Metamorphic and post-metamorphic fluid flow in the low-grade rocks of the Harlech Dome, north Wales

A combination of fluid inclusion, stable isotope and geochemical techniques has been used to study the nature of fluids present and their behaviour during Caledonian low-grade metamorphism of the Harlech Dome, north Wales. Fluid inclusion studies show that in most of the metasedimentary sequence the peak metamorphic fluid was an aqueous Na–K–Cl brine but in the graphitic Clogau Formation and in parts of the overlying Maentwrog Formation immiscible H₂O-rich and CH₄-rich fluids coexisted. Late-stage inclusions are of calcium-rich brine and a dilute aqueous fluid. The chemical composition of chlorite in metamorphic veins and rocks varies between different formations and quartz-oxygen isotopic compositions show considerable variation between different units. Both of these features are taken to indicate that there was little or no pervasive movement of fluid between different units at the peak of metamorphism. After the metamorphic peak there was focused flow of fluid upward through the sequence along fractures, in response to end-Caledonian uplift and unloading. Where the migrating fluid crossed the graphitic shales, interaction between the fluid and the shales gave rise to the formation of the auriferous veins of the Dolgellau Gold Belt. Subsequent to this mineralizing event there was widespread development of ¹⁸O-enriched calcites and micas. In the case of vein minerals it is possible that these crystallized directly from late-stage fluids at lower temperature than the quartz in the same veins. Alternatively, the original vein minerals may have re-equilibrated with later ¹⁸O-enriched or cooler fluid. In the case of muscovites in the rock matrix it is proposed that the isotopically heavy compositions are the result of re-equilibration of initially light grains with an introduced fluid, requiring considerable influx of fluid. This event may relate to either of two late-stage fluids observed as inclusions.     

Geochemical constraints of the eclogite and granulite facies metamorphism as recognized in the Raobazhai complex from North Dabie Shan,China

A combined study of major and trace elements, fluid inclusions and oxygen isotopes has been carried out on garnet pyroxenite from the Raobazhai complex in the North Dabie Terrane (NDT). Well‐preserved compositional zoning with Na decreasing and Ca and Mg increasing from the core to rim of pyroxene in the garnet pyroxenite indicates eclogite facies metamorphism at the peak metamorphic stage and subsequent granulite facies metamorphism during uplift. A P–T path with substantial heating (from c. 750 to 900 °C) after the maximum pressure reveals a different uplift history compared with most other eclogites in the South Dabie Terrane (SDT). Fluid inclusion data can be correlated with the metamorphic grade: the fluid regime during the peak metamorphism (eclogite facies) was dominated by N₂‐bearing NaCl‐rich solutions, whereas it changed into CO₂‐dominated fluids during the granulite facies retrograde metamorphism. At a late retrograde metamorphic stage, probably after amphibolite facies metamorphism, some external low‐salinity fluids were involved. In situ UV‐laser oxygen isotope analysis was undertaken on a 7 mm garnet, and impure pyroxene, amphibole and plagioclase. The nearly homogeneous oxygen isotopic composition (δ¹⁸O_VSMOW = c. 6.7‰) in the garnet porphyroblast indicates closed fluid system conditions during garnet growth. However, isotopic fractionations between retrograde phases (amphibole and plagioclase) and garnet show an oxygen isotopic disequilibrium, indicating retrograde fluid–rock interactions. Unusual MORB‐like rare earth element (REE) patterns for whole rock of the garnet pyroxenite contrast with most ultra‐high‐pressure (UHP) eclogites in the Dabie‐Sulu area. However, the age‐corrected initial ε_Nd(t) is ? 2.9, which indicates that the protolith of the garnet pyroxenite was derived from an enriched mantle rather than from a MORB source. Combined with the present data of oxygen isotopic compositions and the characteristic N₂ content in the fluid inclusions, we suggest that the protolith of the garnet pyroxenite from Raobazhai formed in an enriched mantle fragment, which has been exposed to the surface prior to the Triassic metamorphism.     

