Geodynamic setting and emplacement of mylonitic granitoids within the North Golpayegan shear zone,Iran

The metamorphic complex of the North Golpayegan is part of the Sanandaj-Sirjan Zone. There are at least three distinct stages of deformation in this complex. Throughout the first stage, Paleozoic and Mesozoic sedimentary rocks have experienced regional metamorphism during Late Jurassic tectonic events related to the subduction of the Neo-Tethys oceanic lithosphere under the Iranian microcontinent. During the second deformation stage in the Late Cretaceous-Paleocene, the rocks have been mylonitized. The third stage of deformation in the region has led to folding and faulting superimposed on previous structures, and to exhumation of the metamorphic complex. This stage has determined the current morphology and N70E strike of the complex. The mylonitic zones of the second stage of deformation have been formed along the dextral transpressional faults. During the third stage of deformation and exhumation of the metamorphic complex, the mylonitic zones have been uplifted to the surface. The granitoids in the metamorphic complex have been injected along the extensional shear fractures related to the dextral transpressional displacements. The granitoids have been transformed into mylonites within the synthetic or antithetic shear zones. These granitoids are recognized as syncollision type (CCG) and have been formed at the end of orogenic events synchronous to the collision between the Arabian and the Iranian plates at the Late Cretaceous-Paleocene.     

An investigation into the fault patterns in the Chadegan region, west Iran: Evidence for dextral brittle transpressional tectonics in the Sanandaj-Sirjan Zone

The NW-SE trending Sanandaj-Sirjan Zone (SSZ) is the internal part of the Zagros continental collision zone, which mainly consists of metamorphic rocks deformed in a dextral transpressional zone. This dextral transpression is attributed to brittle deformation related to late Cenozoic Arabia-Eurasia oblique continental collision. Major NW-trending faults, including the Dalan, Garmdareh, Yasechah, Sheida, and Ben faults, are reverse faults with a dextral strike-slip component. These faults were displaced by NW-trending synthetic and NE-trending antithetic faults. There are also E-trending thrusts and N-trending normal faults developing in directions that are, respectively, almost normal and parallel to the major shortening direction. The NW-trending Ben, Yasechah, and Sheida faults are NE-dipping faults, and the Dalan and Garmdareh faults are SW-dipping faults. These faults indicate the presence of a transpressive flower structure zone that probably led to the exhumation of Jurassic high-grade metamorphic rocks, such as eclogite, in the central part of the study area.     

Petrology and Rare Earth Elements Mineral Chemistry of Chadegan Metabasites (Sanandaj-Sirjan Zone,Iran): Evidence for Eclogite-Facies Metamorphism during Neotethyan Subduction

The metabasites of Chadegan, including eclogite, garnet amphibolite and amphibolite, are forming a part of Sanandaj–Sirjan Zone. These rocks have formed during the subduction of the Neo–Tethys ocean crust under Iranian plate. This subduction resulted in a subduction metamorphism under high pressuremedium temperature of eclogite and amphibolites facies condition. Then the metamorphic rocks were exhumed during the continental collision between the Afro–Arabian continent and the Iranian microcontinent. In the metabasite rocks, with typical MORB composition, garnet preserved a compositional zoning occurred during metamorphism. The magnesium (X_Mg) gradually increases from core to rim of garnets, while the manganese (X_Mn) decreases towards the rim. Chondrite–normalized Rare Earth Element patterns for these garnets exhibit core–to–rim increases in Light Rare Earth Elements. The chondrite–normalized REE patterns of garnets, amphiboles and pyroxenes display positive trend from LREEs to Heavy Rare Earth Elements (especially in garnet), which suggests the role of these minerals as the major controller of HREE distribution. The geochemical features show that the studied eclogite and associated rocks have a MORB origin, and probably formed in a deep–seated subduction channel environment. The geothermometry estimation yields average pressure of ~22 kbar and temperature of 470–520°C for eclogite fomation. The thermobarometry results gave T = 650–700°C and P ≈ 10–11 kbar for amphibolite facies.     

