Zinc complexation in aqueous sulfide solutions: Determination of the stoichiometry and stability of complexes via ZnS(cr) solubility measurements at 100 °C and 150 bars

The solubility of ZnS_(cr) was measured at 100 °C, 150 bars in sulfide solutions as a function of sulfur concentration (m(S_total) = 0.02-0.15) and acidity (pH_t = 2-11). The experiments were conducted using a Ti flow-through hydrothermal reactor enabling the sampling of large volumes of solutions at experimental conditions, with the subsequent concentration and determination of trace quantities of Zn. Prior to the experiments, a long-term in situ conditioning of the solid phase was performed in order to attain the reproducible Zn concentrations (i.e. solubilities). The ZnS_(cr) solubility product was monitored in the course of the experiment. The following species were found to account for Zn speciation in solution: Zn²⁺ (pH_t < 3), (pH_t 3-4.5), (pH_t 5-8), and ZnS(HS)⁻ (pH_t > 8) (pH_t predominance regions are given for m(S_total) = 0.1). Solubility data collected in this study at pH_t > 3 were combined with the ZnS_(cr) solubility product determined at lower pH to yield the following equilibrium constants (t = 100 °C, P = 150 bars):

     

Uranophane dissolution and growth in CaCl2-SiO2(aq) test solutions

The dissolution and growth of uranophane [Ca(UO₂)₂(SiO₃OH)₂·5H₂O] have been examined in Ca- and Si-rich test solutions at low temperatures (20.5 ± 2.0 °C) and near-neutral pH (∼6.0). Uranium-bearing experimental solutions undersaturated and supersaturated with uranophane were prepared in matrices of ∼10⁻² M CaCl₂ and ∼10⁻³ M SiO₂(aq). The experimental solutions were reacted with synthetic uranophane and analyzed periodically over 10 weeks. Interpretation of the aqueous solution data permitted extraction of a solubility constant for the uranophane dissolution reaction and standard state Gibbs free energy of formation for uranophane ( kJ mol⁻¹).     

Surface properties, solubility and dissolution kinetics of bamboo phytoliths

Although phytoliths, constituted mainly by micrometric opal, exhibit an important control on silicon cycle in superficial continental environments, their thermodynamic properties and reactivity in aqueous solution are still poorly known. In this work, we determined the solubility and dissolution rates of bamboo phytoliths collected in the Réunion Island and characterized their surface properties via electrophoretic measurements and potentiometric titrations in a wide range of pH. The solubility product of “soil” phytoliths ( at 25 °C) is equal to that of vitreous silica and is 17 times higher than that of quartz. Similarly, the enthalpy of phytoliths dissolution reaction is close to that of amorphous silica but is significantly lower than the enthalpy of quartz dissolution. Electrophoretic measurements yield isoelectric point pH_IEP = 1.2 ± 0.1 and 2.5 ± 0.2 for “soil” (native) and “heated” (450 °C heating to remove organic matter) phytoliths, respectively. Surface acid-base titrations allowed generation of a 2-pK surface complexation model. Phytoliths dissolution rates, measured in mixed-flow reactors at far from equilibrium conditions at 2 ? pH ? 12, were found to be intermediate between those of quartz and vitreous silica. The dissolution rate dependence on pH was modeled within the concept of surface coordination theory using the equation:

     

Kinetics of Fe(III) precipitation in aqueous solutions at pH 6.0-9.5 and 25 °C

The kinetics of Fe(III) precipitation in synthetic buffered waters have been investigated over the pH range 6.0-9.5 using a combination of visible spectrophotometry, ⁵⁵Fe radiometry combined with ion-pair solvent extraction of chelated iron and numerical modeling. The rate of precipitation, which is first order with respect to both dissolved and total inorganic ferric species, varies by nearly two orders of magnitude with a maximum rate constant of 16 ± 1.5 × 10⁶ M⁻¹ s⁻¹ at a pH of around 8.0. Our results support the existence of the dissolved neutral species, Fe(OH)₃⁰, and suggest that it is the dominant precursor in Fe(III) polymerization and subsequent precipitation at circumneutral pH. The intrinsic rate constant of precipitation of Fe(OH)₃⁰ was calculated to be allowing us to predict rates of Fe(III) precipitation in the pH range 6.0-9.5. The value of this rate constant, and the variation in the precipitation rate constant over the pH range considered, are consistent with a mechanism in which the kinetics of iron precipitation are controlled by rates of water exchange in dissolved iron hydrolysis species.     

