All Equal-Area Map Projections Are Created Equal,But Some Are More Equal Than Others

High-resolution regional and global raster databases are currently being generated for a variety of environmental and scientific modeling applications. The projection of these data from geographic coordinates to a plane coordinate system is subject to significant areal error. Sources of error include users selecting an inappropriate projection or incorrect parameters for a given projection, algorithmic errors in commercial geographic information system (GIS) software, and errors resulting from the projection of data in the raster format. To assess the latter type of errors, the accuracy of raster projection was analyzed by two methods. First, a set of 12 one-degree by one-degree quadrilaterals placed at various latitudes was projected at several raster resolutions and compared to the projection of a vector representation of the same quadrilaterals. Second, several different raster resolutions of land cover data for Asia were projected and the total areas of 21 land cover categories were tabulated and compared. While equal-area projections are designed to specifically preserve area, the comparison of the results of the one-degree by one-degree quadrilaterals with the common equal area projections (e.g., the Mollweide) indicates a considerable variance in the one-degree area after projection. Similarly, the empirical comparison of land cover areas for Asia among various projections shows that total areas of land cover vary with projection type, raster resolution, and latitude. No single projection is best for all resolutions and all latitudes. While any of the equal-area projections tested are reasonably accurate for most applications with resolutions of eight-kilometer pixels or smaller, significant variances in accuracies appear at larger pixel sizes.     

Predicting the Impact of Coastal Development on Water Quality Using Remote Sensing and GIS‐assisted Hydrologic Modeling Techniques

Abstract

A decline in water quality in the Okatie River, a coastal estuary located in Beaufort County, SC, has resulted in the closure of several shellfish beds. Continuing urban development within the watershed has altered land cover conditions and may be contributing to the recent decline in water quality. Remote sensing and geographic information system (GIS) technology, coupled with a water quality model were used to spatially model stormwater runoff to understand the relationship between recent changes in land cover and watershed runoff characteristics. High spatial resolution imagery acquired in 1994 and 1996 spatially documented pre‐ and post‐development land cover conditions within the watershed. The water quality model Agricultural Nonpoint Source Pollution (AGNPS) evaluated land characteristics such as soil type, topography, and land cover to simulate surface water flow and sediment transport over past and current land cover conditions. Results of the model were used to locate net increases of fresh water discharge and to suggest best management practices (BMP).     

Modelling of non-point source pollution in a watershed using remote sensing and gis

Assessment of the environmental impact of Non Point Source (NPS) pollutants on a global, regional and localized scale is the key component for achieving sustainability of agriculture as well as preserving the environment. The knowledge and information required to address the problem of assessing the impact of NPS pollutants like Nitrogen (N), Phosphorus (P), etc., on the environment crosses several sub-disciplines like remote sensing, Geographical Information System (GIS), hydrology and soil science. The remote sensing data, by virtue of its potential like synopticity, multi-spectral and multi-temporal capability, computer compatibility, besides providing almost real time information, has enhanced the scope of automation of mapping dynamic elements, such as land use/land cover, degradation profile and computing the priority categorisation of sub-watersheds. The present study demonstrates the application of remote sensing, GIS and distributed parameter model Agricultural Non-Point Source Pollution Model (AGNPS) in the assessment of hazardous non-point source pollution in a watershed. The ARC-INFO GIS and remote sensing provided the input data to support modelling, while the AGNPS model predicted runoff, sediment and pollutant (N and P) transport within a watershed. The integrated system is used to evaluate the sediment pollution in about 2700 ha Karso watershed located in Hazaribagh area of Jharkhand State, India. The predicted values of runoff and sediment yield copared reasonably well with the measured values. It is important to emphasize that this study is not intended to characterise, in an exhaustive manner. Instead, the goal is to illustrate the implications and potential advantages of GIS and remote sensing based Hydrology and Water quality (H/WQ) modelling framework.     

