小尺度海底沉积物的声衰减特性研究

为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。     

Experimental Studies of Sound Attenuation in Seabed Sediments on Column Sample Length Scale

Seabed sediment microstructure has an influence on its acousto-physical properties, and the properties in a length of the sediment column reflect an aspect of the macroscopic behavior of the microstructure. An original measurement method of the sound attenuation within small distance cross sections in a sediment column, and the corresponding approach in data processing to attain an attenuation factor are detailed in the paper. This method was used to measure the compressional wave in series of points with a small distance in the sediment column, and it is shown that exponential attenuation is a type of compressional wave attenuation model for a sediment column in its full length. It indicates that there are various models of compressional wave attenuation in seabed sediments in the South China Sea after comparison of data from other literature. The method of measuring sound attenuation satisfies the sampling space interval in the acoustical forward and inverse problems in seabed sediments, and the original method provides a new approach for finding out sound attenuation mechanism in seabed sediments on small length scale.     

多频海底声学原位测试系统研制和试用

海底沉积物的声学特性(最重要的是声速和声衰减)以及它们与物理(包括土力学)特性之间的关系是沉积物声学中两个重要的研究项目.介绍了新研制的实时监控多频海底声学原位测试系统.该系统可测量浅表层沉积物的声速.探测频率为8,10,12,15 kHz,可根据实际情况选择发射波形、接收增益和采样长度,采样率为0.5~2.0 MHz,工作水深为300 m.系统具有倾斜传感器、8通道扩充等功能.用该系统在杭州湾测得了四种频率的沉积物原位声速.     

岩心声速垂向变化对古海水进退的指示意义

钻孔岩心声速Cp垂向变化与地质历史中的海进、海退事件有关;南海北部大陆架及东海大陆架的钻孔岩心声速垂向变化曲线,为揭示西太平洋边缘海在更新世以来至少发生过3次海进和3次海退的3次沉积旋回事件提供了佐证。海进时所带来的海相沉积物的声速较低(1450—1510m·s-1),海退时所形成的陆相沉积物的声速较高(1650—1720m·s-1)。     

Chirp sub-bottom profiler source signature design and field testing

Chirp sub-bottom profilers are marine sonar systems which use a highly repeatable source signature to facilitate the acquisition of correlated data with decimetre vertical resolution in the top 20–30 m of sediments. Source signatures can be readily developed and implemented, but an applicable methodology for assessing resolution and attenuation characteristics of these wide-band systems did not exist. Methodologies are developed and applied to seven contrasting source signatures which occupy the same frequency band, but differ in their Envelope and Instantaneous Frequency functions. For the Chirp source signatures tested, a Sine-Squared envelope function is shown to produce seismic data with the optimum resolution and penetration characteristics.     

关于海底沉积物声特性实验室直接测量方法的探讨

海底沉积物声学特性实验室测量是除原位(in situ)测量之外最直接的沉积物声学特性测量方法。作为一项基础性研究,利用声波参数仪准确测量海底沉积物的声速和声衰减对建立海洋地声学模型具有重要意义。文章针对RS- ST01C型数字超声测试仪在测量过程中所存在的一些问题进行了探讨,对规范海底沉积物声学特性实验室测量方法具有实际意义。     

浅海沉积层声学特性对声传播损失的影响仿真研究

为厘清海底沉积层声学特性信息的水声环境保障需求,构建浅海两层海底环境参数模型,并参考Hamilton海底底质9种分类设置沉积层声速、密度、衰减系数及厚度的参考值及计算采样区间,利用Kraken简振波模型,采用控制变量的方法,研究了浅海沉积层声学特性参数对声传播损失的影响;开展了建模理论推导及数值技术分析,研究了海底沉积层声学特性参数在模型计算过程中调用过程,并从建模计算的角度对仿真计算的结果进行解释,对海底沉积层声学特性调查装备发展及调查重点参数具有一定的参考价值。     

Measurement of the In Situ Compressional Wave Properties of Marine Sediments

Geoacoustic inversion requires a generic knowledge of the frequency dependence of compressional wave properties in marine sediments, the nature of which is still under debate. The use of in situ probes to measure sediment acoustic properties introduces a number of experimental difficulties that must be overcome. To this end, a series of well-constrained in situ acoustic transmission experiments were undertaken on intertidal sediments using a purpose-built in situ device, the Sediment Probing Acoustic Detection Equipment (SPADE). Compressional wave speed and attenuation coefficient were measured from 16 to 100 kHz in medium to fine sands and coarse to medium silts. Spreading losses, which were adjusted for sediment type, were incorporated into the data processing, as were a thorough error analysis and an examination of the repeatability of both the acoustic wave emitted by the source and the coupling between probes and sediment. Over the experimental frequency range and source-to-receiver (S-R) separations of 0.99-8.1 m, resulting speeds are accurate to between 1.1% and 4.5% in sands and less than 1.9% in silts, while attenuation coefficients are accurate to between 1 and 7 dBm in both sands and silts. Preliminary results indicate no speed dispersion and an attenuation coefficient that is proportional to frequency.     