The problem of inherited Ar* in dating impact glass by the Ar/Ar method: Evidence from the Tswaing impact crater (South Africa)

The Tswaing meteorite impact crater is a 1.13 km diameter structure located in the 2.05 Ga Nebo granite of the Bushveld Complex. The impact age had previously been determined by fission track dating to 220 ± 104 ka. ⁴⁰Ar/³⁹Ar step-heating and total fusion experiments performed on single- and multi-grain impact glass aliquots gave apparent ages ranging from 1.0 ± 0.3 Ma to 204 ± 6 Ma. These “ages” indicate that the radiogenic Ar derived from the target rocks has not been completely degassed as a result of the impact process, despite fusion of the target material. Results of step-heating experiments imply that the trapped within the glass is located in two distinct reservoirs thought to be the glass matrix and fluid/vapor inclusions (or un-melted residual clasts). Calculations assuming an age of 0.2 ± 0.1 Ma for Tswaing (fission track data) reveal that the amount of inherited ⁴⁰Ar*() relative to the pre-impact concentration varies from 0.015% to 4.15%. The spread defined by likely reflects the various quench rates experienced by the glass, most certainly due to the pre-impact position of the sample relative to the center of the crater. We compare the influence of on the apparent ⁴⁰Ar/³⁹Ar age determination of five impact structures. Our calculations show that the main characteristic controlling the age offset (for a given proportion of ) is the age difference between the impact and the target rocks (i.e., the ⁴⁰Ar* concentration in the target rock). The buffer effect for a given crater structure can be predicted knowing the age of the basement and having a rough estimation of the age of the crater structure itself. The occurrence of is likely influenced by (1) the degree of polymerization (i.e., silicate structure complexity) of the target rock and presumably related to the diffusivity of Ar in the melt and glass, (2) the Ar partial pressure at the grain boundary, (3) the quantity of energy involved in the impact, and (4) the porosity of the target rocks. For glass that inevitably suffers inherited and/or excess ⁴⁰Ar*, the use of the inverse isochron technique can be appropriate but should be applied with careful statistical treatment.     

Carbon solubility in core melts in a shallow magma ocean environment and distribution of carbon between the Earth’s core and the mantle

The solubility of carbon in Fe and Fe-5.2 wt.% Ni melts, saturated with graphite, determined by electron microprobe analysis of quenched metal melts was 5.8 ± 0.1 wt.% at 2000 °C, 6.7 ± 0.2 wt.% at 2200 °C, and 7.4 ± 0.2 wt.% at 2410 °C at 2 GPa, conditions relevant for core/mantle differentiation in a shallow magma ocean. These solubilities are slightly lower than low-pressure literature values and significantly beneath calculated values for even higher pressures [e.g., Wood B. J. (1993) Carbon in the core. Earth Planet. Sci. Lett.117, 593-607]. The trend of C solubility versus temperature for Fe-5.2 wt.% Ni melt, within analytical uncertainties, is similar to or slightly lower (∼0.2-0.4 wt.%) than that of pure Fe. Carbon content of core melts and residual mantle silicates derived from equilibrium batch or fractional segregation of core liquids and their comparison with our solubility data and carbon content estimate of the present day mantle, respectively, constrain the partition coefficient of carbon between silicate and metallic melts, in a magma ocean. For the entire range of possible bulk Earth carbon content from chondritic to subchondritic values, of 10⁻⁴ to 1 is derived. But for ∼1000 ppm bulk Earth carbon, is between 10⁻² and 1. Using the complete range of possible for a magma ocean at ∼2200 °C, we predict maximum carbon content of the Earth’s core to be ∼6-7 wt.% and a preferred value of 0.25 ± 0.15 wt.% for a bulk Earth carbon concentration of ∼1000 ppm.     

