Ultrahigh‐pressure and high‐P lawsonite eclogites in Muzhaerte,Chinese western Tianshan

Lawsonite eclogites are crucial to decipher material recycling along a cold geotherm into the deep Earth and orogenic geodynamics at convergent margins. However, their tectono‐metamorphic role and record especially at ultrahigh‐pressure (UHP) conditions are poorly known due to rare exposure in orogenic belts. In a ~4 km long cross‐section in Muzhaerte, China, at the western termination of the HP‐UHP metamorphic belt of western Tianshan, metabasite blocks contain omphacite and lawsonite inclusions in porphyroblastic garnet, although matrix assemblages have been significantly affected by overprinting at shallower structural levels. Two types of lawsonite eclogites occur in different parts of the section and are distinguished based on inclusion assemblages in garnet: Type 1 (UHP) with the peak equilibrium assemblage garnet+omphacite±jadeite+lawsonite+rutile+coesite±chlorite±glaucophane and Type 2 (HP) with the assemblage garnet+omphacite±diopside+lawsonite+titanite+quartz±actinolite±chlorite+glaucophane. Pristine coesite and lawsonite and their pseudomorphs in Type 1 are present in the mantle domains of zoned garnet, indicative of a coesite‐lawsonite eclogite facies. Regardless of grain size and zoning profiles, garnet with Type 1 inclusions systematically shows higher Mg and lower Ca contents than Type 2 (prp_4–25grs_13–24 and prp_1–8grs_20–45 respectively). Phase equilibria modelling indicates that the low‐Ca garnet core and mantle of Type 1 formed at UHP conditions and that there was a major difference in peak pressures (i.e., maximum return depth) between the two types (2.8–3.2 GPa at 480–590°C and 1.3–1.85 GPa at 390–500°C respectively). Scattered exposures of Type 1 lawsonite eclogite is scatteredly exposed in the north of the Muzhaerte section with a structural thickness of ~1 km, whereas Type 2 occurs throughout the rest of the section. We conclude from this regular distribution that they were derived from two contrasting units that formed along two different geothermal systems (150–200°C/GPa for the northern UHP unit and 200–300°C/GPa for the southern HP unit), with subsequent stacking of UHP and HP slices at a kilometre scale.     

Petrological constraints on the tectonic setting of the Kathmandu Nappe in the Langtang–Gosainkund–Helambu regions,Central Nepal Himalaya

The Gosainkund–Helambu region in central Nepal occupies a key area for the development of Himalayan kinematic models, connecting the well‐investigated Langtang area to the north with the Kathmandu Nappe (KN), whose interpretation is still debated, to the south. In order to understand the structural and metamorphic architecture of the Greater Himalayan Sequence (GHS) in this region, a detailed petrological study was performed, focusing on selected metapelite samples from both the Gosainkund–Helambu and Langtang transects. The structurally lowest sample investigated belongs to the Lesser Himalayan Sequence; its metamorphic evolution is characterized by a narrow hairpin P–T path with peak P–T conditions of 595 ± 25 °C, 7.5 ± 1 kbar. All of the other samples here investigated belong to the GHS. Along the Langtang section, two tectono‐metamorphic units have been distinguished within the GHS: the Lower Greater Himalayan Sequence (L‐GHS), characterized by peak P–T conditions at 728 ± 11 °C, 10 ± 0.5 kbar (corresponding to a T/depth ratio of 22 ± 1 °C km^?1), and the structurally higher Upper Greater Himalayan Sequence, with peak metamorphic conditions at 780 ± 20 °C, 7.8 ± 0.8 kbar (corresponding to a T/depth ratio of 31 ± 4 °C km^?1). This confirms the existence of a main tectono‐metamorphic discontinuity within the GHS, as previously suggested by other authors. The results of petrological modelling of the metapelites from the Gosainkund–Helambu section show that this region is entirely comprised within a sub‐horizontal and thin L‐GHS unit: the estimated peak metamorphic conditions of 734 ± 19 °C, 10 ± 0.8 kbar correspond to a uniform T/depth ratio of 23 ± 3 °C km^?1. The metamorphic discontinuity identified along the Langtang transect and dividing the GHS in two tectono‐metamorphic units is located at a structural level too high to be intersected along the Gosainkund–Helambu section. Our results have significant implications for the interpretation of the KN and provide a contribution to the more general discussion of the Himalayan kinematic models. We demonstrate that the structurally lower unit of the KN (known as Sheopuri Gneiss) can be correlated with the L‐GHS unit; this result strongly supports those models that correlate the KN to the Tethyan Sedimentary Sequence and that suggest the merging of the South Tibetan Detachment System and the Main Central Thrust on the northern side of the KN. Moreover we speculate that, in this sector of the Himalayan chain, the most appropriate kinematic model able to explain the observed tectono‐metamorphic architecture of the GHS is the duplexing model, or hybrid models which combine the duplexing model with another end‐member model.     

