冻土旁压试验与单轴试验对比

为了认识冻土旁压试验结果与常规试验结果之间的关系,在室内分别开展了冻结重塑黏土的旁压试验和单轴压缩试验,并对试验结果进行了对比分析。结果表明,在各级荷载作用下旁压曲线一般都呈现应变速率衰减的趋势,而单轴曲线在冻土破坏时会出现渐进流动阶段。旁压试验的应力-应变曲线呈现应变硬化型,而且出现初始拟弹性阶段;而单轴试验的应力-应变曲线则属于应变软化型,并在轴向应变大约为10%时达到剪应力峰值。温度相同时,旁压试验的剪切强度以及初始弹性模量都要大于单轴试验,且温度越低差值越大。     

The uniaxial compressive and tensile tests of frozen saturated clay in Shanghai area

The compressive and tensile strengths of frozen clay are important parameters for frozen wall design in artificial freezing excavation of tunnels and foundation pits. Up to now, nobody has conducted the compressive and tensile test of frozen clays in Shanghai area. In this paper, the unconfined compressive and tensile tests of frozen clay specimens drilled from the soil horizons 3–5 in Shanghai area were conducted in Zwick-Z020kN High-low Temperature Materials Testing Machine and Frozen Soil Triaxial Testing Machine, the corresponding constitutive equations were suggested; the temperature-unconfined uniaxial compressive strength relation was discussed; the strain rate–unconfined uniaxial compressive strength and strain rate–uniaxial tensile strength relations were studied. The relation between moisture content, dry density and unconfined uniaxial compressive strength was analyzed, too. In addition, the uniaxial compressive elastic modulus of Shanghai frozen clays and its influence factors were discussed. The research work of the current paper is very helpful for the design and theoretical studies of artificial freezing excavation in soft soil areas.     

An Elastic Stress–Strain Relationship for Porous Rock Under Anisotropic Stress Conditions

A stress–strain relationship within porous rock under anisotropic stress conditions is required for modeling coupled hydromechanical processes associated with a number of practical applications. In this study, a three-dimensional stress–strain relationship is proposed for porous rock under elastic and anisotropic stress conditions. This relationship is a macroscopic-scale approximation that uses a natural-strain-based Hooke’s law to describe deformation within a fraction of pores and an engineering-strain-based Hooke’s law to describe deformation within the other part. This new relationship is evaluated using data from a number of uniaxial and triaxial tests published in the literature. Based on this new stress–strain relationship, we also develop constitutive relationships among stress, strain, and related stress-dependent hydraulic/mechanical properties (such as compressibility, shear modulus, and porosity). These relationships are demonstrated to be consistent with experimental observations.     

冻结盐渍砂土单轴强度特性研究

通过对兰州盐渍砂土重塑土添加不同量的盐分来模拟不同含盐量的盐渍土, 并对其进行单轴抗压试验, 分析其在不同含盐量、不同温度及不同速率的应变加载情况下, 冻结盐渍砂土的单轴抗压强度的变化规律, 重点讨论了盐分对土体力学参数的影响以及弹性模量与含盐量、温度的关系. 结果表明: 易溶盐含量的增加会导致单轴抗压强度逐渐降低, 试验温度越低抗压强度会越大; 应变加载速率的增加会增大土体的单轴抗压强度, 同时会缩短土体达到应力峰值的时间; 土体含盐量越大弹性模量越小, 温度越低弹性模量越大.     

基于统计分析离子型稀土矿体力学参数的测点布置

基于统计分析结果合理布置测点,测试土体力学参数具有测试结果准确和经济快捷等优点。在赣南某稀土矿山非等间距布置6个测点,共计18个测试孔,通过旁压试验和钻孔剪切试验测试了离子型稀土矿体的旁压模量、变形模量、压缩模量、黏聚力和内摩擦角等力学参数,运用经典统计学方法和地质学统计方法分析矿体力学参数的空间变异性。研究结果表明:试验矿块内矿体的黏聚力和旁压模量属于强变异,黏聚力的变异系数为0.48,旁压模量的变异系数为0.36;内摩擦角属于弱变异性,其变异系数为0.067;假设由18个测试孔的测试数据计算得到各力学参数为真值,若15%为工程可接受的误差,运用经典统计学方法分析和地质统计学方法分析结果表明,对于试验矿块,在45 m范围内均匀布置5个测点,测试结果可有效估计矿块内黏聚力和旁压模量的平均值和变异系数。     

