Multicausal environmental severity: A flexible framework for microtidal sandy beaches and the role of polychaetes as an indicator taxon

The aim of this paper is to study the macrofaunal community dynamics and the biological–environmental interactions in the mid- and sublittoral ecosystems of the microtidal Mediterranean sandy shores. Four sandy beaches, three on the island of Crete and one on the northwest coast of Italy were selected to investigate the spatial and temporal changes in the community structure and the associated environmental variables. The littoral zone, which has not been adequately studied in the Eastern Mediterranean, presents special interest not only from the scientific point of view but also for practical reasons of ecological management. The multivariate techniques revealed that the community pattern of the sandy beach macrofauna is mainly spatial rather than temporal. There are pronounced differences in species composition and abundance of the macrofaunal assemblages of the mid- and sublittoral zone. The multicausal environmental severity hypothesis appears to be valid for the sandy beach macrofaunal communities of the Mediterranean. The abundance and composition of the macrofaunal assemblages are highly variable and are affected by the synergistic effects of many environmental variables. The polychaete taxonomic assemblage structure closely follows the macrofaunal community pattern. Differences between the two patterns may arise from the different responses that polychaetes may show to the environmental stress.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

Biogeochemistry and dynamics of settling particle fluxes at the Antikythira Strait (Eastern Mediterranean)

For the first time, a 12-month trap experiment was conducted on both sides of the strait between Crete and Antikythira Island (Eastern Mediterranean Sea) from June 1994 to June 1995 as part of the PELAGOS experiment. Analyses of major chemical constituents, including carbohydrates and stable lead isotopes and Scanning Electron Microscope studies were performed on the trap samples. Total mass fluxes varied between 1 and 1273 mg m⁻² d⁻¹. The lowest fluxes observed were in summer and autumn 1994, when stratification of the water column was at its deepest. In general, mass fluxes exhibited very low values throughout this experiment confirming the strong oligotrophy of this area. The mean contents of the major constituents (carbonates, opal, lithogenic fraction) were quite similar during the survey and between traps, with the exception of organic carbon contents, which were highest (7–10%) in summer 1994, i.e. during the period of lowest mass fluxes. During the first 6-month deployment (summer–autumn 1994) there was an important mass flux peak, which was depleted in organic carbon, at the Ionian near-bottom trap. This event coincided with a violent wind episode, which may have caused the resuspension of particles, which were then transported down the steep continental slope on the Ionian side of the strait. A smaller peak in mass flux occurred at the Aegean near-bottom trap, coincident with rainfall. Both these events indicate that environmental factors can control flux variations in an oligotrophic environment. During the second 6-month deployment (winter–spring 1995) there was another important increase in mass fluxes, which occurred at all three traps, although in the Ionian traps mass flux peaks were delayed by one to two sampling intervals. The distance between the two mooring sites gives a rough estimate of a minimum horizontal advection speed of 2 cm s⁻¹ for this particulate transfer from the Aegean to the Ionian area. This estimate is in good agreement with the measured current velocities.     

Transient Eastern Mediterranean deep waters in response to the massive dense-water output of the Aegean Sea in the 1990s

We present a detailed account of the changing hydrography and the large-scale circulation of the deep waters of the Eastern Mediterranean (EMed) that resulted from the unique, high-volume influx of dense waters from the Aegean Sea during the 1990s, and of the changes within the Aegean that initiated the event, the so-called ‘Eastern Mediterranean Transient’ (EMT). The analysis uses repeated hydrographic and transient tracer surveys of the EMed in 1987, 1991, 1995, 1999, and 2001/2002, hydrographic time series in the southern Aegean and southern Adriatic Seas, and further scattered data. Aegean outflow averaged nearly 3 × 10⁶ m³ s⁻¹ between mid-1992 and late 1994, and was largest during 1993, when south and west of Crete Aegean-influenced deep waters extended upwards to 400 m depth. EMT-related Aegean outflow prior to 1992, confined to the region around Crete and to 1800 m depth-wise, amounted to about 3% of the total outflow. Outflow after 1994 up to 2001/2002, derived from the increasing inventory of the tracer CFC-12, contributed 20% to the total, of 2.8 × 10¹⁴ m³. Densities in the southern Aegean Sea deep waters rose by 0.2 kg/m³ between 1987 and 1993, and decreased more slowly thereafter. The Aegean waters delivered via the principal exit pathway in Kasos Strait, east of Crete, propagated westward along the Cretan slope, such that in 1995 the highest densities were observed in the Hellenic Trench west of Crete. Aegean-influenced waters also crossed the East Mediterranean Ridge south of Crete and from there expanded eastward into the southeastern Levantine Sea. Transfer into the Ionian mostly followed the Hellenic Trench, largely up to the trench’s northern end at about 37°N. From there the waters spread further west while mixing with the resident waters. Additional transfer occurred through the Herodotus Trough in the south. Levantine waters after 1994 consistently showed temperature–salinity (T–S) inversions in roughly 1000–1700 m depth, with amplitudes decreasing in time. The T–S distributions in the Ionian Sea were more diverse, one cause being added Aegean outflow of relatively lower density through the Antikithira Strait west of Crete. Spreading of the Aegean-influenced waters was quite swift, such that by early 1995 the entire EMed was affected. and strong mixing is indicated by near-linear T–S relationships observed in various places. Referenced to 2000 and 3000 dbar, the highest Aegean-generated densities observed during the event equaled those generated by Adriatic Sea outflow in the northern Ionian Sea prior to the EMT. A precarious balance between the two dense-water source areas is thus indicated. A feedback is proposed which helped triggering the change from a dominating Adriatic source to the Aegean source, but at the same time supported the previous long-year dominance of the Adriatic. The EMed deep waters will remain transient for decades to come.     

