Lead isotope systematics of the giant massive sulphide deposits in the Iberian Pyrite Belt

Lead isotope analyses were performed on 26 polymetallic massive sulphide deposits of the Iberian Pyrite Belt, as well as on overlying gossans and associated volcanic rocks. All the massive sulphide deposits (except for Neves-Corvo), and nearly all the volcanic rocks show very similar isotopic compositions grouped around 18.183 (²⁰⁶Pb/²⁰⁴Pb), 15.622 (²⁰⁷Pb/²⁰⁴Pb) and 38.191 (²⁰⁸Pb/²⁰⁴Pb), indicating that most of the ore deposit lead was derived from the same continental crust environment as the associated volcanic rocks. The isotopic compositions are representative of the average south Iberian crust during the Devonian to Early Carboniferous (Dinantian), and their constancy implies a homogenization of the mineralizing fluids before the deposition of the massive sulphides from hydrothermal fluids circulating through interconnected regional fracture systems. This isotopic constancy is incompatible with multiple, small, independent hydrothermal cells of the East Pacific Rise type, and fits much better with a model of hydrothermal convections driven by “magmatic floor heating”. Neves-Corvo is the only south Iberian massive sulphide deposit to have a heterogeneous isotopic composition with, in particular, a highly radiogenic stanniferous ore (²⁰⁶Pb/²⁰⁴Pb of the cassiterite is >18.40). A model of lead mixing with three components is proposed to explain these variations: (1) one derived from the Devonian to Early Carboniferous (Dinantian) continental crust that generated all the other massive ores; (2) an Eohercynian stanniferous mineralization partly remobilized during the formation of the massive sulphides, but independent of them; and (3) a Precambrian continental crust component. The juxtaposition of three different sources places Neves-Corvo in a specific paleogeographic situation that could also explain its mineralogical specificity. The geodynamic context that best explains all the obtained isotopic results is one of an accretionary prism. The fact that lead isotope signatures of the gossans are almost identical to those of the underlying massive sulphides means that this technique could be a useful exploration tool for the Iberian Pyrite Belt.     

Brine pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. I. Comparisons with the Iberian pyrite belt

The Ordovician Zn–Pb–Cu massive sulphide ore deposits of the Bathurst mining camp share many features with those of the Devonian/Carboniferous Iberian pyrite belt, particularly the tendency to large size (tonnage and metal content); shape, as far as can be determined after allowing for deformation; metal content, particularly Fe/Cu, Pb/Zn and Sn; mineral assemblages (pyrite + arsenopyrite ± pyrrhotite and lack or rarity of sulphates); sulphide textures (particularly framboidal pyrite); lack of chimney structures and rubble mounds; irregular metal or mineral zoning; and the low degree of zone refining compared to Hokuroku ores. The major differences between the provinces are the lack of vent complexes and the presence of Sn–Cu ores in the Iberian pyrite belt. There are also similarities in the geological setting of the two camps: both lie within continental terranes undergoing arc-continent and continent–continent collision, and in each case massive sulphide mineralisation followed ophiolite obduction; the ore deposits are associated with bimodal volcanic rocks derived from MORB and continental crust and marine shales; and mineralisation was locally accompanied or followed by deposition of iron formations.Fluid inclusion data from veins in stockworks from at least six of the Iberian massive sulphide deposits point to sulphide deposition having taken place in basins containing mostly spent saline, ore-forming fluids (brine pools), and it is suggested that most of the major features of the Bathurst deposits can be explained by similar processes. The proposed model is largely independent of ocean sulphate and O₂ content, whereas low values of each are requisites for the current, spreading-plume model of sulphide deposition in the Bathurst camp.     

