A rural “eye” in the Capital: Tuti Island,Khartoum, Sudan

Islands at strategic points have often become the core of a modern city, or have been developed as historic heritage sites. This has been especially true when the settlers have been strangers in the land. This paper examines why such a situation has not occurred with Tuti Island at the confluence of the White and Blue Niles in the centre of Sudan's Three Towns capital, even though the first permanent inhabitants at the confluence were strangers and chose Tuti Island for their first settlement. The paper questions whether Tuti can survive as a green eye in its present form with the increasing pressures from the urban areas surrounding it.     

On the value of dolines in gypsum terrains as a “Geological Heritage”: an example from Sivas basin, Turkey

Karst topography is a landscape shaped by the dissolution of a layer or layers of soluble bedrock, usually limestone and evaporites. Karstification in the Sivas basin (Turkey) has sculpted a beautiful landscape with a distinctive beauty and appeal for both local inhabitants and visitors. Dolines are very special geological landscape features found in karst regions, and the Sivas basin has several giant dolines amongst its thousands of smaller dolines. The basin constitutes a distinctive karst architecture with a system of collapse and/or dolines and caves. Anyone who walks along the shores of a lake resulting from the collapse, in this gypsum terrain, will be amazed with the lake and rocks that surround them. In this paper, dolines in the gypsum terrain are evaluated and discussed according to their value as a “Geological Heritage”. Three main characteristics of dolines, namely their scientific, aesthetic and ecosystem importance are considered and discussed. Dolines and karstified areas as representative examples of landform types possess the three attributes for them to be considered as a Geological Heritage in that they demonstrate the effect of erosion on the landform, geomorphic processes that are still active and a range of features characteristic of the rock unit involved.     

On the role of sphericity of falling rock clusters—insights from experimental and numerical investigations

In this study, the dynamic behavior of rock clusters falling on rough slopes and impacting a vertical barrier is investigated experimentally and numerically using discrete element analysis. A specially designed laboratory setup that involves a flume of adjustable slope lined with a bumpy surface and equipped with an instrumented wall at the toe is used in the experimental investigation. The velocity profiles and impact forces were measured for three inclination angles using two different rock clusters. Three-dimensional discrete element analysis is then conducted to investigate the mechanical behavior of the rockfall and examine the role of sphericity of the rock cluster on the overall behavior of the system. This was achieved by explicitly simulating the complex shapes of the used rocks and the rough surface of the slope. The material coefficient of friction was measured using heap tests, and the results are compared with those obtained numerically using four different particle sphericities. Conclusions are made regarding the effect of slope inclination angle and the volume of the cluster on the impact forces exerted on rigid barriers. This study suggests that rock sphericity plays important roles on the dynamic behavior of the system and should be taken into consideration in simulating rockfall problems.     

On the problem of variability in the chemical composition of mud–volcanic waters: Evidence from the Yuzhno-Sakhalinsk mud volcano

The results of hydrogeochemical observations on the Yuzhno-Sakhalinsk mud volcano in 2010–2014 are considered. The chemical analysis of samples of mud–volcanic waters was carried out at various analytical centers, which is similar to the common situation where hydrochemical data for a volcano are obtained by different researchers. It is shown that the chemical composition of the mud–volcanic waters is relatively stable in time and space (for different gryphons of the volcano). This allows us to determine the characteristic range of hydrogeochemical indicators. For each year of observations, the coefficients of variation for the concentrations of Na, Mg, Ca, K, and HCO₃ mostly range from 10 to 30%. However, the concentrations analyzed in individual samples may differ significantly from each other. These natural variations are a likely source of errors in the interpretation of hydrochemical data. In addition, it is necessary to account for the specifics of mud–volcanic waters as an object of analytical chemical investigations.     

Quantifying the role of sandy–silty sediments in generating slope failures during earthquakes: example from the Algerian margin

The Algerian margin is a seismically active region, where during the last century, several large magnitude earthquakes took place. This study combines geotechnical and sedimentological data with numerical modelling to quantitatively assess the present-day slope stability of the Algerian margin. Geotechnical laboratory tests, such as cyclic triaxial tests, oedometric tests and vane shear tests were carried out on sediment cores collected on the study area. The liquefaction potential of a sediment column located about 30 km from the Boumerdès earthquake epicentre of 21st May 2003 was evaluated theoretically for an earthquake of M _w  = 6.8. We show that thin sand and silt beds such as those described on recovered sediment cores are the main cause of sediment deformation and liquefaction during earthquakes. Numerical calculations showed that the slope failure may occur during an earthquake characterised by a PGA in excess of 0.1g, and also that, under a PGA of 0.2g liquefaction could be triggered in shallow silty–sandy deposits. Moreover, comparison of the predicted slope failure with failure geometries inferred from seafloor morphology showed that earthquakes and subsequent mass movements could explain the present-day morphology of the study area.     

