The LITFASS project of DWD and the LITFASS-98 experiment: The project strategy and the experimental setup

Summary ?The LITFASS project (‘Lindenberg Inhomogeneous Terrain – Fluxes between Atmosphere and Surface: a Long-term Study’) of the Deutscher Wetterdienst (DWD, German Meteorological Service) aims to develop and to test a strategy for the determination and parameterisation of the area-averaged turbulent fluxes of heat, momentum, and water vapour over a heterogeneous land surface. These fluxes will be representative for an area of about 10 * 10 km² (while the typical patch size is between 10⁻¹ to 10⁰ km²) corresponding to the size of a grid cell in the present operational numerical weather prediction model of the DWD. LITFASS consists of three components: – the development of a non-hydrostatic micro-α-scale model (the LITFASS local model – LLM) with a grid-size of about 100 * 100 m², – experimental investigations of land surface – atmosphere exchange processes and boundary layer structure within a 20 * 20 km² area around the Meteorological Observatory Lindenberg, – the assimilation of a data base as an interface between measurements and modelling activities. The overall project strategy was tested over a three-week period in June 1998 during the LITFASS-98 field experiment. This paper gives an overview on the LITFASS project, on the design and measurement program of the LITFASS-98 experiment, and on the weather conditions during the period of the experiment. Conclusions are formulated for the operational realisation of the LITFASS measurement concept and for future field experiments aimed at studying the land surface – atmosphere interaction in the Lindenberg area. Selected results from both experimental and modelling activities are presented in a series of companion papers completing this special issue of the journal. Received June 18, 2001; revised March 18, 2002; accepted April 2, 2002     

Experimental determination of turbulent fluxes over the heterogeneous LITFASS area: Selected results from the LITFASS-98 experiment

Summary ?During the LITFASS-98 experiment, local flux measurements were performed over five different types of underlying surface (grass, barley, triticale, pine forest, water) in a heterogeneous landscape using eddy covariance and profile techniques over a three week time period in June, 1998. Estimates of the area-integrated sensible heat flux during daytime were obtained from continuous measurements with a large aperture scintillometer (LAS) along a 4.7 km path. The calculation of a mean diurnal cycle of the fluxes during the experiment revealed significant differences between the main land use classes. A land-use weighted average of the sensible heat flux was found to be in good agreement with the LAS based estimate, which in turn was supported by other regionally integrated flux estimates from budget considerations and aircraft measurements for a few case studies. The profiles of turbulent quantities measured along a 99 m-tower significantly deviate from “idealised” profiles measured over homogeneous terrain. Peculiarities in the profile structure could be attributed to the heterogeneity of the terrain, namely to the differences in the surface characteristics of the footprint areas for the different tower levels. Received June 6, 2001; revised January 15, 2002; accepted April 4, 2002     

Energy balance closure for the LITFASS-2003 experiment

In the first part, this paper synthesises the main results from a series of previous studies on the closure of the local energy balance at low-vegetation sites during the LITFASS-2003 experiment. A residual of up to 25% of the available energy has been found which cannot be fully explained either by the measurement uncertainty of the single components of the surface energy balance or by the length of the flux-averaging period. In the second part, secondary circulations due to heterogeneities in the surface characteristics (roughness, thermal and moisture properties) are discussed as a possible cause for the observed energy balance non-closure. This hypothesis seems to be supported from the fluxes derived from area-averaging measurement techniques (scintillometers, aircraft).     

Airborne measurements of turbulent fluxes during LITFASS-98: Comparison with ground measurements and remote sensing in a case study

