Pits and uplifts on Europa

A survey of depression and uplift features on Europa, based on Galileo regional mapping images, shows that these features come in a wide range of sizes, with numbers increasing greatly with decreasing size, down to the limits of resolution. Size distributions are similar in the northern leading and southern trailing hemispheres, where they are distinctly different from the southern leading and northern trailing hemispheres, suggesting an oblique, antipodal symmetry pattern, similar to that of chaotic and tectonic terrain. This pattern is suggestive of polar wander. Uplifts are usually polygonal or irregular in shape and rarely are cracked. Patches of chaotic terrain, which we had surveyed earlier, are not included in the current study because their topography is generally unclear, and because there is no a priori known genetic linkage with the pits and uplifts.These results contradict generalizations based on the earlier “pits, spots, and domes” (PSD) taxonomy. Most of the type examples for PSDs were simply patches of chaotic terrain selected from a limited portion of their full size range. The use of the term lenticula to collectively describe PSDs is inconsistent with the IAU definition of lenticula: a small dark spot seen at low resolution. Pits and uplifts do not correlate with lenticulae, although chaos often does. Properties of PSDs that have been widely cited as primary evidence for convective upwelling in thick ice (e.g., that uplifts are generally dome-shaped and often cracked; that pits and domes are regularly spaced; that there is a typical diameter of ∼10 km) were premature and not supported by subsequent data. Most pits and uplifts are less than 10 km across so, if they formed by diapirism or convective upwelling, the sources must have been very shallow, less than 5 km deep. How they actually formed remains unknown.     

Crack azimuths on Europa: the G1 lineament sequence revisited

The tectonic sequence in the anti-jovian area covered by regional mapping images from Galileo's orbit E15 is determined from a study of cross-cutting relationships among lineament features. The sequence is used to test earlier results from orbit G1, based on lower resolution images, which appeared to display a progressive change in azimuthal orientation over about 90° in a clockwise sense. Such a progression is consistent with expected stress variations that would accompany plausible non-synchronous rotation. The more recent data provide a more complete record than the G1 data did. We find that to fit the sequence into a continual clockwise change of orientation would require at least 1000° (>5 cycles) of azimuthal rotation. If due to non-synchronous rotation of Europa, this result implies that we are seeing back further into the tectonic record than the G1 results had suggested. The three sets of orientations found by Geissler et al. now appear to have been spaced out over several cycles, not during a fraction of one cycle. While our more complete sequence of lineament formation is consistent with non-synchronous rotation, a statistical test shows that it cannot be construed as independent evidence. Other lines of evidence do support non-synchronous rotation, but azimuths of crack sequences do not show it, probably because only a couple of cracks form in a given region in any given non-synchronous rotation period.     

Crack azimuths on Europa: time sequence in the southern leading face

The formation sequence of prominent ridges and other tectonic lineaments on the southern portion of the leading hemisphere of Europa is determined from cross-cutting relationships. These selected features formed fairly recently relative to most of the surface; older lineaments no longer retain clear evidence of cross-cutting. If we assume that this sequence represents the order of formation of cracks that underlie each lineament, and that the orientation of each crack was determined by tidal stress whose azimuth varies monotonically counter-clockwise with time, the azimuth must have rotated more than 740°, which would correspond to the change in tidal stress over two periods of nonsynchronous rotation (relative to the direction of Jupiter). However, that interpretation is not necessarily compelling, because the observed orientations of cross-cutting lineaments are not densely spaced over these cycles; in fact, the sequence would fit nearly as well into an arbitrary model with rotation in the opposite sense from that predicted by theory. This tectonic record may have formed over many more rotational cycles, such that typically only a few cracks form per cycle, which would be consistent with evidence from considerations of cycloidal crack patterns. Sets of cracks that cluster near certain azimuth orientations appear to be parts of globe-encircling lineament systems and may result from other effects, perhaps polar wander that occurred rapidly relative to nonsynchronous rotation.     

