Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in fiver training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented, Sand with uniform grain size was used as the bed material, Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge, The three dimensional flow fields around a spur dike were investigated, The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in river training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented. Sand with uniform grain size was used as the bed material. Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge. The three dimensional flow fields around a spur dike were investigated. The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Experimental assessment and prediction of temporal scour depth around a spur dike

Spur dikes are river training structures that have been extensively used worldwide for towards enhancing flood control and the stability of embankments and riverbanks.However,scour around spur dikes can be a major problem affecting their stability and hydraulic performance.The precise computation of temporal scour depth at spur dikes is very important for the design of economical and safe spur dikes.This study focuses on experimentally assessing the temporal variation of scour depth around a vertical wall spur dike and identifying the parameters,which mostly influence spur dike performance for a channel bed surface comprised of sand-gravel mixtures.In the current study,the authors did physical experiments in a flume based study to obtain new data,aimed at deriving a new predictive model for spur dike scour and comparing its performance to others found in the literature.It was found that the dimensionless temporal scour depth variation increases with an increase in(i)the threshold velocity ratio,(ii)the densimetric Froude number of the bed surface sediment mixture,(iii)the flow shallowness(defined as the ratio of the approach flow depth,y,to the spur dike’s transverse length,l),and(iv)the flow depth-particle size ratio.It is also concluded that the temporal scour depth variation in the sediment mixture is influenced by the non-uniformity of sediment and decreases with an increase in the non-uniformity of the sediment mixture.A new mathematical model is derived for the estimation of temporal scour depths in sand-gravel sediment mixtures.The proposed equation has been calibrated and validated with the experimental data,demonstrating a good predictive capacity for the estimation of temporal scour depth evolution.     

FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS

Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.     

SCOUR DEPTH AND FLOW PATTERN OF ERODING PLANE JETS

Local scour may occur when a hydraulic structure is positioned in a channel with an erodible bed. Herewith investigated experimentally are the erosion and flow pattern due to a water jet passing over a channel bed at the asymptotic (final) state. The development of the scour hole, its maximum scour depth and length, are recorded and compared with available scour-depth relations. Two sets of experiments (see Table 1) were carded out. Set 1 (3 runs) was concerned with measuring the vertical instantaneous velocity distribution in the scour hole. The scour hole at the asymptotic (final) state, t=100 [h] was investigated. Set 2 (5 runs) was concerned with studying the physics of scouring. Thescour hole at about mid-state, t≈0.5 [h], was investigated; subsequently the scour-hole depth was linearly extended on the semi-log scale to 72 [h]; no velocity measurements were performed. The present data are put in context with some (popular) existing relations; recommended is a modification of some of these relations。     

Experiment and simulation of turbulent flow in local scour around a spur dyke

The turbulent flow in the local scour hole around a single non-submerged spur dyke is investigated with both experimental and numerical methods. The experiments are conducted under clear-water scour regime with an impermeable spur dyke. The scour geometry and flow velocities are measured in details with a high-resolution laser displacement meter, electro-magnetic velocimetries and PIV （Particle image velocimetry）. A 3D non-linear k-ε model is developed to simulate the complex local flow field around the scour area. The numerical model is formulated using FVM （Finite volume method） on a collocated unstructured mesh, capable of resolving complex geometries and boundaries. It is found that the simulation results are reasonably consistent with those of the experimental measurements. Based on the study results, the nature of the flow structure around a spur dyke with local scour hole is analyzed.     

Turbulent burst around experimental spur dike

Three-dimensional turbulent flow field was measured around an experimental spur dike by using a micro-acoustic Doppler velocimeter.Time fractions of turbulent burst events including outward interaction,ejection,inward interaction,and sweep were analyzed in each quadrant at the neighbor of the dike before and after the formation of scour hole.Over 80%of burst events near the bed have lower-order of magnitudes for both flat and scoured bed surfaces.Ejections and sweeps are prevalent before the local scour was initiated,and then outward interactions are dominant after the scour hole was formed.Conditional Reynolds stresses and high-order moments of turbulent velocities were analyzed along the thalweg.The magnitudes of u’-w’ pair were much larger than those of v’-vv’ pair in the scour zone.Among four burst events,ejections and sweeps are the higher order events contributing to the Reynolds stresses.Since sediment entrainment and transport are closely associated with turbulent bursts near bed,the development of scour hole greatly depends on the higher order event near the bed.     

