Cretaceous episodic growth of the Japanese Islands

Abstract The Japanese Islands formed rapidly in situ along the eastern Asian continental margin in the Cretaceous due to both tectonic and magmatic processes. In the Early Cretaceous, huge oceanic plateaus created by the mid-Panthalassa super plume accreted with the continental margin. This tectonic interaction of oceanic plateau with continental crust is one of the significant tectonic processes responsible for continental growth in subduction zones. In the Japanese Islands, Late Cretaceous-Early Paleogene continental growth is much more episodic and drastic. At this time the continental margin uplifted regionally, and intra-continent collision tectonics took place in the northern part of the Asian continent. The uplifting event appears to have been caused by the subduction of very young oceanic crust (i.e. the Izanagi-Kula Plate) along the continental margin. Magmatism was also very active, and melting of the young oceanic slab appears to have resulted in ubiquitous plutons in the continental margin. Regional uplift of the continental margin and intra-continent collision tectonics promoted erosion of the uplifted area, and a large amount of terrigenous sediment was abruptly supplied to the trench. As a result of the rapid supply of terrigenous detritus, the accretionary complexes (the Hidaka Belt in Hokkaido and the Shimanto Belt in Southwest Japan) grew rapidly in the subduction zone. The rapid growth of the accretionary complexes and the subduction of very young, buoyant oceanic crust caused the extrusion of a high-P/T metamorphic wedge from the deep levels of the subduction zone. Episodic growth of the Late Cretaceous Japanese Islands suggests that subduction of very young oceanic crust and/or ridge subduction are very significant for the formation of new continental crust in subduction zones.     

The Argo Abyssal Plain

Eighteen geophysical transects were made in the Argo Abyssal Plain to study the magnetic anomalies, bathymetry and seismic structure. Magnetic anomalies were identified as being the Mesozoic anomalies M-10 to M-25, increasing in age from the Java Trench to the northwest continental shelf of Australia. A new bathymetric map shows that the Argo Abyssal Plain is bounded by the 5600-m contour and reaches a maximum depth of 5730 m against the inshore side of the Exmouth Plateau. Joey Rise was found to limit the Argo Abyssal Plain on the southwest. Continuous seismic profiles, sonobuoy data and seismic data from other cruises permit one to contour the depths to oceanic basement. Numerous diapir-like structures were observed, but their nature and origin is obscure.     

南海大陆边缘动力学:科学实验与研究进展

国家重点基础研究发展计划(973)项目(2007CB411700)首次在南海南部大陆边缘及西南次海盆开展长排列大震源多道地震、海底地震仪(OBS)折射/反射地震等的综合地球物理探测,结合地质构造、地球化学、动力模拟等的综合研究,形成如下重要认识:南海海盆新生代发生了早、晚两期海底扩张.早期扩张发生于33.5～25 Ma...     

青藏高原东北缘深地震测深震相研究与地壳细结构

通过对青藏高原东北缘不同构造单元深地震测深资料震相的综合分析,利用反射率理论地震图方法对实际记录模拟计算,进一步研究东北缘区域内部不同构造单元地壳细结构.结果显示：西秦岭褶皱造山带分隔了南北不同性质的地壳结构,北侧为相对稳定的临夏—兰州新生代盆地、南侧为强烈改造的松潘—甘孜地块;松潘—甘孜地块在青藏高原东北缘的构造演化过程中改造为萎缩的若尔盖高原盆地和盆地边缘褶皱造山两类不同的地壳结构;青藏高原东北缘中下地壳普遍存在以多层高低速相间、低速度结构为主的破碎松弛结构,这种特征在缝合带和造山带尤为明显,显示为地壳形变增厚、流变滑动的重要场所;结合二维速度结构及GPS研究结果,对青藏高原东北缘地壳形变及动力学过程进行了讨论.     