Silicon isotopic fractionation during adsorption of aqueous monosilicic acid onto iron oxide

The quantification of silicon isotopic fractionation by biotic and abiotic processes contributes to the understanding of the Si continental cycle. In soils, light Si isotopes are selectively taken up by plants, and concentrate in secondary clay-sized minerals. Si can readily be retrieved from soil solution through the specific adsorption of monosilicic acid () by iron oxides. Here, we report on the Si-isotopic fractionation during adsorption on synthesized ferrihydrite and goethite in batch experiment series designed as function of time (0-504 h) and initial concentration (ic) of Si in solution (0.21-1.80 mM), at 20 °C, constant pH (5.5) and ionic strength (1 mM). At various contact times, the δ²⁹Si vs. NBS28 compositions were determined in selected solutions (ic = 0.64 and 1.06 mM Si) by MC-ICP-MS in dry plasma mode with external Mg doping with an average precision of ±0.08‰ (±2σ_SEM). Per oxide mass, ferrihydrite (74-86% of initial Si loading) adsorbed more Si than goethite (37-69%) after 504 h of contact over the range of initial Si concentration 0.42-1.80 mM. Measured against its initial composition (δ²⁹Si = +0.01 ± 0.04‰ (±2σ_SD)), the remaining solution was systematically enriched in ²⁹Si, reaching maximum δ²⁹Si values of +0.70 ± 0.07‰ for ferrihydrite and +0.50 ± 0.08‰ for goethite for ic 1.06 mM. The progressive ²⁹Si enrichment of the solution fitted better a Rayleigh distillation path than a steady state model. The fractionation factor ²⁹ε (±1σ_SD) was estimated at −0.54 ± 0.03‰ for ferrihydrite and −0.81 ± 0.12‰ for goethite. Our data imply that the sorption of onto synthetic iron oxides produced a distinct Si-isotopic fractionation for the two types of oxide but in the same order than that generated by Si uptake by plants and diatoms. They further suggest that the concentration of light Si isotopes in the clay fraction of soils is partly due to sorption onto secondary clay-sized iron oxides.     

Determination of Sr and Ba partition coefficients between apatite from fish (Sparus aurata) and seawater: The influence of temperature

The Sr/Ca and Ba/Ca ratios in inorganic apatite are strongly dependent on the temperature of the aqueous medium during precipitation. If valid in biogenic apatite, these thermometers would offer the advantage of being more resistant to diagenesis than those calibrated on biogenic calcite and aragonite. We have reared seabreams (Sparus aurata) in tanks with controlled conditions during experiments lasting for more than 2 years at 13, 17, 23 and 27 °C, in order to determine the variations in Sr and Ba partitioning relative to Ca (D^Sr and D^Ba, respectively) between seawater and fish apatitic hard tissues (i.e. teeth and bones), as a function of temperature. The sensitivity of the Sr and Ba thermometers (i.e. ∂D^Sr/∂T and ∂D^Ba/∂T, respectively), are similar in bone (/∂T = 0.0036 ± 0.0003 and /∂T = 0.0134 ± 0.0026, respectively) and enamel (/∂T = 0.0037 ± 0.0005 and /∂T = 0.0107 ± 0.0026, respectively). The positive values of ∂D^Sr/∂T and ∂D^Ba/∂T in bone and enamel indicate that D^Sr and D^Ba increase with increasing temperature, a pattern opposite to that observed for inorganic apatite. This distinct thermodependent trace element partitioning between inorganic and organic apatite and water highlights the contradictory effects of the crystal-chemical and biological controls on the partitioning of Ca, Sr and Ba in vertebrate organisms. Taking into account the diet Sr/Ca and Ba/Ca values, it is shown that the bone Ba/Ca signature of fish can be explained by Ca-biopurification and inorganic apatite precipitation, whereas both of these processes fail to predict the bone Sr/Ca values. Therefore, the metabolism of Ca as a function of temperature still needs to be fully understood. However, the biogenic Sr thermometer is used to calculate an average seawater temperature of 30.6 °C using the Sr/Ca compositions of fossil shark teeth at the Cretaceous/Tertiary boundary, and a typical seawater Sr/Ca ratio of 0.02. Finally, while the present work should be completed with data obtained in natural contexts, it is clear that Sr/Ca and Ba/Ca ratios in fossil biogenic apatite already constitute attractive thermometers for marine paleoenvironments.     

