Morphology and mineralogy of weathering crusts on highly porous oolitic limestones, a case study from Budapest

Black crusts are very common on limestones in polluted urban environments, but white crusts are less frequently developed. On the soft, porous and inherently weak oolitic limestone of Budapest both crusts are frequent, and indeed white ones are more common on the stone walls of the studied fortress. In this paper, black and white crusts and the host rock have been described using morphological criteria, mineralogical analyses (XRD, DTA), elements analyses (microprobe) and micro-morphological (SEM) tests. The analyses have shown that on white crusts the surface dissolution is combined with the precipitation of gypsum and calcite in the pores and accumulation of gypsum on the underside of the crust. Thin white crusts are removed by a combination of salt crystallisation (gypsum) and frost action while very thick stone layers scale off due to freeze-thaw cycles. Black crusts are enriched in gypsum relative to white crusts. Gypsum accumulates on the crust surface and signs of dissolution have not been observed. Airborne particulates (flyash, silt-sized quartz, and organic debris) adhere to the crust surface of sheltered black crusts. These particles are later incorporated into the expanding gypsum crystals, that are visible on the underside of the crust. The host rock also contains gypsum, but it is washed off the surface when the crust is removed. Further exposure of the host rock may lead to the dissolution of calcite crystals as it is observed by SEM. The micro-environment influences the crust formation and adherence of the crusts. On frequently wet and dry surfaces crust removal is more common. The crust serves as a protective layer on the stone surface, but this protection is temporary since trigger mechanisms such as salt crystallisation or frost action can cause rapid surface loss.Special Issue: Stone decay hazards     

Age and depositional environment of the Draa Sfar massive sulfide deposit, Morocco

The Draa Sfar mineralization consists of two main stratabound orebodies, Sidi M’Barek and Tazacourt, located north and south of the Tensift River (“Oued Tessift”), respectively. Each orebody is comprised by at least two massive sulfide lenses. The hosting rocks are predominantly black shales, although minor rhyolitic rocks are also present in the footwall to the southern orebody. Shales, rhyolitic volcanic rocks, and massive sulfides are all included into the Sarhlef Series, which is recognized as one of the main stratigraphic units of the Moroccan Variscan Meseta. Hydrothermal activity related with an anomalous thermal gradient, together with a high sedimentation rate in a tectonically driven pull-apart marine basin, favored the accumulation of organic-rich mud in the deepest parts of the basin and the sedimentary environment suitable for massive sulfide deposition and preservation. This took place by replacement of the hosting unlithified wet mud below the sediment–water interface. Geochemical data suggest a sedimentary environment characterized by oxic water column and anoxic sediment pile with the redox boundary below the sediment–water interface. The low oxygen availability within the sediment pile inhibited oxidation and pyritization of pyrrhotite. Biostratigraphic analysis, based on the palynological content of the hosting black shales, restricts the age of the sulfides to the Asbian substage (mid-Mississippian). This age is consistent with earlier geochronological constraints.     

Mineral deposit formation in Phanerozoic sedimentary basins of north-east Africa: the contribution of weathering

The intra- and epicontinental basins in north-east Africa (Egypt, Sudan) bear ample evidence of weathering processes repeatedly having contributed to the formation of mineral deposits throughout the Phanerozoic.The relict primary weathering mantle of Pan-African basement rocks consists of kaolinitic saprolite, laterite (in places bauxitic) and iron oxide crust. On the continent, the reaccumulation of eroded weathering-derived clay minerals (mainly kaolinite) occurred predominantly in fluvio-lacustrine environments, and floodplain and coastal plain deposits. Iron oxides, delivered from ferricretes, accumulated as oolitic ironstones in continental and marine sediments. Elements leached from weathering profiles accumulated in continental basins forming silcrete and alunite or in the marine environment contributing to the formation of attapulgite/saprolite and phosphorites.The Early Paleozoic Tawiga bauxitic laterite of northern Sudan gives a unique testimony of high latitude lateritic weathering under global greenhouse conditions. It formed in close spatial and temporal vicinity to the Late Ordovician glaciation in north Africa. The record of weathering products is essentially complete for the Late Cretaceous/Early Tertiary. From the continental sources in the south to the marine sinks in the north, an almost complete line of lateritic and laterite-derived deposits of bauxitic kaolin, kaolin, iron oxides and phosphates is well documented.     

