Arsenic contamination at the Mole River mine,northern New South Wales

Mining and processing of arsenopyrite ore at the Mole River mine in the 1920–1930s resulted in abandoned mine workings, waste dumps and an arsenic oxide treatment plant. Weathering of waste material (2.6–26.6 wt% As) leads to the formation of water soluble, As‐bearing mineral salts (pharmacolite, arsenolite, krautite) and sulfates which affect surface waters after rainfall events. Highly contaminated soils, covering about 12 ha at the mine, have extreme As (mean 0.93 wt%) and elevated Fe, Ag, Cu, Pb, Sb and Zn values compared with background soils (mean 8 ppm As). Regionally contaminated soils have a mean As content of 55 ppm and the contaminated area is estimated to be 60 km². The soils have acquired their metal enrichments by hydromorphic dispersion from the dissolution of As‐rich particulates, erosion of As‐rich particulates from the dumps, and atmospheric fall‐out from processing plant emissions. Stream sediments within a radius of 2 km of the mine display metal enrichments (62 ppm to 27.5 wt% As) compared with the mean background of 23 ppm As. This enrichment has been caused by erosion and collapse of waste‐dump material into local creeks, seepages and ephemeral surface runoff, and erosion and transportation of contaminated soil into the local drainage system. Water samples from a mine shaft and waste‐dump seepages have the lowest pH (4.1) and highest As values (up to 13.9 mg/L), and contain algal blooms of Klebsormidium sp. The variable flow regime of the Mole River causes dilution of As‐rich drainage waters to background values (mean 0.0086 mg/L As) within 2.5 km downstream. Bioaccumulation of As and phytotoxicity to lower plants has been observed in the mine area, but several metal‐tolerant plant species (Angophora floribunda, Cassinia laevis, Chrysocephalum apiculatum, Cymbopogon refractus, Cynodon dactylon, Juncus subsecundus and Poa sieberiana) colonise the periphery of the contaminated site.     

Environmental geochemistry of the derelict Webbs Consols mine,New South Wales,Australia

Small-scale mining and mineral processing at the Webbs Consols polymetallic PbZnAg deposit in northern New South Wales, Australia has caused a significant environmental impact on streams, soils and vegetation. Unconfined waste rock dumps and tailings dams are the source of the problems. The partly oxidised sulphidic mine wastes contain abundant sulphides (arsenopyrite, sphalerite, galena) and oxidation products (scorodite, anglesite, smectite, Fe-oxyhydroxides), and possess extreme As and Pb (wt% levels) and elevated Ag, Cd, Cu, Sb and Zn values. Contemporary sulphide oxidation, hardpan formation, crystallisation of mineral efflorescences and acid mine drainage generation occur within the waste repositories. Acid seepages (pH 1.9–6.0) from waste dumps, tailings dams and mine workings display extreme As, Pb and Zn and elevated Cd, Cu and Sb contents. Drainage from the area is by the strongly contaminated Webbs Consols Creek and although this stream joins and is diluted by the much larger Severn River, contamination of water and stream sediments in the latter is evident for 1–5 km, and 12 km respectively, downstream of the mine site. The pronounced contamination of local and regional soils and sediments, despite the relatively small scale of the former operation, is due to the high metal tenor of abandoned waste material and the scarcity of neutralising minerals. Any rehabilitation plan of the site should include the relocation of waste materials to higher ground and capping, with only partial neutralisation of the waste to pH 4–5 in order to limit potential dissolution of scorodite and mobilisation of As into seepages and stream waters.     

Spatial variability of soils and stream sediments and the remediation effects in a Portuguese uranium mine area