The effect of sulfur on the partitioning of Ni and other first-row transition elements between olivine and silicate melt

The effect of sulfur dissolved as sulfide (S²⁻) in silicate melts on the activity coefficients of NiO and some other oxides of divalent cations (Ca, Cr, Mn, Fe and Co) has been determined from olivine/melt partitioning experiments at 1400 °C in six melt compositions in the system CaO-MgO-Al₂O₃-SiO₂ (CMAS), and in derivatives of these compositions at 1370 °C, obtained from the six CMAS compositions by substituting Fe for Mg (FeCMAS). Amounts of S²⁻ were varied from zero to sulfide saturation, reaching 4100 μg g⁻¹ S in the most sulfur-rich silicate melt. The sulfide solubilities compare reasonably well with those predicted from the parameterization of the sulfide capacity of silicate melts at 1400 °C of O’Neill and Mavrogenes (2002), although in detail systematic deviations indicate that a more sophisticated model may improve the prediction of sulfide capacities.The results show a barely discernible effect of S²⁻ in the silicate melt on Fe, Co and Ni partition coefficients, and also surprisingly, a tiny but resolvable effect on Ca partitioning, but no detectable effect on Cr, Mn or some other lithophile incompatible elements (Sc, Ti, V, Y, Zr and Hf). Decreasing Mg# of olivine (reflecting increasing FeO in the system) has a significant influence on the partitioning of several of the divalent cations, particularly Ca and Ni. We find a remarkably systematic correlation between and the ionic radius of M²⁺, where M = Ca, Cr, Mn, Fe, Co or Ni, which is attributable to a simple relationship between size mismatch and excess free energies of mixing in Mg-rich olivine solid solutions.Neither the effect of S²⁻ nor of Mg#^ol is large enough by an order of magnitude to account for the reported variations of obtained from electron microprobe analyses of olivine/glass pairs from mid-ocean ridge basalts (MORBs). Comparing these MORB glass analyses with the Ni-MgO systematics of MORB from other studies in the literature, which were obtained using a variety of analytical techniques, shows that these electron microprobe analyses are anomalous. We suggest that the reported variation of with S content in MORB is an analytical artifact.Mass balance of melt and olivine compositions with the starting compositions shows that dissolved S²⁻ depresses the olivine liquidus of haplobasaltic silicate melts by 5.8 × 10⁻³ (±1.3 × 10⁻³) K per μg g⁻¹ of S²⁻, which is negligible in most contexts. We also present data for the partitioning of some incompatible trace elements (Sc, Ti, Y, Zr and Hf) between olivine and melt. The data for Sc and Y confirm previous results showing that and decrease with increasing SiO₂ content of the melt. Values of average 0.01 with most falling in the range 0.005-0.015. Zr and Hf are considerably more incompatible than Ti in olivine, with and about 10⁻³. The ratio / is well constrained at 0.611 ± 0.016.     

