Short‐term changes in the plan shape of a sandy beach in response to sheltering by a nearshore mud bank,Cayenne, French Guiana

Montjoly is a headland‐bound embayed sandy beach in Cayenne, French Guiana, that shows long‐term plan shape equilibrium in spite of periodic changes in accretion and erosion that alternately affect either end of the beach. These changes are caused by mud banks that move alongshore from the Amazon. The mechanisms involved in changes in the plan shape of the beach in response to the passage of one of these mud banks were monitored between 1997 and 2000 from airborne video imagery and field work. The beach longshore drift to the northwest, driven by the incident easterly to northeasterly swell usually affecting this coast, became temporarily reversed as the mud bank, migrating from east to west, initially sheltered the southeastern end of the beach. The difference in exposure to waves engendered a negative wave height gradient alongshore towards the southeast, resulting in the setting up of a cell circulation and counter‐active longshore drift from the exposed northwestern sector to the southeast. Sand eroded from the exposed sector accumulated first in the southeastern, and then the central sectors of the beach. The effect of increasing beach sheltering by the mudbank moving west is highlighted on the videographs by an ‘arrested’ pattern of beach shoreline development. The videographs show hardly any changes in beach plan shape since January 1999, due to sheltering of the beach from wave attack by the mud bank. It is expected that the eroded sector will recover in the future as the mud bank passes, leading to re‐establishment of the northwesterly sand drift. This temporally phased bi‐directional drift within the confines of the bounding headlands results in a rare example of mud‐bank‐induced beach rotation, and probably explains the long‐term equilibrium plan shape of Montjoly beach. Copyright © 2002 John Wiley & Sons, Ltd.     

Short‐term intertidal bar mobility on a ridge‐and‐runnel beach,Merlimont, northern France

Digital elevation models and topographic pro?les of a beach with intertidal bar and trough (ridge‐and‐runnel) morphology in Merlimont, northern France, were analysed in order to assess patterns of cross‐shore and longshore intertidal bar mobility. The beach exhibited a pronounced dual bar–trough system that showed cross‐shore stationarity. The bars and troughs were, however, characterized by signi?cant longshore advection of sand under the in?uence of suspension by waves and transport by strong tide‐ and wind‐driven longshore currents. Pro?le changes were due in part to the longshore migration of medium‐sized bedforms. The potential for cross‐shore bar migration appears to be mitigated by the large size of the two bars relative to incident wave energy, which is modulated by high vertical tidal excursion rates on this beach due to the large tidal range (mean spring tidal range = 8·3 m). Cross‐shore bar migration is also probably hindered by the well‐entrenched troughs which are maintained by channelled high‐energy intertidal ?ows generated by swash bores and by tidal discharge and drainage. The longshore migration of intertidal bars affecting Merlimont beach is embedded in a regional coastal sand transport pathway involving tidal and wind‐forced northward residual ?ows affecting the rectilinear northern French coast in the eastern English Channel. Copyright © 2004 John Wiley & Sons, Ltd.     

Dynamics of intertidal drainage channels on a multi‐barred macrotidal beach

The intertidal drainage channels on a macrotidal bar–trough (ridge‐and‐runnel) beach were monitored during a 17‐day survey. Type 1 channels were persistent, dominantly longshore systems essentially limited to the wide intertidal zone between mean high and low water neap tidal levels. The cumulative length of this channel type fluctuated as a function of topographically controlled through‐flow or flow impedance in troughs, and showed no correlation with the semi‐lunar tidal cycle. Smaller, ephemeral type 2 channels appeared as dominantly cross‐shore systems incising bars on the narrower upper and lower beach zones during spring tides. They disappeared during neap tides through infill by waves and aeolian activity. The only significant phase of type 1 channel mobility occurred during a brief moderate‐energy storm at the start of the survey. The effect of this mobility on beach morphology was inextricably linked to that of waves and currents. Meander bend migration, forced by wave‐ and longshore‐current‐induced migration of a bar during the storm, resulted in important but highly localized morphological change that was only a minor part of an irregular saw‐tooth pattern of change that affected the entire beach profile, and that was largely controlled by wave processes and longshore currents. The flow velocities in channels on this beach are too weak to generate the formation and longshore migration of high‐energy bedforms. Channel mobility and impact on beach morphology are expected to increase under storm conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Embryo dune development on a large,actively accreting macrotidal beach: Calais,North Sea coast of France