Hydrothermalisme anté-Hercynien en Sud-Ibérie : apport de la géochimie isotopique du plombPre-Hercynian hydrothermalism in South Iberia: lead isotope geochemistry constraints

Lead isotope study has been performed on massive sulphide deposits of Ossa-Morena and Aracena Belt (South Iberia). Results suggest the existence of at least two ancient hydrothermal events. The first one, Upper Brioverian in age (～600–570 Ma), gave birth to Maria-Luisa and Puebla de la Reina massive sulphide deposits; it thus confirms the existence of a Cadomian orogen in South Iberia. Isotopic compositions indicate a local contribution of mantle-derived material (Maria Luisa mine), confirming the presence of ancient oceanic crust in Aracena Belt. This mineralising event seems to extend till the Armorican Massif. The second episode, Eo-Hercynian in age (～400–350 Ma) has allowed genesis of massive sulphide deposits of la Nava Paredon and Aguas Blancas, and could be coeval with the emplacement of South-Iberian massive sulphide ore deposits in the neighbouring South-Portuguese Zone. A more continental crustal source for later ore deposits could explain the much more important metal accumulation in this zone. To cite this article: É. Marcoux et al., C. R. Geoscience 334 (2002) 259–265.     

Regional thermal history of the Lennard shelf,Canning Basin,from apatite fission track analysis: Implications for the formation of Pb‐Zn ore deposits

Zinc mineralization in Devonian carbonates of the Lennard Shelf, northern Canning Basin is similar in many respects to that of the Mississippi Valley‐type including estimated minimum temperatures of sulphide precipitation between 70 and 110°C. Apparent apatite fission track ages for Precambrian granitic basement and for detrital apatites in Devonian carbonates in and near Pb‐Zn mineralization generally range between 260 and 340 Ma, with Precambrian samples tending to have slightly older apatite fission track ages than the Devonian carbonates. These apparent ages are younger than the stratigraphic age of the material analysed, indicating that appreciable annealing of fission tracks in apatite has occurred in post‐Devonian times. Mean horizontal confined track lengths are 12–13 μm for most samples and preclude attaching any ‘event’ significance to the fission track ages. Studies of well sequences (Grevillea 1 and Kennedia 1) indicate a period of rapid uplift in the area during the Late Triassic/Early Jurassic. Assuming a constant geothermal gradient of 30°C/km, approximately 1.5 km of uplift and erosion is estimated. Immediate thermal effects related to Miocene lamproite intrusion into Precambrian basement appear to be restricted to within 200 m of the contact zone.

For outcropping Devonian carbonates, a thermal history is proposed involving burial in the Late Palaeozoic/Early Mesozoic, followed by uplift and cooling from peak temperatures around 70–80°C in mid‐Mesozoic times. With reference to this period of burial, Pb‐Zn occurrences represent thermal anomalies when reported fluid inclusion homogenization temperatures are compared with the estimated peak temperatures. However the possibility of a phase of higher temperatures during the Late Devonian/ Early Carboniferous is suggested by the apatite fission track results, in which case sulphide mineralization may reflect ambient regional temperatures if it formed at that time. The absence of enhanced annealing effects in detrital apatites proximal to Pb‐Zn deposits suggests that either sulphide mineralization preceded or accompanied peak regional temperatures suspected during the Late Devonian/Early Carboniferous, or that the mineralizing episodes were of too short a duration to significantly anneal fission tracks in apatite.     

The Hercynian orogeny in the South Armorican Massif (Saint-Georges-sur-Loire Unit, Ligerian Domain, France): rifting and welding of continental stripes

A new approach to explain the Western Hercynian Belt is given by a lithological and structural study of the St-Georges-sur-Loire Unit (southern part of the French Armorican Massif). This unit is interpreted as a Devonian olistostrome sheared to the North. It is formed in an accretionary prism linked with a south-dipping subduction zone, called the Layon subduction zone. It results from a chaotic sedimentation including exotic blocks of various lithologies and ages in a Middle Devonian pebbly mudstone matrix. An inovative geodynamic model involving microblock rifting and collision is discussed to explain the presence of the St-Georges-sur-Loire Unit in the Armorican Massif. This model involves two Palaeozoic subductions and emphasizes the role of the Nort-sur-Erdre fault, considered as a major polyphase suture zone separating South and Central Armorica.     

