首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 906 毫秒
1.
Quartz Al–Mg granulites exposed at In Hihaou, In Ouzzal (NW Hoggar), preserve an unusual high-grade mineral association stable at temperatures up to 1050°C, involving the parageneses orthopyroxene–sillimanite–garnet–quartz, sapphirine–quartz and spinel–quartz. The phase relationships within the FMAS system show that a continuum exists between the earlier prograde reaction textures and those of the later decompressive event. The following mineral reactions involving sillimanite are deduced: (1) Grt+Qtz→Opx+Sil, (2) Opx+Sil→Grt+Spr+Qtz, (3) Grt+Sil+Qtz→Crd, (4) Grt+Sil→Crd+Spr, (5) Grt+Sil+Spr→Crd+Spl, (6) Grt+Sil→Crd+Spl, (7) Grt+Crd+Sil→Spl+Qtz and (8) Grt+Sil→Spl+Qtz. Minerals in quartz Al–Mg granulites display compositional variations consistent with the observed reactions. The Mg/(Mg+Fe2+) range of the main minerals is as follows: cordierite (0.81–0.97), sapphirine (0.77–0.88), orthopyroxene (0.65–0.81), garnet (0.33–0.64) and spinel (0.23–0.56). The reaction textures and the evolution of the mineral assemblages in the quartz Al–Mg granulites indicate a clockwise P–T trajectory characterized by peak conditions of at least 10 kbar and 1050°C, followed by decompression from 10 to 6 kbar at a temperature of at least 900°C.  相似文献   

2.
Due to the retrograde cation exchange problems experienced by conventional geothermobarometers above their closure temperatures, petrogenetic grids are a potentially powerful alternative to unravelling the PT evolution of ultrahigh‐T granulite terranes. A new qualitative KFMASH (K2O–FeO–MgO–Al2O3–SiO2–H2O) petrogenetic grid for Mg–Al rich metapelites containing K‐feldspar, sillimanite and quartzofeldspathic melt that successfully accounts for the majority of assemblages composed of variations of sapphirine, spinel, garnet, orthopyroxene, cordierite, biotite and quartz is developed. Univariant reactions are predicted utilizing a newly derived ‘melt projection’ and these reactions are entirely consistent with algebraically calculated reaction coefficients obtained using a set of standard phase compositions. Based upon observations of commonly associated mineral assemblages in natural lithologies the [Spr, Spl], [Qtz, Spl], [Bt, Spl], [Opx, Spr], [Opx, Qtz] and [Bt, Opx] invariant points are assumed to be stable, whilst the [Grt, Spr], [Grt, Qtz], [Spr, Qtz] and [Crd, Qtz] are assumed to be metastable. Biotite‐bearing assemblages are confined to the lowest temperatures, and sapphirine + quartz to the highest temperatures. Orthopyroxene + sillimanite ± quartz assemblages are confined to the highest pressures, whilst spinel‐bearing assemblages are stabilized by lower pressures. The alternative choice of invariant point stability leads to significant differences between this grid and previously proposed topologies. Spinel cannot be stable along with the orthopyroxene and sillimanite assemblage as previously proposed. Further, more subtle differences in topology result from the treatment of H2O in the chemographic projection used to deduce univariant reactions, and projecting from a water‐bearing quartzofeldspathic melt does not yield the same reaction coefficients as projection from H2O. The new grid allows reinterpretation of previously proposed evolutionary P–T paths for Mg–Al rich granulites from the Napier Complex and Rauer Group, East Antarctica, and In Ouzzal, Algeria.  相似文献   