Sediment budget data from an 18‐month topographic survey were analysed with data from brief experiments on wind parameters, beach moisture contents, bedforms and sand mobilization in order to monitor conditions and patterns of embryo dune development over a flat 150–1000 m wide accreting upper beach. The surface conditions over the upper beach locally affect aeolian transport, but net dune development over time depends on sustained strong winds and their orientation. Incoming marine sand supplied by storms and onshore winds is reorganized by the dominant offshore to longshore winds into elongated embryo dunes over this upper beach, imprinting a regional morphology of long‐term longshore dune ridge development. Copyright © 2006 John Wiley & Sons, Ltd.     

Characteristics and dynamics of multiple intertidal bars,north Lincolnshire,England

Multiple intertidal bars and troughs, often referred to as ‘ridges and runnels’, are significant features on many macrotidal sandy beaches. Along the coastline of England and Wales, they are particularly prevalent in the vicinity of estuaries, where the nearshore gradient is gentle and a large surplus of sediment is generally present. This paper examines the dynamics of such bar systems along the north Lincolnshire coast. A digital elevation model of the intertidal morphology obtained using LIDAR demonstrates that three to five intertidal bars are consistently present with a spacing of approximately 100 m. The largest and most pronounced bars (height = 0·5–0·8 m) are found around mean sea level, whereas the least developed bars (height = 0·2–0·5 m) occur in the lower intertidal zone. Annual aerial photographs of the intertidal bar morphology were inspected to try to track individual bars from year to year to derive bar migration rates; however, there is little resemblance between concurrent photographs, and ‘resetting’ of the intertidal profile occurs on an annual basis. Three‐dimensional beach surveys were conducted monthly at three locations along the north Lincolnshire coast over a one‐year period. The intertidal bar morphology responds strongly to the seasonal variation in the forcing conditions, and bars are least numerous and flattest during the more energetic winter months. Morphological changes over the monthly time scale are strongly affected by longshore sediment transport processes and the intertidal bar morphology can migrate along the beach at rates of up to 30 m per month. The behaviour of intertidal bars is complex and varies over a range of spatial and temporal scales in response to a combination of forcing factors (e.g. incident wave energy, different types of wave processes, longshore and cross‐shore sediment transport), relaxation time and morphodynamic feedback. Copyright © 2005 John Wiley & Sons, Ltd.     

Links between wave forcing,offshore islands and a macro‐tidal headland‐bound bay beach

Profiles were analysed in conjunction with wave climate to assess offshore island influences on an embayed beach at Tenby, Wales. Time series analyses showed medium and short‐term beach oscillation, with volume exchanges between zones lagging by up to six months. Dominant southerly and southwesterly waves caused sub and low tidal longshore drift from south towards north, while less frequent southeasterly waves generated counter drift. Modelled inshore breaking waves had less energy than offshore ones and the former behaved differently between the low and high tidal zones (spring tidal range of 7 · 5 m). Variations in wave direction from directly behind the islands resulted in reduced wave heights and statistical analyses agreed with wave model results. These were correlated to morphological change and it was concluded that offshore islands change wave dynamics and modify the morphology of embayed beaches in their lee. Consequently, this work provides significant new insights into offshore island influences, shoreline behaviour and especially tidal setting Copyright © 2013 John Wiley & Sons, Ltd.     