Characterization of horseshoe vortex in a developing scour hole at a cylindrical bridge pier

Since local scour at bridge piers in rivers and estuaries is a major cause of bridge failure, estimation of the maximum local scour depth is of great importance to hydraulic and coastal engineers. Although numerous studies that focus on scour-depth prediction have been done and published, understanding of the flow and turbulence characteristics of the horseshoe vortex that drives the scour mechanism in a developing scour hole still is immature. This study aims to quantify the detailed turbulent flow field in a developing clear-water scour hole at a circular pier using Particle Image Velocimetry (PIV). The distributions of velocity fields, turbulence intensities, and Reynolds shear stresses of the horseshoe vortex that form in front of the pier at different scour stages (t=0, 0.5, 1, 12, 24, and 48 h) are presented in this paper. During scour development, the horseshoe vortex system was found to evolve from one initially small vortex to three vortices. The strength and size of the main vortex are found to increase with increasing scour depth. The regions of both the maximum turbulence intensity and Reynolds shear stress are found to form at a location upstream of the main vortex, where the large turbulent eddies have the highest possibility of occurrence. Results from this study not only provide new insight into the complex flow-sediment interaction at bridge piers, but also provide valuable experimental databases for advanced numerical simulations.     

LOCAL SCOUR AROUND BRIDGE ABUTMENTS

1 INTRODUCTION The protrusion of a bridge abutment or a spur dike into the main channel creates a disturbance and obstruction to the otherwise equilibrium state of sediment transportation in an alluvial river. The flow accelerates and separates at the upstream face of the abutment as it moves past the obstacle, creating a vortex trail that moves downstream in a direction approximately perpendicular to the structure. The result is that the bed around the structure is eroded locally. The l…     

Contributions of burst-sweep cycles to Reynolds shear stress over fluvial obstacle marks generated in a laboratory flume

This paper investigates the phenomena of turbulent bursting events,and to make a comparative study among the events in the scour geometry developed by short circular cylinders of fixed length with different diameters placed on the sand bed transverse to the flow.The distributions of turbulent kinetic energy(TKE),turbulent diffusion in both longitudinal and vertical directions at different locations of scour marks,and the contributions of burst-sweep cycles to the Reynolds shear stress are presented.     

Effect of slope angle of an artificial pool on distributions of turbulence

Experiments were carried out over a 2-dimentional pool with a constant length of 1.5 m and four different slopes.The distributions of velocity,Reynolds stress and turbulence intensities have been studied in this paper.Results show that as flow continues up the exit slope,the flow velocity increases near the channel bed and decreases near the water surface.The flow separation was not observed by ADV at the crest of the bed-form.In addition,the length of the separation zone increases with the increasing of entrance and exit slopes.The largest slope angle causes the maximum normalized shear stress.Based on the experiments,it is concluded that the shape of Reynolds stress distribution is generally dependent on the entrance and exit slopes of the pool.Also,the shape of Reynolds stress distribution is affected by both decelerating and accelerating flows.Additionally,with the increase in the slope angle,secondary currents are developed and become more stable.Results of the quadrant analysis show that the momentum between flow and bed-form is mostly transferred by sweep and ejection events.     

Influence of large woody debris on sediment scour at bridge piers

Large woody debris(LWD) reduces the flow area,deviate the flow and increases the velocity in correspondence of the bridge pier,therefore increases the maximum scour hole depth and accelerates sediment removal.Logs and drifts accumulated on bridge piers are of different dimensions.According to logs characteristics and river morphology,drift accumulations can either extend downstream the bridge pier or they can accumulate totally upstream.This paper aims to analyze the effect of drift accumulation planimetry on bridge pier scour.The experimental investigation has been carried out at the PITLAB hydraulic centre of Civil Engineering Department,University of Pisa,Italy.Drift accumulation was characterized by different relative longitudinal lengths,flow area occlusions,length of longitudinal drift and downstream planimetrical positions relative to the pier center.The experimental investigation has been carried out in clear-water conditions.Several pier sizes,channel widths and sediment materials have been tested.Maximum scour hole in presence of drift accumulation have been compared to the maximum scour hole for an isolated pier.Finally,data were compared with previous literature findings,which highlight the effect of the downstream extension of drift accumulation on bridge pier scour.New relationships have been proposed to predict the effect of drift accumulation on bridge pier scour,both in terms of relative maximum scour and temporal scour evolution.     