3.
The Mollendo–Camana Block (MCB) is a 50 × 150 km Precambrian inlier of the Andean belt that outcrops along the Pacific coast of southern Peru. It consists of stromatic migmatites of Paleoproterozoic heritage intensely metamorphosed during the Grenville event (c. 1 Ga; U‐Pb and U‐Th‐Pb ages on zircon and monazite). In the migmatites, aluminous mesosomes (FMAS) and quartzofeldspathic leucosomes (KFMASH), contain various amounts of K‐feldspar (Kfs), orthopyroxene (XMg Opx = 0.86), plagioclase (Pl), sillimanite (Sil; exceptionally kyanite, Ky) ilmenite (Ilm), magnetite (Mag), quartz (Qtz), and minor amounts of garnet (XMg Grt = 0.60), sapphirine (XMg Spr = 0.87), cordierite (XMg Crd = 0.92) and biotite (XMg Bt = 0.83). The ubiquitous peak mineral assemblage is Opx‐Sil‐Kfs‐Qtz‐(± Grt) in most of the MCB, which, together with the high Al content of orthopyroxene (10% Al2O3) and the local coexistence of sapphirine‐quartz, attest to regional UHT metamorphism (> 900 °C) at pressures in excess of 1.0 GPa. Fluid‐absent melting of biotite is responsible for the massive production of orthopyroxene that proceeded until exhaustion of biotite (and most of the garnet) in the southern part of the MCB (Mollendo‐Cocachacra areas). In this area, a first stage of decompression from 1.1–1.2 to 0.8–0.9 GPa at temperatures in excess of 950 °C, is marked by the breakdown of Sil‐Opx to Spr‐Opx‐Crd assemblages according to several bivariant FMAS reactions. High‐T decompression is also shown by Mg‐rich garnet being replaced by Crd‐Spr‐ and Crd‐Opx‐bearing symplectites, and reacting with quartz to produce low‐Al‐Opx‐Sil symplectites in quartz‐rich migmatites. Neither osumilite nor spinel‐quartz assemblages being formed, isobaric cooling at about 0.9 GPa probably followed the initial decompression and proceeded with massive precipitation of melts towards the (Os) invariant point, as demonstrated by Bt‐Qtz‐(± pl) symplectites in quartz‐rich migmatites (melt + Opx + Sil = Bt + Grt + Kfs + Qtz). Finally, Opx rims around secondary biotite attest to late fluid‐absent melting, compatible with a second stage of decompression below 900 °C. The two stages of decompression are interpreted as due to rapid tectonic denudation whereas the regional extent of UHT metamorphism in the area, probably results from large‐scale penetration of hot asthenospheric mantle at the base of an over‐thickened crust.  相似文献   

4.
Sapphirine granulites from a new locality in the Palni Hill Ranges, southern India, occur in a small enclave of migmatitic, highly magnesian metapelites (mg=85–72) within massive enderbitic orthogneiss. They show a variety of multiphase reaction textures that partially overprint a coarse-grained high-pressure assemblage of Bt+Opx+Ky+Grt+Pl+Qtz. The sequence of reactions as deduced from the corona and symplectite assemblages, together with petrogenetic grid considerations, records a clockwise P–T evolution with four distinct stages. (1) Equilibration of the initial high-P assemblage in deep overthickened crust (12 kbar/800–900 °C) was followed by a stage of near-isobaric heating, presumably as a consequence of input of extra heat provided by the voluminous enderbitic intrusives. During heating, kyanite was converted to sillimanite, and biotite was involved in a series of vapour-phase-absent melting reactions, which resulted in the ultra-high-temperature assemblage Opx+Crd+Kfs+Spr±Sil, Grt, Qtz, Bt, coexisting with melt (equilibration at c. 950–1000° C/11–10 kbar). (2) Subsequently, as a result of decompression of the order of 4 kbar at ultra-high temperature, a sequence of symplectite assemblages (Opx+Sil+Spr/Spr+Crd→Opx+Spr+Crd→Opx+Crd→Opx+Crd+Spl/Crd+Spl) developed at the expense of garnet, orthopyroxene and sillimanite. This stage of near-isothermal decompression implies rapid ascent of the granulites into mid-crustal levels, possibly due to extensional collapse and erosion of the overthickened crust. (3) Development of late biotite through back-reaction of melt with residual garnet indicates a stage of near-isobaric cooling to c. 875 °C at 7–8 kbar, i.e. relaxation of the rapidly ascended crust to the stable geotherm. (4) A second period of near-isothermal exhumation up to c. 6–5 kbar/850 °C is indicated by the partial breakdown of late biotite through volatile phase-absent melting reactions. Available isotope data suggest that the early part of the evolutionary history (stages 1–3) is presumably coeval with the early Proterozoic metamorphism in the extended granulite terrane of the Nilgiri, Biligirirangan and Shevaroy Hills to the north, while the exhumation of the granulites from mid-crustal levels (stage 4) occurred only during the Pan-African thermotectonic event, which led to the accretion of the Kerala Khondalite Belt to the south.  相似文献   