Backshore coarsening processes triggered by wave‐induced sand transport: the critical role of storm events

Spatial backshore processes were investigated through field observations of topography and median sand grain size at a sandy beach facing the Pacific Ocean in Japan. A comparison of the backshore profile and cross‐shore distribution of the median sand grain size in 1999 and 2004 revealed an unusual sedimentary process in which sand was coarsened in a depositional area in the 5‐year period, although sediment is generally coarsened in erosional areas. In support of these observations, monthly spatial field analyses carried out in 2004 demonstrated a remarkable backshore coarsening process triggered by sedimentation in the seaward part of the backshore during a storm event. In order to elucidate mechanisms involved in the backshore coarsening process, thresholds of movable sand grain size under wave and wind actions (a uniform parameter for both these cases) in the onshore and offshore directions were estimated using wave, tide, and wind data. The cross‐shore distributions of the estimated thresholds provided reasonable values and demonstrated a coarsening mechanism involving the intermediate zone around the shoreline under alternating wave and wind actions as a result of which coarse sand was transported toward the seaward part of the backshore by large waves during storms and then toward the landward part by strong onshore winds. The 5‐year backshore coarsening is most certainly explained by repetition of short‐term coarsening mechanisms caused by wave‐induced sand transport occurring from the nearshore to the intermediate zone. Copyright © 2010 John Wiley & Sons, Ltd     

Beach Morphodynamics influenced by an ebb‐tidal delta on the north Florida Atlantic coast

Tidal inlets interrupt longshore sediment transport, thereby exerting an influence on adjacent beach morphology. To investigate the details and spatial extent of an inlet's influence, we examine beach topographic change along a 1.5 km coastal reach adjacent to Matanzas Inlet, on the Florida Atlantic coast. Analyses of beach morphology reveal a behavioral change between 0.64 and 0.86 km from the inlet channel centerline, interpreted to represent the spatial extent of inlet influence. Beyond this boundary, the beach is narrow, exhibits a statistically significant inverse correlation of shoreline position with offshore wave conditions, and has a uniform alongshore pattern in temporal behavior, as determined from empirical orthogonal function (EOF) analysis. On the inlet side of the boundary, the beach experiences monotonic widening (with proximity to the inlet), lacks spatial consistency in correlation between shoreline position and wave conditions, and exhibits an irregular pattern in spatial EOF modes. We augment the field observations with numerical modeling that provides calculations of wave setup and nearshore current patterns near the inlet, highlighting the effects of the ebb‐tidal delta on the assailing waves. The modeling results are verified by a natural experiment that occurred during May 2009, when a storm‐produced sedimentary mass accreted to the lower beach, then subsequently split into two oppositely directed waves of sediment that migrated away from the initial accretion site in the subsequent months. Our results suggest that the ebb‐tidal delta produces a pattern of wave setup that creates a pressure gradient driving an alongshore flow that opposes the longshore currents derived from breaking of obliquely oriented incident waves. The resulting recirculation pattern on the margin of the ebb‐tidal delta provides a mechanism through which the inlet influences adjacent barrier island beach morphology. Copyright © 2016 John Wiley & Sons, Ltd.     

Lithological controls on soft cliff planshape evolution under high and low sediment availability

This paper addresses a series of geomorphic questions relating to large‐scale (> 1 km), long‐term (100 – 1,000 years) coastal planshape evolution. Previous research on soft‐cliff coasts has recognised the role of protective fronting beach volumes on reducing rates of cliff toe retreat. However, it is the maintenance of this critical threshold that ultimately determines two contrasting modes of shoreline behaviour: Mode A, in which there is little beach sediment and shoreline evolution is controlled by material strength; and, Mode B, when ample beach sediment means that shoreline evolution is controlled by longshore sediment transport. Here we use a numerical model (SCAPE) to investigate temporal and spatial changes in beach volume on a broader range of feedbacks than considered in previous models. The transition between Mode A and Mode B coasts is defined by relative sediment inputs to outputs and used to explore how these contrasting modes control the evolution of an initial linear frontage exhibiting longshore changes in cliff lithology (material resistance and the proportion of beach grade material in the eroded bedrock). Under Mode A, relative changes in material resistance result in long term heterogeneous rates of retreat, which result in the development of persistent headland and embayment features. However, under Mode B, feedbacks between coastal planshape, longshore sediment transport, beach volume and wave energy result in steady state retreat rates regardless of longshore variations in resistance. Results are compared and contrasted to previous simulations and site specific examples and a conceptual model of Mode A and Mode B interactions presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Beach erosion and recovery during consecutive storms at a steep‐sloping,meso‐tidal beach