Live-bed scour downstream of block ramps for low densimetric Froude numbers

Sediment load plays a major role in the morphological evolution of rivers.Therefore,the analysis of the sediment load interaction with hydraulic structures is of main importance in order to enhance the preservation of fish habitats and river morphological characteristics.The present study analyzes the scour mechanisms downstream of a block ramp in live bed conditions,when the sediment supplied by the approaching flow is balanced by the sediment transported out of the scour hole.Experiments were performed in a model flume and the effect of the approaching sediment concentration on the scour geometry was analyzed.It was observed that the scour features depend deeply on the approaching sediment concentration and four main profile configurations were distinguished.The experimental data were analyzed and empirical relationships were developed in order to evaluate the depth and length of a scour hole,the dune height and the distance of the transversal section of maximum dune height from the ramp toe for different hydraulic and geometric conditions.It was also proved that the dynamic equilibrium shape of a scour hole does not depend on the sediment load time history.     

Numerical modeling of local scour at a submerged weir with a downstream slope using a coupled moving-mesh and maskedelement approach

This paper presents a model for local scour at submerged weirs with downstream slopes that uses a coupled moving-mesh and masked-element approach.In the developed model,the fluid-sediment interface is tracked using a moving-mesh technique,and the effects of the structure on the hydrodynamics and bed morphology are resolved using a masked-element technique.Compared to traditional sediment scour models,based on the moving-mesh technique,the present model has the advantage of allowing for a simpler setup of the computational grids and a larger-amplitude deformation.Laboratory experiments on local scour at a submerged weir with a downstream slope were conducted,which provided bed profiles at different time instants.The results obtained by the present model are compared to the experimental data.The comparisons demonstrate the performance of the model in satisfactorily predicting local scour at a submerged weir with a downstream slope.The model was further modified and employed to carry out additional computations to investigate the influence of various parameters and sub-models.     

Reduction of bend scour with an air-bubble screen-morphology and flow patterns

The interplay between streamwise flow,curvature-induced secondary flow,sediment transport and bed morphology leads to the formation of a typical bar-pool bed morphology in open-channel bends.The associated scour at the outer bank and deposition at the inner bank may endanger the outer bank’s stability or reduce the navigable width of the channel.Previous preliminary laboratory experiments in a sharply curved flume with a fixed horizontal bed have shown that a bubble screen located near the outer bank can generate an additional secondary flow located between the outer bank and the curvature-induced secondary flow and with a sense of rotation opposite to the latter.This bubble-induced secondary flow redistributes velocities and bed shear stresses.The reported study investigates the implications of a bubble screen on the flow and the morphology in configurations with mobile bed.Velocity measurements show that the bubble-induced secondary flow shifts the curvature-induced secondary flow in inwards direction and reduces its strength.The bubble screen considerably reduces morphological gradients.Maximum bend scour is reduced by about 50%and occurs further away from the outer bank where it does not endanger the bank stability anymore.The location of maximum scour coincides with the junction of the curvature-induced and bubble-induced secondary flows.At this same location,the maximum streamwise velocities and maximum vertical velocities impinging on the bed also occur,which indicates their importance with respect to the formation of bend scour.The bubble screen also substantially reduced deposition at the inner bank.These preliminary experiments show the potential of a bubble screen to influence and modify the bed morphology.     

REVIEW ON LOCAL SCOUR DUE TO JETS

The safety of an apron of the energy dissipator is threatened by the large-scale scour in the downstream of the apron due to the erosive action of a horizontal jet issuing from a sluice opening. Also, large-scale deposition of the scoured sediments due to an impinging jet in a plunging pool type energy dissipator affects the passage of flow adversely in the downstream channels. Owing to the significant practical importance, the problem of local scour due to jets has been studied by many investigators, In this paper, a comprehensive review of the up-to-date investigations on local scour due to horizontal and impinging jets is presented including all possible aspects, such as scouring process, parameters affecting scour, time variation of scour velocity distribution on the apron and within the scour hole, development of boundary layer thickness, bed shear stress, scour estimation formulas and protection works.     

