Modeling free gas content of the Lower Paleozoic shales in the Weiyuan area of the Sichuan Basin,China

Two sets of Lower Paleozoic organic-rich shales develop well in the Weiyuan area of the Sichuan Basin: the Lower Cambrian Jiulaodong shale and the Lower Silurian Longmaxi shale. The Weiyuan area underwent a strong subsidence during the Triassic to Early Cretaceous and followed by an extensive uplifting and erosion after the Late Cretaceous. This has brought about great changes to the temperature and pressure conditions of the shales, which is vitally important for the accumulation and preservation of shale gas. Based on the burial and thermal history, averaged TOC and porosity data, geological and geochemical models for the two sets of shales were established. Within each of the shale units, gas generation was modeled and the evolution of the free gas content was calculated using the PVTSim software. Results show that the free gas content in the Lower Cambrian and Lower Silurian shales in the studied area reached the maxima of 1.98–2.93 m³/t and 3.29–4.91 m³/t, respectively (under a pressure coefficient of 1.0–2.0) at their maximum burial. Subsequently, the free gas content continuously decreased as the shale was uplifted. At present, the free gas content in the two sets of shales is 1.52–2.43 m³/t and 1.94–3.42 m³/t, respectively (under a current pressure coefficient of 1.0–2.0). The results are roughly coincident with the gas content data obtained from in situ measurements in the Weiyuan area. We proposed that the Lower Cambrian and Lower Silurian shales have a shale gas potential, even though they have experienced a strong uplifting.     

Effects of composition and pore structure on the reservoir gas capacity of Carboniferous shale from Qaidam Basin,China

Shale adsorption and breakthrough pressure are important indicators of shale gas development and key factors in evaluating the reservoir capacities of shales. In this study, geochemical tests, pore-structure tests, methane adsorption tests, and breakthrough-pressure tests were conducted on shales from the Carboniferous Hurleg Formation in eastern Qaidam Basin. The effects of the shale compositions and pore structures on the adsorption and breakthrough pressures were studied, and the reservoir capacities of the shales were evaluated by analyzing the shale adsorptions and sealing effects. The results indicate that the organic carbon content was only one of factors in affecting the adsorption capacity of the shale samples while the effect of the clay minerals was limited. Based on the positive correlation between the adsorption capacity and specific surface area of the shale, the specific surface area of the micropores can be used as an indicator to determine the adsorption capacity of shale. The micro-fracturing of brittle minerals, such as quartz, create a primary path for shale gas breakthrough, whereas the expansion of clay minerals with water greatly increases the breakthrough pressure in the shale samples. Methane adsorption tests showed that maximum methane adsorption for shale samples Z045 and S039 WAS 0.107 and 0.09655 mmol/g, respectively. The breakthrough pressure was 39.36 MPa for sample S039, maintained for 13 days throughout the experiment; however, no breakthrough was observed in sample Z045 when subjected to an injected pressure of 40 MPa for 26 days. This indicates that sample Z045, corresponding to a depth of 846.24 m, exhibited higher adsorption capacity and a better reservoir-sealing effect than sample S039 (498.4 m depth). This study provides useful information for future studies of Qaidam Basin shale gas exploration and development and for evaluation of shale quality.     

Characterization of shale pore system: A case study of Paleogene Xin'gouzui Formation in the Jianghan basin,China

The pore size classification (micropore <2 nm, mesopore 2–50 nm and macropore >50 nm) of IUPAC (1972) has been commonly used in chemical products and shale gas reservoirs; however, it may be insufficient for shale oil reservoirs. To establish a suitable pore size classification for shale oil reservoirs, the open pore systems of 142 Chinese shales (from Jianghan basin) were studied using mercury intrusion capillary pressure analyses. A quantitative evaluation method for I-micropores (0–25 nm in diameter), II-micropores (25–100 nm), mesopores (100–1000 nm) and macropores (>1000 nm) within shales was established from mercury intrusion curves. This method was verified using fractal geometry theory and argon-ion milling scanning electron microscopy images. Based on the combination of pore size distribution with permeability and average pore radius, six types (I-VI) shale open pore systems were analyzed. Moreover, six types open pore systems were graded as good, medium and poor reservoirs. The controlling factors of pore systems were also investigated according to shale compositions and scanning electron microscopy images. The results show that good reservoirs are composed of shales with type I, II and III pore systems characterized by dominant mesopores (mean 68.12 vol %), a few macropores (mean 7.20 vol %), large porosity (mean 16.83%), an average permeability of 0.823 mD and an average pore radius (r_a) of 88 nm. Type IV pore system shales are medium reservoirs, which have a low oil reservoir potential due to the developed II-micropores (mean 57.67 vol %) and a few of mesopores (mean 20.19 vol %). Poor reservoirs (composed of type V and VI pore systems) are inadequate reservoirs for shale oil due to the high percentage of I-micropores (mean 69.16 vol %), which is unfavorable for the flow of oil in shale. Pore size is controlled by shale compositions (including minerals and organic matter), and arrangement and morphology of mineral particles, resulting in the developments of shale pore systems. High content of siliceous mineral and dolomite with regular morphology are advantage for the development of macro- and mesopores, while high content of clay minerals results in a high content of micropores.     

