Environmental impact and remediation of acid mine drainage: a management problem

 Work carried out at the abandoned copper (Cu) and sulphur (S) mine at Avoca (south east Ireland) has shown acid mine drainage (AMD) to be a multi-factor pollutant. It affects aquatic ecosystems by a number of direct and indirect pathways. Major impact areas are rivers, lakes, estuaries and coastal waters, although AMD affects different aquatic ecosystems in different ways. Due to its complexity, the impact of AMD is difficult to quantify and predict, especially in riverine systems. Pollutional effects of AMD are complex but can be categorized as (a) metal toxicity, (b) sedimentation processes, (c) acidity, and (d) salinization. Remediation of such impacts requires a systems management approach which is outlined. A number of working procedures which have been developed to characterise AMD sites, to produce surface water quality management plans, and to remediate mine sites and AMD are all discussed. Received: 16 January 1996 · Accepted: 5 March 1996     

Hydrochemical characterization of acute acid mine drainage at Iron Duke mine, Mazowe, Zimbabwe

 Acid mine drainage (AMD) with a minimum pH of 0.52 was recorded at Iron Duke mine near Mazowe, Zimbabwe during an investigation of the environmental geochemistry of mine waters in the Greenstone Belts of Zimbabwe. Hydrochemical data for waters emanating from the Iron Duke waste-rock pile indicate their super-saturation with respect to Fe and SO₄ ^2–. Extremely high dissolved concentrations of Al, Zn, Cu, Co, Ni, V, Cr, Cd and As also prevail. Substantial losses of metals from solution occur within 400 m of the AMD source through the precipitation of crystalline sulphates, principally melanterite. Further downstream, hydrous oxide precipitation forms the dominant mechanism of metal attenuation in waters characteristically under-saturated with respect to Fe sulphates. Speciation and saturation index data generated using the equilibrium model WATEQ4F, suggest that such codes have broad utility for generic prediction of the mineralogical contraints on metal mobility in acute AMD systems. Major discrepancies between modelled and empirical hydrochemistries are, however, evident for super-saturated waters in which the kinetics of Fe precipitation are slow, and in which total ionic strengths markedly exceed their theoretical maximum. Received: 28 August 1998 · Accepted: 7 December 1998     

Sampling riverine sediments impacted by acid mine drainage: problems and solutions

 Sampling acid mine drainage (AMD) or natural acid rock drainage (ARD)-impacted sediments is complex, requiring appropriate field sampling techniques to ensure representative samples that are both repeatable and reproducible. The important factors affecting sampling of riverine sediments are examined. These include sample site location, field observations, representative sampling, sample collection techniques, and sample preservation. A recommended sampling and processing protocol is presented for AMD- and ARD-impacted riverine sediments, which includes sediment sampling, Fe hydroxide floc sampling, chemical analysis, interstitial (pore) water collection, sediment elutriates, sediment fractionation, and physical analysis. The importance of bioassay testing is discussed, as is quality assurance and assessment approaches to define sediment quality criteria. Received: 18 September 1995 · Accepted: 23 October 1995     

Geochemical modeling of coal mine drainage, Summit County, Ohio

 Geochemical modeling was used to investigate downstream changes in coal mine drainage at Silver Creek Metro-park, Summit County, Ohio. A simple mixing model identified the components that are undergoing conservative transport (Cl^–, PO₄ ^3–, Ca²⁺, K⁺, Mg²⁺ and Na⁺) and those undergoing reactive transport (DO, HCO₃ ^–, SO₄ ^2–, Fe²⁺, Mn²⁺ and Si). Fe²⁺ is removed by precipitation of amorphous iron-hydroxide. Mn²⁺ are removed along with Fe²⁺ by adsorption onto surfaces of iron-hydroxides. DO increases downstream due to absorption from the atmosphere. The HCO₃ ^– concentration increases downstream as a result of oxidation of organic material. The rate of Fe²⁺ removal from the mine drainage was estimated from the linear relationship between Fe⁺² concentration and downstream distance to be 0.126 mg/s. Results of this study can be used to improve the design of aerobic wetlands used to treat acid mine drainage. Received: 4 June 1996 · Accepted: 17 September 1996     