5.
Low‐pressure crystal‐liquid equilibria in pelitic compositions are important in the formation of low‐pressure, high‐temperature migmatites and in the crystallization of peraluminous leucogranites and S‐type granites and their volcanic equivalents. This paper provides data from vapour‐present melting of cordierite‐bearing pelitic assemblages and augments published data from vapour‐present and vapour‐absent melting of peraluminous compositions, much of which is at higher pressures. Starting material for the experiments was a pelitic rock from Morton Pass, Wyoming, with the major assemblage quartz‐K feldspar‐biotite‐cordierite, approximately in the system KFMASH. A greater range in starting materials was obtained by addition of quartz and sillimanite to aliquots of this rock. Sixty‐one experiments were carried out in cold‐seal apparatus at pressures of 1–3.5 kbar (particularly 2 kbar) and temperatures from 700 to 840 °C, with and without the addition of water. In the vapour‐present liquidus relations at 2 kbar near the beginning of melting, the sequence of reactions with increasing temperature is: Qtz + Kfs + Crd + Sil + Spl + V = L; Qtz + Kfs + Crd + Spl + Ilm + V = Bt + L; and Qtz + Bt + V = Crd + Opx + Ilm + L. Vapour‐absent melting starts at about 800 °C with a reaction of the form Qtz + Bt = Kfs + Crd + Opx + Ilm + L. Between approximately 1–3 kbar the congruent melting reaction is biotite‐absent, and biotite is produced by incongruent melting, in contrast to higher‐pressure equilibria. Low pressure melts from pelitic compositions are dominated by Qtz‐Kfs‐Crd. Glasses at 820–840 °C have calculated modes of approximately Qtz42Kfs46Crd12. Granites or granitic leucosomes with more than 10–15% cordierite should be suspected of containing residual cordierite. The low‐pressure glasses are quite similar to the higher‐pressure glasses from the literature. However, XMg increases from about 0.1–0.3 with increasing pressure from 1 to 10 kbar, and the low‐temperature low‐pressure glasses are the most Fe‐rich of all the experimental glasses from pelitic compositions.  相似文献   

6.
The Southern Brittany Migmatite Belt (SBMB), which evolved through the metamorphic peak between c. 400 Ma and c. . 370 Ma ago, consists of a heterogeneous suite of high-grade gneisses and anatectic migmatites, both metatexites and diatexites. Rare garnet-cordierite gneiss layers record evidence of an early prograde P-T path. In these rocks, growth-zoned garnet cores and a sequence of included mineral assemblages in garnet, from core to rim, of Qtz + Ilm + Ky, Pl + Ky + St + Rt + Bt and Pl + Sil + St + Rt + Bt constrain a prograde evolution during which the reactions Ilm + Ky + Qtz→ Aim + Rt, Ms + Chl→ St + Bt + Qtz + V and St + Qtz→ Grt + Sil + V were crossed. Parts of this prograde evolution are preserved as inclusion assemblages in garnet in all other rock types. In all rock types, garnet has reverse zoned rims, and garnet replacement by cordierite and/or biotite and plagioclase suggests the following reactions have occurred: Grt + Sil + Qtz→ Crd → Hc ± Ilm, Bt + Sil + Qtz → Crd ± Hc → Ilm → Kfs + V and (Na + Ca + K + Ti) + Grt → Bt + Pl + Qtz. Microstructural analysis of reaction textures in conjunction with a petrogenetic grid has enabled the construction of a tightly constrained 'clockwise' P–T path for the SBMB. The high-temperature part of the path has a steep dT/dP slope characteristic of near isothermal decompression. It is proposed that the P-T path followed by the SBMB is the result of the inversion, by overthrusting, of a back-arc basin and that such a tectonic setting may be applicable to other high-temperature migmatite terranes. The near isothermal decompression is at least partly driven by the upward (diapiric) movement of the diatexite/anatectic granite core of the SBMB.  相似文献   