Numerical modeling of endogenic thermal anomalies on Europa

A variety of recent resurfacing features have been observed on Europa, which may produce thermal anomalies detectable by a future mission. However, the likelihood of such a detection depends on their size and lifetimes. The results of this numerical study suggest that the lifetime of a thermal anomaly associated with the emplacement of 100 m of water onto the surface of Europa is several hundred years, and ∼10 years for 10 m of water. If warm ice is emplaced on the surface instead of liquid water, these lifetimes decrease by up to a factor of two. Exploration of model parameters indicates that a thin insulating surface layer can double thermal anomaly lifetimes, anomalies emplaced at a latitude of 80° can remain detectable nearly a factor of two longer than those at equatorial latitudes, and anomalies on the night side can remain detectable for up to ∼20% longer than those on the day side. High temperatures are very short-lived as the surface ice cools very rapidly to below 200 K due to sublimation cooling. Assuming steady-state resurfacing, the number of detectable thermal anomalies associated with the emplacement of 100 m of water would be on the order of 10 if the typical resurfacing area is 15 km². If recent resurfacing is dominated by chaos regions with typical areas of 100 to 1000 km² and lifetimes of 1000 to 4000 years, the number of detectable thermal anomalies would be on the order of 1 to 10.     

On the origins of band topography, Europa

We use stereo-derived topography of extensional bands on Europa to show that these features can be elevated by 100-150 m with respect to the surroundings, and that the positive topography sometimes extends beyond the band margins. Lateral variations in shell thickness cannot maintain the observed topography for timescales greater than ∼0.1 Myr. Lateral density variations can maintain the observed topography indefinitely; mean density contrasts of 5 and 50 kg m⁻³ are required for shell thicknesses of 20 and 2 km, respectively. Density variations caused by temperature contrasts require either present-day heating or that bands are young features (<1 Myr old). Stratigraphic analyses suggest that these mechanisms are unlikely. The observation that bands form from ridges may be explained by an episode of shear-heating on ridges weakening the ridge area, and leading to strain localization during extension. Fracture porosity is likely to persist over Myr timescales in the top one-third to one-quarter of the conductive part of the ice shell. Lateral variations in this porosity (of order 20%) are the most likely mechanism for producing band topography if the ice shell is thin (≈2 km); porosity variations of 2% or less are required if the shell is thicker (≈20 km). If the ice shell is thick, lateral variations in salt content are a more likely mechanism. Warm ice will tend to lose dense, low-melting temperature phases and be buoyant relative to colder, salt-rich ice. Thus, lateral density variations will arise naturally if bands have been the sites of either localized heating or upwelling of warm ice during extension.     

Model constraints on the opening rates of bands on Europa

A mid-ocean-ridge spreading analog is used to constrain the opening rates and brittle-ductile transition depths for two axisymmetric ridged bands on Europa. Estimates of brittle-ductile transition depth based on the morphologies of Yelland and Ino Lineae are combined with a conductive cooling model based on a mid-ocean ridge analog to estimate the opening rates and active lifetimes of the bands. This model limits local strain rates to ∼¹⁰⁻¹⁵-¹⁰⁻¹² s⁻¹, opening rates to 0.2-40 mm yr⁻¹, and active lifetimes of the bands to 0.1-30 Myr. If the observed structures in the outer portions of ridged bands are indeed normal faults, the estimated range for the tensile strength of ice on Europa is 0.4-2 MPa, consistent with nonsynchronous rotation as the dominant driving mechanism for band opening.     

Segmented lineaments on Europa: Implications for the formation of ridge complexes and bright bands

We describe several segmented lineaments on Europa’s surface. These lineaments are extensive, stretching for 100s-1000s of km, and have ridge complex or bright band morphologies. The geometries of the segmented portions of these features are diagnostic of the remote normal and shear stress environment in which they formed and, therefore, constrain ridge complex and bright band formation mechanisms. Analysis of four ridge complexes indicates that they formed in a remote normal stress environment that was tensile and isotropic (or nearly so) and that these lineaments may have formed in a manner more analogous to bands on Europa than to ridges. The stress environment associated with these ridge complexes may also explain the anastomosing nature of their interior morphology. Analysis of two bright bands indicate that one formed in a remote normal stress environment that was tensile and the other was reactivated under a combination of remote tensile normal stress and remote sinistral shear stress. Aspects of the morphologies of these features also indicate that bright bands likely have complex deformation histories that can include multiple episodes of reactivation.     