Summary ?Simultaneous flight measurements with the research aircraft Do 128 and the helicopter-borne turbulence probe Helipod were performed on 18 June 1998 during the LITFASS-98 field experiment. The area-averaged turbulent vertical fluxes of momentum, sensible, and latent heat were determined on a 15 km × 15 km and a 10 km × 10 km flight pattern, respectively. The flights were carried out over heterogeneous terrain at different altitudes within a moderately convective boundary layer with Cumulus clouds. Co-spectra-analysis demonstrated that the small scale turbulent transport was completely sampled, while the comparatively small flight patterns were possibly of critical size regarding the large-scale turbulence. The phygoide of the airplane was identified as a significant peak in some co-spectra. The turbulent fluxes of momentum and sensible heat at 80 m above the ground showed systematic dependence on the location of the flight legs above the heterogeneous terrain. This was not observed for the latent heat flux, probably due to the vertical distribution of humidity in the boundary layer. Statistical error analysis of the fluxes F showed that the systematic statistical error ΔF was one order of magnitude smaller than the standard deviation σ _F . The difference between area-averaged fluxes derived from simultaneous Helipod and Do 128 measurements was much smaller than σ _F , indicating that the systematic statistical error was possibly over-estimated by the usual method. In the upper half of the boundary layer the airborne-measured sensible heat flux agreed well with windprofiler/RASS data. A linear fit was the best approximation for the height dependence of all three fluxes. The linear extrapolations of the latent and sensible heat fluxes to the ground were in good agreement with tower, scintillometer, and averaged ground-station measurements on various surface types. Systematic discrepancies between airborne and ground-based measurements were not found. Received June 18, 2001; revised December 21, 2001; accepted June 3, 2002     

Towards a Validation of Scintillometer Measurements: The LITFASS-2009 Experiment

Scintillometry has been increasingly used over the last decade for the experimental determination of area-averaged turbulent fluxes at a horizontal scale of a few kilometres. Nevertheless, a number of assumptions in the scintillometer data processing and interpretation still call for a thorough evaluation, in particular over heterogeneous terrain. Moreover, a validation of the path-averaged structure parameters derived from scintillometer data (and forming the basis for the flux calculations) by independent measurements is still missing. To achieve this, the LITFASS-2009 field campaign has been performed around the Meteorological Observatory Lindenberg ?C Richard-A?mann-Observatory of the German Meteorological Service (DWD) in July 2009. The experiment combined tower-based in-situ turbulence measurements, field-scale laser scintillometers, long-range optical (large-aperture) and microwave scintillometers, and airborne turbulence measurements using an automatically operating unmanned aircraft. The paper describes the project design and strategy, and discusses first results. Daytime near-surface values of the temperature structure parameter, ${C_{T}^{2}}$ , over different types of farmland differ by more than one order of magnitude in their dependence on the type and status of the vegetation. Considerable spatial variability in ${C_{T}^{2}}$ was also found along the flight legs at heights between 50 and 100?m. However, it appeared difficult to separate the effects of heterogeneity from the temporal variability of the turbulence fields. Aircraft measurements and scintillometer data agreed in magnitude with respect to the temporal variation of the path-averaged ${C_{T}^{2}}$ values during the diurnal cycle. The decrease of ${C_{T}^{2}}$ with height found from the scintillometer measurements close to the surface and at 43?m under daytime convective conditions corresponds to free-convection scaling, whereas the aircraft measurements at 54 and 83?m suggest a different behaviour.     

Simulation of surface energy fluxes using high-resolution non-hydrostatic simulations and comparisons with measurements for the LITFASS-2003 experiment

Land-surface heterogeneity effects on the subgrid scale of regional climate and numerical weather prediction models are of vital interest for the energy and mass exchange between the surface and the atmospheric boundary layer. High-resolution numerical model simulations can be used to quantify these effects, and are a tool used to obtain area-averaged surface fluxes over heterogeneous land surfaces. We present high-resolution model simulations for the LITFASS area near Berlin during the LITFASS-2003 experiment, which were carried out using the non-hydrostatic model FOOT3DK of the University of Köln with horizontal resolutions of 1 km and 250 m. The LITFASS-2003 experimental dataset is used for comparison. The screen level quantities show good quality for the simulated pressure, temperature, humidity and wind speed and direction. Averaged over the four week experimental period, simulated surface energy fluxes at land stations show a small bias for the turbulent heat fluxes and an underestimation of the net radiation caused by excessive cloudiness in the simulations. For eight selected days with low cloud amounts, the net radiation bias is close to zero, but the sensible heat flux shows a strong positive bias. Large differences are found for latent heat fluxes over a lake, which are partly due to local effects on the measurements, but an additional problem seems to be the overestimation of the turbulent exchange under stable conditions in the daytime internal boundary layer over the lake. In the area average over the LITFASS area of 20 ×  20 km², again a strong positive bias of 70 W m^?2 for the sensible heat is present. For the low soil moisture conditions during June 2003, the simulation of the turbulent heat fluxes is sensitive to variations in the soil type and its hydrological properties. Under these conditions, the supply of ground water to the lowest soil layer should be accounted for. Different area-averaging methods are tested. The experimental set-up of the LITFASS-2003 experiment is found to be well suited for the computation of area-averaged turbulent heat fluxes.     