The old Senhora das Fontes uranium mine, located in central Portugal, was closed down in 1971. The treatment of ores from this mine and other mines by heap-leach ended in 1982. Seven dumps partially covered by vegetation were left in the area. Soil and stream sediment samples were collected in December 2009. The remediation was carried out from May 2010 to January 2011. Stream sediment samples were collected again in October 2013. Before the remediation, soils from inside the mine influence area have higher Al, As, Co, Cr, Cu, Fe, Ni, Sr, Th, U and Zn concentrations than soils from outside this area, due to radionuclides, metals and metalloid released from the mine dumps. The principal component analysis (PCA) shows a distinction between soils from inside and outside the mine influence area. The U(VI), As(V) and metals from soils can be adsorbed to Fe-oxyhydroxides and the humic acid can increase the U uptake. Soils must not be used for public or private green and residential areas, because they are contaminated in U, As, Co, Cd and Ni. Before the remediation, downstream sediments have higher Al, As, Cu, Mn, Ni, Pb, U and Zn than upstream sediments, due to erosion and percolation of water through the mine dumps. The PCA shows a distinction between downstream and upstream sediments. The U(VI), Th and As(V) can be adsorbed to Fe-oxyhydroxides. The stream sediments are contaminated in As, Mn, Th and U. Downstream sediments are the most contaminated in U and As. After the remediation, upstream and downstream sediments have generally higher Al, Fe, As, Cr, Ni, Th, U and Zn concentrations than before the remediation, attributed to the relocation of dumps. Radionuclides, metals and metalloids were transported by surface water. Consequently downstream sediments have higher Al, As, Cu, Mn, Ni, Th, U and Zn concentrations than upstream sediments. The U(VI), Th and As(V) can be adsorbed to Fe-oxyhydroxides. Stream sediments became more contaminated in U, Th and As than before the remediation, but more intensively downstream.     

Environmental geochemistry of the Gulf Creek copper mine area, north-eastern New South Wales, Australia

 Past mining and smelting of sulphide ore (pyrite-chalcopyrite-sphalerite) at the abandoned Gulf Creek mine has resulted in a stream highly contaminated by acid mine drainage (pH: 2.2–3.4), as well as degradation of local soil and vegetation. Physical dispersion of secondary metal-bearing minerals from abandoned ore and waste dumps into Gulf Creek and adsorption and coprecipitation of dissolved metals and metalloids in the stream bed cause elevated Ag, As, Cd, Cu, Fe, Pb and Zn values in stream sediments. The bioavailability of individual heavy metals to freshwater organisms changes downstream, however, selective bioaccumulation processes in algae reject readily bioavailable Zn and concentrate less bioavailable Cu. Polluted soils in the vicinity of the mine and smelter sites are subject to continuing soil erosion and either support no vegetation, or a depauperate flora with certain species showing bioaccumulation of metals and resistance to high metal contents. Rehabilitation of disturbed areas should involve covering and sealing sulphidic mine waste or removal of ore and waste dumps, installation of a physical and chemical plant or construction of a wetland environment (plus anoxic lime drains), and import of topsoil and planting of local, metal-tolerant plant species. Received: 17 March 1998 / Accepted: 6 October 1998     

The environmental risk posed by small dumps of complex arsenic,antimony, nickel and cobalt sulphides

Mine waste dumps sited in the vicinity of mine workings typically consist of fragmented rock masses which in chemical terms may be defined as "complex systems", due to uncertainties in accurately simulating their behaviour, when water or aqueous solutions percolate through them. Remediation of the contamination problems created by abandoned mine dumps concerns many former mining areas from Europe to Africa. These dumps usually range in size from a few hundred thousand up to million cubic meters of rock defined as “waste” but which still contain significant amounts of potentially toxic elements. Although relatively small, they are often densely distributed in the territory impacting on surface and ground-water. This scenario is particularly applicable to the region of Sardinia, Italy, where several small dumps of uncommon sulphide minerals still exist on derelict mine sites. This paper reports on the results of a research project aimed at defining appropriate remedial measures of acid rock drainage. A dump of a Co–Ni–As–Sb complex sulphides mine was investigated and simulated in a laboratory leaching column. The column was irrigated with distilled water and a repetitive behaviour of the polluting elements concentrations in the effluents was observed for each run. Regardless of the campaign duration and the extent of the intervals between tests metal ions concentration peaks (250–50 ppm for Ni, 35–20 ppm for Co, 1.6–0.4 ppm for As, 20–15 ppm for Zn and 0.03–0.002 ppm for Sb) and acidic conditions (pH 2.5–3.5), on resumption of each irrigation, was noticed. As percolation continued, the ion concentrations decreased within the discharge limits after the replacement of only two pore volumes of the column material. This produces the conception that a sufficiently long rainfall period could remediate the polluting effects. Conception contradicted by field experiences: sporadic rainfall events, typical of the region, are not sufficient to completely leach out the metal ions. The repetitive nature of the leaching processes, both quantitatively and qualitatively, can be explained only by the activity of a microflora thriving in the rock mass even during long dry periods. Microbial tests and neutralisation campaigns confirmed this hypothesis and suggested that any effective remediation strategy must take into consideration the interaction between environmental factors with microbiological activities.     

