Methane-dominated thermochemical sulphate reduction in the Triassic Feixianguan Formation East Sichuan Basin, China: towards prediction of fatal H2S concentrations

New sour pools have recently found in the Lower Triassic Feixianguan Fm carbonate reservoirs in the East Sichuan Basin in China with H₂S up to 17.4% by volume. A recent blowout from a well drilled into this formation killed hundreds of people as a result of the percentage concentrations of H₂S. In order to assess the origin of fatal H₂S as well as the cause of petroleum alteration, H₂S concentrations and the isotopes, δ³⁴S and δ¹³C have been collected and measured in gas samples from reservoirs. Anhydrite, pyrite and elemental sulphur δ³⁴S values have been measured for comparison. The high concentrations of H₂S gas are found to occur at depths >3000 m (temperature now at 100 °C) in evaporated platform facies oolitic dolomite or limestone that contains anhydrite nodule occurrence within the reservoirs. Where H₂S concentrations are greater than 10% its δ³⁴S values lie between +12.0 and +13.2‰ CDT. This is within the range of anhydrite δ³⁴S values found within the Feixianguan Fm (+11.0 to +21.7‰; average 15.5±3.5‰ CDT). Thus H₂S must have been generated by thermochemical sulphate reduction (TSR) locally within the reservoirs. Burial history analysis and fluid inclusion data reveal that the temperature at which TSR occurred was greater than about 130–140 °C, suggesting that the present depth-temperature minimum is an artifact of post-TSR uplift. Both methane and ethane were actively involved in TSR since the petroleum became almost totally dry (no alkanes except methane) and methane δ¹³C values become significantly heavier as TSR proceeded. Methane δ¹³C difference thus reflects the extent of TSR. While it is tempting to use a present-day depth control (>3000 m) to predict the distribution of H₂S in the Feixianguan Fm, this is an invalid approach since TSR occurred when the formation was buried some 1000–2000 m deeper than it is at present. The likelihood of differential uplift across the basin means that it is important to develop a basinal understanding of the thermal history of the Feixianguan Fm so that it is possible to determine which parts of the basin have been hotter than 130–140 °C.     

四川盆地西南地区下三叠统嘉陵江组沉积相研究

通过对钻井岩心和测井等资料的研究,认为川西南地区下三叠统嘉陵江组存在着混积潮坪、开阔台地、局限台地和蒸发台地4种沉积相类型。嘉一期主要发育混积潮坪相和开阔台地相,嘉三期主要发育开阔台地相,嘉二、嘉四、嘉五期主要发育局限台地和蒸发台地相。选取并研究地层厚度、灰岩厚度、白云岩厚度和颗粒岩厚度等四种能反映沉积环境和沉积相的地质因素,指出了每个层段的沉积相平面分布特征。     

Influence of natural fractures on gas accumulation in the Upper Triassic tight gas sandstones in the northwestern Sichuan Basin,China

The Upper Triassic Xujiahe Formation in the northwestern Sichuan Basin, China, is a typical tight gas sandstone reservoir that contains natural fractures and has an average porosity of 1.10% and air permeability less than 0.1 md because of compaction and cementation. According to outcrops, cores and image logs, three types of natural fractures, namely, tectonic, diagenetic and overpressure-related fractures, have developed in the tight gas sandstones. The tectonic fractures include small faults, intraformational shear fractures and horizontal shear fractures, whereas the diagenetic fractures mainly include bed-parallel fractures. According to thin sections, the microfractures also include tectonic, diagenetic and overpressure-related microfractures. The diagenetic microfractures consist of transgranular, intragranular and grain-boundary fractures. Among these fractures, intraformational shear fractures, horizontal shear fractures and small faults are predominant and significant for fluid movement. Based on the Monte Carlo method, these intraformational shear fractures and horizontal shear fractures improve the reservoir porosity and permeability, thus serving as an important storage space and primary fluid-flow channels in the tight sandstones. The small faults may provide seepage channels in adjacent layers by cutting through layers. In addition, these intragranular and grain-boundary fractures increase the connectivity of the tight gas sandstones by linking tiny pores. The tectonic microfractures improve the seepage capability of the tight gas sandstones to some extent. Low-dip angle fractures are more abundant in the T₃X³ member than in the T₃X² and T₃X⁴ members. The fracture intensities of the sandstones in the T₃X³ member are greater than those in the T₃X² and T₃X⁴ members. The fracture intensities do not always decrease with increasing bed thickness for the tight sandstones. When the bed thickness of the tight sandstones is less than 1.0 m, the fracture intensities increase with increasing bed thickness in the T₃X³ member. Fluid inclusion evidence and burial history analysis indicate that the tectonic fractures developed over three periods. The first period was at the end of the Triassic to the Early Jurassic. The tectonic fractures developed during oil generation but before the matrix's porosity and permeability reduced, which suggests that these tectonic fractures could provide seepage channels for oil migration and accumulation. The second period was at the end of the Cretaceous after the matrix's porosity and permeability reduced but during peak gas generation, which indicates that gas mainly migrated and accumulated in the tectonic fractures. The third period was at the end of the Eogene to the Early Neogene. The tectonic fractures could provide seepage channels for secondary gas migration and accumulation from the Upper Triassic Xujiahe Formation into the overlying Jurassic Formation.     