Arsenic, iron and sulfur co-diagenesis in lake sediments

Profiles of porewater pH and dissolved As, Fe, Mn, sulfate, total sulfide (ΣS^−II), total zero-valent sulfur (ΣS⁰), organic carbon and major ion concentrations, as well as those of solid As, acid-volatile sulfide (AVS), total S, Fe, Mn, Al, organic C, ²¹⁰Pb and ¹³⁷Cs were determined in the sediment of four lakes spanning a range of redox and geochemical conditions. An inverse modeling approach, based on a one-dimensional transport-reaction equation assuming steady-state, was applied to the porewater As profiles and used to constrain the net rates of reactions involving As (). The model defines depth intervals where As is either released to (positive ) or removed from (negative ) the porewaters.At two of the sites, whose bottom water were oxygenated at sampling time, a production zone ( = 12 × 10⁻¹⁸ mol cm⁻³ s⁻¹-71 × 10⁻¹⁸ mol cm⁻³ s⁻¹) is inferred a few cm below the sediment-water interface, coincident with sharp porewater As and Fe peaks that indicate an intense coupled recycling of As and Fe. This process is confirmed by solid As and Fe maxima just below the sediment surface. In these two lakes a zone of As consumption ( = −5 × 10⁻¹⁸ mol cm⁻³ s⁻¹ to −53 × 10⁻¹⁸ mol cm⁻³ s⁻¹), attributed to the slow adsorption of As to authigenic Fe oxyhydroxides, occurs just above the production zone. A second-order rate constant of 0.12 ± 0.03 cm³ mol⁻¹ s⁻¹ is estimated for this adsorption reaction.Such features in the porewater and solid profiles were absent from the two other lakes that develop a seasonally anoxic hypolimnion. Thermodynamic calculations indicate that the porewaters of the four lakes, when sulfidic (i.e., ΣS^−II ? 0.1 μM), were undersaturated with respect to all known solid As sulfides; the calculation also predicts the presence of As^V oxythioanions in the sulfidic waters, as suggested by a recent study. In the sulfidic waters, the removal of As ( = −1 × 10⁻¹⁸ mol cm⁻³ s⁻¹ to −23 × 10⁻¹⁸ mol cm⁻³ s⁻¹) consistently occurred when saturation, with respect to FeS_(s), was reached and when As^V oxythioanions were predicted to be significant components of total dissolved As. This finding has potential implications for As transport in other anoxic waters and should be tested in a wider variety of natural environments.     

The partitioning behavior of silver in a vapor-brine-rhyolite melt assemblage

The partitioning of silver in a sulfur-free rhyolite melt-vapor-brine assemblage has been quantified at 800 °C, pressures of 100 and 140 MPa and f_O2≈NNO (nickel-nickel oxide). Silver solubility (±2σ) in rhyolite increases 5-fold from 105 ± 21 to 675 ± 98 μg/g as pressure increases from 100 to 140 MPa. Nernst-type partition coefficients describing the mass transfer of silver at 100 MPa between vapor and melt, brine and melt and vapor and brine are 32 ± 30, 1151 ± 238 and 0.026 ± 0.004, respectively. At 140 MPa, values for for vapor and melt, brine and melt, and vapor and brine are 32 ± 10, 413 ± 172 and 0.06 ± 0.03, respectively. Apparent equilibrium constant values (±2σ) describing the exchange of silver and sodium between vapor and melt, , at 100 and 140 MPa are 105 ± 68 and 14 ± 6. The average values (±2σ) for silver and sodium exchange between brine and melt, , at 100 and 140 MPa are 313 ± 288 and 65 ± 12. These data indicate that the mass transfer of silver from rhyolite melt to an exsolved volatile phase(s) is enhanced at 100 MPa relative to 140 MPa, suggesting that decompression increases the silver ore-generative potential of an evolving silicate magma. Model calculations using the new data suggest that the evolution of low-density, aqueous fluid (i.e., vapor) may be responsible for the the silver tonnage of many porphyry-type and perhaps epithermal-type ore deposits. For example, Halter et al. (Halter W. E., Pettke T. and Heinrich C. A. (2002) The origin of Cu/Au ratios in porphyry-type ore deposits. Science296, 1842-1844) used detailed silicate and sulfide melt inclusion and vapor and brine fluid inclusions analyses to estimate a melt volume on the order of 15 km³ to satisfy the copper budget at the Bajo de la Alumbrera copper-, gold-, silver-ore deposit. Using their melt volume estimate with the data presented here, model calculations for a 15-km³ felsic melt, saturated with pyrrhotite and magnetite, suggest that a low-salinity magmatic vapor may scavenge on the order of 7 × 10¹² g of silver from the melt. This quantity of silver exceeds the discovered 2 × 10⁹ g of Ag at Alumbrera. Calculated tonnages for numerous other deposits yield similar results. The excess silver in the vapor, remaining after porphyry formation, is then available to precipitate at lower PTconditions in the stratigraphically higher epithermal environment. These data suggest that silver, and perhaps other ore metals, in the porphyry-epithermal continuum may be derived solely from the time-integrated flux of dominantly low-salinity vapor exsolved from a series of sequential magma batches.     

