Operational snow modeling: Addressing the challenges of an energy balance model for National Weather Service forecasts

Prediction of snowmelt has become a critical issue in much of the western United States given the increasing demand for water supply, changing snow cover patterns, and the subsequent requirement of optimal reservoir operation. The increasing importance of hydrologic predictions necessitates that traditional forecasting systems be re-evaluated periodically to assure continued evolution of the operational systems given scientific advancements in hydrology. The National Weather Service (NWS) SNOW17, a conceptually based model used for operational prediction of snowmelt, has been relatively unchanged for decades. In this study, the Snow–Atmosphere–Soil Transfer (SAST) model, which employs the energy balance method, is evaluated against the SNOW17 for the simulation of seasonal snowpack (both accumulation and melt) and basin discharge. We investigate model performance over a 13-year period using data from two basins within the Reynolds Creek Experimental Watershed located in southwestern Idaho. Both models are coupled to the NWS runoff model [SACramento Soil Moisture Accounting model (SACSMA)] to simulate basin streamflow. Results indicate that while in many years simulated snowpack and streamflow are similar between the two modeling systems, the SAST more often overestimates SWE during the spring due to a lack of mid-winter melt in the model. The SAST also had more rapid spring melt rates than the SNOW17, leading to larger errors in the timing and amount of discharge on average. In general, the simpler SNOW17 performed consistently well, and in several years, better than, the SAST model. Input requirements and related uncertainties, and to a lesser extent calibration, are likely to be primary factors affecting the implementation of an energy balance model in operational streamflow prediction.     

Evaluation of snow water equivalent datasets over the Saint‐Maurice river basin region of southern Québec

A 10‐km gridded snow water equivalent (SWE) dataset is developed over the Saint‐Maurice River basin region in southern Québec from kriging of observed snow survey data for evaluation of SWE products. The gridded SWE dataset covers 1980–2014 and is based on manual gravimetric snow surveys carried out on February 1, March 1, March 15, April 1, and April 15 of each snow season, which captures the annual maximum SWE (SWEM) with a mean interpolation error of ±19%. The dataset is used to evaluate SWEM from a range of sources including satellite retrievals, reanalyses, Canadian regional climate models, and the Canadian Meteorological Centre operational snow depth analysis. We also evaluate a number of solid precipitation datasets to determine their contribution to systematic errors in estimated SWEM. None of the evaluated datasets is able to provide estimates of SWEM that are within operational requirements of ±15% error, and insufficient solid precipitation is determined to be one of the main reasons. The Climate System Forecast Reanalysis is the only dataset where snowfall is sufficiently large to generate SWEM values comparable to observations. Inconsistencies in precipitation are also found to have a strong impact on year‐to‐year variability in SWEM dataset performance and spread. Version 3.6.1 of the Canadian Land Surface Scheme land surface scheme driven with ERA‐Interim output downscaled by Version 5.0.1 of the Canadian Regional Climate Model was the best physically based model at explaining the observed spatial and temporal variability in SWEM (root‐mean‐square error [RMSE] = 33%) and has potential for lower error with adjusted precipitation. Operational snow products relying on the real‐time snow depth observing network performed poorly due to a lack of real‐time data and the strong local scale variability of point snow depth observations. The results underscore the need for more effort to be invested in improving solid precipitation estimates for use in snow hydrology applications.     

Long‐term investigations of the snow cover in a subalpine semi‐forested catchment

To improve spring runoff forecasts from subalpine catchments, detailed spatial simulations of the snow cover in this landscape is obligatory. For more than 30 years, the Swiss Federal Research Institute WSL has been conducting extensive snow cover observations in the subalpine watershed Alptal (central Switzerland). This paper summarizes the conclusions from past snow studies in the Alptal valley and presents an analysis of 14 snow courses located at different exposures and altitudes, partly in open areas and partly in forest. The long‐term performance of a physically based numerical snow–vegetation–atmosphere model (COUP) was tested with these snow‐course measurements. One single parameter set with meteorological input variables corrected to the prevailing local conditions resulted in a convincing snow water equivalent (SWE) simulation at most sites and for various winters with a wide range of snow conditions. The snow interception approach used in this study was able to explain the forest effect on the SWE as observed on paired snow courses. Finally, we demonstrated for a meadow and a forest site that a successful simulation of the snowpack yields appropriate melt rates. Copyright © 2006 John Wiley & Sons, Ltd.     