An inland facies-controlled eogenetic karst of the carbonate reservoir in the Middle Permian Maokou Formation,southern Sichuan Basin,SW China

Carbonate karst is one of the research highlights in the field of carbonate reservoir geology. Here, we report on a new type of karst formed in the Middle Permian Maokou Formation, southern Sichuan Basin, SW China, i.e., inland facies-controlled eogenetic karst, which is different from the previously defined telogenetic karst. This karst is eogenetic as the formation was buried at shallow depths prior to being subaerially exposed for a period of 7–8 Myr, in the paleo-continental region of the Upper Yangtze Uplift. Subaerial exposure may have been caused by a sea level regression during the Tungwu Orogeny, which gave rise to a depositional hiatus over a broad area. The top of the Maokou Formation is commonly marked by a weathered crust and an unconformable relationship with overlying layers. Below the surface, the Maokou Formation contains sediments deposited by an underground drainage. The geological setting can be inferred from an inland karst far from coastline. The subsurface karst interval consists mainly of coarse-grained limestone and micrite, with the former occurring in shoal facies deposited in a high-energy depositional environment, and the latter in non-shoal facies deposited in a low-energy environment. Both of them were interbedded with in variable thicknesses. The coarse-grained limestone layers with high porosity and permeability acted as inception horizons, more favourable for the development of karst than the micritic layers with low porosity and permeability. Therefore, in places where both coarse-grained limestone and micrite are present, the karst is considered to be facies-controlled. The primary permeability of the coarse-grained limestone, combined with the permeability provided by faults and fractures, provides sufficient channels for karst water. Formation of the karst system was characterized by contemporaneous development at multiple levels, as controlled by the stratigraphic position of coarse-grained shoal facies. The karst reservoir therefore developed in both karst highland and karst transitional zone (area between the karst highland and karst basin). According to this model of karstification, hydrocarbon exploration should focus on karst highlands located on palaeohighs and in synclines located far from fault zones.     

Hydrothermal dolomite reservoir in the Precambrian Dengying Formation of central Sichuan Basin,Southwestern China

The Precambrian Dengying Formation is maximum buried carbonate reservoir in the Sichuan Basin. Reservoir types are thought to be dominated by sedimentary facies or karst controlled. Precursory sedimentary fabrics have been intensively superimposed by medium-to coarse-grained dolomite in most areas. Dolomitized intervals contain planar and saddle dolomite, quartz, and few hydrothermal replacive minerals. Fluid inclusion analyses of dolomite suggests that rocks are formed at temperatures ranging from 132.6°C to 218.7°C in the presence of dense brines, while the dolomite phases are demonstrated by negative δ¹⁸O and δ¹³C VPDB values. Strontium isotopes enriched in ⁸⁷Sr, and the fluid source could support the conclusion. The dolomites of the Dengying Formation in central Sichuan Basin that formed around basement-rooted wrench faults, in turn mainly oriented towards the North-South and East-West strike-slip faults, are detectable. Lastly, the grabens take the form of negative flower structures-the result of an intra-cratonic rift that took place during the Sinian and early Cambrian period through tensional faulting.Our primary contention is that basement fault, which resulted in the magmatic or deep clastic fluids migration, was key for the formation of the obvious high-temperature coarse dolomite and saddle dolomite replacement. Subsequently, hot fluids that circulated within the matrix dolomite were aided by fractures or vugs and (1) leached into the dolomite, producing vugs and pores; (2) precipitated saddle dolomite, and (3) led to hydrofracturing, fractures enlargement, and further brecciation. The dolomite eventually formed porous hydrocarbon reservoirs through diagenesis. This model better illustrates how fluids that originated from deep basin migration along strike-slip transfer faults and fractures flowed out to structures in Precambrian basement-rooted faults, inheriting the rift in the Cambrian. The data involved offers a fresh perspective pertinent to deep hydrocarbon exploration of dolomite reservoirs in Southwestern China.     

