Temporal variability of contemporary floodplain sedimentation in the Rhine–Meuse delta,The Netherlands

It is often believed that extreme but infrequent events are most important in the development of landforms. When evaluating the overall effect of large floods on floodplain sedimentation, quantitative measurements of both high- and low-magnitude events should be considered. To analyse the role of flood magnitude on floodplain sedimentation, we measured overbank sedimentation during floods of different magnitude and duration. The measurements were carried out on two embanked floodplain sections along the rivers Rhine and Meuse in The Netherlands, using sediment traps made of artificial grass. The results showed an increase in total sediment accumulation with flood magnitude, mainly caused by enhanced accumulation of sand. At low floodplain sections the increase in sediment deposition was smaller than expected from the strong increase in suspended sediment transport in the river. Spatial variability in sediment accumulation was found to depend both on flood magnitude and duration. Deposition of sand on natural levees mainly takes place during high-magnitude floods, whilst low floods and slowly receding floods are important for the deposition of silt and clay in low-lying areas, at greater distance from the main channel. © 1998 John Wiley & Sons, Ltd.     

Spatial variability of floodplain sedimentation at the event scale in the Rhine–Meuse delta,The Netherlands

This article addresses spatial variability of comtemporary floodplain sedimentation at the event scale. Measurements of overbank deposition were carried out using sediment traps on 11 floodplain sections along the rivers Waal and Meuse in The Netherlands during the high-magnitude flood of December 1993. During the flood, sand sheets were locally deposited behind a natural levee. At distances greater than 50 to 100 m from the river channel the deposits consisted mainly of silt- and clay-sized material. Observed patterns of deposition were related to floodplain topography and sediment transporting mechanisms. Though at several sites patterns were observed that suggest transport by turbulent diffusion, convection seems the dominant transporting mechanism, in particular in sections that are bordered by minor embankments. The average deposition of overbank fines ranged between 1·2 and 4·0 kg m⁻² along the river Waal, and between 1·0 and 2·0 kg m⁻² along the river Meuse. The estimated total accumulation of overbank fines (not including sand sheets) on the entire river Waal floodplain was 0·24 Mton, which is 19 per cent of the total suspended sediment load transported through the river Waal during the flood. © 1998 John Wiley & Sons, Ltd.     

Reconstruction of eroded and deposited sediment volumes of the embanked River Waal,the Netherlands,for the period ad 1631–present

In the last few centuries humans have modified rivers, and rivers have responded with noticeable changes in sedimentary dynamics. The objective of this study is to assess these responses of the sedimentary dynamics. Therefore, we calculated a sediment budget for eroded and deposited sediment volumes in a ~12‐km long floodplain section of the largest semi‐natural embanked but still dynamic lower Rhine distributary, for ~50‐years time slices between ad 1631 and present. This is the period during which embanked floodplains were formed by downstream migration of meander bends between confining dykes. Our sediment budget involves a detailed reconstruction of vertical and lateral accretion rates and erosion rates of floodplain sediment. To do so, we developed a series of historical geomorphological maps, and lithogenetic cross‐sections. Based on the maps and cross‐sections, we divided the floodplain into building blocks representing channel bed and overbank sediment bodies. Chronostratigraphy within the blocks was estimated by interpretation of heavy metal profiles and from optically stimulated luminescence (OSL) dating results. Sediment budgets were hence calculated as a change of volume of each building block between time steps. The amount of lateral accretion initially increased, as a result of island and sand bar formation following embankment. From the eighteenth century onwards, there was a decrease of lateral processes in time, which is a result of straightening of the river by human activities, and a reduction of water and sediment supply due to the construction of a new upstream bifurcation. With straightening of the river, the floodplain area grew. Artificial fixation of the channel banks after ad 1872 prevented lateral activity. From then on, overbank deposition became the main process, leading to a continuous increase of floodplain elevation, and inherent decrease of flooding frequency and sediment accumulation rate. Copyright © 2014 John Wiley & Sons, Ltd.     