Recent Literature

Development of a temporal geographic information system (GIS) and spatio-temporal data modeling are key to incorporating time into geographic information science. This paper describes how to design and develop temporal GIS that will work with spatio-temporal data represented in various data models, and it introduces a prototype temporal GIS with a case study. In temporal GIS, the integration of multiple spatio-temporal representations is based on common spatial and temporal reference systems. In other words, a map window of temporal GIS visualizes spatio-temporal data valid at the same time within one spatial area. To achieve such visualization, separate data editing and query modules are required for each spatio-temporal data model (STDM). In the temporal query interface, after a user specifies a time, the system automatically hires correspondent modules to retrieve spatio-temporal data valid at that time. Besides temporal queries common to all STDMs, each module may provide additional temporal query capabilities specific to that STDM. In the case study, I implement a prototype temporal GIS for three STDMs. The examples of query and visualization, which use three datasets (census data, land use/land cover, and elevation data) demonstrate the prototype temporal GIS can integrate multiple temporal representations.     

Precision rectification of high resolution satellite imagery without ephemeris data

The huge capability of high resolution satellite imageries (HRSI), that includes spatial, spectral, temporal and radiometric resolutions as well as stereoscopic vision introduces them as a powerful new source for the Photogrammetry, Remote Sensing and GIS communities. High resolution data increases the need for higher accuracy of data modeling. The satellite orbit, position, attitude angles and interior orientation parameters have to be adjusted in the geometrical model to achieve optimal accuracy with the use of a minimum number of Ground Control Points (GCPs). But most high resolution satellite vendors do not intend to publish their sensor models and ephemeris data. There is consequently a need for a range of alternative, practical approaches for extracting accurate 2D and 3D terrain information from HRSI. The flexibility and good accuracy of the alternative models demonstrated with KFA-1000 and the well-known SPOT level 1A images. A block of eight KFA-1000 space photos in two strips with 60% longitudinal overlap and 15% lateral sidelap and SPOT image with rational function, DLT, 2D projective, polynomials, affine, conformal, multiquadric and finite element methods were used in the test. The test areas cover parts of South and West of Iran. Considering the quality of GCPs, the best result was found with the DLT method with a RMSE of 8.44 m for the KFA-1000 space photos.     

Evaluation of global land cover maps for cropland area estimation in the conterminous United States

Global land cover data could provide continuously updated cropland acreage and distribution information, which is essential to a wide range of applications over large geographical regions. Cropland area estimates were evaluated in the conterminous USA from four recent global land cover products: MODIS land cover (MODISLC) at 500-m resolution in 2010, GlobCover at 300-m resolution in 2009, FROM-GLC and FROM-GLC-agg at 30-m resolution based on Landsat imagery circa 2010 against the US Department of Agriculture survey data. Ratio estimators derived from the 30-m resolution Cropland Data Layer were applied to MODIS and GlobCover land cover products, which greatly improved the estimation accuracy of MODISLC by enhancing the correlation and decreasing mean deviation (MDev) and RMSE, but were less effective on GlobCover product. We found that, in the USA, the CDL adjusted MODISLC was more suitable for applications that concern about the aggregated county cropland acreage, while FROM-GLC-agg gave the least deviation from the survey at the state level. Correlation between land cover map estimates and survey estimates is significant, but stronger at the state level than at the county level. In regions where most mismatches happen at the county level, MODIS tends to underestimate, whereas MERIS and Landsat images incline to overestimate. Those uncertainties should be taken into consideration in relevant applications. Excluding interannual and seasonal effects, R² of the FROM-GLC regression model increased from 0.1 to 0.4, and the slope is much closer to one. Our analysis shows that images acquired in growing season are most suitable for Landsat-based cropland mapping in the conterminous USA.     