Modeling free gas content of the Lower Paleozoic shales in the Weiyuan area of the Sichuan Basin,China

Two sets of Lower Paleozoic organic-rich shales develop well in the Weiyuan area of the Sichuan Basin: the Lower Cambrian Jiulaodong shale and the Lower Silurian Longmaxi shale. The Weiyuan area underwent a strong subsidence during the Triassic to Early Cretaceous and followed by an extensive uplifting and erosion after the Late Cretaceous. This has brought about great changes to the temperature and pressure conditions of the shales, which is vitally important for the accumulation and preservation of shale gas. Based on the burial and thermal history, averaged TOC and porosity data, geological and geochemical models for the two sets of shales were established. Within each of the shale units, gas generation was modeled and the evolution of the free gas content was calculated using the PVTSim software. Results show that the free gas content in the Lower Cambrian and Lower Silurian shales in the studied area reached the maxima of 1.98–2.93 m³/t and 3.29–4.91 m³/t, respectively (under a pressure coefficient of 1.0–2.0) at their maximum burial. Subsequently, the free gas content continuously decreased as the shale was uplifted. At present, the free gas content in the two sets of shales is 1.52–2.43 m³/t and 1.94–3.42 m³/t, respectively (under a current pressure coefficient of 1.0–2.0). The results are roughly coincident with the gas content data obtained from in situ measurements in the Weiyuan area. We proposed that the Lower Cambrian and Lower Silurian shales have a shale gas potential, even though they have experienced a strong uplifting.     

Quantitative analyses of porosity evolution in tight grainstones: A case study of the Triassic Feixianguan formation in the Jiannan gas field,Sichuan Basin,China

Tight grainstones, although widespread throughout the Lower Triassic Feixianguan Formation in the Sichuan Basin, have received little attention, in part, due to their lower porosity and greater heterogeneity relative to their dolostone counterparts. Based on data from cores and thin sections, as well as petrophysical properties, the Feixianguan grainstones, representing a major gas reservoir in the Jiannan gas field were systemically analysed to better understand porosity evolution in tight carbonates that have experienced original oil accumulation and subsequent thermal cracking during progressive burial. The grainstones were divided into two types according to whether pyrobitumen was present, and their porosity evolutions were quantitatively reconstructed. Taking 40% as the original porosity, the grainstones without pyrobitumen, which were ineffective palaeo-oil reservoirs, lost 21.94% and 3.13% of their porosities through marine and burial calcite cementation, respectively, and 13.34% by compaction, and have a current porosity of 1.59%, thus allowing them to serve as major present-day gas reservoirs. Comparatively, pyrobitumen-bearing grainstones, which were once palaeo-oil reservoirs, lost 23.96% and 2.36% of their porosities through marine and burial calcite cementation, respectively; 11.4% by compaction, and 1.44% by pyrobitumen and have a current porosity of 0.84%, thus making them ineffective gas reservoirs. This study provides a quantitative understanding of the close association between porosity evolution and reservoir effectiveness for the palaeo-oil charge and present-day gas accumulation with respect to diagenetic history, which is useful for the future exploration in tight gas limestone reservoirs.     