Geology of massive sulphide deposits in the Spanish-Portuguese Pyrite Belt

The Spanish-Portuguese Pyrite Belt covers a large area in the SW part of the Iberian Peninsula from Seville to the westcoast of Portugal. Total reserves of aprox. 1.000 million tons of massive sulphide ores have an average content of 46% S, 42% Fe, and 2–4% Cu+Pb+Zn. The stratiform sulphide deposits and accompanying manganese mineralizations are of synsedimentary-exhalative origin. They occur in a Lower Carboniferous, geosynclinal, volcanic-sedimentary rock sequence, strongly folded during the Hercynian Orogeny. A brief outline of the regional geology of this ore province is given, and the geology of three mining districts is described: Lousal (Portugal), La Zarza and Tharsis (Huelva Province, Spain). A close relationship between sulphide and manganese ores with the submarine, acid alkaline volcanism is emphasized. Solfataric activity is responsible for the formation of sulphides in the final stages of volcanic extrusions. The ore concentration in big deposits (ore-lenses with up to 100 million tons of massive sulphides) has been due to inflows of sulphide muds and/or detrital sulphides into newly formed depressions of a contineously changing seafloor topography due to volcano tectonic movements.     

安徽铜陵冬瓜山铜、金矿床两阶段成矿模式

冬瓜山铜金矿床包括层状硫化物矿体、矽卡岩型和斑岩型矿体。层状硫化物矿体具层状形态和层控特征，矿石具块状、层纹状和揉皱状构造。燕山期岩浆岩及其岩浆流体对层状矿体进行了叠加和改造，改变了其结构构造、矿物组合和矿石成分，并在其上叠加蚀变和矿化。层状矿体中的铜是由含铜流体交代块状硫化物矿石形成的。冬瓜山铜金矿床经历了两次成矿作用：第一成矿阶段．在石炭纪中期，海底喷流作用形成了块状硫化物矿床，矿石成分以硫、铁矿为主；第二成矿阶段。燕山期岩浆侵人，一方面岩浆热液与围岩相互作用发生矽卡岩化、硅化、钾长石化、石英绢云母化和青磐岩化，形成矽卡岩型和斑岩型矿体，另一方面岩浆流体对块状硫化物矿体进行叠加改造，致使块状硫化物矿体富集铜等成矿物质。     

Draa Sfar, Morocco: A Visean (331 Ma) pyrrhotite-rich, polymetallic volcanogenic massive sulphide deposit in a Hercynian sediment-dominant terrane