Paleomagnetic and gravimetrical reconnaissance of Cretaceous volcanic rocks from the Western Colombian Andes: paleogeographic connections with the Caribbean Plate

The reconstruction of the tectonic evolution of the oceanic crust, including the recognition of ancient oceanic plumes and the differentiation between multiple and single oceanic arcs, relies on the paleogeographic analysis of accreted oceanic fragments found in orogenic belts. Here we present paleomagnetic and gravity data from Cretaceous oceanic basaltic and gabbroic rocks, the continental metamorphic basement, and their associated cover from northwestern Colombia. Based on regional scale tectonic reconstructions and geochemical constraints, such rocks have been interpreted as remnants of an oceanic large igneous province formed in southern latitudes, which was accreted to the sialic continental margin during the Late Cretaceous. Gravity analyses suggest the existence of a coherent high density segment separated by major suture zones from a lower density material related to the continental crust and/or thick sedimentary sequences trapped during collision. A characteristic paleomagnetic direction in Early and Late Cretaceous oceanic volcano-plutonic rocks, revealing a southeastern declination (D) and a negative inclination (I), may be interpreted in two different ways: (1a primary magnetization (tilt-corrected direction D = 130.3°, I = -23.3°, k = 23.4, α₉₅ = 26.4°), suggesting clockwise rotation around 130°, and magnetization acquired in southern latitudes (range of 4°S to 21°S); or (2) a remagnetization event during a reverse interval of the Earth’s magnetic field in the Cenozoic (in situ direction D = 128.7°, I = -6.2°, k = 23.1, α₉₅ = 26.1°), suggesting a counter-clockwise rotation around 50°. The first scenario seems more plausible, as it is consistent with previous paleomagnetic studies at other localities; it is compatible with a southern paleogeography for this block, and when integrated with other regional geological and paleomagnetic studies, supports a southern Pacific origin of a major oceanic block, formed as a part of a broader Cretaceous plateau that may have extended south or southwest of Galapagos. After its initial accretion, this block was subsequently fragmented due to the oblique SW-NE approach to the continental margin during the Late Cretaceous.     

南海岩石层及边界构造的地球物理特征

南海经历了中生代主动大陆边缘到新生代被动大陆边缘的转换,其岩石层地球物理场具有明显的块、带特征.本文通过综合分析南海地区深地震探测、面波层析成像、重磁异常以及地热与岩石层流变学等各种地质地球物理资料,对南海地壳及岩石层的综合地球物理特征进行了深入总结,发现深地震探测剖面所确定的洋、陆壳转换位置与空间重力异常梯级带位置较为一致,据此拟定了南海洋、陆壳的转换边界;依据多条地壳结构剖面中拉张减薄的程度确定了正常减薄陆壳、洋陆壳过渡带及洋壳等属性特征,并初步圈定了南海下地壳高速层的分布范围.对比分析了南、北陆缘地壳结构及其拉张减薄的变化特征,从综合地球物理特征的相似性上推测了北部陆缘的中西沙陆块与南部陆缘的南沙礼乐滩陆块具有共轭对称性.依据S波速度梯度变化确定了南海岩石层厚度分布情况,揭示出南海北部陆缘存在一条岩石层厚度的减薄带,且该减薄带与高热流带具有较好的一致性.在综合分析的基础上,以深地震探测剖面与重、磁异常变化的对应性为基础,划定了南海边界构造的位置.     

Nankai Trough and Zenisu Ridge: a deep-sea submersible survey

Eight submersible dives between 3000 and 4200 m water depth were made off southern Japan in the eastern Nankai subduction zone. Benthic communities associated with chemosynthetic processes were discovered along the 800 m wide active tectonic zone, at the toe of the accretionary prism. A benthic community was also discovered along a zone of active compression, at the foot of Zenisu Ridge, 30 km south of Nankai Trough. Temperature measurements within the sediments below the benthic communities confirm that upward motion of interstitial water occurs there. Studies of water samples indicate advection of methane and light hydrocarbons. Specimens of the benthic community have been shown to have included in their shells carbonate resulting from methane consumption. Thus the benthic communities are related to overpressure-driven fluid advection along tectonic zones with active surface deformation. A 300 m high active scarp at the toe of the accretionary prism is related to relative motion in a 280° direction which is close to the 305° average direction of subduction in this area. The dives establish further that compressive deformation is presently occurring at the foot of Zenisu Ridge. The previous interpretation of the Zenisu Ridge as a zone of recent north-south intraplate shortening, 40 km south of the Nankai Trench, is confirmed. We conclude that tectonic evolution might well lead to future detachment of the Zenisu Ridge and overthrusting of this large piece of oceanic crust over the continental margin. Such a process might be an efficient one to emplace ophiolites over continents.     