This study analyses beach morphological change during six consecutive storms acting on the meso‐tidal Faro Beach (south Portugal) between 15 December 2009 and 7 January 2010. Morphological change of the sub‐aerial beach profile was monitored through frequent topographic surveys across 11 transects. Measurements of the surf/swash zone dimensions, nearshore bar dynamics, and wave run‐up were extracted from time averaged and timestack coastal images, and wave and tidal data were obtained from offshore stations. All the information combined suggests that during consecutive storm events, the antecedent morphological state can initially be the dominant controlling factor of beach response; while the hydrodynamic forcing, and especially the tide and surge levels, become more important during the later stages of a storm period. The dataset also reveals the dynamic nature of steep‐sloping beaches, since sub‐aerial beach volume reductions up to 30 m³/m were followed by intertidal area recovery (–2 < z < 3 m) with rates reaching ~10 m³/m. However, the observed cumulative dune erosion and profile pivoting imply that storms, even of regular intensity, can have a dramatic impact when they occur in groups. Nearshore bars seemed to respond to temporal scales more related to storm sequences than to individual events. The formation of a prominent crescentic offshore bar at ~200 m from the shoreline appeared to reverse the previous offshore migration trend of the inner bar, which was gradually shifted close to the seaward swash zone boundary. The partially understood nearshore bar processes appeared to be critical for storm wave attenuation in the surf zone; and were considered mainly responsible for the poor interpretation of the observed beach behaviour on the grounds of standard, non‐dimensional, morphological parameters. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamics of multiple intertidal bars over semi‐diurnal and lunar tidal cycles,North Lincolnshire,England

Multiple intertidal bars are common features of wave‐dominated sandy beaches, yet their short‐term (<1 month) and small‐scale (<1 km) morphology and dynamics remain poorly understood. This study describes the morphodynamics of multiple intertidal bars in North Lincolnshire, England, during single and lunar tidal cycles under two contrasting conditions – first when significant wave height was <0·5 m and second when significant wave height frequently exceeded 1 m. The relative importance of swash, surf and shoaling processes in determining morphological change was examined using detailed field observations and a numerical model. The beach featured four intertidal bars and both cross‐shore and longshore bar morphology evolved during the field investigation, particularly under medium to high wave‐energy conditions. Numerical modelling suggests shoaling processes are most common on the seaward two bars under calm wave conditions (H_s < 0·5 m) and that surf zone processes become more common during neap tides and under more energetic (H_s < 0·5 m) conditions. Surf processes dominate the inner two bars, though swash influence increases in a landward direction. The numerical modelling results combined with low tide survey data and high‐resolution morphological measurements strongly suggest changes in the intertidal bar morphology are accomplished by surf zone processes rather than by shoaling wave or swash processes. This is because shoaling waves do not induce significant sediment transport to have any morphological effect, whereas swash action generally does not have enough scope to act as the swash zone is much narrower than the surf zone. It was found, however, that the absolute rate of morphological change under swash action and surfzone processes are of similar magnitudes and that swash action may induce a significant amount of local morphological change when the high tide mark is located on the upper bar, making this process important for bar morphodynamics. Copyright © 2007 John Wiley & Sons, Ltd.     

Assessing aeolian beach‐surface dynamics using a remote sensing approach

A remote sensing technique for assessing beach surface moisture was used to provide insight into beach‐surface evolution during an aeolian event. An experiment was carried out on 21 October 2007 at Greenwich Dunes, Prince Edward Island National Park, Canada, during which cameras were mounted on a mast on the foredune crest at a height of about 14 m above the beach. Maps of beach surface moisture were created based on a calibrated relationship between surface brightness from the photographs and surface moisture content measured in situ at points spaced every 2.5 m along a transect using a Delta‐T moisture probe. A time sequence of maps of surface moisture content captured beach surface evolution through the transport event at a spatial and temporal resolution that would be difficult to achieve with other sampling techniques such as impedance probes. Erosion of the foreshore and berm crest resulted in an increase in surface moisture content in these areas as the wetter underlying sediments were exposed. Flow expansion downwind of the berm crest led to sand deposition and a consequent decrease in surface moisture content. Remote sensing systems such as the one presented here allow observations of the combined evolution of beach surface moisture, shoreline position, and fetch distances during short‐term experiments and hence provide a comprehensive rendering of sediment erosion and transport processes. Copyright © 2012 John Wiley & Sons, Ltd.     