7.
Mid‐crustal Archean pelitic granulites in the Vredefort Dome experienced a static, low‐P granulite facies overprint associated with the formation of the dome by meteorite impact at 2.02 Ga. Heating and exhumation were virtually instantaneous, with the main source of heat being provided by energy released from nonadiabatic decay of the impact shock wave. Maximum temperatures within a radius of a few kilometres of the centre of the structure exceeded 900 °C and locally even exceeded 1350 °C. This led to comprehensive melting of the precursor Archean granulite assemblages (Grt + Bt + Qtz + Pl + Ksp ± Crd ± Opx ± Sil) followed by peritectic crystallization of aluminous alkali feldspar+Crd + Spl ± Crn ± Sil parageneses and the segregation of small, evolved, biotite leucogranite bodies. However, at a distance of c. 6 km from the centre pre‐impact rock features are largely preserved, although partial replacement of garnet by symplectitic coronas of Crd + Opx ± Spl ± Pl and biotite by orthopyroxene indicate that peak temperatures approached 775 ± 50 °C. Thin interstitial moats of K‐feldspar are closely associated with the orthopyroxene coronas; they are interpreted as the remnants of low‐proportion partial melts generated by biotite breakdown. Both the textures and mineral compositional data support reduced equilibration volumes in these rocks, which reflect rapid isobaric cooling following shock heating and exhumation. The high temperatures and strong lateral thermal gradient are consistent with the modelled impact‐induced isotherm pattern for a 200–300 km diameter impact crater.  相似文献   

8.
Summary The Karimnagar granulite terrain is an integral part of the Eastern Dharwar Craton (EDC). It has received much interest because of the only reported granulite facies rocks in the EDC. These granulites contain quartz-free sapphirine-spinel-bearing granulites, kornerupine – bearing granulites, mafic granulites, orthopyroxene-cordierite gneisses, charnockites, amphibolites, dolerite dykes, granite gneisses, quartzites and banded magnetite quartzite. The orthopyroxene-cordierite gneisses occur as enclaves within granite-gneiss in association with banded magnetite quartzites, charnockites and amphibolites. The observed reaction textures, spectacular as they are, have an extraordinary information content within a tiny domain. Coronas, symplectites and resorption textures are of particular interest as they reflect discontinuous or continuous reactions under changing physical conditions. The main mineral assemblages encountered in these gneisses are orthopyroxene – cordierite – biotite – plagioclase – perthite – quartz and garnet – orthopyroxene – cordierite – biotite – quartz – plagioclase – perthite ± sillimanite. Multiphase reaction textures in conjunction with mineral chemical data in the KFMASH system indicate the following reactions: Based on chemographic relationships and petrogenetic grids in the K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH) system, a sequence of prograde (early stage), isothermal decompression (middle stage) and retrograde (late stage) reactions (‘back reactions’ and hydration reactions) are inferred. Relatively lower PT estimates (0.35 GPa/550–750 °C) obtained from the different geothermobarometers are attributed to late Fe–Mg re-equilibration during cooling. Therefore, the convergence method has been applied to retrieve simultaneously the PT conditions of the thermal peak of metamorphism. The near thermal peak condition of metamorphism estimated by the convergence method are 850 °C/0.62 GPa. The PT estimates define a retrograde trajectory with substantial decompression.  相似文献   

9.
长英质片麻岩中堇青石的一种可能 的形成机制   总被引:6,自引:0,他引:6  
本文通过对南极拉斯曼丘陵长英质片麻岩变质过程中堇青石与其它矿物之间结构关系的研究,识别出明显不同的两种组合Pl+Kfs+Qtz(Grt)和Crd+Opq+Spl±Qtz,认为区内高级变质作用向深熔作用转化过程中发生了长英质组分和镁铁质组分的分凝。分凝出的长英质熔体与堇青石的形成没有直接关系;镁铁质组分较富Mg、Fe,贫Si、Ca,当镁铁质组分达到一定的富集程度时即形成堇青石。时间上,堇青石形成于降压过程中发生的深熔作用的晚期。  相似文献   

10.
Highly anhydrous granulites from Río Santa Rosa in the eastern Sierras Pampeanas of Argentina occur as a thick lens surrounded by melt-depleted migmatites. Grt–Crd granulite composed of Qtz+Pl+Grt+Crd+Ilm±Spl±Ath±Phl is the dominant rock, whereas Opx–Grt granulite appears as discontinuous lenses in the center of the granulite body. Grt–Crd granulite includes blocks of metabasite that are relics of refractory lithologic beds interlayered in the supracrustal sequence. A distinct assemblage composed of Qtz, Pl, Grt, Crd, Opx, Spl, Crn, Sil, Bt, Phl, Ath, and Fe–Ti oxides in different combinations was generated in a reaction zone between Grt–Crd granulites and metabasites at peak metamorphism (850–900 °C and 7.6±0.5 kbar). The PT trajectory of Grt–Crd granulites suggests an early prograde garnet-forming stage followed by nearly isothermal decompression that caused garnet breakdown. Melting and melt draining accompanying garnet growth was active during heating (to 900 °C) at intermediate pressures (∼7.6 kbar). Peak PT estimates for Opx–Grt granulites are similar to those obtained with Grt–Crd granulites, which indicates that both granulites passed through the highest thermal stage. These results constrain the late evolution of Opx–Grt granulite to a garnet-consuming stage. Furthermore, they imply that garnet formation in Opx–Grt granulite happened at an early prograde PT trajectory. Garnet growth in Opx–Grt granulite cannot result from heating at high pressure, which would lead to an apparent contradiction in the prograde PT paths of the two granulites. This discrepancy may be solved by demonstrating that Opx–Grt granulite is the product of synmetamorphic mafic magmatism that was contaminated while cooling. The Río Santa Rosa granulites are inferred to have formed in a thickened crust in which mafic magmatic activity providing a local heat input.  相似文献   