Effect of electrode contact impedance on A.C. electrical properties of a wet hematite sample

Electrode polarization is a major problem in the determination of dielectric properties of samples, particularly at low frequencies. Understanding of these interfacial phenomena is essential in order to measure correctly the electrical properties of a sample of interest. This paper presents a comparative study of the effect of electrode contact impedance on A.C. electrical properties of a partially and fully saturated hematitic sandstone sample. The electrical properties of the sample were first measured using stainless steel electrodes with high contact impedance, and measured again with a four terminal Cu–CuSO₄ electrode of low contact impedance. Complex impedance measurements at room temperature (~16°C) were performed in the frequency range from 1 Hz to 100 kHz. Measured electrical spectra vary strongly with the electrode type. The difference in the electrical properties between the two electrode types (stainless steel and Cu–CuSO₄) may be attributed to the surface contact impedance between the sample and the electrode. Experimental data indicate that the electrical properties vary strongly with water saturation. The dielectric constant decreases with frequency and increases with saturation up to a certain saturation limit then decreases. Charge transport can occur either through the bulk of the solid matrix (hematite or sand) or along the grain boundaries of aggregates (water). When soil minerals are exposed to water, exchangeable ions go into solution. Most of the ionic or covalent bonded rock forming minerals such as quartz, mica, and feldspars are nonconductors. When the surfaces of these minerals come into contact with liquid water, electrolytes are formed and ionic drift associated with the electrical field causes electrical conduction. The anomalous dielectric properties of partially saturated rocks can be interpreted using percolation theory. This theory predicts that when the conductive fraction (water) increases, clustering of conductive inclusions develops, and the thickness of insulating gaps between conductive clusters decreases, causing a large increment in the capacitance of the sample. Further increases in the conductive component causes the shunting of insulating capacitive gaps.     

Mineral types and organic matters of the Ordovician-Silurian Wufeng and Longmaxi Shale in the Sichuan Basin,China: Implications for pore systems,diagenetic pathways,and reservoir quality in fine-grained sedimentary rocks

Mineral types (detrital and authigenic) and organic-matter components of the Ordovician-Silurian Wufeng and Longmaxi Shale (siliceous, silty, argillaceous, and calcareous/dolomitic shales) in the Sichuan Basin, China are used as a case study to understand the control of grain assemblages and organic matter on pores systems, diagenetic pathway, and reservoir quality in fine-grained sedimentary rocks. This study has been achieved using a combination of petrographic, geochemical, and mercury intrusion methods. The results reveal that siliceous shale comprises an abundant amount of diagenetic quartz (40–60% by volume), and authigenic microcrystalline quartz aggregates inhibit compaction and preserve internal primary pores as rigid framework for oil filling during oil window. Although silty shale contains a large number of detrital silt-size grains (30–50% by volume), which is beneficial to preserve interparticle pores, the volumetric contribution of interparticle pores (mainly macropores) is small. Argillaceous shale with abundant extrabasinal clay minerals (>50% by volume) undergoes mechanical and chemical compactions during burial, leading to a near-absence of primary interparticle pores, while pores preserved between clay platelets are dominant with more than 10 nm in pore size. Pore-filling calcite and dolomite precipitated during early diagenesis inhibit later compaction in calcareous/dolomitic shale, but the cementation significantly reduces the primary interparticle pores. Pore-throat size distributions of dolomitic shale show a similar trend with silty shale. Besides argillaceous shale, all of the other lithofacies are dominated by OM pores, which contribute more micropores and mesopores and is positively related to TOC and quartz contents. The relationship between pore-throat size and pore volume shows that most pore volumes are provided by pore throats with diameters <50 nm, with a proportion in the order of siliceous (80.3%) > calcareous/dolomitic (78.4%) > silty (74.9%) > argillaceous (61.3%) shales. In addition, development degree and pore size of OM pores in different diagenetic pathway with the same OM type and maturity show an obvious difference. Therefore, we suggest that the development of OM pores should take OM occurrence into account, which is related to physical interaction between OM and inorganic minerals during burial diagenesis. Migrated OM in siliceous shale with its large connected networks is beneficial for forming more and larger pores during gas window. The result of the present work implies that the study of mineral types (detrital and authigenic) and organic matter-pores are better understanding the reservoir quality in fine-grained sedimentary rocks.     

