Hydrocarbon generation and expulsion characteristics of Eocene source rocks in the Huilu area,northern Pearl River Mouth basin,South China Sea: Implications for tight oil potential

In recent years, new oil reservoirs have been discovered in the Eocene tight sandstone of the Huilu area, northern part of the Pearl River Mouth basin, South China Sea, indicating good prospects for tight oil exploration in the area. Exploration has shown that the Huilu area contains two main sets of source rocks: the Eocene Wenchang (E₂w) and Enping (E₂e) formations. To satisfy the requirements for further exploration in the Huilu area, particularly for tight oil in Eocene sand reservoirs, it is necessary to re-examine and analyze the hydrocarbon generation and expulsion characteristics. Based on mass balance, this study investigated the hydrocarbon generation and expulsion characteristics as well as the tight oil resource potential using geological and geochemical data and a modified conceptual model for generation and expulsion. The results show that the threshold and peak expulsion of the E₂w source rocks are at 0.6% vitrinite reflectance and 0.9% vitrinite reflectance, respectively. There were five hydrocarbon expulsion centers, located in the western, eastern, and northern Huizhou Sag and the southern and northern Lufeng Sag. The hydrocarbon yields attributed to E₂w source rocks are 2.4 × 10¹¹ tons and 1.6 × 10¹¹ tons, respectively, with an expulsion efficiency of 65%. The E₂e source rock threshold and peak expulsion are at 0.65% vitrinite reflectance and 0.93% vitrinite reflectance, respectively, with hydrocarbon expulsion centers located in the centers of the Huizhou and Lufeng sags. The yields attributed to E₂e source rocks are 1.1 × 10¹¹ tons and 0.2 × 10¹¹ tons, respectively, with an expulsion efficiency of 20%. Using an accumulation coefficient of 7%–13%, the Eocene tight reservoirs could contain approximately 1.3 × 10¹⁰ tons to 2.3 × 10¹⁰ tons, with an average of 1.8 × 10¹⁰ tons, of in-place tight oil resources (highest recoverable coefficient can reach 17–18%), indicating that there is significant tight oil potential in the Eocene strata of the Huilu area.     

Organic geochemistry and reservoir characterization of the organic matter-rich calcilutite in the Shulu Sag,Bohai Bay Basin,North China

Although extensive studies have been conducted on unconventional mudstone (shales) reservoirs in recent years, little work has been performed on unconventional tight organic matter-rich, fine-grained carbonate reservoirs. The Shulu Sag is located in the southwestern corner of the Jizhong Depression in the Bohai Bay Basin and filled with 400–1000 m of Eocene lacustrine organic matter-rich carbonates. The study of the organic matter-rich calcilutite in the Shulu Sag will provide a good opportunity to improve our knowledge of unconventional tight oil in North China. The dominant minerals of calcilutite rocks in the Shulu Sag are carbonates (including calcite and dolomite), with an average of 61.5 wt.%. The carbonate particles are predominantly in the clay to silt size range. Three lithofacies were identified: laminated calcilutite, massive calcilutite, and calcisiltite–calcilutite. The calcilutite rocks (including all the three lithofacies) in the third unit of the Shahejie Formation in the Eocene (Es₃) have total organic carbon (TOC) values ranging from 0.12 to 7.97 wt.%, with an average of 1.66 wt.%. Most of the analyzed samples have good, very good or excellent hydrocarbon potential. The organic matter in the Shulu samples is predominantly of Type I to Type II kerogen, with minor amounts of Type III kerogen. The temperature of maximum yield of pyrolysate (T_max) values range from 424 to 452 °C (with an average of 444 °C) indicating most of samples are thermally mature with respect to oil generation. The calcilutite samples have the free hydrocarbons (S₁) values from 0.03 to 2.32 mg HC/g rock, with an average of 0.5 mg HC/g rock, the hydrocarbons cracked from kerogen (S₂) yield values in the range of 0.08–57.08 mg HC/g rock, with an average of 9.06 mg HC/g rock, and hydrogen index (HI) values in the range of 55–749 mg HC/g TOC, with an average of 464 mg HC/g TOC. The organic-rich calcilutite of the Shulu Sag has very good source rock generative potential and have obtained thermal maturity levels equivalent to the oil window. The pores in the Shulu calcilutite are of various types and sizes and were divided into three types: (1) pores within organic matter, (2) interparticle pores between detrital or authigenic particles, and (3) intraparticle pores within detrital grains or crystals. Fractures in the Shulu calcilutite are parallel to bedding, high angle, and vertical, having a significant effect on hydrocarbon migration and production. The organic matter and dolomite contents are the main factors that control calcilutite reservoir quality in the Shulu Sag.     