Origin and distribution of hydrogen sulfide in the Yuanba gas field,Sichuan Basin,Southwest China

The Yuanba gas field in the Permian Changxing Formation (P₂c), which exhibits wide variations in its hydrogen sulfide (H₂S) concentration (1.20–12.16%), is a typical sour gas field in the northern Sichuan Basin. The sulfur-rich reservoir's solid bitumen (atomic S/C ratios are 0.032–0.142), and late calcite cement δ¹³C values, which are smaller than the δ¹³C values of the host dolostone, indicate that the H₂S originated from thermal sulfate reduction (TSR) and oil was involved in TSR. The gas souring index (GSI) of P₂c's gases is generally lower than 0.1. The ethane δ¹³C values increase as the GSI increases, although no obvious increase was observed in the methane δ¹³C values. The calcite cements' δ¹³C values (−15.36 to +4.56‰) in dolostone are heavier than the typical reported values, which implies that only limited heavy hydrocarbon gases were involved in TSR. No anhydrites developed in P₂c's reservoirs, and dissolved sulfate anions (SO₄²⁻) were mainly enriched during dolomitization. Insufficient dissolved SO₄²⁻ most likely caused the lower H₂S concentrations in the Permian to Triassic reservoirs in the northeastern Sichuan Basin compared to the Permian Khuff Formation in Saudi Arabia and the Jurassic Smackover Formation in Mississippi. Except for the SO₄²⁻ in residual water in paleo-oil zones, SO₄²⁻ from bottom water may also be involved in TSR; therefore, oil reservoirs with bottom water have more SO₄²⁻ and can produce more H₂S than pure oil reservoirs. This phenomenon may be the main cause of the great difference in the H₂S concentrations between reservoirs, while gravitational differentiation during late uplift most likely creates differences in H₂S concentrations in a single reservoir. Carbon dioxide (CO₂), which has a relatively heavy δ¹³C value (−3.9 to −0.3‰), may be the combined result of TSR, the balance between CO₂ and inorganic fluid systems, and carbonate decomposition.     

Multiple controls on the paleoenvironment of the Early Cambrian marine black shales in the Sichuan Basin,SW China: Geochemical and organic carbon isotopic evidence

In order to understand the paleoenvironment of the Early Cambrian black shale deposition in the western part of the Yangtze Block, geochemical and organic carbon isotopic studies have been performed on two wells that have drilled through the Qiongzhusi Formation in the central and southeastern parts of Sichuan Basin. It shows that the lowest part of the Qiongzhusi Formation has high TOC abundance, while the middle and upper parts display relative low TOC content. Redox-sensitive element (Mo) and trace elemental redox indices (e.g., Ni/Co, V/Cr, U/Th and V/(V + Ni)) suggest that the high-TOC layers were deposited under anoxic conditions, whereas the low-TOC layers under relatively dysoxic/oxic conditions. The relationship of the enrichment factors of Mo and U further shows a transition from suboxic low-TOC layers to euxinic high-TOC layers. On the basis of the Mo-TOC relationship, the Qiongzhusi Formation black shales were deposited in a basin under moderately restricted conditions. Organic carbon isotopes display temporal variations in the Qiongzhusi Formation, with a positive excursion of δ¹³C_org values in the lower part and a continuous positive shift in the middle and upper parts. All these geochemical and isotopic criteria indicate a paleoenvironmental change from bottom anoxic to middle and upper dysoxic/oxic conditions for the Qiongzhusi Formation black shales. The correlation of organic carbon isotopic data for the Lower Cambrian black shales in different regions of the Yangtze Block shows consistent positive excursion of δ¹³C_org values in the lower part for each section. This excursion can be ascribed to the widespread Early Cambrian transgression in the Yangtze Block, under which black shales were deposited.     

东海陆架盆地N气田花港组储层特征及分类评价

东海陆架盆地西湖凹陷古近系花港组储层为典型的低孔、低渗储层。基于大量岩心物性、粒度、薄片、压汞等资料,对N气田目的层储层岩性、物性和孔隙结构特征进行精细评价。结果表明：N气田花港组储层岩性以细砂岩为主,矿物成分构成稳定,以石英为主,黏土含量低,岩性较纯;随着埋藏变深,孔隙变差,粒间孔减少,溶蚀孔增加,孔喉半径减小,连通性变差;局部发育砂砾岩,且渗透率大于细砂岩一个数量级以上,可作为甜点储层开发。基于实验和试油资料统计结果,建立了一套适用于花港组储层的综合分类评价标准,包含孔隙度、渗透率、饱和度和地质特征4类储层重要参数,分类结果特征鲜明,分类依据科学可靠,为该区域低孔、低渗储层勘探开发提供依据。     

Marine hydrocarbon source rocks of the Upper Permian Longtan Formation and their contribution to gas accumulation in the northeastern Sichuan Basin,southwest China