First arrival cycle-based calculation methods of in situ sound speed and attenuation in sediments

The acoustic properties of seafloor sediments are of great importance in geoacoustic modeling, detecting, and oceanic engineering. The methods based on the first arrival cycle are investigated to calculate sound speed and attenuation of sediment more precisely in in situ measurements. The comparison of different data analysis methods based on the first arrival cycle approach for in situ measurement results in the following conclusions: (1) the calculated methods can help find the effective cycles and reduce the errors in calculating sound speed and attenuation; (2) using this approach, the point judgment method-based data analysis has the same effectiveness as the cross-correlation method-based data analysis in calculating group sound speed and has the same effectiveness in calculating attenuation in the time domain as the spectrum analysis method-based data analysis has in calculating attenuation in frequency domain; and (3) measurement in water can help not only calibrate the transmitting distance but also can calculate the time delay for the sound speed and the attenuation loss in the transmitting process. Finally, theoretical calculation was used to calculate the measured results, indicating a good agreement, which supports that first arrival cycle-based calculated methods can be used to analyze the measured data and the effective density fluid model can be used to analyze more acoustic properties and invert several physical properties in this experiment.     

原位测量技术在黄海沉积声学调查中的应用

介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。     

北极冰下声传播特性实验研究

通过2017年8月6日在北极海域开展的一次声传播实验,开展了冰下声传播特性实验研究。结合Burke-Twersky （BT）散射模型与射线模型,分析了冰下声传播的多途到达结构,研究了接收声强变化规律,解释了接收声强在30 min内衰减20 dB的现象,分析了接收信号的时间相关性,探讨了接收信号相关性较低的原因。实验结果表明,表面接收信号主要由小角度多次反转反射声线、一次海底反射声线和二次海底反射声线依次构成,表面声道到达信号显著强于海底反射信号。试验冰站在试验期间的运动导致了声传播信号强度和相关性的迅速衰减,并通过仿真得到了验证。     

Vertical Variations of Core Sound Velocity: Evidence of Paleooceanographic History Since the Pleistocene Epoch

The vertical variations in the borehole core sound velocity (Cp) of the submarine sediments are related to the events of marine transgression and regression in the geologic history. This article establishes the vertical variation of Cp curve for the borehole sound velocity in the northern South China Sea continental shelf and the East China Sea continental shelf, thus providing evidence for revealing at least (3) sedimentary cycle events of marine transgression and regression occurring in the west Pacific marginal sea since the Pleistocene Epoch. The sound velocity of marine sediments brought in the course of marine transgression is lower (1450-1510 m/s) while that of continental sediments formed in the course of marine regression is higher (1650-1720 m/s).     

Investigation of the relationship between seafloor echo strength and sediment type—a case study in Jiaozgou Bay,China

In recent years, increasing attention is being given to investigating the relationships between seafloor echo strength and sediment type. This aspect was assessed in a course of a marine survey conducted in Jiaozhou Bay near the city of Qingdao, China, where various sediment types are known to exist. Multi-beam echo data and sediment samples were acquired, processed and analyzed. The findings demonstrate that multi-beam echo strengths are strongly related to seabed types such as rock, sand and clay. Thus, echo strength increases progressively with the increase in sand content in gravely, sandy, and clayey sediments. However, echo strength is more sensitive to changes in sand content in fine-grained sediment and less sensitive in coarse-grained sediment. Also, high shell content of sediments greatly enhances the acoustic reflection. These findings help to predict seafloor sediment types by analyzing echo strength.     

Acoustic wave attenuation in the gas hydrate-bearing sediments of Well GC955H,Gulf of Mexico

A better understanding of wave attenuation in hydrate-bearing sediments is necessary for the improved geophysical quantification of marine gas hydrates. Here we compare the attenuation behavior of hydrate-saturated vs water-saturated sediments at site GC955H, in the Gulf of Mexico, which was surveyed during the JIP Leg II expedition. We compute the P-wave attenuation of the gas hydrate bearing sediments using the median frequency shift method on the monopole waveforms. The results show that P-wave attenuation due to low saturation (<?0.4) in hydrate-filled fractures of fine-grained sediment is comparable to that of the water-filled fracture case. On the contrary, P-wave attenuation due to high saturation (>?0.4) in the hydrate-filled pores of coarse-grained sediments can be up to as much as three times more than that of the water-saturated case. The correlation analysis shows that the P-wave attenuation increases with the increasing gas hydrate saturation for the highly saturated gas hydrate-bearing sand interval while the correlation of the P-wave attenuation and hydrate saturation is weak for low saturated gas hydrate-bearing shale interval. The results show that P-wave attenuation is more likely to be used as a geophysical proxy for gas hydrate quantification of highly concentrated coarse-grained sediment rather than for that of fine-grained sediment. To examine the P-wave behavior in sand, we use the improved LCAM model, which accounts for physical factors such as grain boundary roughness and squirt flow to explain the observed differences in P-wave attenuation between hydrate and water-saturated coarse-grained sediment. Our results provide further geophysical evidences for P-wave behavior in the gas hydrate-bearing sediments in the field.     