11.
The early Precambrian khondalite series is widely distributed in the Jining-Zhuozi-Fengzhen-Liangcheng area, southeastern Inner Mongolia. The khondalite series mainly consists of sillimanite garnet potash feldspar (or two-feldspar) gneiss and garnet biotite plagioclase gneiss. These gneissic rocks have commonly experienced granulite-facies metamorphism. In zircons separated from sillimanite garnet potash feldspar gneisses, many mineral inclusions, including Sil, Grt, Ky, Kfs, Qtz and Ap, have been identified by the Laser Raman spectroscopy. Generally, prograde metamorphic mineral inclusion assemblages such as Ky + Kfs + Qtz + Ap and Ky + Grt + Kfs + Qtz are preserved in the core of zircon, while peak granulite-facies metamorphic minerals including Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap are identified in the mantle and rim of the same zircon. However, in some zircons are only preserved the peak metamorphic minerals such as Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap from core to ri  相似文献   

12.
The evolution of the mineral assemblages and P–T conditions during partial melting of upper‐amphibolite facies paragneisses in the Orue Unit, Epupa Complex, NW Namibia, is modelled with calculated P–T–X phase diagrams in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O system. The close concordance of predictions from the phase diagrams to petrographic observations and thermobarometric results documents that quantitative phase diagrams are suitable to explain the phase relationships in migmatitic upper‐amphibolite facies low‐ and medium‐pressure metapelites, which occur in many high‐grade metamorphic terranes worldwide. Different mineral assemblages in the migmatitic metapelites of the Orue Unit reflect regional discrepancies in the metamorphic grade: in a Northern Zone, early biotite–sillimanite–quartz assemblages were replaced via melt‐producing reactions by cordierite‐bearing assemblages. In a Southern Zone, they were replaced via melt‐producing reactions by garnet‐bearing assemblages while cordierite is restricted to rare metapelitic granofelses, which preserve Grt–Sil–Crd–Bt peak assemblages. Peak‐metamorphic conditions of 700–750 °C at 5.5–6.7 kbar in the Southern Zone and of ~750 °C at 4.5 kbar in the Northern Zone are estimated by integrating thermobarometric calculations with data from calculated mineral composition isopleths. Retrograde back‐reactions between restite and crystallizing melt are recorded by the replacement of garnet by biotite–sillimanite and/or biotite–muscovite intergrowths. Upper‐amphibolite facies metamorphism and partial melting (c. 1340–1320 Ma) in the rocks of the Southern Zone of the Orue Unit, which underwent probably near‐isobaric heating–cooling paths, are attributed to contact metamorphism induced by the coeval (c. 1385–1319 Ma) emplacement of the Kunene Intrusive Complex, a huge massif‐type anorthosite body. The lower‐pressure metapelites of the Northern Zone are interpreted to record contact metamorphism at an upper crustal level.  相似文献   