内蒙赤峰地区若干主干断裂带的构造热年代学

黑里河-宋三家和西拉木仑近东西向断裂的宏观和显微组构特征均指示了右行走滑剪切；小城子-八里罕北北东向断裂显示了平面上的左行剪切和剖面上的正断式剪切。根据断裂糜棱岩中长石残斑与韧性基质在粒径上的显著差异，采用逐级破碎、逐级分选的方法，逐次剔除长石残斑。从细粒韧性基质中分选出钾长石、斜长石和黑云母，进行糜棱岩矿物内部Rb—Sr等时线定年和单颗粒黑云母的激光熔化^40Ar／^39Ar定年。定年结果显示，糜棱岩化促进了手标本尺度上的同位素均一化，造成了原岩同位素时钟的重置。定年结果表明，黑里河-宋三家断裂变形的年龄为232Ma；西拉木仑断裂右行挤压走滑的年龄为165Ma。蒙古古生代岩浆弧与华北地块北缘的碰撞拼贴，以及华北-蒙古联合地块与西伯利亚板块的碰撞拼贴的远程效应。导致了上述2期变形。小城子-八里罕断裂的左行和正断式剪切的年龄介于127～117Ma，与喀喇沁核杂岩的快速隆升时期相同。壳-幔隆升促进了中下地壳的韧性化和拆离，导致了北北东向断裂的左行和正断式剪切。     

Systematic changes in orientation of linear mylonitic fabrics: An example of strain partitioning during transpressional deformation in north Golpaygan,Sanandaj–Sirjan zone,Iran

Kilometer-scale, shallowly dipping, NW-striking top-to-the NE reverse and dextral strike-slip shear zones occur in metamorphic rocks of north Golpaygan. These metamorphic rocks are exposed at the NE margin of the central part of the Sanandaj–Sirjan zone in the hinterland of the Zagros orogen. NW-striking top-to-the NE normal shear zones were also found in a small part of the study area. Structural evidence of three deformation stages were found. Pre-mylonitization metamorphic mineral growth happened during D₁. The main mylonitization event was during the D₂ deformational event, following coaxial refolding, synchronous to retrograde metamorphism of amphibolite to greenschist facies in the Late Cretaceous–Paleocene, and before D₃ folding and related mylonitization. We documented the systematic changes in the orientations of D₂ linear fabrics especially stretching lineations and superimposition relations of structures. It is concluded that the dextral strike-slip and dip-slip shear zones were coeval kinematic domains of partitioned dextral transpression. The shallowly dipping reverse and strike-slip shear zones are compatible with partitioning in a very inclined transpressional model. Fabric relations reflect that the top-to-the NE normal shear zones were not produced during deformation partitioning of inclined dextral transpression. The Late Cretaceous–Paleocene strain partitioning was followed by later N–S shortening and NE-extension in the north Golpaygan area.     

腾冲地块高地热异常区晚白垩世-始新世钾玄质强过铝花岗岩岩石地球化学、年代学特征及构造意义

腾冲地块高地热异常区清水左所营初糜棱岩化黑云母二长花岗岩岩体、新华黑石河热田强糜棱岩化黑云母二长花岗岩岩体、热海热田硫磺塘硅化碎裂正长花岗岩岩体变形变质、岩石地球化学及锆石年代学的研究表明,晚白垩世(73Ma)初糜棱岩化黑云母二长花岗岩岩体为高温钾玄质强过铝花岗岩,形成于活动大陆边缘火山弧-后碰撞转换或过渡构造环境,并经历强烈伸展变形作用,普遍发育早期近水平-低角度(30°)韧性伸展剪切糜棱面理,局部发育晚期高角度右旋走滑挤压韧性糜棱面理;始新世(48~46Ma)强糜棱岩化黑云母二长花岗岩岩体、硅化碎裂正长花岗岩岩体为中-高温钾玄质强过铝花岗岩,并具铝质A型花岗岩特征,形成于后碰撞-板内构造环境,以发育晚期高角度(70°~87°)右旋走滑挤压韧性糜棱面理为特征,其右旋走滑韧性剪切变形时代晚于始新世(48~46Ma)。晚白垩世-始新世钾玄质强过铝花岗岩的形成与俯冲-碰撞造山隆升后的伸展垮塌、拆沉地幔物质上涌玄武质岩浆底侵和地壳部分熔融作用密切相关。始新世-第四纪岩浆活动与高地热异常区(带)空间上密切伴生,新近纪晚期-第四纪构造活动主要表现为脆性走滑-拉张正断层和构造拉分断陷盆地的形成,构造断陷边界断裂与深部岩浆活动是导致腾冲地区高地热异常区(带)中-高温地热温泉沿走滑-拉张断裂带集中分布的主要原因。     