Processing and quality control of flux data during LITFASS-2003

Different aspects of the quality assurance and quality control (QA/QC) of micrometeorological measurements were combined to create a comprehensive algorithm which was then applied to experimental data from LITFASS-2003 (Lindenberg Inhomogeneous Terrain—Fluxes between Atmosphere and Surface: a long term Study). Eddy-covariance measurements of the latent heat flux were the main focus of the QA/QC efforts. The results of a turbulence sensor intercomparison experiment showed deviations between the different eddy-covariance systems on the order of 15%, or less than 30 W m⁻², for the latent heat flux and 5%, or less than 10 W m⁻², for the sensible heat flux. In order to avoid uncertainties due to the post-processing of turbulence data, a comprehensive software package was used for the analysis of experimental data from LITFASS-2003, including all necessary procedures for corrections and quality control. An overview of the quality test results shows that for most of the days more than 80% of the available latent heat flux data are of high quality so long as there are no instrumental problems. The representativeness of a flux value for the target land-use type was analysed using a stochastic footprint model. Different methods to calculate soil heat fluxes at the surface are discussed and a sensitivity analysis is conducted to select the most robust method for LITFASS-2003. The lack of energy balance closure, which was found for LITFASS-2003, can probably be attributed to the presence of low-frequency flux contributions that cannot be resolved with an averaging time of 30 min. Though the QA/QC system has been developed for the requirements of LITFASS-2003, it can also be applied to other experiments dealing with similar objectives.     

Evaporation over a Heterogeneous Land Surface: EVA_GRIPS and the LITFASS-2003 Experiment—An Overview

The Evaporation at Grid/Pixel Scale (EVA_GRIPS) project was realised in order to determine the area-averaged evaporation over a heterogeneous land surface at the scale of a grid box of a regional numerical weather prediction or climate model, and at the scale of a pixel of a satellite image. EVA_GRIPS combined surface-based and airborne measurements, satellite data analysis, and numerical modelling activities. A mesoscale field experiment, LITFASS-2003, was carried out in the heterogeneous landscape around the Meteorological Observatory Lindenberg (MOL) of the German Meteorological Service in May and June, 2003. The experiment was embedded in the comprehensive, operational measurement program of the MOL. Experimental determination of surface fluxes on a variety of spatial scales was achieved by employing micrometeorological flux stations, scintillometers, a combination of ground-based remote sensing instruments, and the Helipod, a turbulence probe carried by a helicopter. Surface energy fluxes were also derived from satellite data. Modelling work included the use of different Soil–Vegetation–Atmosphere Transfer schemes, a large-eddy simulation model and three mesoscale atmospheric models. The paper gives an overview on the background of EVA_GRIPS, and on the measurements and meteorological conditions during LITFASS-2003. A few general results are discussed.     

The Effect of Surface Heterogeneity on the Structure Parameters of Temperature and Specific Humidity: A Large-Eddy Simulation Case Study for the LITFASS-2003 Experiment

