Micro Computers Applied to Ground Water Monitoring and Testing

Micro computers have been demonstrated to be a most valuable, cost-effective means of long- and short-term data acquisition for ground water investigations and installations. A system can readily be assembled for the cost of labor saved in the field, or for the same cost as other conventional instruments, which perform only a fraction of the functions of the computer system
Documented in this article are systems which have been developed and used for simultaneous monitoring of several wells during aquifer tests, and systems installed for long-term monitoring of piezometric surface fluctuations. Both systems can be contained in a small suitcase or insulated cooler. Specific features of the systems include multiple channel capacity, one-month maintenance period, variable computer controlled reading intervals, magnetic tape data storage, data reduction and analysis capabilities while maintaining monitoring, graphic display of time and measurements, hard copy capability and barometric pressure change corrections.
Other applications are examined for the complete control of pumping tests, including pumping rate; in situ permeability tests; monitoring changes; and even strain. The pressure transducer system may also be applied for river gauging and current measurement.     

Delineation of regional arid karstic aquifers: an integrative data approach

This research integrates data procedures for the delineation of regional ground water flow systems in arid karstic basins with sparse hydrogeologic data using surface topography data, geologic mapping, permeability data, chloride concentrations of ground water and precipitation, and measured discharge data. This integrative data analysis framework can be applied to evaluate arid karstic aquifer systems globally. The accurate delineation of ground water recharge areas in developing aquifer systems with sparse hydrogeologic data is essential for their effective long-term development and management. We illustrate the use of this approach in the Cuatrociénegas Basin (CCB) of Mexico. Aquifers are characterized using geographic information systems for ground water catchment delineation, an analytical model for interbasin flow evaluation, a chloride balance approach for recharge estimation, and a water budget for mapping contributing catchments over a large region. The test study area includes the CCB of Coahuila, Mexico, a UNESCO World Biosphere Reserve containing more than 500 springs that support ground water-dependent ecosystems with more than 70 endemic organisms and irrigated agriculture. We define recharge areas that contribute local and regional ground water discharge to springs and the regional flow system. Results show that the regional aquifer system follows a topographic gradient that during past pluvial periods may have linked the Río Nazas and the Río Aguanaval of the Sierra Madre Occidental to the Río Grande via the CCB and other large, currently dry, upgradient lakes.     

Aquifer parameter estimation using an incremental area method

Theoretical well functions have been derived over the years to predict ground water level behaviour in aquifer systems under stress owing to groundwater extraction. The drawdown data collected during pump tests are typically analysed using graphical curve‐matching procedures to estimate aquifer parameters based on these well functions. Difficulty in aquifer characteristic identification and parameter estimation may arise when the field data do not perfectly match the drawdown curves obtained from the well functions. The present study provides a new method for the interpretation of aquifer pump tests which supplements the existing curve‐matching procedures in case ideal conditions do not exist; the proposed method provides a greater degree of flexibility in the data analysis for diagnostic tool purposes. The method, referred to as the Incremental Area Method (IAM) is based on integrating the logarithmic‐based drawdown curves within a discrete time and matching the results with a corresponding time integral of the Theis ( 1935 ) Well Function which governs ideal confined aquifers. The application of the proposed method to synthetically generated data and field data showed that IAM represents a viable method which yields information on potential non‐idealness of the aquifer and provides aquifer parameter estimates thus potentially overcoming drawdown data curve‐matching difficulties. Copyright © 2011 John Wiley & Sons, Ltd.     

High-resolution slug testing

The hydraulic conductivity (K) variation has important ramifications for ground water flow and the transport of contaminants in ground water. The delineation of the nature of that variation can be critical to complete characterization of a site and the planning of effective and efficient remedial measures. Site-specific features (such as high-conductivity zones) need to be quantified. Our alluvial field site in the Kansas River valley exhibits spatial variability, very high conductivities, and nonlinear behavior for slug tests in the sand and gravel aquifer. High-resolution, multilevel slug tests have been performed in a number of wells that are fully screened. A general nonlinear model based on the Navier-Stokes equation, nonlinear frictional loss, non-Darcian flow, acceleration effects, radius changes in the wellbore, and a Hvorslev model for the aquifer has been used to analyze the data, employing an automated processing system that runs within the Excel spreadsheet program. It is concluded that slug tests can provide the necessary data to identify the nature of both horizontal and vertical K variation in an aquifer and that improved delineation or higher resolution of K structure is possible with shorter test intervals. The gradation into zones of higher conductivity is sharper than seen previously, and the maximum conductivity observed is greater than previously measured. However, data from this project indicate that well development, the presence of fines, and the antecedent history of the well are important interrelated factors in regard to slug-test response and can prevent obtaining consistent results in some cases.     