Pore characteristic analysis of a lacustrine shale: A case study in the Ordos Basin,NW China

Organic shales deposited in a continental environment are well developed in the Ordos Basin, NW China, which is rich in hydrocarbons. However, previous research concerning shales has predominantly focused on marine shales and barely on continental shales. In this study, geochemical and mineralogical analyses, high-pressure mercury intrusion and low-pressure adsorption were performed on 18 continental shale samples obtained from a currently active shale gas play, the Chang 7 member of Yanchang Formation in the Ordos Basin. A comparison of all these techniques is provided for characterizing the complex pore structure of continental shales.Geochemical analysis reveals total organic carbon (TOC) values ranging from 0.47% to 11.44%, indicating that there is abundant organic matter (OM) in the study area. Kerogen analysis shows vitrinite reflectance (Ro) of 0.68%–1.02%, indicating that kerogen is at a mature oil generation stage. X-ray diffraction mineralogy (XRD) analysis indicates that the dominant mineral constituents of shale samples are clay minerals (which mainly consist of illite, chlorite, kaolinite, and negligible amounts of montmorillonite), quartz and feldspar, followed by low carbonate content. All-scale pore size analysis indicates that the pore size distribution (PSD) of shale pores is mainly from 0.3 to 60 nm. Note that accuracy of all-scale PSD analysis decreases for pores less than 0.3 nm and more than 10 μm. Experimental analysis indicates that mesopores (2–50 nm) are dominant in continental shales, followed by micropores (<2 nm) and macropores (50 nm–10 μm). Mesopores have the largest contribution to pore volume (PV) and specific surface area (SSA). In addition, plate- and sheet-shaped pores are dominant with poor connectivity, followed by hybrid pores. Results of research on factors controlling pore structure development show that it is principally controlled by clay mineral contents and Ro, and this is different from marine systems. This study has important significance in gaining a comprehensive understanding of continental shale pore structure and the shale gas storage–seepage mechanism.     

2D and 3D nanopore characterization of gas shale in Longmaxi formation based on FIB-SEM

Studying complex pore structures is the key to understanding the mechanism of shale gas accumulation. FIB-SEM (focused ion beam-scanning electron microscope) is the mainstream and effective instrument for imaging nanopores in gas shales. Based on this technology, 2D and 3D characteristics of shale samples from Lower Silurian Longmaxi formation in southern Sichuan Basin were investigated. 2D experimental results show that the pores in shale are nanometer-sized, and the structure of those nanopores can be classified into three types: organic pores, inorganic pores and micro fractures. Among the three types, organic pores are dominantly developed in the OM (organic matter) with three patterns such as continuous distributed OM, OM between clay minerals and OM between pyrite particles, and the size of organic pores range from 5 nm to 200 nm.Inveresly, inorganic pores and micro fractures are less developed in the Longmaxi shales. 3D digital rocks were reconstructed and segmented by 600 continuous images by FIB cutting and SEM imaging simultaneously. The pore size distribution and porosity can be calculated by this 3D digital core, showing that its average value is 32 nm and porosity is 3.62%.The 3D digital porosity is higher than its helium porosity, which can be regarded as one important parameter for evaluation of shale gas reserves. The 2D and 3D characterized results suggest that the nanometer-sized pores in organic matter take up the fundamental storage space for the Longmaxi shale. These characteristics have contributed to the preservation of shale gas in this complex tectonic area.     

Black shales in Ukraine – A review

As a result of a long-lasting and complex geological history, organic-matter-rich fine-grained rocks (black shales) with widely varying ages can be found on Ukrainian territory. Several of them are proven hydrocarbon source rocks and may hold a significant shale gas potential.Thick Silurian black shales accumulated along the western margin of the East European Craton in a foreland-type basin. By analogy with coeval organic-matter-rich rocks in Poland, high TOC contents and gas window maturity can be expected. However, to date information on organic richness is largely missing and maturity patterns remain to be refined.Visean black shales with TOC contents as high as 8% and a Type III-II kerogen accumulated along the axis of the Dniepr-Donets rift basin (DDB). They are the likely source for conventional oil and gas. Oil-prone Serpukhovian black shales accumulated in the shallow northwestern part of the DDB. Similar black shales probably may be present in the Lviv-Volyn Basin (western Ukraine).Middle Jurassic black shales up to 500 m thick occur beneath the Carpathian Foredeep. They are the likely source for some heavy oil deposits. TOC contents up to 12% (Type II) have been recorded, but additional investigations are needed to study the vertical and lateral variability of organic matter richness and maturity.Lower Cretaceous black shales with a Type III(-II) kerogen (TOC > 2%) are widespread at the base of the Carpathian flysch nappes, but Oligocene black shales (Menilite Fm.) rich in organic matter (4–8% TOC) and containing a Type II kerogen are the main source rock for oil in the Carpathians. Their thermal maturity increases from the external to the internal nappes.Oligocene black shales are also present in Crimea (Maykop Fm.). These rocks typically contain high TOC contents, but data from Ukraine are missing.     