Deformation Modulus of Fly Ash Modified with Lime and Gypsum

Deformation modulus of fly ash is one of the most important mechanical properties generally used in different design problems and also as an input parameter to sophisticated numerical techniques employed to assess the response of different structures resting on fly ash fill or embankment made of fly ash. Deformation modulus is usually expressed in terms of compressive strength. This paper presents the deformation modulus of fly ash modified with lime alone or in combination with gypsum at different strain levels. The values of deformation modulus obtained from both unconfined compression test and unconsolidated undrained triaxial test results are presented herein. The specimens for unconfined compression test and for undrained triaxial tests were cured up to 90 and 28 days, respectively. The effects of addition of lime (4–10%) and gypsum (0.5 and 1.0%) on the deformation modulus of class F fly ash are highlighted. With addition of lime and gypsum, the class F fly ash achieved the deformation modulus in the range of 190 MPa in UCS test and up to 300 MPa in triaxial test specimens tested under all round pressure of 0.4 MPa. Based on the present test results empirical relationships are developed to estimate deformation modulus of modified fly ash from unconfined compressive strength and relationships between initial tangent modulus and secant modulus at different strain levels are also developed.     

水压-应力耦合作用下灰岩力学特性试验

为探究富水饱和灰岩体在水压-应力耦合作用下的力学特性，利用自主研发的可实现单轴压缩的渗透试验装置对不同水压强度下的灰岩试样进行压缩破坏试验，测试灰岩应力-应变特性，分析水压对单轴抗压强度、弹性模量、变形模量的影响，灰岩破碎特性与水压强度相关性以及孔隙变化规律。研究表明:增加的水压强度对灰岩应力-应变和强度特性有显著的影响。随着水压强度增大，应力-应变曲线的压密阶段相对延长而弹性相对缩短，峰值强度呈指数减小而弹性模量和变形模量均呈线性下降，表明水压作用显著降低了灰岩脆性。另外，灰岩弹性模量、变形模量均与峰值强度呈线性关系。增大的水压强度对灰岩宏观断裂具有显著影响而未对其破坏类型造成影响，随水压强度增加，碎块均一系数和单位质量孔隙体积均呈指数函数增加。研究成果为隧道建设中富水岩体的开挖稳定性分析提供参考。      

锦屏二级水电站大理岩复杂加卸载应力路径力学特性研究

地下洞室开挖围岩经历典型径向卸载、环向加载应力路径,由此引起的岩体强度、变形特征和破坏机制也不尽相同。针对锦屏二级水电站高地应力赋存环境,对施工排水洞大理岩开展常规单轴全应变、三轴压缩、卸围压、卸围压-加载轴压等4种不同应力路径力学试验,得到应力-应变全过程曲线、变形破坏特征和极限储能变化规律。试验研究结果表明, （1）锦屏二级水电站大理岩破坏时轴向应变一般较小,为硬脆性材料,卸荷应力路径下该脆性特征更为明显;（2）卸围压同时加载轴压试验峰值强度对应轴向应变、环向应变及体积应变值一般高于单纯的卸围压值,而对应峰值强度则一般低于卸围压值;（3）卸荷速率较大时,变形模量越大,大理岩峰值强度越低。加载速率越大,变形模量越小,峰值强度越高。初始围压越高,变形模量值越低,峰值强度越高;（4）无侧限作用时试件主要为张拉破坏,低侧限作用时为剪切破坏为主,局部存在张拉破坏,较高侧限时,剪切面为典型X或Y型;（5）岩石试件具有极限储能值,该值受多种因素的影响。一般情况下试件破坏对应围压越高,极限储能值越高,卸载速率越大,极限储能值越小。研究结果对于岩爆孕育发生机制解释以及工程实际问题的解决均有参考价值。     

攀枝花尖山矿区细中粒辉长岩力学特性试验研究

对攀枝花钒钛磁铁矿尖山矿区的细粒和中粒辉长岩进行了单轴压缩、常规三轴压缩、抗拉强度和软化等系列岩石力学试验,研究了岩石结构(矿物颗粒大小)、水和围压等因素对岩石强度和变形特性的影响。结果表明,细粒辉长岩单轴抗压强度、弹性模量和压拉比均高于中粒辉长岩,但在三轴压缩情况下,两种岩石的峰值强度、残余强度和弹性模量差异较小;与中粒辉长岩相比,细粒辉长岩的峰值强度的黏聚力C较大,而峰值强度的内摩擦角φ较小;随着围压的增长,辉长岩峰值强度、残余强度与围压近似呈线性关系,剪切破坏角减小,平均模量E增长不明显,割线模量E50增长较显著;辉长岩的软化系数较高,在水的作用下弹性模量降低,泊松比升高。     