Effects of plasticity on convection in an ice shell: Implications for Europa

Europa's surface exhibits numerous pits, uplifts, and disrupted chaos terrains that have been suggested to result from convection in the ice shell. To test this hypothesis, we present numerical simulations of convection in an ice shell including the effects of plasticity, which provides a simple continuum representation for brittle or semibrittle deformation along discrete fractures. Plastic deformation occurs when stresses reach a specified yield stress; at lower stresses, the fluid flow follows a Newtonian, temperature-dependent viscosity. Four distinct modes of behavior can occur. For yield stresses exceeding ∼1 bar, plastic effects are negligible and stagnant-lid convection, with no surface motion and minimal topography, results. At intermediate yield stresses, a stagnant lid forms but deforms plastically, leading to surface velocities up to several millimeters per year. Slightly smaller yield stresses allow episodic, catastrophic overturns of the upper conductive lid, with (transient) stagnant lids forming in between overturn events. The smallest yield stresses allow continual recycling of the upper lid, with simultaneous, gradual ascent of warm ice to the surface and descent of cold, near-surface ice into the interior. The exact yield stresses over which each regime occurs depend on the ice-shell thickness, melting-temperature viscosity, and activation energy for viscous creep. To form hummocky matrix and translate chaos plates by several kilometers, substantial surface strain must accompany chaos formation, and the three plasticity-dominated convection modes described here can provide such deformation. Our simulations suggest that, if yield stresses of ∼0.2-1 bar are relevant to Europa, then convection in Europa's ice shell can produce chaos-like structures at the surface. However, our simulations have difficulty explaining Europa's numerous pits and uplifts. When plasticity forces the upper lid to participate in the convection, dynamic topography of ∼50-100-m amplitude results, but the topographic structures generally have diameters of 30-100 km, an order of magnitude wider than typical pits and uplifts. None of our simulations produced isolated pits or uplifts of any diameter.     

Cycloidal cracks on Europa: Improved modeling and non-synchronous rotation implications

Cycloidal crack patterns on Europa are influenced by tides induced by orbital eccentricity, which in turn is driven by the Laplace orbital resonance. Their shapes potentially record the location of their formation (relative to the direction of Jupiter), as well as the parameters of crack formation. Hoppa et al. [Hoppa, G., Tufts, B.R., Greenberg, R., Geissler, P., 1999a. Icarus 141, 287-298] modeled several cycloid chains using a fixed set of material parameters, but some details did not fit. We now allow material parameters to vary for each arc of an observed cycloid. In general, with minimal variation of model parameters between the arcs, fits are greatly improved. Furthermore, accounting for tidal stress accumulated during non-synchronous rotation, in addition to diurnal stress, allows even better fits. Even with the added freedom in the model our fits allow us to better constrain the location where each cycloid may have formed. Our results support Hoppa et al.'s finding that only a few cracks form ridges per cycle of non-synchronous rotation in the region examined, probably because cracking relieves built up stress until further substantial rotation occurs.     

Thermal and topographic tests of Europa chaos formation models from Galileo E15 observations

Stereo topography of an area near Tyre impact crater, Europa, reveals chaos regions characterised by marginal cliffs and domical topography, rising to 100-200 m above the background plains. The regions contain blocks which have both rotated and tilted. We tested two models of chaos formation: a hybrid diapir model, in which chaos topography is caused by thermal or compositional buoyancy, and block motion occurs due to the presence of near-surface (1-3 km) melt; and a melt-through model, in which chaos regions are caused by melting and refreezing of the ice shell. None of the hybrid diapir models tested generate any melt within 1-3 km of the surface, owing to the low surface temperature. A model of ocean refreezing following melt-through gives effective elastic thicknesses and ice shell thicknesses of 0.1-0.3 and 0.5-2 km, respectively. However, for such low shell thicknesses the refreezing model requires implausibly large lateral density contrasts (50-100 kg m⁻³) to explain the elevation of the centres of the chaos regions. Although a global equilibrium ice shell thickness of ≈2 km is possible if Europa's mantle resembles that of Io, it is unclear whether local melt-through events are energetically possible. Thus, neither of the models tested here gives a completely satisfactory explanation for the formation of chaos regions. We suggest that surface extrusion of warm ice may be an important component of chaos terrain formation, and demonstrate that such extrusion is possible for likely ice parameters.     