Pore structure of Cambrian shales from the Sichuan Basin in China and implications to gas storage

The microstructure of black siliceous shale from the lower Cambrian Niutitang Formation, Sichuan Basin in China was investigated by the combination of field emission scanning electron microscope (FE-SEM) and argon ion beam milling. The nanometer-to micrometer-scale pore systems of shales are an important control on gas storage and fluid migration. In this paper, the organic porosity in shale samples within oil and gas window has been investigated, and the formation mechanism and diagenetic evolution of nanopores have been researched.FE-SEM reveals five pore types that are classified as follows: organic nanopores, pores in clay minerals, nanopores of framework minerals, intragranular pores in microfossils, and microfractures. Numerous organic nanopores are observed in shales in the gas window, whereas microfractures can be seen within the organic matter of shales in the oil window. Microfractures in oil window shales could be attributed to pressure buildup in the organic matter when incompressible liquid hydrocarbon are generated, and the orientation of microfractures is probably parallel to the bedding and strength anisotropy of the formation. Pores in clay minerals are always associated with the framework of clay flakes, and develop around rigid mineral grains because the pressure shadows of mineral grains protect pores from collapse, and the increasing of silt content would lead to an increase in pressure shadows and improve porosity. Nanopores of rock framework are probably related to dissolution by acidic fluids from hydrocarbon generation, and the dissolution-related pores promote permeability of shales. Porosity in the low-TOC, low-thermal-maturity shales contrast greatly with those of high-TOC, high-thermal-maturity shales. While the high-TOC shales contain abundant organic microporosity, the inorganic pores can contribute a lot to the porosity of the low-TOC shales.     

Stable carbon isotope ratios of CH4-rich gas inclusions in shale-hosted fracture-fill mineralization: A tool for tracing hydrocarbon generation and migration in shale plays for oil and gas

Fluid inclusion gases in minerals from shale hosted fracture-fill mineralization have been analyzed for stable carbon isotopic ratios of CH₄ using a crushing device interfaced to an isotope ratio mass spectrometer (IRMS). The samples of Paleozoic strata under study originate from outcrops and wells in the Rhenish Massif and Campine Basin, Harz Mountains, and the upper slope of the Southern Permian Basin. Fracture-fill mineralization hosted by Mesozoic strata was sampled from drill cores in the Lower Saxony Basin. Some studied sites are candidates for shale gas exploration in Germany. Samples of Mesozoic strata are characterized by abundant calcite-filled horizontal fractures which preferentially occur in TOC-rich sections of the drilled sediments. Only rarely are vertical fractures filled with carbonates and/or quartz in drill cores from Mesozoic strata but in Paleozoic shale they occur frequently. The δ¹³C(CH₄) values of fluid inclusions in calcite from horizontal fractures hosted by Mesozoic strata suggest that gaseous hydrocarbons were generated during the oil/early gas window and that the formation of horizontal fractures seems to be related to hydraulic expulsion fracturing. The calculated maturity of the source rocks at the time of gas generation lies below the maturity derived from measured vitrinite reflectance. Thus, the formation of horizontal fractures and trapping of gas that was generated in the oil and/or early gas window obviously occurred prior to maximal burial. Rapidly increasing vitrinite reflectance data seen locally can be explained by hydrothermal alteration, as indicated by increasing δ¹³C (CH₄–CO₂) values in fluid inclusions. The formation of vertical fractures in studied Mesozoic sediments is related to stages of post-burial inversion; gas-rich inclusions in fracture filling minerals recorded the migration of gas that had probably been generated instantaneously, rather than cumulatively, from high to overmature source rocks. Since no evidence is given for the presence of early generated gas in studied Paleozoic shale, it appears likely that major gas loss from shales occurred due to deformation and uplift of these sediments in response to the Variscan Orogeny.     