13.
Abstract Muscovite-poor pelitic schists in the wallrocks of the Proterozoic Annex sulphide deposit, near Prieska, South Africa, contain peak metamorphic assemblages including Crd + Bt + Sil, St + Sil + Bt, Crd + St + Bt and, rarely, Ky + St ° Crd. All rocks include oligoclase, quartz and commonly Fe–Mn garnet, with or without muscovite. Peak assemblages, assigned to M2 regional metamorphism in the Gordonia Belt (Namaqua Province), are syn- to post-kinematic with respect to the main S2 fabric although larger staurolite grains contain S1 inclusion trails. Garnet–biotite thermometry, utilizing corrections for Fe3+, Mn, AlVI and Ti, yields peak temperatures of 571–624°C at pressures of 4.5–6.0 kbar. Consideration of the sympathetic variation of XMn in garnet with XMg in biotite and the preserved zoning patterns in prograde garnets, together with the inferred prograde transition from kyanite to sillimanite, indicates that heating occurred during mild decompression to the M2 metamorphic peak. Sillimanite and cordierite grew last in the prograde sequence, possibly related to a pulse of thermal metamorphism (M3) that is found along the margin of the Keimoes Suite batholith to the north. Retrograde assemblages, including Ms + Ky + Chl + Qtz (after Crd + Bt), Ky + Ms (after Sil) and Chl + Ms (after St) indicate a period of isobaric cooling (M4a) terminated by rehydration in the kyanite stability field at about 500°C. The size difference between prograde (1–2-mm) and retrograde (0.05–0.1-mm) mineral grains indicates substantial undercooling below equilibrium positions of relevant retrograde reactions prior to rehydration, and explains why cordierite that grew during M2 is almost completely destroyed. Post-M4a regrowth of staurolite and garnet (M4b) is spatially linked to sites of M4a rehydration. It reached temperatures of 510–530°C, remaining within the stability field of kyanite. A best fit of the observed textural history to the Namaqua orogenic cycle involves collision and heating (M2/D2) followed by granite intrusion (M3), rifting (M4a) and renewed heating due to crustal loading during volcanism (M4b). The P–T path for the Annex region is consistent with those derived from elsewhere in the Gordonia Belt and, with modification, to that published already for the nearby Prieska Copper Mines.  相似文献   

14.
ABSTRACT The high-grade rocks (metapelite, quartzite, metagabbro) of the Hisøy-Torungen area represent the south-westernmost exposures of granulites in the Proterozoic Bamble sector, south Norway. The area is isoclinally folded and a metamorphic P–T–t path through four successive stages (M1-M4) is recognized. Petrological evidence for a prograde metamorphic event (M1) is obtained from relict staurolite + chlorite + albite, staurolite + hercynite + ilmenite, cordierite + sillimanite, fine-grained felsic material + quartz and hercynite + biotite ± sillimanite within metapelitic garnet. The phase relations are consistent with a pressure of 3.6 ± 0.5 kbar and temperatures up to 750–850°C. M1 is connected to the thermal effect of the gabbroic intrusions prior to the main (M2) Sveconorwegian granulite facies metamorphism. The main M2 granulite facies mineral assemblages (quartz+ plagioclase + K-feldspar + garnet + biotite ± sillimanite) are best preserved in the several-metre-wide Al-rich metapelites, which represent conditions of 5.9–9.1 kbar and 790–884°C. These P–T conditions are consistent with a temperature increase of 80–100°C relative to the adjacent amphibolite facies terranes. No accompanying pressure variations are recorded. Up to 1-mm-wide fine-grained felsic veinlets appear in several units and represent remnants of a former melt formed by the reaction: Bt + Sil + Qtz→Grt + lq. This dehydration reaction, together with the absence of large-scale migmatites in the area, suggests a very reduced water activity in the rocks and XH2O = 0.25 in the C–O–H fluid system was calculated for a metapelitic unit. A low but variable water activity can best explain the presence or absence of fine-grained felsic material representing a former melt in the different granulitic metapelites. The strongly peraluminous composition of the felsic veinlets is due to the reaction: Grt +former melt ± Sil→Crd + Bt ± Qtz + H2O, which has given poorly crystalline cordierite aggregates intergrown with well-crystalline biotite. The cordierite- and biotite-producing reaction constrains a steep first-stage retrograde (relative to M2) uplift path. Decimetre- to metre-wide, strongly banded metapelites (quartz + plagioclase + biotite + garnet ± sillimanite) inter-layered with quartzites are retrograded to (M3) amphibolite facies assemblages. A P–T estimate of 1.7–5.6 kbar, 516–581°C is obtained from geothermobarometry based on rim-rim analyses of garnet–biotite–plagioclase–sillimanite–quartz assemblages, and can be related to the isoclinal folding of the rocks. M4 greenschist facies conditions are most extensively developed in millimetre-wide chlorite-rich, calcite-bearing veins cutting the foliation.  相似文献   

