Formation of the regular satellites of giant planets in an extended gaseous nebula II: satellite migration and survival

For a satellite to survive in the disk the time scale of satellite migration must be longer than the time scale for gas dissipation. For large satellites (∼1000 km) migration is dominated by the gas tidal torque. We consider the possibility that the redistribution of gas in the disk due to the tidal torque of a satellite with mass larger than the inviscid critical mass causes the satellite to stall and open a gap (W.R. Ward, 1997, Icarus 26, 261-281). We adapt the inviscid critical mass criterion to include gas drag, and m-dependent nonlocal deposition of angular momentum. We find that such a model holds promise of explaining the survival of satellites in the subnebula, the mass versus distance relationship apparent in the saturnian and uranian satellite systems, the concentration of mass in Titan, and the observation that the satellites of Jupiter get rockier closer to the planet whereas those of Saturn become increasingly icy. It is also possible that either weak turbulence (close to the planet) or gap-opening satellite tidal torque removes gas on a similar time scale (10⁴-10⁵ years) as the orbital decay time of midsized (200-700 km) regular satellites forming in the inner disk (inside the centrifugal radius (I. Mosqueira and P.R. Estrada, 2003, Icarus, this issue)). We argue that Saturn’s satellite system bridges the gap between those of Jupiter and Uranus by combining the formation of a Galilean-sized satellite in a gas optically thick subnebula with a strong temperature gradient, and the formation of smaller satellites, closer to the planet, in a disk with gas optical depth ?1, and a weak temperature gradient.Using an optically thick inner disk (given gaseous opacity), and an extended, quiescent, optically thin outer disk, we show that there are regions of the disk of small net tidal torque (even zero) where satellites (Iapetus-sized or larger) may stall far from the planet. For our model these outer regions of small net tidal torque correspond roughly to the locations of Callisto and Iapetus. Though the precise location depends on the (unknown) size of the transition region between the inner and outer disks, the result that Saturn’s is found much farther out (at ∼3rcS, where rcS is Saturn’s centrifugal radius) than Jupiter’s (at ∼ 2rcJ, where rcJ is Jupiter’s centrifugal radius) is mostly due to Saturn’s less massive outer disk and larger Hill radius. However, despite the large separation between Ganymede and Callisto and Titan and Iapetus, the long formation and migration time scales for Callisto and Iapetus (I. Mosqueira and P.R. Estrada, 2003, Icarus, this issue) makes it possible (depending on the details of the damping of acoustic waves) that the tidal torque of Ganymede and Titan clears the gas disk out to their location, thus stranding Callisto and Iapetus far from the planet. Either way, our model provides an explanation for the presence of regular satellites outside the centrifugal radii of Jupiter and Saturn, and the absence of such a satellite for Uranus.     

Deciphering the origin of the regular satellites of gaseous giants - Iapetus: The Rosetta ice-moon

Ever since their discovery the regular satellites of Jupiter and Saturn have held out the promise of providing an independent set of observations with which to test theories of planet formation. Yet elucidating their origins has proven elusive. Here we show that Iapetus can serve to discriminate between satellite formation models. Its accretion history can be understood in terms of a two-component gaseous subnebula, with a relatively dense inner region, and an extended tail out to the location of the irregular satellites, as in the SEMM model of Mosqueira and Estrada (2003a,b) (Mosqueira, I., Estrada, P.R. [2003a]. Icarus 163, 198-231; Mosqueira, I., Estrada, P.R. [2003b]. Icarus 163, 232-255). Following giant planet formation, planetesimals in the feeding zone of Jupiter and Saturn become dynamically excited, and undergo a collisional cascade. Ablation and capture of planetesimal fragments crossing the gaseous circumplanetary disks delivers enough collisional rubble to account for the mass budgets of the regular satellites of Jupiter and Saturn. This process can result in rock/ice fractionation as long as the make up of the population of disk crossers is non-homogeneous, thus offering a natural explanation for the marked compositional differences between outer solar nebula objects and those that accreted in the subnebulae of the giant planets. For a given size, icy objects are easier to capture and to ablate, likely resulting in an overall enrichment of ice in the subnebula. Furthermore, capture and ablation of rocky fragments become inefficient far from the planet for two reasons: the gas surface density of the subnebula is taken to drop outside the centrifugal radius, and the velocity of interlopers decreases with distance from the planet. Thus, rocky objects crossing the outer disks of Jupiter and Saturn never reach a temperature high enough to ablate either due to melting or vaporization, and capture is also greatly diminished there. In contrast, icy objects crossing the outer disks of each planet ablate due to the melting and vaporization of water-ice. Consequently, our model leads to an enhancement of the ice content of Iapetus, and to a lesser degree those of Titan, Callisto and Ganymede, and accounts for the (non-stochastic) compositions of these large, low-porosity outer regular satellites of Jupiter and Saturn. For this to work, the primordial population of planetesimals in the Jupiter-Saturn region must be partially differentiated, so that the ensuing collisional cascade produces an icy population of ?1 m size fragments to be ablated during subnebula crossing. We argue this is likely because the first generation of solar nebula ∼10 km planetesimals in the Jupiter-Saturn region incorporated significant quantities of ²⁶Al. This is the first study successfully to provide a direct connection between nebula planetesimals and subnebulae mixtures with quantifiable and observable consequences for the bulk properties of the regular satellites of Jupiter and Saturn, and the only explanation presently available for Iapetus’ low density and ice-rich composition.     