Ordinary kriging and indicator kriging in the cartography of trace elements contamination in São Domingos mining site (Alentejo, Portugal)

The abandoned pyrite mine of São Domingos, in the southeast Portugal is still an acid mine drainage generator and a source for trace elements pollution. This study aims to evaluate and map the soils and sediments chemical pollution. With this purpose three test sites located in the vicinities of the mine were sampled for soils, sediments and mining waste materials. The samples were analysed for pH, organic carbon, iron oxides and total content of As, Cu, Cr, Hg, Pb, Sb, U, Zn, Mn, S, Fe Al, Ca, K, Mg and P. The hyperspectral image of the test sites was acquired using the aero transported sensor HymapTM. Chemical analysis and hyperspectral images data were processed to estimate the contamination maps by multivariate data analysis, ordinary kriging, cokriging and indicator kriging methodologies.The test sites located downstream the mine open pit, are highly contaminated mainly in As, Hg, Pb and Sb, but no contamination was found in the third test site, upstream the mining site. The acid mining drainage seems to be the main spreading agent of chemical contaminants mostly originating from the mine waste materials. Factorial analysis and the geostatistical methodologies allowed several approaches for the contamination cartography of mining areas.     

Estimation of potential pollution of waste mining dumps at Peña del Hierro (Pyrite Belt,SW Spain) as a base for future mitigation actions

Peña del Hierro is an abandoned mine site located in the catchment area of the Tinto river (Pyrite Belt, SW Spain). As leaching from the spoils affect the quality of the stream water, the waste dumps have been characterized for mineralogy, geochemistry and granulometry to obtain an estimate of the potential pollution. Waste rock dumps in Peña del Hierro are very heterogeneous and are mainly composed of acid volcanic tuffs > gossan > shales > roasted pyrite ashes > floated pyrite. The volcanic tuffs, the gossan and the shales coexist in the same piles. The roasted pyrite ashes and the floated pyrite form more homogeneous dumps. The dissolution of pyrite concentrated in pyrite ashes and floated pyrite units can generate acid mine drainage. Nevertheless, acid volcanic tuffs, which are rich in pyrite and have no neutralizing minerals, are the main source of these acidic effluents. Only muscovite might partially neutralize the acidity, but the dissolution of this mineral is too slow to compensate for acidity. The occurrence of jarosite in the <2 mm fraction indicates that extreme acid mine drainage occurs. The gossan and roasted pyrite ashes have high contents of trace elements. According to their concentration, As (46–1710 ppm), Pb (113–3455 ppm) and Hg (0–53) are some of the most important toxic trace elements in these wastes. In dumps mainly composed of volcanic tuffs most of the trace elements derive from the gossan mixed in the piles. Gossan is stable in an oxidizing environment, but acidic effluents (pH < 2) can dissolve Fe oxyhydroxides from them and release high amounts of trace elements to the stream water. This research contributes to estimating the production of acid mine drainage and the actual contamination risk of potentially toxic elements in soils and waters of this area, and could be the base for possible future mitigation actions in other areas affected by mining wastes.     

Lithological and geochemical record of mining-induced changes in sediments from Macquarie Harbour,southwest Tasmania,Australia