A geodetic investigation of the British sea slope anomaly

Abstract

A project was initiated in 1986 to investigate an apparent significant discrepancy between geodetic and oceanographic leveling determinations of mean sea level around the coast of Great Britain. In oceanographic terms this discrepancy is equivalent to a sea slope in a North‐South direction.

The project, which lasted for 3 years, has been carried out in conjunction with research groups at the University of Edinburgh, the Proudman Oceanographic Laboratory, and the Ordnance Survey of Great Britain. It has involved combining Global Positioning System (GPS)‐derived ellipsoidal height differences with a high‐precision geoid, leading to an independent determination of the orthometric heights of tide gauges along the east coast of Great Britain.

A major GPS campaign was observed in May 1988. Measurements were made at time gauges between Leith and Lowestoft while simultaneously making measurements at fiducial sites. The results of the 1988 and subsequent campaigns are presented and discussed, and details are given of further observation campaigns to monitor the vertical movement of tide gauges around the coast of Britain by GPS.     

Midlittoral polychaete communities in the Eastern Mediterranean Sea: new information from the implementation of the Natural Geography in Shore Areas (NaGISA) protocol and comparisons at local and regional scales

The aim of this study was to attempt to fill current knowledge gaps on midlittoral Mediterranean biodiversity at local and regional scales, by using benthic polychaetes as a model taxon. Two different data sets were analysed: (i) a quantitative data set from the two Natural Geography in Shore Areas (NaGISA) study sites in Crete and (ii) a qualitative data set from multiple sites across the Mediterranean. At the local scale, the results provide evidence that (i) discrete species communities are formed in midlittoral Mediterranean habitats, which vary by geographical location and year, depending on the scale of observation; (ii) macrophyte coverage and Chl‐a are the only environmental variables associated, albeit weakly, with the above pattern; (iii) although naturally disturbed, the Cretan NaGISA sites do not seem to experience any anthropogenic stress; (iv) environmental heterogeneity and history seem to be much less important in shaping the polychaete communities than inter‐specific interactions; however, it is not possible to specify at this stage whether local or regional processes or even their interactions may shape the polychaete communities. At the regional scale, the results indicate that (i) the only factor that seems to be involved in the regional pattern is the identity of the study providing the data sets, which implies variability and bias in how research projects are carried out, from the sampling design through to data collection and analysis; (ii) the Cretan NaGISA sites may be considered as representative of the habitat in the Mediterranean, under certain conditions.     

Cold seep communities in the deep eastern Mediterranean Sea: composition, symbiosis and spatial distribution on mud volcanoes