15.
Metapelites, migmatites and granites from the c. 2 Ga Mahalapye Complex have been studied for determining the PT–fluid influence on mineral assemblages and local equilibrium compositions in the rocks from the extreme southwestern part of the Central Zone of the Limpopo high‐grade terrane in Botswana. It was found that fluid infiltration played a leading role in the formation of the rocks. This conclusion is based on both well‐developed textures inferred to record metasomatic reactions, such as Bt ? And + Qtz + (K2O) and Bt ± Qtz ? Sil + Kfs + Ms ± Pl, and zonation of Ms | Bt + Qtz | And + Qtz and Grt | Crd | Pl | Kfs + Qtz reflecting a perfect mobility (Korzhinskii terminology) of some chemical components. The conclusion is also supported by the results of a fluid inclusion study. CO2 and H2O ( = 0.6) are the major components of the fluid. The fluid has been trapped synchronously along the retrograde PT path. The PT path was derived using mineral thermobarometry and a combination of mineral thermometry and fluid inclusion density data. The Mahalapye Complex experienced low‐pressure granulite facies metamorphism with a retrograde evolution from 770 °C and 5.5 kbar to 560 °C and 2 kbar, presumably at c. 2 Ga.  相似文献   

16.
The basement of the North China craton (NCC) can be divided into eastern and western blocks separating the Trans-North China orogen on the basis of petrologic associations, structures, metamorphic processes, and isotopic ages. Aluminous gneiss khondalites occur in the western block, and record a clockwise metamorphic P–T history characterized by nearly isothermal decompression following peak metamorphism at ca. 1.3 GPa and 825°C. Four metamorphic stages are recognized based on mineral assemblages. The early prograde metamorphic assemblage contains Ky+Bt+Ms+Grt+Pl+Qtz. The peak metamorphic mineral assemblage is characterized by Grt+Sil+Bt+Kfs+Pl+Qtz and the formation of cordierite after garnet, leading to a retrograde assemblage of Grt+Sil+Crd+Pl+Kfs+Qtz. Garnet retrogrades to biotite and the formation of pervasive matrix muscovite define a final metamorphic stage, inferred at ca. < 0.6 GPa and 700°C. Quantified metamorphic stages and a related clockwise P–T path derived from pseudosection analysis in the KMASH system suggest collision of the north Yinshan block with the South Ordos block at 1.92 Ga, before final suturing of the entire NCC basement.  相似文献   

17.
Abstract Dehydration-melting reactions, in which water from a hydrous phase enters the melt, leaving an anhydrous solid assemblage, are the dominant mechanism of partial melting of high-grade rocks in the absence of externally derived vapour. Equilibria involving melt and solid phases are effective buffers of aH2,o. The element-partitioning observed in natural rocks suggests that dehydration melting occurs over a temperature interval during which, for most cases, aH2o is driven to lower values. The mass balance of dehydration melting in typical biotite gneiss and metapelite shows that the proportion of melt in the product assemblage at T± 850°C is relatively small (10–20%), and probably insufficient to mobilize a partially melted rock body. Granulite facies metapelite, biotite gneiss and metabasic gneiss in Namaqualand contain coarse-grained, discordant, unfoliated, anhydrous segregations, surrounded by a finer grained, foliated matrix that commonly includes hydrous minerals. The segregations have modes consistent with the hypothesis that they are the solid and liquid products of the dehydration-melting reactions: Bt + Sil + Qtz + PI = Grt ° Crd + Kfs + L (metapelite), Bt + Qtz + Pl = Opx + Kfs + L (biotite gneiss), and Hbl + Qtz = Opx + Cpx + Pl + L (metabasic gneiss). The size, shape, distribution and modes of segregations suggest only limited migration and extraction of melt. Growth of anhydrous poikiloblasts in matrix regions, development of anhydrous haloes around segregations and formation of dehydrated margins on metabasic layers enclosed in migmatitic metapelites all imply local gradients in water activity. Also, they suggest that individual segregations and bodies of partially melted rock acted as sinks for soluble volatiles. The preservation of anhydrous assemblages and the restricted distribution of late hydrous minerals suggest that retrograde reaction between hydrous melt and solids did not occur and that H2O in the melt was released as vapour on crystallization. This model, combined with the natural observations, suggests that it is possible to form granulite facies assemblages without participation of external fluid and without major extraction of silicate melt.  相似文献   

