Mangrove sediments a sink for heavy metals? An assessment of Muthupet mangroves of Tamil Nadu,southeast coast of India

Mangrove forests are one of the most productive and biodiverse wetlands on earth. Yet, these unique coastal tropical forests are among the most threatened habitats in the world. Muthupet mangroves situated in the southeastern coast of India, has a reverse “L” shaped structure. Four cores were collected in 2008, sliced and subsampled at 2.5 cm length. The heavy metals (Mn, Cu, Zn, Ni, Pb, Cr, Cd) and other associated geochemical parameters were evaluated to determine pollution history of Muthupet. An evaluation of the status of heavy metal pollution through the index analysis approach was attempted by computing geoaccumulation index, anthropogenic factor, enrichment factor, contamination factor and degree of contamination, pollution load index and metal pollution index. To compensate for the natural variability of heavy metals in the core sediments, normalization using Al was carried out so that, any anthropogenic metal contributions may be detected and quantified. Results of the study reveal that significant metal contamination exists, and all the metals are found to be higher than continental crustal values. The fine sediments of Muthupet vary between uncontaminated and moderately contaminated with almost no enrichment (EF < 1) to severe enrichment (EF > 10). On comparison, the core collected close to aquafarms and dense mangrove forest (C3) is the most polluted core and the core retrieved where minor rivers drain (C2) is the least polluted.     

Palaeomagnetic and rock magnetic study of charnockites from Tamil Nadu,India, and the ‘Ur’ protocontinent in Early Palaeoproterozoic times

Palaeomagnetic and magnetomineralogical results are reported from charnockites in basement terrane at the eastern sector of the WSW–ENE granulite belt of South India. Magnetite is the dominant ferromagnet identified by rock magnetic and optical study; it is present in several phases including large homogeneous titanomagnetites and disseminated magnetite in microfractures linked to growth stages ranging from primary charnockite formation to uplift decompression and exhumation within the interval ～2500–2100 Ma. Several components of magnetization are resolved by thermal demagnetization and summarized by four pole positions; in the northern (Pallavaram) sector these are P1 (33°N, 99°E, dp/dm = 8/9°) and P2 (79°N, 170°E, dp/dm = 3/6°), and in the southern (Vandallur) sector they are V1 (23°N, 116°E, dp/dm = 8/9°) and V2 (26°S, 136°E, dp/dm = 5/10°). These magnetizations are linked to uplift cooling of the basement and unblocking temperature spectra suggest acquisition sequences P1 → P2 and V1 → V2 in each case implying movement of the shield from higher to lower palaeolatitudes sometime between 2500 and 2100 Ma. Palaeomagnetic poles from the cratonic nuclei of Africa, Australia and India all identify motion from higher to lower palaeolatitudes in Early Palaeoproterozoic times, and this is dated ～2400 and ～2200 Ma in the former two shields. The corresponding apparent polar wander (APW) segments match the magnetization record within the charnockite basement terranes of southern India to yield a preliminary reconstruction of the ‘Ur’ protocontinent, the oldest surviving continental protolith with origins prior to 3000 Ma. Although subject to later relative movements these nuclei seem to have remained in proximity until the Mesozoic break-up of Gondwana.     

Hydrochemistry of groundwater in a coastal region and its repercussion on quality,a case study—Thoothukudi district,Tamil Nadu,India

A hydrogeochemical study was conducted in Thoothukudi district situated in the southeast coast of Tamil Nadu, India to identify the influence of saltwater intrusion and suitability of groundwater for domestic and agricultural purposes. Scattered studies of this coastal region have reported signs of seawater intrusion, salt pan and industrial activity together with natural weathering process. To have a holistic picture of geochemical processes in the entire district, a total of 135 groundwater samples were collected and analyzed for major cations and anions. The geochemical parameters were compared with world and Indian standards and it was found that most samples are unsuitable for drinking purpose. The geochemical facies of the groundwater showed Na–Cl as the dominant water type indicating the saline nature of the groundwater. Chadda’s plots show that most of the samples fall in the Na–Cl type of water due to seawater intrusion. The samples were classified with parameters like sodium absorption ratio, residual sodium carbonate, total hardness, chloride, index to base exchange, electrical conductivity and facies to determine their suitability for irrigation purpose. It was inferred that the samples falling along the coast are not suitable for the irrigation purpose. The seawater-mixing percentage indicates that strong mixing was observed in the near shore and at the proximity of the salt pan. The permanent hardness was predominant in all the samples compared to the carbonate hardness reducing its domestic usability.     