Formation of the galilean satellites in a gaseous nebula

A model for Galilean satellite formation was analyzed in which the satellites accrete in the presence of a dense, gaseous disk-shaped nebula and rapidly form optically thick, gravitationally bound primordial atmospheres. Upper-bound temperatures expected during accretion lead to partially differentiated structures for both Ganymede and Callisto, although with Ganymede much more differentiated than Callisto. When allowance is made for the aerodynamic breaking of infalling planetesimal fragments, lower surface temperatures result, and the amount of partial differentiation of Callisto is small, possibly approaching zero for a narrow size distribution of infalling planetesimals. The model is chosen to be consistent with the observed densities of the Galilean satellites and our current understanding of Jupiter formation. The retention of ices more volatile than H₂O is considered but not modeled in detail. A nominal nebula of ～0.1 Jupiter masses is constructed by consideration of likely surface density profiles and existing Jupiter collapse calculations. This nebula is optically thick (even if grain opacity is ignored) in both radial and vertical directions and has a temperature profile T ～ 3600 (R_J/R), where R_J is Jupiter's radius and R is the radial distance in the disk midplane. Satellites accrete very rapidly (dynamical time scales being 10²–10⁴ years) and their optically thick gaseous envelopes are unable to eliminate the heat of accretion by radiation. Water-saturated, convective, adiabatic envelopes form, through which planetesimals fall, break up, and partially disseminate their mass. The resulting satellite surface temperatures during accretion are calculated. Possible implications of these models for the subsequent evolution of Ganymede and Callisto are explored and it is suggested that the extensive differentiation undergone by Ganymede may provide the right environment for subsequent resurfacing, whereas the relative lack of extensive differentiation for Callisto may explain the inferred absence of endogenic tectonism.     

Mass-radius relationships in icy satellites

Using published laboratory data for H₂O ice, we have developed a modeling technique by which the bulk density, density and temperature profile, rotational moment of inertia, central pressure, and location of the rock-ice interface can all be obtained as a function of the radius, the heliocentric distance, and the silicate composition. Models of the interiors of Callisto, Ganymede, Europa, Rhea, and Titan are given, consistent with present mass and radius data. The radius and mass of spheres of ice under self-gravitation for two different temperature classes are given (103 and 77°K). Measurements of mass, radius, and I/MR² by spacecraft can be interpreted by this model to yield substantial information about the internal structure and the ice: rock ratio of the icy satellites of Jupiter and Saturn.     