超声无损检测技术在海底沉积物调查中的应用

论文就超声波无损检测技术在海底沉积物声学特性测量上的应用,介绍了其所需的必要设备、样品采集和测量基本原理。探讨了沉积物超声无损测量的资料处理与分析方法及其内容,主要包括声速、声衰减、声阻抗和声速比等声学特性计算;声速与孔隙度、平均粒径和粘土含量等物理力学参数的统计相关性研究。     

Research on the sediment acoustic properties based on a water coupled laboratory measurement system

Abstract

The high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range.     

海底底质声学原位测量电路控制系统研究

介绍了一种液压驱动贯入式海底沉积声学原位测量系统的电路控制单元的研究实现过程,以及该控制单元在南海北部海底沉积声学调查中的应用。该电路控制单元以Cortex-A8处理器为核心,集成大容量FLASH存储器,与单片机接口控制板进行串口通讯,实现对声学发射采集单元和机械液压贯入单元的可视化控制和监测。基于该电路控制单元,海底底质声学原位测量系统兼具自容式和在线式两种工作模式,可自容记录或实时采集声学原位测量单元在海底的工作状态数据、海底沉积物声速和声衰减系数等声学特性数据。该声学原位测量系统的实验室联调及南海海试结果表明,使用该电路控制单元对海底底质声学测量过程的监测与控制是有效的,对精确获取海底底质的原位声学特性有重要作用,可以促进海底底质声学原位测量系统的产品化。     

A rapid assessment method for calculating the drag coefficient in wave attenuation by vegetation

Vegetation in wetlands is a large-scale nature-based resource that can provide multiple benefits to human beings and the environment,such as wave attenuation in coastal zones.Traditionally,there are two main calibration approaches to calculate the attenuation of wave driven by vegetation.The first method is a straightforward one based on the exponential attenuation of wave height in the direction of wave transmission,which,however,overlooks the crucial drag coefficient (C_D).The other method is in accordance with more complicate equations for predicting the damping factor,which is regarded as a function of C_D.In this study,a new relation,combining these above two conventional approaches,is proposed to predict the C_D in an operative approach.Results show that values yielded by the new assessment method perform a strong linear relationship with a collection of historical observations,with a promising R~2 value of 0.90.Besides,the linear regression derives a new predictive equation for the bulk drag coefficient.Additionally,a calibrated value of 4 for the empirical plant drag coefficient(C_P) is revealed.Overall,this new equation,with the superiority of the convenient exponential regression,is expected to be a rapid assessment method for calculating wave attenuation by vegetation and predicting the drag coefficient.     

浅地层剖面资料处理中的地层厚度校正（英文）

浅地层剖面测量是海洋工程勘察、灾害地质调查和大陆架海洋地质科学研究的重要手段,资料解译的准确程度将对地质调查和研究成果的可靠性造成直接影响。由于发收分置型浅地层剖面仪的激发装置与接收装置是分开的,当调查区域的水深过浅时,将其近似为自激自收的单道地震系统会导致地层的畸变,水深越浅地层畸变率越大。根据浅地层剖面仪的基本原理,推导出了浅部地层厚度畸变校正公式,为用C-View软件更准确地解译此类浅地层剖面资料提供了参考。海底沉积物的声速直接影响浅地层剖面地层厚度解译的准确性,利用卢博等建立的适用于中国东南近海的声速经验公式,在某人工岛构造调查中,根据地质钻孔获取的孔隙度参数计算各沉积层的平均声速,建立相应的声速结构剖面,对地层厚度进行校正,取得较好的效果,用孔隙度预测声速的方法参数容易获取,能够提高浅地层剖面资料的解译精度,使地层的厚度更接近于实际,具有一定的实用意义。     

Drag-type in-situ acoustic measurement system: Design,operation, and experimental results

The Drag-type In-Situ Acoustic Measurement System (DISAMS) is a new instrument designed for rapid measurement of seabed sediment acoustic parameters, including the sediment sound velocity and acoustic attenuation coefficient. The DISAMS consists of six independent acoustic probes arranged symmetrically such that each side has one transmitting probe and two receiving probes. The entire operation is controlled and monitored in real time by a deck control unit on board, and the center frequency of the DISAMS is 30?kHz. The DISAMS can record full waveforms to determine the sound velocity and attenuation coefficient in the seabed sediment. In addition to site measurements, the DISAMS can also carry out towing measurements, resulting in improved efficiency compared with existing in-situ acoustic measurement systems. This article presents the configuration, electronics, and tests of the DISAMS in detail. Laboratory tests were conducted in a sediment pool, sea trials were carried out in the Zhoushan Islands, and sound velocity and attenuation coefficient data were obtained. The test results demonstrated that the DISAMS performed well and was able to measure the sound velocity and attenuation coefficient rapidly and accurately in both site measurements and towing measurements.