Mineralogical constraints on the determination of neutralization potential and prediction of acid mine drainage

 Acid-base accounting tests, commonly used as a screening tool in acid mine drainage (AMD) predictions, have limitations in (1) measuring with confidence the amount of neutralizers present in samples and (2) affording an interpretation of what the test results mean in terms of predicting the occurrence of acid mine drainage. Aside from the analytical difficulties inherent to the conventional methods, a potential source of error in neutralization potential (NP) measurements is the contribution from the dissolution of non-carbonate minerals. Non-carbonate alkalinity measured during static tests may or may not be available to neutralize acidity produced in the field. In order to assess the value-added of extending the NP with the knowledge of mineralogical composition and evaluate potential sources of errors in NP measurements, a suite of samples were examined and characterized in terms of their mineralogical and chemical compositions. The results indicate that although the acid-base accounting tests work well for simple compositions, the tests may result in overestimation or underestimation of NP values for field samples. Mineralogical constraint diagrams relating NP determinations to Ca, Mg and CO₂ concentrations were developed with the purpose to serve as supplementary guides to conventional static tests in identifying possible NP contributions from non-carbonate minerals and checking the quality of the chemical testing results. Mineralogical NP makes it possible to interpret the meaning of NP results and to assess the behaviour of samples over time by predicting the onset of AMD and calculating NP values for individual size fractions. Received: 1 June 1998 · Accepted: 6 October 1998     

Acid mine drainage at a coal mine in the eastern Transvaal, South Africa

 Several mines in the Witbank coalfield in South Africa are affected by acid mine drainage. This has led to a deterioration in the water quality in many surface streams. The Loubert Mine is one such mine. Hence, an initial investigation was carried out to determine the source of acid mine drainage pollution and the associated hydrogeological conditions. The investigation showed that most of the acid mine drainage is emanating from old opencast workings which have been backfilled. Most of the water from the backfilled area drains into control reservoirs. Unfortunately their capacity is limited, which means that water overspills and seeps from them. This water finds its way into a nearby stream, the water of which accordingly has an unacceptably low pH value and high sulphate content. The proposals advanced to control the problem basically involve inhibiting the amount of water infiltrating the backfilled opencast area on the one hand and reducing the amount of water entering the control reservoirs on the other. Received: 5 March 1997 · Accepted: 17 June 1997     

The potential formation of acid mine drainage in pyrite-bearing hard-coal tailings under water-saturated conditions: an experimental approach

 Annually, an amount of approximately 13 million cubic meters of hard-coal tailings must be disposed of in the German Ruhr Valley. Besides the waste of land in a densily populated region, the disposal of the pyrite-bearing material under atmospheric conditions may lead to the formation of acid mine drainage (AMD). Therefore, alternative disposal opportunities are of increasing importance, one of which being the use of tailings under water-saturated conditions, such as in backfilling of abandoned gravel pits or in the construction of waterways. In this case, the oxidation of pyrite, and hence the formation of AMD, is controlled by the amount of oxygen dissolved in the pore water of tailings deposited under water. In case the advective percolation of water is suppressed by sufficient compaction of the tailings, oxygen transport can be reduced to diffusive processes, which are limited by the diffusive flux of dissolved oxygen in equilibrium with the atmospheric pO₂. Calculations of the duration of pyrite oxidation based on laboratory experiments have shown that the reduction of oxygen is mainly controlled by the content of organic substance rather than the pyrite content, a fact that is supported by results from oxidation experiments with nitrate. A "worst case" study has lead to the result that the complete oxidation of a 1.5-m layer of hard-coal tailings deposited under water-saturated conditions would take as much as several hundred thousand years. Received: 6 May 1996 · Accepted: 2 August 1996     

