SPATIAL AND SEASONAL VARIABILITY IN THE COMPONENTS OF THE RIVER HEAT BUDGET

Detailed hydrometeorological measurements have been used to establish the components of the river heat budget for 495 days covering 18 study periods and 11 study reaches in the Exe Basin, Devon, UK. Averaging the results across the whole data-set indicates that net radiation, friction, sensible heat transfer, condensation and bed conduction contributed 56.0, 22.2, 13.2, 5.8 and 2.8%, respectively, to the non-advective energy gains, whereas net radiation, evaporation, sensible heat exchange and bed conduction accounted for 48.6, 30.4, 10.6 and 10.4%, respectively, of the non-advective heat losses. Precipitation falling on the river channel had little impact on the river heat budgets, but energy advected in groundwater accounted for an average 5% of the heat storage in the river. The magnitude and importance of the river heat budget components were found to be variable in space and time. The influence of channel morphology, valley topography, riparian vegetation, substratum nature and hydrological conditions, especially the effects of river regulation, promoted inter-reach variability in the make up of the heat budget and caused significant differences in energy fluxes at a local scale. Heat budget components also exhibited considerable differences between seasons and varied from day to day for individual reaches. © 1997 by John Wiley & Sons, Ltd.     

Energy balance and evaporation loss of an agricultural reservoir in a semi‐arid climate (south‐eastern Spain)

A typical agricultural water reservoir (AWR) of 2400 m² area and 5 m depth, located in a semi‐arid area (southern Spain), was surveyed on a daily basis for 1 year. The annual evaporation flux was 102·7 W m^?2, equivalent to an evaporated water depth of 1310 mm year^?1. The heat storage rate G exhibited a clear annual cycle with a peak gain in April (G ～ 45 W m^?2) and a peak loss in November (G ～ 40 W m^?2), leading to a marked annual hysteretic trend when evaporation (λE) was related to net radiation (R_n). λE was strongly correlated with the available energy A, representing 91% of the annual AWR energy loss. The sensible heat flux H accounted for the remaining 9%, leading to an annual Bowen ratio in the order of 0·10. The equilibrium and advective evaporation terms of the Penman formula represented 76 and 24%, respectively, of the total evaporation, corresponding to a annual value of the Priestley–Taylor (P–T) coefficient (α) of 1·32. The P–T coefficient presented a clear seasonal pattern, with a minimum of 1·23 (July) and a maximum of 1·65 (December), indicating that, during periods of limited available energy, AWR evaporation increased above the potential evaporation as a result of the advection process. Overall, the results stressed that accurate prediction of monthly evaporation by means of the P–T formula requires accounting for both the annual cycle of storage and the advective component. Some alternative approaches to estimating R_n, G and α are proposed and discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaporation and energy balance of a sub‐Arctic hillslope in northern Finland

This paper presents measurements of the energy balance (radiation, sensible heat flux, evaporation) from a sub‐arctic hillside in northern Finland for a summer season. Comparisons are also made with a nearby wetland site. The hillslope measurements show an equal partition of the radiant energy into sensible and latent heat flux. The evaporative ratio of just over one half was remarkably constant throughout the season, despite very large day‐to‐day and diurnal variations of temperature, humidity deficit and radiation input. This conservative behaviour of the evaporation was caused by a strong rise in effective surface resistance to evaporation with increasing vapour pressure deficit. This suggests a strong physiological control on the evaporation, with stomata closing at times of high evaporative demand. There was no obvious impact of soil‐water stress on the evaporation. However, a comparison with the evaporation measured at a nearby mire site in 1997 suggests that the mire has a significantly lower surface resistance, even when the impact of a significantly lower humidity deficit in the earlier year is taken into account. The measurements are used to test, off‐line, the performance of MOSES (Meteorological Office Surface Exchange Scheme), a simple, but comprehensive, land surface model. The sensitivity of the energy exchanges to the thermal properties of the top soil layer (a surrogate for the upper soil/vegetation layer) is investigated with the use of the model. It is found that the evaporation is insensitive to these properties; they do, however, influence the partition of energy between the sensible heat flux and the ground heat flux (and hence the soil temperatures). It is suggested that the model needs to represent the thermal properties of the canopy more realistically. Copyright © 2002 John Wiley & Sons, Ltd.     