Geodynamic significance of ophiolites within the Calabrian Arc

Abstract Slices of oceanic lithosphere belonging to the neo‐Tethys realm crop out discontinuously in the northern Calabrian Arc, Southern Apennines. They consist of high‐pressure–low‐temperature metamorphic ophiolitic sequences formed from metaultramafics, metabasites and alternating metapelites, metarenites, marbles and calcschist. Ophiolites occupy an intermediate position in the northern Calabrian Arc nappe pile, situated between overlying Hercynian continental crust and the underlying Apenninic limestone units. In the literature, these ophiolitic sequences are subdivided into several tectonometamorphic units. Geochemical characteristics indicate that metabasites were derived from subalkaline basalts with tholeiitic affinity (transitional mid‐oceanic ridge basalt type), and a harzburgitic‐lherzolitic protolith is suggested for the serpentinites. The pressure–temperature‐deformation paths of the metabasites from different outcrops display similar features: (i) the prograde segment follows a typical Alpine geothermal gradient up to a metamorphic climax at 350°C and 0.9 GPa and crystallization of the high‐pressure mineral assemblage occurs along a pervasive foliation developed during a compressive tectonic event; and (ii) the retrogression path can be subdivided in two segments, the first is characterized by nearly isothermal decompression to approximately 400°C and 0.3 GPa and the second follows a cooling trajectory. During low‐pressure conditions, a second deformation event produces millimetric to decametric scale asymmetric folds that describe west‐verging major structures. The third deformation event is characterized by brittle extensional structures. The tectonometamorphic evolution of the ophiolitic sequences from the different outcrops is similar. Both thermobarometric modeling and tectonic history indicate that the studied rocks underwent Alpine subduction and exhumation processes as tectonic slices inside a west‐verging accretionary wedge. The subduction of oceanic lithosphere was towards the present east; therefore, the Hercynian continental crust, overthrusted on the ophiolitic accretionary wedge after the neo‐Tethys closure, was part of the African paleomargin or a continental microplate between Africa and Europe.     

南海西南次海盆NH973-1测线地震解释

针对973项目“南海大陆边缘动力学与油气资源潜力”2009年新采集的多道地震剖面NH973-1测线进行了研究分析,获得以下初步认识:(1)西南次海盆深海平原南端下伏巨厚沉积体,表明陆坡坡脚不是洋陆边界的位置,深海平原南端为陆壳分布区,也可解释为洋陆过渡带.这种情况在南海的洋陆边界确定过程中应加以考虑.(2)西南次海盆洋...     

The palaeorotation of the troodos microplate,cyprus, in the late mesozoic-early cenozoic plate tectonic framework of the Eastern Mediterranean

The Troodos ophiolite formed during the Late Cretaceous (Turonian) in a spreading setting above a northerly-dipping subduction zone. Palaeomagnetic data establish that the ophiolite experienced a 90° anticlockwise palaeorotation that occurred during the Late Cretaceous-Early Eocene interval During this period, the ophiolite was stranded adjacent to a generally south-facing continental margin, the remnants of which are preserved in south-west Cyprus (Mamonia Complex), southern Cyprus (Moni melange) and in northern Cyprus (Kyrenia Range). A review of field evidence from these Mesozoic basin margin units shows that strike-slip played a critical role in their Late Cretaceous-Early Tertiary deformation while magnetic and gravity surveys support the existence of major lineaments preserved at depth beneath these areas. Thus, in agreement with available palaeomagnetic data from mainland Turkey and Africa, the rotated crustal unit is believed to be relatively small with its boundaries probably located in the vicinity of Cyprus. In the favoured palaeorotation model, a small supra-subduction zone oceanic crustal unit was rotated about a pole located close to the exposed ophiolite complex. Fragments of the northern continental margin became attached to the rotating microplate along strike-slip lineaments and were then carried southward to their present position. In the light of the regional tectonic setting, it was probably the oblique consumption of crust beneath the ophiolite and/or a collision outside the present area of Cyprus that provided the necessary driving force for the palaeorotation.     