地表覆盖遥感产品更新完善的研究动向

近年来,多尺度地表覆盖遥感产品的不断涌现,为环境变化研究、地球系统模拟、地理国(世)情监测和可持续发展规划等提供了重要科学数据。为更好地满足广大用户日益增长的应用需求,应对地表覆盖遥感产品进行持续更新完善,保持其时效性、增强时序性、丰富多样性。针对大面积地表覆盖遥感产品更新完善所面临的主要问题,介绍和评述了国内外有关研究动向,包括影像与众源信息相结合的更新、数据类型细化与完善、地表覆盖真实性验证,并作了简要展望。     

Species’ habitat use inferred from environmental variables at multiple scales: How much we gain from high-resolution vegetation data?

Spatial resolution of environmental data may influence the results of habitat selection models. As high-resolution data are usually expensive, an assessment of their contribution to the reliability of habitat models is of interest for both researchers and managers. We evaluated how vegetation cover datasets of different spatial resolutions influence the inferences and predictive power of multi-scale habitat selection models for the endangered brown bear populations in the Cantabrian Range (NW Spain). We quantified the relative performance of three types of datasets: (i) coarse resolution data from Corine Land Cover (minimum mapping unit of 25 ha), (ii) medium resolution data from the Forest Map of Spain (minimum mapping unit of 2.25 ha and information on forest canopy cover and tree species present in each polygon), and (iii) high-resolution Lidar data (about 0.5 points/m²) providing a much finer information on forest canopy cover and height. Despite all the models performed well (AUC > 0.80), the predictive ability of multi-scale models significantly increased with spatial resolution, particularly when other predictors of habitat suitability (e.g. human pressure) were not used to indirectly filter out areas with a more degraded vegetation cover. The addition of fine grain information on forest structure (LiDAR) led to a better understanding of landscape use and a more accurate spatial representation of habitat suitability, even for a species with large spatial requirements as the brown bear, which will result in the development of more effective measures to assist endangered species conservation.     

Integrating spectral and non-spectral data to improve urban settlement mapping in a large Latin-American city

ABSTRACT

Information on urban settlements is crucial for sustainability planning and management. While remote sensing has been used to derive such information, its applicability can be compromised due to the complexity in the urban environment. In this study, we developed a remote sensing method to map land cover types in a large Latin-American city, which is well known for its mushrooming unplanned and informal settlements. After carefully considering the landscape complexity there, we designed a data fusion method combining multispectral imagery and non-spectral data for urban and land mapping. Specifically, we acquired a cloud-free Landsat-8 image and two non-spectral datasets, i.e., digital elevation models and road networks. Then, we implemented a set of experiments with different inputs to evaluate their merits in thematic mapping through a supervised protocol. We found that the map generated with the multispectral data alone had an overall accuracy of 73.3% but combining multispectral imagery and non-spectral data yielded a land cover map with 90.7% overall accuracy. Interestingly, the thermal infrared information helped substantially improve both the overall and categorical accuracies, particularly for the two urban classes. The two types of non-spectral data were critical in resolving several spectrally confused categories, thus considerably increasing the mapping accuracy. However, the panchromatic band with higher spatial resolution and its derived textural measurement only generated a marginal accuracy improvement. The novelties of our work are with the successful separation between the two major types of urban settlements in a complex environment using a carefully designed data fusion approach and the insight into the relative merits of the thermal infrared information and non-spectral data in helping resolve the issue of class ambiguity. These findings should be valuable in deriving accurate urban settlement information which can further advance the research on socio-ecological dynamics and urban sustainability.     

Mapping deer habitat suitability using remote sensing and geographic information systems

This paper describes an effort to map the habitat for the Eastern Tehama Deer Herd located in Northern California. The range of this herd encompasses almost 600,000 hectares (1.5 million acres). Knowledge of the spatial distribution of suitable habitat is prerequisite to managing the deer herd. Remote sensing and GIS are appropriate tools for such an assessment. Remotely sensed data were used to map vegetation/land cover. These data along with elevation, aspect, slope, juxtaposition, and various buffer zones were input into a GIS and a model was used to produce a map of habitat suitability. The accuracy of the vegetation/land cover map was assessed and methods for validating the habitat suitability map are presented.     