Macquarie Harbour in southwest Tasmania, Australia, has been affected severely by the establishment of mines in nearby Queenstown in the 1890s. As well as heavy metal-laden acid rock drainage from the Mount Lyell mine area, over 100 Mt of mine tailings and slag were discharged into the Queen and Ring Rivers, with an estimated 10 Mt of mine tailings building a delta of ca. 2.5 km² and ca. 10 Mt of fine tailings in the harbour beyond the delta. Coring of sediments throughout Macquarie Harbour indicated that mine tailings accreted most rapidly close to the King River delta source with a significant reduction in thickness of tailings and heavy metal contamination with increasing distance from the King River source. Close to the King River delta the mine tailings are readily discriminated from the background estuarine sediments on the basis of visual logging of the core (laminations, colour), sediment grain size, sediment magnetic susceptibility and elemental geochemistry, especially concentrations of the heavy metals Cu, Zn and Pb. The high heavy metal concentrations are demonstrated by the very high contamination factors (CF > 6) for Cu and Zn, with CF values mostly >50 for Cu for the mine-impacted sediments. Although the addition of mine waste into the King River catchment has ceased, the catchment continues to be a source of these heavy metals due to acid rock drainage and remobilisation of mine waste in storage in the river banks, river bed and delta. The addition of heavy metals to the harbour sourced from the Mount Lyell mines preceded the advent of direct tailings disposal into the Queen River in 1915 with the metals probably provided by acid rock drainage from the Mount Lyell mining area.     

Selective chemical extraction of heavy metals in tailings and soils contaminated by mining activity: Environmental implications

Total concentrations of chemical elements in soils may not be enough to understand the mobility and bioavailability of the elements. It is important to characterise the degree of association of chemical elements in different physical and chemical phases of soil. Another geochemical characterisation methodology is to apply sequential selective chemical extraction techniques. A seven-step sequential extraction procedure was used to investigate the mobility and retention behaviour of Al, Fe, Mn, Cu, Zn, Pb, Cr, Co, Ni, Mo, Cd, Bi, Sn, W, Ag, As and U in specific physical–chemical and mineral phases in mine tailings and soils in the surroundings of the abandoned Ervedosa mine. The soil geochemical data show anomalies associated with mineralised veins or influenced by mining. Beyond the tailings, the highest recorded concentrations for most elements are in soils situated in mineralised areas or under the influence of tailings. The application of principal components analysis allowed recognition of (a) element associations according to their geochemical behaviour and (b) distinction between samples representing local geochemical background and samples representing contamination. Some metal cations (Mn, Cd, Cu, Zn, Co, Cr, Ni) showed important enrichment in the most mobilisable and bioavailable (i.e., water-soluble and exchangeable) fractions due likely to the acidic conditions in the area. In contrast, oxy-anions such as Mo and As showed lower mobility because of adsorption to Fe oxy-hydroxides. The residual fraction comprised largest proportions of Sn and Al and to a lesser extent Zn, Pb, Ni, Cr, Bi, W, and Ag, which are also present at low concentrations in the bioavailable fractions. The elements in secondary mineral phases (mainly Fe, Mn, Cu, Zn, Cd, Pb, W, Bi, Mo, Cr, Ni, Co, As and U) as well as in organic matter and sulphides are temporarily withheld, suggesting that they may be released to the environment by changes in physico-chemical conditions.     

Release of toxic elements from rocks and mine wastes at the Furtei gold mine (Sardinia, Italy)

The Furtei gold mine in Sardinia (Italy) exploits a volcanic-hosted high-sulphidation epithermal deposit. Large amounts of materials derived from exploitation are present in open pits, waste rock dumps and cyanidation tailings impoundment. Mineralized rocks in outcrops and waste dumps contain significant amounts of sulphides (mainly pyrite and enargite). These materials have a high potential for acid drainage generation and release of toxic elements (notably Cu and As, but also Al, Ni, Co and Cd) as pointed out by laboratory leaching tests and in agreement with chemical composition of waters draining the mining area, that show pH as low as 2, up to 180 mg/L Cu, up to 5 mg/L As, and up to 788 mg/L Al. On the other hand, leaching solutions and waters interacting with mineral assemblages of the propylitic alteration zone (mainly composed of chlorite, quartz, and calcite, with relic magmatic plagioclase) show higher pH, and lower metal loads. Leachates from cyanidation tailings show variable pH (between 6.2 and 9.7, depending on sulphide content in tailings); cyanide concentration varies between 110 µg/L and about 3 mg/L, whereas contents of toxic elements in leachates are, with the exception of Hg, within the limits of Italian regulations for non-dangerous industrial wastes. Reclamation plans provide for confinement of tailings within specific repositories. This measure should effectively reduce the environmental impact of these materials. Reclamation plans should also include an adequate management of other high-sulphide wastes.     