Radiocarbon-dated ferricrete provides a record of natural acid rock drainage and paleoclimatic changes

 Ancient deposits of ferricrete (stratified iron oxyhydroxide or clastic sediment cemented by stratified iron oxyhydroxide) are present in headwater streams draining an historic mining district in the Rocky Mountains, USA. These deposits, which form under conditions of low pH and high metal concentrations, are present in streams draining many other mineralized areas. Radiocarbon dating of wood fragments entombed within the ferricrete indicates dates of deposition as old as 8840±50 years before present (b.p.). The ferricrete deposits provide evidence that natural, metal-rich acid rock drainage has been occurring in this mineralized region for thousands of years, due to the weathering and oxidation of exposed or near-surface massive sulfide ore deposits. The dating and chemical composition of the ferricrete deposits have applications to the environmental remediation of historic mining sites and to environmental issues related to natural background chemistry. In addition, the radiocarbon dates of the ferricrete deposits correlate closely with warm–wet periods in the Holocene record, showing that ferricrete deposits may represent a previously untapped source of paleoclimatic information. Received: 6 October 1997 · Accepted: 23 March 1998     

Field assessment of acid mine drainage contamination in surface and ground water

Both sulfate and conductivity are useful indicators of acid mine drainage (AMD) contamination. Unlike pH, they are both extremely sensitive to AMD even where large dilutions have occurred. The advantage of using sulfate to trace AMD is that unlike other ions it is not removed to any great extent by sorption or precipitation processes, being unaffected by fluctuations in pH. These two parameters are also closely associated as would be expected, as conductivity is especially sensitive to sulfate ions. Therefore, as sulfate analysis is difficult in the field, conductivity can be used to predict sulfate concentration in both AMD and contaminated surface waters using regression analysis. Most accurate predictions are achieved by using equations given for specific conductivity ranges or AMD sources. There is also potential to use conductivity to predict approximate concentrations of key metals when the pH of the water is within their respective solubility ranges.     

A mass balance approach to estimate the dilution and removal of the pollutants in stream water polluted by acid mine drainage

 A few simple mass balance equations were developed to simultaneously estimate how much the pollutants from acid mine drainage (AMD) in stream water are diluted and removed during their migration. The application of the equations requires knowledge of the variations in the concentrations of the dissolved pollutants and the stoichiometry of the precipitation reaction of the pollutants when none of the pollutant shows a conservative behavior along the stream path. The calculation should be restricted to the pollutants showing much higher concentrations in the polluted main stream water than in the combining or diluting water of the same target area. The mass balance equations were applied to estimate the dilution factor and precipitation fractions of pollutants in Imgok Creek such as Fe, SO₄ and Al from the AMD of Yeongdong mine. The results show that the estimation, especially for SO₄ and Al, significantly depends on the kinds of the precipitates. When FeOHSO₄ and AlOHSO₄ are assumed to precipitate, the maximum removal fractions of SO₄ and Al by precipitation are respectively 34% and 46% of the original input, which is much higher than the values estimated when SO₄ is considered to be perfectly conservative. It indicates that the stoichiometry of precipitation reaction is very important in the interpretation of the pollutant dilution and migration and assessment of environmental impacts of AMD. The applicability of the mass balance equations may still need to be verified. However, examining the calculated dilution factor and precipitation fractions with the equations can provide invaluable information on not only the behavior but also unexpected input of the pollutants in the stream water polluted by AMD and other point sources. Received: 12 November 1997 · Accepted: 30 March 1998     

Some problems associated with past mining at a mine in the Witbank coalfield, South Africa