Heavy mineral distribution and characterisation of ilmenite of Kayamkulam — thothapally Barrier Island, southwest coast of India

Mineral concentration and ilmenite characterization of the Thothapally — Kayamkulam Barrier Island of the southern Kerala has been studied. 96.86% concentrations of heavy minerals are recorded in the surficial and core samples (4 m) in the southern Kayamkulam and northern Thothapally areas. The total heavy mineral content decreases with depth. The primary heavy mineral suite of the surficial and core samples consists of ilmenite, sillimanite, zircon, garnets, rutile, monazite and magnetite. Longshore current and onshore-offshore movements of sediment during the southwest monsoon are primarily responsible in sorting of the heavy minerals. TiO₂ content in ilmenite is significantly higher in the Kayamkulam core sediments than the surface samples. XRD analysis supports intensive weathering and alteration leading to the higher TiO₂ concentration. Higher percentage of ferric iron than ferrous iron in the core samples reveals that considerable weathering occurred under burial condition. SEM examination of ilmenite grains reveal the presence of solution pit, chemical leaching, corrosion and replacement textures, supporting the intense epigenetic alteration and weathering under subaerial condition and post-depositional changes by water-table condition.     

Geotechnical characterization and analysis of rainfall—induced 2009 landslide at Marappalam area of Nilgiris district,Tamil Nadu state,India

Landslides are frequently occurring natural hazards in Nilgiris district of Tamil Nadu, India, particularly during monsoon season. The present study describes the geotechnical characterization and analysis of rainfall-induced landslide that occurred at Marappalam location of Nilgiris district on November 10, 2009. The detailed investigation comprises mapping of landslide, topographical survey, field and laboratory investigations, characterization of soil and rock, and numerical analysis. Field study comprises borehole and geophysical investigations. Detailed laboratory investigation was performed to identify index and engineering properties of soil and rock. Based on the results obtained from field and laboratory investigations, the generalized subsoil profile of Marappalam slope has been plotted. The investigations revealed that loose and soft soil layer with low permeability and plasticity interspersed with boulders could be the main source of debris flow. Scanning electron microscopic analysis and x-ray diffraction analysis were performed to study the influence of weathering on slope failure. Failure mechanism of Marappalam 2009 landslide was identified from the numerical analysis performed using landslide simulation program LS-RAPID. The analysis revealed that the 5-day antecedent rainfall (303 mm) and intense rainfall on 10th November 2009 (405 mm) saturate the slope due to infiltration of rainwater. This leads to a decrease in the matric suction and subsequent development of positive pore water pressure, which in turn reduces the shear resistance of the soil along with shear displacement, and resulted in a progressive failure.     

Grain size and geochemical partitioning of heavy metals in sediments of the Damodar River – a tributary of the lower Ganga, India

 The distribution of Si, Al, Fe, Mn, Cu, Zn, Ni and Cr in different grain-size fractions and geochemical association of Fe, Mn, Cu and Zn with <63-μm size fraction of bed sediments of Damodar River has been studied. In general, concentrations of heavy metals tend to increase as the size fractions get finer. However at two sites, near mining areas, the coarser particles show similar or even higher heavy metal concentrations than finer ones. The higher residence time and/or presence of coarser particles from mining wastes are possibly responsible for higher metal content in the coarser size fractions. The chemical fractionation study shows that lithogenic is the major chemical phase for heavy metals. Fe and Mn are the major elements of the lithogenic lattice, constituting 34–63% and 22–59%, respectively, of total concentrations. Fe-Mn oxide and organic bound fractions are significant phases in the non-lithogenic fraction. The carbonate fraction is less significant for heavy metal scavenging in the present environment and shows the following order of abundance Zn>Cu>Mn>Fe. The exchangeable fraction of the Damodar sediments contains very low amounts of heavy metals suggesting poor bioavailability of metals. Received: 18 August 1998 · Accepted: 1 December 1998     

Genesis of wollastonite- and grandite-rich skarns in a suite of marble-calc-silicate rocks from Sittampundi, Tamil Nadu: constraints on the P–T–fluid regime in parts of the Pan-African mobile belt of South India