湘中桃江锰矿废矿堆环境地球化学分析

对湘中桃江锰矿废矿堆的废石进行了主量元素、稀土元素、微量元素和重金属元素的地球化学分析。野外观察及分析结果表明:组成废矿堆的岩石主要是赋矿围岩中奥陶统黑色页岩和原生碳酸锰矿石。这些废石富含Cu、Pb、Zn、Cr、Tl、Sb、U等重金属元素。废石暴露地表而遭受风化分解,导致Sc、V、Cr、U、Cd、Th等重金属元素淋滤释出,在废石样品中均表现出不同程度的迁移特征,且以V、Cd、U的迁移性最为强烈。此外,黑色页岩中Ni、Cu、Zn、Pb、Tl、Sb也明显发生淋失。这些重金属元素如Cd、Tl等毒性极强,进入矿区周围不断积聚,便可能对环境造成严重的影响。故对区内分布的废矿堆作为重金属污染源应高度重视。     

Chemical and mineralogical forms of lead,zinc and cadmium in particle size fractions of some wastes,sediments and soils in Korea

Forms of Pb, Zn and Cd in the different size fractions (<2 μm, 2–53 μm and >53 μm) of waste dumps, stream sediments and surrounding soils from a former Au mine in Korea, were investigated chemically by sequential extraction analysis and mineralogically by XRD and analytical SEM, so as to clarify the relationships between chemical and mineralogical forms. Total concentrations for the waste dumps and the stream sediments range from 655 to 2920 mg/kg for Pb, 565 to 1191 mg/kg for Zn, and 24.4 to 71.4 mg/kg for Cd, while those for the surrounding soils do not exceed the natural background levels. Direct observations on the heavy mineral fractions of the waste dumps and the stream sediments indicates that the primary sphalerite is still the main pool of the Zn and Cd, while a large part of the primary galena has been changed into a carbonate-bound form. This is in a good agreement with the partitioning of chemical forms in the coarse fractions, in which most of the Zn (75.3 to 79.4% for the waste dumps) and Cd (54.8 to 60.1% for the waste dumps) are associated with the oxidizable form, while most of the Pb (68.8 to 71.0% for the waste dumps) is in the acid (NaOAc)-extractable form. On the other hand, the partitioning of metal forms in the clay fraction is characterised by the highest proportion of the reducible form for all metals (56.6 to 73.8% for Pb, 60.2 to 68.4% for Zn, and 27.1 to 36.8% for Cd in the waste dumps), suggesting precipitation of easily to moderately reducible oxides and hydroxides from the other forms during weathering. With the increase of pH, the dramatic changes of the acid-extractable Pb, the oxidizable Zn and Cd in the coarse fractions, and the exchangeable form, especially for Cd in the clay fraction indicate that pH is the prime factor controlling the partitioning of heavy metals.     

Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

Impact of historical metalworks on the concentrations of major and trace elements in sediments: a case study in Finland

The concentrations of major and trace elements were determined (aqua regia leach and ICP-AES analyses) in stream, lake and dredged sediments downstream of the historical Antskog iron- and copperworks, S.Finland. The levels of Ag, Cd, Cu, Pb and Zn are highly elevated in all studied sediment types: roughly half of the studied lake-sediment samples contain >5 ppm Ag, >15 ppm Cd, >0.1% Cu, >0.1% Pb and >0.3% Zn. In the dredged sediment material located onshore, the concentrations of Ag, Cu and Pb are comparable to those in the polluted lake-sediment samples, while in stream sediments elevated metal concentrations are found especially in samples characterised by high concentrations of organic material. The source of the elevated metal concentrations is the historical metalworks at Antskog, mainly the copperworks of the 19th century. Compared to the limit values for contaminated soils in Finland, the concentrations of Cu, Pb and Zn are on average elevated by factors >10 in the polluted horizons of lake sediments, >5 in the dredged sediment located onshore and >2 at the most heavily contaminated site in the stream. Since the surface waters in the area are used for agricultural purposes and for various leisure activities, it is necessary to make further detailed investigations into the extent of the metal pollution and to determine species, mobility and bioavailability of the metals.     