A new method for establishing hydrologic fidelity of snow depth measurements based on snowmelt–runoff hydrographs

For snowmelt-driven flood studies, snow water equivalent (SWE) is frequently estimated using snow depth data. Accurate measurements of snow depth are important in providing data for continuous hydrologic simulations of such watersheds. A new hydrologic fidelity metric is proposed in this study to evaluate the potential contribution of particular snow depth datasets to flow characteristics using observed data and hydrologic modeling using the Variable Infiltration Capacity (VIC) model. Data-based hydrologic fidelity of snow depth measurements is defined as a categorical skill score between the snow depth in the watershed and the hydrograph peak or volume at the watershed outlet. Similarly, model-based hydrologic fidelity is defined as a categorical skill score between the model-simulated snow depth and the model-simulated hydrograph peak or volume. The proposed framework is illustrated using the Pecatonica River watershed in the USA, indicating which sites have a higher hydrologic fidelity, which is preferred in hydrologic studies.     

博斯腾湖流域积雪变化及影响因素

积雪是西北干旱地区河流的主要补给源,是绿洲的生命线.积雪的时空变化是全球变化的区域响应敏感因子之一,同时也是影响西北干旱地区地表水资源变化的主要因子之一.本研究利用MODIS雪盖产品、地表温度、SSM/I雪深、DEM等数据,通过GIS空间分析及地统计分析功能,系统分析了博斯腾湖流域雪盖、雪深的时空变化规律及其与影响因素之间的关系.研究表明,研究区雪深和雪盖多年月平均值从8月份到1月份达到最大值,到7月份降到最低值.但月最大雪深却出现在3月份.雪盖、雪深与地温相关系数分别达到-0.878、-0.853,与分布高程均值相关系数分别达到-0.626和-0.791.雪深最大值受海拔影响有明显的陡坎效应.从12月到8月份随着时间的推移雪的深度在降低,陡坎向高海拔方向移动.9-11月份雪深在加深,陡坎向低海拔方向移动.同一高程段雪深的变幅反应坡向对雪深的影响,变幅越宽坡向影响越大.并且变幅也有先从低海拔到高海拔移动,然后再回到低海拔的特点.本研究对了解该研究区积雪特性的研究有很大作用,可为在该地区开展融雪径流模拟等研究提供重要的参考信息.     

Assimilating snow observations to snow interception process simulations

Snow interception is a crucial hydrological process in cold regions needleleaf forests, but is rarely measured directly. Indirect estimates of snow interception can be made by measuring the difference in the increase in snow accumulation between the forest floor and a nearby clearing over the course of a storm. Pairs of automatic weather stations with acoustic snow depth sensors provide an opportunity to estimate this, if snow density can be estimated reliably. Three approaches for estimating fresh snow density were investigated: weighted post-storm density increments from the physically based Snobal model, fresh snow density estimated empirically from air temperature (Hedstrom, N. R., et al. [1998]. Hydrological Processes, 12, 1611–1625), and fresh snow density estimated empirically from air temperature and wind speed (Jordan, R. E., et al. [1999]. Journal of Geophysical Research, 104, 7785–7806). Automated snow depth observations from adjacent forest and clearing sites and estimated snow densities were used to determine snowstorm snow interception in a subalpine forest in the Canadian Rockies, Alberta, Canada. Then the estimated snow interception and measured interception information from a weighed, suspended tree and a time-lapse camera were assimilated into a model, which was created using the Cold Regions Hydrological Modelling platform (CRHM), using Ensemble Kalman Filter or a simple rule-based direct insertion method. Interception determined using density estimates from the Hedstrom-Pomeroy fresh snow density equation agreed best with observations. Assimilating snow interception information from automatic snow depth measurements improved modelled snow interception timing by 7% and magnitude by 13%, compared to an open loop simulation driven by a numerical weather model; its accuracy was close to that simulated using locally observed meteorological data. Assimilation of tree-measured snow interception improved the snow interception simulation timing and magnitude by 18 and 19%, respectively. Time-lapse camera snow interception information assimilation improved the snow interception simulation timing by 32% and magnitude by 7%. The benefits of assimilation were greatly influenced by assimilation frequency and quality of the forcing data.     