Early subduction–exhumation and late channel flow of the Greater Himalayan Sequence: implications from the Yadong section in the eastern Himalaya

Based on metamorphic studies of the Yadong high-pressure (HP) granulite and multiple thermochronological investigations of granitoids from both upper and lower parts, the Yadong section in the eastern Himalaya constrains the Cenozoic tectonic evolution of the Greater Himalayan Sequence (GHS). The Yadong HP granulite, located at the top of the GHS, underwent a peak-stage HP granulite facies metamorphism and two stages of retrograde metamorphism. Granulite and hornblende facies retrograde metamorphism took place at 48.5 and 31.8 Ma, respectively, marking the time of exhumation of the subducted Indian slab to lower and middle crustal levels. Subsequently, an average young zircon U–Pb age obtained from the Yadong HP granulite indicated that this unit was captured by its surroundings in a partially molten condition at 16.9 Ma. In addition, three granitoids from both the lower and the upper parts of the GHS yielded biotite ⁴⁰Ar/³⁹Ar ages of 11.0, 11.3, and 11.5 million years. These consistent ages suggest that the GHS along the Yadong section was laterally extruded and synchronously cooled to ～300°C at ～11.3 Ma. Furthermore, the granitic gneisses yield apatite fission track ages of ～7 million years, documenting the cooling of the GHS to ～110°C. A two-stage model describes the Cenozoic tectonic evolution of the GHS: (1) the Indian slab had subducted under Tibet before ～55 Ma, and was exhumed to the lower crust (50-40 km) at 48.5 Ma, and to the middle crust (22-15 km) at 31.8 Ma; and (2) the partial melting occurred at middle crustal levels during the period 31.8 to 16.9 Ma, causing channel flow. In the late stage, the GHS was laterally extruded by ductile mid-crustal flow during the period 16.9 to ～7 Ma, characterized by a fast cooling rate of ～2 mm per year.     

Coping strategies in rural areas of the Buzau Sub–Carpathians

This paper focuses on the Sub–Carpathian region which has traditionally maintained a large rural population and is today suffering acute economic and social stress. During the present transition phase the rural population is struggling to survive by combining elements of the modern and traditional economies and research has been undertaken to clarify a range of household strategies. After profiling the communes of the Buzau Carpathians the problem is tackled at two levels on the basis of questionnaire work carried out during 1998–1999. First there is a general overview to outline conditions in Patarlagele commune, including some local contrasts between settlements on main transport axis along the Buzau valley and those in the hills and side valleys. Second there is a consideration of in-depth profiles of specific households in villages in the wider area including Panatau as well as Patarlagele commune. It remains to be seen to what extent the district will be able to safeguard its social capital when growth resumes in large towns especially Brasov and Buzau with which Patarlagele has the best contacts. It is also an open question how far the remoter settlements will retain a viable population, assuming that the services remain relatively poor while disadvantage persists with regard to both employment opportunities and physical security. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Thermal Structure of the Upper Mantle in Eastern China——Inferred from the Petrological Model

Cenozoic basalt in eastern China contains abundant ultramafic xenoliths which are specimens of pyrolitesreleased during basaltic magma eruption. A total of 405 P-T data of pyroxene in the ultramafic rocks have beencollected, which present a more precise pyroxene geotherm. The average geothermal gradient in the upper man-tle represented by the pyroxene geotherm is about 3.3℃ / km, which is much less than that derived from theconductive thermal model (≈14℃ / km), implying the great significance of convective heat transfer. The calcu-lation shows that the contributions of convective and conductive heat transfers are 79% and 21%, respectively.The perturbation in the thermal structure of the upper mantle is an important manifestation of thetectonothermal event of Cenozoic continental rifting and intense basaltic volcanism in eastern China. Based onthe pyroxene geotherm and its comparison with the current geothermal field derived from the measurements ofthe surface heat flows, it is suggested that the Moho may be a secondary thermal boundary. The currentgeothermal field and the thermal structure of the lithosphere in eastern China may mainly reflect the result ofthe tectonothermal disturbance in the Neogene-Quaternary, in other words, the lithosphere has just begun toCool.     