Seasonal variation in the energy and water exchanges above and below a larch forest in eastern Siberia

The water and energy exchanges in forests form one of the most important hydro‐meteorological systems. There have been far fewer investigations of the water and heat exchange in high latitude forests than of those in warm, humid regions. There have been few observations of this system in Siberia for an entire growing season, including the snowmelt and leaf‐fall seasons. In this study, the characteristics of the energy and water budgets in an eastern Siberian larch forest were investigated from the snowmelt season to the leaf‐fall season. The latent heat flux was strongly affected by the transpiration activity of the larch trees and increased quickly as the larch stand began to foliate. The sensible heat dropped at that time, although the net all‐wave radiation increased. Consequently, the seasonal variation in the Bowen ratio was clearly ‘U’‐shaped, and the minimum value (1·0) occurred in June and July. The Bowen ratio was very high (10–25) in early spring, just before leaf opening. The canopy resistance for a big leaf model far exceeded the aerodynamic resistance and fluctuated over a much wider range. The canopy resistance was strongly restricted by the saturation deficit, and its minimum value was 100 s m^?1 (10 mm s^?1 in conductance). This minimum canopy resistance is higher than values obtained for forests in warm, humid regions, but is similar to those measured in other boreal conifer forests. It has been suggested that the senescence of leaves also affects the canopy resistance, which was higher in the leaf‐fall season than in the foliated season. The mean evapotranspiration rate from 21 April 1998 to 7 September 1998 was 1·16 mm day^?1, and the maximum rate, 2·9 mm day^?1, occurred at the beginning of July. For the growing season from 1 June to 31 August, this rate was 1·5 mm day^?1. The total evapotranspiration from the forest (151 mm) exceeded the amount of precipitation (106 mm) and was equal to 73% of the total water input (211 mm), including the snow water equivalent. The understory evapotranspiration reached 35% of the total evapotranspiration, and the interception evaporation was 15% of the gross precipitation. The understory evapotranspiration was high and the interception evaporation was low because the canopy was sparse and the leaf area index was low. Copyright © 2001 John Wiley & Sons, Ltd.     

Data collection methodology for dynamic temperature model testing and corroboration

This article describes a data collection approach for determining the significance of individual heat fluxes within streams with an emphasis on testing (i.e. identification of possible missing heat fluxes), development, calibration and corroboration of a dynamic temperature model. The basis for developing this approach was a preliminary temperature modelling effort on the Virgin River in southwestern Utah during a low‐flow period that suggested important components of the energy balance might be missing in the original standard surface‐flux temperature model. Possible missing heat fluxes were identified as bed conduction, hyporheic exchange, dead zone warming and exchange and poor representation of the amount of solar radiation entering the water column. To identify and estimate the relative importance of the missing components, a comprehensive data collection effort was developed and implemented. In particular, a method for measuring shortwave radiation behaviour in the water column and an in situ method for separating out bed conduction and hyporheic influences were established. The resulting data and subsequent modelling effort indicate that hyporheic and dead zone heat fluxes are important, whereas solar radiation reflection at the water surface was found to be insignificant. Although bed conduction can be significant in certain rivers, it was found to have little effect on the overall heat budget for this section of the Virgin River. Copyright © 2009 John Wiley & Sons, Ltd.     

Above‐stream microclimate and stream surface energy exchanges in a wildfire‐disturbed riparian zone

Stream temperature and riparian microclimate were characterized for a 1·5 km wildfire‐disturbed reach of Fishtrap Creek, located north of Kamloops, British Columbia. A deterministic net radiation model was developed using hemispherical canopy images coupled with on‐site microclimate measurements. Modelled net radiation agreed reasonably with measured net radiation. Air temperature and humidity measured at two locations above the stream, separated by 900 m, were generally similar, whereas wind speed was poorly correlated between the two sites. Modelled net radiation varied considerably along the reach, and measurements at a single location did not provide a reliable estimate of the modelled reach average. During summer, net radiation dominated the surface heat exchanges, particularly because the sensible and latent heat fluxes were normally of opposite sign and thus tended to cancel each other. All surface heat fluxes shifted to negative values in autumn and were of similar magnitude through winter. In March, net radiation became positive, but heat gains were cancelled by sensible and latent heat fluxes, which remained negative. A modelling exercise using three canopy cover scenarios (current, simulated pre‐wildfire and simulated complete vegetation removal) showed that net radiation under the standing dead trees was double that modelled for the pre‐fire canopy cover. However, post‐disturbance standing dead trees reduce daytime net radiation reaching the stream surface by one‐third compared with complete vegetation removal. The results of this study have highlighted the need to account for reach‐scale spatial variability of energy exchange processes, especially net radiation, when modelling stream energy budgets. Copyright © 2010 John Wiley & Sons, Ltd.     