Copper partitioning in a melt-vapor-brine-magnetite-pyrrhotite assemblage

The effect of sulfur on the partitioning of Cu in a melt-vapor-brine ± magnetite ± pyrrhotite assemblage has been quantified at 800 °C, 140 MPa, f_O2 = nickel-nickel oxide (NNO), logf_S2=-3.0 (i.e., on the magnetite-pyrrhotite curve at NNO), logf_H2S=-1.3 and logf_SO2=-1. All experiments were vapor + brine saturated. Vapor and brine fluid inclusions were trapped in silicate glass and self-healed quartz fractures. Vapor and brine are dominated by NaCl, KCl and HCl in the S-free runs and NaCl, KCl and FeCl₂ in S-bearing runs. Pyrrhotite served as the source of sulfur in S-bearing experiments. The composition of fluid inclusions, glass and crystals were quantified by laser-ablation inductively coupled plasma mass spectrometry. Major element, chlorine and sulfur concentrations in glass were quantified by using electron probe microanalysis. Calculated Nernst-type partition coefficients (±2σ) for Cu between melt-vapor, melt-brine and vapor-brine are , , and , respectively, in the S-free system. The partition coefficients (±2σ) for Cu between melt-vapor, melt-brine and vapor-brine are , , and , respectively, in the S-bearing system. Apparent equilibrium constants (±1σ) describing Cu and Na exchange between vapor and melt and brine and melt were also calculated. The values of are 34 ± 21 and 128 ± 29 in the S-free and S-bearing runs, respectively. The values of are 33 ± 22 and60 ± 5 in the S-free and S-bearing runs, respectively. The data presented here indicate that the presence of sulfur increases the mass transfer of Cu into vapor from silicate melt. Further, the nearly threefold increase in suggests that Cu may be transported as both a chloride and sulfide complex in magmatic vapor, in agreement with hypotheses based on data from natural systems. Most significantly, the data demonstrate that the presence of sulfur enhances the partitioning of Cu from melt into magmatic volatile phases.     

An experimental study of Cobalt (II) complexation in Cl and H2S-bearing hydrothermal solutions

The speciation of cobalt (II) in Cl⁻ and H₂S-bearing solutions was investigated spectrophotometrically at temperatures of 200, 250, and 300 °C and a pressure of 100 bars, and by measuring the solubility of cobaltpentlandite at temperatures of 120-300 °C and variable pressures of H₂S. From the results of these experiments, it is evident that CoHS⁺ and predominate in the solutions except at 150 °C, for which the dominant chloride complex is CoCl₃⁻. The logarithms of the stability constant for CoHS⁺ show moderate variation with temperature, decreasing from 6.24 at 120 °C to 5.84 at 200 °C, and increasing to 6.52 at 300 °C. Formation constants for chloride species increase smoothly with temperature and at 300°C their logarithms reach 8.33 for , 6.44 for CoCl₃⁻, 4.94 to 5.36 for , and 2.42 for CoCl⁺. Calculations based on the composition of a model hydrothermal fluid (Ksp-Mu-Qz, KCl = 0.25 m, NaCl = 0.75 m, ΣS = 0.3 m) suggest that at temperatures ?200 °C, cobalt occurs dominantly as CoHS⁺, whereas at higher temperatures the dominant species is .