红黏土地基承载力和变形参数的空间分布特征分析

为了获得红黏土地基承载力和变形参数在横向和垂向上的定量数据及分析它们的变化规律,选取厦门至成都高速公路湖南省郴州段典型横纵断面上的红黏土地层作为试验点,采用平板载荷试验、旁压试验等技术手段进行了原位测试。试验结果表明：红黏土地基承载力和变形模量在横向较小的范围内呈现较大幅度的变化,在垂向上则呈现先增大再减小的变化趋势,与红黏土赋存厚度、地形地貌、含水率等相关;旁压试验所测得的承载力特征值和平板载荷试验测得的承载力特征值之间存在一定的差异性;旁压模量与变形模量可以通过结构性系数联系起来,所得的结构性系数与Menard根据大量黏土试验资料对比所得到的结论较为一致。     

高温周期变化与高围压作用下大理岩力学特性试验研究

为了探讨温度周期变化与高围压对大理岩变形、强度特性及破坏断裂损伤劣化的影响,采用MTS815.03电液伺服刚性岩石试验系统,选取四川凉山雅砻江大河湾锦屏二级水电站引水隧洞围岩大理岩试样分别进行不同温度变化（100～ 600 ℃）,周期次数为8次。进行高围压（60 MPa）作用下全应力应变过程三轴压缩与单轴压缩对比试验,系统分析比较了温度循环与高围压作用对大理岩应力-应变关系曲线、峰值应力、残余应力,峰值应变、残余应变以及弹性模量等的影响。试验结果表明,大理岩随着温度升高,峰值强度、残余强度、弹性模量下降,峰值应变和残余应变随之增大;在同一温度下,随着循环次数增加,其弹性模量、峰值强度、残余强度降低,温度越高,降低越明显;多次循环后,岩石的脆性变大,应力-应变曲线峰后段不再平滑,残余应变变小,其研究成果为锦屏二级水电站引水隧洞围岩稳定性分析提供理论依据。     

Deformation modulus of heavily jointed–sheared and blocky greywackes by pressuremeter tests: Numerical, experimental and empirical assessments

Deformability of rock masses influencing their behavior is an important geomechanical property for the design of rock structures. Due to the difficulties in determining the deformability of jointed rock masses at the laboratory-scale, various in-situ test methods such as pressuremeter, dilatometer, plate loading tests etc. have been developed. Although these techniques are currently the best and direct methods, they are time-consuming and expensive, and present operational difficulties. In addition, the influence of the test volume on deformation modulus depending on the method employed is also important. For these reasons empirical equations to indirectly estimate the deformation modulus have also been recommended by several investigators as an alternative approach. In this study; the geomechanical quality of weak, heavily jointed, sheared and/or blocky greywacke rock masses, on which very concentrated civil works are continuing at the southern and southwestern parts of Ankara (Turkey), was assessed. The deformation modulus was determined by pressuremeter tests, the possible effects of variables on the derived deformation modulus from the pressuremeter test were evaluated by numerical methods, and the comparisons between the deformation modulus of the greywackes obtained from the pressuremeter tests and their geomechanical quality (GSI and RMR) were made. Numerical simulations revealed that the presence of a disturbed annulus around the borehole causes underestimation of the deformation modulus, while the effect of length to diameter ratio of the pressuremeter probe on the deformation modulus is minor. Based on the geo-engineering characterization assessments, mainly two greywacke rock masses with different geomechanical qualities were identified. Geotechnical quality of one of these rock masses was verified by the back analysis of two slope failures. The empirical equations to indirectly estimate the deformation modulus of the greywackes using their GSI and RMR values yielded high coefficients of correlation.     

Deformation of a rock in different tensile tests

Strength and deformation of a typical homogeneous sandstone under tensile stresses, have been studied in the laboratory, using standard tensile tests, viz. uniaxial tension, the Brazilian and beam bending tests. In addition to the parameters such as uniaxial tensile strength, modulus of deformation in tension and Poisson's ratio in tension obtained directly by the uniaxial tension test, the Brazilian tensile strength, the modulus and Poisson's ratio have also been determined by the Brazilian test. Bending tensile strength has been obtained by the beam bending test using the four-point loading system and the tensile modulus of elasticity has been estimated from the observations of beam bending and uniaxial compression tests, using “double elasticity” relationships.The rock under high tensile stresses is found to be much less “stiffer” than under high compressive stresses and is therefore likely to result in a relatively less violent tensile failure. The nature of the tensile deformation in the region of maximum tensile stress is found to be strikingly similar in all the three tensile tests under study. Although the initial, the 50% and the final tensile modulus values differ in each tensile test, the general trend of the tensile modulus with increasing stress is found similar in all these tensile tests.     