A cold Early Palaeozoic subduction zone in the North Qilian Mountains, NW China: petrological and U-Pb geochronological constraints

The north Qilian high‐pressure (HP)/low‐temperature (LT) metamorphic belt is composed mainly of blueschists, eclogites and greenschist facies rocks. It formed within an Early Palaeozoic accretionary wedge associated with the subduction of the oceanic crust and is considered to be one of the best preserved HP/LT metamorphic belts in China. Here we report new lawsonite‐bearing eclogites and eclogitic rocks enclosed within epidote blueschists in the North Qilian Mountains. Five samples contain unaltered lawsonite coexisting with omphacite and phengite as inclusions in garnet, indicating eclogite facies garnet growth and lawsonite pseudomorphs were observed in garnet from an additional 11 eclogites and eclogitic rocks. Peak pressure conditions estimated from lawsonite omphacite‐phengite‐garnet assemblages were 2.1–2.4 GPa at temperatures of 420–510 °C, in or near the stability field of lawsonite eclogite, and implying formation under an apparent geothermal gradient of 6–8 °C km^?1, consistent with metamorphism in a cold subduction zone. SHRIMP U‐Pb dating of zircon from two lawsonite‐bearing eclogitic metabasites yields ages of 489 ± 7 Ma and 477 ± 16 Ma, respectively. CL images and mineral inclusions in zircon grains indicate that these ages reflect an eclogite facies metamorphism. An age of 502 ± 16 Ma is recorded in igneous cores of zircon grains from one lawsonite pseudomorph‐bearing eclogite, which is in agreement with the formation age of Early Ordovician for some ophiolite sequences in the North Qilian Mountains, and may be associated with a period of oceanic crust formation. The petrological and chronological data demonstrate the existence of a cold Early Palaeozoic subduction zone in the North Qilian Mountains.     

Petrogenesis and deformation history of the lawsonite‐bearing blueschist facies metabasalts of the Diamante‐Terranova oceanic unit (southern Italy)

The Neotethyan oceanic Diamante‐Terranova unit (DIATU; southern Apennines–Calabria–Peloritani Terrane system) includes basic rocks that during the Cenozoic were subducted and metamorphosed to lawsonite‐blueschist facies conditions. Petrological and structural observations (both at the meso‐ and micro‐scale) show that lawsonite growth was continuous during three distinctive ductile deformation stages (D1–D3). These likely occurred close to the metamorphic peak, estimated at 350–390°C and 0.9–1.1 GPa, producing an equilibrium assemblage made of blue Na‐amphibole, lawsonite, chlorite and pumpellyite. Locally, pods dominated by quartz and epidote (plus chlorite, calcite and green Ca‐amphibole) developed at similar conditions (350–370°C, 0.8–0.9 GPa). Post‐peak evolution during the final exhumation of the DIATU along the subduction channel, also consisted of three deformation stages, defined by folding (D4) and normal faulting (D5) and finally by strike‐slip faulting (D6), affecting both the blueschist unit and the unconformably overlying Tortonian conglomerates. Vorticity analysis on syn‐tectonic lawsonite crystals indicates that severe flattening occurred during the D2 stage, with a significant secondary non‐coaxial strain component along the W–E plane. This is associated with an eastward tectonic vergence, consistent with the subsequent D3 and D4 folding stages characterized by a dominant ENE tectonic transport. It is suggested that exhumation started from the D2 stage and continued during D3 at similar HP/LT metamorphic conditions. The widespread occurrence of unreacted lawsonite crystals suggests that exhumation was very fast and supports the idea that concurrent ductile deformation might play a role in its preservation.     

Cold subduction zone in northern Calabria (Italy) revealed by lawsonite–clinopyroxene blueschists

Lawsonite blueschists are important markers of cold subduction zones, subjected to intense fluid circulation. This is because lawsonite preservation in exhumed blueschists and eclogites is typically linked to cold exhumation paths, accompanied by hydration. In the Catena Costiera (Calabria, southern Italy), lawsonite–clinopyroxene blueschists of the Diamante–Terranova Unit, affected by ductile shearing and retrogression, are exposed. Blueschists contain zoned clinopyroxene crystals, showing core–rim compositional variation from diopside to omphacite and hosting primary inclusions of lawsonite and titanite. Thermodynamic modelling of phase equilibria in the NCKFMASHTO system revealed peak metamorphic conditions of 2.0–2.1 GPa and 475–490°C for the Alpine subduction in Calabria. The subsequent post-peak metamorphic evolution mainly proceeded along a decompression and cooling path up to ~1.1 GPa and ~380°C. The final exhumation stages are recorded in the sheared blueschists where a mylonitic to ultramylonitic foliation developed at ~0.7 GPa and 290–315°C. Therefore, the P–T evolution of the Diamante–Terranova blueschists mostly occurred in the stability field of lawsonite, sustained by H₂O-saturated conditions during the exhumation path. The results of this study indicate that the blueschists underwent peak metamorphic conditions higher than previously thought, reaching a maximum depth of ~70 km under a very cold geothermal gradient (~6.6°C/km), during the Eocene subduction of the Ligurian Tethys oceanic crust in Calabria.     

