. Future measurements of chirality of biomolecules might also provide evidence for Martian life.     

Ridge belts on Venus: Morphology and origin

Ridge belts, composed of closely spaced individual ridges 5–20 km wide, form sinuous patterns 30–400 km wide and 200–2000 km long in the plains of northern Venus. They are not homogeneously distributed, but occur primarily in two regions: between 0 ° E and 90 ° E ridge belts are associated with large blocks of tessera, and have a cumulative length of about 13,200 km; and between 150 ° E and 250 ° E, the ridge belts form a fan-shaped pattern and have a total cumulative length of about 25,800 km. Most ridge belts trend within 10 ° of N-S. Five morphologic components exist within the ridge belts: (1) broad ridges, which have no sharp crest and usually occur individually in the plains: (2) discontinuous ridges, with short ridge segments less than 20 km long; (3) paired ridges, with closely spaced ridges (less than 10 km apart) that never merge; (4) parallel ridges, with widely spaced (10–50 km), less prominent ridges; and (5) anastomosing ridges, in which ridges splay at angles up to 30 °. Subtle cross-strike lineaments cut the ridge belts at angles of 30–90 ° to the ridge belt, and augen-shaped plains are often present in anastomosing ridges. We examine the relationships between the components, plains, cross-strike lineaments, and augen-shaped plains in five ridge belts. Broad arches similar to the arches associated with wrinkle ridges on the Moon, Mars and Mercury appear in all of the ridge belts examined. Through studying each of these components individually and in the context of five specific ridge belts, we conclude that these ridge belts formed by compressional forces. The ridge belts form a continuum of deformation, from the simple broad arches (Nephele Dorsa), representing small amounts of shortening, through asymmetric ridge belts in the plains (Pandrosa Dorsa) and adjacent to tessera (Kamari Dorsa), to ridge belts in troughs representing underthrusting (Ausra and Lukelong Dorsa). Underthrusting is also observed along the borders of Lakshmi Planum, associated with Freyja and Danu Montes.The interpreted compressional origins for the ridge belt components suggests that many of the other ridge belts are of compressional origin, although complex origins (involving a combination of extension, shear, and/or compression) for some ridge belts cannot be ruled out. Global high resolution data from the Magellan mission will permit global mapping of the characteristics and distribution of ridge belts and allow further tests for their origin and evolution.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence). Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Debris-covered piedmont glaciers along the northwest flank of the Olympus Mons scarp: Evidence for low-latitude ice accumulation during the Late Amazonian of Mars

We use Viking and new MGS and Odyssey data to characterize the lobate deposits superimposed on aureole deposits along the west and northwest flanks of Olympus Mons, Mars. These features have previously been interpreted variously as landslide, pyroclastic, lava flow or glacial features on the basis of Viking images. The advent of multiple high-resolution image and topography data sets from recent spacecraft missions allow us to revisit these features and assess their origins. On the basis of these new data, we interpret these features as glacial deposits and the remnants of cold-based debris-covered glaciers that underwent multiple episodes of advance and retreat, occasionally interacting with extrusive volcanism from higher on the slopes of Olympus Mons. We subdivide the deposits into fifteen distinctive lobes. Typical lobes begin at a theater-like alcove in the escarpment at the base of Olympus Mons, interpreted to be former ice-accumulation zones, and extend outward as a tongue-shaped or fan-shaped deposit. The surface of a typical lobe contains (moving outward from the basal escarpment): a chaotic facies of disorganized hillocks, interpreted as sublimation till in the accumulation zone; arcuate-ridged facies characterized by regular, subparallel ridges and interpreted as the ridges of surface debris formed by the flow of underlying ice; and marginal ridges interpreted as local terminal moraines. Several lobes also contain a hummocky facies toward their margins that is interpreted as a distinctive type of sublimation till shaped by structural dislocations and preferential loss of ice. Blocky units are found extending from the escarpment onto several lobes; these units are interpreted as evidence of lava-ice interaction and imply that ice was present at a time of eruptive volcanic activity higher on the slopes of Olympus Mons. Other than minor channel-like features in association with lava-ice interactions, we find no evidence for the flow of liquid water in association with these lobate features that might suggest: (1) near-surface groundwater as a source for ice in the alcoves in the lobe source region at the base of the scarp, or (2) basal melting and drainage emanating from the lobes that might indicate wet-based glacial conditions. Instead, the array of features is consistent with cold-based glacial processes. The glacial interpretations outlined here are consistent with recent geological evidence for low-latitude ice-rich features at similar positions on the Tharsis Montes as well as with orbital dynamic and climate models indicating extensive snow and ice accumulation associated with episodes of increased obliquity during the Late Amazonian period of the history of Mars.     