On the Carboniferous Sequence Stratigraphy in the Tazhong Area, Xinjiang——A Model of the Sequence Stratigraphy Framework of Intracratonic Depressional Basins

The Carboniferous prototype sedimentary basin in the Tazhong (Central Tarimbasin) area is recognized as a compressive intracratonic depressional one. Three type Ⅰ sequenceboundaries and three type Ⅱ sequence boundaries can be identified in the CarboniferousSystem, which can accordingly be divided into five sedimentary sequences. These sequencespossess stratigraphic characters of the standard sequence and correspond to the depositionalstratigraphic unit of a third-order eustatic cycle. They can be regionally or globally correlatedwith each other. The framework of sequence stratigraphy of the intracratonict basin in thestudy area distinctly differs from that of the passive continental-margin basin in the lack ofdepositional systems of early-middle lowstand, poor development of the deeply incised valleyand condensed section of the maximum sea-flood, good development of type Ⅱ sequenceboundaries and coastal plain depositional systems coexisting with shelf-type fan deltas underwet climatic conditions, Which consequently led to the formation of a paralic lithofacies frame-work.     

Origin of magmatic sulfides in a Proterozoic island arc—an example from the Portneuf–Mauricie Domain,Grenville Province,Canada

The Portneuf–Mauricie Domain (PMD), located in the south-central part of the Grenville province, contains Mesoproterozoic Ni–Cu ± platinum-group element (PGE) prospects hosted in a variety of plutonic intrusions (layered, with simple structures, or zoned) and emplaced in a mature island arc setting. A two-stage model is envisaged to explain the formation of magmatic sulfides. An early loss of a small amount of sulfides in the conduits of primitive, hydrous mantle-derived melts under high fO₂, resulted in depletion of the magmas in chalcophile and precious metals (Cu/Pd ratios vary from initial mantle values up to 1.6 × 10⁶). Then, nearer the mineralized zones, the magmas interacted with sulfide-bearing country rocks, resulting in felsification of the magmas, assimilation of crustal sulfur (δ ³⁴S values up to +5.5‰), and the formation of an immiscible sulfide liquid. Liquid-sulfide formation was followed by variable interactions between the silicate and sulfide magmas, which were responsible for the enrichment of sulfides in Ni, Cu, and, locally, PGE. Indeed, low R factors are found for prospects hosted in intrusions with a simple internal structure and in layered intrusions whereas high R factors are found for prospects hosted in zoned intrusions. Finally, sulfide melt may have been partly incorporated into later pulses of magma and injected into shallow magma chambers to form the PMD prospects. The PMD prospects share common characteristics with other well-known deposits (Aguablanca, Vammala, Stormyrplunen, and deposits in Alaskan/Ural-type intrusions), attesting to the Ni, Cu, and PGE potential of deposits associated with subduction-zone settings.     

Geoheritage in New South Wales — a reassessment of sites from the register of the national estate

The geology of New South Wales is diverse, spanning Paleoproterozoic to modern materials and their various associated landforms and soils. In recognition of the intrinsic geological value of the State, around 150 geological sites were nominated to the now defunct Register of the National Estate, with the objective of geoconservation. However, these sites did not encompass the full range of geology of New South Wales; neither did they offer registered sites any protection. Analysis shows that the types of sites nominated were biased towards sedimentary and igneous rocks, and fossils, with under representation of metamorphic rocks, site-restricted soils, geomorphology and hydrogeology. To test the utility of the Brocx and Semeniuk ‘Geoheritage Toolkit’, a subset of the Register listings was re-examined, focusing on the Sydney Basin. Within the Sydney Basin, 59 nominated sites were reassessed using various geoheritage categories and the hierarchical framework of scale of the Toolkit. Four sites within the Sydney Basin were found to have features of international to national significance, and to have national historical value. These sites will need to be renominated for State and National listing. Clearly, to ensure that University teaching sites, as well as stratigraphic and lithologic type sections and reference sites, reflecting the geodiversity of New South Wales are conserved for future generations, a greater number of sites need to be put forward for heritage listing.     

On the local multiscale determination of the Earth’s disturbing potential from discrete deflections of the vertical

As a first approximation, the Earth is a sphere; as a second approximation, it may be considered an ellipsoid of revolution. The deviations of the actual Earth’s gravity field from the ellipsoidal “normal” field are so small that they can be understood to be linear. The splitting of the Earth’s gravity field into a “normal” and a remaining small “disturbing” field considerably simplifies the problem of its determination. Under the assumption of an ellipsoidal Earth model, high observational accuracy is achievable only if the deviation (deflection of the vertical) of the physical plumb line, to which measurements refer, from the ellipsoidal normal is not ignored. Hence, the determination of the disturbing potential from known deflections of the vertical is a central problem of physical geodesy. In this paper, we propose a new, well-promising method for modelling the disturbing potential locally from the deflections of the vertical. Essential tools are integral formulae on the sphere based on Green’s function with respect to the Beltrami operator. The determination of the disturbing potential from deflections of the vertical is formulated as a multiscale procedure involving scale-dependent regularized versions of the surface gradient of the Green function. The modelling process is based on a multiscale framework by use of locally supported surface curl-free vector wavelets.      