Field measurements of intertidal bar evolution on a high‐energy beach system

Nearshore bars play a pivotal role in coastal behaviour, helping to protect and restore beach systems particularly in post‐storm conditions. Examination of bar behaviour under various forcing conditions is important to help understand the short‐ to medium‐term evolution of sandy beach systems. This study carried out over a nine‐week period examines, the behaviour of three intertidal bars along a high energy sandy beach system in northwest Ireland using high‐frequency topographic surveys and detailed nearshore hydrodynamic modelling. Results show that, in general, there was onshore migration for all the bars during the study period, despite the variability observed between bars, which was driven mostly by wave dominated processes. Under the prevailing conditions migration rates of up to 1.83 m day^?1 and as low as 0.07 m day^?1 were observed. During higher wave energy events the migration rates of the bars decelerated in their onshore route, however, under lower wave energy conditions, they quickly accelerated maintaining their shoreward migration direction. Tidal influence appears to be subordinate in these conditions, being restricted to moderating the localized wave energy at low tides and in maintaining runnel configurations providing accommodation space for advancing slip faces. The study highlights the intricate behavioural patterns of intertidal bar behaviour along a high energy sandy coastline and provides new insights into the relative importance of wave and tidal forcing on bar behaviour over a relatively short time period. Copyright © 2016 John Wiley & Sons, Ltd.     

Late‐Holocene buried forests on the Oregon Coast

Deposits of late‐Holocene beach sand buried conifer forests episodically emerge on beaches of the Oregon coast. Simultaneously, sand dunes buried late‐Holocene forests growing on marine terraces landward of the beaches. Dune ramps, up to 60 m in elevation, connected the beach and dune deposits. The average age of wood samples from stumps rooted on the shore platforms is 3·07 ± 1·45 ka. The average age of wood and charcoal samples embedded in forest soil on the marine terraces is 3·27 ± 1·46 ka. Between 1994 and 2006, winter storm waves exposed more than 4·5 km² of late‐Holocene forest soil on shore platforms at 19 localities. Rooted stumps without soil were uncovered at an additional 14 localities. Once exposed, wave action eroded the soil rapidly (one to two years). The intact forest soil and roots on the shore platforms must have been nearly continuously buried, protected and preserved prior to recent exposure. The late‐Holocene buried forest provides the basis for a conceptual model of coastal evolution. A three stage reversal of erosion and sand supply must have occurred: (1) wave erosion switched to seaward advancement of forests, (2) forest growth and soil development switched to burial beneath beach and dune sand and (3) burial and preservation switched to wave erosion, truncation of dune ramps and landward retreat of sea cliffs. Copyright © 2006 John Wiley & Sons, Ltd.     

Consequences of short‐term changes in coastal processes: a case study

In 1997–98, unique critical beach erosion led to structural failure along the Penarth, South Wales, UK coastline and anthropogenic activities, such as the construction of the Cardiff Bay Barrage and offshore marine aggregate dredging, were suggested as causes. The time‐frame of significant erosion was between 1995 and 1997 and forcing agents (extreme sea level and wind direction) and shoreline indicators (mean beach level and MHW) were analysed in order to assess change. Water level analysis showed that although there was no significant difference between actual and predicted mean sea levels, extreme sea levels at that time were significantly higher (t = 3·305; d.f. = 8; p < 0·05). Three wind direction analyses (annual mean, mean annual maximum gust and mean annual maximum gust ≥28 kn) between 1995 and 1997 also showed significant differences (p < 0·05). All comprised more easterly components which meant they approached the beach from the sea. Furthermore, gusts ≥28 kn from the northeast quadrant, that is, 0° to 90° true, were significantly more frequent during these years (t = 3·674; d.f. = 8; p < 0·01). Justification of statistical significances was established and there was supporting evidence of unusual meteorological conditions at that time. Relationships showed correlation between forcing agents (extreme sea level and wind direction) and shoreline indicators (mean beach level and Mean High Water). Furthermore, regression analysis showed winds from the northeast quadrant resulted in steeper longshore gradients, as a consequence of beach material loss. Therefore, it was concluded that the critical erosion of Penarth beach between 1995 and 1997 was caused by increased wave attack from the northeast and southeast quadrants, generated by unique significant changes in wind direction and extreme sea levels. Copyright © 2008 John Wiley & Sons, Ltd.     