Two mud volcano fields were explored during the French–Dutch MEDINAUT cruise (1998) with the submersible NAUTILE, one south of Crete along the Mediteranean Ridge at about 2000 m depth (Olimpi mud field) and the other south of Turkey between 1700 and 2000 m depth (Anaximander mud field) where high methane concentrations were measured. Chemosynthetic communities were observed and sampled on six mud volcanoes and along a fault scarp. The communities were dominated by bivalves of particularly small size, belonging to families commonly found at seeps (Mytilidae, Vesicomyidae, Thyasiridae) and to Lucinidae mostly encountered in littoral sulfide-rich sediments and at the shallowest seeps. Siboglinid polychaetes including a large vestimentiferan Lamellibrachia sp. were also associated. At least four bivalve species and one siboglinid are associated with symbiotic chemoautotrophic bacteria, as evidenced by Transmission Electronic Microscopy and isotopic ratio measurements. Among the bivalves, a mytilid harbors both methanotrophic and sulfide-oxidizing bacteria. Video spatial analysis of the community distribution on three volcanoes shows that dense bivalve shell accumulations (mainly lucinids) spread over large areas, from 10% to 38% of the explored areas (2500–15000 m²) on the different volcanoes. Lamellibrachia sp. had different spatial distribution and variable density in the two mud volcano fields, apparently related with higher methane fluxes in the Anaximander volcanoes and maybe with the instability due to brines in the Olimpi area. The abundance and richness of the observed chemosynthetic fauna and the size of some of the species contrast with the poverty of the deep eastern Mediterranean. The presence of a specialized fauna, with some mollusk genera and species shared with other reduced environments of the Mediterranean, but not dominated by the large bivalves usually found at seeps, is discussed.     

Polychaetes (Annelida) in the Gut Contents of Goatfishes (Mullidae), With New Polychaete Records for the Mediterranean Coast of Israel and the Gulf of Elat (Red Sea)

Abstract. An analysis was made of polychaete prey in the guts of 5 species of goatfishes ( Mullidiw): Upeneus usymmetricus , a Lessepsian migrant goatfish collected from both Mediterranean and Elat (Red Sea) locations; Mullus sunnuletus, ill. burbcuus , and U. moluccensis , a Lessepsian migrant taken only in the eastern Mediterranean; and Mulloides flavolineatus , collected in the Gulf of Elat. Mullus barbutus accounts for nine new polychaete records for the Mediterranean coast of Israel. Mulloides flavolineatus fed on two species which arc new records for the Gulf of Elat; one, Lumbrineris meteorunu , is a new record for the Red Sea. The polychaete prey provides some information on the ecology of the fishes: There appears to be little overlap regarding polychaete prey among the different goatfish species in the Mediterranean.     

Morphology of a Pre-collisional, Salt-bearing, Accretionary Complex: The Mediterranean Ridge (Eastern Mediterranean)

The Eastern Mediterranean Sea is a remnant of a deep Mesozoic oceanic basin, now almost totally consumed as a result of long-term plate convergence between Eurasia and Africa. The present-day surface morphology of the Eastern Mediterranean relates both to the early history of formation of the deep basins and the recent geodynamic interactions between interfering microplates. Among the most conspicuous morphologic features of the basin is an arc-shape, elongated and wide, bathymetric swell bisecting the entire basin from the Ionian to Levantine areas, known as the Mediterranean Ridge. During the last decade this tectono-sedimentary accretionary prism, which results from the Hellenic subduction, has been intensively surveyed by swath mapping, multichannel seismic profiling and deep dives. We present here, and briefly discuss, the main morphological characteristics of this feature as derived from swath bathymetric data that considerably help to better assess the lateral and north–south morphostructural variability of the Mediterranean Ridge. This study reveals that the characteristics and morphostructural variability of the Mediterranean Ridge are related to: (1) a specific incipient collision geodynamic setting south of Crete, where the African and Aegean continental margins are nearly in contact, (2) a unique regional kinematics, controlled by frontal convergence south of Crete (central Mediterranean Ridge) and oblique subduction with opposite sense of shear for the western (Ionian) and eastern (Levantine) domains of the Mediterranean Ridge, that explain the lateral variations of deformation and (3) particularities of its sedimentary cover, which includes massive salt layers within the outer Mediterranean Ridge and local salt deposits within the inner domains, that control the north–south morphostructural variability of the sedimentary wedge.     