Tracing of deeply-buried source rock: A case study of the WC9-2 petroleum pool in the Pearl River Mouth Basin, South China Sea

The identification of a deeply-buried petroleum-source rock, owing to the difficulty in sample collection, has become a difficult task for establishing its relationship with discovered petroleum pools and evaluating its exploration potential in a petroleum-bearing basin. This paper proposes an approach to trace a deeply-buried source rock. The essential points include: determination of the petroleum-charging time of a reservoir, reconstruction of the petroleum generation history of its possible source rocks, establishment of the spatial connection between the source rocks and the reservoir over its geological history, identification of its effective source rock and the petroleum system from source to trap, and evaluation of petroleum potential from the deeply-buried source rock. A case study of the W9-2 petroleum pool in the Wenchang A sag of the Pearl River Mouth Basin, South China Sea was conducted using this approach. The W9-2 reservoir produces condensate oil and gas, sourced from deeply-buried source rocks. The reservoir consists of a few sets of sandstone in the Zhuhai Formation, and the possible source rocks include an early Oligocene Enping Formation mudstone and a late Eocene Wenchang Formation mudstone, with a current burial depth from 5000 to 9000 m. The fluid inclusion data from the reservoir rock indicate the oil and the gas charged the reservoir about 18–3.5 Ma and after 4.5 Ma, respectively. The kinetic modeling results show that the main stages of oil generation of the Wenchang mudstone and the Enping mudstone occurred during 28–20 Ma and 20–12 Ma, respectively, and that the δ¹³C₁ value of the gas generated from the Enping mudstone has a better match with that of the reservoir gas than the gas from the Wenchang mudstone. Results from a 2D basin modeling further indicate that the petroleum from the Enping mudstone migrated upward along the well-developed syn-sedimentary faults in the central area of the sag into the reservoir, but that the petroleum from the Wenchang mudstone migrated laterally first toward the marginal faults of the sag and then migrated upward along the faults into shallow strata. The present results suggest that the trap structure in the central area of the sag is a favorable place for the accumulation of the Enping mudstone-derived petroleum, and that the Wenchang mudstone-derived petroleum would have a contribution to the structures along the deep faults as well as in the uplifted area around the sag.     

Geological roles of the siltstones in tight oil play

Understanding the hydrocarbon accumulation pattern in unconventional tight reservoirs is crucial for hydrocarbon evaluation and oil/gas extraction from such reservoirs. Previous studies on tight oil accumulation are mostly concerned with self-generation or from source to reservoir rock over short distances. However, the Lucaogou tight oil in Jimusar Sag of Junggar Basin shows transitional feature in between. The Lucaogou Formation comprises fine-grain sedimentary rocks characterized by thin laminations and frequently alternating beds. The Lucaogou tight silt/fine sandstones are poorly sorted. Dissolved pores are the primary pore spaces, with average porosity of 9.20%. Although the TOC of most silt/fine sandstones after Soxhlet extraction is lower than that before extraction, they show that the Lucaogou siltstones in the area of study have fair to good hydrocarbon generation potential (average TOC of 1.19%, average S₂ of 4.33 mg/g), while fine sandstones are relatively weak in terms of hydrocarbon generation (average TOC of 0.4%, average S₂ of 0.78 mg/g). The hydrocarbon generation amount of siltstones, which was calculated according to basin modeling transformation ratio combined with original TOC based on source rock parameters, occupies 16%–72% of oil retention amount. Although siltstones cannot produce the entire oil reserve, they certainly provide part of them. Grain size is negatively correlated with organic matter content in the Lucaogou silt/fine sandstones. Fine grain sediments are characterized by lower deposition rate, stronger adsorption capacity and oxidation resistance, which are favorable for formation of high quality source rocks. Low energy depositional environment is the primary reason for the formation of siltstones containing organic matter. Positive correlation between organic matter content and clay content in Lucaogou siltstones supports this view point. Lucaogou siltstones appear to be effective reservoir rocks due to there relatively high porosity, and also act as source rocks due to the fair to good hydrocarbon generation capability.     

琼东南盆地深水区烃源岩生烃动力学及生气模式

In order to investigate the hydrocarbon generation process and gas potentials of source rocks in deepwater area of the Qiongdongnan Basin, kinetic parameters of gas generation(activation energy distribution and frequency factor) of the Yacheng Formation source rocks(coal and neritic mudstones) was determined by thermal simulation experiments in the closed system and the specific KINETICS Software. The results show that the activation energy(Ea) distribution of C1–C5 generation ranges from 50 to 74 kcal/mol with a frequency factor of 2.4×1015 s–1 for the neritic mudstone and the Ea distribution of C1–C5 generation ranges from 49 to 73 kcal/mol with a frequency factor of 8.92×1013 s–1 for the coal. On the basis of these kinetic parameters and combined with the data of sedimentary burial and paleothermal histories, the gas generation model of the Yacheng Formation source rocks closer to geological condition was worked out, indicating its main gas generation stage at Ro(vitrinite reflectance) of 1.25%–2.8%. Meanwhile, the gas generation process of the source rocks of different structural locations(central part, southern slope and south low uplift) in the Lingshui Sag was simulated. Among them, the gas generation of the Yacheng Formation source rocks in the central part and the southern slope of the sag entered the main gas window at 10 and 5 Ma respectively and the peak gas generation in the southern slope occurred at 3 Ma. The very late peak gas generation and the relatively large gas potential indices(GPI:20×108–60×108 m3/km2) would provide favorable conditions for the accumulation of large natural gas reserves in the deepwater area.     