Petrological evidence for stepwise accretion of metamorphic soles during subduction infancy (Semail ophiolite,Oman and UAE)

Metamorphic soles are tectonic slices welded beneath most large‐scale ophiolites. These slivers of oceanic crust metamorphosed up to granulite facies conditions are interpreted as forming during the first million years of intraoceanic subduction following heat transfer from the incipient mantle wedge towards the top of the subducting plate. This study reappraises the formation of metamorphic soles through detailed field and petrological work on three key sections from the Semail ophiolite (Oman and United Arab Emirates). Based on thermobarometry and thermodynamic modelling, it is shown that metamorphic soles do not record a continuous temperature gradient, as expected from simple heating by the upper plate or by shear heating as proposed in previous studies. The upper, high‐T metamorphic sole is subdivided in at least two units, testifying to the stepwise formation, detachment and accretion of successive slices from the down‐going slab to the mylonitic base of the ophiolite. Estimated peak pressure–temperature conditions through the metamorphic sole, from top to bottom, are 850°C and 1 GPa, 725°C and 0.8 GPa and 530°C and 0.5 GPa. These estimates appear constant within each unit but differing between units by 100–200°C and ~0.2 GPa. Despite being separated by hundreds of kilometres below the Semail ophiolite and having contrasting locations with respect to the ridge axis position, metamorphic soles show no evidence for significant petrological variations along strike. These constraints allow us to refine the tectonic–petrological model for the genesis of metamorphic soles, formed via the stepwise stacking of several homogeneous slivers of oceanic crust and its sedimentary cover. Metamorphic soles result not so much from downward heat transfer (ironing effect) as from progressive metamorphism during strain localization and cooling of the plate interface. The successive thrusts originate from rheological contrasts between the sole, initially the top of the subducting slab, and the peridotite above as the plate interface progressively cools. These findings have implications for the thickness, the scale and the coupling state at the plate interface during the early history of subduction/obduction systems.     

Formation and preservation of fresh lawsonite: Geothermobarometry of the North Makran Blueschists,southeast Iran

A low‐grade metamorphic “Coloured Mélange” in North Makran (SE Iran) contains lenses and a large klippe of low temperature, lawsonite‐bearing blueschists formed during the Cretaceous closure of the Tethys Ocean. The largest blueschist outcrop is a >1,000 m thick coherent unit with metagabbros overlain by interlayered metabasalts and metavolcanoclastic rocks. Blueschist metamorphism is only incipient in coarse‐grained rocks, whereas finer grained, foliated samples show thorough metamorphic recrystallization. The low‐variance blueschist peak assemblage is glaucophane, lawsonite, titanite, jadeite±phengitic mica. Investigated phase diagram sections of three blueschists with different protoliths yield peak conditions of ~300–380°C at 9–14 kbar. Magnesio‐hornblende and rutile cores indicate early amphibolite facies metamorphism at >460°C and 2–4 kbar. Later conditions at slightly higher pressures of 6–9 kbar at 350–450°C are recorded by barroisite, omphacite and rutile assemblages before entering into the blueschist facies and finally following a retrograde path through the pumpellyite–actinolite facies across the lawsonite stability field. Assuming that metamorphic pressure is lithostatic pressure, the corresponding counterclockwise P–T path is explained by burial along a warm geothermal gradient (~15°C/km) in a young subduction system, followed by exhumation along a cold gradient (~8°C/km); a specific setting that allows preservation of fresh undecomposed lawsonite in glaucophane‐bearing rocks.     

Thrusting and sinistral wrenching in a pre-Eocene HP-LT Caribbean accretionary wedge (Samaná Peninsula,Dominican Republic)

The North Caribbean margin is an example of an oblique convergence zone where the currently exposed HP–LT rocks are systematically localised close to strike-slip faults. The petrological and structural study of eclogite and blueschist facies rocks of the peninsula of Samaná (Hispaniola, Dominican Republic) confirms the presence of two different metamorphic units. The former diplays low metamorphic grade (Santa Barbara unit), characterized by the assemblage albite - lawsonite (7.5 ± 2 kbar and 320 ± 80 °C). The latter (Punta Balandra unit), thrust over the first unit towards the NW, and is characterized by the occurrence of blueschist and eclogite facies assemblages (13 ± 2 kbar and 450 ± 70 °C), within oceanic metasediments. The isothermal retrograde evolution occurred in epidote-blueschist facies conditions (9 ± 2 kbar and 440 ± 60 °C). The late greenschist facies evolution is contemporaneous with conjugate NW–SE extension and E–W strike-slip faulting. This late extension is for regional dome and basin structures. According to their lithotectonic, structural and metamorphic characteristics, the metamorphic nappe stack of Samaná may be interpreted as a fragment of an accretionary wedge thrust onto the North American continental shelf. Evolution of the wedge was associated with the active subduction of the North American plate, under the Greater Antilles arc, at the level of the Puerto Rico trench. During active Late Cretaceous convergence, the HP rocks were initially exhumed, within the accretionary prism, by thrusting parallel to the NE–SW direction of convergence. Subsequently, during the Eocene collision between the Caribbean plate and the North American margin, the installation of a transtensive regime of E–W direction supports the local development of conjugate extension of NW–SE direction that facilitated the final phase of exhumation of the HP rocks.     