A 44-year high-resolution ocean and atmospheric hindcast for the Mediterranean Basin developed within the HIPOCAS Project

A set of 44-year (1958–2001) homogeneous and high-resolution hindcasts of atmospheric, sea level residuals, and wave states was performed for the Mediterranean Basin within the framework of the HIPOCAS European Project. To this aim, different numerical models were used. As a first step, a Mediterranean high-resolution atmospheric database, suitable to provide realistic and homogeneous forcing for ocean hindcast runs was generated. The HIPOCAS atmospheric database was created by means of dynamical downscaling from the global reanalysis NCEP, using for that the limited area model SN-REMO along with a spectral nudging technique. In a second stage, different Mediterranean oceanic hindcasts were performed. On one hand a long-term database of sea state over the western Mediterranean was generated by means of the wave model WAM and on the other hand a sea level residual database containing storm surge events was obtained from a long-term integration of the HAMSOM model over the entire basin. The three different hindcast runs have been exhaustively validated. On that score, various simulated parameters have been compared to both satellite and in situ measurements. Such comparisons provide a measure of the skills of the different simulated fields to realistically reproduce the observed features. Once these skills are evaluated, a study of the ocean and atmospheric climate trends as well as the interannual variability for the whole 44-year period was carried out with the hindcasted data. The reliability of the data as shown by its comparison to measurements and a proven temporal homogeneity over the 44 years of simulation make the Mediterranean HIPOCAS ocean–atmosphere hindcasted database a useful tool for studies focused on regional climatic variability, as well as for further applications in coastal and environmental decision processes in the Mediterranean area.     

Absolute Sea Level Surface Modeling for the Mediterranean from Satellite Altimeter and Tide Gauge Measurements

Changes in the height of the ocean can be described through the relative and absolute sea level changes depending on the geodetic reference the sea level records are related to. Satellite altimetry provides absolute sea level (ASL) measurements related to the global geodetic reference, whereas tide gauges provide relative sea level (RSL) measurements related to the adjacent land. This study aims at computing the ASL surfaces for different time epochs from combined satellite altimeter and tide gauge records. A method of sea level data fusion is proposed to enable modeling of the impact of present and future sea level changes on the coast. Sea surface modeling was investigated for ten different gridding methods commonly used for the interpolation of altimeter data over the open ocean and extrapolation over the coastal zones. The performance of gridding methods was assessed based on the comparison of the gridded altimeter data and corrected tide gauge measurements. Finally, the sea level surfaces related to the GRS80 global reference ellipsoid were computed for the Mediterranean Sea over the altimeter period. In addition, the current sea level trends were estimated from both sea level measurements.     

Investigation on the Cyclonic Seastate along Southeast Coast of India

The east coast of the Indian Peninsula experiences the effects of a devastating cyclone at least annually. The Thane cyclone of 29–30 December 2011 has been once such event that resulted in significant damages along the coastline of Tamil Nadu on the southeast coast of India (13° 9′ 10′ N and 80° 21′E). Waves as high as 8–12 m in a water depth of 20 m have been measured. Such huge waves, combined with a storm surge of 0.5 m, lead to severe damages to coastal structures during the passage of the cyclone. As a part of an exercise in assessing the sediment transport rates through measurements of the hydrodynamic driving parameters along the coast of major port of Chennai instruments were deployed for the measurement of waves and flow field. The measurement campaign was carried out at a location of about 120 km north of the cyclone made landfall. The ENCEP wind data formed the input for executing the WAM model for the simulation of wave characteristics, which are compared with the measured wave data. The agreement between them is found to be good. The details of the analysis of the results are presented and discussed in this paper.     

Ku– and Ka-band Altimeter Data in the Northwestern Mediterranean Sea: Impact on the Observation of the Coastal Ocean Variability

The strong increase in altimeter measurement errors near land surfaces is a limiting factor for coastal applications. We analyze the performance of the new Ka-band SARAL/AltiKa (SRL) mission in the northwestern Mediterranean Sea. SRL sea surface height (SSH) measurements are compared with those from the Jason-2 Ku-band satellite mission. The results show a significant increase in both quantity and quality of SSH data available near coastlines when using SRL data. Available edited data are 95.1% of SRL compared with 88.6% for Jason-2. Closer than 10 km to the coastline, available SRL data are still about 60% and only about 31% for Jason-2. Comparisons of the altimeter sea level variations are made with available coastal tide gauge data. The differences obtained between altimeter and tide gauge SLA time series are reduced for SRL (3.3 cm in average) compared with Jason-2 (4.2 cm in average), especially closer than 30 km to the land. It results in higher correlations (by 30%) obtained with SRL data. The coastal circulation derived from altimetry using SRL data shows an offshore meandering, which is more stable in time and with larger velocities close to the coast than that derived from Jason-2 observations.     