地表覆盖分类数据对区域森林叶面积指数反演的影响

以江西省吉安市为研究区,将5种全球地表覆盖分类数据(包括美国地质调查局(USGS)、马里兰大学(UMD)和波士顿大学(BU)生成的3套数据和欧洲生成的2套数据)以及由TM影像生成的区域地表覆盖分类数据,分别与MODIS1km反射率资料结合,利用基于4尺度几何光学模型的LAI反演方法生成研究区的LAI。在1km和4km两种尺度上将反演的LAI与TM资料生成的LAI进行比较,评价地表覆盖分类数据对LAI反演结果的影响。结果表明,TM和欧洲太空局的GLOBCOVER地表覆盖分类数据用于反演LAI的结果较好,在1km尺度上,反演的LAI与统计模型估算的TMLAI相关的R2分别为0.44和0.40,在4km尺度上的R2分别为0.57和0.54;其次为波士顿大学的MODIS地表覆盖分类数据,据其反演的LAI与TMLAI相关的R2在1km和4km尺度上分别为0.38和0.51;而马里兰大学的UMD和欧洲的GLC2000地表覆盖分类数据会导致反演的LAI存在较大误差,据其反演的LAI与TMLAI之间的一致性较差,在1km和4km两种尺度上平均偏低20%左右;LAI的反演结果对聚集度系数具有强的敏感性。该研究表明,为了提高区域/全球LAI反演精度,需要有高质量的地表覆盖分类数据。     

Next generation of global land cover characterization,mapping, and monitoring

Land cover change is increasingly affecting the biophysics, biogeochemistry, and biogeography of the Earth's surface and the atmosphere, with far-reaching consequences to human well-being. However, our scientific understanding of the distribution and dynamics of land cover and land cover change (LCLCC) is limited. Previous global land cover assessments performed using coarse spatial resolution (300 m–1 km) satellite data did not provide enough thematic detail or change information for global change studies and for resource management. High resolution (∼30 m) land cover characterization and monitoring is needed that permits detection of land change at the scale of most human activity and offers the increased flexibility of environmental model parameterization needed for global change studies. However, there are a number of challenges to overcome before producing such data sets including unavailability of consistent global coverage of satellite data, sheer volume of data, unavailability of timely and accurate training and validation data, difficulties in preparing image mosaics, and high performance computing requirements. Integration of remote sensing and information technology is needed for process automation and high-performance computing needs. Recent developments in these areas have created an opportunity for operational high resolution land cover mapping, and monitoring of the world. Here, we report and discuss these advancements and opportunities in producing the next generations of global land cover characterization, mapping, and monitoring at 30-m spatial resolution primarily in the context of United States, Group on Earth Observations Global 30 m land cover initiative (UGLC).     

GIS applications for military operations in coastal zones

In order to successfully support current and future US military operations in coastal zones, geospatial information must be rapidly integrated and analyzed to meet ongoing force structure evolution and new mission directives. Coastal zones in a military-operational environment are complex regions that include sea, land and air features that demand high-volume databases of extreme detail within relatively narrow geographic corridors. Static products in the form of analog maps at varying scales traditionally have been used by military commanders and their operational planners. The rapidly changing battlefield of 21st Century warfare, however, demands dynamic mapping solutions. Commercial geographic information system (GIS) software for military-specific applications is now being developed and employed with digital databases to provide customized digital maps of variable scale, content and symbolization tailored to unique demands of military units. Research conducted by the Center for Remote Sensing and Mapping Science at the University of Georgia demonstrated the utility of GIS-based analysis and digital map creation when developing large-scale (1:10,000) products from littoral warfare databases. The methodology employed–selection of data sources (including high resolution commercial images and Lidar), establishment of analysis/modeling parameters, conduct of vehicle mobility analysis, development of models and generation of products (such as a continuous sea–land DEM and geo-visualization of changing shorelines with tidal levels)–is discussed. Based on observations and identified needs from the National Geospatial-Intelligence Agency, formerly the National Imagery and Mapping Agency, and the Department of Defense, prototype GIS models for military operations in sea, land and air environments were created from multiple data sets of a study area at US Marine Corps Base Camp Lejeune, North Carolina. Results of these models, along with methodologies for developing large-scale littoral warfare databases, aid the National Geospatial-Intelligence Agency in meeting littoral warfare analysis, modeling and map generation requirements for US military organizations.     