The great thickness debate: Ice shell thickness models for Europa and comparisons with estimates based on flexure at ridges

Estimates of the thickness of the ice shell of Europa range from <1 to >30 km. The higher values are generally assumed to be estimates of the entire ice shell thickness, which may include a lower ductile layer of ice, whereas many of the smaller thickness estimates are based on analyses that only consider that portion of the ice layer that behaves elastically at a particular strain rate. One example of the latter is flexure analysis, in which the elastic ice layer is modeled as a plate or sphere that is flexed under the weight of a surface load. We present calculations based on flexure analysis in which we model the elastic ice layer as flexing under a line-load caused by ridges. We use precisely located, parallel flanking cracks as indicators of the location of greatest tensile stress induced by flexure. Our elastic thickness results are spatially variable: ∼500-2200 m (two sites) and ∼200-1000 m (one site). Thorough analysis of Europan flexure studies performed by various researchers shows that the type of model selected causes the greatest variability in the thickness results, followed by the choice of Young's modulus, which is poorly constrained for the Europan ice shell. Comparing our results to those of previously published flexure analyses for Europa, we infer spatial variability in the elastic ice thickness (at the time of load emplacement), with smooth bands having the thinnest elastic ice thickness of all areas studied. Because analysis of flexure-induced fracturing can only reveal the elastic thickness at the time of load emplacement, calculated thickness variability between features having different ages may also reflect a temporal variability in the thickness of Europa's ice shell.     

A revised model for cycloid growth mechanics on Europa: Evidence from surface morphologies and geometries

Although a single model currently exists to explain the development of curved Europan cycloids, there have been no systematic studies of the range of morphologies and quantifiable geometric parameters of cycloidal features. We address variations in geometry along individual cycloid segments, characterizing differences in cusp styles and angles, and addressing the morphologic aspects of cycloid segments and cusps. In so doing, we illustrate how geometric and morphologic evidence imply a formation mechanism that differs from the existing model in several aspects. The current model states that cycloids are initiated as tensile fractures that grow in a curved path in response to rotating diurnal tidal stresses on Europa. However, the geometry of a cycloid cusp necessitates that shear stress was resolved onto the existing cycloid segment by the rotating diurnal stresses at the instant of cusp formation. Furthermore, we observe that cycloid cusps have a strikingly similar geometry to tailcracks that developed at the tips of many ridge-like strike-slip faults on Europa in response to shearing at the fault tip. We suggest that this similarity in geometries can be attributed to an identical formation mechanism whereby cycloid cusps form by a tailcracking process. We therefore present a revised, mechanically-based model for cycloid formation that retains the basic premise that crack growth is governed by diurnal stresses, but describes the development of cycloid cusps in response to resolved shear stresses at the tips of existing cycloid segments. The ratio of normal to shear stress at the time of tailcrack formation dictates the cusp angle and, over longer time periods, influences the morphologic evolution of the cycloid segment as it is repeatedly reworked by tidal stresses.     

Cycloid crack sequences on Europa: Relationship to stress history and constraints on growth mechanics based on cusp angles