Geochemistry,reservoir characterization and hydrocarbon generation potential of lacustrine shales: A case of YQ-1 well in the Yuqia Coalfield,northern Qaidam Basin,NW China

Ever since a breakthrough of marine shales in China, lacustrine shales have been attracting by the policy makers and scientists. Organic-rich shales of the Middle Jurassic strata are widely distributed in the Yuqia Coalfield of northern Qaidam Basin. In this paper, a total of 42 shale samples with a burial depth ranging from 475.5 m to 658.5 m were collected from the Shimengou Formation in the YQ-1 shale gas borehole of the study area, including 16 samples from the Lower Member and 26 samples from the Upper Member. Geochemistry, reservoir characteristics and hydrocarbon generation potential of the lacustrine shales in YQ-1 well were preliminarily investigated using the experiments of vitrinite reflectance measurement, maceral identification, mineralogical composition, carbon stable isotope, low-temperature nitrogen adsorption, methane isothermal adsorption and rock eval pyrolysis. The results show that the Shimengou shales have rich organic carbon (averaged 3.83%), which belong to a low thermal maturity stage with a mean vitrinite reflectance (R_o) of 0.49% and an average pyrolytic temperature of the generated maximum remaining hydrocarbon (T_max) of 432.8 °C. Relative to marine shales, the lacustrine shales show low brittleness index (averaged 34.9) but high clay contents (averaged 55.1%), high total porosities (averaged 13.71%) and great Langmuir volumes (averaged 4.73 cm⁻³ g). Unlike the marine and marine-transitional shales, the quartz contents and brittleness index (BI) values of the lacustrine shales first decrease then increase with the rising TOC contents. The kerogens from the Upper Member shales are dominant by the oil-prone types, whereas the kerogens from the Lower Member shales by the gas-prone types. The sedimentary environment of the shales influences the TOC contents, thus has a close connection with the hydrocarbon potential, mineralogical composition, kerogen types and pore structure. Additionally, in terms of the hydrocarbon generation potential, the Upper Member shales are regarded as very good and excellent rocks whereas the Lower Member shales mainly as poor and fair rocks. In overall, the shales in the top of the Upper Member can be explored for shale oil due to the higher free hydrocarbon amount (S₁), whereas the shales in the Lower Member and the Upper Member, with the depths greater than 1000 m, can be suggested to explore shale gas.     

Heterogeneous nanoporosity of the Silurian Longmaxi Formation shale gas reservoir in the Sichuan Basin using the QEMSCAN,FIB-SEM,and nano-CT methods

Nanoporosity of a shale gas reservoir provides essential information on the gas accumulation space and controls the gas reserves. The characteristics of heterogeneous nanoporosity of four shale samples are analyzed by combining quantitative evaluation of minerals by scanning electronic microscopy (QEMSCAN), focused ion beam-scanning electron microscopy (FIB-SEM), and nano-CT. The representative elementary area (REA) is proposed by QEMSCAN to detect the imaging area that can represent the overall contents of minerals and organic matter. Combined with the statistics of pores in minerals and organic matter by FIB-SEM, the quantitative nanoporosity is obtained. The nano-CT is used to compare the total nanoporosity that was obtained by FIB-SEM. The results show that shale has distinct characteristics in nanoporosities due to the variation in organic matter and mineral content. The major pore sizes of the organic matter and clay minerals are smaller than 400 nanometers (nm), and the pore sizes of feldspar and pyrite are mainly 200–600 nm. The pore sizes for pores developed in quartz and carbonate minerals range from a few nanometers to 1000 nm. Furthermore, pores smaller than 400 nm mainly provide the total nanoporosity. The nanoporosities in the organic matter are approximately 17%–21%. Since the organic matter content (0.54%–6.98%) is low, the organic matter contributes approximately 5%–33% of the total nanoporosity in shale. Conversely, the nanoporosities in quartz and clay are generally lower than 3%. Since the mineral content (93.02%–99.46%) is obviously higher than the organic matter content, the minerals contribute approximately 67%–95% of the total nanoporosity in shale.     

Thermal maturity,source rock potential and kinetics of hydrocarbon generation in Permian shales from the Damodar Valley basin,Eastern India