High latitude patterned grounds on Mars: Classification, distribution and climatic control

Patterned grounds such as polygonal features and slope stripes are the signature of the presence of ground ice and of temperature variations in cold regions on Earth. Identifying similar features on Mars is important to understand its past climate as well as the ground ice distribution. In this study, young patterned grounds are classed and mapped from the systematical analysis of Mars Observer Camera high resolution images. These features are located poleward of 55° latitude which fits the distribution of ground ice found by the Neutron Spectrometer onboard Mars Odyssey. Thermal contraction due to seasonal temperature variations is the predominant process of formation of polygons formed by cracks which sizes vary from 15 to 300 m. The small (<40 m) widespread polygons are very recent and degraded by the desiccation of ground ice from the cracks which enhances the effect of ice sublimation. The large polygons (50 to 300 m) located only around the south CO₂ polar cap indicate the presence of ground ice and thus outline the limit of the CO₂ ice cap. They could be due to the blanketing of water ice deposits by the advances and retreats of the residual CO₂ ice cap during the last thousand years. Large (50-250 m) and homogeneous polygons similar to ice wedge polygons, hillslope stripes and solifluction lobes may indicate that specific environments such as crater floors and hillslopes could have been submitted to freeze-thaw cycles, possibly related to higher summer temperatures in periods of obliquity higher than 35°. These interpretations must be strengthened by higher resolution images such as those of the HiRise mission of the Mars Reconnaissance Orbiter because locations with past seasonal thaw could be of major interest as potential landing sites for the Phoenix mission.     

Preliminary mariner 9 report on the geology of Mars

Mariner 9 pictures indicate that the surface of Mars has been shaped by impact, volcanic, tectonic, erosional and depositional activity. The moonlike cratered terrain, identified as the dominant surface unit from the Mariner 6 and 7 flyby data, has proven to be less typical of Mars than previously believed, although extensive in the mid- and high-latitude regions of the southern hemisphere. Martian craters are highly modified but their size-frequency distribution and morphology suggest that most were formed by impact. Circular basins encompassed by rugged terrain and filled with smooth plains material are recognized. These structures, like the craters, are more modified than corresponding features on the Moon and they exercise a less dominant influence on the regional geology. Smooth plains with few visible craters fill the large basins and the floors of larger craters; they also occupy large parts of the northern hemisphere where the plains lap against higher landforms. The middle northern latitudes of Mars from 90 to 150† longitude contain at least four large shield volcanoes each of which is about twice as massive as the largest on Earth. Steep-sided domes with summit craters and large, fresh-appearing volcanic craters with smooth rims are also present in this region. Multiple flow structures, ridges with lobate flanks, chain craters, and sinuous rilles occur in all regions, suggesting widespread volcanism. Evidence for tectonic activity postdating formation of the cratered terrain and some of the plains units is abundant in the equatorial area from 0 to 120° longitude.Some regions exhibit a complex semiradial array of graben that suggest doming and stretching of the surface. Others contain intensity faulted terrain with broader, deeper graben separated by a complex mosaic of flat-topped blocks. An east-west-trending canyon system about 100–200 km wide and about 2500 km long extends through the Coprates-Eos region. The canyons have gullied walls indicative of extensive headward erosion since their initial formation. Regionally depressed areas called chaotic terrain consist of intricately broken and jumbled blocks and appear to result from breaking up and slumping of older geologic units. Compressional features have not been identified in any of the pictures analyzed to data. Plumose light and dark surface markings can be explained by eolian transport. Mariner 9 has thus revealed that Mars is a complex planet with its own distinctive geologic history and that it is less primitive than the Moon.