Assessments of Strength Anisotropy and Deformation Behavior of Banded Amphibolite Rocks

Assessment of strength anisotropy in transversely isotropic rocks has been one of the most challenging subjects in rock engineering. However, far too little attention has been paid to banded amphibolite rocks. This study aim to evaluate strength and deformation anisotropy behavior of banded amphibolite rocks. The dynamic mechanical tests including ultrasonic pulse test, uniaxial compressive strength, Brazilian test and deformability test were performed on drilled rock samples as a function of foliation plane angle (β = 0°, 30°, 60° and 90°). The results obtained have shown that the dynamic mechanical properties of amphibolite rocks have different values concerning banding plane. Compression and shear waves taken parallel to the foliation plane show highest values than those obtained in the other directions. Under uniaxial test, the banded amphibolite has a U-shaped anisotropy with maximum strength at β = 90° and minimum strength is obtained when β = 30°. Strength anisotropic index ranges between 0.96 and 1.47. It seems that the high range value of anisotropic index is mainly due to slight undulation of foliation planes, that being not perfectly straight. The results of elastic deformation test show that there is no clear dependence on microstructures characteristics of subtype-amphibolite rocks that controlling modulus “shape-anisotropy”. However, in this study, Young modulus values of amphibolite rocks with β follow both types of shape-anisotropy, “U-shape” and “decreased order-shaped”. Thus, this study recommended that further research be undertaken regarding the role of modulus “shape-anisotropy” within the same lithotype.     

冻融循环条件下含软弱夹层隧道围岩力学性质及破坏特征

川藏铁路沿线隧道围岩中常存在大量软弱夹层,且岩体受严寒气候影响较大。为研究夹层倾角和冻融循环对隧道围岩力学性质的影响,室内制备了不同软弱夹层倾角、不同冻融循环次数条件下的互层岩体,并对含软弱夹层岩体展开了单轴压缩试验。研究发现:（1）含软弱夹层岩体的硬岩部分变形较小,而软岩夹层部分的破坏更加剧烈。夹层倾角较小时（β=0°、30°）岩体破坏后裂纹与夹层倾角接近平行,当夹层倾角较大时岩体破裂面与夹层呈X型交叉状;冻融循环次数越多,岩体的破坏程度越强烈。（2）随着夹层倾角的增大,岩体的单轴抗压强度和弹性模量先减小后增大;当夹层倾角β=45°时,抗压强度和弹性模量最小,抗压强度较含水平软弱夹层岩体降低35.27%,弹性模量降低34.84%。（3）冻融循环劣化了夹层岩体的力学性质,岩体承载能力随着冻融循环次数的增加而减弱,但塑性变形能力有所增强。在冻融循环作用的影响下,岩体抗压强度、弹性模量呈负指数型递减,峰值点应变则呈线性增大。     

轻量砂变形及强度特性三轴试验研究

通过三轴试验系统研究了新型土工材料--轻量砂的变形及强度特性。结果表明,不同的配比、龄期使轻量砂具有不同的原生结构强度,围压使不同原生结构强度的土样处于剪胀或剪缩状态,导致发生应变硬化、应变软化以及相应状态下孔压的3种对应形态变化。变形模量随EPS（发泡聚苯乙烯）球粒掺入比的增大而线性减小,随水泥掺入比、龄期增大而线性增大,相同配比的土样变形模量与围压关系不大;三轴抗压强度随EPS球粒掺入比增大而呈负指数关系减小,随水泥掺入比、龄期、围压增大而线性增大,存在水泥掺入比阀值;土骨架转换效应对于土样强度的影响很大,造成了土体单轴、三轴抗压强度分带,高水泥掺入比能够大大弱化EPS颗粒的土骨架效应。结合前人成果,系统地研究了轻量砂密度、无侧限抗压强度的影响因素,引入材料学中比强的概念,提出了单价比强图结合配方公式的方法,对轻量土砂进行配方优化。分析了轻量土砂应力-应变关系转型问题,提出采用无侧限抗压强度来表征不同配比、龄期轻量土砂的原生结构强度。通过试验与数理统计,建立临界围压与原生结构强度的关系,为数值模拟计算与建立本构模型奠定了基础。     