Draa Sfar is a Visean, stratabound, volcanogenic massive sulphide ore deposit hosted by a Hercynian carbonaceous, black shale-rich succession of the Jebilet terrane, Morocco. The ore deposit contains 10 Mt grading 5.3 wt.% Zn, 2 wt.% Pb, and 0.3 wt.% Cu within two main massive sulphides orebodies, Tazakourt (Zn-rich) and Sidi M'Barek (Zn–Cu rich). Pyrrhotite is by far the dominant sulphide (70 to 95% of total sulphides), sphalerite is fairly abundant, chalcopyrite and galena are accessory, pyrite, arsenopyrite and bismuth minerals are rare. Pyrrhotite is monoclinic and mineralogical criteria indicate that it is of primary origin and not formed during metamorphism. Its composition is very homogeneous, close to Fe₇S₈, and its absolute magnetic susceptibility is 2.10^− 3 SI/g. Ar–Ar dating of hydrothermal sericites from a coherent rhyolite flow or dome within the immediate deposit footwall indicates an age of 331.7 ± 7.9 Ma for the Draa Sfar deposit and rhyolite volcanism.The Draa Sfar deposit has undergone a low-grade regional metamorphic event that caused pervasive recrystallization, followed by a ductile–brittle deformation event that has locally imparted a mylonitic texture to the sulphides and, in part, is responsible for the elongated and sheet-like morphology of the sulphide orebodies. Lead isotope data fall into two compositional end-members. The least radiogenic end-member, (²⁰⁶Pb/²⁰⁴Pb = 18.28), is characteristic of the Tazakourt orebody, whereas the more radiogenic end-member (²⁰⁶Pb/²⁰⁴Pb  18.80) is associated with the Sidi M'Barek orebody, giving a mixing trend between the two end-members. Lead isotope compositions at Draa Sfar testify to a significant continental crust source for the base metals, but are different than those of the Hajar and South Iberian Pyrite Belt VMS deposits.The abundance of pyrrhotite versus pyrite in the orebodies is attributed to low fO₂ conditions and neither a high temperature nor a low aH₂S (below 10^− 3) is required. The highly anoxic conditions required to stabilize pyrrhotite over pyrite are consistent with formation of the deposit within a restricted, sediment-starved, anoxic basin characterized by the deposition of carbonaceous, pelagic sediments along the flank of a rhyolitic flow-dome complex that was buried by pelitic sediments. Deposition of sulphides likely occurred at and below the seafloor within anoxic and carbonaceous muds.Draa Sfar and other Moroccan volcanogenic massive sulphide deposits occur in an epicontinental volcanic domain within the outer zone of the Hercynian belt and formed within a sedimentary environment that has a high pelagic component. In spite of the diachronous emplacement between the IPB deposits (late Devonian to Visean) and Moroccan deposits (Dinantian), all were formed around 340 ± 10 Ma following a major phase of the Devonian compression.     

Hercynian polyphase tectonics in the northeast French Massif Central: the closure of the Brévenne Devonian–Dinantian rift

 Field and laboratory structural studies show that the Devonian–Dinantian units of the northeast French Massif Central experienced a complex and contrasting tectonic–metamorphic evolution during the Hercynian orogeny. The structural analysis of the pre-Middle Visean Brévenne–Violay–Beaujolais rocks, in the Loire area, shows a polyphase tectonic evolution associated with greenschist to amphibolite facies metamorphism. The first event, D1, probably occurred in Early Tournaisian or Latest Devonian times. It is responsible for the flat-lying regional foliation and the NW/SE- to N/S-trending lineation. It is well observed in the Violay group and corresponds to the NW-vergent emplacement of the Late Devonian units upon their gneissic basement, represented by the Affoux gneisses. The second event, D2, is responsible for the NE/SW- to E/W-trending lineation. To the south, D2 deformation is locally reworked by the Grand-Chemin dextral wrench fault, around 345–350 Ma ago. This polyphase deformation is also found in several Devonian–Dinantian areas of the NE Massif Central, but not in Morvan. This tectonics corresponds to the Tournaisian closure, by northward thrusting and subsequent intracontinental deformation, of the oceanic Brévenne–Violay–Beaujolais rift which opened in Devonian times in a back-arc setting. Received: 4 September 1998 / Accepted: 27 May 1999     

~(40)Ar-~(39)Ar Age and Geological Significance of the Sawur Gold Belt in Northern Xinjiang, China

1 IntroductionThe Sawur gold belt is an eastward extending section ofthe Zarma-Sawur gold-copper belt in Kazakhstan, locatedin the Sawur Mountain, northern Xinjiang, and mainlycomprises two large- to medium-sized gold deposits,accompanied by five small gold deposits and a series ofgold ore spots (Yin et al., 1996, 2003; Wang et al., 1999; Liet al., 2000; Liu et al., 2003; Shen et al., 2004a). TheKuo'erzhenkuola and Bu'erkesidai gold deposits are thebiggest and most important ones in this …     

The Central Iberian arc, an orocline centered in the Iberian Massif and some implications for the Variscan belt