 Mining in the Witbank Coalfield commenced at the turn of the century. Initially there was little environmental degradation associated with mining activities; however, in the late 1930s and early 1940s a pillar-robbing programme commenced. At one particular mine this has had marked effects on the environment. Primary effects include subsidence, the appearance of tension cracks at the surface and crownhole development. Secondary effects include spontaneous combustion of the coal worked, as air has been provided with ready access to the mine, accelerated subsidence due to the strength of many pillars being reduced by burning, and a marked deterioration in groundwater quality in the area. Spoil heaps also form blemishes on the landscape. These contain significant amounts of coal and have undergone spontaneous combustion. The deterioration in the water quality has led to the decimation of vegetation in some areas and the eradication of aquatic flora and fauna in a nearby stream. Received: 5 March 1997 · Accepted: 1 July 1997     

Hydrogeochemical characteristics of acid mine drainage in the vicinity of an abandoned mine, Daduk Creek, Korea

Acid mine drainage discharged from the abandoned Daduk mine towards the Daduk creek has a pH of 3.3, and concentrations of Al, Mn, Fe, Zn and SO₄ of 18, 41, 45, 38 and 1940 mg/L, respectively. In particular, As concentration in acid mine drainage is 1000 μg/L. Removing order of metal ions normalized by SO₄ concentration downstream from discharge point is Fe > As > Al > Cu > Zn > Mn > Cd > Pb. In the Daduk creek, Fe and As are the most rapidly depleted downstream from acid mine drainage because As adsorbs, coprecipitates and forms compounds with ferric oxyhydroxide. From the results of geochemical modeling using the Phreeq C program, goethite (FeOOH) is oversaturated, and schwertmannite (Fe₈O₈(OH)_4.5(SO₄)_1.75) is the most stable solid phase at low pH in the Daduk creek. Yellowish red (orange ochre) precipitates that occurred in the study area are probably composed of goethite or schwertmannite.     

Heavy metal geochemistry of the acid mine drainage discharged from the Hejiacun uranium mine in central Hunan,China

The acid mine drainage (AMD) discharged from the Hejiacun uranium mine in central Hunan (China) was sampled and analyzed using ICP-MS techniques. The analyzing results show that the AMD is characterized by the major ions Fe_Total, Mn, Al and Si, and is concentrated with heavy metals and metalloids including Cd, Co, Ni, Zn, U, Cu, Pb, Tl, V, Cr, Se, As and Sb. During the AMD flowing downstream, the dissolved heavy metals were removed from the AMD waters through adsorption onto and co-precipitation with metal-oxhydroxides coated on the streambed. Among these metals, Cd, Co, Ni, Zn, U, Cu, Pb and Tl are negatively correlated to pH values, and positively correlated to major ions Fe, Al, Si, Mn, Mg, Ca and K. The metals/metalloids V, Cr, Se, As and Sb are conservative in the AMD solution, and negatively-correlated to major ions Na, Ca and Mg. Due to the above different behaviors of these chemical elements, the pH-negatively related metals (PM) and the conservative metals (CM) are identified; the PM metals include Cd, Co, Ni, Zn, U, Cu, Pb and Tl, and the CM metals V, Cr, Se, As and Sb. Based on understanding the geochemistry of PM and CM metals in the AMD waters, a new equation: EXT = (Acidity + PM)/pH + CM × pH, is proposed to estimate and evaluate extent of heavy-metal pollution (EXT) of AMD. The evaluation results show that the AMD and surface waters of the mine area have high EXT values, and they could be the potential source of heavy-metal contamination of the surrounding environment. Therefore, it is suggested that both the AMD and surface waters should be treated before they are drained out of the mine district, for which the traditional dilution and neutralization methods can be applied to remove the PM metals from the AMD waters, and new techniques through reducing the pH value of the downstream AMD waters should be developed for removal of the CM metals.     