The original model developed to explain cycloidal cracks on Europa interprets cycloids as tensile fractures that grow in a curved path in response to the constantly rotating diurnal tidal stress field. Cusps form when a new cycloid crack segment propagates at an angle to the first in response to a rotation of the principal tidal stress orientation during a period of no crack growth. A recent revised model states that a cycloid cusp forms through the creation of a secondary fracture called a tailcrack at the tip of an existing cycloid segment during shearing motion induced by the rotating tidal stress field. As the tailcrack propagates away from the cusp, it becomes the next cycloid segment in the chain. The qualitative tailcrack model uniquely accounts for the normal and shear stresses that mechanically must resolve onto the tip of an existing cycloid segment at the instant of cusp formation. In this work, we provide a quantitative framework and test of the hitherto purely conceptual tailcrack model. We first present a relative age sequence inferred from geologic mapping of multiply cross-cutting cycloids in Europa's trailing hemisphere and place this into the context of the global stress history. The age sequence requires a cumulative minimum of 630° of shell reorientation due to nonsynchronous rotation to account for the observed range of orientations of cycloids of different ages. We determined the back-rotated longitudes of formation of two cycloid chain examples and used mathematical modeling of europan tidal stresses to show that the tailcrack model for cusp formation is not only viable, but places constraints on the overall development of a cycloid chain by controlling the timing of cusp development within Europa's orbit. For all cusps analyzed, the exact ratio of resolved shear to normal stress required to form the cusp angles by a process of tailcracking, as governed by the principles of linear elastic fracture mechanics, is produced at the tip of a shearing cycloid segment during Europa's orbit. Cusp formation occurs after the point in the orbit at which the maximum tensile principal tidal stress occurs, implying that tensile tidal stresses are not directly responsible for cusp development. Instead, cusps develop when a tailcrack forms at the tip of a cycloid segment in response to the highly perturbed stress field induced during concomitant opening and shearing at the tip of the cycloid segment.     

Evaluation of the possible presence of clathrate hydrates in Europa's icy shell or seafloor

Several substances besides water ice have been detected on the surface of Europa by spectroscopic sensors, including CO₂, SO₂, and H₂S. These substances might occur as pure crystalline ices, as vitreous mixtures, or as clathrate hydrate phases, depending on the system conditions and the history of the material. Clathrate hydrates are crystalline compounds in which an expanded water ice lattice forms cages that contain gas molecules. The molecular gases that may constitute Europan clathrate hydrates may have two possible ultimate origins: they might be primordial condensates from the interstellar medium, solar nebula, or jovian subnebula, or they might be secondary products generated as a consequence of the geological evolution and complex chemical processing of the satellite. Primordial ices and volatile-bearing compounds would be difficult to preserve in pristine form in Europa without further processing because of its active geological history. But dissociated volatiles derived from differentiation of a chondritic rock or cometary precursor may have produced secondary clathrates that may be present now. We have evaluated the current stability of several types of clathrate hydrates in the crust and the ocean of Europa. The depth at which the clathrates of SO₂, CO₂, H₂S, and CH₄ are stable have been obtained using both the temperatures observed in the surface [Spencer, J.R., Tamppari, L.K., Martin, T.Z., Travis, L.D., 1999. Temperatures on Europa from Galileo photopolarimeter-radiometer: Nighttime thermal anomalies. Science 284, 1514-1516] and thermal models for the crust. In addition, their densities have been calculated in order to determine their buoyancy in the ocean, obtaining different results depending upon the salinity of the ocean and type of clathrate. For instance, assuming a eutectic composition of the system MgSO₄H₂O for the ocean, CO₂, H₂S, and CH₄ clathrates would float but SO₂ clathrate would sink to the seafloor; an ocean of much lower salinity would allow all these clathrates to sink, except that CH₄ clathrate would still float. Many geological processes may be driven or affected by the formation, presence, and destruction of clathrates in Europa such as explosive cryomagmatic activity [Stevenson, D.J., 1982. Volcanism and igneous processes in small icy satellites. Nature 298, 142-144], partial differentiation of the crust driven by its clathration, or the local retention of heat within or beneath clathrate-rich layers because of the low thermal conductivity of clathrate hydrates [Ross, R.G., Kargel, J.S., 1998. Thermal conductivity of Solar System ices, with special reference to martian polar caps. In: Schmitt, B., De Berg, C., Festou, M. (Eds.), Solar System Ices. Kluwer Academic, Dordrecht, pp. 33-62]. On the surface, destabilization of these minerals and compounds, triggered by fracture decompression or heating could result in formation of chaotic terrain morphologies, a mechanism that also has been proposed for some martian chaotic terrains [Tanaka, K.L., Kargel, J.S., MacKinnon, D.J., Hare, T.M., Hoffman, N., 2002. Catastrophic erosion of Hellas basin rim on Mars induced by magmatic intrusion into volatile-rich rocks. Geophys. Res. Lett. 29 (8); Kargel, J.S., Prieto-Ballesteros, O., Tanaka K.L., 2003. Is clathrate hydrate dissociation responsible for chaotic terrains on Earth, Mars, Europa, and Triton? Geophys. Res. 5. Abstract 14252]. Models of the evolution of the ice shell of Europa might take into account the presence of clathrate hydrates because if gases are vented from the silicate interior to the water ocean, they first would dissolve in the ocean and then, if the gas concentrations are sufficient, may crystallize. If any methane releases occur in Europa by hydrothermal or biological activity, they also might form clathrates. Then, from both geological and astrobiological perspectives, future missions to Europa should carry instrumentation capable of clathrate hydrate detection.     