An arcuate structure, comparable in size with the Ibero-Armorican arc, is delineated by Variscan folds and magnetic anomalies in the Central Iberian Zone of the Iberian Massif. Called the Central Iberian arc, its sense of curvature is opposite to that of the Ibero-Armorican arc, and its core is occupied by the Galicia-Trás-os-Montes Zone of NW Iberia, which includes the Rheic suture. Other zones of the Iberian Massif are bent by the arc, but the Ossa-Morena and South Portuguese zones are not involved. The arc formed during the Late Carboniferous, at final stages of thermal relaxation and collapse, and an origin related with right-lateral ductile transpression at the scale of the Variscan belt is proposed. The Central Iberian arc explains the width of the Central Iberian Zone, clarifies the position of the allochthonous terranes of NW Iberia, and opens new perspectives for correlations with the rest of the Variscan belt, in particular, with the Armorican Massif, whose central zone represents the continuation of the southwest branch of the arc detached by strike-slip tectonics.     

Geological Characteristics and Metallogenic Setting of Representative Magmatic Cu‐Ni Deposits in the Tianshan‐Xingmeng Orogenic Belt,Central Asia

A great number of magmatic Cu-Ni deposits(including Kalatongke in Xinjiang and Hongqiling in Jilin) are distributed over a distance of almost 3000 km across the Tianshan-Xingmeng Orogenic Belt, from Tianshan Mountains in Xinjiang in the west, to Jilin in eastern China in the east. These deposits were formed during a range of magmatic episodes from the Devonian to the Triassic. Significant magmatic Cu-Ni-Co-PGE deposits were formed from the Devonian period in the Nalati arc(e.g. Jingbulake Cu-Ni in Xinjiang), Carboniferous period in the Puerjin-Ertai arc(e.g. Kalatongke Cu-Ni-Co-PGE in Xinjiang), Carboniferous period in the Dananhu-Touquan arc(e.g. Huangshandong, Xiangshan and Tulaergen in estern Tianshan, Xinjiang) to Triassic period in the Hulan arc(e.g. Hongqiling Cu-Ni in Jilin). In addition to the overall tectonic, geologic and distribution of magmatic Cu-Ni deposits in the Tianshan-Xingmeng Orogenic Belt, the metallogenic setting, deposit geology and mineralization characteristics of each deposit mentioned above are summarized in this paper. Geochronologic data of Cu-Ni deposits indicate that, from west to east, the metallogenic ages in the Tianshan-Xingmeng Orogenic Belt changed with time, namely, from the Late Caledonian(～440 Ma), through the Late Hercynian(300–265 Ma) to the Late Indosinian(225–200 Ma). Such variation could reflect a gradual scissor type closure of the paleo Asian ocean between the Siberia Craton and the North China Craton from west to east.     

U–Pb (zircon) and geochemical constraints on the age,origin, and evolution of Paleozoic arc magmas in the Oyu Tolgoi porphyry Cu–Au district,southern Mongolia