Fluid inclusions in high-grade gneisses of the Kapuskasing structural zone,Ontario: metamorphic fluids and uplift/erosion path

Fluid inclusions in quartz grains from five samples of high-grade rocks (two paragneisses, an amphibolite, a mafic gneiss and a tonalite dike) from the 2.7 Ga Kapuskasing structural zone (KSZ), Ontario, were examined with petrographic, microthermometric and laser Raman techniques. Three types of fluid inclusions were observed: CO₂-rich, H₂O-rich and mixed CO₂-H₂O. CO₂-rich fluid inclusions are pseudosecondary or secondary in nature and are generally pure CO₂; a few contain varying amounts of CH₄·H₂O-rich fluid inclusions are secondary in nature, contain variable amounts of dissolved salts, and generally contain daughter crystals. Mixed CO₂-H₂O fluid inclusions occur where trails of H₂O-rich inclusions intersect trails of CO₂-rich inclusions. Isochores for high density (p=1.03 g/cm³) pseudosecondary, pure CO₂ inclusions intersect the lower pressure portion of the estimated P-T field for high-grade metamorphism, implying that pure CO₂ was the peak metamorphic fluid. The variable CH₄ content of CO₂ inclusions within graphite-bearing samples suggests that CH₄ was introduced locally after the formation of the CO₂ inclusions; however the origin of the CH₄ remains problematic. An aqueous fluid clearly penetrated the gneisses after the peak metamorphism (during uplift/erosion), forming secondary inclusions and contributing to the minor retrogressive hydration observed in these rocks. The presence of the pseudosecondary, high-density CO₂ inclusions in quartz crystals in the KSZ rocks constrains the uplift/ erosion path for the KSZ to one of simultaneous decrease in pressure and temperature.     

西藏邦布石英脉型金矿床的成因: 流体包裹体及氢-氧同位素证据

西藏邦布石英脉型金矿床是产于印度-亚洲板块陆-陆造山主碰撞汇聚环境下、与大洋俯冲无关的新型造山型金矿床。该矿床位于雅鲁藏布江缝合带南侧朗杰学增生楔的东段南缘,矿体受区域内EW向金地-鲁农复向斜和错古-折木朗壳型脆-韧性剪切带及其次级构造的控制。金矿化主要与石英脉密切相关,并包裹于脉内细粒/粗粒硫化物中。矿区内主要分布有3期石英脉:成矿前钩状石英脉、成矿期石英大脉和成矿后陡立状石英脉。文章对3期石英脉流体包裹体形态、形成温度、密度及H-O同位素等方面进行了详细的对比研究,试图查明成矿流体来源以及金的沉淀机制等问题。研究表明,钩状石英脉内包裹体主要为液相(L)包裹体,成分主要为H₂O溶液,其流体可能为早期区域变质的产物;石英大脉内包裹体主要为含CO₂气液(VL)两相包裹体,体积较大,成分主要为H₂O+CO₂+CH₄±N₂,成矿流体为深源变质流体,并与变质地层中的有机质发生强烈反应;陡立状石英脉内包裹体主要为气液两相包裹体,体积较小,其主要成分为H₂O+CO₂,流体主要与后期区域变质事件有关,为成矿后变质作用的产物。邦布金矿的主要成矿流体源自深部变质流体,流体不混溶作用可能是导致金矿沉淀的主要原因。     

Production of carbonic fluids during metamorphism of graphitic pelites in a collisional orogen—An assessment from fluid inclusions

Fluid inclusions in quartz veins within Proterozoic metamorphic rocks in the Black Hills, South Dakota, were examined by microthermometry and Raman spectroscopy to assess the evolution of fluid compositions during regional metamorphism of organic-rich shales and late-orogenic magmatism, both of which were related to the collision of the Wyoming and Superior crustal blocks. Fluid inclusions occur in veins that began to be generated before or during regional compression and metamorphism that reached at least garnet-grade conditions, and in veins within the aureole of the Harney Peak Granite (HPG), where temperatures reached second-sillimanite grade conditions. Early veins in the schists have undergone recrystallization during heating and deformation that modified the composition of early CH₄ or CO₂ and N₂-dominated inclusions. These fluids were apparently trapped under conditions of immiscibility with a saline aqueous fluid phase. They are interpreted to represent components generated during maturation of organic matter and dehydration of phyllosilicates during incipient metamorphism at reducing fO₂ conditions. Most inclusions in the quartz veins are, however, secondary CO₂-bearing. They imply a transition to higher fO₂ conditions with increasing temperature of regional metamorphism. The fO₂ conditions may have been controlled by the mineral assemblage in the host metapelites. The prevalence of bimodal distributions of trapped CO₂-N₂ and aqueous endmembers in the biotite and garnet zones also suggests that two immiscible fluid phases existed during the regional metamorphism.In the aureole of the HPG, graphite was evidently consumed by influx of magmatic fluids. CO₂-H₂O fluid inclusions dominate, but they have significantly less N₂ than inclusions at lower metamorphic grades. All inclusions define secondary trails in mostly unstrained quartz. The bimodality of inclusion compositions is not as well defined as at lower grades, with many inclusions containing intermediate CO₂-H₂O compositions. This suggests that a single fluid phase existed at the high temperatures in the granite aureole, but then unmixed during cooling. A set of late quartz veins with graphitized and tourmalinized selvages in the granite aureole contains CH₄-bearing inclusions with little N₂. The existence of CH₄ in these inclusions is attributed to complexing of magmatic B with hydroxyl anions taken from the CO₂-H₂O fluid phase, effectively causing reduction in fO₂ and promoting precipitation of graphite.     