Charactristics of the Biomarkers from Nonmarine Crude Oils in China—A Review

The present paper deals with the biomarker characteristics of crude oils and source rocks from different environments(fresh,fresh-brackish and salt waters)of nonmarine depositional basins of different ages in China.Their characters are summarized as follows:1)Souce rocks and crude oils derived from fresh-water lacustrine facies have an odd/even predominance of n-alkanes and high pristine/phytane ratios.Oils from the fresh-water lacustrine facies differ from typical marine oils in the relative contents of total steranes and terpanes,the concentrations of hopanes and organic sul-phur compounds and the values of methylphenanthrene indices and C,H,S stable isotopes.2)The source rocks and crude oils derived from saline lacustrine facies possess an even/odd predominance of n-alkanes and high phytane/pristine ratios.There are also some differences between saline lacustrine oils and freshwater lacustrine oils in the concentrations of steranes,tricyclic terpanes and organic sulphur compounds,as well as in the values of methylphenanthrene indices and C,H,S stable isotopes.3)Oils derived from fresh-brackish water lake facies differ from oils from fresh-water lacustrine or samline lacustrine environments in respect of some biomarkers.According to the various distributions of these biomarkers,a number of geochemical parameters can be applied synthetically to differentiating and identifying the nature of original depositional environments of crude oils and source rocks and that of organisms-primary source materials present in those environments.     

Water losses from a reservoir built in karst: the example of the Boljunčica reservoir (Istria,Croatia)

The paper presents the case of the Boljunčica reservoir, which began operation in 1973. It is situated on the Istria peninsula (Croatia). This is a multipurpose reservoir which was built in order to protect the downstream area from flood, to store water for irrigation, and to control sediment transport. The reservoir is situated on the contact zone between water impermeable Eocene flysch and deep Eocene and Cretaceous limestone. The bottom of the reservoir is covered partly by both flysch and quaternary deposits. Water losses from the reservoir bottom are so large that the main service intended for the reservoir, the storage of water for irrigation, is impossible. After every intensive precipitation, which occurs often in this region, the reservoir fills very quickly. The problem is that its retention of water is very short, and lasts only a few days. The water volume of the reservoir at the spillway altitude of 93.00 m a. s. l. is about 6.5 × 10⁶ m³. Because of water losses from the reservoir bottom, the mean annual volume of water stored in it, during the period of 1977–2005 was only 0.5 × 10⁶ m³, which is less than 8% of the full reservoir volume. On the reservoir bottom, many new swallow holes opened through the sediment cover after each time it filled and emptied with water. Special attention is paid to the groundwater level analyses. Interdisciplinary analyses and investigations of hydrological and hydrogeological factors causing the formation of swallow holes and water losses from the Boljunčica reservoir are discussed. The example given in this paper explains one unsuccessful case of building a reservoir in Dinaric karst, caused mainly due to insufficient geological, hydrogeological and hydrological investigations. In order to prevent water losses from the Boljunčica reservoir, very complex and expensive work needs to be done, but its success regarding the reasonable reduction of water losses from the reservoir is in question.     

On the Origin of Migmatites in Yunlu, Western Guangdong

Partially migmatized rocks, banded migmatites, augen-banded migmatites and gneissic migmatites are developed successively from Xindong to Yunlu, Gaozhou, Guangdong Province in the Yunkai Caledonian orogenic belt at the border between Guangdong and Guangxi. Mass-balance calculations, statistical analysis of the textural relations and mineralogical and geochemical studies of the migmatites and the study of the metamorphlc setting of the Yunlu area indicate that the migmatites in the study area were primarily formed by anatexis without remarkable introduction of foreign components such as K, Na and Si and removal of Ca, Fe, Mg, etc.     

On the meaning of the terms “glaciation” and “interglacial” in the framework of studying paleoclimatic records from the Pleistocene continental and deep-water deposits

The terms “glaciation” and “interglacial” are considered from the point of view of palaeoclimatic proxies obtained from the Pleistocene deep-water and continental deposits. It is shown that the crucial factor in substantiation of these notions is determination of the cause-and-effect mechanism in the considered climatic oscillations. It is noted that oxygen isotope data on deep-water deposits have an undoubted advantage because a more accurate quantitative estimate of climatic oscillation parameters can be made on their basis. It is concluded that the role played by quantitative estimates of palaeoclimatic changes, represented by, first of all, amplitude and time characteristics of climatic oscillations, will become more significant as the methods of paleogeographic studies of both continental and deep-water deposits of the Pleistocene improve; in contrast, the formal determination of the rank of palaeoclimatic oscillations will become less significant. Special attention is paid to the cases of misfits between the Pleistocene deep-water and continental paleoclimatic records and to the necessity to make them consistently as good as possible, especially in the case of Early Pleistocene deposits.