Diagnosing snow accumulation errors in a rain‐snow transitional environment with snow board observations

Diagnosing the source of errors in snow models requires intensive observations, a flexible model framework to test competing hypotheses, and a methodology to systematically test the dominant snow processes. We present a novel process‐based approach to diagnose model errors through an example that focuses on snow accumulation processes (precipitation partitioning, new snow density, and snow compaction). Twelve years of meteorological and snow board measurements were used to identify the main source of model error on each snow accumulation day. Results show that modeled values of new snow density were outside observational uncertainties in 52% of days available for evaluation, while precipitation partitioning and compaction were in error 45% and 16% of the time, respectively. Precipitation partitioning errors mattered more for total winter accumulation during the anomalously warm winter of 2014–2015, when a higher fraction of precipitation fell within the temperature range where partition methods had the largest error. These results demonstrate how isolating individual model processes can identify the primary source(s) of model error, which helps prioritize future research.     

Automatic mapping of snow cover depletion curves using optical remote sensing data under conditions of frequent cloud cover and temporary snow

Snow cover depletion curves are required for several water management applications of snow hydrology and are often difficult to obtain automatically using optical remote sensing data owing to both frequent cloud cover and temporary snow cover. This study develops a methodology to produce accurate snow cover depletion curves automatically using high temporal resolution optical remote sensing data (e.g. Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Aqua MODIS or National Oceanic and Atmospheric Administration (NOAA) Advanced Very High Resolution Radiometer (AVHRR)) by snow cover change trajectory analysis. The method consists of four major steps. The first is to reclassify both cloud‐obscured land and snow into more distinct subclasses and to determine their snow cover status (seasonal snow cover or not) based on the snow cover change trajectories over the whole snowmelt season. The second step is to derive rules based on the analysis of snow cover change trajectories. These rules are subsequently used to determine for a given date, the snow cover status of a pixel based on snow cover maps from the beginning of the snowmelt season to that given date. The third step is to apply a decision‐tree‐like processing flow based on these rules to determine the snow cover status of a pixel for a given date and to create daily seasonal snow cover maps. The final step is to produce snow cover depletion curves using these maps. A case study using this method based on Terra MODIS snow cover map products (MOD10A1) was conducted in the lower and middle reaches of the Kaidu River Watershed (19 000 km²) in the Chinese Tien Shan, Xinjiang Uygur Autonomous Region, China. High resolution remote sensing data (charge coupled device (CCD) camera data with 19·5 m resolution of the China and Brazil Environmental and Resources Satellite (CBERS) data (19·5 m resolution), and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data with 15 m resolution of the Terra) were used to validate the results. The study shows that the seasonal snow cover classification was consistent with that determined using a high spatial resolution dataset, with an accuracy of 87–91%. The snow cover depletion curves clearly reflected the impact of the variation of temperature and the appearance of temporary snow cover on seasonal snow cover. The findings from this case study suggest that the approach is successful in generating accurate snow cover depletion curves automatically under conditions of frequent cloud cover and temporary snow cover using high temporal resolution optical remote sensing data. Copyright © 2007 John Wiley & Sons, Ltd.     