Pressure-temperature and evolution of fluid compositions of Al2SiO5-bearing rocks,Mica Creek,B.C., in light of fluid inclusion data and mineral equilibria

Metamorphosed pelitic rocks from Mica Creek, British Columbia contain sillimanite, kyanite with minor fibrolite and andalusite-bearing quartz pods. Mineral equilibria were used to infer peak P-T conditions and fluid compositions in equilibrium with the solid phases. Fluid inclusions in three schist samples appear to be good indicators of conditions affecting those rocks during and after peak metamorphic conditions. In samples from two localities, fluid inclusions from schist and quartz-rich segregations have densities appropriate to the peak metamorphic conditions. The observed compositions for these fluids (low salinity with 12 mole % dissolved CO₂) agree with calculated values of 0.84 to 0.85, based upon paragonite-quartz-albite-Al₂SiO₅ equilibria. The fluids unmixed as the schists were uplifted and cooled; fluid inclusions trapped during this stage outline a solvus in the CO₂-H₂O-NaCl system. A later influx of fluids containing CH₄ and N₂ accompanied formation of andalusite-bearing plagioclaserich segregations. The restricted association of andalusite-bearing pods and low density fluids suggest a localized but pervasive fluid influx during uplift. Preservation of high density fluid inclusions during uplift and erosion, coupled with evidence for unmixing of H₂O- and CO₂-rich fluids on the solvus, provide constraints on the P-T uplift path.     

Fluid evolution of the Hub Stock, Horní Slavkov–Krásno Sn–W ore district, Bohemian Massif, Czech Republic

The Horní Slavkov–Krásno Sn–W ore district is hosted by strongly altered Variscan topaz–albite granite (Krudum granite body) on the northwestern margin of the Bohemian Massif. We studied the fluid inclusions on greisens, ore pockets, and ore veins from the Hub Stock, an apical expression of the Krudum granite. Fluid inclusions record almost continuously the post-magmatic cooling history of the granite body from ～500 to <50°C. Rarely observed highest-temperature (～500°C) highest-salinity (～30?wt.% NaCl eq.) fluid inclusions are probably the result of secondary boiling of fluids exsolved from the crystallizing magma during pressure release which followed hydraulic brecciation of the gneissic mantle above the granite cupola. The greisenization was related to near-critical low-salinity (0–7?wt.% NaCl eq.) aqueous fluids with low amount of CO₂, CH₄, and N₂ (≤10?mol% in total) at temperatures of ～350–400°C and pressures of 300–530 bar. Crush-leach data display highly variable and negatively correlated I/Cl and Br/Cl values which are incompatible with both orthomagmatic and/or metamorphic origin of the fluid phase, but can be explained by infiltration of surficial and/or sedimentary fluids. Low fluid salinity indicates a substantial portion of meteoric waters in the fluid mixture that is in accordance with previous stable isotope data. The post-greisenization fluid activity associated with vein formation and argillitization is characterized by decreasing temperature (<350 to <50°C), decreasing pressure (down to ～50–100 bar), and mostly also decreasing salinity.     