Models of the protosatellite disk of Saturn: Conditions for Titan’s formation

Models of the protosatellite accretion disk of Saturn are developed that satisfy cosmochemical constraints on the volatile abundances in the atmospheres of Saturn and Titan with due regard for the data obtained with the Cassini orbiter and the Huygens probe, which landed on Titan in January 2005. All basic sources of heating of the disk and protosatellite bodies are taken into account in the models, namely, dissipation of turbulence in the disk, accretion of gaseous and solid material onto the disk from the feeding zone of Saturn in the solar nebula, and heating by the radiation of young Saturn and thermal radiation of the surrounding region of the solar nebula. Two-dimensional (axisymmetric) temperature, pressure, and density distributions are calculated for the protosatellite disk. The distributions satisfy the cosmochemical constraints on the disk temperature, according to which the temperature at the stage of the satellite formation ranged from 60–65 K to 90–100 K at pressures from 10^?7 to ?10^?4 bar in the zone of Titan’s formation (according to estimates, r = 20–35R _Sat). Variations of the basic input parameters (the accretion rate onto the protosatellite disk of Saturn from the feeding zone of the planet ?; the parameter α characterizing turbulent viscosity of the disk; and the mass concentration ratio in the solid/gas system) satisfying the aforementioned temperature constraint are found. The spectrum of models satisfying the cosmochemical constraints covers a considerable range of consistent parameters. A model with a rather small flux of ? = 10^?8 M _Sat/ yr and a tenfold depletion of Saturn’s disk in gas due to gas scattering from the solar nebula is at one side of this range. A model with a much higher flux of ? = 10^?6 M _Sat/yr and a hundredfold decrease in opacity of the disk matter owing to decreased concentration of dust particles and/or their agglomeration into large aggregates and sweeping up by planetesimals is at the other side of the range.     

Mass-radius relationships in icy satellites after voyager

Using improved data for the masses and radii of the satellites of Jupiter and Saturn, models accounting for self-compression effects are presented for the interiors of Europa, Ganymede, Callisto, Rhea, and Titan. For the differentiated models, two different possible scenarios for heat transport are treated, as well as two different compositions for the silicate component. Undifferentiated models are also treated. In each case, the models of Ganymede, Callisto, and Titan show noticeable similarities. It is found that estimates of the ice-rock ratio are dependent upon the assumptions made about the heat transport mechanisms, the rock composition, and on the distribution of rock and ice in the satellite's interior.     

Nonhydrostatic effects and the determination of icy satellites’ moment of inertia

We compare the moment of inertia (MOI) of a simple hydrostatic, two layer body as determined by the Radau–Darwin Approximation (RDA) to its exact hydrostatic MOI calculated to first order in the parameter q = Ω²R³/GM, where Ω, R, and M are the spin angular velocity, radius, and mass of the body, and G is the gravitational constant. We show that the RDA is in error by less than 1% for many configurations of core sizes and layer densities congruent with those of solid bodies in the Solar System. We then determine the error in the MOI of icy satellites calculated with the RDA due to nonhydrostatic effects by using a simple model in which the core and outer shell have slight degree 2 distortions away from their expected hydrostatic shapes. Since the hydrostatic shape has an associated stress of order ρΩ²R² (where ρ is density) it follows that the importance of nonhydrostatic effects scales with the dimensionless number σ/ρΩ²R², where σ is the nonhydrostatic stress. This highlights the likely importance of this error for slowly rotating bodies (e.g., Titan and Callisto) and small bodies (e.g., Saturn moons other than Titan). We apply this model to Titan, Callisto, and Enceladus and find that the RDA-derived MOI can be 10% greater than the actual MOI for nonhydrostatic stresses as small as ∼0.1 bars at the surface or ∼1 bar at the core–mantle boundary, but the actual nonhydrostatic stresses for a given shape change depends on the specifics of the interior model. When we apply this model to Ganymede we find that the stresses necessary to produce the same MOI errors as on Titan, Callisto, and Enceladus are an order of magnitude greater due to its faster rotation, so Ganymede may be the only instance where RDA is reliable. We argue that if satellites can reorient to the lowest energy state then RDA will always give an overestimate of the true MOI. Observations have shown that small nonhydrostatic gravity anomalies exist on Ganymede and Titan, at least at degree 3 and presumably higher. If these anomalies are indicative of the nonhydrostatic anomalies at degree 2 then these imply only a small correction to the MOI, even for Titan, but it is possible that the physical origin of nonhydrostatic degree 2 effects is different from the higher order terms. We conclude that nonhydrostatic effects could be present to an extent that allows Callisto and Titan to be fully differentiated.     