Trends in suspended sediment grain size in the upper Yangtze River and its tributaries,as influenced by human activities

Abstract

Based on data from five hydrometric stations, Pingshan station on the Jinshajiang River, Gaochang station on the Minjiang River, Wulong station on the Wujiang River, Wusheng station on the Jialingjiang River and Yichang station on the Yangtze River, a study has been made of the temporal variation in grain size of suspended sediment load in the upper Yangtze River. The results show that in the past 40 years, the grain size of the suspended sediment load in the main stem and major tributaries of the upper Yangtze River has had a decreasing trend, that can be explained by the effect of reservoir construction and implementation of soil conservation measures. The reservoirs in the upper Yangtze River Basin, all used for water storage for hydro-electric generation and/or irrigation, have trapped coarse sediment from the drainage area above the dam and, thus, the sediment released now is much finer than before the construction of the reservoirs. The downstream channels are all gravel-bedded or even in bedrock, with little fine sediment, and thus, the released flow can hardly get a supply of fine sediment through eroding the bed. Then, after the downstream adjustment, the grain size of suspended sediment is still fine. Large-scale soil conservation measures have significantly reduced sediment yield in some major sediment source areas. The relatively coarse sediment is trapped and, thus, the sediment delivered to the river becomes finer.     

Variable source contributions to river bed sediments across three size fractions

Sediment tracing using geochemical properties is an efficient way to identify the spatial sources of transported sediments delivered to waterways. Here, the contribution of soil sources to river bed sediments has been quantified in Emu Creek, a headwater catchment in south eastern Queensland, Australia. Soil samples were collected from the eight major rock types present in the catchment and were related to river bed sediments collected from eight sites along the main channel. Geochemistry, as characterized by 39 elemental concentrations, was measured using inductively coupled plasma mass spectrometry and inductively coupled plasma optical emission spectrometry. Three particle size fractions were examined, <10, 10–63 and 63–212 µm, with the three resultant mixing models showing divergent results. We conclude that the results of sediment mixing models based on the analysis of one grain size should not be assumed to apply across the entire particle size range of transported sediment, emphasizing the need to match the size fraction used in tracing studies to that size fraction of interest in downstream sinks. Furthermore, we present results highlighting the control transport distance plays in source dominance, with this particularly evident in the coarser fraction, where local sources dominate over more distant sources. Copyright © 2015 John Wiley & Sons, Ltd.     

Spatial and temporal variation in particle size and particulate organic matter content in suspended particulate matter from peatland‐dominated catchments in Finland

Properties of suspended particulate matter play a vital role in transport processes, but information from boreal lowland river systems with high organic loads is limited. This study analysed data from 2 years of sampling at 30 locations in Finland (204 samples in total) using suspended particulate matter samplers to determine effective and absolute particle size and organic fractions. Mean d₅₀ value was 22 and 49 µm for absolute and effective particle size, respectively. The organic fraction content ranged from 2.1% to 36% (mean 9.6%), highlighting the importance of particle organic matter for suspended particulate matter flux in the region. The results indicated that the suspended particulate matter particle size distribution and load in the study region is dominated by composite particles. There were considerable spatial and temporal variations in transport of organic fractions, effective particle size and degree of aggregation (range 1.5–93%). Headwaters and, in particular, late summer and spring flood conditions with flow peaks produced the largest composite particles, whereas agriculture‐dominated sites produced smaller but more tightly compacted particles. Organic plant fibres appeared to play a vital role in floc formation in peat‐covered catchments, whereas in agriculture‐dominated catchments, land use‐derived aggregates dominated the composition. This study provides empirical evidence of the importance of effective particle size measurement in understanding the dynamics of suspended particulate matters in boreal lowland river systems. Copyright © 2014 John Wiley & Sons, Ltd.     

An investigation into the efficiency of particle size separation using Stokes’ Law

The accuracy of gravimetric fractionation as a means of obtaining size fractions from marine sediments has been explored. Analysis of the particle size distribution and sediment properties of fractions obtained using this method was undertaken. This has highlighted the extent to which experimental artefacts rather than variations in sediment characteristics may adversely affect the efficiency of the fractionation process. Copyright © 1999 John Wiley & Sons, Ltd.     