A Large-Scale Palaeozoic Dextral Ductile Strike-Slip Zone:the Aqqikkudug-Weiya Zone along the Northern Margin of the Central Tianshan Belt,Xinjiang,NW China

The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by "flower" strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269(5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins.     

Granitoids of the Magba shear zone,West Cameroon,Central Africa: Evidences for emplacement under transpressive tectonic regime

The Magba Shear Zone is made up of granites, migmatites, orthogneiss, metagabbro, mafic dyke and mylonites with coarse grained texture, porphyroblastic, granoblastic, cataclastic and mylonitic texture respectively. Structural features and kinematic indicators testify the syntectonic emplacement of Magba granitoids and also provide detailed information on the relative timing of deformation as follows: (1) D1 of tangential movement immediately followed by (2) the D2 phase which is heterogeneous simple shear in dextral transpressive context with a NW-SE direction (3) D3 tectonic phase is marked by sinistral transpressive tectonic and superposed folding with a NE-SW kinematic direction. Combined ductile NE-SW shear movements and NWSE compressional movements defined a transpressional tectonic regime during the D3 deformation (4) A brittle stage D4 is controlled by transcurrent tectonics and responsible for the emplacement of faults, and joints. The Magba granites would have intruded along sub-vertical mid-crustal feeder channels and were emplaced as a sheet or sheets along the shear zone during the early stage of the C3 shearing, followed by gabbro and mafic dyke at the late stage. Strike-slip dilatancy pumping under transpressive tectonic is suggested as a possible mechanism for the emplacement of the Magba granites.     

纳米比亚欢乐谷地区构造演化对铀成矿的制约

欢乐谷地区由新元古代泥砂质岩层夹铁镁质岩层组成。受达马拉期陆块碰撞事件的影响,发生区域中深地壳层次的强烈韧性变形。后碰撞期,在地壳增厚背景下,发生大规模伸展减薄和花岗岩浆作用,形成多种浅色花岗岩体即白岗岩。产铀白岗岩主要为D型及E型白岗岩,为S型壳源花岗岩。欢乐谷地区经历了四期五个阶段的构造演化,分别是:前达马拉期构造变形、达马拉碰撞造山期韧性变形(早阶段的挤压逆冲、晚阶段的走滑剪切韧性变形)、后达马拉期脆性变形和新生代整体抬升引起的脆性变形。广泛发育的白岗岩属于同构造期岩体。通过对变质岩和白岗岩的节理测量统计,基本确定了研究区的碰撞后区域应力场。最优势的主压应力方向介于N26°~35°方位间,其次为介于N110°~129°方位间和N345°~360°方位间的主压应力。目前保留在各类岩石中的密集节理构造,是碰撞造山后构造折返或岩浆上涌到达上地壳层次后才发生的,与铀矿富集关系密切。本研究初步探讨了达马拉期构造作用、韧性剪切、后期脆性断裂(基性岩墙侵位通道)与铀成矿作用的成因联系和制约作用。     

The Sierra Ballena Shear Zone in the southernmost Dom Feliciano Belt (Uruguay): evolution, kinematics, and deformation conditions