A Computerized Ground Water Monitoring System

This article describes a computer automated, hydrologic analysis system designed to allow the collection of high quality, long-term pumping test data. The instrument solves two of the major problems encountered in the field during aquifer tests: insufficient data, particularly during the early part of a test when drawdown is rapid; and high labor costs associated with long-term monitoring.
To illustrate the system's application, results are presented from the test of a highly transmissive aquifer. The aquifer's drawdown response was rapid; thus the time-drawdown curve was essentially flat after the first two minutes of the test, and correspondingly rapid data acquisition was essential for a unique solution of the aquifer's three-dimensional hydraulic conductivities.     

Modeling the Usefulness of Spatial Correlation Analysis on Karst Systems

Cross-correlation analyses on field data collected in karst aquifer systems can be used to develop a conceptual understanding of the aquifer. This includes the use of many data sets from the same aquifer to develop an understanding of how properties vary spatially. We focus on a method for characterizing the distribution of recharge, which is becoming increasingly important in regions where urban development encroaches on these important sources of water. Spatially varying precipitation data and cross-correlation analysis provide a means of spatially characterizing recharge locations on a karst aquifer. Our work expands on the numerical experiments conducted by Padilla and Pulido-Bosch (1995) using the numerical ground water model MODFLOW to introduce spatially varying parameters. The numerical experiments include conduit-controlled, matrix-controlled, and mixed karst systems with more than one precipitation time series input. The results show that spatially varying parameters can be inferred based on the cross-correlation of precipitation data and spring discharge. Simulations were completed using aquifer parameters derived from studies of the Barton Springs segment of the Edwards Aquifer. The simulations indicate that spatial variability within an aquifer can be inferred using cross-correlation analysis. A field study using these methods is summarized for Barton Springs near Austin, Texas.     

Application Procedures for the Electromagnetic Borehole Flowmeter in Shallow Unconfined Aquifers

It is increasingly common for the electromagnetic borehole flowmeter (EBF) to he used to measure hydraulic conductivity (K) distributions in subsurface flow systems. Past applications involving the EBF have been made mostly in confined aquifers (Kabala 1994; Boman et al. 1997; Podgorney and Ritzi 1997; Ruud and Kabala 1997a, 1997b; Flach et al. 2000), and it has been common to set up a flow field around a test well using a small pump that is located near the top of the well screen (Mob, and Young 1993). In thin, unconfined aquifers that exhibit ground water tables near the ground surface and that undergo drawdown during pumping, such a configuration can be problematical because pumping and associated drawdown may effectively isolate the upper portion of the aquifer from the flowmeter. In these instances, a steady-state flow field in the vicinity of the test well may be created using injection rather than pumping, allowing for testing in the otherwise isolated upper portion of the aquifer located near the initial water table position. Using procedures developed by Molz and Young (1993), which were modified for an injection mode application, testing was conducted to determine whether or not the injection mode would provide useful information in a shallow, unconfined aquifer that required the collection of data near the initial water table position. Results indicated that the injection mode for the EBF was well suited for this objective.     

Hydrologic significance of carbon monoxide concentrations in ground water

Dissolved carbon monoxide (CO) is present in ground water produced from a variety of aquifer systems at concentrations ranging from 0.2 to 20 nanomoles per liter (0.0056 to 0.56 microg/L). In two shallow aquifers, one an unconsolidated coastal plain aquifer in Kings Bay, Georgia, and the other a fractured-bedrock aquifer in West Trenton, New Jersey, long-term monitoring showed that CO concentrations varied over time by as much as a factor of 10. Field and laboratory evidence suggests that the delivery of dissolved oxygen to the soil zone and underlying aquifers by periodic recharge events stimulates oxic metabolism and produces transiently high CO concentrations. In between recharge events, the aquifers become anoxic and more substrate limited, CO is consumed as a carbon source, and CO concentrations decrease. According to this model, CO concentrations provide a transient record of oxic metabolism affecting ground water systems after dissolved oxygen has been fully consumed. Because the delivery of oxygen affects the fate and transport of natural and anthropogenic contaminants in ground water, CO concentration changes may be useful for identifying predominantly anoxic ground water systems subject to periodic oxic or microaerophilic conditions.     