贵州省麦岗水库沉积物磁性特征及其与粒度的关系

对贵州省麦岗水库沉积物环境磁性特征的研究表明,亚铁磁性矿物主导了沉积物矿物磁性特征,但同时也存在反铁磁性矿物等其他矿物,超顺磁颗粒在沉积物中广泛存在.在所选矿物磁性参数中,χlf、χfd、SOFT与粒度不相关;χARM、SIRM、F300与粒度相关,但相关系数不高;χARM/χlf、χARM/SIRM和粒度显著相关,可以作为粒度的代用指标.研究结果显示,磁性参数确实可以作为粒度的代用指标.但对比研究表明,在不同沉积环境,甚至相似沉积环境的沉积物中,矿物磁性参数和粒度的关系可能不同,在特定沉积环境中,利用磁性参数作为粒度的代用指标应该在充分研究的基础上进行,使研究结果更为可靠.     

Evaluation of a simple,inexpensive, in situ sampler for measuring time‐weighted average concentrations of suspended sediment in rivers and streams

The accurate measurement of suspended sediment (<200 μm) in aquatic environments is essential to understand and effectively manage changes to sediment, nutrient, and contaminant concentrations on both temporal and spatial scales. Commonly used sampling techniques for suspended sediment either lack the ability to accurately measure sediment concentration (e.g., passive sediment samplers) or are too expensive to deploy in sufficient number to provide landscape‐scale information (e.g., automated discrete samplers). Here, we evaluate a time‐integrated suspended sediment sampling technique, the pumped active suspended sediment (PASS) sampler, which collects a sample that can be used for the accurate measurement of time‐weighted average (TWA) suspended sediment concentration and sediment particle size distribution. The sampler was evaluated against an established passive time‐integrated suspended sediment sampling technique (i.e., Phillips sampler) and the standard discrete sampling method (i.e., manual discrete sampling). The PASS sampler collected a sample representative of TWA suspended sediment concentration and particle size distribution of a control sediment under laboratory conditions. Field application of the PASS sampler showed that it collected a representative TWA suspended sediment concentration and particle size distribution during high flow events in an urban stream. The particle size distribution of sediment collected by the PASS and Phillips samplers were comparable and the TWA suspended sediment concentration of the samples collected using the PASS and discrete sampling techniques agreed well, differing by only 4% and 6% for two different high flow events. We should note that the current configuration of the PASS sampler does not provide a flow‐weighted measurement and, therefore, is not suitable for the determination of sediment loads. The PASS sampler is a simple, inexpensive, and robust in situ sampling technique for the accurate measurement of TWA suspended sediment concentration and particle size distribution.     

Environmental records of lacustrine sediments in different time scales: Sediment grain size as an example

Understanding the past is the key to know thepresent and to predict the future. As a core project ofthe International Geosphere Biosphere Program, PastGlobal Changes (PAGES) aims to reconstruct theevolution history of global climate, global environ-ment and global ecosystem with resort to all kinds ofnatural records, so as to reveal the change rules(change processes, change amplitude and change rate)of the global environment and thus provide scientificbasis for predicting climate changes p…     

Particle size characteristics of suspended sediment in hillslope runoff and stream flow

This study examines the particle size characteristics of hillslope soils and fluvial suspended sediments in an agricultural catchment. Samples of surface runoff and stream flow were collected periodically and analysed for the size distributions of the effective (undispersed) sediment. This sediment was subsequently dispersed and the ultimate size distributions determined. The median effective particle size of stream suspended sediment was considerably coarser than the median ultimate particle size, indicating that most of the load included a substantial proportion of aggregates. Moreover, the proportion of fine material (i.e. silt and clay) increased, and the proportion of sand-sized material decreased, with increasing discharge. This decrease in sediment size with increased flow, which is contrary to the traditional assumption of a positive discharge/particle size relationship, is thought to reflect: (i) the influx of silt and clay, predominantly the former, originating on the catchment slopes and brought to the stream by overland flow along vehicle wheelings, roads and tracks; and (ii) erosion of fine material from the channel bed and banks. During large storms, however, the proportion of sand-sized sediment increased during the rising limb of the hydrograph, as a result of the entrainment of coarser source material from the valley floor during overbank flooding. The stream suspended sediment was finer than the catchment soils and considerably finer than material eroding from the catchment slopes during storms. The degree of clay and silt enrichment in the suspended sediments was largely the result of preferential deposition of the coarser fraction during the transport and delivery of sediment from its source to basin outlet. The data from this study confirm that a significant mode of sediment transport in fluvial systems is in the form of aggregates, and that the dispersed sediment size distribution is inappropriate for determining the transportability of sediment by flow. © 1997 by John Wiley & Sons, Ltd.     