Low-grade metamorphism of the Mikabu and northern Chichibu belts in central Shikoku, SW Japan: implications for the areal extent of the Sanbagawa low-grade metamorphism

In central Shikoku, SW Japan, the Mikabu belt is bounded to the north by the Sanbagawa belt, and to the south by the northern (N) Chichibu belt. The N-Chichibu belt can be further subdivided into northern and southern parts. There is no apparent difference in the overall geology, structure, or fossil and radiometric ages between the Mikabu belt and the northern part of the N-Chichibu belt. Greenstones from the Mikabu belt and the northern part of the N-Chichibu belt show evidence for similar low-grade metamorphism, and include the following mineral assemblages with albite+chlorite in excess: metamorphic aragonite, sodic pyroxene+quartz, epidote+actinolite+pumpellyite, glaucophane+ pumpellyite+quartz, and lawsonite (not with actinolite or glaucophane). These similarities suggest that the Mikabu belt and the northern part of the N-Chichibu belt belong to the same geological unit (the MB-NNC complex). The mineral assemblages also indicate that the MB-NNC complex belongs to a different metamorphic facies from the low-grade part of the Sanbagawa belt, that is, the former represents lower temperature/higher pressure conditions than the latter. Structural and petrological continuity between the MB-NNC complex and Sanbagawa belt has not yet been confirmed, but both have similar radiometric ages. It is therefore most likely that the MB-NNC complex and Sanbagawa belt belong to the same subduction complex, and were metamorphosed under similar but distinct conditions. These two units were juxtaposed during exhumation. In contrast, the southern part of the N-Chichibu belt is distinct in lithology and structure, and includes no mineral assemblages diagnostic of the MB-NNC complex and the Sanbagawa belt. Thus, the southern part of the N-Chichibu belt may represent a different geological unit from the MB-NNC complex and Sanbagawa belt.     

Geology and tectono‐metamorphic evolution of the Himalayan metamorphic core: insights from the Mugu Karnali transect,Western Nepal (Central Himalaya)

New structural and tectono‐metamorphic data are presented from a geological transect along the Mugu Karnali valley, in Western Nepal (Central Himalaya), where an almost continuous cross‐section from the Lesser Himalaya Sequence to the Everest Series through the medium‐high‐grade Greater Himalayan Sequence (GHS) is exposed. Detailed meso‐ and micro‐structural analyses were carried out along the transect. Pressure (P)–temperature (T) conditions and P–T–deformation paths for samples from different structural units were derived by calculating pseudosections in the MnNKCFMASHT system. Systematic increase of P–T conditions, from ~0.75 GPa to 560 °C up to ≥1.0 GPa–750 °C, has been detected starting from the garnet zone up to the K‐feldspar + aluminosilicate zone. Our investigation reveals how these units are characterized by different P–T evolutions and well‐developed tectonic boundaries. Integrating our meso‐ and micro‐structural data with those of metamorphism and geochronology, a diachronism in deformation and metamorphism can be highlighted along the transect, where different crustal slices were underthrust, metamorphosed and exhumed at different times. The GHS is not a single tectonic unit, but it is composed of (at least) three different crustal slices, in agreement with a model of in‐sequence shearing by accretion of material from the Indian plate, where coeval activity of basal thrusting at the bottom with normal shearing at the top of the GHS is not strictly required for its exhumation.     

Mesozoic to Cenozoic tectono‐metamorphic history of the South Pamir–Hindu Kush (Chitral,NW Pakistan): Insights from phase equilibria modelling,and garnet–monazite petrochronology