The Pan-African tectonothermal activities in areas near Sittampundi, south India, are characterized by metamorphic changes in an interlayered sequence of migmatitic metapelites, marble and calc-silicate rocks. This rock sequence underwent multiple episodes of folding, and was intruded by granite batholiths during and subsequent to these folding events. The marble and the calc-silicate rocks develop a variety of skarns, which on the basis of mineralogy; can be divided into the following types: Type I: wollastonite?+?clinopyroxene (mg#?=?71–73)?+?grandite (16–21 mol% Adr)?+?quartz?±?calcite, Type II: grandite (25–29 mol% Adr )?+?clinopyroxene (mg#?=?70)?+?calcite?+?quartz, and Type III: grandite (36–38 mol% Adr)?+?clinopyroxene (mg#?=?55–65)?+?epidote?+?scapolite?+?calcite?+?quartz. Type I skarn is 2–10 cm thick, and is dominated by wollastonite (>70 vol%) and commonly occurs as boudinaged layers parallel to the regional foliation Sn₁ related to the Fn₁ folds. Locally, thin discontinuous lenses and stringers of this skarn develop along the axial planes of Fn₂ folds. The Type II skarn, on the other hand, is devoid of wollastonite, rich in grandite garnet (40–70 vol%) and developed preferentially at the interface of clinopyroxene-rich calc-silicates layers and host marble during the later folding event. Reaction textures and the phase compositional data suggest the following reactions in the skarns: 1. calcite?+?SiO₂?→?wollastonite?+?V, 2. calcite?+?clinopyroxene?+?O₂?→?grandite?+?SiO₂?+?V, 3. scapolite?+?calcite?+?quartz?+?clinopyroxene?+?O₂?→?grandite?+?V and 4. epidote?+?calcite?+?quartz?+?clinopyroxene?+?O₂?→?grandite?+?V Textural relations and composition of phases demonstrate that (a) silica metasomatism of the host marble by infiltration of aqueous fluids (X_CO2?<?0.15) led to production of large volumes of wollastonite in the wollastonite-rich skarn whereas mobility of FeO, SiO₂ and CaO across the interface of marble and calc-silicate and infiltration of aqueous fluids (X_CO2?<?0.35) were instrumental for the formation of grandite skarns. Composition of minerals in type II skarn indicates that Al₂O₃ was introduced in the host marble by the infiltrating fluid. Interpretation of mineral assemblages observed in the interlayered metapelites and the calcareous rocks in pseudosections, isothermal P-X_CO2 and isobaric T-X_CO2 diagrams tightly bracket the “peak” metamorphic conditions at c.9?±?1 kbar and 750°?±?30°C. Subsequent to ‘peak’ metamorphic conditions, the rocks were exhumed on a steeply decompressive P–T path. The estimated ‘peak’ P–T estimates are inconsistent with the “extreme” metamorphic conditions (>11 kbar and >950°C) inferred for the Pan-African tectonothermal events from the neighboring areas. Field and petrological attributes of these skarn rocks are consistent with the infiltration of aqueous fluid predominantly during the Fn₁ folding event at or close to the ‘peak’ metamorphic conditions. Petrological features indicate that the buffering capacity of the rocks was lost during the formation of type I and II skarns. However, the host rock could buffer the composition of the permeated fluids during the formation of type III skarn. Aqueous fluids derived from prograde metamorphism of the metapelites seem to be the likely source for the metasomatic fluids that led to the formation of the skarn rocks.     