Models of Jupiter's growth incorporating thermal and hydrodynamic constraints

We model the growth of Jupiter via core nucleated accretion, applying constraints from hydrodynamical processes that result from the disk-planet interaction. We compute the planet's internal structure using a well tested planetary formation code that is based upon a Henyey-type stellar evolution code. The planet's interactions with the protoplanetary disk are calculated using 3-D hydrodynamic simulations. Previous models of Jupiter's growth have taken the radius of the planet to be approximately one Hill sphere radius, RH. However, 3-D hydrodynamic simulations show that only gas within ∼0.25RH remains bound to the planet, with the more distant gas eventually participating in the shear flow of the protoplanetary disk. Therefore in our new simulations, the planet's outer boundary is placed at the location where gas has the thermal energy to reach the portion of the flow not bound to the planet. We find that the smaller radius increases the time required for planetary growth by ∼5%. Thermal pressure limits the rate at which a planet less than a few dozen times as massive as Earth can accumulate gas from the protoplanetary disk, whereas hydrodynamics regulates the growth rate for more massive planets. Within a moderately viscous disk, the accretion rate peaks when the planet's mass is about equal to the mass of Saturn. In a less viscous disk hydrodynamical limits to accretion are smaller, and the accretion rate peaks at lower mass. Observations suggest that the typical lifetime of massive disks around young stellar objects is ∼3 Myr. To account for the dissipation of such disks, we perform some of our simulations of Jupiter's growth within a disk whose surface gas density decreases on this timescale. In all of the cases that we simulate, the planet's effective radiating temperature rises to well above 1000 K soon after hydrodynamic limits begin to control the rate of gas accretion and the planet's distended envelope begins to contract. According to our simulations, proto-Jupiter's distended and thermally-supported envelope was too small to capture the planet's current retinue of irregular satellites as advocated by Pollack et al. [Pollack, J.B., Burns, J.A., Tauber, M.E., 1979. Icarus 37, 587-611].     

Core formation in giant gaseous protoplanets

Sedimentation rates of silicate grains in gas giant protoplanets formed by disk instability are calculated for protoplanetary masses between 1 MSaturn to 10 MJupiter. Giant protoplanets with masses of 5 MJupiter or larger are found to be too hot for grain sedimentation to form a silicate core. Smaller protoplanets are cold enough to allow grain settling and core formation. Grain sedimentation and core formation occur in the low mass protoplanets because of their slow contraction rate and low internal temperature. It is predicted that massive giant planets will not have cores, while smaller planets will have small rocky cores whose masses depend on the planetary mass, the amount of solids within the body, and the disk environment. The protoplanets are found to be too hot to allow the existence of icy grains, and therefore the cores are predicted not to contain any ices. It is suggested that the atmospheres of low mass giant planets are depleted in refractory elements compared with the atmospheres of more massive planets. These predictions provide a test of the disk instability model of gas giant planet formation. The core masses of Jupiter and Saturn were found to be ∼0.25 M_⊕ and ∼0.5 M_⊕, respectively. The core masses of Jupiter and Saturn can be substantially larger if planetesimal accretion is included. The final core mass will depend on planetesimal size, the time at which planetesimals are formed, and the size distribution of the material added to the protoplanet. Jupiter's core mass can vary from 2 to 12 M_⊕. Saturn's core mass is found to be ∼8 M_⊕.     

Three-body capture of irregular satellites: Application to Jupiter

We investigate a new theory of the origin of the irregular satellites of the giant planets: capture of one member of a ∼100-km binary asteroid after tidal disruption. The energy loss from disruption is sufficient for capture, but it cannot deliver the bodies directly to the observed orbits of the irregular satellites. Instead, the long-lived capture orbits subsequently evolve inward due to interactions with a tenuous circumplanetary gas disk.We focus on the capture by Jupiter, which, due to its large mass, provides a stringent test of our model. We investigate the possible fates of disrupted bodies, the differences between prograde and retrograde captures, and the effects of Callisto on captured objects. We make an impulse approximation and discuss how it allows us to generalize capture results from equal-mass binaries to binaries with arbitrary mass ratios.We find that at Jupiter, binaries offer an increase of a factor of ∼10 in the capture rate of 100-km objects as compared to single bodies, for objects separated by tens of radii that approach the planet on relatively low-energy trajectories. These bodies are at risk of collision with Callisto, but may be preserved by gas drag if their pericenters are raised quickly enough. We conclude that our mechanism is as capable of producing large irregular satellites as previous suggestions, and it avoids several problems faced by alternative models.     