We conduct a high-resolution large-eddy simulation (LES) case study in order to investigate the effects of surface heterogeneity on the (local) structure parameters of potential temperature \(C_T^2\) and specific humidity \(C_q^2\) in the convective boundary layer (CBL). The kilometre-scale heterogeneous land-use distribution as observed during the LITFASS-2003 experiment was prescribed at the surface of the LES model in order to simulate a realistic CBL development from the early morning until early afternoon. The surface patches are irregularly distributed and represent different land-use types that exhibit different roughness conditions as well as near-surface fluxes of sensible and latent heat. In the analysis, particular attention is given to the Monin–Obukhov similarity theory (MOST) relationships and local free convection (LFC) scaling for structure parameters in the surface layer, relating \(C_T^2\) and \(C_q^2\) to the surface fluxes of sensible and latent heat, respectively. Moreover we study possible effects of surface heterogeneity on scintillometer measurements that are usually performed in the surface layer. The LES data show that the local structure parameters reflect the surface heterogeneity pattern up to heights of 100–200 m. The assumption of a blending height, i.e. the height above the surface where the surface heterogeneity pattern is no longer visible in the structure parameters, is studied by means of a two-dimensional correlation analysis. We show that no such blending height is found at typical heights of scintillometer measurements for the studied case. Moreover, \(C_q^2\) does not follow MOST, which is ascribed to the entrainment of dry air at the top of the boundary layer. The application of MOST and LFC scaling to elevated \(C_T^2\) data still gives reliable estimates of the surface sensible heat flux. We show, however, that this flux, derived from scintillometer data, is only representative of the footprint area of the scintillometer, whose size depends strongly on the synoptic conditions.     

Large-Eddy Simulations of Surface Heterogeneity Effects on the Convective Boundary Layer During the LITFASS-2003 Experiment

We investigate the impact of observed surface heterogeneities during the LITFASS-2003 experiment on the convective boundary layer (CBL). Large-eddy simulations (LES), driven by observed near-surface sensible and latent heat fluxes, were performed for the diurnal cycle and compare well with observations. As in former studies of idealized one- and two-dimensional heterogeneities, secondary circulations developed that are superimposed on the turbulent field and that partly take over the vertical transport of heat and moisture. The secondary circulation patterns vary between local and roll-like structures, depending on the background wind conditions. For higher background wind speeds, the flow feels an effective surface heat-flux pattern that derives from the original pattern by streamwise averaging. This effective pattern generates a roll-like secondary circulation with roll axes along the mean boundary-layer wind direction. Mainly the upstream surface conditions control the secondary circulation pattern, where the fetch increases with increasing background wind speed. Unlike the entrainment flux that appears to be slightly decreased compared to the homogeneously-heated CBL, the vertical flux of sensible heat appears not to be modified in the mixed layer, while the vertical flux of latent heat shows different responses to secondary circulations. The study illustrates that sufficient time averaging and ensemble averaging is required to separate the heterogeneity-induced signals from the raw LES turbulence data. This might be an important reason why experiments over heterogeneous terrain in the past did not give any clear evidence of heterogeneity-induced effects.     

The hail sensor intercomparison experiment

Abstract

The results of a calibration and intercomparison of hailpads performed at the Workshop is presented, and recommendations are made on future calibration work and on international cooperation for obtaining comparable measurements of hailfall characteristics.     

The O'Neill experiment of 1953

The official report on this first comprehensive field experiment in boundary-layer meteorology was published 1957 in two volumes, edited by Lettau and Davidson (hereafter L&D). The official report is supplemented in this paper by relevant pre-history developments and a discussion of some selected post-history interpretations and follow-up experiments.     

The SAMUM-1 experiment over Southern Morocco: overview and introduction

In May/June 2006, the largest mineral dust experiment to date (Saharan Mineral Dust Experiment, SAMUM-1) was conducted in Southern Morocco. The aim was to characterize dust particles near the world's largest mineral dust source, and to quantify dust-related radiative effects. At one of the two ground-based measurement sites dust particle size distribution, optical, hygroscopic, chemical and structural particle characteristics were measured. One research aircraft mainly measured solar spectral irradiances and surface albedo. The other aircraft provided in situ physical aerosol measurements and samples and lidar profiles through the dust layers. Three ground-based lidars were operated at the second ground-based measurement site. They determined optical dust properties, particle shape and temporal development of dust layers. Columnar, ground-based sun photometer measurements complemented the lidar data. Additionally a station in Évora, Portugal monitored dust outbreaks from the North African source region to the Iberian Peninsula during SAMUM-1.
Volumetric and columnar closure exercises utilized these detailed measurements of dust characteristics together with optical and radiative transfer models. Concurrent developments of a mesoscale dust transport model were validated with the experimental data. The paper gives an overview over rationale and design of SAMUM-1, introduces and highlights the subsequent reports on experimental and modelling results.