Energy balance above a boreal coniferous forest: a difference in turbulent fluxes between snow‐covered and snow‐free canopies

To evaluate the interactive effects of snow and forest on turbulent fluxes between the forest surface and the atmosphere, the surface energy balance above a forest was measured by the eddy correlation method during the winter of 1995–1996. The forest was a young coniferous plantation comprised of spruce and fir. The study site, in Sapporo, northern Japan, had heavy and frequent snowfalls and the canopy was frequently covered with snow during the study period. A comparison of the observed energy balance above the forest for periods with and without a snow‐covered canopy and an analysis using a single‐source model gave the following results: during daytime when the canopy was covered with snow, the upward latent heat flux was large, about 80% of the net radiation, and the sensible heat flux was positive but small. On the other hand, during daytime when the canopy was dry and free from snow, the sensible heat flux was dominant and the latent heat flux was minor, about 10% of the net radiation. To explain this difference of energy partition between snow‐covered and snow‐free conditions, not only differences in temperature but also differences in the bulk transfer coefficients for latent heat flux were necessary in the model. Therefore, the high evaporation rate from the snow‐covered canopy can be attributed largely to the high moisture availability of the canopy surface. Evaporation from the forest during a 60‐day period in midwinter was estimated on a daily basis as net radiation minus sensible heat flux. The overall average evaporation during the 60‐day period was 0·6 mm day⁻¹, which is larger than that from open snow fields. Copyright © 1999 John Wiley & Sons, Ltd.     

Long‐wave radiation and heat flux estimates within a small tributary in Catamaran Brook (New Brunswick,Canada)

River water temperature is an important water quality parameter that also influences most aquatic life. Physical processes influencing water temperature in rivers are highly complex. This is especially true for the estimation of river heat exchange processes that are highly dependent on good estimates of radiation fluxes. Furthermore, very few studies were found within the stream temperature dynamic literature where the different radiation components have been measured and compared at the stream level (at microclimate conditions). Therefore, this study presents results on hydrometeorological conditions for a small tributary within Catamaran Brook (part of the Miramichi River system, New Brunswick, Canada) with the following specific objectives: (1) to compare between stream microclimate and remote meteorological conditions, (2) to compare measured long‐wave radiation data with those calculated from an analytical model, and (3), to calculate the corresponding river heat fluxes. The most salient findings of this study are (1) solar radiation and wind speed are parameters that are highly site specific within the river environment and play an important role in the estimation of river heat fluxes; (2) the incoming, outgoing, and net long‐wave radiation within the stream environment (under the forest canopy) can be effectively calculated using empirical formula; (3) at the study site more than 80% of the incoming long‐wave radiation was coming from the forest; (4) total energy gains were dominated by solar radiation flux (for all the study periods) followed by the net long‐wave radiation (during some periods) whereas energy losses were coming from both the net long‐wave radiation and evaporation. Conductive heat fluxes have a minor contribution from the overall heat budget (<3·5%); (5) the reflected short‐wave radiation at the water surface was calculated on average as 3·2%, which is consistent with literature values. Results of this study contribute towards a better understanding of river heat fluxes and water temperature models as well as for more effective aquatic resources and fisheries management. Copyright © 2011 John Wiley & Sons, Ltd.     

Heat exchange processes and thermal dynamics of a glacier‐fed alpine stream

Glacier‐fed river thermal regimes vary markedly in space and time; however, knowledge is limited on the fundamental processes controlling alpine stream temperature dynamics. To address the research gap, this study quantified heat exchanges at the water surface and bed of the Taillon glacier‐fed stream, French Pyrénées. Hydro‐meteorological observations were recorded at 15‐min intervals across two summer melt seasons (2010 and 2011), and energy balance components were measured or estimated based on site‐specific data. Averaged over both seasons, net radiation was the largest heat source (~80% of total flux); sensible heat (~13%) and friction (~3%) were also sources, while heat exchange across the channel–streambed interface was negligible (<1%). Latent heat displayed distinct interannual variability and contributed 5% in 2010 compared with 0.03% in 2011. At the sub‐seasonal scale, latent heat shifted from source to sink, possibly linked to the retreating valley snowline that changed temperature and humidity gradients. These findings represent the first, multiyear study of the heat exchange processes operating in a glacier‐fed stream, providing fundamental process understanding; the research highlights the direct control antecedent (winter) conditions that have on energy exchange and stream temperature during summer months. In particular, the timing and volume of snowfall/snowmelt can drive thermal dynamics by the following: (1) altering the length of the stream network exposed to the atmosphere and (2) controlling the volume and timing of cold water advection downstream. Finally, this study highlights the need to develop long‐term hydro‐meteorological monitoring stations to improve the understanding of these highly dynamic, climatically sensitive systems. Copyright © 2015 John Wiley & Sons, Ltd.     