Fluid inclusions in coesite-bearing eclogites and jadeite quartzite at Shuanghe, Dabie Shan (China)

Fluid inclusions in coesite‐bearing eclogites and jadeite quartzite at Shuanghe in Dabie Shan, East‐central China, have preserved remnants of early, prograde and/or peak metamorphic fluids, reset during post‐UHP (ultrahigh‐pressure) metamorphic uplift. Inclusions occur in several minerals (e.g. omphacite & epidote), notably as isolated, primary inclusions in quartz included in various host minerals. Two major fluid types have been identified: non‐polar fluid species (N₂ or CO₂) and aqueous, the latter is by far the most predominant. Aqueous fluids cover a wide range of salinity, from halite‐bearing brines to low salinity fluids. For non‐polar fluids, few N₂ inclusions occur in undeformed eclogite, whereas a number of CO₂‐rich inclusions have been found in microshear zones of eclogite or jadeite quartzite in close proximity to marble occurrences. The primary character of N₂ and high‐salinity aqueous inclusions indicates that they are remnants from UHP metamorphic fluids and for some there is the distinct possibility that they are ultimately derived from pre‐metamorphic fluids. This conclusion is supported by the preservation, in some samples, of microdomains containing synchronous inclusions of variable salinities, which tend to relate to the chemical composition of the host crystal. Carbonic fluids may be derived from neighbouring rocks, notably marble and carbonate‐bearing metasediments, during post‐metamorphic uplift. During post‐UHP exhumation, a limited decrease of the fluid density has occurred, with formation of new sets of fluid inclusions. Fluid movements, however, remained exceedingly limited, at the scale of the enclosing crystal.     

The nature of fluids during pegmatite development in metamorphic terrains: Evidence from Hamadan complex,Sanandaj-Sirjan metamorphic zone,Iran

In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions are high salinity aqueous fluids (NaCl_eq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCl_eq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO₂-H₂O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO₂ were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types of fluid inclusions suggests that CO₂ fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites in metamorphic terrains.     

Fluid evolution during burial and Variscan deformation in the Lower Devonian rocks of the High-Ardenne slate belt (Belgium): sources and causes of high-salinity and C–O–H–N fluids

Fluid inclusions in quartz veins of the High-Ardenne slate belt have preserved remnants of prograde and retrograde metamorphic fluids. These fluids were examined by petrography, microthermometry and Raman analysis to define the chemical and spatial evolution of the fluids that circulated through the metamorphic area of the High-Ardenne slate belt. The earliest fluid type was a mixed aqueous/gaseous fluid (H₂O–NaCl–CO₂–(CH₄–N₂)) occurring in growth zones and as isolated fluid inclusions in both the epizonal and anchizonal part of the metamorphic area. In the central part of the metamorphic area (epizone), in addition to this mixed aqueous/gaseous fluid, primary and isolated fluid inclusions are also filled with a purely gaseous fluid (CO₂–N₂–CH₄). During the Variscan orogeny, the chemical composition of gaseous fluids circulating through the Lower Devonian rocks in the epizonal part of the slate belt, evolved from an earlier CO₂–CH₄–N₂ composition to a later composition enriched in N₂. Finally, a late, Variscan aqueous fluid system with a H₂O–NaCl composition migrated through the Lower Devonian rocks. This latest type of fluid can be observed in and outside the epizonal metamorphic part of the High-Ardenne slate belt. The chemical composition of the fluids throughout the metamorphic area, shows a direct correlation with the metamorphic grade of the host rock. In general, the proportion of non-polar species (i.e. CO₂, CH₄, N₂) with respect to water and the proportion of non-polar species other than CO₂ increase with increasing metamorphic grade within the slate belt. In addition to this spatial evolution of the fluids, the temporal evolution of the gaseous fluids is indicative for a gradual maturation due to metamorphism in the central part of the basin. In addition to the maturity of the metamorphic fluids, the salinity of the aqueous fluids also shows a link with the metamorphic grade of the host-rock. For the earliest and latest fluid inclusions in the anchizonal part of the High-Ardenne slate belt the salinity varies respectively between 0 and 3.5 eq.wt% NaCl and between 0 and 2.7 eq.wt% NaCl, while in the epizonal part the salinity varies between 0.6 and 17 eq.wt% NaCl and between 3 and 10.6 eq.wt% for the earliest and latest aqueous fluid inclusions, respectively. Although high salinity fluids are often attributed to the original sedimentary setting, the increasing salinity of the fluids that circulated through the Lower Devonian rocks in the High-Ardenne slate belt can be directly attributed to regional metamorphism. More specifically the salinity of the primary fluid inclusions is related to hydrolysis reactions of Cl-bearing minerals during prograde metamorphism, while the salinity of the secondary fluid inclusions is rather related to hydration reactions during retrograde metamorphism. The temporal and spatial distribution of the fluids in the High-Ardenne slate belt are indicative for a closed fluid flow system present in the Lower Devonian rocks during burial and Variscan deformation, where fluids were in thermal and chemical equilibrium with the host rock. Such a closed fluid flow system is confirmed by stable isotope study of the veins and their adjacent host rock for which uniform δ¹⁸0 values of both the veins and their host rock demonstrate a rock-buffered fluid flow system.     