This study investigates the source rock characteristics of Permian shales from the Jharia sub-basin of Damodar Valley in Eastern India. Borehole shales from the Raniganj, Barren Measure and Barakar Formations were subjected to bulk and quantitative pyrolysis, carbon isotope measurements, mineral identification and organic petrography. The results obtained were used to predict the abundance, source and maturity of kerogen, along with kinetic parameters for its thermal breakdown into simpler hydrocarbons.The shales are characterized by a high TOC (>3.4%), mature to post-mature, heterogeneous Type II–III kerogen. Raniganj and Barren Measure shales are in mature, late oil generation stage (Rr%_Raniganj = 0.99–1.22; Rr%_{Barren Measure} = 1.1–1.41). Vitrinite is the dominant maceral in these shales. Barakar shows a post-mature kerogen in gas generation stage (Rr%_Barakar = 1.11–2.0) and consist mainly of inertinite and vitrinite. The δ¹³C_org value of kerogen concentrate from Barren Measure shale indicates a lacustrine/marine origin (−24.6–−30.84‰ vs. VPDB) and that of Raniganj and Barakar (−22.72–−25.03‰ vs. VPDB) show the organic provenance to be continental. The δ¹³C ratio of thermo-labile hydrocarbons (C₁–C₃) in Barren Measure suggests a thermogenic source.Discrete bulk kinetic parameters indicate that Raniganj has lower activation energies (ΔE = 42–62 kcal/mol) compared to Barren Measure and Barakar (ΔE = 44–68 kcal/mol). Temperature for onset (10%), middle (50%) and end (90%) of kerogen transformation is least for Raniganj, followed by Barren Measure and Barakar. Mineral content is dominated by quartz (42–63%), siderite (9–15%) and clay (14–29%). Permian shales, in particular the Barren Measure, as inferred from the results of our study, demonstrate excellent properties of a potential shale gas system.     

Mineralogical and chemical distribution of the Es3L oil shale in the Jiyang Depression,Bohai Bay Basin (E China): Implications for paleoenvironmental reconstruction and organic matter accumulation

The Es₃^L (lower sub-member of the third member of the Eocene Shahejie Formation) shale in the Jiyang Depression is a set of relatively thick and widely deposited lacustrine sediments with elevated organic carbon, and is considered to be one of the most important source rocks in East China. We can determine the mineralogy, organic and inorganic geochemistry of the Es₃^L shale and calculate paleoclimate indexes by using multiple geochemical proxies based on organic chemistry (total organic carbon [TOC] and Rock-Eval pyrolysis), major and trace elements, X-Ray diffraction, and carbon and oxygen isotope data from key wells alongside ECS (Elemental Capture Spectroscopy) well log data. These indicators can be used to analyze the evolution of the paleoenvironment and provide a mechanism of organic matter (OM) accumulation. The Es₃^L oil shale has high TOC abundance (most samples >3.0%) and is dominated by Type I kerogens. Additionally, the organic-rich shale is rich in CaO and enrichment in some trace metals is present, such as Sr, Ba and U. The positive δ¹³C and negative δ¹⁸O values, high Sr/Ba, B/Ga and Ca/Ca + Fe ratios and low C/S ratios indicate that the Es₃^L shales were mainly deposited in a semi-closed freshwater-brackish water lacustrine environment. The consistently low Ti/Al and Si/Al ratios reflect a restricted but rather homogeneous nature for the detrital supply. Many redox indicators, including the Th/U, V/(V + Ni), and δU ratios, pyrite morphology and TOC-TS-Fe diagrams suggest deposition under dysoxic to suboxic conditions. Subsequently, the brackish saline bottom water evolved into an anoxic water body under a relatively arid environment, during which organic-lean marls were deposited in the early stage. Later, an enhanced warm-humid climate provided an abundant mineral nutrient supply and promoted the accumulation of algal material. OM input from algal blooms reached a maximum during the deposition of the organic-rich calcareous shale with seasonal laminations. High P/Ti ratios and a strongly positive relationship between the P and TOC contents indicate that OM accumulation in the oil shale was mainly controlled by the high primary productivity of surface waters with help from a less stratified water column. Factors such as the physical protection of clay minerals and the dilution of detrital influx show less influence on OM enrichment.     

Enrichment and distribution of shale oil in the Cretaceous Qingshankou Formation,Songliao Basin,Northeast China

The Songliao Basin is a large-scale petroliferous basin in China. With a gradual decline in conventional oil production, the exploration and development of replacement resources in the basin is becoming increasingly important. Previous studies have shown that the Cretaceous Qingshankou Formation (K₂qn) has favorable geological conditions for the formation of shale oil. Thus, shale oil in the Qingshankou Formation represents a promising and practical replacement resource for conventional oil. In this study, geological field surveys, core observation, sample tests, and the analysis of well logs were applied to study the geochemical and reservoir characteristics of shales, identify shale oil beds, build shale oil enrichment models, and classify favorable exploration areas of shale oil from the Cretaceous Qingshankou Formation. The organic matter content is high in shales from the first member of the Cretaceous Qingshankou Formation (K₂qn¹), with average total organic carbon (TOC) content exceeding 2%. The organic matter is mainly derived from lower aquatic organisms in a reducing brackish to fresh water environment, resulting in mostly type I kerogen. The vitrinite reflectance (Ro) and the temperature at which the maximum is release of hydrocarbons from cracking of kerogen occurred during pyrolysis (T_max) respectively range from 0.5% to 1.1% and from 430 °C to 450 °C, indicating that the K₂qn¹ shales are in the low-mature to mature stage (Ro ranges from 0.5% to 1.2%) and currently generating a large amount of oil. The favorable depth for oil generation and expulsion is 1800–2200 m and 1900–2500 m, respectively as determined by basin modeling. The reserving space of the K₂qn¹ shale oil includes micropores and mircofractures. The micropore reservoirs are developed in shales interbedded with siltstones exhibiting high gamma ray (GR), high resistivity (Rt), low density (DEN), and slightly abnormal spontaneous potential (SP) in the well-logging curves. The microfracture reservoirs are mainly thick shales with high Rt, high AC (acoustic transit time), high GR, low DEN, and abnormal SP. Based on the shale distribution, geochemical characteristics, reservoir types, fracture development, and the process of shale oil generation and enrichment, the southern Taikang and northern Da'an are classified as two favorable shale oil exploration areas in the Songliao Basin.     