Assessment of a NEMO-based downscaling experiment for the North-Western Mediterranean region: Impacts on the Northern Current and comparison with ADCP data and altimetry products

The aim of this paper is to assess the impact of numerical resolution on the simulation of the circulation in the North-Western Mediterranean Sea by comparing two realistic model configurations of 1/64° and 1/16°, the low resolution configuration (LRC) being also used at the high resolution configuration (HRC) open boundaries. The study mainly focuses on the Northern Current (NC), the major feature of the regional circulation in the area, influencing important processes such as meanders giving birth to eddies and NC intrusions on the shelf, strongly conditioning the interactions between coastal and off-shore waters. Both configurations use the NEMO code with the LRC covering the entire Mediterranean basin and the HRC being restricted to the North-Western Mediterranean Sea. The two numerical configurations are assessed by using hull-mounted ADCP data and geostrophic velocities derived from AVISO altimetry at key locations along the NC path. The two configurations develop a different solution regarding the current dynamics but both indicate an important variability of the NC position along its general path. The LRC simulations systematically exhibit a NC shifted too far off the coast and also spuriously displaced seaward along the Gulf of Lions shelf edge while high resolution simulations better fit the remote and in situ observations. In addition, the HRC is able to simulate more realistic coastal features such as a confined coastal jet in good agreement with the ADCP measurements. As satisfactory agreement is reached with the various observations used at different space and time scales, the development of this NEMO high resolution configuration stands as a promising experiment for various process studies or operational oriented applications.     

Study of the fauna inhabiting the holdfasts of Laminaria hyperborea (gunn.) fosl. along some environmental and geographical gradients

A survey of the holdfast fauna of Laminaria hyperborea was carried out at thirty-five sites around the UK, mostly along the North Sea and south coasts.Data from different age classes of holdfast from a polluted and unpolluted site indicate that volume of holdfast space is a most important measurement of sample size, a minimum size of sample being one litre and, preferably, three.Gradients of increased heavy metals were defined down the North Sea and west coasts and, by utilising measurements of kelp penetration, water clarity gradients were determined as increasing northwards on the west coast and both north and southwards on the North Sea coast from a point near Tyne and Wear county. Analysis of holdfast fauna showed numerous gradients of total numbers, species and diversity which correlate closely with the heavy metal and water clarity gradients, or with undetermined parameters analogous to latitude and longitude. Where there were increases of heavy metals or decreases of water clarity, various reciprocal relationships between suspension feeders and all other trophic groups were commonly observed. In the North Sea numbers of suspension feeders increased while numbers of all other trophic groups declined. On the west coast a heavy metal increase correlated with a decreasing species richness of all trophic categories except suspension feeders, while with total numbers only suspension feeders showed an increase. On the south coast transect neither gradient existed, and only here did all trophic categories covary, except at one very polluted site where the same reciprocal relationship was again indicated.In terms of species similarity the North Sea showed a greater pool of common species than occurred between sites of other regions and between North Sea sites with other regions, despite the widest range of heavy metal levels and wate clarity that existed there. Between-site similarity appeared to be much more dependent on geographical proximity than on the two measured environmental factors. It is suggested that effects of clarity-reduction can be measured by trophic analysis more successfully than by species presence or absence, and that changes of holdfast fauna along the North Sea coast are due largely to pollution.     

Determination of Mesoscale Surface Currents in Shallow-Water Regions According to the Data of High-Frequency Radar Measurements

We propose a new method for the evaluation of the velocities of surface currents according to the data of measurements carried out by using high-frequency land-based radars. The method is based on the representation of the velocity fields via two scalar potentials, expansion of these potentials in series in basis functions, and determination of the coefficients of expansion according to the data of radar measurements as solutions of the corresponding variational problems. The errors of the procedure of determination of the coefficients of expansion are removed by using a special regularization procedure based on information theory. The proposed method enables one to fill gaps in the space and time series of radar measurements. We illustrate the method by an example of numerical analysis of mesoscale and submesoscale (10–50 km) surface currents in the Monterey Bay (California, USA) performed on the basis of the data of radar measurements carried out in August 1994. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 24–36, March–April, 2005.     

Drag-type in-situ acoustic measurement system: Design,operation, and experimental results

The Drag-type In-Situ Acoustic Measurement System (DISAMS) is a new instrument designed for rapid measurement of seabed sediment acoustic parameters, including the sediment sound velocity and acoustic attenuation coefficient. The DISAMS consists of six independent acoustic probes arranged symmetrically such that each side has one transmitting probe and two receiving probes. The entire operation is controlled and monitored in real time by a deck control unit on board, and the center frequency of the DISAMS is 30?kHz. The DISAMS can record full waveforms to determine the sound velocity and attenuation coefficient in the seabed sediment. In addition to site measurements, the DISAMS can also carry out towing measurements, resulting in improved efficiency compared with existing in-situ acoustic measurement systems. This article presents the configuration, electronics, and tests of the DISAMS in detail. Laboratory tests were conducted in a sediment pool, sea trials were carried out in the Zhoushan Islands, and sound velocity and attenuation coefficient data were obtained. The test results demonstrated that the DISAMS performed well and was able to measure the sound velocity and attenuation coefficient rapidly and accurately in both site measurements and towing measurements.     