Chemical and isotopic effects of retrogression in metamorphic fluid inclusions

Fluid inclusions may provide compositional and isotopic information about fluids from which the host mineral precipitated as long as the host mineral does not react with the fluid. Our transmission electron microscope (TEM) investigation of grain boundaries and of fluid inclusions in zoisite and quartz of high-pressure metamorphic rocks from Dabie Shan (eastern China) demonstrates daughter minerals, such as margarite, muscovite, calcite, and anhydrite. Their precipitation changes (1) the composition of the fluid by selective and mineral-specific removal of CO₂ (carbonates), H₂O (sheet silicates, hydration of the walls), or S (gypsum, anhydrite, sulfides), (2) the concentrations and proportions of ions dissolved in the fluid, and (3) the isotopic composition of the fluid because of isotopic fractionation between mineral precipitate and fluid and between unmixed fluids. Fluid leakage from overpressurized fluid inclusions with daughter minerals changes the overall chemical and isotopic composition of the inclusion irreversibly, even when the daughter crystals later redissolve. Such fluid loss yields a wide range of compositionally and isotopically different fluids from a single starting fluid. Depending on the relation between mineral reactions in and fluid loss from the inclusion, the fluid remaining in the inclusion and the fluid lost from the inclusion may appear entirely unrelated.     

四川里伍黑牛洞铜矿床成矿流体特征及矿床成因研究

黑牛洞铜矿床经历了早期韧性变形-变质作用和成矿期的韧-脆性变形作用。早期韧性变形-变质作用过程中围岩可能分异出含CO2流体,并形成顺片理发育的磁黄铁矿、黄铜矿等矿化。成矿期为伴随江浪穹窿隆升的韧-脆性变形期,含矿石英脉中流体包裹体主要以富液相流体包裹体为主,次为纯气相流体包裹体。流体包裹体成分测试结果显示,富液相流体包裹体主要成分为水,含少量CO2和甲烷等烃类碳质流体;纯气相流体包裹体主要为甲烷,表明成矿流体为富水含炭质流体。流体包裹体氢、氧同位素测试结果表明,黑牛洞矿床含矿流体中的水主要来源于围岩中的变质水。燕山期花岗岩侵位,江浪穹窿隆升,韧-脆性变形形成系列滑脱断层。在此减压、降温过程中,成矿流体被活化并聚集、填充到滑脱断层内。     

Geochemistry of highly saline fluids in siliciclastic sequences: genetic implications for post-Variscan fluid flow in the Moravosilesian Palaeozoic of the Czech Republic

Ubiquitous post-Variscan dolomites occur in Zn–Pb–Cu veins at the Nízký Jeseník Mountains and the Upper Silesian Basin (Lower and Upper Carboniferous siliciclastics at the eastern part of the Bohemian Massif). Crush–leach, stable isotope (oxygen and carbon) and microthermometry analysis of the fluid inclusions in dolomites enable understanding the geochemistry, origin and possible migration pathways of the fluids. Homogenisation temperatures of fluid inclusions range between 66 and 148°C, with generally higher temperatures in the Nízký Jeseník Mountains area than in the Upper Silesian Basin. The highest homogenisation temperatures (up to 148°C) have been found near major regional faults and the lowest in a distant position or at higher stratigraphic levels. Highly saline (16.6–28.4 eq. wt% NaCl) H₂O–NaCl–CaCl₂ ± MgCl₂ fluids occur in inclusions. Na–Cl–Br systematics of trapped fluids and a calculated oxygen isotopic fluid composition between ?0.9 and +3.0‰ V-SMOW indicate that the fluid was derived from evaporated seawater. Stable isotopic modelling has been used to explain stable isotopic trends. Isotopic values (δ¹³C = ?6.0/+2.0‰ V-PDB, δ¹⁸O = +15.5/+22.5‰ V-SMOW of dolomites) resulted from fractionation and crystallisation within an open system at temperatures between 80 and 160°C. Rock-buffering explains the isotopic composition at low w/r ratios. Organic matter maturation caused the presence of isotopically light carbon in the fluids and fluid–rock interactions largely controlled the fluid chemistry (K, Li, Br and Na contents, K/Cl, I/Cl and Li/Cl molar ratios). The fluid chemistry reflects well the interaction between the fluid and underlying limestones as well as with clay- and organic-rich siliciclastics. No regional trends in temperature or fluid geochemistry favour a fluid migration model characterised by an important vertical upward migration along major faults. A permeable basement and fractured sedimentary sequence enhanced the general nature of the fluid system. Fluid characteristics are comparable with the main post-Variscan fluid flow systems in the Polish (Cracow-Silesian ore district) and German sedimentary basins.     