18.
Spinel + cordierite + K‐feldspar + plagioclase + glass form coronas around garnet in metapelitic xenoliths at El Hoyazo and Mazarrón, two localities of the Neogene Volcanic Province (NVP) of SE Spain. The presence of fresh glass (quenched melt) in all phases shows that corona development occurred under partial melting conditions. Algebraic analysis of mass balance in the NCKFMASH system suggests the reaction Grt + Sil + Bt + Pl = Spl + Crd + Kfs + melt as the most plausible model for the development of coronas in the El Hoyazo sample, and indicates that biotite was required as reactant for the formation of cordierite. The P–T conditions for the formation of coronas are estimated at ~820 ± 50 °C, 4.5 ± 0.6 kbar at El Hoyazo, and ~820 ± 50 °C, 4.0 ± 0.4 kbar at Mazarrón. The El Hoyazo xenoliths record a complex P–T history, characterized by early melt production during heating and additional melting during decompression. A local cooling event characterized by minor retrograde reaction and melt crystallization preceded ascent and eruption. This study shows that detailed xenolith analysis may be used to track magma evolution in a chamber.  相似文献   

19.
The Legs Lake shear zone is a crustal‐scale thrust fault system in the western Canadian Shield that juxtaposes high‐pressure (1.0+ GPa) granulite facies rocks against shallow crustal (< 0.5 GPa) amphibolite facies rocks. Hangingwall decompression is characterized by breakdown of the peak assemblage Grt + Sil + Kfs + Pl + Qtz into the assemblage Grt + Crd + Bt ± Sil + Pl + Qtz. Similar felsic granulite occurs throughout the region, but retrograde cordierite is restricted to the immediate hangingwall of the shear zone. Textural observations, petrological analysis using PT/PMH2O phase diagram sections, and in situ electron microprobe monazite geochronology suggest that decompression from peak conditions of 1.1 GPa, c. 800 °C involved several distinct stages under first dry and then hydrated conditions. Retrograde re‐equilibration occurred at 0.5–0.4 GPa, 550–650 °C. Morphology, X‐ray maps, and microprobe dates indicate several distinct monazite generations. Populations 1 and 2 are relatively high yttrium (Y) monazite that grew at 2.55–2.50 Ga and correspond to an early granulite facies event. Population 3 represents episodic growth of low Y monazite between 2.50 and 2.15 Ga whose general significance is still unclear. Population 4 reflects low Y monazite growth at 1.9 Ga, which corresponds to the youngest period of high‐pressure metamorphism. Finally, population 5 is restricted to the hydrous retrograded granulite and represents high Y monazite growth at 1.85 Ga that is linked directly to the synkinematic garnet‐consuming hydration reaction (KFMASH): Grt + Kfs + H2O = Bt + Sil + Qtz. Two samples yield weighted mean microprobe dates for this population of 1853 ± 15 and 1851 ± 9 Ma, respectively. Subsequent xenotime growth correlates with the reaction: Grt + Sil + Qtz + H2O = Crd. We suggest that the shear zone acted as a channel for fluid produced by dehydration of metasediments in the underthrust domain.  相似文献   

20.
超高温变质作用:以华北内蒙古土贵乌拉地区为例   总被引:13,自引:0,他引:13  
刘守偈  李江海 《地学前缘》2007,14(3):131-137
超高温麻粒岩(富Mg-Al)是指温度高于900℃、压力为0.7~1.3GPa条件下形成的麻粒岩相变质岩,它记录了下地壳超高温极端变质作用的地质信息。富Mg-Al典型超高温矿物组合有:假蓝宝石+石英,尖晶石+石英,大隅石+石榴石,斜方辉石+夕线石+石英,高氟黑云母和钙镁闪石,刚玉+石英。目前世界上发现的超高温麻粒岩带(块)地区有非洲阿尔及利亚、南非、东南极、巴西中部、澳大利亚中部、印度南部和东南部等地。我们在华北克拉通北部内蒙古中南部地区孔兹岩区中发现了超高温麻粒岩,岩性主要为灰黑色条带状夕线石榴黑云片麻岩,其中含有尖晶石+石英、假蓝宝石+石英、斜方辉石+夕线石+石英以及刚玉+尖晶石+石榴石等超高温矿物组合,指示温度达1000℃,压力超过1.0GPa的变质作用。独居石定年获得了(1927±11)Ma以及(1819±11)Ma两个峰期年龄,代表变质年龄。华北克拉通北部超高温麻粒岩的发现对研究华北克拉通与哥伦比亚超大陆的演化关系有重要意义。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号