Choosing pasture maps: An assessment of pasture land classification definitions and a case study of Brazil

Pasture land occupies extensive areas and is increasingly of interest for sustainable intensification, land use diversification, greenhouse gas emission mitigation, and bioenergy expansion. Accurate maps of pasture and other managed land covers are needed for monitoring, intercomparison, assessing potential uses, and planning. Yet, land maps can be generated from different types of classification datasets – i.e. as a land use or land cover type – as well as different sources. In this study our aim was to assess and compare land use and land cover definitions for pasture, and examine variability in the resulting pasture land classification maps. First, we conducted a review of pasture definitions in commonly used mapping databases. We then performed a case study involving Brazil, a dominant global producer of pasture-based livestock. Six geospatial databases were harmonized and compared to each other and to MODIS land cover for Brazil including the Cerrado and Amazon biomes, which are internationally recognized for their ecological value. Total pasture area estimates for Brazil ranged by a factor greater than four, from about 430,000 km² to over 1.7 million km². Our analysis showed high variability in pasture land maps depending on the definitions, methods and underlying datasets used to generate them. The results are illustrative of a symptomatic problem for all manage land datasets, demonstrating the need for land categories studies and geospatial data resources that fully define land terms and describe measurable management attributes. Additionally, the suitability of individual geospatial datasets for different types of land mapping must be better described and reported. These recommendations would help bring more consistency in the consideration of managed lands in research, reporting, and policy development, as demonstrated here for pasture land using six case study datasets from multiple sources.     

A Validation of MODIS Snowcover Products in Romania: Challenges and Future Directions

The MODIS snowcover product is one of many geophysical products derived from MODIS data. A cross‐validation of the MODIS snowcover daily products with data obtained from the meteorological network stations was conducted for the entire territory of Romania. The validation time interval covered the period between 29 October, 2004 and 1 May, 2005. The overall accuracy for the whole set of cloud‐free useful data proved to be 95%. The validation time interval included the three common snow situations: (1) late autumn months where 37.1% of the initial set of the data was used, and the overall accuracy was 98.6%; (2) the “winter” months where the clouds reduced the set of useful data – 31.75%– and the overall accuracy was 93.7%; and (3) the months of February and March which returned the highest accuracy (> 95%). Additionally, a cross‐validation using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) high‐resolution imagery was carried out. Furthermore, the MODIS, meteorological data and ASTER data were integrated into a Geographic Information System (GIS) environment to perform flexible and comprehensive cross‐checking followed by a thematic analysis based on additional sets of data such as digital elevation models (DEMs) and land‐cover datasets.     

Characterization of biophysical land units using remote sensing and gis

In the present study, an attempt has been made to characterize the biophysical land units in Kanholi bara river basin of sub-humid tropical ecosystem of central India using remotely sensed data, field surveys and GIS based multi-criteria overlay analysis. The geo-spatial database on elevation, slope, landforms, soil depth, soil erosion, land use/land cover and hydrogeomorphological parameters has been generated using IRS-ID LISS-III satellite data coupled with soil survey data in GIS. The methodology followed in characterization of biophysical land units in GIS includes assigning scores for different classes of the layers and weighatges for different layers based on their characteristics and degree of influence on desired output. GIS based ‘multi criteria overlay’ analysis reveals seventeen distinct biophysical land units in the river basin. Severe (50.5-59.5) to very severe (59.5) biophysical stress units are found in plateau spurs, isolated mounds, linear ridges, dissected plateau and escarpments. These zones are associated with severe to very severe erosion, steep to very steep, extremely shallow soils, poor to very poor groundwater prospects, wastelands and scrublands. The characterization of biophysical land units helps in analysis of their potentials, problems and stress environment to plan and execute site-specific landscape management practices and maximize the productivity from each biophysical land unit. The present study demonstrates that generation of geo-spatial database based on remotely sensed data and field surveys in GIS and their analysis helps great extent in characterization of biophysical land units and analysis of their stress environment for management.     