The Karakoram–Hindu Kush–Pamir and adjacent Tibetan plateau belt comprise a series of Gondwana‐derived crustal fragments that successively accreted to the Eurasian margin in the Mesozoic as the result of the progressive Tethys ocean closure. These domains provide unique insights into the thermal and structural history of the Mesozoic to Cenozoic Eurasian plate margin, which are critical to inform the initial boundary conditions (e.g. crustal thickness, structure and thermo‐mechanical properties) for the subsequent development of the large and hot Tibetan–Himalaya orogen, and the associated crustal deformation processes. Using a combination of microstructural analyses, thermobarometry modelling and U–Th–Pb monazite and Lu–Hf garnet geochronology, the study reappraises the metamorphic history of exposed mid‐crustal metapelites in the Chitral region of the South Pamir–Hindu Kush (NW Pakistan). This study also demonstrates that trace elements in monazite (especially Y and Dy), combined with thermodynamical modelling and Lu–Hf garnet dating, provides a powerful integrated toolbox for constraining long‐lived and polyphased tectono‐metamorphic histories in all their spatial and temporal complexity. Rocks from the Chitral region were progressively deformed and metamorphosed at sub‐ and supra‐solidus conditions through at least four distinct episodes from the Mesozoic to the Cenozoic. Rocks were first metamorphosed at ~400–500°C and ~0.3 GPa in the Late Triassic–Early Jurassic (210–185 Ma), likely in response to the accretion of the Karakoram during the Cimmerian orogeny. Pressure and temperature subsequently increased by ~0.3 GPa and 100°C in the Early‐ to Mid Cretaceous (140–80 Ma), coinciding with the intrusion of calcalkaline granitic plutons across the Karakoram and Pamir regions. This event is interpreted as the record of crustal thickening and the development of a proto‐plateau within the Eurasian margin due to a long‐lived episode of slab flattening in an Andean‐type margin. Peak metamorphism was reached in the Late Eocene–Early Oligocene (40–30 Ma) at conditions of 580–600°C and ~0.6 GPa and 700–750°C and 0.7–0.8 GPa for the investigated staurolite schists and sillimanite migmatites respectively. This crustal heating up to moderate anatexis likely resulted in the underthrusting of the Indian plate after a NeoTethyan slab‐break off or to the Tethyan Himalaya–Lhasa microcontinent collision and subsequent oceanic slab flattening. Near‐isothermal decompression/exhumation followed in the Late Oligocene (28–23 Ma) as marked by a pressure decrease in excess of ~0.1 GPa. This event was coeval with the intrusion of the 24 Ma Garam Chasma leucogranite. This rapid exhumation is interpreted to be related to the reactivation of the South Pamir–Karakoram suture zone during the ongoing collision with India. The findings of this study confirm that significant crustal shortening and thickening of the south Eurasian margin occurred during the Mesozoic in an accretionary‐type tectonic setting through successive episodes of terrane accretions and probably slab flattening, transiently increasing the coupling at the plate interface. Moreover, they indicate that the south Eurasian margin was already hot and thickened prior to Cenozoic collision with India, which has important implications for orogen‐scale strain‐accommodation mechanisms.     

Phase Equilibria of Hornblende‐Bearing Eclogite in the Western Dabie Mountain,Central China

The high-pressure (HP) eclogite in the western Dabie Mountain encloses numerous hornblendes, mostly barroisite. Opinions on the peak metamorphic P-T condition, PT path and mineral paragenesis of it are still in dispute. Generally, HP eclogite involves garnet, omphacite, hornblendes and quartz, with or without glaucophane, zoisite and phengite. The garnet has compositional zoning with XMg increase, XCa and XMn decrease from core to rim, which indicates a progressive metamorphism. The phase equilibria of the HP eclogite modeled by the P-T pseudosection method developed recently showed the following: (1) the growth zonation of garnet records a progressive metamorphic PT path from pre-peak condition of 1.9–2.1 GPa at 508°C–514°C to a peak one of 2.3–2.5 GPa at 528°C–531°C for the HP eclogite; (2) the peak mineral assemblage is garnet+omphacite+glaucophane+quartz±phengite, likely paragenetic with lawsonite; (3) the extensive hornblendes derive mainly from glaucophane, partial omphacite and even a little garnet due to the decompression with some heating during the post-peak stage, mostly representing the conditions of about 1.4–1.6 GPa and 580°C–640°C, and their growth is favored by the dehydration of lawsonite into zoisite or epidote, but most of the garnet, omphacite or phengite in the HP eclogite still preserve their compositions at peak condition, and they are not obviously equilibrious with the hornblendes.     

The P–T path of the ultra-high pressure Lago Di Cignana and adjoining high-pressure meta-ophiolitic units: insights into the evolution of the subducting Tethyan slab

The Lago di Cignana ultra‐high‐pressure unit (LCU), which consists of coesite–eclogite facies metabasics and metasediments, preserves the most deeply subducted oceanic rocks worldwide. New constraints on the prograde and early retrograde evolution of this ultra‐high pressure unit and adjoining units provide important insights into the evolution of the Piemontese–Ligurian palaeo‐subduction zone, active in Paleocene–Eocene times. In the LCU, a first prograde metamorphic assemblage, consisting of omphacite + Ca‐amphibole + epidote + rare biotite + ilmenite, formed during burial at estimated P < 1.7 GPa and 350 < T < 480 °C. Similar metamorphic conditions of 400 < T < 650 °C and 1.0 < P < 1.7 GPa have been estimated for the meta‐ophiolitic rocks juxtaposed to the LCU. The prograde assemblage is partially re‐equilibrated into the peak assemblage garnet + omphacite + Na‐amphibole + lawsonite + coesite + rutile, whose conditions were estimated at 590 < T < 605 °C and P > 3.2 GPa. The prograde path was characterized by a gradual decrease in the thermal gradient from ～9–10 to ～5–6 °C km^?1. This variation is interpreted as the evidence of an increase in the rate of subduction of the Piemonte–Ligurian oceanic slab in the Eocene. Accretion of the Piemontese oceanic rocks to the Alpine orogen and thermal relaxation were probably related to the arrival of more buoyant continental crust at the subduction zone. Subsequent deformation of the orogenic wedge is responsible for the present position of the LCU, sandwiched between two tectonic slices of meta‐ophiolites, named the Lower and Upper Units, which experienced peak pressures of 2.7–2.8 and <2.4 GPa respectively.     