Evaluation of temporal consistency of snow depth drivers of a Rocky Mountain watershed in southern Alberta

Collecting spatially representative data over large areas is a challenge within snow monitoring frameworks. Identifying consistent trends in snow accumulation properties enables increased sampling efficiency by minimizing field collection time and/or remote sensing costs. Seasonal snowpack depth estimations during mid-winter and melt onset conditions were derived from airborne Lidar over the West Castle Watershed in the southern Canadian Rockies on three dates. Each dataset was divided into five sets of snow depth driver classes: elevation, aspect, topographic position index, canopy cover and slope. Datasets were quality controlled by eliminating snow depth values above the 99th percentile value, which had a negligible effect on average snow depths. Consistent trends were observed among driver classes with peak snow accumulation occurring within the treeline ecotone, north-facing aspects, open canopies, topographic depressions and areas with low slope angle. Although mid-winter class trends for each driver were similar and watershed-scale snow depth distributions were significantly correlated (0.76, p < .01), depth distributions within the same driver class of the three datasets were not correlated due to recent snowfall events, redistribution and settling processes. Trends in driver classes during late season melt onset were similar to mid-winter conditions but watershed scale distribution correlation results varied with seasonality (0.68 mid-winter 2014 and melt onset 2016; 0.65 mid-winter 2017 and melt onset 2016, p < .1). This is due to the differing stages of accumulation or ablation and the upward migration in the 0°C isotherm during spring, when snow depth can be declining in valley bottoms while still increasing at higher elevations. The observed consistency in depth driver controls can be used to guide future integrated snow monitoring frameworks.     

Observations of late winter Canadian tundra snow cover properties

Tundra snow cover is important to monitor as it influences local, regional, and global‐scale surface water balance, energy fluxes, as well as ecosystem and permafrost dynamics. Observations are already showing a decrease in spring snow cover duration at high latitudes, but the impact of changing winter season temperature and precipitation on variables such as snow water equivalent (SWE) is less clear. A multi‐year project was initiated in 2004 with the objective to quantify tundra snow cover properties over multiple years at a scale appropriate for comparison with satellite passive microwave remote sensing data and regional climate and hydrological models. Data collected over seven late winter field campaigns (2004 to 2010) show the patterns of snow depth and SWE are strongly influenced by terrain characteristics. Despite the spatial heterogeneity of snow cover, several inter‐annual consistencies were identified. A regional average density of 0.293 g/cm³ was derived and shown to have little difference with individual site densities when deriving SWE from snow depth measurements. The inter‐annual patterns of SWE show that despite variability in meteorological forcing, there were many consistent ratios between the SWE on flat tundra and the SWE on lakes, plateaus, and slopes. A summary of representative inter‐annual snow stratigraphy from different terrain categories is also presented. © 2013 Her Majesty the Queen in Right of Canada. Hydrological Processes. © 2013 John Wiley & Sons, Ltd.     

Information content of snow hydrological signatures based on streamflow,precipitation and air temperature

Hydrological signatures that represent snow processes are valuable to gain insights into snow accumulation and snow melt dynamics. We investigated five snow signatures. Considering inter-annual average of each calendar day, two slopes derived from the relation between streamflow and air temperature for different periods and streamflow peak maxima are used as signatures. In addition, two different approaches are used to compute inter-annual average and yearly snow storage estimates. We evaluated the ability of these signatures to characterize average (a) snow melt dynamics and (b) snow storage. They were applied in 10 Critical Zone Observatory catchments of the Southern Sierra mountains (USA) characterized by a Mediterranean climate. The relevance and information content of the signatures are evaluated using snow depth and snow water equivalent measurements as well as inter-catchment differences in elevation. The slopes quantifying the relations between streamflow and air temperature and the date of streamflow peak were found to characterize snow melt dynamics in terms of snow melt rates and snow melt affected areas. Streamflow peak dates were linked to the period of highest snow melt rates. Snow storage could be estimated both on average, considering all years, and for each year. Snow accumulation dynamics could not be characterized due to the lack of streamflow response during the snow accumulation period. The signatures were found potentially valuable to gain insights into catchment scale snow processes. In particular, when comparing catchments or observed and simulated data, they could provide insights into differences in terms of (a) snow melt rate and/or snow melt affected area over the snow melt season and (b) average or yearly snow storage. Requiring only widely available data, these hydrological signatures can be valuable for snow processes characterization, catchment comparison/classification or model development, calibration or evaluation.     