Benthic foraminifera and their response to hydrography,periodic hypoxic conditions and primary production in the Koljö fjord on the Swedish west coast

The Koljö fjord on the Swedish west coast is a silled fjord characterised by strong stratification and stagnant bottom water, with periodically occurring hypoxic or anoxic conditions. In the Koljö fjord, renewal of the deep water generally occurs during winter. This study investigates how living benthic foraminifera react to hydrographic variations, periodic oxygen deficiency and variations in primary production. A series of monthly hydrographic measurements was made from August 1993 to December 1994, combined with sediment sampling along a (12–43 m) depth transect at five different sites. Monthly values of surface chlorophyll-a were available. Two periods of hypoxia to anoxia with one intervening period of oxic conditions, together with two autumn phytoplankton blooms and a spring phytoplankton bloom, made it possible to achieve the aims of this study. Below the pycnocline, three foraminiferal species: Elphidium excavatum clavatum, Elphidium incertum and Elphidium magellanicum represented more than 95% of the fauna. When oxygen content was very low, the foraminiferal fauna decreased but did not die out completely. A deep-water inflow in January 1994 caused the oxygen content to rise, but the foraminiferal population did not start to grow until three months later when the spring phytoplankton bloom sedimented out. Under oxic conditions, food availability seemed to limit the foraminiferal population. In itself, a very high organic content in the sediments does not seem to be a suitable food source; it is more likely that fresh phytoplankton is a potent food for these foraminifera. Reproduction of E. excavatum clavatum and E. incertum seems to have been triggered by increased food supply and sudden fluctuations in hydrographic variables. These foraminifera appear to grow from juvenile to adult in less than a month.     

Three-dimensional experiments on landslide generated waves at a sloping coast

This paper describes new three dimensional experiments on water waves generated by landslides. The landslide is reproduced by a rigid elliptical body, sliding along an inclined plane (slope of 1/3, 1 vertical, 3 horizontal). The generated water waves are free to propagate both offshore and alongshore, since the plan dimensions of the used wave tank are of at least one order of magnitude larger than the width of the landslide, which can be considered to be a scale of the wave length. The experimental study has been carried out reproducing both subaerial and partially submerged landslides. The wave generation process is studied by means of video records of the near field flow and measurement of the landslide movement; the properties of the waves propagating along the coast are described on the basis of runup gauges. The waves observed during the experiments always present first a crest and then a trough; as the first wave propagates away from the generation area the crest tends to become smaller than the trough and the maximum runup along the coast is given by the second or by the third wave. An important feature is that the observed runup along the coast firstly grows with the distance from the generation area, it reaches a maximum value at about two times the width of the landslide, and then decreases. An estimate of the celerity at which the waves propagate along the coast is given on the basis of gauge measurements; it results that the crests propagate faster than the troughs, and the wave period increases.     

Comparison and Combination of Coastal and Off-Shore Tide Gauge Measurements from Eivissa Island,Western Mediterranean

Two sea-level records, spanning eight months of simultaneous data in 2002, have been derived from pressure tide gauge measurements at Sant Antoni harbor (Eivissa Island, Western Mediterranean) and off Es Vedrà island, 15 km SW from Sant Antoni. The two time series are compared and used to characterize the sea-level variability in the Balearic Sea. The main forcings for the observed variations, astronomic tides, and meteorologic forcing by the inverse barometer effect are quantified. In a further step, an amplitude transfer function is determined, reflecting the frequency dependent amplification or damping of the nontidal sea-level residuals between both locations due to their local topography. The interpretation of the obtained transfer function indicates sea-level modulating topographic specifics not only for the coastal record at Sant Antoni, but also at the Es Vedrà site. In general, the application of such a transfer function allows the prediction of off-shore sea-level variations from coastal tide gauge measurements. In the present study, ellipsoidal sea-surface heights for Es Vedrà are inferred from Sant Antoni tide gauge data with an accuracy of about 1.5 cm by applying the determined transfer function and a geoid model.