Mapping of groundwater quality in the Turonian aquifer of Oum Er-Rabia Basin, Morocco: a case study

This study takes the groundwater of the Moroccan limestone aquifer of Oum Er-Rabia as an example of statistical and cartographical approaches in water resources management. Statistical analyses based on frequency distribution and PCA methods revealed the homogeneity of waters with the existence of abnormal points and have helped to assess correlations between the studied variables. The mapping approach illustrated that waters are influenced by the lithology of the surrounding rocks and are of Ca–Mg–HCO₃, Ca–Mg–Cl–SO₄, and mixed types according to the Piper classification. The quality of water is of high to medium, north of the basin, but it is of medium to bad, NE and south, due to excessive contents of chloride, sulfate and nitrate. According to the US Salinity Laboratory classification, water used for irrigation in the eastern and the southern parts of the basin should take into consideration the drainage conditions, the nature of plants and the addition of gypsum doses.

The Selloum Basin: new element of the Middle Liassic paleogeography in the southern Middle Atlas (Morocco)

A comparative study of the Middle Liassic series in the south western part of the Middle Atlas system leads to the definition of three new formations called Fellat 1, 2 and 3. They mainly involve gravity-flow deposits related to the breakup of the regional carbonate platform in a subsiding area, the Selloum Basin. The creation of this basin provides evidence for a rifting stage during the Carixian–Domerian interval, inducing the separation of the Selloum unit with respect to the Middle Atlasic trough and its possible connection with the High Atlasic sedimentary domain.     

Tropical chemical weathering of hillslope deposits and bedrock source in the Aburrá Valley, northern Colombian Andes

Tropical chemical weathering produces extensive lateritization and formation of deep weathering profiles. Both processes are fundamental to landscape evolution and slope instability. The Aburrá Valley of the northern Colombian Andes is characterized by tropical conditions. The valley slopes are mostly covered by hillslope deposits originating from four basement rock suites which comprise contrasting granitoid, volcanic–sedimentary, ophiolitic, and metamorphic sources, respectively. Tropical chemical weathering of the Aburrá hillslope deposits and their respective bedrock were examined using X-ray fluorescence and X-ray diffraction analysis, to document and quantify their chemical weathering profiles, compositions, and mineralogical properties. The Chemical Index of Alteration (CIA), loss on ignition (LOI), and the Mobiles index (Imob) were used to quantify the degree of weathering of hillslope deposits and bedrock source. Weathering trends were analyzed using A–CN–K and A–CNK–FM diagrams. The material mantling the slopes in the Aburrá Valley records an intense weathering history. Chemical weathering is characterized by increased development of clay minerals (kaolinite, halloysite) and iron and aluminum sesquioxides. Lateritization characterizes the final stage of the weathering profiles. Concentrations of CaO, Na₂O, K₂O decrease markedly in the weathering products compared to the fresh bedrock source, whereas concentrations of Al₂O₃, Fe₂O₃, and MgO increase significantly. CIA ratios of matrix slope deposits derived from all four sources near 100, whereas those of boulder slope deposits and saprolites are lower, but exceed source rock values. Different A–CN–K weathering paths are evident for each lithotype, validating the correlation established between the hillslope deposits and their various parents. Chemical weathering indices in some samples are strongly influenced by the presence of sesquioxides, as reflected by high LOI, anomalously low CIA, and varying enrichment trends on the A–CNK–FM diagrams. Consequently, different chemical indices based on different criteria need to be combined to obtain best results, as illustrated here by the combination of LOI, CIA, and Imob. The overall results suggest that tropical conditions have dominated for a long time in the northern Colombian Andes, leading to uniformly high weathering indices in matrix slope deposits irrespective of parent lithotype. Prolonged warm and humid conditions could thus be responsible for the weathering and remobilization of extensive old hillslope deposits during the Quaternary. However, in addition to the influence of climatic factors, tectonism has also undoubtedly influenced slope evolution in the Aburrá Valley.     