Field and geochemical data bearing on the development of a mesozoic volcano-tectonic rift zone and back-arc basin in southernmost South America

A broad zone of dominantly subaerial silicic volcanism associated with regional extensional faulting developed in southern South America during the Middle Jurassic, contemporaneously with the initiation of plutonism along the present Pacific continental margin. Stratigraphic variations observed in cross sections through the silicic Jurassic volcanics along the Pacific margin of southernmost South America indicate that this region of the rift zone developed as volcanism continued during faulting, subsidence and marine innundation. A deep, fault-bounded submarine trough formed near the Pacific margin of the southern part of the volcano-tectonic rift zone during the Late Jurassic. Tholeiitic magma intruded within the trough formed the mafic portion of the floor of this down-faulted basin. During the Early Cretaceous this basin separated an active calc-alkaline volcanic arc, founded on a sliver of continental crust, from the then volcanically quiescent South American continent. Geochemical data suggest that the Jurassic silicic volcanics along the Pacific margin of the volcano-tectonic rift zone were derived by crustal anatexis. Mafic lavas and sills which occur within the silicic volcanics have geochemical affinities with both the tholeiitic basalts forming the ophiolitic lenses which are the remnants of the mafic part of the back-arc basin floor, and also the calc-alkaline rocks of the adjacent Patagonian batholith and their flanking lavas which represent the eroded late Mesozoic calc-alkaline volcanic arc. The source of these tholeiitic and calc-alkaline igneous rocks was partially melted upper mantle material. The igneous and tectonic processes responsible for the development of the volcano-tectonic rift zone and the subsequent back-arc basin are attributed to diapirism in the upper mantle beneath southern South America. The tectonic setting and sequence of igneous and tectonic events suggest that diapirism may have been initiated in response to subduction.     

南北构造带及邻域地壳、岩石层速度结构特征研究

本文利用重力数据采用Parker-Oldenburg方法反演了南北构造带及邻域地区的地壳厚度,同时采用体波地震层析成像方法反演了研究区的地壳至上地幔的三维速度结构.根据计算结果对研究区的地壳及岩石层结构进行了探讨,力图揭示南北构造带及邻域地壳、岩石层变形特征,并且对青藏高原边缘活动带壳幔构造演化的深部成因、研究区的上地幔流变性及其动力学意义进行了相应的讨论.通过分析研究表明南北构造带地区为地壳厚度剧变区,西侧为地壳增厚区,东侧的鄂尔多斯、四川盆地为地壳稳定区,而再向东为地壳逐渐减薄区.中国岩石层减薄与增厚的边界基本被限定在大兴安岭—太行山—秦岭—大巴山—武陵山一带,这也是东部陆缘带和中部扬子、鄂尔多斯克拉通地区深部构造边界的分界线,其两侧不仅浅层地质构造存在较大的差异,上地幔深部的物性状态和热活动也明显不同,这说明研究区的岩石层和软流层结构以及深部物质的分布存在横向非均匀性.中部地区和青藏高原深部构造边界的分界线位于东经100°—102°左右.     

Lateral variation in seismic velocities and rheology beneath the Qinling-Dabie orogen

The Qinling-Dabie orogen is an important tectonic belt that trends east-west and divides continental China into northern and southern parts.Due to its strong deformation,complicated structure,multiphase structural superposition and the massive exposed high and ultrahigh metamorphic rocks,its tectonic formation and geodynamical evolution are hot research topics worldwide.Previous studies mainly focused on the regional geological or geochemical aspects,whereas the geophysical constraints are few and isolated,in particular on the orogenic scale.Here,we integrate the available P- and S-wave seismic and seismicity data,and construct the rheological structures along the Qinling-Dabie orogen.The results demonstrate that:(1)there are strong lateral variations in the crustal velocity between the western and eastern sections of the Qinling-Dabie orogen,indicating the different origin and tectonic evolution between these two parts;(2) the lateral variations are also manifested in the rheological structure.The rigid blocks,such as South China and Ordos basin(North China Craton),resist deformation and show low seismicity.The weak regions,such as the margin of Tibet and western Qinling-Dabie experience strong deformation and accumulated stress,thus show active seismicity;(3) in the lower crust of most of the HP/UHP terranes the values of P-wave velocity are higher than the global average ones;finally(4) low P- and S-wave velocities and low strength in the lower crust and lithospheric mantle beneath Dabie indicate lithospheric delamination,and/or high temperature,and partial melting condition.     