Organic geochemistry of marine source rocks and pyrobitumen-containing reservoir rocks of the Sichuan Basin and neighbouring areas,SW China

Three bitumen fractions were obtained and systematically analysed for the terpane and sterane composition from 30 Paleozoic source rocks and 64 bitumen-containing reservoir rocks within the Upper Sinian, Lower Cambrian, Lower Silurian, Middle Carboniferous, Upper Permian and Lower Triassic strata in the Sichuan Basin and neighbouring areas, China. These bitumen fractions include extractable oils (bitumen I), oil-bearing fluid inclusions and/or closely associated components with the kerogen or pyrobitumen/mineral matrix, released during kerogen or pyrobitumen isolation and demineralization (bitumen II), and bound compounds within the kerogen or pyrobitumen released by confined pyrolysis (bitumen III). In addition, atomic H/C and O/C ratios and carbon isotopic compositions of kerogen and pyrobitumen from some of the samples were measured. Geochemical results and geological information suggest that: (1) in the Central Sichuan Basin, hydrocarbon gases in reservoirs within the fourth section of the Upper Sinian Dengying Formation were derived from both the Lower Cambrian and Upper Sinian source rocks; and (2) in the Eastern Sichuan Basin, hydrocarbon gases in Middle Carboniferous Huanglong Formation reservoirs were mainly derived from Lower Silurian source rocks, while those in Upper Permian and Lower Triassic reservoirs were mainly derived from both Upper Permian and Lower Silurian marine source rocks. For both the source and reservoir rocks, bitumen III fractions generally show relatively lower maturity near the peak oil generation stage, while the other two bitumen fractions show very high maturities based on terpane and sterane distributions. Tricyclic terpanes evolved from the distribution pattern C₂₀ < C₂₁ < C₂₃, through C₂₀ < C₂₁ > C₂₃, finally to C₂₀ > C₂₁ > C₂₃ during severe thermal stress. The concentration of C₃₀ diahopane in bitumen III (the bound components released from confined pyrolysis) is substantially lower than in the other two bitumen fractions for four terrigenous Upper Permian source rocks, demonstrating that this compound originated from free hopanoid precursors, rather than hopanoids bound to the kerogen.     

Source rock characteristics and hydrocarbon generation modelling of Upper Cretaceous Mukalla Formation in the Jiza-Qamar Basin,Eastern Yemen

The Upper Cretaceous Mukalla coals and other organic-rich sediments which are widely exposed in the Jiza-Qamar Basin and believed to be a major source rocks, were analysed using organic geochemistry and petrology. The total organic carbon (TOC) contents of the Mukalla source rocks range from 0.72 to 79.90% with an average TOC value of 21.50%. The coals and coaly shale sediments are relatively higher in organic richness, consistent with source rocks generative potential. The samples analysed have vitrinite reflectance in the range of 0.84–1.10 %Ro and pyrolysis T_max in the range of 432–454 °C indicate that the Mukalla source rocks contain mature to late mature organic matter. Good oil-generating potential is anticipated from the coals and coaly shale sediments with high hydrogen indices (250–449 mg HC/g TOC). This is supported by their significant amounts of oil-liptinite macerals are present in these coals and coaly shale sediments and Py-GC (S₂) pyrograms with n-alkane/alkene doublets extending beyond nC₃₀. The shales are dominated by Type III kerogen (HI < 200 mg HC/g TOC), and are thus considered to be gas-prone.One-dimensional basin modelling was performed to analysis the hydrocarbon generation and expulsion history of the Mukalla source rocks in the Jiza-Qamar Basin based on the reconstruction of the burial/thermal maturity histories in order to improve our understanding of the of hydrocarbon generation potential of the Mukalla source rocks. Calibration of the model with measured vitrinite reflectance (Ro) and borehole temperature data indicates that the present-day heat flow in the Jiza-Qamar Basin varies from 45.0 mW/m² to 70.0 mW/m² and the paleo-heat flow increased from 80 Ma to 25 Ma, reached a peak heat-flow values of approximately 70.0 mW/m² at 25 Ma and then decreased exponentially from 25 Ma to present-day. The peak paleo-heat flow is explained by the Gulf of Aden and Red Sea Tertiary rifting during Oligocene-Middle Miocene, which has a considerable influence on the thermal maturity of the Mukalla source rocks. The source rocks of the Mukalla Formation are presently in a stage of oil and condensate generation with maturity from 0.50% to 1.10% Ro. Oil generation (0.5% Ro) in the Mukalla source rocks began from about 61 Ma to 54 Ma and the peak hydrocarbon generation (1.0% Ro) occurred approximately from 25 Ma to 20 Ma. The modelled hydrocarbon expulsion evolution suggested that the timing of hydrocarbon expulsion from the Mukalla source rocks began from 15 Ma to present-day.     