Renovation of a failed constructed wetland treating acid mine drainage

 Acid mine drainage (AMD) from abandoned underground mines significantly impairs water quality in the Jones Branch watershed in McCreary Co., Kentucky, USA. A 1022-m² surface-flow wetland was constructed in 1989 to reduce the AMD effects, however, the system failed after six months due to insufficient utilization of the treatment area, inadequate alkalinity production and metal overloading. In an attempt to improve treatment efficiencies, a renovation project was designed incorporating two anoxic limestone drains (ALDs) and a series of anaerobic subsurface drains that promote vertical flow of mine water through a successive alkalinity producing system (SAPS) of limestone beds overlain by organic compost. Analytical results from the 19-month post-renovation period are very encouraging. Mean iron concentrations have decreased from 787 to 39 mg l^–1, pH increased from 3.38 to 6.46 and acidity has been reduced from 2244 to 199 mg l^–1 (CaCO₃ equivalent). Mass removal rates averaged 98% for Al, 95% for Fe, 94% for acidity, 55% for sulfate and 49% for Mn during the study period. The results indicate that increased alkalinity production from limestone dissolution and longer residence time have contributed to sufficient buffering and metal retention. The combination of ALDs and SAPS technologies used in the renovation and the sequence in which they were implemented within the wetland system proved to be an adequate and very promising design for the treatment of this and other sources of high metal load AMD. Received: 29 June 1998 · Accepted: 15 September 1998     

Prediction of acid mine drainage generation potential in selected mines in the Ashanti Metallogenic Belt using static geochemical methods

Acid mine/rock drainage (AMD/ARD) is the biggest environmental threat facing the mining industry. This study investigates AMD/ARD possibilities in three mines in the Ashanti Belt, using acid base accounting (ABA) and net acid generation pH (NAGpH) tests. Twenty-eight samples of rock units and mine spoil from these mines were collected for ABA and NAGpH tests. Two tailing dumps at Prestea and Nsuta were confirmed by both methods as acid generating with NAGpH of 4.5 and 4.6 and neutralization potential ratio values of 4.38 and 4.60, respectively. Six other samples are classified as potentially acid generating using a variety of established classification criteria. The rest of the samples either exhibited very low sulphur and carbonate content or had excess carbonate over sulphur. Consistency between results from ABA and NAGpH tests validates these tests as adequate tools for preliminary evaluation of AMD/ARD possibilities in any mining project in the Ashanti Belt.     

Acid mine drainage and acid rock drainage processes in the environment of Herrerías Mine (Iberian Pyrite Belt, Huelva-Spain) and impact on the Andevalo Dam

The present work describes the process of acid water discharge into the Andévalo Dam (Iberian Pyrite Belt, Huelva-Spain) starting from the interpretation of rainfall data and chemical analyses regarding pH, conductivity, metal and sulphate content in water, from a time series corresponding to the sampling of two confluent channels that discharge water into the referred dam. Statistical data treatment allows us to conclude the existence of acid mine drainage processes in the Chorrito Stream, which are translated into very low pH values and high sulphate and metal concentrations in the water coming from Herrerías Mine. On the other hand, the Higuereta Stream shows, for the same parameters, much lower values that can be interpreted as the channel response to acid rock drainage processes in its drainage basin induced by the rocky outcrops of the Iberian Pyrite Belt.     

Hydrogeochemical characteristics of acid mine drainage and water pollution at Makum Coalfield,India

Acid mine drainage (AMD) is one of the severe environmental problems that coal mines are facing. Generation of AMD in the northeastern part of India due to the coal mining activities has long been reported. However detailed geochemical characterization of AMD and its impact on water quality of various creeks, river and groundwater in the area has never been reported. Coal and coal measure rocks in the study area show finely disseminated pyrite crystals. Secondary solid phases, resulted due to oxidation of pyrite, occur on the surface of coal, and are mainly consisting of hydrated sulphate complexes of Fe and Mg (copiapite group of minerals). The direct mine discharges are highly acidic (up to pH 2.3) to alkaline (up to pH 7.6) in nature with high concentration of SO₄²⁻. Acidic discharges are highly enriched with Fe, Al, Mn, Ni, Pb and Cd, while Cr, Cu, Zn and Co are below their maximum permissible limit in most mine discharges. Creeks that carrying the direct mine discharges are highly contaminated; whereas major rivers are not much impacted by AMD. Ground water close to the collieries and AMD affected creeks are highly contaminated by Mn, Fe and Pb. Through geochemical modeling, it is inferred that jarosite is stable at pH less than 2.5, schwertmannite at pH less than 4.5, ferrihydrite above 5.8 and goethite is stable over wide range of pH, from highly acidic to alkaline condition.     