南海共轭大陆边缘构造属性的综合地球物理研究

利用南海最新的重磁资料,在岩石物性分析和全海域分带变倾角化极磁异常反演磁性基底分布的基础上,选择6条典型剖面拟合反演其密度与磁性结构,在此基础上进行了深部结构的对比分析.反演中尽可能以海底地震仪探测数据(OBS)、多道地震等结果作为约束,其中FF'剖面层速度分析是利用“南海大陆边缘动力学及油气资源潜力”973项目200...     

The 3D magnetic structure beneath the continental margin of the northeastern South China Sea

Understanding the continental margin of the Northeastern South China Sea is critical to the study of deep structures, tectonic evolution, and dynamics of the region. One set of important data for this endeavor is the total-field magnetic data. Given the challenges associated with the magnetic data at low latitudes and with remanent magnetism in this area, we combine the equivalent-source technique and magnetic amplitude inversion to recover 3D subsurface magnetic structures. The inversion results show that this area is characterized by a north-south block division and east-west zonation. Magnetic regions strike in EW, NE and NW direction and are consistent with major tectonic trends in the region. The highly magnetic zone recovered from inversion in the continental margin differs visibly from that of the magnetically quiet zones to the south. The magnetic anomaly zone strikes in NE direction, covering an area of about 500 km × 60 km, and extending downward to a depth of 25 km or more. In combination with other geophysical data, we suggest that this strongly magnetic zone was produced by deep underplating of magma associated with plate subduction in Mesozoic period. The magnetically quiet zone in the south is an EW trending unit underlain by broad and gentle magnetic layers of lower crust. Its magnetic structure bears a clear resemblance to oceanic crust, assumed to be related to the presence of ancient oceanic crust there.     

Contrasts in Tectonic style of the Central and Southern Appalachians, United States: Insights from seismic reflection data

Two reflection seismic transects, one across the central Appalachians in Virginia and the other across the southern Appalachians in Georgia, reveal a significant contrast in mid- and lower crustal reflectivity from east to west. Data from east of the Blue Ridge geologic province in Virginia and to the east of the Inner Piedmont in Georgia show a highly reflective crust extending from the near-surface to the Moho, including zones of east-dipping reflections, a sub-horizontal reflection signature at 7 seconds, and a west-dipping Moho. Reflection seismic data from west of the Blue Ridge in Virginia and Inner Piedmont farther south are characterized by reflector geometries related to deformation above a master decollement, leading to classic ‘thin-skinned’ tectonic structures in the overlying allochthon, and few if any apparent structures in the underlying basement. The location of the Iapetan rifted margin, the preexistence of favorably oriented structures to the east of this point, and sub-horizontal weak zones within the lower Paleozoic shelf strata have played critical roles in the distribution of seismic reflector geometry. Seismic reflection signatures seen in the southeastern United States are a result of multiple episodes of deformation from the early Paleozoic through the middle Mesozoic. Oblique stresses during late Paleozoic time produced transpression that manifested itself as predominantly strike-slip faulting to the east of the Blue Ridge/Inner Piedmont. Onlapping lower Paleozoic shelf strata responded to tectonic stresses through thin-skinned deformation above a master decollement during the late Paleozoic Alleghanian orogeny, aided in part by sub-horizontal zones of weakness in the strata. This partitioning of strain was supported via tectonic buttressing provided by Precambrian continental crust that was little deformed in the Taconic orogeny. During the Alleghanian orogeny, the variations in Valley and Ridge deformational style between the central and southern Appalachians were controlled by the original shape of the continental edge. Further deformation during Mesozoic extension occurred to the east of the Precambrian rift margin in the region where favorably oriented faults were reactivated, leading to the rotation of the fault zones from more steeply dipping initial orientations, the merging of the mid-crustal reflection zone with the Moho, and the formation of Mesozoic basins and antiformal reflections in the seismic sections.     