Alluvial architecture in headwater streams with special emphasis on step–pool topography

Alluvial mountain streams exhibit a range of channel forms: pool–riffle, plane bed, step–pool and cascades. Previous work suggested that these forms exist within discrete, and progressively steeper slope classes. Measurements conducted at over 100 sites in west‐central and central Idaho confirm that slope steepens progressively as one moves from pool–riffle, to plane bed, to step–pool, and finally to cascades. Median slope for pool–riffle topography is 0·0060, for plane beds 0·013, for step–pools 0·044, and for cascades 0·068. There is substantial overlap in the slopes associated with these channel forms. Pool–riffle topography was found at slopes between 0·0010 and 0·015, plane beds between 0·0010 and 0·035, step–pools between 0·015 and 0·134, and cascades between 0·050 and 0·12. Step–pools are particularly striking features in headwater streams. They are characterized by alternating steep and gentle channel segments. The steep segments (step risers) are transverse accumulations of boulder and cobbles, while the gentle segments (pools) contain finer material. Step wavelength is best correlated to step height which is in turn best correlated to the median particle size found on step risers. This result differs from past studies that have reported channel slope to be the dominant control on step wavelength. The presumed geometry and Froude number associated with the features under formative conditions are consistent with the existence field for antidunes and by extension with the hypothesis that step–pools are formed by antidunes. Copyright © 2000 John Wiley & Sons, Ltd.     

Response of water and energy exchange to the environmental variable in a desert‐oasis wetland of Northwest China

A case study on a desert‐oasis wetland ecosystem in the arid region of Northwest China measured the seasonal and interannual variation in energy partitioning and evapotranspiration to analyse the response of water and energy exchange on soil moisture, groundwater, and environmental variables. Energy partitioning showed a clear seasonal and interannual variability, and the process of water and energy exchange differed significantly in the monthly and interannual scales. The net radiation was 7.31 MJ m^?2· day^?1, and sensible heat flux accounted for 50.42% of net radiation in energy fluxes, 40.56% for latent heat flux, and 9.02% for ground heat flux. The parameters in energy fluxes were best described by a unimodal curve, whereas sensible heat flux followed a bimodal curve. Variations in the daily evapotranspiration and crop evapotranspiration also exhibited a single peak curve with annual values of 569.84 and 644.47 mm, respectively. Canopy conductance averaged 20.77 ± 13.75 mm s^?1 and varied from 0.16 to 83.96 mm s^?1 during the two hydrological years. The variation in water and energy exchange reflected environmental conditions and depended primarily on vapour pressure deficit, net radiation, soil moisture, and water depth. Although the effects of precipitation on evapotranspiration showed that the response of this ecosystem to climate changes was not obvious, the variation of air temperatures had a strong influence on evapotranspiration, resulting in a significant increase in evapotranspiration (R = 0.730; P < 0.01). Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal regime of a headwater stream within a clear‐cut,coastal British Columbia,Canada

This study examined the thermal regime of a headwater stream within a clear‐cut. The stream had a complex morphology dominated by step–pool features, many formed by sediment accumulation upstream of woody debris. Maximum daily temperatures increased up to 5 °C after logging, and were positively associated with maximum daily air temperature and negatively with discharge. Maximum daily temperatures generally increased with downstream distance through the cut block, but decreased with distance in two segments over distances of tens of metres, where the topography indicated relatively concentrated lateral inflow. Localized cool areas within a step–pool unit were associated with zones of concentrated upwelling. Bed temperatures tended to be higher and have greater ranges in areas of downwelling flow into the bed. Heat budget estimates were made using meteorological measurements over the water surface and a model of net radiation using canopy characteristics derived from fisheye photography. Heat exchange driven by hyporheic flow through the channel step was a cooling effect during daytime, with a magnitude up to approximately 25% that of net radiation during the period of maximum daytime warming. Heat budget calculations in these headwater streams are complicated by the heterogeneity of incident solar radiation and channel geometry, as well as uncertainty in estimating heat and water exchanges between the stream and the subsurface via hyporheic exchange and heat conduction. Copyright © 2005 John Wiley & Sons, Ltd.     