Formation of terrestrial planets in a dissipating gas disk with Jupiter and Saturn

We have performed N-body simulations on final accretion stage of terrestrial planets, including the eccentricity and inclination damping effect due to tidal interaction with a gas disk. We investigated the dependence on a depletion time scale of the disk, and the effect of secular perturbations by Jupiter and Saturn. In the final stage, terrestrial planets are formed through coagulation of protoplanets of about the size of Mars. They would collide and grow in a decaying gas disk. Kominami and Ida [Icarus 157 (2002) 43-56] showed that it is plausible that Earth-sized, low-eccentricity planets are formed in a mostly depleted gas disk. In this paper, we investigate the formation of planets in a decaying gas disk with various depletion time scales, assuming disk surface density of gas component decays exponentially with time scale of τ_gas. Fifteen protoplanets with are initially distributed in the terrestrial planet regions. We found that Earth-sized planets with low eccentricities are formed, independent of initial gas surface density, when the condition (τ_cross+τ_growth)/2?τ_gas?τ_cross is satisfied, where τ_cross is the time scale for initial protoplanets to start orbit crossing in a gas-free case and τ_growth is the time scale for Earth-sized planets to accrete during the orbit crossing stage. In the cases satisfying the above condition, the final masses and eccentricities of the largest planets are consistent with those of Earth and Venus. However, four or five protoplanets with the initial mass remain. In the final stage of terrestrial planetary formation, it is likely that Jupiter and Saturn have already been formed. When Jupiter and Saturn are included, their secular perturbations pump up eccentricities of protoplanets and tend to reduce the number of final planets in the terrestrial planet regions. However, we found that the reduction is not significant. The perturbations also shorten τ_cross. If the eccentricities of Jupiter and Saturn are comparable to or larger than present values (∼0.05), τ_cross become too short to satisfy the above condition. As a result, eccentricities of the planets cannot be damped to the observed value of Earth and Venus. Hence, for the formation of terrestrial planets, it is preferable that the secular perturbations from Jupiter and Saturn do not have significant effect upon the evolution. Such situation may be reproduced by Jupiter and Saturn not being fully grown, or their eccentricities being smaller than the present values during the terrestrial planets' formation. However, in such cases, we need some other mechanism to eliminate the problem that numerous Mars-sized planets remain uncollided.     

Physisorption of CO2 on non-ice materials relevant to icy satellites

CO₂ is known to adsorb onto clay and other minerals when a significant atmospheric pressure is present. We have found that CO₂ can also adsorb onto some clays when the CO₂ partial pressure is effectively zero under ultra-high vacuum (UHV) if cooled to the surface temperatures of the icy satellites of Jupiter and Saturn. The strength of adsorption and the spectral characteristics of the adsorbed CO₂ infrared (IR) ν₃ absorption band near 4.25 μm depend on the composition and temperature of the adsorbent. CO₂ remains adsorbed onto the clay mineral montmorillonite for >10 s of min when exposed to a vacuum of ∼1×¹⁰⁻⁸ Torr at ∼125 K. CO₂ does not adsorb onto serpentine, goethite, or palagonite under these conditions. A small amount may adsorb onto kaolinite. When heated above 150 K under vacuum, the CO₂ desorbs from the montmorillonite within a few minutes. The ν₃ absorption band of CO₂ adsorbed onto montmorillonite at 125 K is similar to that of the CO₂ detected on the saturnian and Galilean satellites and is markedly different from CO₂ adsorbed onto montmorillonite at room temperature. We infer the adsorption process is physisorption and postulate that this mechanism may explain the presence and spectral characteristics of the CO₂ detected in the surfaces of these outer satellites.     

Accretion disks around Jupiter and Saturn at the stage of regular satellite formation

Modern models of the formation of the regular satellites of giant planets, constructed with consideration for their structure and composition suggest that this process lasted for a considerable period of time (0.1–1 Myr) and developed in gas-dust circumplanetary disks at the final stage of giant planet formation. The parameters of protosatellite disks (e.g., the radial distribution of surface density and temperature) serve as important initial conditions for such models. Therefore, the development of protosatellite disk models that take into account currently known cosmochemical and physical restrictions remains a pressing problem. It is this problem that is solved in the paper. New models of the accretion disks of Jupiter and Saturn were constructed with consideration for the disk heating by viscous dissipation of turbulent motions, by accretion of material from the surrounding region of the solar nebula, and by radiation from the central planets. The influence of a set of input model parameters (the total rate of mass infall onto the disk, the turbulent viscosity and opacity of disk material, and the centrifugal radius of the disk) on thermal conditions in the accretion disks was studied. The dependence of opacity on temperature and the abundance and size of solid particles present in the disk was taken into account. Those constructed models that satisfy the existing constraints limit the probable values of input parameters (primarily rates of mass infall onto the disks of Jupiter and Saturn at the stage of regular satellite formation and, to a lesser extent, the disk opacities). Constraints on the location of the regions of formation of the major satellites of Jupiter and Saturn are suggested based on the constructed models and simple analytical estimates concerning the formation of satellites in the accretion disks. It is shown that Callisto and Titan could hardly be formed at significantly greater distances from their planets.     