Geochemistry,reservoir characterization and hydrocarbon generation potential of lacustrine shales: A case of YQ-1 well in the Yuqia Coalfield,northern Qaidam Basin,NW China

Ever since a breakthrough of marine shales in China, lacustrine shales have been attracting by the policy makers and scientists. Organic-rich shales of the Middle Jurassic strata are widely distributed in the Yuqia Coalfield of northern Qaidam Basin. In this paper, a total of 42 shale samples with a burial depth ranging from 475.5 m to 658.5 m were collected from the Shimengou Formation in the YQ-1 shale gas borehole of the study area, including 16 samples from the Lower Member and 26 samples from the Upper Member. Geochemistry, reservoir characteristics and hydrocarbon generation potential of the lacustrine shales in YQ-1 well were preliminarily investigated using the experiments of vitrinite reflectance measurement, maceral identification, mineralogical composition, carbon stable isotope, low-temperature nitrogen adsorption, methane isothermal adsorption and rock eval pyrolysis. The results show that the Shimengou shales have rich organic carbon (averaged 3.83%), which belong to a low thermal maturity stage with a mean vitrinite reflectance (R_o) of 0.49% and an average pyrolytic temperature of the generated maximum remaining hydrocarbon (T_max) of 432.8 °C. Relative to marine shales, the lacustrine shales show low brittleness index (averaged 34.9) but high clay contents (averaged 55.1%), high total porosities (averaged 13.71%) and great Langmuir volumes (averaged 4.73 cm⁻³ g). Unlike the marine and marine-transitional shales, the quartz contents and brittleness index (BI) values of the lacustrine shales first decrease then increase with the rising TOC contents. The kerogens from the Upper Member shales are dominant by the oil-prone types, whereas the kerogens from the Lower Member shales by the gas-prone types. The sedimentary environment of the shales influences the TOC contents, thus has a close connection with the hydrocarbon potential, mineralogical composition, kerogen types and pore structure. Additionally, in terms of the hydrocarbon generation potential, the Upper Member shales are regarded as very good and excellent rocks whereas the Lower Member shales mainly as poor and fair rocks. In overall, the shales in the top of the Upper Member can be explored for shale oil due to the higher free hydrocarbon amount (S₁), whereas the shales in the Lower Member and the Upper Member, with the depths greater than 1000 m, can be suggested to explore shale gas.     

Effect of sedimentary heterogeneities on hydrocarbon accumulations in the Permian Shanxi Formation,Ordos Basin,China: Insight from an integrated stratigraphic forward and petroleum system modelling

Sedimentary heterogeneities are ubiquitous in nature and occur over a range of scales from core, reservoir to basin scales. They may thus exert significant influences on hydrocarbon generation, migration and accumulation. The sedimentary heterogeneities of the Permian Shanxi Formation in the Ordos Basin, China were modelled using Sedsim, a stratigraphic forward modelling program. The simulation results were then used to construct a 3D petroleum system model using PetroMod. The effects of sedimentary heterogeneities on hydrocarbon accumulations were evaluated by comparing the integrated Sedsim-PetroMod model with the classic 3D basin model. The Sedsim simulation shows that considerable sedimentary heterogeneities are present within the Shanxi Formation, as a result of the interplay of the initial topography, tectonic subsidence, base level change and sediment inputs. A variety of lithologies were developed both laterally and vertically within the Shanxi Formation at kilometre and metre scales, respectively, with mudstones mainly developed in the depositional centre, while sandstones developed in the southern and northern margin areas. A typical source-ward retrogradation is well developed within the Lower Shanxi Formation.A base-case classic 3D basin model was constructed to quantify the Permian petroleum system in the Ordos Basin. The geological and thermal models were calibrated using Vr and borehole temperature data. The source rocks of the Upper Paleozoic became mature (R_o > 0.5%) and high mature (R_o > 1.2%) in the late Triassic and late Jurassic, respectively, in the central and southern areas. During the Early Cretaceous, a tectonically induced geothermal event occurred in the southern Ordos Basin. This caused the source rocks to reach over maturity (R_o > 2.0%) quite rapidly in the early Late Cretaceous in the central and southern areas. All the source rock transformation ratios (TR) at present are greater than 70% in the P₁ coal and P₁ mudstone layers with TR values approaching 100% in the central and southern areas. The transformation ratios of the P₁ limestone are close to 100% over the entire interval.In the base-case model, a large amount of hydrocarbons appear to have been expelled and migrated into the Shanxi Formation, but only a minor amount was accumulated to form reservoirs. In the model, the Shanxi Formation sandstone layer was set to be homogeneous vertically and there was no regional seal rocks present at the top of the Shanxi Formation. Therefore hydrocarbons could not be trapped effectively with only minor accumulations in some local structural highs where hydrocarbons are trapped both at the top and in the up-dip direction by the adjacent mudstone facies. In contrast, the integrated Sedsim-PetroMod model takes into account of the internal lithological and sedimentary facies heterogeneities within the Shanxi Formation, forming complex contiguous sandstone-mudstone stacking patterns. Hydrocarbons were found to have accumulated in multiple intervals of lithological traps within the Shanxi Formation. The results indicate that lithological distinctions, controlled by sedimentary heterogeneities in three dimensions can provide effective sealing in both the top and up-dip directions for hydrocarbon accumulations, with gas being mainly accumulated near the depocentre where lithological traps usually formed due to frequent oscillations of the lake level.     