Metagenetic methane generation in gas shales I. Screening protocols using immature samples

The gas generative potential of organic matter is one key parameter for the calculation of total gas in place (GIP) when evaluating thermogenic shale gas plays. Having first demonstrated that late gas-forming structures are present in coals of anthracite rank (>2% R₀) we go on to examine other rocks at the immature stage of maturity and report on how to recognise which might generate significant amounts of late dry gas at geologic temperatures well in excess of 200 °C in the zone of metagenesis (R₀ > 2.0%), i.e. subsequent to primary and secondary gas generation by thermal cracking of kerogen or retained oil. Such a distinction could clearly be of major value when assessing risks and pinning down “sweet spots”. A large selection (51 samples) of source rocks, i.e. shales and coals, stemming from different depositional environments and containing various types of organic matter which contribute to the formation of petroleum in putative gas shales were investigated using open- and closed-system pyrolysis methods for the characterisation of kerogen type, molecular structure, and late gas generative behaviour. A novel, rapid closed-system pyrolysis method, which consists of heating crushed whole rock samples in MSSV-tubes from 200 °C to 2 different end temperatures (560 °C; 700 °C) at 2 °C/min, provides the basis for a newly proposed approach to discriminate between source rocks with low, high, or intermediate late gas potential. It is noteworthy that late gas potential goes largely unnoticed when only open-system pyrolysis screening-methods are used. High late gas potentials seem to be mainly associated with heterogeneous admixtures or structures in terrestrially influenced, in some cases marine, Type III and Type II/III coals and shales. Aromatic and/or phenolic signatures are therefore indicative of the possible presence of elevated late gas potential at high maturities. High temperature methane was calculated to potentially contribute an additional 10–40 mg/g TOC, which would equal up to 30% of the total initial primary petroleum potential in many cases. Low late gas potentials are associated with homogeneous, paraffinic organic matter of aquatic lacustrine and marine origin. Source rocks exhibiting intermediate late gas potentials might generate up to 20 mg/g TOC late dry gas and seem to be associated with heterogeneous marine source rocks containing algal or bacterial derived precursor structures of high aromaticity, or with aquatic organic matter containing only minor amounts of aromatic/phenolic higher land plant material.     

Effects of oil expulsion and pressure on nanopore development in highly mature shale: Evidence from a pyrolysis study of the Eocene Maoming oil shale,south China

The influence of oil-expulsion efficiency on nanopore development in highly mature shale was investigated by using anhydrous pyrolysis (425–600 °C) on solvent-extracted and non-extracted shales at a pressure of 50 MPa. Additional pyrolysis studies were conducted using non-extracted shales at pressures of 25 and 80 MPa to further characterize the impact of pressure on pore evolution at high maturity. The pore structures of the original shale and relevant artificially matured samples after pyrolysis were characterized by using low-pressure nitrogen and carbon-dioxide adsorption techniques, and gas yields during pyrolysis were measured. The results show that oil-expulsion efficiency can strongly influence gas generation and nanopore development in highly mature shales, as bitumen remained in shales with low oil expulsion efficiency significantly promotes gaseous hydrocarbon generation and nanopore (diameter < 10 nm) development. The evolution of micropores and fine mesopores at high maturity can be divided into two main stages: Stage I, corresponding to wet gas generation (EasyRo 1.2%–2.4%), and Stage II, corresponding to dry gas generation (EasyRo 2.4%–4.5%). For shales with low oil expulsion efficiency, nanopore (diameter < 10 nm) evolution increases rapidly in Stage I, whereas slowly in Stage II, and such difference between two stages may be attributed to the changes of the organic matter (OM)’s mechanical properties. Comparatively, for shales with high oil expulsion efficiency, the evolution grows slightly in Stage I, not as rapidly as shales with low efficiency, and decays in Stage II. The different pore evolution behaviors of these two types of shales are attributed to the contribution of bitumen. However, the evolution of medium–coarse mesopores and macropores (diameter >10 nm) remains flat at high maturation. In addition, high pressure can promote the development of micropores and fine mesopores in highly mature shales.     