Resurfacing history of Europa from pole-to-pole geological mapping

We produced geologic maps from two regional mosaics of Galileo images across the leading and trailing hemispheres of Europa in order to investigate the temporal distribution of units in the visible geologic record. Five principal terrain types were identified (plains, bands, ridges, chaos, and crater materials), which are interpreted to result from (1) tectonic fracturing and lineament building, (2) cryovolcanic reworking of surface units, with possible emplacement of sub-surface materials, and (3) impact cratering. The geologic histories of both mapped areas are essentially similar and reflect some common trends: Tectonic resurfacing dominates the early geologic record with the formation of background plains by intricate superposition of lineaments, the opening of wide bands with infilling of inter-plate gaps, and the buildup of ridges and ridge complexes along prominent fractures in the ice. It also appears that lineaments are narrower and more widely spaced with time. The lack of impact craters overprinted by lineaments indicate that the degree of tectonic resurfacing decreased rapidly after ridged plains formation. In contrast, the degree of cryovolcanic resurfacing appears to increase with time, as chaos formation dominates the later parts of the geologic record. These trends, and the transition from tectonic- to cryovolcanic-dominated resurfacing could be attributed to the gradual thickening of Europa's cryosphere during the visible geologic history, that comprises the last 2% or 30-80 Myr of Europa's history: An originally thin, brittle ice shell could be pervasively fractured or melted through by tidal and endogenic processes; the degree of fracturing and plate displacements decreased with time in a thickening shell, and lineaments became narrower and more widely spaced; formation of chaos regions could have occurred where the thickness threshold for solid-state convection was exceeded, and can be aided by preferential tidal heating of more ductile ice. In a long-term context it is not clear at this point whether this inferred thickening trend would reflect a drastic change in the thermal evolution of the satellite, or cyclic or irregular episodes of tectonic and cryovolcanic activity.     

Comment on “Mechanics of tidally driven fractures in Europa's ice shell” by S. Lee, R.T. Pappalardo, and N.C. Makris [2005. Icarus 177, 367-379]

We show Lee, Pappalardo, and Makris' [2005. Icarus 177, 367-379] argument that surface cracks in Europa's icy shell penetrate 3-10 times deeper in the presence of subsurface ocean is not correct. We use numerical calculations to demonstrate that there is at most 50% increase in penetration depth for a crack opening in a shell of finite thickness compared to a half-space. We also propose a simple equation based on force balances to estimate the maximum thickness of an ice shell that can be opened under tensile stress. Our calculations show that a crack can only penetrate 330-m-thick ice shell under 200 kPa far-field tensile stress and half of that if the stress is 100 kPa. But the presence of water would allow crack penetrate ∼4.0 km into the ice shell with zero porosity.     