An Effective and Inexpensive Gas-Drive Ground Water Sampler

Ground water scientists engaged in assessment of contaminant occurrence and migration are faced with a number of practical problems. These problems include, but are not limited to, escalating drilling costs, labor costs for proper sampling of monitoring wells, collection of ground water samples that are representative of aquifer conditions and accurate delineation of hydrogeologic regimes and the areal and vertical distribution of ground water contaminants.
In response to these problems, a number of ground water sampling devices have been developed. One device is a gas-driven ground water sampler developed for multilevel installation. Use of these samplers have been shown to decrease project costs and allow easy collection of high quality samples. However, the currently available samplers are relatively expensive, some of them operate on a closed check valve system, which does not allow determination of piezometric heads in aquifers with fluctuating water tables and they are not adaptable to design changes in the field necessitated by site-specific hydrogeologic conditions.
GHR Engineering Associates Inc. has designed an effective gas-driven sampler, which accomplishes the same objectives as the commercially available models, but is on the average, one-tenth the cost of currently available samplers. It offers the advantages of being more cost-effective than commercially available models, has an open check valve system to allow measurements of water table fluctuation and is easily adaptable in the field to meet site-specific hydrogeologic conditions.     

Modeling axisymmetric flow and transport

Unmodified versions of common computer programs such as MODFLOW, MT3DMS, and SEAWAT that use Cartesian geometry can accurately simulate axially symmetric ground water flow and solute transport. Axisymmetric flow and transport are simulated by adjusting several input parameters to account for the increase in flow area with radial distance from the injection or extraction well. Logarithmic weighting of interblock transmissivity, a standard option in MODFLOW, can be used for axisymmetric models to represent the linear change in hydraulic conductance within a single finite-difference cell. Results from three test problems (ground water extraction, an aquifer push-pull test, and upconing of saline water into an extraction well) show good agreement with analytical solutions or with results from other numerical models designed specifically to simulate the axisymmetric geometry. Axisymmetric models are not commonly used but can offer an efficient alternative to full three-dimensional models, provided the assumption of axial symmetry can be justified. For the upconing problem, the axisymmetric model was more than 1000 times faster than an equivalent three-dimensional model. Computational gains with the axisymmetric models may be useful for quickly determining appropriate levels of grid resolution for three-dimensional models and for estimating aquifer parameters from field tests.     

The Role of Bioattenuation in the Management of Aromatic Hydrocarbon Plumes in Aquifers

Ground water scientists have made significant advances in understanding the soil interactions, hydrogeology, fate and transport, and subsurface microbiology of aromatic hydrocarbons (BTEX) in aquifer systems. It is now generally recognized that a major factor responsible for the attenuation and mass reduction of BTEX in plumes is the widespread occurrence of hydrocarbon biodegradation by indigenous soil microorganisms in aquifer material. Most well-studied BTEX plumes that develop from the accidental release of gasoline fuels contain low levels of soluble hydrocarbons (< 1 to 5000 ppb) and have been shown to be spatially confined because of natural biotransformation mechanisms. These in situ processes are controlled by source and aquifer characteristics, permeability, sorption, and geochemical properties of the aquifer. Many laboratory subsoil-ground water microcosms and field studies (10 to 20 C) have demonstrated the rapid biodecay (1 to SO percent/day for microcosms and 0.5 to 1.5 percent/day for plumes) of these aromatic compounds under primarily aerobic conditions (i.e., those with sufficient dissolved oxygen). The ability to implement ground water bioremediation will depend upon our understanding of source control and aquifer recharge effects on the spatial distribution of plumes. In addition, estimating the biodegradation of sorbed BTEX, determining limits and potential for in situ biostimulation of soluble plumes, and establishing data requirements for predictive modeling of natural attenuation will be useful for this remediation technology. The use of these tools to manage ground water quality appears to represent the most practical alternative, particularly for low-risk ground water supplies.     

Estimation of recharge from floods in disconnected stream-aquifer systems

Stream-aquifer interaction has been the subject of much research for cases of good hydraulic connection (continuous saturated zone) between a river and an aquifer. Under these conditions, floods do not represent a very large net input to the aquifer because most of the water that enters the aquifer during the flood returns to the river when its stage recedes. The situation is different in disconnected stream-aquifer systems, where the streambed lies above the water level in the aquifer, thus preventing return flow from the aquifer. Under these conditions, floods may represent large, but hard to quantify, water inputs. Here, we present a methodology to estimate recharge from floods for disconnected stream-aquifer systems. Recharge is estimated as the product of a flood time function (dependent on the streamflow) and an unknown factor, which is obtained from calibrating a ground water flow model to aquifer heads. The approach can also benefit from concentration data, which can be very informative when river water concentrations vary over time. This methodology is applied to a field situation where recharge from river flooding is found to amount to nearly 15 million m(3)/year on the average, which represents 40% of the total aquifer inputs. Recharge from flooding helps explain major head recoveries, suggesting that basin water management programs should allow some floods to occur.     