Pore characterization of organic-rich Lower Cambrian shales in Qiannan Depression of Guizhou Province,Southwestern China

Nine organic-rich shale samples of Lower Cambrian black shales were collected from a recently drilled well in the Qiannan Depression, Guizhou Province where they are widely distributed with shallower burial depth than in Sichuan Basin, and their geochemistry and pore characterization were investigated. The results show that the Lower Cambrian shales in Qiannan Depression are organic rich with TOC content ranging from 2.81% to 12.9%, thermally overmature with equivalent vitrinite reflectance values in the range of 2.92–3.25%, and clay contents are high and range from 32.4% to 53.2%. The samples have a total helium porosity ranging from 2.46% to 4.13% and total surface area in the range of 9.08–37.19 m²/g. The estimated porosity in organic matters (defined as the ratio of organic pores to the volume of total organic matters) based on the plot of TOC vs helium porosity is about 10% for the Lower Cambrian shales in Qiannan Depression and is far lower than that of the Lower Silurian shales (36%) in and around Sichan Basin. This indicates that either the organic pores in the Lower Cambrian shale samples have been more severely compacted than or they did not develop organic pores as abundantly as the Lower Silurian shales. Our studies also reveal that the micropore volumes determined by Dubinin–Radushkevich (DR) equation is usually overestimated and this overestimation is closely related to the non-micropore surface area of shales (i.e. the surface area of meso- and macro-pores). However, the modified BET equation can remove this overestimation and be conveniently used to evaluate the micropore volumes/surface area and the non-micropore surface areas of micropore-rich shales.     

Mechanical properties of organic matter in shales mapped at the nanometer scale

The mechanical properties of organic matter strongly affect the way shales deform and fracture. However, the way organic matter responds to mechanical stresses is poorly understood, representing a critical obstacle to assessing oil and gas production in shale formations. Little is known about the mechanical properties of organic matter in fine grained rocks primarily because it often occupies tiny nanometer-scale voids between the mineral grains which cannot be accessed using standard mechanical testing techniques. Here, we use a new atomic force microscopy technique (PeakForce QNM™) to map the mechanical properties of organic and inorganic components at the nanometer scale. We find that the method is able to distinguish between different phases such as pyrite, quartz, clays, and organic matter. Moreover, within the organic component Young's modulus values ranged from 0 to 25 GPa; in 3 different samples – all of which come from thermally mature Type II/III source rocks in the dry gas window – a modal value of 15–16 GPa was measured, with additional peaks measured at ≤10 GPa. In addition, the maps suggest that some porous organic macerals possess a soft core surrounded by a harder outer shell 50–100 nm thick. Thus, our results demonstrate that the method represents a powerful new petrographic tool with which to characterize the mechanical properties of organic-rich sedimentary rocks.     

Mineral carbon MinC(%) from Rock-Eval analysis as a reliable and cost-effective measurement of carbonate contents in shale source and reservoir rocks

The abundance of carbonate minerals in rocks is an important element for petroleum geochemists, geologists and engineers to consider during hydrocarbon exploration and production. Carbonate minerals can be related to the depositional environments of the source rocks and hence the type of organic matter that can be subsequently modified through diagenetic processes. The total carbonate content in shales can also be used to deduce their fracability as reservoir rock for shale gas/oil extraction. At present, mineralogical analysis by X-ray diffraction (XRD) is the most widely used technique in the oil and gas-related petrophysical and geochemical laboratories for identifying and quantifying carbonate minerals in rock samples. In contrast, the use of the total mineral carbon content parameter MinC (%) from Rock-Eval analysis has been limited despite (1) the parameter's effectiveness as demonstrated through instrument and methodology development; and (2) the presence of a large volume of Rock-Eval results due to its widespread use in the oil and gas industry.In this study, we acquired XRD and Rock-Eval analytical results on over nine hundred rock samples ranging from Ordovician to Cretaceous age from four petroleum sedimentary basins in Canada. Least-squares regression analyses produce empirical equations with R² values greater than 0.92 for the correlations between XRD total carbonate contents and the Rock-Eval MinC (%) values of six different suites of samples. This indicates that the MinC (%) values generated by Rock-Eval 6 and other instruments of similar capability can be used with confidence for estimating the amounts of total carbonates in sedimentary rock samples. While the correlation between the two types of carbonate content measurements is geology-specific, a global linear regression model (R² of 0.97) based on the large combined data set has been proposed for approximating the total carbonate abundances based on Rock-Eval MinC (%) values.