Estimating snow distribution over a large area and its application for water resources

The spatial and temporal distribution of the snow water equivalent (SWE), snow density and snow depth were estimated by a method combining remote sensing technology and degree‐day techniques over a study area of 370 000 km². The advantages of this simulation model are its simplicity and the availability of degree‐day parameters, which can be successively evaluated by referring to snow area maps created from satellite images. This simulation worked very well for estimating SWE and helped to separate the areas of thin snow cover from heavier snowfall. However, shallow snow in warm regions led to some misjudgments in the snow area maps because of the time lag between when the satellite image was acquired and the simulation itself. Vulnerable areas, where a large variation in the amount of snow affects people's life, could be identified from the differences between heavy and light snow years. This vulnerability stems from a predicted lack of irrigation water for rice production caused by future climate change. The model developed in this study has the potential to contribute to water management activities and decision‐making processes when considering necessary adaptations to future climate change. Copyright © 2007 John Wiley & Sons, Ltd.     

Modelling snow water equivalent and spring runoff in a boreal watershed,James Bay,Canada

The hydrology of boreal regions is strongly influenced by seasonal snow accumulation and melt. In this study, we compare simulations of snow water equivalent (SWE) and streamflow by using the hydrological model HYDROTEL with two contrasting approaches for snow modelling: a mixed degree‐day/energy balance model (small number of inputs, but several calibration parameters needed) and the thermodynamic model CROCUS (large number of inputs, but no calibration parameter needed). The study site, in Northern Quebec, Canada was equipped with a ground‐based gamma ray sensor measuring the SWE continuously for 5 years in a small forest clearing. The first simulation of CROCUS showed a tendency to underestimate SWE, attributable to bias in the meteorological inputs. We found that it was appropriate to use a threshold of 2 °C to separate rain and snow. We also applied a correction to account for snowfall undercatch by the precipitation gauge. After these modifications to the input dataset, we noticed that CROCUS clearly overestimated the SWE, likely as a result of not including loss in SWE because of blowing snow sublimation and relocation. To correct this, we included into CROCUS a simple parameterisation effective after a certain wind speed threshold, after which the thermodynamic model performed much better than the traditional mixed degree‐day/energy balance model. HYDROTEL was then used to simulate streamflow with both snow models. With CROCUS, the main peak flow could be captured, but the second peak because of delayed snowmelt from forested areas could not be reproduced due to a lack of sub‐canopy radiation data to feed CROCUS. Despite the relative homogeneity of the boreal landscape, data inputs from each land cover type are needed to generate satisfying simulation of the spring runoff. Copyright © 2013 John Wiley & Sons, Ltd.     

