Leaky Aquifer Models to Simulate the Well Flow in Fractured Aquifers with Linear Interporosity Flow

Following Hemker and Maas (1987) the models of two or three leaky aquifers are applied to simulate the flow to vertical wells operating in the fractured or dual porosity aquifers. The software WellTest (WT) (Székely 2015) is used for calculating the drawdown and discharge rate variation. The comparative analysis with the independent analytical solutions by Boulton and Streltsova-Adams (1978), Warren and Root (1963), Kazemi et al. (1969) concluded with acceptable agreement between the WT simulation and the alternate calculation methods. The selected field tests have been conducted in fractured limestone aquifers. The pumping test west of Copenhagen shows an example of fractured aquifer with considerable negative skin effect at the well face. The flowing well Wafra W1 in Kuwait operates in the two-zone aquifer exhibiting sufficient vertical recharge via leakage beyond a circular domain of estimated radius of 2460 m.     

Flowpath Independent Monitoring of Reductive Dechlorination Potential in a Fractured Rock Aquifer

The flowpath dependent approaches that are typically employed to assess biodegradation of chloroethene contaminants in unconsolidated aquifers are problematic in fractured rock settings, due to difficulties defining discrete groundwater flowpaths in such systems. In this study, the variation in the potential for chloroethene biodegradation with depth was evaluated in a fractured rock aquifer using two flowpath independent lines of field evidence: (1) the presence of the three biochemical prerequisites [electron donor(s), chloroethene electron acceptor(s), and chlororespiring microorganism(s)] for efficient chloroethene chlororespiration and (2) the in situ accumulation of chloroethene reductive dechlorination daughter products. The validity of this approach was assessed by comparing field results with the results of [1, 2-¹⁴C] cis -DCE microcosm experiments. Microcosms were prepared with depth-specific core material, which was crushed and emplaced in discrete packer intervals for 1 year to allow colonization by the indigenous microbial community. Packer intervals characterized by significant electron donor concentrations, elevated numbers of chlororespiring microorganisms, and high reductive dechlorination product to parent contaminant ratios correlated well with the production of ¹⁴C-labeled reductive dechlorination products in the microcosm experiments. These results indicate that, in the absence of information on discrete groundwater flowpaths, a modified approach emphasizing flowpath independent lines of evidence can provide insight into the temporal and spatial variability of contaminant biodegradation in fractured rock systems.     

Vertical Delineation of Contamination in Fractured Bedrock Aquifer

The New Jersey Department of Environmental Protection's Technical Regulations require the horizontal and vertical delineation of contamination. Monitor wells screened at increasingly deeper intervals are used to delineate vertical contamination. In New Jersey, the open interval in a bedrock well cannot exceed 7.6 m. Since contamination has been found at depths as great as 91.4 m in a production well in the study area, it would be prohibitively expensive to install monitor wells with 7.6 m open holes at ever-increasing depths until no contamination was found. Isolation of discrete zones in boreholes using pneumatic packers was implemented at a site in north central New Jersey. Ground water samples were collected from selected 6.1 m sections of boreholes drilled into fractured bedrock at three locations on the property and one offsite location. The ground water samples were analyzed in a field laboratory. The analytical results were used to determine the vertical extent of gasoline-related compounds dissolved in the ground water on the property and offsite. These compounds include benzene, ethylbenzene, methyl tertiary butyl ether, toluene, and xylenes. The four boreholes were converted into bedrock monitor wells. The intake interval for each of the wells was selected through evaluation of the vertical distribution of contaminants as determined from analytical results obtained from a field laboratory located onsite. Three wells are used for the recovery of contaminated ground water. The recovered water will be treated at the onsite air-stripping unit. The fourth well is used to chemically and hydraulically monitor the progress of the ground water recovery program.     

Estimating Groundwater Mounding in Sloping Aquifers for Managed Aquifer Recharge

Design of managed aquifer recharge (MAR) for augmentation of groundwater resources often lacks detailed data, and simple diagnostic tools for evaluation of the water table in a broad range of parameters are needed. In many large‐scale MAR projects, the effect of a regional aquifer base dip cannot be ignored due to the scale of recharge sources (e.g., wadis, streams, reservoirs). However, Hantush's (1967) solution for a horizontal aquifer base is commonly used. To address sloping aquifers, a new closed‐form analytical solution for water table mound accounts for the geometry and orientation of recharge sources at the land surface with respect to the aquifer base dip. The solution, based on the Dupiuit‐Forchheimer approximation, Green's function method, and coordinate transformations is convenient for computing. This solution reveals important MAR traits in variance with Hantush's solution: mounding is limited in time and space; elevation of the mound is strongly affected by the dip angle; and the peak of the mound moves over time. These findings have important practical implications for assessment of various MAR scenarios, including waterlogging potential and determining proper rates of recharge. Computations are illustrated for several characteristic MAR settings.     