Fluid inclusions in high-pressure granulites of the Pan-African belt in Tanzania (Uluguru Mts): a record of prograde to retrograde fluid evolution

The high-pressure granulites of the Uluguru Mountains are part of the Pan-African belt of Tanzania, the metamorphic evolution of which is characterized by an anticlockwise P-T path. Mineral assemblages that represent distinct metamorphic stages are selected for fluid inclusion studies in order to deduce the fluid evolution in metapelites and pyroxene granulites from the prograde to the retrograde stage. Fluid inclusion data improve the petrologically derived P-T path and confirm the anticlockwise evolution. Fluid inclusions in quartz enclosed in garnet porphyroblasts in metapelites preserve prograde fluids of CO₂–N₂ composition and later-trapped pure CO₂. During isochoric heating at temperatures near the peak of metamorphism, deformation and recrystallization led to fluid homogenization yielding N₂-poor CO₂ composition in the metapelites. Near-peak CO₂–N₂ fluid inclusions in quartz of metapelites and CO₂ inclusions in garnet-pyroxene granulites are characterized by perfect negative crystal shape. Garnet formed in veins and as coronas around orthopyroxene represent the near-isochoric/isobaric cooling stage which is characterized by high-density CO₂-rich fluid inclusions. Up to 15 mol% N₂ in some primary CO₂ inclusions in corona garnet indicate small-scale fluid heterogeneity during the static garnet growth. The fact that high-density fluid inclusions are preserved, suggests a shallow dP/dT slope of the uplift path. Nevertheless, some fluid inclusions decrepitated or re-equilibrated and low-density CO₂ inclusions were trapped in the garnet-pyroxene granulite while N₂–CH₄ inclusions formed in the metapelites. Different fluid compositions in metapelite and metabasite argue for an internal control of the fluid composition by phase equilibria. In shear zones where the pyroxene granulite was transformed into scapolite-biotite schist, CO₂–N₂ and low-density N₂–CH₄ fluid inclusions indicate several stages of tectonic activity and suggest fluid influx from the nearby metapelites. High- and low-salinity aqueous inclusions observed beside CO₂ inclusions in garnet-pyroxene granulites, in vein quartz and shear zones could be of high-grade origin but are mainly re-equilibrated or re-trapped along healed microfractures during lower-grade stages. Received: 21 May 1997 / Accepted: 6 October 1997     

高压超高压变质作用中的流体

文章强调了高压和超高压变质岩中流体包裹体的研究意义，重点论述了几个问题：（１）高压和超高压变质岩中流体包裹体的成分以含Ｎ２量高为特点，在大别山含柯石英榴辉岩中找到的高压榴辉岩阶段捕获的原生包裹体，其中气相组分含ＣＯ（摩尔分数）为１４％，表明流体来源于深部。原生流体包裹体的保存，要求在ｐ－Ｔ区间内的抬升轨迹与等容线近于平行。（２）在大别山高压和超高压榴辉岩中首次确认熔融包裹体的存在，由硅酸盐玻相和以ＣＯ２为主要成分的气相组成，并发现熔融包裹体中的玻相成分与主矿物相近。（３）高压和超高压变质期间的局部流体迁移可由榴辉岩中流体包裹体和矿物同位素成分（Ｈ－Ｃ－Ｏ）来显示。（４）高压和超高压变质中流体－熔体－岩石（矿物）相互作用是一个非常复杂的过程，并证实在榴辉岩相ｐ－Ｔ条件下岩石的部分熔融。（５）变质流体的成分与变质级之间存在着相关关系。     