Constraints on gas giant satellite formation from the interior states of partially differentiated satellites

An icy satellite whose interior is composed of a homogeneous ice/rock mixture must avoid melting during its entire history, including during its formation when it was heated by deposition of accretional energy and short-lived radioisotopes. Estimates of the temperature rise associated with radiogenic and accretional heating, coupled with limits on satellite melting can be used to constrain the timing of formation of a partially differentiated satellite relative to the origin of the calcium-aluminum-rich inclusions (CAI's) as a function of its accretion timescale and the protosatellite disk temperature (Td). Geological characterization and spacecraft radio tracking data suggest that Callisto, the outermost regular satellite of Jupiter, and Saturn's mid-sized satellite Rhea, are partially differentiated if their interiors are in hydrostatic equilibrium. Because the specific conditions during the satellites' formation are uncertain, we determine accretional temperature profiles for a range of values for Td and accretion time scales with the limiting assumption that impactors deposit all their energy close to the surface, leading to maximally effective radiative cooling. We find that Callisto can remain unmelted during formation if it accreted on a time scale longer than 0.6 Myr. Considering both radiogenic and accretional heating, Callisto must have finished accreting no earlier than ∼4 Myr after formation of CAI's for Td=100 K. Warmer disks or larger impactors that deposit their energy at depth in the satellite would require longer and/or later formation times. If Rhea accreted slowly (in 10⁵ to 10⁶ years), its growth must have finished no earlier than ∼2 Myr after CAI's for 70 K?Td?250 K to avoid early melting. If Rhea formed quickly (?10³ yr), its formation must have been delayed until at least 2 to 7 Myr after CAI's and in a disk with Td<190 K in the small impactor limit. If the satellites form in slow-inflow-supplied disks as proposed by Canup and Ward [Canup, R.M., Ward, W.R., 2002. Astron. J. 124, 3404-3423], the implied satellite ages suggest that gas inflow to the giant planets ceased no earlier than ∼4 Myr after CAI's, comparable to average nebular lifetimes inferred from observations of circumstellar disks.     

2.7- to 4.1-μm spectrophotometry of icy satellites of Saturn and Jupiter

We present spectrophotometry in the 27–41 μm spectral region for icy satellites of Saturn (Tethys, Dione, Rhea, Iapetus, and Hyperion) and Jupiter (Europa, Ganymede, and Callisto). The 3.6-μm reflectance peak characteristic of fine-grained water ice is observed prominently on the satellites of Saturn, faintly on the leading side of Europa, and not all on Ganymede, Callisto, or the dark side of Iapetus. The spectral reflectances of these icy satellites may be affected by their equilibrium surface temperatures and magnetospheric effects.     

Building the terrestrial planets: Constrained accretion in the inner Solar System

To date, no accretion model has succeeded in reproducing all observed constraints in the inner Solar System. These constraints include: (1) the orbits, in particular the small eccentricities, and (2) the masses of the terrestrial planets - Mars’ relatively small mass in particular has not been adequately reproduced in previous simulations; (3) the formation timescales of Earth and Mars, as interpreted from Hf/W isotopes; (4) the bulk structure of the asteroid belt, in particular the lack of an imprint of planetary embryo-sized objects; and (5) Earth’s relatively large water content, assuming that it was delivered in the form of water-rich primitive asteroidal material. Here we present results of 40 high-resolution (N = 1000-2000) dynamical simulations of late-stage planetary accretion with the goal of reproducing these constraints, although neglecting the planet Mercury. We assume that Jupiter and Saturn are fully-formed at the start of each simulation, and test orbital configurations that are both consistent with and contrary to the “Nice model”. We find that a configuration with Jupiter and Saturn on circular orbits forms low-eccentricity terrestrial planets and a water-rich Earth on the correct timescale, but Mars’ mass is too large by a factor of 5-10 and embryos are often stranded in the asteroid belt. A configuration with Jupiter and Saturn in their current locations but with slightly higher initial eccentricities (e = 0.07-0.1) produces a small Mars, an embryo-free asteroid belt, and a reasonable Earth analog but rarely allows water delivery to Earth. None of the configurations we tested reproduced all the observed constraints. Our simulations leave us with a problem: we can reasonably satisfy the observed constraints (except for Earth’s water) with a configuration of Jupiter and Saturn that is at best marginally consistent with models of the outer Solar System, as it does not allow for any outer planet migration after a few Myr. Alternately, giant planet configurations which are consistent with the Nice model fail to reproduce Mars’ small size.     