Comparison and validation of MODIS standard and new combination of Terra and Aqua snow cover products in northern Xinjiang,China

Taking northern Xinjiang, China, as an example, this study first compares the standard MODIS Terra and Aqua snow cover classifications, and then compares the accuracy of the standard MODIS daily and 8‐day snow cover products with the new daily and multi‐day snow cover combination of MODIS Terra and Aqua observations using in situ measurements. Under clear sky in both products, the agreement of land classification from MODIS Terra and Aqua daily and 8‐day snow cover products is close to 100% for a entire water year. In contrast, the agreement of snow classification from MODIS Terra and Aqua is high only in the winter months, decreasing in the rest of the period. The high agreement mainly concentrates in land or snow‐dominated areas, and major disagreements take place in the transitions zones from snow to land. The disagreement (mainly snow–land) in the 8‐day products is higher than that in the daily products. In addition, both MODIS Terra and Aqua cloud masks tend to map more areas in the transition zones as cloud. Under clear sky conditions, the three daily products have similar accuracy of snow and land classification, and the 8‐day standard products and the multi‐day combination product also have similar accuracy of snow and land classification. This further suggests that the algorithm in the combination of Terra and Aqua snow cover products is valid. Moreover, in the actual weather/cloud conditions, the combination products from Terra and Aqua reduce cloud blockage and improve snow classification accuracy against either MODIS Terra or Aqua (51% against 44% and 34% for daily and 92% against 87% and 78% for 8‐day, respectively), although Terra snow product (daily or 8‐day) has slightly better accuracy than the Aqua snow product. The new combination products can provide better mapping of spatiotemporal variation of snow cover/glacier and for snow‐melting modeling. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of a distributed blowing snow model to the Arctic

Transportation, sublimation and accumulation of snow dominate snow cover development in the Arctic and produce episodic high evaporative fluxes. Unfortunately, blowing snow processes are not presently incorporated in any hydrological or meteorological models. To demonstrate the application of simple algorithms that represent blowing snow processes, monthly snow accumulation, relocation and sublimation fluxes were calculated and applied in a spatially distributed manner to a 68-km² catchment in the low Arctic of north-western Canada. The model uses a Landsat-derived vegetation classification and a digital elevation model to segregate the basin into snow ‘sources’ and ‘sinks’. The model then relocates snow from sources to sinks and calculates in-transit sublimation loss. The resulting annual snow accumulation in specific landscape types was compared with the result of intensive surveys of snow depth and density. On an annual basis, 28% of annual snowfall sublimated from tundra surfaces whilst 18% was transported to sink areas. Annual blowing snow transport to sink areas amounted to an additional 16% of annual snowfall to shrub–tundra and an additional 182% to drifts. For the catchment, 19·5% of annual snowfall sublimated from blowing snow, 5·8% was transported into the catchment and 86·5% accumulated on the ground. The model overestimated snow accumulation in the catchment by 6%. The application demonstrates that winter precipitation alone is insufficient to calculate snow accumulation and that blowing snow processes and landscape patterns govern the spatial distribution and total accumulation of snow water equivalent over the winter. These processes can be modelled by relatively simple algorithms, and, when distributed by landscape type over the catchment, produce reasonable estimates of snow accumulation and loss in wind-swept regions. © 1997 John Wiley & Sons, Ltd.     

Incorporating accumulated temperature and algorithm of snow cover calculation into the snowmelt runoff model

An accurate simulation of snowmelt runoff is of much importance in arid alpine regions. Data availability is usually an obstacle to use energy‐based snowmelt models for the snowmelt runoff simulation, and temperature‐based snowmelt models are more appealing in these regions. The snow runoff model is very popular nowadays, especially in the data sparse regions, because only temperature, precipitation and snow cover data are required for inputs to the model. However, this model uses average temperature as index, which cannot reflect the snowmelt simulation in the high altitude band. In this study, the snow runoff model is modified on the basis of accumulated active temperature. Snow cover calculation algorithm is added and is no longer needed as input but output. This makes the model able to simulate long‐time runoff and long‐time snow cover variation in every band. An examination of the improved model in the Manas River basin showed that the model is effective. It can reproduce the behaviour of the hydrology and can reflect the actual snow cover fluctuation. Copyright © 2012 John Wiley & Sons, Ltd.     