Bed-roughness investigation for a 2-D model calibration： the San Martin case study at Lower Parana

This paper illustrates how the acoustic Doppler current profiler （ADCP） and single-beam echo-sounder （SBES） recordings can be used for the calibration of existing software to assist in generalizing the morphodynamic processes in large rivers at key sites such as bifi.trcations and confluences. Calibration of the MIKE21C numerical model by the Danish Hydraulic Institute at the 25-km-long reach of Lower Paran~ near Rosario （Argentina） is presented. This reach includes two downstream confluences and two bifurcations. The model simulates a 2-D depth-averaged flow velocity and the related sediment fluxes to predict the bifurcation morphodynamics that affects the Paranh waterway. To investigate the river channel bathymetry, roughness, flow discharge allocation at bifurcations, suspended sediment concentration and grain size distributions, several instruments were used. These instruments included two ADCPs by Teledyne RDI working at frequencies of 600 and 1,200 kHz, a Sontek ADCP working at a frequency of 1,000 kHz and a SBES. The method to assess suspended sediment concentration and grain size distributions has been previously described. This paper focuses primarily on investigating dune morphology （by means of SBES depth measurements） and friction velocity （by means of ADCP profiling） to determine the river channel bed-roughness. The 2-D model results agree with observed values of bed-roughness, flow velocity and suspended sediment concentration distributions at the investigated sections, known data of water slope and total load of bed sediment are in good agreement with model results.     

Three-dimensional modeling of pollutants transportation in the flow field around a spur dyke

Pollutants are carried by sediment-laden flow dissolved in water or adsorbed on sediment particles. A transient three-dimensional model based on a compressible VOF(volume of fluid) method was developed to simulate the transport of dissolved and particulate pollutants.VOF is a numerical technique for acquiring and tracking the free surface of water flow.Local scouring,deposition and re-suspension were simulated and the processes of adsorption and desorption of pollutants on suspended sediment were analyzed.A series of experiments and numerical simulations were performed to study the transportation and dispersion of pollutants in the flow around a non-submerged spur dyke in a straight flume of rectangular shape.The simulation results agreed well with the experimental results.A certain volume of pollutants solution was released into the flow at upstream of the spur dyke.The concentration reduced with time.The concentration reduction was slower in the circumfluence zone than in the main flow.The ratio of adsorption to desorption coefficients was different for pollutants on suspended sediment with different diameter.The peak concentration of dissolved pollutants increased with the ratio of the adsorption to the desorption coefficients.The angle of the spur dyke affected the peak concentration around the dyke.The effect of the angle on dissolved pollutants decreased with the ratio of adsorption to desorption coefficients.The adsorption and desorption coefficients,as well as the saturated adsorption capacity had no effect on the concentration of particulate pollutants.     

Estimate of NOX production in the lightning channel based on three-dimensional lightning locating system

Based on the VHF lightning locating system,a three-dimensional-space cell-gridded approach is used to extract the lighting channel and calculate the length of the channel.Through clustering of the located radiation sources and then extracting the lightning channel,it can accurately obtain the length of the channel.To validate the feasibility of the approach,a simulation experiment is designed,and it shows the length error is no more than 10%.The relationship between the NO production of per unit arc length and atmospheric pressure obtained in laboratory is applied to the NOX production of per unit flash length at different altitudes in this paper.The channel length and the NOX production of 11 negative cloud-to-ground flashes and 59 intracloud flashes in an isolated thunderstorm in the northeastern Qinghai-Tibet Plateau are calculated.The results show that the average channel lengths of per cloud-to-ground and intracloud flash are 28.9 and 22.3 km respectively;the average NOX productions of per cloud-to-ground and intracloud flash are 1.89×1025 and 0.42×1025 molecules,respectively.     

Characteristics of developing scour-holes at a sand-embedded cylinder

Characteristics of developing scour-holes at a sand-embedded 0.2 m diameter circular cylinder are presented. Non-intrusive, high-resolution topographic measurements of developing scour-holes were made with an experimental installation using a laser distance sensor （LDS） and precision step-motors. A clear-water experiment was conducted with bed shear stress equal to 95% of the critical bed shear stress for the initiation of sediment motion at the undisturbed plane sand bed with a d50 of 0.26 mm. During the running experiment of 21 hours duration, measurements were taken by the LDS in different azimuthal half-planes with θ= 0, 15, 30, 45, 60, 75, 90, 105, 120, 135, 150, 165 and 180° in order to study the spatio-temporal variation of geometric properties in developing scour-holes. After 21 hours, the equilibrium condition was approached, with a scour rate less than d50 per hour. Measurement of maximum scour depth in different azimuthal half-planes at different points in time during the experiment show that scour started at the cylinder side and surrounded the cylinder after about 20% of experiment time. Slopes of developing scour-holes presented three regions with different inclinations, which were attributed to vortex action. Both maximum scour depth and maximum scour radius at different azimuthal half-planes are well correlated with the maximum scour depth at plane with θ = 0°. When providing maximum scour depth at the cylinder front, the presented correlations are useful for simple calculation of scour-hole topography. This work provides an experimental database for advanced numerical simulation for loose sediment hydraulics.