Uranium–Pb (zircon) ages are linked with geochemical data for porphyry intrusions associated with giant porphyry Cu–Au systems at Oyu Tolgoi to place those rocks within the petrochemical framework of Devonian and Carboniferous rocks of southern Mongolia. In this part of the Gurvansayhan terrane within the Central Asian Orogenic Belt, the transition from Devonian tholeiitic marine rocks to unconformably overlying Carboniferous calc-alkaline subaerial to shallow marine volcanic rocks reflects volcanic arc thickening and maturation. Radiogenic Nd and Pb isotopic compositions (ε_Nd(t) range from + 3.1 to + 7.5 and ²⁰⁶Pb/²⁰⁴Pb values for feldspars range from 17.97 to 18.72), as well as low high-field strength element (HFSE) contents of most rocks (mafic rocks typically have < 1.5% TiO₂) are consistent with magma derivation from depleted mantle in an intra-oceanic volcanic arc. The Late Devonian and Carboniferous felsic rocks are dominantly medium- to high-K calc-alkaline and characterized by a decrease in Sr/Y ratios through time, with the Carboniferous rocks being more felsic than those of Devonian age. Porphyry Cu–Au related intrusions were emplaced in the Late Devonian during the transition from tholeiitic to calc-alkaline arc magmatism. Uranium–Pb (zircon) geochronology indicates that the Late Devonian pre- to syn-mineral quartz monzodiorite intrusions associated with the porphyry Cu–Au deposits are ~ 372 Ma, whereas granodiorite intrusions that post-date major shortening and are associated with less well-developed porphyry Cu–Au mineralization are ~ 366 Ma. Trace element geochemistry of zircons in the Late Devonian intrusions associated with the porphyry Cu–Au systems contain distinct Th/U and Yb/Gd ratios, as well as Hf and Y concentrations that reflect mixing of magma of distinct compositions. These characteristics are missing in the unmineralized Carboniferous intrusions. High Sr/Y and evidence for magma mixing in syn- to late-mineral intrusions distinguish the Late Devonian rocks associated with giant Cu–Au deposits from younger magmatic suites in the district.     

Imagerie sismique de la zone de collision hercynienne dans le Sud-Est du Massif armoricain (projet Armor 2/programme Géofrance 3D)

The structure of the Hercynian collision zone in the southeast of the Armorican Massif is illustrated by a 70-km long deep seismic profile acquired in September 2000. The profile images a previously unknown south-dipping thrust that brought the Champtoceaux Domain on top of the Central Armorican Domain during Carboniferous times. Dextral strike-slip motions along the South Armorican Shear Zone, which is downward cut by the thrust zone, are partly coeval with northward thrusting. A major discontinuity, hidden by the thrust front, is also imaged in the lower crust between the Champtoceaux area and the Central Armorican Domain. These new data lead to a structural and kinematic re-interpretation of this part of the Hercynian collision zone. To cite this article: A. Bitri et al., C. R. Geoscience 335 (2003).     

The hydrothermal system of Central Jebilet (Variscan Belt,Morocco): A genetic association between bimodal plutonism and massive sulphide deposits?

Central Jebilet (Moroccan Variscan Belt) hosts several Cu and Pb–Zn massive sulphide deposits that are associated with a suite of gabbroic and microgranitic, tholeiitic to alkaline, intrusions emplaced 330 Ma ago. The intrusions and ore bodies form structural lineaments within marine Visean shales that are affected by very low to low-grade post-Visean metamorphism and contemporaneous shortening accompanied by the development of conjugate ductile to brittle shear zones. The ductile shear zones are localised in thermally softened aureoles around magmatic intrusions, while brittle deformation is common far from the intrusions. The intrusions have induced a contact metamorphism that reaches the hornblende hornfels facies, and their emplacement was accompanied by hydrothermal activity that leached base metals from the felsic intrusions.The massive sulphide deposits consist of steeply dipping elongate lenses that are located in shear zones 1–1.5 km away from the intrusions. They are dominated by pyrrhotite (up to 90%), sphalerite, galena, chalcopyrite, pyrite and arsenopyrite forming a mylonitic texture. Their wall rocks are altered to syntectonic mineral assemblages similar to those found in the alteration zones associated with the magmatic intrusions. The massive sulphide deposits located near the felsic intrusions are rich in lead and zinc compared to those located near the mafic intrusions, which are copper deposits. These relationships indicate that the whole Central Jebilet hydrothermal system could be described in terms of a lateral secretion of base metals from source zones (i.e. bimodal intrusions) to discharge zones (i.e. the Jebilet sulphide deposits). The metapelites in the contact metamorphic zone around felsic intrusions contain zincian ilmenite that was probably related to interaction of the host rocks with chlorine-rich fluid carrying zinc and other metals leached from the microgranites.     