Characterization of the spatial variability of channel morphology

The spatial variability of two fundamental morphological variables is investigated for rivers having a wide range of discharge (five orders of magnitude). The variables, water‐surface width and average depth, were measured at 58 to 888 equally spaced cross‐sections in channel links (river reaches between major tributaries). These measurements provide data to characterize the two‐dimensional structure of a channel link which is the fundamental unit of a channel network. The morphological variables have nearly log‐normal probability distributions. A general relation was determined which relates the means of the log‐transformed variables to the logarithm of discharge similar to previously published downstream hydraulic geometry relations. The spatial variability of the variables is described by two properties: (1) the coefficient of variation which was nearly constant (0·13–0·42) over a wide range of discharge; and (2) the integral length scale in the downstream direction which was approximately equal to one to two mean channel widths. The joint probability distribution of the morphological variables in the downstream direction was modelled as a first‐order, bivariate autoregressive process. This model accounted for up to 76 per cent of the total variance. The two‐dimensional morphological variables can be scaled such that the channel width–depth process is independent of discharge. The scaling properties will be valuable to modellers of both basin and channel dynamics. Published in 2002 John Wiley & Sons, Ltd.     

Time‐integrated sampling of fluvial suspended sediment: a simple methodology for small catchments

Fine‐grained (<62·5 µm) suspended sediment transport is a key component of the geochemical flux in most fluvial systems. The highly episodic nature of suspended sediment transport imposes a significant constraint on the design of sampling strategies aimed at characterizing the biogeochemical properties of such sediment. A simple sediment sampler, utilizing ambient flow to induce sedimentation by settling, is described. The sampler can be deployed unattended in small streams to collect time‐integrated suspended sediment samples. In laboratory tests involving chemically dispersed sediment, the sampler collected a maximum of 71% of the input sample mass. However, under natural conditions, the existence of composite particles or flocs can be expected to increase significantly the trapping efficiency. Field trials confirmed that the particle size composition and total carbon content of the sediment collected by the sampler were representative statistically of the ambient suspended sediment. Copyright © 2000 John Wiley & Sons, Ltd.     

Simulations of spatial variability in particle‐size emissions during wind erosion events

This study simulates how spatial variations in particle‐size emissions from a playa affect bulk and size‐resolved dust concentration profiles during two contrasting wind erosion events (a small local and a large regional event) in the Channel Country, Lake Eyre Basin, Australia. The regional event had higher dust concentration as a result of stronger frontal winds and higher erodibility across the playa. For each event, two emission scenarios are simulated to determine if measured size‐resolved dust concentration profiles can be explained by spatial variability in source area emissions. The first scenario assumes that particle‐size emissions from source areas occur at a uniform rate, while the second scenario assumes that particle‐size emissions vary between and within source areas. The uniform emission scenario, reproduced measured bulk dust concentration profiles (R² = 0·93 regional and R² = 0·81 local), however simulated size‐resolved dust concentration profiles had poor statistical fits to measured size‐resolved profiles for each size class (the highest were R² = 0·5 regional and R² = 0·3 local). For the differential particle‐size emission scenario, the fit to the measured bulk dust concentration profiles is improved (R² = 0·97 regional and R² = 0·83 local). However, the fit to the size‐resolved profiles improved dramatically, with the lowest being R² = 0·89 (regional) and R² = 0·80 (local). Particle‐size emission models should therefore be tested against both bulk and size‐resolved dust concentration profiles, since if only bulk dust concentration profiles are used model performance may be over‐stated. As the source areas in the first 90 m upwind of the tower were similar for both events, the percentage contributions of each particle‐size class to total emissions can be compared. The contribution of each particle‐size class was similar even though the wind speed, turbulence and dust concentrations were significantly different; suggesting that the contribution of each particle‐size to the total emitted dusts is not related to wind speed and turbulence. Copyright © 2012 John Wiley & Sons, Ltd.     