Source rocks and petroleum systems in the Hungarian part of the Pannonian Basin: The potential for shale gas and shale oil plays

The objectives of our study were to assess the thickness, lateral extent, organic richness and maturity of the potential source rocks in Hungary and to estimate the volumes of hydrocarbons generated, in order that potential shale gas and shale oil plays could be identified and characterised.The Upper Triassic Kössen Marl in south-west Hungary could represent the best potential shale gas/shale oil play, due to its high organic richness, high maturity and the presence of fracture barriers. The area of gas- and oil-generative maturity is around 720 km² with the unexpelled petroleum estimated to be up to 9 billion barrel oil-equivalent.The Lower Jurassic sediments of the Mecsek Mountains and under the Great Plain contain fair quality gas-prone source rocks, with low shale gas potential, except for a thin Toarcian shale unit which is richer in organic matter. The latter could form a potential shale gas play under the Great Hungarian Plain, if it is thicker locally.The Lower Oligocene Tard Clay in north-east Hungary could represent the second best potential shale oil play, due to its organic richness, favourable maturity and large areal extent (4500 km²) with around 7 billion barrel oil-equivalent estimated in-place volume of petroleum.Middle Miocene marine formations could represent locally-developed shale gas plays; they have fair amounts of organic matter and a mixture of type II/III kerogen, but their vertical and lateral variability is high.The Upper Miocene lacustrine Endrőd Marl contains less organic matter and the kerogen is mainly type III, which is not favourable for shale gas generation. The high carbonate and clay content, plus the lack of upper and lower fracture barriers would represent additional production challenges.     

The mechanism and verification analysis of permafrost-associated gas hydrate formation in the Qilian Mountain,Northwest China

Muri Basin in the Qilian Mountain is the only permafrost area in China where gas hydrate samples have been obtained through scientific drilling. Fracture-filling hydrate is the main type of gas hydrate found in the Qilian Mountain permafrost. Most of gas hydrate samples had been found in a thin-layer-like, flake and block group in a fracture of Jurassic mudstone and oil shale, although some pore-filling hydrate was found in porous sandstone. The mechanism for gas hydrate formation in the Qilian Mountain permafrost is as follows: gas generation from source rock was controlled by tectonic subsidence and uplift--gas migration and accumulation was controlled by fault and tight formation--gas hydrate formation and accumulation was controlled by permafrost. Some control factors for gas hydrate formation in the Qilian Mountain permafrost were analyzed and validated through numerical analysis and laboratory experiments. CSMGem was used to estimate the gas hydrate stability zone in the Qilian permafrost at a depth of 100–400 m. This method was used to analyze the gas composition of gas hydrate to determine the gas composition before gas hydrate formation. When the overlying formation of gas accumulation zone had a permeability of 0.05 × 10⁻¹⁵ m² and water saturation of more than 0.8, gas from deep source rocks was sealed up to form the gas accumulation zone. Fracture-filling hydrate was formed in the overlap area of gas hydrate stability zone and gas accumulation zone. The experimental results showed that the lithology of reservoir played a key role in controlling the occurrence and distribution of gas hydrate in the Qilian Mountain permafrost.     

Middle and Upper Jurassic hydrocarbon potential of the Zagross Fold Belt,North Iraq

Structured organic matters of the Palynomorphs of mainly dinoflagellate cysts are used in this study for dating the limestone, black shale, and marl of the Middle Jurassic (Bajocian–Bathonian) Sargelu Formation, Upper Jurassic (Upper Callovian – Lower Oxfordian) Naokelekan Formation, Upper Jurassic (Kimeridgian and Oxfordian) Gotnia and Barsarine Formations, and Upper Jurassic – Lower Cretaceous (Tithonian-Beriassian) Chia Gara source rock Formations while spore species of Cyathidites australis and Glechenidites senonicus are used for maturation assessments of this succession. Materials' used for this palynological study are 320 core and cutting samples of twelve oil wells and three outcrops in North Iraq.Terpane and sterane biomarker distributions, as well as stable isotope values, were determined for oils potential source rock extracts of Jurassic-Lower Cretaceous strata to determine valid oil-to-source rock correlations in North Iraq. Two subfamily carbonate oil types-one of Middle Jurassic age (Sargelu) carbonate rock and the other of mixed Upper Jurassic/Cretaceous age (Chia Gara) with Sargelu sources as well as a different oil family related to Triassic marls, were identified based on multivariate statistical analysis (HCA & PCA). Middle Jurassic subfamily A oils from Demir Dagh oil field correlate well with rich, marginally mature, Sargelu source rocks in well Mk-2 near the city of Baiji. In contrast, subfamily B oils have a greater proportion of C₂₈/C₂₉ steranes, indicating they were generated from Upper Jurassic/Lower Cretaceous carbonates such as those at Gillabat oil field north of Mansuriyah Lake. Oils from Gillabat field thus indicate a lower degree of correlation with the Sargelu source rocks than do oils from Demir Dagh field.Palynofacies assessments are performed for this studied succession by ternary kerogen plots of the phytoclast, amorphous organic matters, and palynomorphs. From the diagram of these plots and maturation analysis, it could be assessed that the formations of Chia Gara and Sargelu are both deposited in distal suboxic to anoxic basin and can be correlated with kerogens classified microscopically as Type A and Type B and chemically as Type II. The organic matter, comprised principally of brazinophyte algae, dinoflagellate cysts, spores, pollen, foraminifera test linings, and phytoclasts in all these formations and hence affected with upwelling current. These deposit contain up to 18 wt% total organic matters that are capable to generate hydrocarbons within mature stage of thermal alteration index (TAI) range in Stalplin's scale (Staplin, 1969) of 2.7–3.0 for the Chia Gara Formation and 2.9–3.1 for the Sargelu Formation. Case study examples of these oil prone strata are; one 7-m (23-ft) thick section of the Sargelu Formation averages 44.2 mg HC/g S2 and 439 °C Tmax (Rock-Eval pyrolysis analyses) and 16 wt% TOC especially in well Mk-2 whereas, one 8-m (26-ft) thick section of the Chia Gara and 1-m (3-ft) section of Naokelekan Formations average 44.5 mg HC/g S2 and 440 °C Tmax and 14 wt% TOC especially in well Aj-8. One-dimension, petroleum system models of key wells using IES PetroMod Software can confirm their oil generation capability.These hydrocarbon type accumulation sites are illustrated in structural cross sections and maps in North Iraq.     