On the origin and initial temperature of Jupiter and Saturn

A two-stage growth of the giant planets, Jupiter and Saturn, is considered, which is different from the model of contraction of large gaseous protoplanets. In the first stage, within a time of ～3 × 10⁷ years in Jupiter's zone and ～2 × 10⁸ years in Saturn's zone, a nucleus forms from condensed (solid) material having the mass, ～10²⁸ g, necessary for the beginning of acceleration. The second stage may gravitating body, and a relatively slow accretion begins until the mass of the planet reaches ～10 m_⊕. Then a rapid accretion begins with the critical radius less than the radius of the Hill lobe, so that the classical formulae for the rate of accretion may be applied. At a mass m > m₁ ≈ 50 m_⊕ accretion proceeds slower than it would according to these formulae. When the planet sweeps out all the gas from its nearest zone of feeding (m = m₂ ≈ 130 m_⊕), the width of the exhausted zone being $\text{～}\text{built1}\text{3}$ of the whole zone of the planet) growth is provided the slow diffusion of gas from the rest of the zone (time scale increases to 10⁵?10⁶ years and more). The process is terminated by the dissipation of the remnants of gas. In Saturn's zone m₁ > m₂ ≈ 30 m_⊕. The initial mass of the gas in Jupiter's zone is estimated. Before the beginning of the rapid accretion about 90% of the gas should have been lost from the solar system, and in the planet's zone less than two Jupiter masses remain. The highest temperature of Jupiter's surface, ≈5000°K, is reached at the stage of rapid accretion, m < 100 m_⊕, when the luminosity of the planet reaches 3 × 10^?3 L_⊙. This favors an effective heating of the inner parts of the accretionary disk and the dissipation of gas from the disk. The accretion of Saturn produced a temperature rise up to 2000?2400° K (at m ≈ 20?25 m_⊕) and a luminosity up to 10^?4 L_⊙.     

The discovery of faint irregular satellites of Uranus

We report the discovery of four new uranian irregular satellites in our deep, m_R∼25.4, optical search around that planet. The orbital properties of these satellites are diverse. There is some grouping of inclinations and one of the satellites appears to be inside the Kozai resonant zone of Uranus. Further, we find that the differential size distribution of satellites is rather shallow compared to objects in the asteroid and Kuiper belts, going as ∼r^−2.4. We also report a strong coupling between semi-major axis and orbital eccentricity. We comment on the apparent paradox between the inclination grouping, shallow size distribution, and orbital correlation as they relate to the likelihood of a collisional origin for the uranian irregulars. The currently observed irregulars appear to be consistent with a disruptive formation process and a collisional origin for Uranus' obliquity.     

Production of organic molecules in the outer solar system by proton irradiation: Laboratory simulations

In the past few years considerable attention has been given to the determination of likely compounds that could account for the various colors observed in the outer solar system: and to possible formation mechanisms for these compounds. Many experiments have been done using electrical discharges (Chadha, M. S., et al., 1971, Icarus15, 39) and ultraviolet light (Khare, B. N., and Sagan, C., 1973, Icarus20, 311) on mixtures of CH₄, NH₃, and H₂S, which are most likely the dominant minor constituents of the atmospheres of Jupiter, Saturn, Titan, and possibly the other satellites early in their histories. Colored polymers, usually brownish-red, have been produced in these experiments. With the passage of Pioneer 10 around Jupiter, there is another source of energy worthy of consideration, energetic protons (and electrons). Preliminary experiments to investigate the formation of colored polymers and other interesting molecules by the irradiation of gas mixtures by protons are discussed. Two to four Mev protons were used, with corresponding beam fluxes (as measured at 6R_J from the planet) equivalent to approximately 80 Earth years at Jupiter per hour of exposure. As in the other types of experiments, colored polymers have been produced. An important feature of this work is the presence or absence of absorption at 5 μm in the different materials produced; Titan is quite dark at this wavelength and Io is fairly bright. Such features may provide criteria for accepting or rejecting various materials produced in these experiments as reasonable coloring agents for the outer solar system.