Field Test of the In Situ Permeable Ground Water Flow Sensor

Two in situ permeable flow sensors, recently developed at Sandia National Laboratories, were field tested at the Brazos River Hydrologic Field Site near College Station, Texas. The flow sensors use a thermal perturbation technique to quantify the magnitude and direction of ground water flow in three dimensions. Two aquifer pumping tests lasting eight and 13 days were used to field test the flow sensors. Components of ground water flow as determined from piezometer gradient measurements were compared with ground water flow components derived from the 3-D flow sensors. The changes in velocity magnitude and direction of ground water flow induced by the pump were evaluated using flow sensor data and piezometric analyses. Flow sensor performance closely matched piezometric analysis results. Ground water flow direction (azimuth), as measured by the flow sensors and derived in the piezometric analysis, predicted the position of the pumping well accurately. Ground water flow velocities measured by the flow sensors compared well to velocities derived in the piezometric analysis. A significant delay in flow sensor response to relatively rapid changes in ground water flow was observed. Preliminary tests indicate that the in situ permeable flow sensor provides accurate and timely information on the velocity magnitude and direction of ground water flow.     

Screened Auger Sampling: The Technique and Two Case Studies

The screened auger is a laser-slotted, hollow-stem auger through which a representative sample of ground water is pumped from an aquifer and tested for water-quality parameters by appropriate field-screening methods. Screened auger sampling can be applied to ground water quality remedial investigations, providing:(1) a mechanism for determining a monitoring well's optimal screen placement in a contaminant plume; and (2) data to define the three-dimensional configuration of the contaminant plume.
Screened auger sampling has provided an efficient method for investigating hexavalent chromium and volatile organic compound contamination in two sandy aquifers in Cadillac, Michigan. The aquifers approach 200 feet in thickness and more than 1 square mile in area. A series of screened auger borings and monitoring wells was installed, and ground water was collected at 10-foot intervals as the boreholes were advanced to define the horizontal and vertical distribution of the contaminant plumes. The ability of the screened auger to obtain representative ground water samples was supported by the statistical comparison of field screening results and subsequent laboratory analysis of ground water from installed monitoring wells.     

Heat flow and ground water movement in the Bohemian cretaceous basin (Czechoslovakia)

Sub-surface temperature fields may be considerably affected by active ground water systems, thereby seriously hampering the interpretation of heat flow data. Quantitative evaluation of the convective component of heat transfer is thus very important in cases such as large sedimentary basins with vast underground water circulation. We propose in this study a simple model of horizontal aquifer. This model was used to examine the effect of the lateral convection on the surface heat flow near the recharge zone of basinal margins. The perturbation of the heat flow field above the aquifer was calculated for various aquifer geometry and various flow velocities and the regional scale dependence of the perturbation on the hydraulic properties of the aquifer was demonstrated. The model was applied to the Bohemian Cretaceous Basin and it was shown that within a few kilometres from the recharge zones the observed surface heat flow may be underestimated by up to several tens of percent. The procedure was tested in two locations in this area, in an attempt to make hydrogeological corrections to the measured heat flow values in several boreholes.     

A comparison of helicopter‐borne electromagnetic systems for hydrogeologic studies

The increased application of airborne electromagnetic surveys to hydrogeological studies is driving a demand for data that can consistently be inverted for accurate subsurface resistivity structure from the near surface to depths of several hundred metres. We present an evaluation of three commercial airborne electromagnetic systems over two test blocks in western Nebraska, USA. The selected test blocks are representative of shallow and deep alluvial aquifer systems with low groundwater salinity and an electrically conductive base of aquifer. The aquifer units show significant lithologic heterogeneity and include both modern and ancient river systems. We compared the various data sets to one another and inverted resistivity models to borehole lithology and to ground geophysical models. We find distinct differences among the airborne electromagnetic systems as regards the spatial resolution of models, the depth of investigation, and the ability to recover near‐surface resistivity variations. We further identify systematic biases in some data sets, which we attribute to incomplete or inexact calibration or compensation procedures.     