Decadal‐scale gravel beach evolution on a tectonically‐uplifting coast: Wellington,New Zealand

Uplift of the shoreline in tectonically‐active areas can have a profound influence on geomorphology changing the entire process dynamics of the coast as the landforms are removed from the influence of the sea. Over decadal timescales it is possible for the landforms to return to their pre‐earthquake condition and this paper examines the re‐establishment of mixed sand and gravel beaches on the coast of Wellington, New Zealand, subsequent to an uplift event in 1855. Over 60 topographic profiles were surveyed, seven sets of aerial photographs from a 67 year period were mapped and sediment size analyses conducted in order to quantify the nature of beach change following uplift, and associated relative sea level fall. These data were supported by surveys using ground penetrating radar. It is found that uplift raised the gravel beaches out of the swash zone thereby removing them from the littoral zone. Intertidal rocky reefs which occur between each embayment were also uplifted during the same event and completely interrupted the longshore transport system. Continued input of gravel material to the littoral zone allowed beaches to re‐establish sequentially along the coast as each embayment was infilled with sediment. This reconnection of the embayments with the longshore drift system is associated with the beach planform being initially drift dominated during infill but then switching to swash alignment once the embayment becomes infilled. This has resulted in shoreline accretion of over 100 m in some places, at rates of up to 4 m/yr, covering shore protection works built in the past few decades. The ability of the shore to adjust back to its pre‐uplift condition appears to be a function of the accommodation space created during uplift and the rate of sediment supply. Copyright © 2012 John Wiley & Sons, Ltd.     

Millennium‐scale recurrent uplift inferred from beach deposits bordering the eastern Nankai Trough,Omaezaki area,central Japan

A flight of Holocene marine terraces on the southwestern coast of Cape Omaezaki of central Japan provides evidence of recurrent millennium‐scale uplift events. We reconstructed the uplift history of these terraces by using facies analysis of drill core and geoslicer samples, environmental analysis of trace fossils, and ¹⁴C age determinations. Coastal uplift can be identified by the displacement of beach deposits such as foreshore deposits, which represent the intertidal swash zone of a wave‐dominated sandy coast. Three levels of former beach deposits facing the Nankai Trough were identified near the coast in the Omaezaki area. The highest of these, dated at about 3020–2880 BC, records a maximum of 2.2–2.7 m of emergence. The middle beach surface, of minimum age 370–190 BC, shows 1.6–2.8 m of emergence. The lowest beach surface, which is older than 1300–1370 AD, records 0.4–1.6 m of emergence. Our analysis of vertical crustal deformation data during the Holocene in this region suggests that rapid and strong uplift was restricted to the southwestern coast of the Omaezaki area and was probably caused by high‐angle thrusting on subsidiary faults branching from the underlying plate boundary megathrust.     