新疆青河县玉勒肯-哈腊苏叠加改造型斑岩铜金(钼)矿床地质特征及成因

玉勒肯哈腊苏斑岩铜金(钼)矿床位于准噶尔盆地东北缘,卡拉先格尔斑岩铜矿带北西端.该矿床含矿斑岩为海西早期花岗闪长斑岩和花岗斑岩,围岩为中泥盆统北塔山组火山-沉积岩系,同时还有海西晚期和印支期岩浆岩(热)活动的记录.在整个斑岩铜矿带中,玉勒肯矿床构造作用最为强烈,主要受到区域额尔齐斯和二台断裂带多期构造活动的影响,矿区大部分含矿斑岩和围岩发生了不同程度的片理化或糜棱岩化作用.矿石矿物的赋存状态,除早期细脉浸染状斑岩型矿化外,还叠加有后期的沿片理面、糜棱面理,及破劈理分布的细脉状矿化.同位素年代学研究表明,玉勒肯矿区记录了从泥盆纪到三叠纪的构造、岩浆和成矿事件.综合本文及前人研究资料,本文认为卡拉先格尔斑岩铜矿带,在中-晚泥盆世(390～360Ma)时处于与俯冲有关的岛弧构造背景,有中酸性斑岩侵入以及斑岩型Cu-Mo矿化;早石炭世(360 ～ 330Ma)时,经历了碰撞阶段的改造成矿作用,矿化沿糜棱面理发育;中晚石炭世(330～300Ma)为后碰撞阶段,发育以辉钼矿-黄铜矿-钾长石脉为特征的叠加成矿;早二叠世(270 ～ 260Ma)进入造山后伸展阶段,形成以沿破劈理面分布的叠加成矿;进入三叠纪以后,为陆内造山阶段,也见少量脉状矿化.可见,玉勒肯哈腊苏矿床是一个具叠加改造成矿特色的斑岩型矿床.     

Indicator minerals as guides to base metal sulphide mineralisation in Betul Belt, central India

Zn-bearing minerals that act as indicator minerals for base metal sulphide mineralization from the Proterozoic Betul Belt, central India with special emphasis on their genetic significance have been discussed. Sulphide mineralisation is hosted by the felsic volcanic rocks and has similarities with volcanic-hosted massive sulphide deposits in other parts of the world. Synvolcanic hydrothermal alteration is crudely zoned with an inner high Mg-Ca core and an outer wider envelop of Al-Fe rich mineral assemblage. Most of the prospects have strata bound, moderately to steeply dipping, multiple, sub-parallel sheet like ore bodies composed of disseminated and semi-massive to massive ores. Zn-bearing spinel, staurolite, biotite and ilmenite typically occur within the foot-wall alteration zones in close proximity to the sulphide mineralization. Zincian spinel is ubiquitous irrespective of the nature of alteration zone. Zincian staurolite is nearly absent in Mg-Ca alteration zones but commonly present in Al-Fe alteration zone along with zincian ilmenite. Zn-bearing biotite in intimate association with zincian spinel is generally found in Mg-Ca alteration zone and in the transition to Al-Fe alteration zone. Most of these indicator minerals can be considered as products of desulphidation of sphalerite during metamorphism. Mechanisms other than desulphidation like formation of gahnite by overstepping of the zinc saturation limit of biotite during retrogression to chlorite and formation of zincian staurolite at the expense of gahnite is also recorded. Field presence of these minerals has immense significance in exploration in Betul Belt as they occur in close spatial relationship with the sulphide rich zones and therefore act as direct vectors to ore.     