Strength of the lithosphere of the Galilean satellites

Several approaches have been used to estimate the ice shell thickness on Callisto, Ganymede, and Europa. Here we develop a method for placing a strict lower bound on the thickness of the strong part of the shell (lithosphere) using measurements of topography. The minimal assumptions are that the strength of faults in the brittle lithosphere is controlled by lithostatic pressure according to Byerlee's law and the shell has relatively uniform density and thickness. Under these conditions, the topography of the ice provides a direct measure of the bending moment in the lithosphere. This topographic bending moment must be less than the saturation bending moment of the yield strength envelope derived from Byerlee's law. The model predicts that the topographic amplitude spectrum decreases as the square of the topographic wavelength. This explains why Europa is rugged at shorter wavelengths (∼10 km) but extremely smooth, and perhaps conforming to an equipotential surface, at longer wavelengths (>100 km). Previously compiled data on impact crater depth and diameter [Schenk, P.M., 2002. Nature 417, 419-421] on Europa show good agreement with the spectral decrease predicted by the model and require a lithosphere thicker than 2.5 km. A more realistic model, including a ductile lower lithosphere, requires a thickness greater than 3.5 km. Future measurements of topography in the 10-100 km wavelength band will provide tight constraints on lithospheric strength.     

Experimental study on the rheological properties of polycrystalline solid nitrogen and methane: Implications for tectonic processes on Triton

To investigate the evolution of any processes on planetary surfaces in the outer Solar System, the rheological properties of non-water ices were studied by means of a sound velocity measurement system and a uniaxial deformation apparatus. A pulse transmission method was used to obtain longitudinal (V_p) and transverse (V_s) wave velocities through solid nitrogen and methane at temperatures ranging from 5 to 64 K and from 5 to 90 K, respectively. The measured velocities confirmed that the solid methane and solid nitrogen samples were non-porous polycrystalline samples without any cracks and bubbles inside. Compression tests at constant strain-rate were performed for solid nitrogen and methane at temperatures of 5-56 K and 5-77 K, respectively, at strain-rates of 10⁻⁴-10⁻² s⁻¹. Both brittle and ductile behavior was observed for solid nitrogen and methane under these conditions. The maximum strength of solid nitrogen was observed to be 9 MPa in the brittle failure mode, and that of solid methane was 10 MPa. These low strengths cannot support cantaloupe structures with the topographic undulation larger than several kilometers found on Triton’s surface, suggesting that other materials such as H₂O ice could underlay solid methane and nitrogen and support these structures.     

Thermal state and complex geology of a heterogeneous salty crust of Jupiter's satellite, Europa

The complex geology of Europa is evidenced by many tectonic and cryomagmatic resurfacing structures, some of which are “painted” into a more visible expression by exogenic alteration processes acting on the principal endogenic cryopetrology. The surface materials emplaced and affected by this activity are mainly composed of water ice in some areas, but in other places there are other minerals involved. Non-ice minerals are visually recognized by their low albedo and reddish color either when first emplaced or, more likely, after alteration by Europan weathering processes, especially sublimation and alteration by ionizing radiation. While red chromophoric material could be due to endogenic production of solid sulfur allotropes or other compounds, most likely the red substance is an impurity produced by radiation alteration of hydrated sulfate salts or sulphuric acid of mainly internal origin. If the non-ice red materials or their precursors have a source in the satellite interior, and if they are not merely trace contaminants, then they can play an important role in the evolution of the icy crust, including structural differentiation and the internal dynamics. Here we assume that these substances are major components of Europa's cryo/hydrosphere, as some models have predicted they should be. If this is an accurate assumption, then these substances should not be neglected in physical, chemical, and biological models of Europa, even if major uncertainties remain as to the exact identity, abundance, and distribution of the non-ice materials. The physical chemical properties of the ice-associated materials will contribute to the physical state of the crust today and in the geological past. In order to model the influence of them on the thermal state and the geology, we have determined the thermal properties of the hydrated salts. Our new lab data reveal very low thermal conductivities for hydrated salts compared to water ice. Lower conductivities of salty ice would produce steeper thermal gradients than in pure ice. If there are salt-rich layers inside the crust, forming salt beds over the seafloor or a briny eutectic crust, for instance, the high thermal gradients may promote endogenic geological activity. On the seafloor, bedded salt accumulations may exhibit high thermochemical gradients. Metamorphic and magmatic processes and possible niches for thermophilic life at shallow suboceanic depths result from the calculated thermal profiles, even if the ocean is very cold.