Evaporation and the subcanopy energy environment in a flooded forest

The combination of tree canopy cover and a free water surface makes the subcanopy environment of flooded forested wetlands unlike other aquatic or terrestrial systems. Subcanopy vapour fluxes and energy budgets represent key controls on water level and understorey climate but are not well understood. In a permanently flooded forest in south‐eastern Louisiana, USA, an energy balance approach was used to address (a) whether evaporation from floodwater under a forest canopy is solely energy limited and (b) how energy availability was modulated by radiation and changes in floodwater heat storage. A 5‐month continuous measurement period (June–November) was used to sample across seasonal changes in canopy activity and temperature regimes. Over this period, the subcanopy airspace was humid, maintaining saturation vapour pressure for 28% of the total record. High humidity coupled with the thermal inertia of surface water altered both seasonal and diel energy exchanges, including atypical phenomena such as frequent day‐time vapour pressure gradients towards the water surface. Throughout the study period, nearly all available energy was partitioned to evaporation, with minimal sensible heat exchange. Monthly mean evaporation ranged from 0.7 to 1.7 mm/day, peaking in fall when canopy senescence allowed greater radiation transmission; contemporaneous seasonal temperature shifts and a net release of stored heat from the surface water resulted in energy availability exceeding net radiation by 30% in October and November. Relatively stable energy partitioning matches Priestley–Taylor assumptions for a general model of evaporation in this ecosystem.     

Estimation of spatially distributed surface energy fluxes using remotely‐sensed data for agricultural fields

Land surface energy fluxes are required in many environmental studies, including hydrology, agronomy and meteorology. Surface energy balance models simulate microscale energy exchange processes between the ground surface and the atmospheric layer near ground level. Spatial variability of energy fluxes limits point measurements to be used for larger areas. Remote sensing provides the basis for spatial mapping of energy fluxes. Remote‐sensing‐based surface energy flux‐mapping was conducted using seven Landsat images from 1997 to 2002 at four contiguous crop fields located in Polk County, northwestern Minnesota. Spatially distributed surface energy fluxes were estimated and mapped at 30 m pixel level from Landsat Thematic Mapper and Enhanced Thematic Mapper images and weather information. Net radiation was determined using the surface energy balance algorithm for land (SEBAL) procedure. Applying the two‐source energy balance (TSEB) model, the surface temperature and the latent and sensible heat fluxes were partitioned into vegetation and soil components and estimated at the pixel level. Yield data for wheat and soybean from 1997 to 2002 were mapped and compared with latent heat (evapotranspiration) for four of the fields at pixel level. The spatial distribution and the relation of latent heat flux and Bowen ratio (ratio of sensible heat to latent heat) to crop yield were studied. The root‐mean‐square error and the mean absolute percentage of error between the observed and predicted energy fluxes were between 7 and 22 W m⁻² and 12 and 24% respectively. Results show that latent heat flux and Bowen ratio were correlated (positive and negative) to the yield data. Wheat and soybean yields were predicted using latent heat flux with mean R² = 0·67 and 0·70 respectively, average residual means of −4·2 bushels/acre and 0·11 bushels/acre respectively, and average residual standard deviations of 16·2 bushels/acre and 16·6 bushels/acre respectively (1 bushel/acre ≈ 0·087 m³ ha⁻¹). The flux estimation procedure from the SEBAL‐TSEB model was useful and applicable to agricultural fields. Copyright © 2005 John Wiley & Sons, Ltd.     