The Sierra Ballena Shear Zone (SBSZ) is part of a high-strain transcurrent system that divides the Neoproterozoic Dom Feliciano Belt of South America into two different domains. The basement on both sides of the SBSZ shows a deformation stage preceding that of the transcurrent deformation recognized as a high temperature mylonitic foliation associated with migmatization. Grain boundary migration and fluid-assisted grain boundary diffusion enhanced by partial melting were the main deformation mechanisms associated with this foliation. Age estimate of this episode is >658 Ma. The second stage corresponds to the start of transpressional deformation and the nucleation and development of the SBSZ. During this stage, pure shear dominates the deformation, and is characterized by the development of conjugate dextral and sinistral shear zones and the emplacement of syntectonic granites. This event dates to 658–600 Ma based on the age of these intrusions. The third stage was a second transpressional event at about 586 to <560 Ma that was associated with the emplacement of porphyry dikes and granites that show evidence of flattening. Deformation in the SBSZ took place, during the late stages, under regional low-grade conditions, as indicated by the metamorphic paragenesis in the supracrustals of the country rocks. Granitic mylonites show plastic deformation of quartz and brittle behavior of feldspar. A transition from magmatic to solid-state microstructures is also frequently observed in syntectonic granites. Mylonitic porphyries and quartz mylonites resulted from the deformation of alkaline porphyries and quartz veins emplaced in the shear zone. Quartz veins reflect the release of silica associated with the breakdown of feldspar to white mica during the evolution of the granitic mylonites to phyllonites, which resulted in shear zone weakening. Quartz microstructures characteristic of the transition between regime 2 and regime 3, grain boundary migration and incipient recrystallization in feldspar indicate deformation under lower amphibolite to upper greenschist conditions (550–400°C). On the other hand, the mylonitic porphyries display evidence of feldspar recrystallization suggesting magmatic or high-T solid-state deformation during cooling of the dikes.     

Neotectonics of East Anatolian Plateau (Turkey) and Lesser Caucasus: implication for transition from thrusting to strike-slip faulting

The east Anatolian plateau and the Lesser Caucasus are characterised and shaped by three major structures: (1) NW- and NE-trending dextral to sinistral active strike-slip faults, (2) N-S to NNW-trending fissures and /or Plio-Quaternary volcanoes, and (3) a 5-km thick, undeformed Plio-Quaternary continental volcano-sedimentary sequence accumulated in various strike-slip basins. In contrast to the situation in the east Anatolian plateau and the Lesser Caucasus, the Transcaucasus and the Great Caucasus are characterised by WNW-trending active thrust to reverse faults, folds, and 6-km thick, undeformed (except for the fault-bounded basin margins) continuous Oligocene-Quaternary molassic sequence accumulated in actively developing ramp basins. Hence, the neotectonic regime in the Great Caucasus and the Transcaucasus is compressional–contractional, and Oligocene-Quaternary in age; whereas it is compressional–extensional, and Plio-Quaternary in age in the east Anatolian plateau and the Lesser Caucasus.Middle and Upper Miocene volcano-sedimentary sequences are folded and thrust-to-reverse-faulted as a result of compressional–contractional tectonic regime accompanied by mostly calc-alkaline volcanic activity, whereas Middle Pliocene-Quaternary sequences, which rest with angular unconformity on the pre-Middle Pliocene rocks, are nearly flat-lying and dominated by strike-slip faulting accompanied by mostly alkali volcanic activity implying an inversion in tectonic regime. The strike-slip faults cut and displace dykes, reverse to thrust faults and fold axes of Late Miocene age up to maximum 7 km: hence these faults are younger than Late Miocene, i.e., these formed after Late Miocene. Therefore, the time period between late Serravalian (∼ 12 Ma) continent–continent collision of Arabian and Eurasian plates and the late Early Pliocene inversion in both the tectonic regime, basin type and deformation pattern (from folding and thrusting to strike-slip faulting) is here termed as the Transitional period.Orientation patterns of various neotectonic structures and focal mechanism solutions of recent earthquakes that occurred in the east Anatolian plateau and the Caucasus fit well with the N–S directed intracontinental convergence between the Arabian plate in the south and the Eurasian plate in the north lasting since Late Miocene or Early Pliocene in places.     