The potential use of serpentinite in the passive treatment of acid mine drainage: batch experiments

The efficiency of serpentinite as an alternative alkalinity generating material for the passive treatment of acid mine drainage (AMD) was assessed in the laboratory. Three series of batch experiments were designed for the passive treatment of a low pH (1.6) AMD synthetic solution containing 2,500 ppm Fe²⁺, 6,600 ppm SO₄^2–, 10.5 ppm Al, 15 ppm Ni, and traces of Cr, Mn and Cu. The influencing factors studied were: the effect of water/rock ratio, residence time, type of the alkalinity generating material (dolomite, magnesite, marble, serpentinite), and nature of the system (open vs. closed cells). The variations in solution chemistry observed in the open cells indicate that a lower water/rock ratio (0.33 ml/g) was the most efficient for metals removal. The optimal residence time in open cells was 24 h to reach the higher pH values. In the closed cells laboratory setup, synthetic AMD was placed in contact with the various alkaline materials for three different contact times (24, 48, 72 h). The optimal pH was reached after 48 h and did not change appreciably for longer contact time, and the best results for metal removals were obtained with marble and serpentinite. Single treatment efficiency was compared with a successive treatment approach. The most promising results were obtained with a five step treatment: (1) pre-treatment in a closed cell using serpentinite, (2) aeration and settling, (3) treatment in an open cell using marble, (4) final aeration and settling, and (5) filtration with a coarse silica sand. With this configuration, the final pH was 6.5 and pronounced metals depletion was achieved (100% for Al, 99.95% for Fe, 85.7% for Ni).     

A comparative mineralogical and geochemical study of sulfide mine tailings at two sites in New Mexico, USA

A comparative study of sulfide mine tailings from two sites near Silver City in southwest New Mexico has shown the need for environmental monitoring in a geological context. The Cyprus-Piños Altos and Cleveland deposits consist of Cu and Zn skarn mineralization in the Piños Altos Mountains of New Mexico. Primary ore minerals in both deposits include chalcopyrite, sphalerite, and galena. The Cyprus-Piños Altos Mine ceased operation in 1995 and the Cleveland Mill closed in 1950. The deposits have similar mineralogical characteristics; however, the tailings are different in terms of age, degree of oxidation and method of disposal. The Cyprus-Piños Altos tailings (CPAT) are stored in a lined, bermed impoundment. They are dominantly water-saturated and exhibit no secondary-phase formation. The grains are not cemented and show no evidence of primary-mineral dissolution. The geochemical data show a predominantly primary signature. The tailings pond water is neutral to slightly alkaline (pH?from 7 to 8.3), partly as a result of processing methods. The Cleveland mill tailings (CMT) were deposited in a valley at the headwaters of an ephemeral stream. They are highly oxidized and differentially cemented. They have undergone numerous wet/dry cycles resulting in extensive oxidation. Secondary minerals predominate, and consist mainly of jarosite, goethite, hematite, and Fe-oxyhydroxides and -oxyhydroxysulfates. The pH of the stream draining the CMT is as high as 2.15. Maximum metal contents in the stream immediately downstream from the tailings are 5305?ppm Zn, 454?ppm Cu, 1.16?ppm Pb, 17.5?ppm Cd, 1.4?ppm As, and 0.01?ppm Hg.