Recent increase of river–floodplain suspended sediment exchange in a reach of the lower Amazon River

We analyzed variation of channel–floodplain suspended sediment exchange along a 140 km reach of the lower Amazon River for two decades (1995–2014). Daily sediment fluxes were determined by combining measured and estimated surface sediment concentrations with river–floodplain water exchanges computed with a two‐dimensional hydraulic model. The average annual inflow to the floodplain was 4088 ± 2017 Gg yr^?1 and the outflow was 2251 ± 471 Gg yr^?1, respectively. Prediction of average sediment accretion rate was twice the estimate from a previous study of this same reach and more than an order of magnitude lower than an estimate from an earlier regional scale study. The amount of water routed through the floodplain, which is sensitive to levee topography and increases exponentially with river discharge, was the main factor controlling the variation in total annual sediment inflow. Besides floodplain routing, the total annual sediment export depended on the increase in sediment concentration in lakes during floodplain drainage. The recent increasing amplitude of the Amazon River annual flood over two decades has caused a substantial shift in water and sediment river–floodplain exchanges. In the second decade (2005–2014), as the frequency of extreme floods increased, annual sediment inflow increased by 81% and net storage increased by 317% in relation to the previous decade (1995–2004). Copyright © 2017 John Wiley & Sons, Ltd.     

In situ quantification of spatial and temporal variability of hyporheic exchange in static and mobile gravel‐bed rivers

Seepage meters modified for use in flowing water were used to directly measure rates of exchange between surface and subsurface water in a gravel‐ and cobble bed river in western Pennsylvania, USA (Allegheny River, Q_mean = 190 m³/s) and a sand‐ and gravel‐bed river in Colorado, USA (South Platte River, Q_mean = 9·7 m³/s). Study reaches at the Allegheny River were located downstream from a dam. The bed was stable with moss, algae, and river grass present in many locations. Median seepage was + 0·28 m/d and seepage was highly variable among measurement locations. Upward and downward seepage greatly exceeded the median seepage rate, ranging from + 2·26 (upward) to ? 3·76 (downward) m/d. At the South Platte River site, substantial local‐scale bed topography as well as mobile bedforms resulted in spatial and temporal variability in seepage greatly in exceedence of the median groundwater discharge rate of 0·24 m/d. Both upward and downward seepage were recorded along every transect across the river with rates ranging from + 2·37 to ? 3·40 m/d. Despite a stable bed, which commonly facilitates clogging by fine‐grained or organic sediments, seepage rates at the Allegheny River were not reduced relative to those at the South Platte River. Seepage rate and direction depended primarily on measurement position relative to local‐ and meso‐scale bed topography at both rivers. Hydraulic gradients were small at nearly all seepage‐measurement locations and commonly were not a good indicator of seepage rate or direction. Therefore, measuring hydraulic gradient and hydraulic conductivity at in‐stream piezometers may be misleading if used to determine seepage flux across the sediment‐water interface. Such a method assumes that flow between the well screen and sediment‐water interface is vertical, which appears to be a poor assumption in coarse‐grained hyporheic settings. Copyright © 2011 John Wiley & Sons, Ltd.     

An experimental test of whether bar instability contributes to the formation,periodicity and maintenance of pool–riffle sequences

Pool–riffle sequences (PRSs) are periodic river‐bed morphologies with wavelengths several times the channel width. Causes of PRS formation and maintenance are not clearly understood, which may limit the effectiveness of protection and rehabilitation measures. Some confusion has existed about whether the PRS morphology is the same as or distinct from alternate bars. In this paper we investigate whether the bar instability forming alternate bars also contributes to PRS formation, periodicity and maintenance. This was unclear because bar instability occurs only when the ratio of channel width/depth exceeds a critical value, generally understood to be approximately 10, which is larger than the width‐to‐depth ratio of many PRSs. A mobile‐bed physical model is used to test whether bar instability occurs in channels characteristic of PRS morphology, with low width‐to‐depth ratio, and high relative roughness. The physical model was scaled from a prototype PRS in a gravel and cobble bed river. Alternate bars formed in the model at channel width‐to‐depth ratios as low as 3·8. The wavelength of the alternate bars formed was generally 2·2–5 times channel width, which was similar to the prototype PRS. Therefore, bar instability can occur in virtually all PRSs, and it contributes to the widespread formation of periodic PRS morphology. The model showed that maintenance of the bar height in the prototype PRS also depends on variations in channel width. It is concluded that periodic PRSs are formed and maintained by the interaction between bar instability, and flow deflections associated with variations in channel geometry such as width variation. Resonance between bar instability and three‐dimensional bed forms such as alternate bars and variations in channel geometry. Variations in channel geometry are also important in determining the location and dimensions of individual pools and bars. Copyright © 2008 John Wiley & Sons, Ltd.     