Neotectonics of East Anatolian Plateau (Turkey) and Lesser Caucasus: implication for transition from thrusting to strike-slip faulting

Abstract

The east Anatolian plateau and the Lesser Caucasus are characterised and shaped by three major structures: (1) NW- and NE-trending dextral to sinistral active strike-slip faults, (2) N-S to NNW-trending fissures and /or Plio-Quatemary volcanoes, and (3) a 5-km thick, undeformed Plio-Quatemary continental volcanosedimentary sequence accumulated in various strike-slip basins. In contrast to the situation in the east Anatolian plateau and the Lesser Caucasus, the Transcaucasus and the Great Caucasus are characterised by WNW-trending active thrust to reverse faults, folds, and 6-km thick, undeformed (except for the fault-bounded basin margins) continuous Oligocene-Quaternary molassic sequence accumulated in actively developing ramp basins. Hence, the neotectonic regime in the Great Caucasus and the Transcaucasus is compressional-contractional, and Oligocene-Quaternary in age; whereas it is compressional-extensional, and Plio-Quatemary in age in the east Anatolian plateau and the Lesser Caucasus.

Middle and Upper Miocene volcano-sedimentary sequences are folded and thrust-to-reverse-faulted as a result of compressional- contractional tectonic regime accompanied by mostly calc-alkaline volcanic activity, whereas Middle Pliocene-Quaternary sequences, which rest with angular unconformity on the pre-Middle Pliocene rocks, are nearly flat-lying and dominated by strike-slip faulting accompanied by mostly alkali volcanic activity implying an inversion in tectonic regime. The strike-slip faults cut and displace dykes, reverse to thrust faults and fold axes of Late Miocene age up to maximum 7 km: hence these faults are younger than Late Miocene, i.e., these formed after Late Miocene. Therefore, the time period between late Serravalian (~ 12 Ma) continent-continent collision of Arabian and Eurasian plates and the late Early Pliocene inversion in both the tectonic regime, basin type and deformation pattern (from folding and thrusting to strike-slip faulting) is here termed as the Transitional period.

Orientation patterns of various neotectonic structures and focal mechanism solutions of recent earthquakes that occurred in the east Anatolian plateau and the Caucasus fit well with the N-S directed intracontinental convergence between the Arabian plate in the south and the Eurasian plate in the north lasting since Late Miocene or Early Pliocene in places. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Transpression and juxtaposition of middle crust over upper crust forming a crustal scale flower structure: Insight from structural,fabric, and kinematic studies from the Rengali Province,eastern India

Deformational, metamorphic, monazite age and fabric data from Rengali Province, eastern India converge towards a multi-scale transpressional deformational episode at ca. 498–521 Ma which is linked with the latest phase of tectonic processes operative at proto-India-Antarctica join. Detailed sector wise study on mutual overprinting relationships of macro-to microstructural elements suggest that deformation was regionally partitioned into fold-thrust dominated shortening zones alternating with zones of dominant transcurrent deformation bounded between the thrust sense Barkot Shear Zone in the north and the dextral Kerajang Fault Zone in the south. The strain partitioned zones are further restricted between two regional transverse shear zones, the sinistral Riamol Shear Zone in the west and the dextral Akul Fault Zone in the east which are interpreted as synthetic R and antithetic R' Riedel shear plane, respectively. The overall structural disposition has been interpreted as a positive flower structure bounded between the longitudinal and transverse faults with vertical extrusion and symmetric juxtaposition of mid-crustal amphibolite grade basement gneisses over low-grade upper crustal rocks emanating from the central axis of the transpressional belt.     

Methane-Bearing Fluid Inclusions as Evidence of the Collisional Nature of High-Alumina Granites,Northern Sikhote-Alin,Russian Far East

The Khungariisk high-alumina S-type granites (northern Sikhote-Alin fold system, Russian Far East) have been formed as a result of anatectic melting during collision of the Anyuy sialic block with the continental margin in the Early Cretaceous. Methane-rich fluid inclusions are characteristic of these granites. The CH₄-H₂O fluid composition is explained by the release of water and methane from the sedimentary units residing on the oceanic plate, as it was subducted beneath the sialic block. This fluid seeped into the heated and deformed metamorphic rocks of the overlying block and initiated partial fusion of the granites. A comparison of the new data with the results of fluid-inclusion studies of high-alumina collisional granites from the Pamir Mountains and Japan reveals similarities. Thus, methane-bearing fluid is probably one of the general features of this granite type, reflecting its anatectic origin.     