巴尔喀什成矿带Cu-Mo-W矿床的辉钼矿Re-Os同位素年龄测定及其地质意义

巴尔喀什成矿带是世界著名的中亚成矿域斑岩型铜钼成矿带,产出许多斑岩型铜钼矿床和一些石英脉-云英岩型钨钼矿床。中亚成矿域可能是一个多核成矿系统,具有以走滑断裂为边界构成的断裂构造体系并受之控制。本文对巴尔喀什成矿带巴尔喀什—阿克沙套地区11件辉钼矿样品进行了Re-Os同位素分析,得到博尔雷大型斑岩型铜(钼)矿床和东科翁腊德、扎涅特、阿克沙套石英脉-云英岩型钨钼矿床的辉钼矿模式年龄(平均值)分别为315.9Ma、298.0Ma、295.0Ma和289.3Ma;其中,东科温腊德、阿克沙套和扎涅特等3个矿床的Re-Os等时线年龄为297.9-+30..949Ma,MSWD值为0.97。辉钼矿Re-Os年龄说明巴尔喀什成矿带Cu-Mo-W成矿作用发生在315.9～289.3Ma期间,Cu-Mo-W矿床的形成可分为两期:一期为斑岩型铜钼矿床,约形成于315.9Ma;另一期为石英脉-云英岩型钨钼矿床,约形成于297.9Ma。根据辉钼矿模式年龄和等时线年龄,推测该地区花岗斑岩和伟晶岩的形成时代与相应的矿床基本同时,均为晚石炭世,属海西期构造岩浆活动的产物。通过与我国境内西、东准噶尔和东天山斑岩铜矿带的对比表明,巴尔喀什成矿带铜钼成矿作用的年龄介于东天山土屋—延东斑岩铜矿与西准噶尔包古图斑岩铜矿之间。分析表明,中亚成矿域大规模斑岩型铜钼成矿作用集中在晚石炭世,属海西晚期构造-岩浆活动的产物。     

Paleozoic Tectono-Metallogeny in the Tianshan-Altay Region, Central Asia

The research on Paleozoic tectonics and endogenic metallogeny in the Tianshan-Altay region of Central Asia is an important and significant project. The Altay region, as a collision zone of the Early Paleozoic(500–397 Ma), and the Tianshan region, as a collision zone of the early period in the Late Paleozoic(Late Devonian-Early Carboniferous, 385–323 Ma), are all the result of nearly N-S trending shortening and collision(according to recent magnetic orientation). In the Late Devonian-Early Carboniferous period(385–323 Ma), regional NW trending faults displayed features of dextral strike-slip motion in the Altay and Junggar regions. In the Tianshan region, nearly EW-trending regional faults are motions of the thrusts. However, in the Late Carboniferous-Early Permian period(323–260 Ma), influenced by the long-distance effect induced from the Ural collision zone, those areas suffered weaker eastward compression, the existing NW trending faults converted into sinistral strike-slip in the Altay and Junggar regions, and the existing nearly E-W trending faults transferred into dextral strike-slip faults in the Tianshan region. The Rocks of those regions in the Late Carboniferous-Early Permian period(323–260 Ma) were moderately ruptured to a certain tension-shear, and thus formed a number of world famous giant endogenic metal ore deposits in the Tianshan-Altay region. As to the Central Asian continent, the most powerful collision period may not coincide with the most favorable endogenic metallogenic period. It should be treated to "the orogenic metallogeny hypothesis" with caution in that region.     

东天山铜金多金属矿床成矿系统和成矿地球动力学模型

近年来，在东天山地区地质找矿不断取是突破，一系列大型，中型铜金矿床先后被发现。绝大多数铜金矿床在空间上密集分布于黄山－康古尔缝合－剪切带两侧的岛弧带内，时间上集中在石炭纪－二叠纪。金矿床包括造山型，石英脉型和浅成低温热液型，铜矿床包括斑岩型，夕卡岩型和热液脉型及铜镍硫化物型，金，铜和铜镍矿化各自成系统产出，为板块俯冲晚期和碰撞期大规模镁铁质－超镁铁质和中酸性－酸性花岗质岩浆侵位－喷发事件的产物。