Rock weathering on the eastern mountains of southern Africa: Review and insights from case studies

The mountains in the eastern region of southern Africa are of significant regional importance, providing for a diverse range of land use including conservation, tourism and subsistence agriculture. The higher regions are comprised of flood basalts and are immediately underlain by predominantly aeolian-origin sandstones. Our understanding of the weathering of these basalts and sandstones is reviewed here, with particular focus on the insights gained from the Lesotho Highlands Water Project and an ongoing study into the deterioration of rock art. While the chemical weathering attributes of the basalts have been substantially investigated, it is evident that the environmental surface conditions of rock moisture and temperature, as affecting weathering processes, remain largely unknown. Within the sandstones, studies pertaining to rock art deterioration present insights into the potential surface weathering processes and highlight the need for detailed field monitoring. Outside of these site-specific studies, however, little is understood of how weathering impacts on landscape development; notably absent, are detail on weathering rates, and potential effects of biological weathering. Some palaeoenvironmental inferences have also been made from weathering products, both within the basalts and the sandstones, but aspects of these remain controversial and further detailed research can still be undertaken.     

Hydrothermal alteration, fluid flow and volume change in shear zones: the layered mafic–ultramafic Kettara intrusion (Jebilet Massif, Variscan belt, Morocco)

During emplacement and cooling, the layered mafic–ultramafic Kettara intrusion (Jebilet, Morocco) underwent coeval effects of deformation and pervasive fluid infiltration at the scale of the intrusion. In the zones not affected by deformation, primary minerals (olivine, plagioclase, clinopyroxene) were partially or totally altered into Ca‐amphibole, Mg‐chlorite and CaAl‐silicates. In the zones of active deformation (centimetre‐scale shear zones), focused fluid flow transformed the metacumulates (peridotites and leucogabbros) into ultramylonites where insoluble primary minerals (ilmenite, spinel and apatite) persist in a Ca‐amphibole‐rich matrix. Mass‐balance calculations indicate that shearing was accompanied by up to 200% volume gain; the ultramylonites being enriched in Si, Ca, Mg, and Fe, and depleted in Na and K. The gains in Ca and Mg and losses in Na and K are consistent with fluid flow in the direction of increasing temperature. When the intrusion had cooled to temperatures prevailing in the country rock (lower greenschist facies), deformation was still active along the shear zones. Intense intragranular fracturing in the shear zone walls and subsequent fluid infiltration allowed shear zones to thicken to metre‐scale shear zones with time. The inner parts of the shear zones were transformed into chlorite‐rich ultramylonites. In the shear zone walls, muscovite crystallized at the expense of Ca–Al silicates, while calcite and quartz were deposited in ‘en echelon’ veins. Mass‐balance calculations indicate that formation of the chlorite‐rich shear zones was accompanied by up to 60% volume loss near the centre of the shear zones; the ultramylonites being enriched in Fe and depleted in Si, Ca, Mg, Na and K while the shear zones walls are enriched in K and depleted in Ca and Si. The alteration observed in, and adjacent to the chlorite shear zones is consistent with an upward migrating regional fluid which flows laterally into the shear zone walls. Isotopic (Sr, O) signatures inferred for the fluid indicate it was deeply equilibrated with host lithologies.     

Al_2O_3/Ti:风化与蚀变过程中的原岩示踪

Al_2O_3和Ti在风化和热液蚀变等地球化学过程中通常被认为是不活动元素,两者的比值Al_2O_3/Ti常被用来指示地球化学作用过程。通过对中国157件火成岩样品元素含量平均值的统计发现,火成岩样品中Al_2O_3/Ti与SiO_2含量值之间存在着较好的幂函数关系:ln(Al_2O_3/Ti)=0.073×SiO_2-0.89,式中Al_2O_3和SiO_2和Ti含量单位均为%。本文基于得到的经验方程和TAS图解构建了一个新的判别岩石类型的图解——Al_2O_3-Ti图解。该图解可以区分酸性岩、中酸性岩、中性岩、中基性岩-基性岩四类岩性。通过对三个火成岩风化剖面的研究发现,花岗岩风化剖面从新鲜基岩到风化形成的土壤在Al_2O_3-Ti图解中均落在酸性岩区,花岗闪长岩风化剖面从新鲜基岩到风化形成的土壤样品均落在中酸性岩区,玄武质安山岩风化剖面从新鲜基岩到风化形成的土壤样品均落在中基性岩-基性岩区。不同风化程度的风化产物与其母岩在Al_2O_3-Ti图解中所在的区域一致,即Al_2O_3-Ti图解可以用来追溯火成岩风化产物的母岩岩性。通过对胶东焦家金矿和豫西牛头沟金矿两个矿区岩石的研究发现,黑云母花岗岩从新鲜岩石到其蚀变岩及其形成矿石的样品在Al_2O_3-Ti图解中均落在酸性岩区。玄武质安山岩从新鲜岩石到其蚀变岩及其形成矿石的样品在Al_2O_3-Ti图解中均落在中基性岩-基性岩区。即不同蚀变程度的蚀变产物与其原岩在Al_2O_3-Ti图解中所在的区域一致,这表明新构建的Al_2O_3-Ti图解可以用来示踪蚀变岩的原岩性质。     