上横山多层页岩矿床低强度相似材料试验模型研究

通过相似配比试验,研制不同砂胶比的低强度相似材料,分析了砂胶比和胶结材料中水泥含量对其物理和力学性质的影响及其变化规律。根据上横山多层页岩矿床赋存条件和相似模拟试验要求,确定了3个可行的、有效的相似材料配比,结合相似模拟条件构筑了多层页岩矿床相似材料模型。试验结果表明,相同砂胶比的低强度相似材料的密度、抗压强度、弹性模量和泊松比均随胶结材料中水泥含量的增加而增大;密度、孔隙率、弹性模量和泊松比在低砂胶比条件下具有更小的波动性。进一步研究发现,选择的低强度页岩相似材料实际相似常数与设计相似常数误差≤1.77%;利用数值模拟回采矿床矿柱的变形特征与相似模拟试验基本相似,应变变化幅度≤8.76%,试验模型在多层页岩矿床模型试验研究上具有一定的合理性。研究结果为有效的进行多层页岩矿床地下开采研究提供科学依据和试验基础。     

干湿循环作用下砂岩力学特性及其本构模型的神经网络模拟

基于不同干湿循环作用下砂岩单轴压缩试验结果,分析了干湿循环效应对砂岩变形、强度、破坏特征等力学特性的影响规律,认为随着干湿循环次数的增加,弹性模量及峰值强度均有降低的趋势,降低幅度先大后小,而且会以某一具体值为临界值发展变化,就本次试验而言为干湿循环20次时的抗压强度和弹性模量值;砂岩的破坏特征亦会受到干湿循环试验次数的影响,干湿次数越少,脆性破坏越明显,反之则延性特征增强,即砂岩会呈现一种从脆性到延性转化的破坏规律。以应变和干湿试验次数为输入层,应力为输出层,构建了2-12-1的三层神经网络本构模型。通过样本的学习与检验,证明该模型能较好地描述干湿循环作用下砂岩的力学性能,验证了利用神经网络方法建立岩石本构模型的可行性与可靠性。基于预测结果,建立了完整的考虑干湿循环效应的砂岩力学特性变化规律的数学函数关系式。     

岩石力学性质的应变率效应试验

以玄武岩为试样,开展了中低应变率下的岩石单轴抗压试验。本次研究分析应变率对岩石抗压强度、弹性模量、泊松比等力学参数的影响,分别提出了岩石抗压强度、弹性模量、泊松比等参数与应变率之间的拟合关系式。以峰值应力对应的应变和峰值后的软化模量为脆性评价指标,分析加载应变率对岩石脆性的影响。研究表明:(1)岩石抗压强度、弹性模量均随应变率的增加而增加。(2)岩石泊松比随应变率增加而减小。(3)随着应变率增加大,峰值应力对应的应变增大,峰值后的应变软化程度减小,岩石脆性减弱。(4)应变率对岩石抗压强度影响较大,对弹性模量和泊松比的影响较小。(5)曲线拟合效果良好,提出的拟合关系式合理。     

礁灰岩嵌岩桩的模型试验

援建马尔代夫的马累－机场岛跨海大桥项目作为我国“一带一路”的经济建设规划之一,桥梁桩基坐落于与我国南海珊瑚礁岩土体结构极为相似的珊瑚礁中。由于国内外开展珊瑚礁嵌岩桩的设计经验不足,故需要通过试验方法获取珊瑚礁嵌岩桩的承载特性和相关数据。对取自马累岛和机场岛桥基位置的礁灰岩岩芯开展室内桩基承载特性试验研究。测得礁灰岩的密度、相对密度、饱和单轴抗压强度、三轴剪切强度等基本物理力学指标,结合礁灰岩中嵌岩桩模型试验结果,获得模型桩承载力随桩端位移的变化规律。试验结果表明：桩岩界面先后经历弹性剪切、剪应力跌落和摩擦剪切3个阶段。在弹性剪切阶段,界面剪切变形以弹性变形为主,极限弹性位移 呈现出随弹性模量E增大而递减的趋势。在剪应力跌落阶段,应力软化急剧,并很快过渡到界面的摩擦剪切。通过试验发现,在低围压下,礁灰岩的残余侧摩阻力与饱和单轴抗压强度呈正相关关系。随着围压增大,残余侧摩阻力受围压影响较大。