Petrology,geochemistry and P–T–t path of lawsonite‐bearing retrograded eclogites in the Changning–Menglian orogenic belt,southeast Tibetan Plateau

The Changning–Menglian orogenic belt (CMOB) in the southeastern Tibetan Plateau, is considered as the main suture zone marking the closure of the Palaeo‐Tethys Ocean between the Indochina and Sibumasu blocks. Here, we investigate the recently discovered retrograded eclogites from this suture zone in terms of their petrological, geochemical and geochronological features, with the aim of constraining the metamorphic evolution and protolith signature. Two types of metabasites are identified: retrograded eclogites and mafic schists. The igneous precursors of the retrograded eclogites exhibit rare earth element distribution patterns and trace element abundance similar to those of ocean island basalts, and are inferred to have been derived from a basaltic seamount in an intra‐oceanic tectonic setting. In contrast, the mafic schists show geochemical affinity to arc‐related volcanics with the enrichment of Rb, Th and U, and depletion of Nb, Ta, Zr, Hf and Ti, and their protoliths possibly formed at an active continental margin tectonic setting. Retrograded eclogites are characterized by peak metamorphic mineral assemblages of garnet, omphacite, white mica, lawsonite and rutile, and underwent five‐stage metamorphic evolution, including pre‐peak prograde stage (M₁) at 18–19 kbar and 400–420°C, peak lawsonite‐eclogite facies (M₂) at 24–26 kbar and 520–530°C, post‐peak epidote–eclogite facies decompression stage (M₃) at 13–18 kbar and 530–560°C, subsequent amphibolite facies retrogressive stage (M₄) at 8–10 kbar and 530–600°C, and late greenschist facies cooling stage (M₅) at 5–8 kbar and 480–490°C. Laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) U–Pb spot analyses of zircon show two distinct age groups. The magmatic zircon from both the retrograded eclogite and mafic schist yielded protolith ages of 451 ± 3 Ma, which is consistent with the ages of Early Palaeozoic ophiolitic complexes and ocean island sequences in the CMOB reported in previous studies. In contrast, metamorphic zircon from the retrograded eclogite samples yielded consistent Triassic metamorphic ages of 246 ± 2 and 245 ± 2 Ma, which can be interpreted as the timing of closure of the Palaeo‐Tethys Ocean. The compatible peak metamorphic mineral assemblages, P–T–t paths and metamorphic ages, as well as the similar protolith signatures for the eclogites in the CMOB and Longmu Co–Shuanghu suture (LCSS) suggest that the two belts formed part of a cold oceanic subduction system in the Triassic. The main suture zone of the Palaeo‐Tethyan domain extends at least 1,500 km in length from the CMOB to the LCSS in the Tibetan Plateau. The identification of lawsonite‐bearing retrograded eclogites in the CMOB provides important insights into the tectonic framework and complex geological evolution of the Palaeo‐Tethys.     

Isotopic evidence for channeled fluid flow in low-grade metamorphosed Jurassic accretionary complex in the Northern Chichibu belt, western Shikoku, Japan

The low‐grade metamorphosed Jurassic accretionary complex of the Northern Chichibu Belt, Hijikawa area, western Shikoku, is divided into two units, the Hijikawa and Kanogawa units, that are separated by an out‐of‐sequence thrust (OOST), the Ozu‐Kawabegawa Fault. The Kanogawa unit south of the Ozu‐Kawabegawa fault consists mainly of sandstone, shale, broken formation of alternating sandstone and shale, greenstone, chert, and pelitic melange, while the Hijikawa unit is characterized by a stack of subunits separated by small‐scale thrusts. The subunits are mainly made up of basic, pelitic and psammitic semischists, schistose pelitic melange, and chert. Petrological and mineralogical constraints suggest peak metamorphic conditions of 204–247 °C at 1–3 kbar in the Kanogawa unit, and 228–289 °C at 3–5.6 kbar in the Hijikawa unit. Quartz and quartz‐calcite veins are widely developed in the study area, especially in the Hijikawa unit. Regional variations in stable isotopic data show that the δ¹⁸O_quartz and δ¹⁸O_calcite values in veins tend to increase towards the Ozu‐Kawabegawa Fault. The δ¹⁸O_{whole rock} values are remarkably high in some subunits close to OOSTs within the Hijikawa unit. Oxygen isotopic compositions from vein quartz indicate that a higher δ¹⁸O fluid migrated upward from depth along the Ozu‐Kawabegawa Fault within the accretionary prism during prehnite‐pumpellyite facies metamorphism. The fluid source is inferred to be pelitic rocks at higher temperatures and greater depths within the accretionary prism.     