Effects of water use on arsenic release to well water in a confined aquifer

Field-based experiments were designed to investigate the release of naturally occurring, low to moderate (< 50 microg/L) arsenic concentrations to well water in a confined sandstone aquifer in northeastern Wisconsin. Geologic, geochemical, and hydrogeologic data collected from a 115 m2 site demonstrate that arsenic concentrations in ground water are heterogeneous at the scale of the field site, and that the distribution of arsenic in ground water correlates to solid-phase arsenic in aquifer materials. Arsenic concentrations in a test well varied from 1.8 to 22 microg/L during experiments conducted under no, low, and high pumping rates. The quality of ground water consumed from wells under typical domestic water use patterns differs from that of ground water in the aquifer because of reactions that occur within the well. Redox conditions in the well can change rapidly in response to ground water withdrawals. The well borehole is an environment conducive to microbiological growth, and biogeochemical reactions also affect borehole chemistry. While oxidation of sulfide minerals appears to release arsenic to ground water in zones within the aquifer, reduction of arsenic-bearing iron (hydr)oxides is a likely mechanism of arsenic release to water having a long residence time in the well borehole.     

A modular injection system, multilevel sampler, and manifold for tracer tests

Ground water injection and sampling systems were developed for bacterial transport experiments in both homogenous and heterogeneous unconsolidated, surficial aquifers. Two types of injection systems, a large single tank and a dynamic mixing tank, were designed to deliver more than 800 L of amended ground water to the aquifer over 12 hours, without altering the ground water temperature, pH, Eh, or dissolved gas composition. Two types of multilevel samplers (MLSs) were designed and installed. Permanent MLSs performed well for the homogenous surficial aquifer, but their installation procedure promoted vertical mixing, which could obfuscate experimental data obtained from vertically stratified, heterogeneous aquifers. A novel, removable MLS was designed to fit in 2- and 4-inch wells. Expandable O-rings between each sampling port hydraulically isolated each port for sample collection when a nut was tightened at the land surface. A low-cost vacuum manifold system designed to work with both MLS designs used 50 mL centrifuge tubes to efficiently sample 12 MLS ports with one peristaltic pump head. The integrated system was developed and used during four field campaigns over a period of three years. During each campaign, more than 3000 ground water samples were collected in less than one week. This system should prove particularly useful for ground water tracer, injection, and push-pull experiments that require high-frequency and/or high-density sampling.     

Transboundary flow modeling: the Zohor depression of Austria and the Slovak Republic

Estimation of available ground water is a basic aspect of ground water management. Mathematical modeling is one of the methods that can be effectively used to obtain such estimates. A numerical model was used to calculate available ground water in the Zohor depression-an aquifer transcending national boundaries between the Slovak Republic and Austria. The aquifer, formed by Quaternary sediments overlying Neogene sequences, is composed of various clays interbedded with layers of sand, gravel, sandstones, and conglomerates. The AQUA computer model package was used to simulate flow in the aquifer. For model compilation, the following data were used: (1) effective precipitation; (2) surface water levels in surface water gauging profiles; and (3) withdrawal amounts. Hydraulic parameters of the aquifer were estimated based on information from 86 wells located in the area. The model was verified using data on ground water levels from a monitoring network. The simulation of the aquifer system permitted the estimation of the available ground water in the study area, showing that an additional 587 L/s can be abstracted. Ground water inflows to the Morava River, which flows through the region, range from 745 to 3100 L/s.     

Validating the KAGIS black‐box GIS‐based model in a Mediterranean karst aquifer: Case of study of Mela aquifer (SE Spain)

Karst Aquifer GIS‐based model (KAGIS model) is developed and applied to Mela aquifer, a small karst aquifer located in a Mediterranean region (SE Spain). This model considers different variables, such as precipitation, land use, surface slope and lithology, and their geographical heterogeneity to calculate both, the run‐off coefficients and the fraction of precipitation which contributes to fill the soil water reservoir existing above the aquifer. Evapotranspiration uptakes deplete water, exclusively, from this soil water reservoir and aquifer recharge occurs when water in the soil reservoir exceeds the soil field capacity. The proposed model also obtains variations of the effective porosity in a vertical profile, an intrinsic consequence of the karstification processes. A new proposal from the Nash–Sutcliffe efficiency index, adapted to arid environments, is presented and employed to evaluate the model's ability to predict the water table oscillations. The uncertainty in the model parameters is determined by the Generalized Likelihood Uncertainty Estimation method. Afterwards, when KAGIS is calibrated, wavelet analysis is applied to the resulting data in order to evaluate the variability in the aquifer behaviour. Wavelet analysis reveals that the rapid hydrogeological response, typical of a wide variety of karst systems, is the prevailing feature of Mela aquifer. This study proves that KAGIS is a useful tool to quantify recharge and discharge rates of karst aquifers and can be effectively applied to develop a proper management of water resources in Mediterranean areas.