Diagenetic history of tight sandstones and gas entrapment in the Yulin Gas Field in the central area of the Ordos Basin,China

The Ordos Basin is a large cratonic basin with an area of 250,000 km² in central China. Upper Paleozoic coals and shales serve as gas source rocks with peak generation and migration at the end of the early Cretaceous. Recent exploration has verified the huge gas potential in the “basin-centered gas accumulation system” (BCGAS). However, the mechanism for the gas accumulation is controversial. With an integrated approach of thin-section petrography, ultra-violet fluorescence microscopy, fluid inclusion microthermometry, Raman microspectrometry, scanning electron microscopy, and X-ray diffractometry, we identified diagenetic trapping and evaluated the diagenetic history of sandstone reservoirs in the Yulin Gas Field in the central area, where structural, stratigraphic and/or sedimentary lithologic traps have not been found. It was revealed that three phases of diagenesis and hydrocarbon charging occurred, respectively, in the late Triassic, late Jurassic and at the end of the early Cretaceous. In the first two phases, acidic water entered the reservoir and caused dissolution and cementation, resulting in porosity increase. However, further subsidence and diagenesis, including compaction and cementation, markedly reduced the pore space. At the end of the early Cretaceous, the bulk of the gas migrated into the tight reservoirs, and the BCGAS trap was formed. In the updip portion of this system, cementation continued to occur due to low gas saturation and has provided effective seals to retain gas for a longer period of time than water block in the BCGAS. The mechanism for the gas entrapment was changed from water block by capillary pressure in the BCGAS to diagenetic sealing. The diagenetic seals in the updip portion of the sand body were formed after gas charging, which indicates that there is a large hydrocarbon exploration potential at the basin-centered area.     

High resolution characterization of a core from the Lower Jurassic Gordondale Member,Western Canada Sedimentary Basin

The Gordondale Member is a hydrocarbon source rock and potential unconventional reservoir that extends across northeastern British Columbia and central-northwestern Alberta. It is an organic-rich, calcareous, fossiliferous mudstone with a median total organic carbon value of 6.0 wt%. A total of 230 samples were collected from approximately 25 m of Gordondale Member core for organic matter analysis using Rock-Eval 6 analysis and organic petrology. Detailed core logging provides sedimentological context for organic matter characterization. The predominant organic material in the samples is solid bitumen and liptinite with lesser zooclast and inertinite. Most kerogen is Type II, autochthonous marine biomass, with minimal dilution by inert organic carbon. Rock-Eval T_max values and random reflectance measurements of solid bitumen indicate the samples are within the oil generation window. Solid bitumen contributes a substantial amount of hydrocarbon potential to the interval. A micro-reservoir structure within the core is produced by thin intervals of impermeable displacive calcite that act as barriers to the upward migration of free hydrocarbons. These free hydrocarbon accumulations could make excellent targets for horizontal wells within the Gordondale Member.     

Architecture of lacustrine mass-transport complexes in the Mesozoic Songliao Basin,China