Magnetostratigraphy of the Ouarzazate Basin: Implications for the timing of deformation and mountain building in the High Atlas Mountains of Morocco.

Two magnetostratigraphic profiles (450 samples) have been carried out to constrain the age of synorogenic formations in the southern foreland of the High Atlas of Morocco. The Amekchoud profile covers the Aït Ouglif and Aït Kandoula alluvial formations that form the bulk of the Ouarzazate basin fill, indicating an age between the upper Langhian and the Messinian (Miocene). Data obtained in the previously unexplored Hadida formation profile covers the oldest terms of the foreland basin succession, but the low quality of the magnetic record only allows proposing a tentative age between the middle Lutetian and an undetermined middle to late Eocene. The correlation of the Amekchoud profile is based on the recognition of the long C5n chron (Tortonian) in the middle part of the section studied and a new vertebrate locality of upper Tortonian age found in the upper part. These results indicate a discontinuous record of foreland basin development in the southern Atlas domain from mid Eocene to late Miocene times, punctuated by an intermediate large hiatus of 20-25 ma (late Eocene to mid Miocene). Thrusting in the Sub-Atlas frontal thrust belt began before the Aït Ouglif and Kandoula formations, probably during the Oligocene, and extends up to recent times. The alternation of periods of deposition with others of no sedimentary record, which does not coincide with specific tectonic events, results probably from the interference of orogenic deformation and the mantle-related thermal uplift events that have been described for the Moroccan Atlas.     

Structural evolution of the southern Rif Cordillera (Morocco): tectonics and synsedimentary fault processes

This paper attempts to investigate the tectonics of the southern Rif Cordillera. Hydrogeological and oil well data, together with interpretation of seismic reflection lines help to characterize the architecture of the Rharb–Mamora Basin located in the frontal region of the Gibraltar Arc. The facies map constructed from the drilling data exhibits four main types of Pliocene facies: (i) conglomerates; (ii) limestones; (iii) sandstones and sands more or less rich with shelly remains; (iv) clays. The lateral variation of deposits is accompanied by thickening, which can reach a few tens of metres. Thickening of layers and lithofacies variation indicate synsedimentary faulting processes. Two major fault zones have been identified: Kenitra–Sidi Slimane Fault Zone (K2SFZ) and Rabat–Kenitra Fault Zone (RKFZ). In the western coastal area, the geometrical configuration suggests a partition into horsts and grabens in the southern part, and a system of three geological units in the northern part. The analysis and interpretation of the gravity data reveal an important gravity anomaly, referred to as the Kenitra Gravity Anomaly. It corresponds to the Hercynian faults deduced by the seismic reflection line interpretation: K2SFZ and RKFZ. From Larache to El Jadida cities, the Kenitra area represents the hinge between the positive and negative gravity values, with a major negative anomaly in the eastern part of Kenitra. Copyright © 2004 John Wiley & Sons, Ltd.     

Geochemical characteristics of modern river sediments in Myanmar and Thailand: Implications for provenance and weathering