Modelling aeolian sand transport and morphological development in two beach nourishment areas

The aeolian sand transport model SAFE and the air flow model HILL were applied to evaluate cross‐shore changes at two nourished beaches and adjacent dunes and to identify the response of aeolian sand transport and morphology to several nourishment design parameters and fill characteristics. The main input of the model consisted of data on the sediment, tide and meteorological conditions, and of half‐yearly measured characteristics of topography, vegetation and sand fences. The cross‐shore profiles generated by SAFE–HILL were compared to measured cross‐shore profiles. The patterns of erosion and deposition, and the morphological development corresponded. In general, the rates of aeolian sand transport were overestimated. The impact of parameters that are related to beach nourishment (namely grain size, adaptation length and beach topography) on profile development was evaluated. Grain size affected the aeolian sand transport rate to the foredunes, and therefore the morphology. Adaptation length, which is a measure of the distance over which sediment transport adapts to a new equilibrium condition, affected the topography of the beach in particular. The topography of a beach nourishment had limited impact on both aeolian sand transport rate and morphology. Copyright © 2000 John Wiley & Sons, Ltd.     

Morphological records of storm floods exemplified by the impact of the 1872 Baltic storm on a sandy spit system in south‐eastern Denmark

Beach‐ridge systems are important geo‐archives providing evidence for past wave climate including catastrophic storm flood events. This study investigates the morphological impacts of the 1872 Baltic storm flood on a beach‐ridge system (sandy spit) in south‐eastern Denmark and evaluates the frequency of extreme storm flood events in the area over a longer time perspective. This paper combines field studies of morphology and sedimentary deposits, studies of historical maps, digital terrain model, ground‐penetrating radar profiles, and luminescence dating. Sea water reached 2.8 m above mean sea level (amsl) during peak inundation and, based on studies of the morphological impacts of the 1872 storm flood, the event can be divided into four phases. Phase 1: increasing mean water levels and wave activity at the beach brought sediments from the beach (intertidal bars and normal berm) higher up in the profile and led to the formation of a storm‐berm. Phase 2: water levels further increased and sediment in the upper part of the profile continued to build up the storm‐berm. Phase 3: water levels now reached the top of the dune ridge and were well above the storm‐berm level. Sea water was breaching the dune ridge at several sites and wash‐over fans were generated until a level where the mean water level had dropped too much. Phase 4: the non‐vegetated wash‐over fans functioned as pathways for aeolian sand transport and relatively high dunes were formed in particular along the margins of the fan where aeolian sand was trapped by existing vegetation. The studied beach‐ridge system records about 4500 years of accumulation; the storm flood sediments described are unique suggesting that the 1872 Baltic storm flood event was an extreme event. Thus studies of beach‐ridge systems form a new source for understanding storm surge risk. Copyright © 2013 John Wiley & Sons, Ltd.     

Monitoring of the sediment dynamics along a sandy shoreline by means of airborne hyperspectral remote sensing and LIDAR: a case study in Belgium

Airborne hyperspectral data and airborne laserscan or LIDAR data were applied to analyse the sediment transport and the beach morphodynamics along the Belgian shoreline. Between 2000 and 2004, four airborne acquisitions were performed with both types of sensor. The hyperspectral data were classified into seven sand type classes following a supervised classification approach, in which feature selection served to reduce the number of bands in the hyperspectral data. The seven classes allowed us to analyse the spatial dynamics of specific sediment volumes. The technique made it possible to distinguish the sand used for berm replenishment works or for beach nourishments from the sand naturally found on the backshore and the foreshore. Subtracting sequential DTMs (digital terrain models) resulted in height difference maps indicating the erosion and accretion zones. The combination of both data types, hyperspectral data and LIDAR data, provides a powerful tool, suited to analyse the dynamics of sandy shorelines. The technique was demonstrated on three sites along the Belgian shoreline: Koksijde, located on the West Coast and characterized by wide accretional beaches, influenced by dry berm replenishment works and the construction of groins; Zeebrugge, on the Middle Coast, where a beach nourishment was executed one year before the acquisitions started and where the dams of the harbour of Zeebrugge are responsible for the formation of a large accretional beach, and Knokke‐Heist, located on the East Coast and characterized by narrow, locally reflective, beaches, heavily influenced by nourishment activities. The methodology applied allowed retrieval of the main sediment transport directions as well as the amount of sediment transported. It proved to be specifically suited to follow up the redistribution and the re‐sorting of the fill in beach nourishment areas. Copyright © 2007 John Wiley & Sons, Ltd.