Petrological and geochronological constraints on lower crust exhumation during Paleoproterozoic (Eburnean) orogeny,NW Ghana,West African Craton

New petrological and geochronological data are presented on high‐grade ortho‐ and paragneisses from northwestern Ghana, forming part of the Paleoproterozoic (2.25–2.00 Ga) West African Craton. The study area is located in the interference zone between N–S and NE–SW‐trending craton‐scale shear zones, formed during the Eburnean orogeny (2.15–2.00 Ga). High‐grade metamorphic domains are separated from low‐grade greenstone belts by high‐strain zones, including early thrusts, extensional detachments and late‐stage strike‐slip shear zones. Paragneisses sporadically preserve high‐pressure, low‐temperature (HP–LT) relicts, formed at the transition between the blueschist facies and the epidote–amphibolite sub‐facies (10.0–14.0 kbar, 520–600 °C), and represent a low (~15 °C km^?1) apparent geothermal gradient. Migmatites record metamorphic conditions at the amphibolite–granulite facies transition. They reveal a clockwise pressure–temperature–time (P–T–t) path characterized by melting at pressures over 10.0 kbar, followed by decompression and heating to peak temperatures of 750 °C at 5.0–8.0 kbar, which fit a 30 °C km^?1 apparent geotherm. A regional amphibolite facies metamorphic overprint is recorded by rocks that followed a clockwise P–T–t path, characterized by peak metamorphic conditions of 7.0–10.0 kbar at 550–680 °C, which match a 20–25 °C km^?1 apparent geotherm. These P–T conditions were reached after prograde burial and heating for some rock units, and after decompression and heating for others. The timing of anatexis and of the amphibolite facies metamorphic overprint is constrained by in‐situ U–Pb dating of monazite crystallization at 2138 ± 7 and 2130 ± 7 Ma respectively. The new data set challenges the interpretation that metamorphic breaks in the West African Craton are due to diachronous Birimian ‘basins’ overlying a gneissic basement. It suggests that the lower crust was exhumed along reverse, normal and transcurrent shear zones and juxtaposed against shallow crustal slices during the Eburnean orogeny. The craton in NW Ghana is made of distinct fragments with contrasting tectono‐metamorphic histories. The range of metamorphic conditions and the sharp lateral metamorphic gradients are inconsistent with ‘hot orogeny’ models proposed for many Precambrian provinces. These findings shed new light on the geodynamic setting of craton assembly and stabilization in the Paleoproterozoic. It is suggested that the metamorphic record of the West African Craton is characteristic of Paleoproterozoic plate tectonics and illustrates a transition between Archean and Phanerozoic orogens.     

Late‐stage orogenic loading revealed by contact metamorphism in the northern Appalachians,New York

Pelitic schists from contact aureoles surrounding mafic–ultramafic plutons in Westchester County, NY record a high‐P (~0.8 GPa) high‐T (~790 °C) contact overprint on a Taconic regional metamorphic assemblage (~0.5 GPa). The contact metamorphic assemblage of a pelitic sample in the innermost aureole of the Croton Falls pluton, a small (<10 km²) gabbroic body, consists of quartz–plagioclase–biotite–garnet–sillimanite–ilmenite–graphite–Zn‐rich Al‐spinel. Both K‐feldspar and muscovite are absent, and abundant biotite, plagioclase, sillimanite, quartz and ilmenite inclusions are found within subhedral garnet crystals. Unusually low bulk‐rock Na and K contents imply depletion of alkalic components and silica through anatexis and melt extraction during contact heating relative to typical metapelites outside the aureole. Thermobarometry on nearby samples lacking a contact overprint yields 620–640 °C and 0.5–0.6 GPa. In the aureole sample, WDS X‐ray chemical maps show distinct Ca‐enriched rims on both garnet and matrix plagioclase. Furthermore, biotite inclusions within garnet have significantly higher Mg concentration than matrix biotite. Thermobarometry using GASP and garnet–biotite Mg–Fe exchange equilibria on inclusions and adjacent garnet host interior to the high‐Ca rim zone yield ~0.5 ± 0.1 GPa and ~620 ± 50 °C. Pairs in the modified garnet rim zone yield ~0.9 ± 0.1 GPa and ~790 ± 50 °C. Thermocalc average P–T calculations yield similar results for core (~0.5 ± ~0.1 GPa, ~640 ± ~80 °C) and rim (~0.9 ± ~0.1 GPa, ~800 ± ~90 °C) equilibria. The core assemblages are interpreted to record the P–T conditions of peak metamorphism during the Taconic regional event whereas the rim compositions and matrix assemblages are interpreted to record the P–T conditions during the contact event. The high pressures deduced for this later event are interpreted to reflect loading due to the emplacement of Taconic allochthons in the northern Appalachians during the waning stages of regional metamorphism (after c. 465 Ma) and before contact metamorphism (c. 435 Ma). In the absence of contact metamorphism‐induced recrystallization, it is likely that this regional‐scale loading would remain cryptic or unrecorded.     