The elemental composition of organic matter and the major and trace element compositions of stream sediments from Myanmar (Ayeyarwady and Sittaung rivers) and Thailand (Mekong and Chao Phraya rivers, and their tributaries) were determined to examine their distributions, provenance, and chemical weathering processes. Higher total organic carbon (TOC) and total nitrogen (TN) contents in the finer grained sediments indicate hydrodynamic energy may control their distributions. TOC/TN ratios indicate inputs of both aquatic macrophyte and higher vascular plant material to the river sediments. The major element abundances of the sediments are characterized by predominance of SiO₂ in coarser fractions and a marked negative correlation with Al₂O₃, representing primary grain size primarily control on SiO₂ content. Marked depletion of most labile elements (Na₂O, CaO, K₂O, Ba and Sr) relative to UCC (upper continental crust), indicate destruction of feldspar during chemical weathering in the source area or during transport. However, enrichment of some high field strength elements (Zr, Th, Ce and Y) relative to UCC and higher Zr/Sc ratios indicate moderate concentration of resistant heavy minerals in finer-grained samples. Discriminant diagrams and immobile trace element characteristics indicate that the Mekong, and Chao Phraya river sediments were largely derived from felsic sources with compositions close to typical rhyolite, dacite/granodiorite, UCC, I- and S-type granites. Relative enrichment of ferromagnesian elements (e.g. MgO, Cr, Ni) and high Cr/V and low Y/Ni ratios in Ayeyarwady and Sittaung sediments indicate the presence of a mafic or ultramafic component in their sources. The ICV (Index of Compositional Variability), CIA (Chemical Index of Alteration), PIA (Plagioclase Index of Alteration), α^Al, Rb/Sr and K₂O/Rb ratios indicate that the Ayeyarwady and Sittaung sediments record low to moderate degrees of chemical weathering in their source, compared to moderate to intense chemical weathering in the Mekong and Chao Phraya river basins. These results are compatible with existing major ion data for river waters collected at the same locations.     

Geochemistry of fine-grained clastic sedimentary rocks of the Neoproterozoic Ikorongo Group, NE Tanzania: Implications for provenance and source rock weathering

The Neoproterozoic Ikorongo Group, which lies unconformably on the late Archaean Nyanzian Supergroup of the Tanzania Craton, is comprised of conglomerates, quartzites, shales, siltstones, red sandstones with rare flagstones and gritstones and is regionally subdivided into four litho-stratigraphic units namely the Makobo, Kinenge, Sumuji and Masati Formations.We report geochemical data for the mudrocks (i.e., shales and siltstones) from the Ikorongo basin in an attempt to constrain their provenance and source rock weathering. These mudrocks are compositionally similar to PAAS and PS indicating derivation from mixed mafic–felsic sources. However, the siltstones show depletion in the transition elements (Cr, Ni, Cu, Sc and V) and attest to a more felsic protolith than those for PAAS and PS. The Chemical Index of Alteration (CIA: 52–82) reveal a moderately weathered protolith for the mudrocks. The consistent REE patterns with LREE-enriched and HREE-depleted patterns ((La/Yb)_CN = 7.3–38.3) coupled with negative Eu anomalies (Eu/Eu* = 0.71 on average), which characteristics are similar to the average PAAS and PS, illustrate cratonic sources that formed by intra-crustal differentiation.Geochemical considerations and palaeocurrent indications suggest that the provenance of the Ikorongo Group include high-Mg basaltic-andesites, dacites, rhyolites and granitoids from the Neoarchaean Musoma-Mara Greenstone Belt to the north of the Ikorongo basin. Mass balance calculations suggest relative contributions of 47%, 42% and 11% from granitoids, high-magnesium basaltic-andesites and dacites, respectively to the detritus that formed the shales. Corresponding contributions to the siltstones detritus are 53%, 43% and 4%.     

Open-coast intertidal deposits and the preservation potential of individual laminae: a case study from east-central China

Monitoring of sedimentation and erosion was conducted on an open coastal tidal flat on the southern flank of the Yangtze delta. Various elevation references were established in the intertidal zone and monitored intensively for 4 months in order to examine fortnightly and seasonal (calm weather and storm season) sedimentation and erosion. Longer term (100 years) sedimentation and preservation were investigated through examination of cores and trenches. Two different vertical grouping patterns of tidal bedding were distinguished with thinner and thicker sandy laminae. The number of sand-dominated layers and individual muddy and sandy lamina in the cores were compared with theoretically derived sedimentation rates in order to assess long-term preservation potential. Waves, especially high storm waves, have a significant influence on sedimentation and the preservation of intertidal deposits along the open-coast tidal flat. Monitoring during one season indicated that the sand-dominated layer was directly related to storm deposits, while the mud-dominated layer was deposited during calm weather conditions. The variation in sandy lamina thickness was not related to spring–neap tidal cycles during the monitoring period. The assumption of 100% preservation of sandy laminae deposited during every tidal cycle, which has been assumed in previous time-series analyses for the identification of palaeotidal periodicity, was found to be unrealistic along this open-coast tidal flat. Preservation potential decreases as temporal scale increases. During one neap–spring tidal cycle, the preservation potential of individual sandy and muddy laminae was of the order of 10%. Over a period of 100 years, the estimated preservation potential of individual laminae, including both calm weather and storm deposits, decreased to 0·2%. The 100-year preservation potential of storm-induced, sand-dominated layers was estimated to be of the order of 10%.     