Kaveri crater – An impact structure in the Precambrian terrain of southern India

The region to the east of Palghat gap is of low elevation and nearly circular in shape. It forms a part of the Kaveri river basin. The predominantly gneissic terrain is surrounded by the charnockitic hill ranges, prominent among which are Nilgiris and Biligirirangan to the north; and Anaimalai and Kodaikanal to the south. The charnockite massifs have a steep slope facing the circular feature and a gentler slope in the opposite direction. Fractures/faults/shear zones are noticed in many parts. The Bouguer anomaly in the gneissic terrain is elliptical in shape and positive, relative to the surrounding elevated region. The magnetic contours are also elliptical and the magnetic basement is deeper by about one km compared to regions in the periphery. The shallow seismic velocity picture from Chennimalai to Palani indicates a graben structure. The velocity structure also depicts a 4–5 km Moho upwarp near Chennimalai. Junction between the gneissic and charnockitic terrain and even beyond, is marked by the presence of pseudotachylites and breccia. Field and petrographic studies indicate presence of suevite, Planar Deformation Features (PDF), Planar Fractures, diaplectic glass of quartz and plagioclase and spherical inclusion in suevite. These evidences taken together point to an extra-terrestrial impact which created a crater of approximately 120 km in diameter. Several lines of indirect evidences point to Neoproterozoic age for the impact. Kaveri Crater is the fourth largest crater on the surface of the Earth; other larger craters being Vredefort (160 km), Chicxulub (150 km) and Sudbury (130 km).     

Hyperspectral satellite data (Hyperion) preprocessing—a case study on banded magnetite quartzite in Godumalai Hill, Salem, Tamil Nadu, India

This paper deals with many calibration methods involved in preprocessing of hyperspectral remote sensing data, while radiation calibration with respect to magnetite minerals without altering image reflectance. Radiometric calibration is the basis and important for both hyperspectral data applications and quantitative remote sensing. While at present there are many methods available for radiometric calibration in the spaceborne hyperspectral data, here, we used the highest spectral resolution Hyperion EO-1 satellite data using a variety of calibration models, which include the calibration model based on atmospheric radiation theory, conversion model as scene dependent such as flat field model, internal average reflectance model, logs residual modified model, and linear model based on the experience of the ground calibration, and so on, and hyperspectral data calibration study was implemented with magnetite mineral. After the above three models contrast, we have arrived at the conclusion that calibration model based on atmospheric radiation theory is the finest radiation calibration method for Hyperion satellite data preprocessing.     

Relationship between heavy metals and clay mineralogy of the modern sediment of salt marsh at the east coast of Wadden Sea, Denmark

Salt marshes play a significant roll in the marine and coast ecological systems. They can function as a sink for pollutants that would otherwise be harmful to the environment. Our investigation is mainly focused on clay mineralogy of the salt marsh sediment, metal associations in the environment of the modern （centennial） salt marsh sediment and possible relation between these metal associations and clay minerals involved. The studied salt marsh is located in the Skalingen Peninsula, West Denmark. About 85 percent of the deposited materials, including the heavy metals, was imported from the North Sea while only a small quantity of the materials was transported through the Varde River whose mouth is located about 10 km from the salt marsh, at the opposite side of the lagoon. A 25 cm high monolithic profile of the salt marsh sediment was collected and was cut into 1-cm slices. The rate of sediment accumulation, detailed grain size distribution, clay mineralogy, dating of the profile （^210Pb and ^137Cs）, content of organic matter as well as 17 metals： K, Ca, Ti, Mn, Fe, V, Cr, Co, Ni, Cu, Zn, Br, Rb, Sr, Y, Zr, Nb were investigated. Principal components and factor analyses demonstrated strong positive loadings for most of the studied metals, fine grain fractions as well as organic matter, indicating a close relation among these components. Mn, Fe, Ni, Cu, Zn, Rb were found best correlated to the clay fraction （〈2 microns）, which comprises primarily illite, kaolinite, minor chlorite and lesser smectite/illite mixed layer.     

Interstitial water – sediment geochemistry of N, P and Fe and its response to overlying waters of tropical estuaries: a case from the southwest coast of India

 The concentrations of N, P and Fe in surface sediments and interstitial and overlying (bottom and surface) waters of the Ashtamudi estuary located in the southwest coast of India are reported along with the various chemical species of N (NO₂–N, NO₃–N, NH₃–N and total N) and P (organic P, inorganic P and total P) in interstitial and overlying waters and discussed in terms of the physico-chemical environment of the system. The interstitial water exhibits higher salinity values compared to bottom and surface waters, indicating the coupled effects of salt-wedge phenomena and gravitational convection of more saline-denser marine water downward through surface sediments. N, P and Fe as well as their chemical forms are enriched in the interstitial water compared to bottom and surface waters. However, the dissolved oxygen (DO) shows an opposite trend. The marked enrichment of NH₃–N in the interstitial water and its marginal presence in bottom and surface waters, together with the substantial decrease in the DO concentrations of bottom water and consequent increase in the concentrations of NO₂–N and NO₃–N in interstitial and bottom waters, points to the nitrification process operating in the sediment-water interface of the Ashtamudi estuary. The enrichment of total N, P and Fe in the interstitial water compared to the overlying counterparts and the positive correlation of sediment N, P and Fe with mud contents as well as organic carbon indicate that these elements are liberated during the early diagenetic decomposition of organic matter trapped in estuarine muds. Received: 5 Oktober 1998 · Accepted: 9 February 1999     