Timing of the initial collision between the Indian and Asian continents

There exist three mainstream opinions regarding the timing of the initial collision between the Indian and Eurasian continents,namely,65±5,45±5,and 30±5 Ma.Five criteria are proposed for determining which tectonic event was related to the initial collision between India and Asia:the rapid decrease in the rate of plate motion,the cessation of magmatic activity originating from the subduction of oceanic crust,the end of sedimentation of oceanic facies,the occurrence of intracontinental deformation,and the exchange of sediments sourced from two continents.These criteria are used to constrain the nature of these tectonic events.It is proposed that the 65±5 Ma tectonic event is consistent with some of the criteria,but the upshot of this model is that the magmatic activity originating from the Tethyan subduction since the Mesozoic restarted along the southern margin of the Asian continent in this time after a brief calm,implying that the subduction of the Neotethys slab was still taking place.The magmatic activity that occurred along the southern margin of the Asian continent had a 7-Myr break during 72-65 Ma,which in this study is interpreted as having resulted from tectonic transformation from subduction to transform faulting,indicating that the convergence between the Indian and Asian continents was once dominated by strike-slip motion.The 30±5 Ma tectonic event resulted in the uplift of the Tibetan Plateau,which was related to the late stage of the convergence between these two continents,namely,a hard collision.The 45±5 Ma tectonic event is in accordance with most of the criteria,corresponding to the initial collision between these two continents.     

南海西南次海盆与南沙地块的OBS探测和地壳结构

跨越南海西南次海盆南部陆缘和南沙地块中部的OBS973-1测线是南海南部首次采集的海底地震仪(OBS)广角反射与折射深地震测线,本文通过震相分析和走时正演拟合,获得了沿测线的二维纵波速度结构模型.模拟结果显示表层沉积物速度2.5～4.5 km/s,厚度1000～3000m,局部基底面起伏较大.结晶基底的速度从顶部的4....     

南海南部陆缘构造变形特征及伸展作用:来自两条973多道地震测线的证据

973项目“南海大陆边缘动力学与油气资源潜力”在南海南部陆缘采集了两条多道地震剖面,其中NH973-1测线始于南海西南次海盆,横跨了整个南沙地区,至于婆罗洲西北侧,NH973-2测线位于礼乐滩东侧.对地震剖面的解释共划分出7个层序界面,地层可以划分为5个构造沉积单元.根据地震解释对不同时期断层的水平断距进行了测量及分析...     

The vP Velocity Structures of Sub-blocks in the North China Craton from Active Source Waveform Modeling and Tectonic Implications

We present the 1-D crustal velocity structure of the major tectonic blocks of the North China Craton(NCC) along 36°N based on synthetic seismogram modeling of long-range wide-angle reflection/refraction data. This profile extends from southwest Yan'an of central Shaanxi Province of China(109.47°E), across the southern Trans-North China Orogen(TNCO), the southwestern part of the North China Plain(NCP), the Luxi Uplift(LU) and the Sulu Orogen(SLO), ending at Qingdao City of Shandong Province, the eastern margin of China(120.12°E) along 36°N. We utilized reflectivity synthetic seismogram modeling of the active source data to develop 1-D velocity structures of the sub-blocks of the NCC. Our final model shows that the NCC crust varies remarkably among the tectonic units with different velocity structure features. Higher lower crustal velocity and Moho depth ～42 km is a major feature of the crust beneath southern Ordos Blockt. The TNCO which is composed of Lyuliangshan Mountains(LM), Shanxi Graben(SXG) and Taihangshan Mountains(TM) shows dominant trans-orogenic features. The NCP shows a dominant thickening of sediments, sharp crust thinning with Moho depth ～32 km and significant lower average velocity. The SLO and the LU shows a stratified crust, higher average velocity and crust thinning with Moho depth of ～35 km. Our model shows the coincidence between the deep structure and the surface geology among all the tectonic sub-blocks of the NCC.