Traditional and multivariate techniques in the interpretation of floodplain sediment grain size variations

The vertical and horizontal variation of sedimentary fades is the raw data for the interpretation of flood plain history from which palaeohydrological inferences are frequently drawn. Mixed and fine floodplain sediments present problems of interpretation because of a large grain size range and frequent polymodality caused by the mixing of process-associated grain size components. This paper discusses the use of traditional grain size statistics and the use of the mode and multivariate statistics. The mode, although much neglected, is indicative of up-profile grain size changes and has practical advantages over the mean for mixed and fine floodplain sediments. Constrained cluster analysis and principal components analysis are used directly on Coulter counter results. These techniques can rapidly divide a floodplain profile into grain size units and indicate the principal vectors of grain size variation which will be related to the changing processes of deposition. Principal components analysis reveals the importance of the medium to fine silt category in accounting for grain size variations, suggesting that a critical factor in determining the type of alluvial unit deposited is the degree to which it has received fine suspended material. Grain size data from the Lower Severn are used to construct a CM diagram which is compared with a texture triangle. From both the CM and multivariate analysis a generalized backswamp profile is constructed which shows the existence of a coarser top unit caused by the addition of a fine to medium sand component to the underlying sediment during the Late Holocene.     

The particle size characteristics of fine‐grained channel deposits in the River Exe Basin,Devon, UK

Deposition and storage of fine‐grained (<62·5 μm) sediment in the hyporheic zone of gravel bed rivers frequently represents an important cause of aquatic habitat degradation. The particle size characteristics of such fine‐grained bed sediment (FGBS) exert an important control on its hydrodynamic properties and environmental impact. Traditionally, particle size analysis of FGBS in gravel bed rivers has focused on the absolute size distribution of the chemically dispersed mineral fraction. However, recent work has indicated that in common with fluvial suspended sediment, significant differences may exist between the absolute and the in situ, or effective, particle size composition of FGBS, as a result of the existence of aggregates, or composite particles. In the investigation reported in this paper, sealable bed traps that could be remotely opened to sample sediment deposited during specific storm runoff events and a laser back‐scatter probe were used to quantify the temporal and spatial variability of both the absolute and effective particle size composition of FGBS, and the associated suspended sediment from four gravel bed rivers in the Exe Basin, Devon, UK. The absolute particle size distributions of both the FGBS and suspended sediment evidenced c. >95%<62·5 μm sized primary particles and displayed a seasonal winter–summer fining, while the opposite trend was displayed by the effective particle size distribution of the FGBS and suspended sediment. The effective particle size distributions of both were typically highly aggregated, comprising up to 68%>62·5 μm sized particles. Spatial variation in the effective particle size and aggregation parameters was of secondary importance relative to temporal variation. The effective particle size distribution of the FGBS was consistently coarser and more aggregated than the associated suspended sediment and there was evidence of aggregate break‐up in samples of resuspended bed sediment. The implications of these findings for sediment transport modelling are considered. Copyright © 1999 John Wiley & Sons, Ltd.     

太湖西北部表层沉积物粒度特征与沉积环境

对太湖西北部主要入湖河流、河口及近岸湖区64个表层沉积物样品进行粒度分析,结合粒度参数计算和聚类分析,探讨了表层沉积物的粒度分布特征及其沉积类型.研究结果表明:研究区沉积物平均粒径介于4.0~58.7μm之间,粒级组分为黏土、粉砂和砂,其含量的均值分别为7.19%、81.81%和11.00%.太湖西北部表层沉积物以粉砂和砂质粉砂为主;研究区粒度总体呈南粗北细的分布特征,太湖西部沿岸区距离物源区较近且水动力条件复杂,沉积物粒度较粗.太湖北部入湖河流沉积物的频率曲线峰形较宽,峰值位于细粒级;西岸入湖河道多呈单峰态,粒径偏粗;河口区沉积物粒径较河道偏粗,粗颗粒含量高.Q型聚类分析结果表明,研究区可分为4类沉积区,其中3类沉积区有典型特征:第1类沉积区主要分布在太湖西部沿岸,其沉积物粒度相对较粗;第2类沉积区主要位于入湖河流河口,沉积物粒度最粗;第3类沉积区位于蓝藻频发的梁溪河,其沉积物黏土含量极高,表明沉积物粒度特征可能与污染状况有一定的联系.     