Thermal metamorphism and H2O-CO2-NaCl immiscibility at Patapedia,Quebec: evidence from fluid inclusions

The methamorphic history of the Patapedia thermal zone, Gaspé, Quebec, is re-evaluated in the light of results obtained from a study of fluid inclusions contained in quartz phenocrysts of felsic dyke rocks. The thermal zone is characterised by calc-silicate bodies that have outwardly telescoping prograde metamorphic isograds and display extensive retrograde metamorphism with associated copper mineralization. Three distinct fluid inclusion types are recognized: a low to moderate salinity, high density aqueous fluid (Type I); a low density CO₂ fluid (Type II); and a high salinity, high density aqueous fluid (Type III). Fluid inclusion Types I and II predominate whereas Type III inclusions form <10% of the fluid inclusion population. All three fluid types are interpreted to have been present during prograde metamorphism. Temperatures and pressures of metamorphism estimated from fluid inclusion microthermometry and isochore calculations are 450°–500° C and 700–1000 bars, respectively. A model is proposed in which the metamorphism at Patapedia was caused by heat transferred from a low to moderate salinity fluid of partly orthomagmatic origin (Type I inclusions). During the early stages, and particularly in the deeper parts of the system, CO₂ produced by metamorphism was completely miscible in the aqueous hydrothermal fluid and locally resulted in high XCO₂ fluids. On cooling and/or migrating to higher levels these latter fluids exsolved high salinity aqueous fluids represented by the Type III inclusions. Most of the metamorphism, however, took place at temperature-pressure conditions consistent with the immiscibility of CO₂ and the hydrothermal fluid and was consequently accompanied by the release of large volumes of CO₂ vapour which is represented by Type II inclusions. The final stage of the history of the Patapedia aureole was marked by retrograde metamorphism and copper mineralization of a calcite-free calc-silicate hornfels in the presence of a low XCO₂ fluid.     

Fluid and gas migration in the North German Basin: fluid inclusion and stable isotope constraints

Fluid inclusions have been studied in minerals infilling fissures (quartz, calcite, fluorite, anhydrite) hosted by Carboniferous and Permian strata from wells in the central and eastern part of the North German Basin in order to decipher the fluid and gas migration related to basin tectonics. The microthermometric data and the results of laser Raman spectroscopy reveal compelling evidence for multiple events of fluid migration. The fluid systems evolved from a H₂O–NaCl±KCl type during early stage of basin subsidence to a H₂O–NaCl–CaCl₂ type during further burial. Locally, fluid inclusions are enriched in K, Cs, Li, B, Rb and other cations indicating intensive fluid–rock interaction of the saline brines with Lower Permian volcanic rocks or sediments. Fluid migration through Carboniferous sediments was often accompanied by the migration of gases. Aqueous fluid inclusions in quartz from fissures in Carboniferous sedimentary rocks are commonly associated with co-genetically trapped CH₄–CO₂ inclusions. P–T conditions estimated, via isochore construction, yield pressure conditions between 620 and 1,650 bar and temperatures between 170 and 300°C during fluid entrapment. The migration of CH₄-rich gases within the Carboniferous rocks can be related to the main stage of basin subsidence and stages of basin uplift. A different situation is recorded in fluid inclusions in fissure minerals hosted by Permian sandstones and carbonates: aqueous fluid inclusions in calcite, quartz, fluorite and anhydrite are always H₂O–NaCl–CaCl₂-rich and show homogenization temperatures between 120 and 180°C. Co-genetically trapped gas inclusions are generally less frequent. When present, they show variable N₂–CH₄ compositions but contain no CO₂. P–T reconstructions indicate low-pressure conditions during fluid entrapment, always below 500 bar. The entrapment of N₂–CH₄ inclusions seems to be related to phases of tectonic uplift during the Upper Cretaceous. A potential source for nitrogen in the inclusions and reservoirs is C_org-rich Carboniferous shales with high nitrogen content. Intensive interaction of brines with Carboniferous or even older shales is proposed from fluid inclusion data (enrichment in Li, Ba, Pb, Zn, Mg) and sulfur isotopic compositions of abundant anhydrite from fissures. The mainly light δ³⁴S values of the fissure anhydrites suggest that sulfate is either derived through oxidation and re-deposition of biogenic sulfur or through mixing of SO₄²⁻-rich formation waters with variable amounts of dissolved biogenic sulfide. An igneous source for nitrogen seems to be unlikely since these rocks have low total nitrogen content and, furthermore, even extremely altered volcanic rocks from the study area do not show a decrease in total nitrogen content.     