Mobilization and attenuation of metals downstream from a base-metal mining site in the Mátra Mountains, northeastern Hungary

Regional geochemical baseline values have been established for Hungary by the use of low-density stream-sediment surveys of flood-plain deposits of large drainage basins and of the fine fraction of stream sediments. The baseline values and anomaly thresholds thus produced helped to evaluate the importance of high toxic element concentrations found in soils in a valley downstream of a polymetallic vein-type base-metal mine. Erosion of the mine dumps and flotation dump, losses of metals during filtering, storage and transportation, human neglects, and operational breakdowns, have all contributed to the contamination of a small catchment basin in a procession of releases of solid waste. The sulfide-rich waste material weathers to a yellow color; this layer of `yellow sand' blankets a narrow strip of the floodplain of Toka Creek in the valley near the town of Gyöngyösoroszi. Contamination was spread out in the valley by floods. Metals present in the yellow sand include Pb, As, Cd, Cu, Zn, and Sb. Exposure of the local population to these metals may occur through inhalation of airborne particulates or by ingestion of these metals that are taken up by crops grown in the valley. To evaluate the areal extent and depth of the contamination, active stream sediment, flood-plain deposits, lake or reservoir sediments, soils, and surface water were sampled along the erosion pathways downstream of the mine and dumps. The flood-plain profile was sampled in detail to see the vertical distribution of elements and to relate the metal concentrations to the sedimentation and contamination histories of the flood plain. Downward migration of mobile Zn and Cd from the contaminated upper layers under supergene conditions is observed, while vertical migration of Pb, As, Hg and Sb appears to be insignificant. Soil profiles of ¹³⁷Cs which originated from above-ground atomic bomb tests and the Chernobyl accident, provide good evidence that the upper 30–40 cm of the flood-plain sections, which includes the yellow sand contamination, were deposited in the last 30–40 years.     

Factors controlling heavy-metal dispersion in mining areas: the case of Vigonzano (northern Italy), a Fe-Cu sulfide deposit associated with ophiolitic rocks

Heavy-metal dispersion around the Vigonzano copper mine has been investigated by the analysis of waste dump material, surface soils, stream sediments and stream waters. Factors controlling their distribution have been investigated by means of mineralogical analyses, grain-size separation, and sequential extractions. Sheet silicates (chlorite and talc) and quartz dominate the mineralogy of the waste dump which is characterized by goethite, a product of sulfide weathering. Smectite, chlorite and talc are abundant in the <2 µm fraction. Chromium, Ni, Co and Cu have high enrichment levels within the waste area, but with the exception of Cu, are related to the occurrence of barren ultramafic rocks. Cu and, to a lesser extent, also Zn derive from ore minerals and are associated with their weathering products. Acid drainage has been observed but it is restricted to the waste area. Dissolved metal concentrations are locally high (e.g. 63 mg/l for Cu) in surface runoff from the waste area, but do not severely affect the surroundings because of precipitation of amorphous Cu-Al sulfate, related to an alkaline geochemical barrier. The limited impact of the mine is also due to the geological setting of this type of mineralization (Cyprus type), characterized by the association of the ore with mafic and ultramafic rock because the latter are characterized by alkaline drainage.     

Competitive adsorption of trace elements in calcareous soils as affected by sewage sludge,poultry manure,and municipal waste compost

The competitive adsorption of trace elements is a key issue in assessing the mobility of trace elements in calcareous soils and can be affected by disposal of sewage sludge, municipal waste, and poultry manure. The effect of municipal sewage sludge, poultry manure, and municipal waste compost on the sorption of cadmium (Cd), copper (Cu), zinc (Zn), and nickel (Ni) in surface samples of three calcareous soils was studied. As the applied concentrations increased, Cu and Cd adsorption increased, while Zn and Ni adsorption decreased in all treatments. Based on the distribution coefficient (K _d) values and proportion of increase or decrease in metal adsorption, the selectivity sequence in control and amended soils found was Cu ≫ Cd ≫ Ni > Zn and Cu ≫ Cd ≫ Zn > Ni, respectively. In general, among control and amended soils, control soils showed the highest K _d for Cd, Cu, and Ni, while sludge, poultry manure, and composted waste-amended soils had lowest K _d for Cd, Cu, and Ni, respectively. In the case of Zn, composted waste-amended and control soils had highest and lowest K _d, respectively. The present experimental results indicated that the addition of organic amendments to these calcareous soils reduced the sorption of Cd, Cu, and Ni. Thus, the effects of preferential adsorption and organic matter should be considered in assessing the risk associated with applying sewage sludge, poultry manure, and composted material to calcareous soils.     