Recent increase of river–floodplain suspended sediment exchange in a reach of the lower Amazon River

We analyzed variation of channel–floodplain suspended sediment exchange along a 140 km reach of the lower Amazon River for two decades (1995–2014). Daily sediment fluxes were determined by combining measured and estimated surface sediment concentrations with river–floodplain water exchanges computed with a two‐dimensional hydraulic model. The average annual inflow to the floodplain was 4088 ± 2017 Gg yr^?1 and the outflow was 2251 ± 471 Gg yr^?1, respectively. Prediction of average sediment accretion rate was twice the estimate from a previous study of this same reach and more than an order of magnitude lower than an estimate from an earlier regional scale study. The amount of water routed through the floodplain, which is sensitive to levee topography and increases exponentially with river discharge, was the main factor controlling the variation in total annual sediment inflow. Besides floodplain routing, the total annual sediment export depended on the increase in sediment concentration in lakes during floodplain drainage. The recent increasing amplitude of the Amazon River annual flood over two decades has caused a substantial shift in water and sediment river–floodplain exchanges. In the second decade (2005–2014), as the frequency of extreme floods increased, annual sediment inflow increased by 81% and net storage increased by 317% in relation to the previous decade (1995–2004). Copyright © 2017 John Wiley & Sons, Ltd.     

Hydroclimatic and channel snowpack controls over suspended sediment and grain size transport in a High Arctic catchment

Temporal variability in suspended sediment delivery processes was studied during three seasons in a 7·9 km² catchment at Cape Bounty, Melville Island, Nunavut in the Canadian High Arctic. Discharge was controlled primarily by the magnitude of snowmelt, with limited inputs from ground ice melt and precipitation. Years with greater snowpack non‐linearly increased sediment yield and resulted in seasonal counter‐clockwise hysteresis, while a year with low snowpack resulted in reduced sediment yield and clockwise hysteresis, and indicates that sediment was increasingly available after the onset of streamflow. In addition to the event‐scale hysteresis observed during the nival discharge peak, diurnal clockwise hysteresis was observed during all three seasons and suggests daily exhaustion of sediment supplies. These results indicate that the channel snowpack plays a primary role over sediment accessibility during the nival discharge peak. Similarly, grain size analysis of suspended material in the river showed that the coarsest mean grain size was transported during the early phase of peak nival discharge and indicates that isolated sources of coarse material were being accessed by high velocity flow. Snowpack is present through the peak nival period and conditions sediment availability by isolating channel sediments from high‐energy flow. These results indicate sediment delivery characteristics in small High Arctic catchments reflect complex interactions with channel snowpack and disproportionate responses to flow conditions that differ from glacial and temperate settings. Copyright © 2008 John Wiley & Sons, Ltd.     

Modelling the decadal dynamics of reach-scale river channel evolution and floodplain turnover in CAESAR-Lisflood

Sedimentary deposits provide records of environmental change quantifying erosion fluxes conditioned by natural and anthropogenic disturbances. These fluxes are lagged by internal storage, particularly within floodplains, complicating reconstruction of environmental changes. The time sediment remains in storage underpins the interpretation of sedimentary records and accurate monitoring of pollutant fluxes. Turnover time is a measure of the timeframe to erode every floodplain surface. CAESAR-Lisflood is used to simulate fluvial evolution at reach scale, providing a basis for quantifying environmental changes on the timescales of sediment storage. We evaluate the accuracy of CAESAR-Lisflood simulations of channel changes and turnover times for alluvial floodplains using historical channel changes reconstructed for 10 reaches in northern England to quantify model accuracy in replicating mean annual erosion, deposition and channel lateral migration rates, alongside planform morphology. Here, a split-sample testing approach is adopted, whereby five of the reaches were calibrated and the resulting parameter values were applied to the other reaches to evaluate the transferability of parameter settings. The lowest overall integrated error identified the best-fit simulations and showed that modelled process rates were within ~25–50% of rates from historical reconstructions, generally. Calibrated parameters for some reaches are widely transferable, producing accurate geomorphic changes for some uncalibrated sites. However, large errors along some reaches indicate that reach-specific parameterization is recommended. Turnover times are underpinned by the assumption that areas of floodplain previously unvisited by the channel are reworked. This assumption has been challenged by studies that show floodplain (re)occupation rates vary spatially. However, this limitation is less important for the short-duration simulations presented here. The simulations reconstruct floodplain turnover times estimated by mapped rates mostly successfully, demonstrating the potential applicability of calibrated parameters over much longer timescales. Errors in the form of under-predicted erosion rates propagated, resulting in over-predicted turnover times by even greater magnitudes. © 2020 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.