The spatial and temporal patterns of aggradation in a temperate,upland, gravel‐bed river

Intensive field monitoring of a reach of upland gravel‐bed river illustrates the temporal and spatial variability of in‐channel sedimentation. Over the six‐year monitoring period, the mean bed level in the channel has risen by 0·17 m with a maximum bed level rise of 0·5 m noted at one location over a five month winter period. These rapid levels of aggradation have a profound impact on the number and duration of overbank flows with flood frequency increasing on average 2·6 times and overbank flow time increasing by 12·8 hours. This work raises the profile of coarse sediment transfer in the design and operation of river management, specifically engineering schemes. It emphasizes the need for the implementation of strategic monitoring programmes before engineering work occurs to identify zones where aggradation is likely to be problematic. Exploration of the sediment supply and transfer system can explain patterns of channel sedimentation. The complex spatial, seasonal and annual variability in sediment supply and transfer raise uncertainties into the system's response to potential changes in climate and land‐use. Thus, there is a demand for schemes that monitor coarse sediment transfer and channel response. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessment of hydrodynamic simulation results for eco‐hydraulic and eco‐hydrological applications: a spatial semivariance approach

Output from a three‐dimensional numerical flow model (SSIIM) is used in conjunction with high‐resolution topographic and velocity data to assess such models for eco‐hydraulic applications in river channel design and habitat appraisal. A new methodology for the comparison between field measurement and model output is detailed. This involves a comparison between conventional goodness‐of‐fit approaches applied to a spatially structured (riffle and pool) sample of model and field data, and a ‘relaxation’ method based upon the spatial semivariance of model/field departures. Conventional assessment indicates that the model predicts point‐by‐point velocity characteristics on a 0·45 m mesh to within ±0·1 m s⁻¹ over 80% of the channel area at low flow, and 50% of the area at high in‐bank flow. When a relative criterion of model fit is used, however, the model appears to perform less well: 60–70% of channel area has predicted velocities that depart from observed velocities by more than 10%. Regression analysis of observed and predicted velocities gives more cause for optimism, but all of these conventional indicators of goodness of fit neglect important spatial characteristics of model performance. Spatial semivariance is a means of supplementing model appraisal in this respect. In particular, using the relaxation approach, results are greatly improved: at a high in‐bank flow, the model results match field measurements to within 0·1 m s⁻¹ for more than 95% of the total channel area, provided that model and field comparisons are allowed within a radius of approximately 1 m from the original point of measurement. It is suggested that this revised form of model assessment is of particular relevance to eco‐hydraulic applications, where some degree of spatial and temporal dynamism (or uncertainty) is a characteristic. The approach may also be generalized to other environmental science modelling applications where the spatial attributes of model fits are of interest. Copyright © 2005 John Wiley & Sons, Ltd.     

Photogrammetric monitoring of small streams under a riparian forest canopy

The recent advent of digital photogrammetry has enabled the modeling and monitoring of river beds at relatively high spatial resolution (0·01 to 1 m) through the extraction of digital elevation models (DEMs). The traditional approach to image capture has been to mount a metric camera to an aircraft, although non‐metric cameras have been mounted to a variety of novel aerial platforms to acquire river‐based imagery (e.g. helicopters, radio‐controlled motorized vehicles, tethered blimps and balloons). However, most of these techniques are designed to acquire imagery at flying heights above the riparian tree canopy. In relatively narrow channels (e.g. <20 m bankfull width), streamside trees can obscure the channel and limit continuous photogrammetric data acquisition of both the channel bed and banks, while still providing useful information regarding the riparian canopy and even spot elevations of the channel. This paper presents a technique for the capture and analysis of close‐range photogrammetric data acquired from a vertically mounted non‐metric camera suspended 10 m above the channel bed by a unipod. The camera is positioned under the riparian forest canopy so that the channel bed can be imaged without obstruction. The system is portable and permits relatively rapid image acquisition over rough terrain and in dense forest. The platform was used to generate DEMs with a nominal ground resolution of 0·03 m. DEMs generated from this platform required post‐possessing to either adjust or eliminate erroneous cells introduced by the extraction process, overhanging branches, and by the effects of refraction at the air–water interface for submerged portions of the channel bed. The vertical precision in the post‐processed surface generally ranged from ± 0·01 to 0·1 m depending on the quality of triangulation and the characteristics of the surface being imaged. Copyright © 2010 John Wiley & Sons, Ltd.