3-D seismic data and wireline log profiles of the Central Depression in the Songliao Basin exhibit four lacustrine mass-transport complexes (MTCs) in the second and the third members of the Upper Cretaceous Nenjiang Formation. The mass-transport complex named MTC-A lies in the north of the Daqing Anticline with an area of approximately 95 km² and a maximum thickness of 62 m. It consists of five laterally and vertically stacked blocks striking E-W and has a convex-downslope front. The mass-transport complex named MTC-C is located in the south of the Daqing Anticline consisting of seven blocks. This MTC strikes NNE-SSW and has an area of approximately 61.5 km² and a maximum thickness of 55 m. MTC-B, the mass-transport complex lying in the middle of the Daqing Anticline, consists of three vertically stacked blocks and has a semi-circular outline striking E-W. MTC-B has an area of approximately 24 km² and a maximum thickness of 92 m. Along the Daqing Anticline from north to south, the three MTCs distribute in lacustrine facies in the NNE direction. The mass-transport complex named MTC-D located in the southeast of the Daqing Anticline has an area of approximately 150 km² with a maximum thickness of 135 m striking E-W, which is rich in mudstones. MTC-D is characterized by the three-layer architecture vertically consisting of a dragged layer at the bottom, a slumped layer in the middle, and a stable layer at the top. Besides, in the plane view, MTC-D can be divided into three parts according to the sliding distance and stacking pattern of the slip blocks: the detaching area, the stacking area and the drifting area. The MTCs are characterized by thickening upslope and thin-out downslope. Siltstones and very fine sandstones occur in 2–4 beds that are cumulatively 0.8–7 m thick in the upslope and central parts of the MTCs. The edges of the blocks are composed of mudstone. Seismic amplitude slices reveal arcuate or straight ridges on the block surfaces with a spacing density of 4–10 per kilometer and a height ranging from 25 to 40 m. The arcuate ridge paleo-morphology on the MTC surfaces suggests that blocks are slump bodies. The estimated minimum water depth at the time of the MTC emplacement is 30–70 m, and the sliding distance is 2–10 km. From 3-D seismic amplitude slices, no feeding channel connected to the mass-transport complexes is found. Besides, coupled with the continuous ridges on blocks and the clear and flat lateral edges suggest that mass-transport complexes belong to the prodelta slump bodies. Thus, the triggering mechanism of the MTCs may be closely related to earthquakes caused by volcanic activities with the evidence of three cinerite layers shown in the well cores.     

Thermal maturation, potential source rocks and hydrocarbon generation in Mesozoic rocks, Lougheed Island area, Central Canadian Arctic archipelago

Significant oil and gas accumulations occur in and around Lougheed Island, Arctic Canada, where hydrocarbon prospectivity is controlled by potential source rock distribution and composition. The Middle to Upper Triassic rocks of the Schei Point Group (e.g. Murray Harbour and Hoyle Bay formations) contain a mixture of Types I and II organic matter (Tasmanales marine algae, amorphous fluorescing bituminite). These source rocks are within the oil generation zone and have HI values up to 600 mg HC/g Corg. The younger source rocks of the Lower Jurassic Jameson Bay and the Upper Jurassic Ringnes formations contain mainly gas-prone Type II/III organic matter and are marginally mature. Vitrinite reflectance profiles suggest an effective geothermal gradient essentially similar to the present-day gradient (20 to 30°C/km). Maturation gradients are low, ranging from 0.125 to 0.185 log%Ro/km. Increases in subsidence rate in the Early Cretaceous suggest that the actual heat flow history was variable and has probably diminished from that time. The high deposition rates of the Christopher Formation shales coincide with the main phase of rifting in Aptian-Albian times. Uplift and increased sediment supply in the Maastrichtian resulted in a new sedimentary and tectonic regime, which culminated in the final phase of the Eurekan Orogeny. Burial history models indicate that hydrocarbon generation in the Schei Point Group took place during rifting in Early Cretaceous, long before any Eurekan deformation.     

Petroleum source rock characterisation and hydrocarbon generation modeling of the Cretaceous sediments in the Jiza sub-basin,eastern Yemen

Cretaceous sedimentary rocks of the Mukalla, Harshiyat and Qishn formations from three wells in the Jiza sub-basin were studied to describe source rock characteristics, providing information on organic matter type, paleoenvironment of deposition and hydrocarbon generation potential. This study is based on organic geochemical and petrographic analyses performed on cuttings samples. The results were then incorporated into basin models in order to understand the burial and thermal histories and timing of hydrocarbon generation and expulsion.The bulk geochemical results show that the Cretaceous rocks are highly variable with respect to their genetic petroleum generation potential. The total organic carbon (TOC) contents and petroleum potential yield (S₁ + S₂) of the Cretaceous source rocks range from 0.43 to 6.11% and 0.58–31.14 mg HC/g rock, respectively indicating non-source to very good source rock potential. Hydrogen index values for the Early to Late Cretaceous Harshiyat and Qishn formations vary between 77 and 695 mg HC/g TOC, consistent with Type I/II, II-III and III kerogens, indicating oil and gas generation potential. In contrast, the Late Cretaceous Mukalla Formation is dominated by Type III kerogen (HI < 200 mg HC/g TOC), and is thus considered to be gas-prone. The analysed Cretaceous source rock samples have vitrinite reflectance values in the range of 0.37–0.95 Ro% (immature to peak-maturity for oil generation).A variety of biomarkers including n-alkanes, regular isoprenoids, terpanes and steranes suggest that the Cretaceous source rocks were deposited in marine to deltaic environments. The biomarkers also indicate that the Cretaceous source rocks contain a mixture of aquatic organic matter (planktonic/bacterial) and terrigenous organic matter, with increasing terrigenous influence in the Late Cretaceous (Mukalla Formation).The burial and thermal history models indicate that the Mukalla and Harshiyat formations are immature to early mature. The models also indicate that the onset of oil-generation in the Qishn source rock began during the Late Cretaceous at 83 Ma and peak-oil generation was reached during the Late Cretaceous to Miocene (65–21 Ma). The modeled hydrocarbon expulsion evolution suggests that the timing of oil expulsion from the Qishn source rock began during the Miocene (>21 Ma) and persisted to present-day. Therefore, the Qishn Formation can act as an effective oil-source but only limited quantities of oil can be expected to have been generated and expelled in the Jiza sub-basin.     