Mass balance and morphological evolution of the Dokriani Glacier,central Himalaya,India during 1999–2014

Glaciological mass balance(MB)is considered the most direct,undelayed and unfiltered response of the glaciers to climatic perturbations.However,it may inherit errors associated with stake underrepresentation,averaging over the entire glacier and human bias.Therefore,proper validation of glaciological MB with geodetic MB is highly recommended by the World Glacier Monitoring Service(WGMS).The present study focuses on the Dokriani Glacier,central Himalaya which is one of the bench-mark glaciers in the region and has glaciological MB records from 1993 to 2013 with intermittent gaps.In the present study,firstly the glaciological MB series is extended to 2014 i.e.,field-based MB for one more year is computed and,to compare with it,the geodetic MB is computed for the 1999–2014 period using high resolution Cartosat-1 digital elevation model(DEM)and SRTM DEM.Finally,the study assesses the regional representation of the Dokriani Glacier in terms of MB and evaluates the influence of the MB regime on its morphological evolution.Results show that the average glaciological MB(-0.34±0.2 m water equivalent(w.e.)y-1)is more negative than the geodetic MB(-0.23±0.1 m w.e.y-1)for the 1999–2014 period.This is likely because of the partial representation of glacier margins in the glaciological MB,where melting is strikingly low owing to thick debris cover(>30 cm).In contrast,geodetic MB considers all marginal pixels leading to a comparatively low MB.A comparative assessment shows that the MB of Dokriani Glacier is less negative(possibly due to its huge accumulation area)than most other glacier-specific and regional MBs,restricting it to be a representative glacier in the region.Moreover,continuous negative MB has brought a peculiar change in the epiglacial morphology in the lower tongue of the glacier as differential debris thickness-induced differential melting has turned the glacier surface into a concave one.This concavity has led to development of a large(10–20 m deep)supraglacial channel which is expanding incessantly.The supraglacial channel is also connected with the snout wall and accelerates terminus disintegration.Given the total thickness of about 30–50 m in the lower glacier tongue,downwasting at its current pace,deepening/widening of supraglacial channel coupled with rapid terminus retreat may lead to the complete vanishing of the lower one km glacier tongue.     

Anisotropy of magnetic susceptibility (AMS) studies of Campanian–Maastrichtian sediments of Ariyalur Group,Cauvery Basin,Tamil Nadu,India: An appraisal to Paleocurrent directions

Oriented samples of sediments from Ariyalur Group, Cauvery Basin, south India, were studied for low field anisotropy of magnetic susceptibility (AMS) measurements to unravel the magnetic fabrics and paleocurrent directions. The results of AMS parameters of the sediments indicate primary depositional fabrics for Sillakkudi, Ottakovil and Kallamedu sandstone formations and secondary fabric for Kallankurichchi limestone formation. The obtained low degree of anisotropy (P _j ), oblate shape AMS ellipsoid and distribution of maximum (K ₁) and minimum (K ₃) susceptibility axes on equal area projection confirm the primary sedimentary fabric for Sillakkudi, Ottakovil and Kallamedu Formations. In the case of ferruginous, lower arenaceous, Gryphaea limestone and upper arenaceous limestone beds of Kallankurichchi Formation have recorded more than one fabric. The observed AMS parameters like shape factor (T) (prolate to oblate), q value and random distribution of minimum (K ₃) and maximum (K ₁) susceptibility axes are supported for secondary fabrics in Kallankurichchi Formation as a result of post-depositional processes. Based on petrographic studies, it can be established that K ₁ AMS axis of biotite mineral could represent the flow direction. The established paleocurrent direction for Sillakkudi is NW–SE direction while Ottakovil and Kallamedu Formations recorded NE–SW direction. Overall the paleoflow directions observed for Ariyalur Group is NE–SW to NW–SE.