On Inflow to a Tunnel in a Fractured Double-Porosity Aquifer

Inflow to a tunnel is a great public concern and is closely related to groundwater hydrology, geotechnical engineering, and mining engineering, among other disciplines. Rapid computation of inflow to a tunnel provides a timely means for quickly assessing the inflow discharge, thus is critical for safe operation of tunnels. Dewatering of tunnels is another engineering practice that should be planned. In this study, an analytical solution of the inflow to a tunnel in a fractured unconfined aquifer is obtained. The solution takes into account either the spherical or slab-shaped matrix block and the unsteady state interporosity flow. The instantaneous drainage water table and anisotropic hydraulic conductivities of the fractures network are also considered. Both uniform flux and uniform head boundary condition are considered to simulate the constant head boundary condition in the tunnel. The effects of the hydraulic parameters of the fractured aquifer on the inflow variation of the tunnel are explored. The application of the presented solution to obtain the optimum location and discharge of the well to minimize the inflow to a tunnel is illustrated.     

A New Randomized Binary Prior Model for Hydraulic Tomography in Fractured Aquifers

We present a novel pilot-point-based hydraulic tomography (HT) inversion procedure to delineate preferential flow paths and estimate hydraulic properties in a fractured aquifer. Our procedure considers a binary prior model developed using a randomized algorithm. The randomized algorithm involves discretizing the domain into grid cells, assigning a binary label to each cell, traversing the grid randomly, and choosing the optimal grid configuration cell-by-cell. This binary prior model is used to guide the placement of pilot points and to constrain aquifer parameters during pilot-point-based HT inversion. A two-dimensional fractured granite rock block was considered to test our methodology under controlled laboratory conditions. Multiple pumping tests were conducted at selected ports and the pressure responses were monitored. The pumping datasets thus obtained were preprocessed using median filters to remove random noise, and then analyzed using the proposed procedure. The proposed binary prior algorithm was implemented in C++ by supplying the forward groundwater model, HydroGeoSphere (HGS). Pilot-point-assisted HT inversion was performed using the parameter-estimation tool, coupled to HGS. The resulting parameter distributions were assessed by: (1) a visual comparison of the K- and S_s-tomograms with the known topology of the fractures and (2) comparing model predictions with measurements made at two validation ports that were not used in calibration. The performance assessment revealed that HT with the proposed randomized binary prior could be used to recover fracture-connectivity and to predict drawdowns in fractured aquifers with reasonable accuracy, when compared to a conventional pilot-point inversion scheme.     

Decision Analysis for Leachate Control at a Fractured Rock Landfill

The municipal landfill at the Complexe Environnemental de Saint-Michel (CESM) in Montreal, which is the third largest in North America, is located in a former quarry in fractured limestone. Impressive measures are taken to monitor and control biogas and leachate generated at the site. Leachate containment is presently performed with a pumping well completed within the waste. The efficiency of the well in controlling off-site leachate migration is questioned because field observations strongly suggest that the nearby former Francon quarry is diverting local ground water flow. To address this issue, four additional hydraulic control options are considered: (1) increased pumping at the existing waste well; (2) new pumping wells in the rock on the eastern limit of the site; (3) new injection wells in the rock on the eastern limit; and (4) combination of new injection wells at the same location and new water supply wells upgradient of the landfill. We evaluated the four hydraulic control options at the CESM using two coupled models: (1) a decision model based on an objective function weighting the risk, costs, and benefits of each option translated into dollar units; and (2) a numerical ground water flow model to represent the effect of operational conditions and ascertain success. Decision analysis offers a quantitative unbiased tool to evaluate the potential and relative cost of each option, but qualitative considerations and judgment still must be used for a complete evaluation. Our analysis confirms that scenario 4, which was the intuitively favored option, represents the best containment strategy.