Identification of the main hydrocarbon source rocks of the large Puguang gas field (northeastern Sichuan Basin, southwest China) has been the subject of much discussion in recent years. A key aspect has been the lack of a comprehensive understanding of the development of hydrocarbon source rocks of the Upper Permian Longtan Formation, which had been thought to contain mainly coal seams and thick carbonate layers. In this paper, based on geological data from more than ten wells and outcrops and their related mineralogy and geochemistry, we investigated the depositional environment and main factors controlling organic matter enrichment in the Longtan Formation. We propose a model which combines information on the geological environment and biological changes over time. In the model, organic matter from prolific phytoplankton blooms was deposited in quiescent platform interior sags with rising sea-levels. During the Longtan period, the area from Bazhong to Dazhou was a platform interior sag with relatively deep water and a closed environment, which was controlled by multiple factors including syngenetic fault settling, isolation of submarine uplifts and rising sea-levels leading to water column stratification. Although the bottom water was anoxic, the phytoplankton were able to bloom in the well-lit upper euphotic zone thus giving rise to a set of sapropelic black shales and marlstones containing mostly algal organic matter with minor terrestrial contributions. As a consequence, these rocks have a high hydrocarbon generation potentials and can be classified as high-quality source rocks. The area from Bazhong to Dazhou is a center of hydrocarbon generation, being the main source of reservoired paleo-oils and presently discovered as pyrobitumen in the Puguang gas field. The identification of these source rocks is very important to guide future petroleum exploration in the northeastern Sichuan Basin.     

Architecture of lacustrine mass-transport complexes in the Mesozoic Songliao Basin,China

3-D seismic data and wireline log profiles of the Central Depression in the Songliao Basin exhibit four lacustrine mass-transport complexes (MTCs) in the second and the third members of the Upper Cretaceous Nenjiang Formation. The mass-transport complex named MTC-A lies in the north of the Daqing Anticline with an area of approximately 95 km² and a maximum thickness of 62 m. It consists of five laterally and vertically stacked blocks striking E-W and has a convex-downslope front. The mass-transport complex named MTC-C is located in the south of the Daqing Anticline consisting of seven blocks. This MTC strikes NNE-SSW and has an area of approximately 61.5 km² and a maximum thickness of 55 m. MTC-B, the mass-transport complex lying in the middle of the Daqing Anticline, consists of three vertically stacked blocks and has a semi-circular outline striking E-W. MTC-B has an area of approximately 24 km² and a maximum thickness of 92 m. Along the Daqing Anticline from north to south, the three MTCs distribute in lacustrine facies in the NNE direction. The mass-transport complex named MTC-D located in the southeast of the Daqing Anticline has an area of approximately 150 km² with a maximum thickness of 135 m striking E-W, which is rich in mudstones. MTC-D is characterized by the three-layer architecture vertically consisting of a dragged layer at the bottom, a slumped layer in the middle, and a stable layer at the top. Besides, in the plane view, MTC-D can be divided into three parts according to the sliding distance and stacking pattern of the slip blocks: the detaching area, the stacking area and the drifting area. The MTCs are characterized by thickening upslope and thin-out downslope. Siltstones and very fine sandstones occur in 2–4 beds that are cumulatively 0.8–7 m thick in the upslope and central parts of the MTCs. The edges of the blocks are composed of mudstone. Seismic amplitude slices reveal arcuate or straight ridges on the block surfaces with a spacing density of 4–10 per kilometer and a height ranging from 25 to 40 m. The arcuate ridge paleo-morphology on the MTC surfaces suggests that blocks are slump bodies. The estimated minimum water depth at the time of the MTC emplacement is 30–70 m, and the sliding distance is 2–10 km. From 3-D seismic amplitude slices, no feeding channel connected to the mass-transport complexes is found. Besides, coupled with the continuous ridges on blocks and the clear and flat lateral edges suggest that mass-transport complexes belong to the prodelta slump bodies. Thus, the triggering mechanism of the MTCs may be closely related to earthquakes caused by volcanic activities with the evidence of three cinerite layers shown in the well cores.     