Evaluation of spatial variability in snow water equivalent for a high mountain catchment

Multivariate statistical analysis was used to explore relationships between catchment topography and spatial variability in snow accumulation and melt processes in a small headwater catchment in the Spanish Pyrenees. Manual surveys of snow depth and density provided information on the spatial distribution of snow water equivalent (SWE) and its depletion over the course of the 1997 and 1998 melt seasons. A number of indices expressing the topographic control on snow processes were extracted from a detailed digital elevation model of the catchment. Bivariate screening was used to assess the relative importance of these topographic indices in controlling snow accumulation at the start of the melt season, average melt rates and the timing of snow disappearance. This suggested that topographic controls on the redistribution of snow by wind are the most important influence on snow distribution at the start of the melt season. Furthermore, it appeared that spatial patterns of snow disappearance were largely determined by the distribution of snow water equivalent (SWE) at the start of the melt season, rather than by spatial variability in melt rates during the melt season. Binary regression tree models relating snow depth and disappearance date to terrain indices were then constructed. These explained 70–80% of the variance in the observed data. As well as providing insights into the influence of topography on snow processes, it is suggested that the techniques presented herein could be used in the parameterization of distributed snowmelt models, or in the design of efficient stratified snow surveys. Copyright © 2003 John Wiley & Sons, Ltd.     

雪冰中黑碳的测试分析方法综述

储存在雪冰介质中的黑碳是了解古气候、古环境的变化以及人类活动历史的重要工具．然而，雪冰中黑碳信息的准确提取却不同于一般的常规离子，在测试分析的每个环节（样品采集，预处理，精确测定）都需要特别处理．本文就上个世纪80年代雪冰黑碳开始研究以来已有的测试分析方法进行了综述．     

Routing of canopy drip in the snowpack below a spruce crown

Snow that is retained by a forest canopy may either sublimate or evaporate directly from the crown or drop as snow clumps or meltwater to the ground. Redistributed snow and meltwater affect the snow structure and prevent the formation of mechanically weak layers, which is the prerequisite for avalanche formation in forests. In this paper we describe the results of dye tracer experiments conducted in a subalpine forest near Davos, Switzerland. Before a snowfall event we stained snow‐free branches of a spruce with a dye tracer solution. After snowfall the coloured meltwater dripping from the branches down on to the snowpack stained the percolation pathways of the meltwater in the snowpack. Photographs of the snow profiles indicate that the meltwater seeped almost vertically through the isothermal snowpack to the soil surface not exceeding the projected crown edge. Meltwater of different events moves along different preferential flow channels in the snow suggesting that old channels are not non‐conducting and additional meltwater fronts create new channels. Copyright © 1999 John Wiley & Sons, Ltd.     

Dynamics of snow ablation in a small Alpine catchment observed by repeated terrestrial laser scans

The spatio‐temporal distribution of snow in a catchment during ablation reflects changes in the total amount of snow water equivalent and is thus a key parameter for the estimation of melt water run‐off. This study explores possible rules behind the spatial variability of snow depth during the ablation season in a small Alpine catchment with complex topography. The snow depth observations are based on more than 160 000 terrestrial laser scanner data points with a spatial resolution of 1 m, which were obtained from 11 scanning campaigns of two consecutive ablation seasons. The analysis suggests that for estimating cumulative snow melt dynamics from the catchment investigated, assessing the initial snow distribution prior to the melt season is more important than addressing spatial differences in the melt behaviour. Snow volume and snow‐covered area could be predicted well using a conceptual melt model assuming spatially uniform melt rates. However, accurate results were only obtained if the model was initialized with a pre‐melt snow distribution that reflected measured mean and standard deviation. Using stratified melt rates on the other hand did not improve the model results. At least for sites with similar meteorological and topographical conditions, the model approach presented here comprises an efficient way to estimate snow depletion dynamics, especially if persistent snow accumulation pattern between years facilitate the characterization of the initial snow distribution prior to the melt. Copyright © 2011 John Wiley & Sons, Ltd.