Fluid inclusion constraints on the uplift history of the metamorphosed massive sulphide deposits at Ducktown, Tennessee

Abstract Standard petrographic, microthermometric and Raman spectroscopic analyses of fluid inclusions from the metamorphosed massive sulphide deposits at Ducktown, Tennessee, indicate that fluids with a wide range of compositions in the C–O–H–N–S–salt system were involved in the syn- to post-metamorphic history of these deposits. Primary fluid inclusions from peak metamorphic clinopyroxene contain low-salinity, H₂O–CH₄ fluids and calcite, quartz and pyrrhotite daughter crystals. Many of these inclusions exhibit morphologies resembling those produced in laboratory experiments in which confining pressures significantly exceed the internal pressures of the inclusions. Secondary inclusions in metamorphic quartz from veins, pods, and host matrix record a complex uplift history involving a variety of fluids in the C–O–H–N–salt system. Early fluids were generated by local devolatilization reactions while later fluids were derived externally. Isochores calculated for secondary inclusions in addition to the chronology of trapping and morphological features of primary and secondary fluid inclusions suggest an uplift path which was concave toward the temperature axis over the P–T range 6–3 kbar and 550–225° C. Immiscible H₂O–CH₄–N₂–NaCl fluids were trapped under lithostatic to hydrostatic pressure conditions at 3–0.5 kbar and 215 ± 20° C. Entrapment occurred during Alleghanian thrusting, and the fluids may have been derived by tectonically driven expulsion of pore fluids and thermal maturation of organic material in lower-plate sedimentary rocks which are thought to underlie the deposits. Episodic fracturing and concomitant pressure decreases in upper-plate rocks, which host the ore bodies, would have allowed these fluids to move upward and become immiscible. Post-Alleghanian uplift appears to have been temperature-convex. Uplift rates of 0.10–0.05 mm year^?1 from middle Ordovician to middle Silurian – late Devonian, and 0.07–0.12 mm year^?1 from middle Silurian – late Devonian to late Permian are suggested by our uplift path and available geochronological data.     

P-T evolution and fluid inclusion characteristics of retrograded eclogites,Münchberg Gneiss Complex,Germany

Kyanite eclogites occur as part of the Münchberger nappe pile in NE-Bavaria, West Germany. Eclogites are overprinted by subsequent amphibolite facies metamorphism. The preservation of primary eclogitic textures as well as symplectitic textures are indicative of rapid decompression. Eclogite formation is estimated to have occurred under conditions of high H₂O-activities at pressures between 20 and 26 kbar and temperatures ranging between 590 and 660° C, as is shown by the coexistence of omphacite (Jd 50), kyanite, zoisite and quartz. Minimum pressure estimates, independent of the water activity, range between 9 and 16 kbar at the relevant temperatures. Detailed studies of fluid inclusion reveal two predominant groups of aqueous-brine inclusions: high salinity (14–17 wt% NaCl equiv.) and low salinity (0–8 wt% NaCl equiv.) inclusions. Fluid compositions of both groups of inclusions yield isochores passing close to the estimated amphibolite facies PT-field. The compositions of these fluids are in good agreement with fluid compositions considered from mineral equilibria. None of the fluid inclusions has densities appropriate for eclogite facies metamorphism, but probably reflect later amphibolite facies metamorphism.     

Pan-African high-grade metamorphism of southern Sinai,Egypt, fluid inclusion evidence

Fluid inclusions in the leucosomes of Wadi Feiran migmatites showed that CO ₂ , H₂O and (H₂O-CO₂) fluids were likely to have been present when partial melting began in these rocks. Low salinity, aqueous fluid, to a lesser extent, CO₂-rich fluids are the most abundant fluids. The present study suggests that high-density CO₂ inclusions were formed at the earliest stage, while H₂O inclusions were formed at the late stage. In an intermediate stage, low-density CO₂ and H₂O, CO₂ inclusions were formed. At the early stage of uplift and during melt crystallization, the CO₂-bearing vapour was trapped at grain boundaries. At the late stage of uplift, H₂O released at the time of crystallization of the melt was trapped as inclusions.