Delineation and parameterization of banikdih watershed using remote sensing and avswat model

Delineation of Banikdih Agricultural watershed in Eastern India was carried out and various watershed parameters were extracted using Geographic Information System (GIS) and Remote Sensing. Digital Elevation Model (DEM) was developed with a contour interval of 10 m in the scale of 1:25000 using ARC/INFO modules. Sub watershed, drainage, slope, aspect, flow direction, soil series, soil texture, and soil class maps were independently generated and they were properly registered and integrated for analysis. The watershed was digitally delineated using AVSWAT model that couples hydrological model and GIS with appropriate threshold value of cell size. Subsequently, stream characteristics through the interface were generated. Indian Remote Sensing Satellite IRS-1D LISS-III data pertaining to the period of October 29, 1998 and October 23, 2000 was used to develop land use/land cover thematic map using ERDAS- 8.4 version image processing software. Eight major land use/land cover classes namely water body, lowland paddy, upland paddy, fallow land, upland crop (non-paddy crops), settlement, open mixed forest, and wasteland were segregated through digital image processing techniques using maximum likelihood algorithm. The information generated would be of immense help in hydrological modeling of watershed for prediction of runoff and sediment yield, thereby providing necessary inputs for developing suitable developmental management plans with sound scientific basis.     

东亚土地覆盖对ENSO事件的响应特征

对1982—1993年气候年际变化的强信号——ENSO进行了确认及再分类。以美国地质调查局EROS中心提供的AVHRR 8km NDVI为数据源，应用地理信息系统技术，计算了1982—1993年每年夏季(5—9月)NDVI平均影像。在此基础上用数据断面分析法对ENSO年东亚地区土地覆盖的空间分布进行了分析，再用主成分分析法对同一时间序列NDVI平均影像进行了运算，发现其第7主成分影像所反映的土地覆盖分布与数据断面分析法所反映的结果是一致的。对此，进一步分析了第7主成分的特征向量与代表ENSO变化特征的南方涛动指数(SOI)之间的关系，进而，对ENSO驱动下的东亚地区土地覆盖年际变化的空间分布特征进行了总结。     

Fusing MODIS with Landsat 8 data to downscale weekly normalized difference vegetation index estimates for central Great Basin rangelands,USA

Data fused from distinct but complementary satellite sensors mitigate tradeoffs that researchers make when selecting between spatial and temporal resolutions of remotely sensed data. We integrated data from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor aboard the Terra satellite and the Operational Land Imager sensor aboard the Landsat 8 satellite into four regression-tree models and applied those data to a mapping application. This application produced downscaled maps that utilize the 30-m spatial resolution of Landsat in conjunction with daily acquisitions of MODIS normalized difference vegetation index (NDVI) that are composited and temporally smoothed. We produced four weekly, atmospherically corrected, and nearly cloud-free, downscaled 30-m synthetic MODIS NDVI predictions (maps) built from these models. Model results were strong with R² values ranging from 0.74 to 0.85. The correlation coefficients (r ≥ 0.89) were strong for all predictions when compared to corresponding original MODIS NDVI data. Downscaled products incorporated into independently developed sagebrush ecosystem models yielded mixed results. The visual quality of the downscaled 30-m synthetic MODIS NDVI predictions were remarkable when compared to the original 250-m MODIS NDVI. These 30-m maps improve knowledge of dynamic rangeland seasonal processes in the central Great Basin, United States, and provide land managers improved resource maps.