Pore characterization and methane sorption capacity of over-mature organic-rich Wufeng and Longmaxi shales in the southeast Sichuan Basin,China

Currently, the Upper Ordovician Wufeng (O₃w) and Lower Silurian Longmaxi (S₁l) Formations in southeast Sichuan Basin have been regarded as one of the most important target plays of shale gas in China. In this work, using a combination of low-pressure gas adsorption (N₂ and CO₂), mercury injection porosimetry (MIP) and high-pressure CH₄ adsorption, we investigate the pore characteristics and methane sorption capacity of the over-mature shales, and discuss the main controlling factors for methane sorption capacity and distribution of methane gas in pore spaces.Low pressure CO₂ gas adsorption shows that micropore volumes are characterized by three volumetric maxima (at about 0.35, 0.5 and 0.85 nm). The reversed S-shaped N₂ adsorption isotherms are type Ⅱ with hysteresis being noticeable in all the samples. The shapes of hysteresis loop are similar to the H3 type, indicating the pores are slit- or plate-like. Mesopore size distributions are unimodal and pores with diameters of 2–16 nm account for the majority of mesopore volume, which is generally consistent with MIP results. The methane sorption capacities of O₃w-S₁l shales are in a range of 1.63–3.66 m³/t at 30 °C and 10 MPa. Methane sorption capacity increase with the TOC content, surface area and micropore volume, suggesting organic matter might provide abundant adsorption site and enhance the strong methane sorption capacity. Samples with higher quartz content and lower clay content have larger sorption capacity. Our data confirmed that the effects of temperature and pressure on methane sorption capacity of shale formation are opposite to some extent, suggesting that, during the burial or uplift stage, the gas sorption capacity of hydrocarbon reservoirs can be expressed as a function of burial depth. Based on the adsorption energy theory, when the pore diameter is larger than 2 nm, much methane molecular will be adsorbed in pores space with distance to pore wall less than 2 nm; while free gas is mainly stored in the pore space with distance to pore wall larger than 2 nm. Distributions of adsorption space decrease with the increasing pore size, while free gas volume increase gradually, assuming the pore are cylindrical or sphere. Particularly, when the pore size is larger than 30 nm, the content of adsorbed gas space volume is very low and its contribution to the all gas content is negligible.     

Timing and mechanism of reservoir forming in the Upper Triassic Halahatang Formation,Yuqi block,Tarim Basin,northwestern China

The Yuqi block is an important area for oil and gas exploration in the northern Akekule uplift, Tarim Basin, northwestern China. The Upper Triassic Halahatang Formation (T₃h) within the Yuqi block can be subdivided into a lowstand system tract (LST), a transgressive system tract (TST), and a highstand system tract (HST), based on a study of initial and maximum flood surfaces. Oil in the lowstand system tract of the Halahatang Formation is characterized by medium to lightweight (0.8075 g/cm³–0.9258 g/cm³), low sulfur content (0.41%–1.4%), and high paraffin content (9.65%–10.25%). The distribution of oil and gas is principally controlled by low-amplitude anticlines and faults. Based on studies of fluorescence thin sections and homogenization temperatures of fluid inclusions, reservoirs in the T₃h were formed in at least two stages of hydrocarbon charge and accumulation. During the first stage (Jurassic–Cretaceous) both the structural traps and hydrocarbon reservoirs were initiated; during the second stage (Cenozoic) the structural traps were finally formed and the reservoirs were structurally modified. The reservoir-forming mechanism involved external hydrocarbon sources (i.e. younger reservoirs with oil and gas sourced from old rocks), two directions (vertical and lateral) of expulsion, and multi-stage accumulation. This model provides a theoretical fundament for future oil and gas exploration in the Tarim Basin and other similar basins in northwestern China.     

Lower Cretaceous micropalaeontology of the Fastnet Basin, offshore south-west Ireland

The Lower Cretaceous sediments of the Fastnet Basin display similarities to the succession in Britain. The continental Wealden facies is succeeded by a series of marine and marginal marine sediments which reflect the transgression which culminated in the Cenomanian as the chalk seas of the Upper Cretaceous. Some of the changes seen within the microfaunas and microfloras through the Lower Cretaceous are a reflection of the transient facies, and are diachronous across the basin. The microfaunal and palynological associations are described, and the approximate age of each association is based on species ranges reported from onshore Europe and Britain.In some areas, there were local differences in the micropalaeontological associations, in particular in the early Aptian to the late Barremian of well 63/10-1.     