A Middle Jurassic sauropod tracksite in the Argana Basin,Western High Atlas,Morocco: an example of paleoichnological heritage for sustainable geotourism

A Middle Jurassic site at Tafaytour area (Argana Basin, Morocco) with trackways of six large sauropod dinosaurs is regarded as having high scientific and touristic value. The new dinosaur track site is extremely vulnerable, and suffers from continuous degradation caused by weathering and human activity. Documentation and protection of this tracksite is still a necessity for its integration into local geotourism activities, where it may have a socio-economic impact on the local population. Taking into consideration many similar tracksites, and strata of great paleontological interest in Morocco, including the Tafaytour tracksite, the implementation of legislation for the protection of Morocco's geological heritage, especially the paleoichnological heritage, to protect against destruction, is strongly recommended. This is necessary to cement geoheritage impact, both for scientific reasons and to value add to the socio-economic activities of the local people.     

A laser ablation inductively coupled plasma mass spectrometry study of the distribution of chalcophile elements among sulfide phases in sedimentary and magmatic rocks of the Duluth Complex,Minnesota, USA

Nickel-copper sulfide deposits occur in the basal unit of the Partridge River Intrusion, Duluth Complex (Minnesota, USA). Many lines of evidence suggest that these sulfides are formed after assimilation of the proterozoic S-rich black shales, known as the Bedded Pyrrhotite Unit. In addition to S, black shales are enriched in Te, As, Bi, Sb and Sn (TABS) and the basaltic magma of the intrusion is contaminated by the partial melt of the black shales. The TABS are chalcophile and together with the platinum-group elements, Ni and Cu partitioned into the magmatic sulfide liquid that segregated from the Duluth magma. The TABS are important for the formation of platinum-group minerals (PGM) thus their role during crystallization of the base metal sulfide minerals could affect the distribution of the PGE. However, the concentrations of TABS in magmatic Ni-Cu-PGE deposits and their distribution among base metal sulfide minerals are poorly documented. In order to investigate whether the base metal sulfide minerals host TABS in magmatic Ni-Cu-PGE deposits, a petrographic and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) study has been carried out on base metal sulfide and silicate phases of the Partridge River Intrusion, Duluth Complex.Petrographic observations showed that the proportions of the base metal sulfide minerals vary with rock type. The sulfide assemblage of the least metamorphosed Bedded Pyrrhotite Unit from outside the contact metamorphic aureole consists of pyrite with minor pyrrhotite plus chalcopyrite (<5%), whereas within the contact aureole the sulfide assemblage of the Bedded Pyrrhotite Unit rocks consists dominantly of pyrrhotite (>95%) with small amount of chalcopyrite (<2%). The sulfide mineral assemblage in the xenoliths of the Bedded Pyrrhotite Unit and in the mafic rocks of the basal unit contains two additional sulfides, pentlandite and cubanite.Our LA-ICP-MS study shows that sulfides of the Bedded Pyrrhotite Unit are rich in TABS; consistent with these S-rich black shales being the source of TABS that contaminated the mafic magma. Most of the TABS are associated with sulfides and platinum-group minerals in the rocks of the Bedded Pyrrhotite Unit from the contact aureole, the Bedded Pyrrhotite Unit xenoliths and the mafic rocks of the Duluth Complex. In addition to these phases the laser maps show that silicate phases, i.e., orthopyroxene and plagioclase contain Sn and Pb respectively. In contrast, in the least metamorphosed samples of the Bedded Pyrrhotite Unit from outside the contact aureole although the pyrite contains some TABS mass balance calculations indicates that most the TABS are contained in other phases. In these rocks, galena hosts significant amounts of Te, Bi, Sb, Sn and Ag and few very small grains of Sb-rich phases were also observed. The host phases for As were not established but possibly organic compounds may have contributed.     