Provenance of Miocene sandstones in northern Iraq: constraints from framework petrography,bulk-rock geochemistry and mineral chemistry

Modal analysis, bulk-rock geochemistry and phase chemistry of sandstones of the Miocene Fat'ha and Injana formations, northern Iraq, show that the clastics were derived from heterogeneous sources that include basic igneous and metamorphic rocks as well as older sedimentary rocks. The sandstones are generally carbonate-rich lithic arenites. Their geochemistry supports the petrographic results and indicates that they are all Fe-rich, lithic or quartz arkosic sandstones. According to geochemical data, garnets are derived from metamorphic sources, hornblende is of igneous origin, and clinopyroxenes, are produced by basic igneous rocks. Epidote is most probably to be a product of disintegration of metamorphic rocks, essentially, metamorphosed igneous rocks. Rutile geochemistry implies low-grade metamorphic and basic to ultrabasic igneous sources. Chemical composition of chromian spinels indicates that they are derived from Alpine-type peridotite. The ophiolitic-radiolarite belts of Taurus-Zagros as well as the uplifted Cretaceous and Paleocene strata of north and northeastern Iraq are likely to be the major source of clastics to the Fat'ha–Injana basin, a foreland basin formed as a result of the continental Arabian and Turkish/Iranian plates collision.     

Discussion on the dextral movement and its effect in continental China and adjacent areas since Cenozoic

Continental China has moved dextral Eastward since Cenozoic time, driven by the collision of the Indian with the Eurasian plate. Evidence for this comes from landscape evolution, the distribution of earthquake epicenters, Cenozoic sedimentary and volcanic rocks, and the measurement of GPS velocity vectors, the distribution of crustal stress, paleomagnetic data, and deep mantle structure, among others. This movement commenced around 40 Ma, coupled with thickened lithosphere and widespread stress release along strike-slip faults that bound the continental Chinese block. Because of continued Northward subduction of the Indian plate, manifestation of the dextral movement has intensified since 25 Ma. Far-reaching effects include extensive strike-slip movement on the Tan-Lu fault in Eastern China, formation of the Dabie ultrahigh pressure metamorphic terrane, extensive thrust faults in East China, delamination and thickening of the lithosphere of South China, a possible tectonic doubling of the Middle-Lower Yangtze Valley metallogenic belt, and the formation of the Japan, Huanghai (East China), and South China Sea.     

西藏阿里雅鲁藏布江缝合带韧性剪切带的磁组构特征

应用磁组构测量方法,厘定、划分了札达地区印度河—雅鲁藏布江缝合带内的韧性剪切带,两条强韧性带分别位于缝合带北缘和南缘,均具有南盘(下盘)俯冲、平面右旋扭动运动特征和压扁型应变特征。韧性剪切发生于65Ma以前,它们应是印—欧两大板块俯冲-碰撞剪切应变产物,是板块缝合带的重要组成部分。     

Late Cenozoic transpressional ductile deformation north of the Nazca–South America–Antarctica triple junction

The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New ⁴⁰Ar–³⁹Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year.     

Ductile and brittle deformations in the northern snake range,nevada

The northern Snake Range, east-central Nevada, is one of the metamorphic core complexes of the Sevier hinterland. Within the range a major décollement separates an ‘upper plate’ composed of brittlely deformed Paleozoic sedimentary rocks (mostly carbonates), from a ‘lower plate’ composed of metamorphic Upper Precambrian-Lower Cambrian rocks, intruded by gneissic granites. A study of the geometry and kinematics of structures and fabrics at outcrop scale and in thin sections indicates that: the northern Snake Range décollement has been a zone of intense non-coaxial E-vergent shear and transport in a ∼- N115°E direction. Outstanding asymmetric boudinage within the marble sheet capping the lower plate testifies for late ductile shear strains (γ) of at least 20. The interface between brittlely and ductilely deformed rocks seems too sharp to represent a regional rheological transition, but might result from two distinct phases of deformation. Ductile deformation in and below the décollement could have occurred before brittle deformation in the upper plate. Brittle faulting in the upper plate related to Basin and Range extension reactivated the upper surface of the ductile shear zone. High topographic relief on the normal faults bounding the range triggered the slide of olistolites from the upper plate into the adjacent Oligo-Miocene basins.     

Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran

The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.