Mineralogical and geochemical constraints on environmental impacts from waste rock at Taojiang Mn-ore deposit,central Hunan,China

The mineralogy and geochemistry of the waste rocks distributed at Taojiang Mn-ore deposit, central Hunan province, China, were studied using X-ray powder diffraction (XRD), electron microprobe analysis (EMPA) fitted with energy dispersive spectrometer (EDS) and inductively coupled plasma mass spectrum (atomic emission spectra) ICP-MS (AES), with the aim of predicting the environmental impacts of weathering of the waste rocks. The mineralogical results from microscope observation and XRD and EMPA studies show that the waste rock is composed of black shale and minor Mn carbonates. The oxidation of sulfide minerals such as galena, pyrite and chalcopyrite is accompanied by decomposition of Mn carbonates and K-feldspar during exposure to atmospheric O₂. The geochemical characteristics of major, rare earth elements (REE) and trace elements of the waste rocks also show that the waste rock can be divided into black shale and Mn carbonate, and both of them are currently under chemical weathering. The major alkalies and alkaline elements (Ca, Mg, Na, K, Rb, Sr and Cs) and major elements (Fe, S and P) and heavy metals (Sc, V, Cr, Th, U, Sn, Co, Ni, Cu, Zn, Pb, Mo, Cd, Sb, an Tl) are being released during weathering. The mobility of alkalis and alkaline elements Ca, Mg, Na, K, Rb, Sr and Cs is controlled by decomposition of Mn carbonates. The dispersion of Cr, Sc and Th (U) might be related to weathering of K-feldspar, and the release of the heavy metals Co, Ni, Cu, Zn, Pb, Mo, Cd Sb and Tl is dominated by the breaking of sulfide minerals. The REE of the waste rocks and surrounding soils and the spidery distribution patterns of heavy metals in the waste rocks, the surrounding soils and the surface waters show that weathering of the waste rocks and bedrock might be the sources of heavy metal contamination for the surrounding soils and surface water system for the mining area. This is predicted by the mass-balance calculation by using Zr as an immobile element. Therefore, it is urgently necessary take measures to treat the waste rocks distributed throughout the area for the local environmental protection.     

Geochemical study of different-aged mining dump materials in the Freiberg mining district, Germany

Historical mining dumps are useful archives for the investigation of weathering processes. The objective of this study was to investigate the weathering behavior of waste-rock material derived from the 800-year-old silver ore mining in Freiberg, Germany. For identifying time-dependent weathering indices, dumped material of four dumps of different ages and corresponding rock was examined regarding the geochemical composition. The dumped material is characterized by high contents of heavy metal containing sulfidic ores, such as pyrite, arsenopyrite, sphalerite and galena. Acid mine drainage is produced by the oxidative weathering of the sulfide minerals and causes the increased dissolving of soluble metals with increasing age of dumps. As a result of these weathering processes, a clear depletion of chalcophile elements in the older dump material (800 years) compared to the youngest dump (100 years) was observed. In the soil horizons downstream the dumps, high quantities of heavy metals (e.g., up to 12,000 ppm As, 3,300 ppm Pb, 640 ppm Zn), mainly adsorbed on organic matter, were determined and indicate a time-dependent element transfer from the dumps into their surrounding soils.     

Mechanical characteristics of dip basement effects on dump stability in the Shengli open pit mine in Inner Mongolia,China

For waste dump slopes that form basements, landslides can be prevented by determining a stability evolving law of dynamic development. Keeping this issue in mind, the relationship between the mechanical structure and stability of waste dumps with basements is studied. Three key factors that influence waste dump stability are presented, and judgment criteria for self-locking and unlocking states of dump basements are provided. From the friction coefficient of waste dump basement stability analyses of the Shengli open pit mine, the results indicate that waste dump basements on the right side of fault F8 and on the left side of fault F61 are subjected to self-locking. However, between faults F61 and F8, the basement is subjected to unlocking. Regarding the residual thrusting of unlocking areas, structure and stability optimization schemes for waste dumps in the Shengli open pit mine are provided through a mechanics analysis. Reducing the slopes and basement angles of waste dumps can enhance their stability by increasing basement roughness levels.