Reservoir origin and characterization of gas pools in intrusive rocks of the Yingcheng Formation,Songliao Basin,NE China

In 2013, the first discovery of gas pools in well LS 208 in intrusive rocks of the Songliao Basin (SB), NE China was made in the 2nd member of the Yingcheng Formation in the Yingtai rift depression, proving that intrusive rocks of the SB have the potential for gas exploration. However, the mechanisms behind the origin of reservoirs in intrusive rocks need to be identified for effective gas exploration. The gas pool in intrusive rocks can be characterized as a low-abundance, high-temperature, normal-pressure, methane-rich, and lithologic pool based on integrated coring, logging, seismic, and oil test methods. The intrusive rocks show primary and secondary porosities, such as shrinkage fractures (SF), spongy pores (SP), secondary sieve pores (SSP), and tectonic fractures (TF). The reservoir is of the fracture–pore type with low porosity and permeability. A capillary pressure curve for mercury intrusion indicates small pore-throat size, negative skewness, medium–high displacement pressure, and middle–low mercury saturation. The development of fractures was found to be related to the quenching effects of emplacement and tectonic inversion during the middle–late Campanian. SP and SSP formed during two phases. The first phase occurred during emplacement of the intrusive rock in the late Albian, when the intrusions underwent alteration by organic acids. The second phase occurred between the early Cenomanian and middle Campanian, when the intrusions underwent alteration by carbonic acid. The SF formed prior to oil charging, the SSP + SP formed during oil charging, and the TF formed during the middle–late Campanian and promoted the distribution of gas pools throughout the reservoir. The intrusive rocks in the SB and the adjacent basins were emplaced in the mudstone and coal units, and have great potential for gas exploration.     

Organic geochemistry and source potential of the lacustrine shales of the Upper Triassic - Lower Jurassic Kap Stewart Formation, East Greenland

The Upper Triassic — Lower Jurassic Kap Stewart Formation (Jameson Land, East Greenland) has been studied by a combination of sedimentological and organic geochemical methods (LECO/Rock Eval, sulphur, gas chromatography) in order to assess the hydrocarbon source potential of the abundant and extensive lacustrine shale intervals present in the formation.The organic matter in the shales is a mixture of algal and higher plant remains (type I and III kerogen). An organic assemblage dominated by algal material, having a rich oil potential, occurs in an interval approximately 10–15 m thick in the uppermost part of the formation. This interval has an organic carbon content up to 10% and Hydrogen Index values up to 700. The interval is consistently traceable along the exposed margins and the central part of the basin. The deposition of the uppermost shale interval coincided with the largest expansion of the lake, during a period with a stratified water column and anoxic bottom-water conditions.Locally the rocks exposed are thermally postmature due to the thermal influence of dolerite sills which intruded the Kap Stewart Formation in Tertiary time. However, the organic-rich shale interval is beyond the influence of the sills and indicates a maturity prior to or in the early stages of oil generation.Calculations of the generative potential of the lacustrine source rocks suggest that significant amounts of petroleum may have been generated in those sediments which have undergone sufficient burial in the southern and central part of the basin. Here, the contemporaneously deposited delta front and barrier island sandstones can thus be considered as potential targets for future hydrocarbon exploration. This type of play may also be of importance in other North Atlantic basins with a similar basin history.     

Formation of low permeability reservoirs and gas accumulation process in the Daniudi Gas Field,Northeast Ordos Basin,China

The Daniudi Gas Field is a typical large-scale coal-generated wet gas field located in the northeastern Ordos Basin that contains multiple Upper Paleozoic gas-bearing layers and considerable reserves of gas. Based on integrated analysis of reservoir petrology, carbonate cement C–O isotope, geochemistry of source rocks and HC gas and numerical basin modeling, a comprehensive study focusing on the formation of low permeability reservoirs and gas generation process uncovers a different gas accumulation scene in Daniudi Gas Field. The gas accumulation discovered was controlled by the reservoir permeability reduction and gas generation process, and can be divided into two distinct stages by the low permeability reservoir formation time: before the low permeability reservoir formation, the less matured gas was driven by buoyancy, migrated laterally towards NE and then accumulated in NE favorable traps during Late Triassic to early Early Cretaceous; after the low permeability reservoir formation, highly matured gas was driven by excessive pressure, migrated vertically and accumulated in-situ or near the gas-generating centers during early to late Early Cretaceous. The coupling relationship between reservoir diagenetic evolution and gas generation process controlled on gas accumulation of the Daniudi Gas Field. This study will aid in understanding the gas accumulation process and planning further E&D of the Upper Paleozoic super-imposed gas layers in the whole Ordos Basin and other similar super-imposed low permeability gas layer basins.     