Calcareous nannofossil biostratigraphy and paleoecology of the Cenomanian – Turonian transition in the Tarfaya Basin, southern Morocco

An abundant and diverse nannoflora occurs across the Cenomanian/Turonian (C/T) boundary at Tazra in the Tarfaya Basin of southern Morocco. The nannoflora of this sequence permits recognition of three biozones (CC10-CC12), three subzones (CC10a, CC10b and CC10c), and thirteen important nannolith bioevents previously reported from this interval elsewhere. The floral record shows erratic species abundance fluctuations that clearly vary with lithology and reflect at least in part preservational bias and diagenetic processes. In general, four dissolution resistant taxa are dominant: Watznaueria barnesae, Eiffellithus turriseiffelii, Eprolithus floralis, and Zeugrhabdotus spp. The late Cenomanian Zone CC10 marks a rapid excursion in ∂¹³C and is characterized by the successive extinction of four taxa, which are widely recognized as reliable biomarkers: Corollithion kennedyi, Axopodorhabdus albianus, Lithraphidites acutus, and Helenea chiastia. This interval is also marked by high species richness and high abundance of the tropical species Watznaueria barnesae, suggesting warm tropical waters. The subsequent ∂¹³C plateau and organic carbon-rich black shale deposition of the oceanic anoxic event (OAE2) is characterized by low species richness, but high nannofossil abundance, and peak abundance of the cool water and high productivity indicator Zeugrhabdotus spp., followed by the first peak abundance of cool water Eprolithus floralis. This interval correlates with the planktic foraminiferal diversity minimum and the Heterohelix shift, which marks the expansion of the oxygen minimum zone (OMZ). The C/T boundary is identified based on the FO of Quadrum gartneri, which is <1 m below the FO of the planktic foraminifer C/T marker Helvetoglobotruncana helvetica. In the early and middle Turonian, the two dominant species, tropical W. barnesae and cool water E. floralis, alternate in abundance and suggest fluctuating climatic conditions.     

Relationships between major and trace elements during weathering processes in a sedimentary context: Implications for the nature of source rocks in Douala,Littoral Cameroon

In Douala (Littoral Cameroon), the Cretaceous to Quaternary formation composed of marine to continental sediments are covered by ferrallitic soils. These sediments and soils have high contents of SiO₂ (≥70.0 wt%), intermediate contents of Al₂O₃ (11.6–28.4 wt%), Fe₂O₃ (0.00–20.5 wt%) and TiO₂ (0.04–4.08 wt%), while K₂O (≤0.18 wt%), Na₂O (≤0.04 wt%), MgO (≤0.14 wt%) and CaO (≤0.02 wt%) are very low to extremely low. Apart from silica, major oxides and trace elements (REE included) are more concentrated in the fine fraction (<62.5 μm) whose proportions of phyllosilicates and heavy minerals are significant. The close co-associations between Zr, Hf, Th and ∑REE in this fraction suggest that REE distribution is controlled by monazite and zircon. CIA values indicate intense weathering. Weathering products are characterized by the association Al₂O₃ and Ga in kaolinite; the strong correlation between Fe₂O₃ and V in hematite and goethite; the affinity of TiO₂ with HFSE (Hf, Nb, Th, Y and Zr) in heavy minerals. The ICV values suggest mature sediments. The PCI indicates a well-drained environment whereas U/Th and V/Cr ratios imply oxic conditions. La/Sc, La/Co, Th/Cr, Th/Sc and Eu/Eu* elemental ratios suggest a source with felsic components. Discrimination diagrams are consistent with the felsic source. The REE patterns of some High-K granite and granodiorite of the Congo Craton resemble those of the samples, indicating that they derive from similar source rocks.     

An experimental study on felsic rock–artificial seawater interaction: implications for hydrothermal alteration and sulfate formation in the Kuroko mining area of Japan

Experimental studies on the interactions between artificial seawater (ASW) and fresh rhyolite, perlite and weakly altered dacitic tuff containing a small amount of smectite suggest changing cation transfer during smectite-forming processes. Initially, dissolution of K from the rocks accompanies incorporation of Mg and Ca from ASW during both earlier (devitrification stage) and later smectite formation, whereas Ca incorporated with early smectite formation redissolves with progressive reaction. Barium mobility increases toward the later smectite-forming reactions. Therefore, the large amounts of barite, anhydrite and gypsum in Kuroko ore deposits are considered to have precipitated from hydrothermal solutions derived from the interaction with previously altered felsic rocks during late smectite formation, rather than by the reaction with fresh felsic rocks.Editorial handling: D. Lentz