Petroleum generation and charge history of the northern Dongying Depression,Bohai Bay Basin,China: Insight from integrated fluid inclusion analysis and basin modelling

The petroleum generation and charge history of the northern Dongying Depression, Bohai Bay Basin was investigated using an integrated fluid inclusion analysis workflow and geohistory modelling. One and two-dimensional basin modelling was performed to unravel the oil generation history of the Eocene Shahejie Formation (Es3 and Es4) source rocks based on the reconstruction of the burial, thermal and maturity history. Calibration of the model with thermal maturity and borehole temperature data using a rift basin heat flow model indicates that the upper interval of the Es4 source rocks began to generate oil at around 35 Ma, reached a maturity level of 0.7% R_o at 31–30 Ma and a peak hydrocarbon generation at 24–23 Ma. The lower interval of the Es3 source rocks began to generate oil at around 33–32 Ma and reached a maturity of 0.7% R_o at about 27–26 Ma. Oil generation from the lower Es3 and upper Es4 source rocks occurred in three phases with the first phase from approximately 30–20 Ma; the second phase from approximately 20–5 Ma; and the third phase from 5 Ma to the present day. The first and third phases were the two predominant phases of intense oil generation.Samples from the Es3 and Es4 reservoir intervals in 12 wells at depth intervals between 2677.7 m and 4323.0 m were investigated using an integrated fluid inclusion workflow including petrography, fluorescence spectroscopy and microthermometry to determine the petroleum charge history in the northern Dongying Depression. Abundant oil inclusions with a range of fluorescence colours from near yellow to near blue were observed and were interpreted to represent two episodes of hydrocarbon charge based on the fluid inclusion petrography, fluorescence spectroscopy and microthermometry data. Two episodes of oil charge were determined at 24–20 Ma and 4–3 Ma, respectively with the second episode being the predominant period for the oil accumulation in the northern Dongying Depression. The oil charge occurred during or immediately after the modelled intense oil generation and coincided with a regional uplift and a rapid subsidence, suggesting that the hydrocarbon migration from the already overpressured source rocks may have been triggered by the regional uplift and rapid subsidence. The expelled oil was then charged to the already established traps in the northern Dongying Depression. The proximal locations of the reservoirs to the generative kitchens and the short oil migration distance facilitate the intimate relationship between oil generation, migration and accumulation.     

赤水陆相碎屑岩天然气的成藏机理

贵州赤水地区的中浅层陆相碎屑岩油气勘探长期未引起充分重视。通过对实际资料的分析、对比、研究,认为陆相碎屑岩存在侏罗系和上三叠统须家河组两套烃源岩,具有一定的生烃潜力,但气源主要来自于下伏海相地层;沟通气源层与储层的断裂系统的存在对该区的油气成藏相当重要。赤水地区中浅层陆相碎屑岩气藏成藏模式属于深生浅聚成藏组合类型,具有多期运移聚集、喜山期调整成藏的特点。     

The source of highly overmature solid bitumens in the Permian coral reef paleo-reservoirs of the Nanpanjiang Depression

Solid bitumens occur extensively in Permian coral reefs of the Nanpanjiang Depression. Both potential source rocks and solid bitumens in the study area are highly overmature and have similar bulk carbon isotope values. It is difficult to perform an oil–source rock correlation study in this area based on only regular molecular geochemical methods and bulk carbon isotope values. Thus the covalently bound biomarkers released from solid bitumens and source rock kerogens by catalytic hydropyrolysis (HyPy), together with the geological settings, were taken into account in this oil–source rock correlation study. The distribution characteristics of covalently bound biomarkers suggest that the major source rock of the Longlin paleo-reservoir (in the midwest of the depression) solid bitumen should be the Middle Devonian mudstone, whereas the source rock of the Ziyun paleo-reservoir (in the north of the depression) solid bitumen should be the Lower Permian source rock. However, solid bitumens in the Ceheng and Wangmo paleo-reservoirs (in the middle of the depression) may be mainly sourced from the Middle Devonian source rock, but partly from the Permian source rock. Our bitumen–source rock correlation results are also supported by the petroleum geological settings of the study area, which indicate that the filling of those paleo-reservoirs was controlled by the matching of hydrocarbon generation and trap formation. Basically, the timing of hydrocarbon generation of the Middle Devonian source rocks matches well with the formation of Permian coral reef traps in the middle and midwest portions of the depression, but it is earlier than the formation of the Permian coral reef trap in the north of the depression. We show that our oil–source rock correlation study based on covalently bound biomarkers can provide reliable information for petroleum system analysis when highly overmature strata in South China are involved.