Rare earth element characteristics of the carboniferous Huanglong Formation dolomites in eastern Sichuan Basin,southwest China: Implications for origins of dolomitizing and diagenetic fluids

Marine dolostones of Carboniferous Huanglong Formation constitute major gas reservoir rocks in eastern Sichuan Basin. However, the investigation with respect to sources of dolomitizing and diagenetic fluids is relatively underexplored. The current study attempts to investigate the REE characteristics of dolomites using seawater normalization standard, and therefore discusses the origins of dolomitizing and diagenetic fluids, on the basis of continuous 47.33-m-long core samples from the second member of Huanglong Formation (C₂h₂) in eastern Sichuan Basin. Low Th, Sc, and Hf concentrations (0.791 × 10⁻⁶, 4.751 × 10⁻⁶, and 0.214 × 10⁻⁶, respectively), random correlation between total REE concentration (ΣREE) and Fe or Mn abundance, and seawater-like Y/Ho ratios (mean value of 45.612) indicate that the carbonate samples are valid for REE analysis. Based on petrographic characteristics, four dolomite types are identified, including micritic-sized dolomite (type Dol-1), fine-to medium-sized dolomite (type Dol-2), medium-to coarse-sized dolomite (type Dol-3), and coarse-to giant-sized saddle dolomite (type Dol-4). Dol-1 dolomites, characterized by positive Ce anomaly (mean value of 6.398), light REE (LREE) enrichment, and heavy REE (HREE) depletion with mean LREE/HREE ratio of 12.657, show micritic calcite-like REE patterns, indicating seawater origin of their dolomitizing fluids. Dol-1 dolomites were formed in sabkha environment whereas the dolomitizing fluids originated from evaporative brine water due to their micritic crystal sizes and tight lithology. Dol-2 dolomites, particularly subtype Dol-2a barely developing vuggy porosity, also show micritic calcite-like REE patterns, suggesting their dolomitizing fluids were seawater or seawater-derived fluids. This inference is confirmed by low Fe and Mn concentrations, which range from 651 μg/g to 1018 μg/g (mean value of 863 μg/g) and 65 μg/g to 167 μg/g (mean value of 105 μg/g), respectively, whereas homogenization temperatures (T_h, mean value of 103 °C) indicate that Dol-2 dolomites were formed under burial environment. Dol-3 dolomites, in form of cements of Dol-2 dolomites, show similar REE patterns to their host minerals (i.e., Dol-2 dolomites), indicating their parent source was possibly derived from Dol-2 dolomites. Dol-3 dolomites have high Fe and Mn concentrations with mean values of 3346 μg/g (ranging from 2897 μg/g to 3856 μg/g) and 236 μg/g (ranging from 178 μg/g to 287 μg/g), respectively, indicating the involvement of meteoric water. Meanwhile, it confirms that the dissolution in Dol-2 dolomites was caused by meteoric water leaching. Positive Eu anomalies (mean value of 1.406) in Dol-4 dolomites, coupled with high homogenization temperatures (mean value of 314 °C), suggest that Dol-4 dolomites precipitated from hydrothermal fluids. High Fe and Mn concentrations (mean values of 2521 μg/g and 193 μg/g, respectively) in Dol-4 dolomites likely results from interactions of hydrothermal fluids with deep burial clastic rocks.     

四川盆地中南部地区中三叠统雷口坡组沉积相研究

川中南部地区中三叠统雷口坡组划分为3个相（开阔台地相、局限台地相、蒸发台地相）、4个亚相（潮下、泻湖、潮阃坪、潮上坪）和17个微相。沉积相横向上总体变化不大,岩性较统一,蒸发岩较发育,纵向上沉积相变化具有同步性。利用单因素法和优势相法,并结合层序地层学研究成果,把雷口坡组分为7个作图单元,较精确地展示了雷口坡纽不同层段的沉积相展布和演化。研究区内雷口坡期的相对海平面升降变化和台地次级洼隆相间的古地貌共同控制着沉积相带展布和演化。雷口坡组以局限台地相为主,主要发育在雷一段1亚段的台内滩微相,为储集体有利的发育相带,多发育于潮间高处与泻湖的过渡区附近相对高能带。