Subduction and exhumation mechanisms of ultra‐high and high‐pressure oceanic and continental crust at Makbal (Tianshan,Kazakhstan and Kyrgyzstan)

The Makbal Complex in the northern Tianshan of Kazakhstan and Kyrgyzstan consists of metasedimentary rocks, which host high‐P (HP) mafic blocks and ultra‐HP Grt‐Cld‐Tlc schists (UHP as indicated by coesite relicts in garnet). Whole rock major and trace element signatures of the Grt‐Cld‐Tlc schist suggest a metasomatized protolith from either hydrothermally altered oceanic crust in a back‐arc basin or arc‐related volcaniclastics. Peak metamorphic conditions of the Grt‐Cld‐Tlc schist reached ~580 °C and 2.85 GPa corresponding to a maximum burial depth of ~95 km. A Sm‐Nd garnet age of 475 ± 4 Ma is interpreted as an average growth age of garnet during prograde‐to‐peak metamorphism; the low initial εΝd value of ?11 indicates a protolith with an ancient crustal component. The petrological evidence for deep subduction of oceanic crust poses questions with respect to an effective exhumation mechanism. Field relationships and the metamorphic evolution of other HP mafic oceanic rocks embedded in continentally derived metasedimentary rocks at the central Makbal Complex suggest that fragments of oceanic crust and clastic sedimentary rocks were exhumed from different depths in a subduction channel during ongoing subduction and are now exposed as a tectonic mélange. Furthermore, channel flow cannot only explain a tectonic mélange consisting of various rock types with different subduction histories as present at the central Makbal Complex, but also the presence of a structural ‘dome’ with UHP rocks in the core (central Makbal) surrounded by lower pressure nappes (including mafic dykes in continental crust) and voluminous metasedimentary rocks, mainly derived from the accretionary wedge.     

Preservation of high‐P rocks coupled to rock composition and the absence of metamorphic fluids

Eclogites, blueschists and greenschists are found in close proximity to one another along a 1‐km coastal section where the Cyclades Blueschist Unit (CBU) is exposed on SE Syros, Greece. Here, we show that the eclogites and blueschists experienced the same metamorphic history: prograde lawsonite blueschist facies metamorphism at 1.2–1.9 GPa and 410–530°C followed, at 43–38 Ma, by peak blueschist/eclogite facies metamorphism at 1.5–2.1 GPa and 520–580°C. We explain co‐existence of eclogites and blueschists by compositional variation probably reflecting original compositional layering. It is also shown that the greenschists record retrogression at 0.34 ± 0.21 GPa and T = 456 ± 68°C. This was spatially associated with a shear zone on a scales of 10–100‐m and veins on a scale of 1–10‐cm. Greenschist facies metamorphism ended at (or shortly after) 27 Ma. We thus infer a period of metamorphic quiescence after eclogite/blueschist facies metamorphism and before greenschist facies retrogression which lasted up to 11–16 million years. We suggest that this reflects an absence of metamorphic fluid flow at that time and conclude that greenschist facies retrogression only occurred when and where metamorphic fluids were present. From a tectonic perspective, our findings are consistent with studies showing that the CBU is (a) a high‐P nappe stack consisting of belts in which high‐P metamorphism and exhumation occurred at different times and (b) affected by greenschist facies metamorphism during the Oligocene, prior to the onset of regional tectonic extension.     

Olivine‐bearing symplectites in fractured garnet from eclogite,Moldanubian Zone (Bohemian Massif) – a short‐lived,granulite facies event

Recent petrological studies on high‐pressure (HP)–ultrahigh‐pressure (UHP) metamorphic rocks in the Moldanubian Zone, mainly utilizing compositional zoning and solid phase inclusions in garnet from a variety of lithologies, have established a prograde history involving subduction and subsequent granulite facies metamorphism during the Variscan Orogeny. Two temporally separate metamorphic events are developed rather than a single P–T loop for the HP–UHP metamorphism and amphibolite–granulite facies overprint in the Moldanubian Zone. Here further evidence is presented that the granulite facies metamorphism occurred after the HP–UHP rocks had been exhumed to different levels of the middle or upper crust. A medium‐temperature eclogite that is part of a series of tectonic blocks and lenses within migmatites contains a well‐preserved eclogite facies assemblage with omphacite and prograde zoned garnet. Omphacite is partly replaced by a symplectite of diopside + plagioclase + amphibole. Garnet and omphacite equilibria and pseudosection calculations indicate that the HP metamorphism occurred at relatively low temperature conditions of ~600 °C at 2.0–2.2 GPa. The striking feature of the rocks is the presence of garnet porphyroblasts with veins filled by a granulite facies assemblage of olivine, spinel and Ca‐rich plagioclase. These minerals occur as a symplectite forming symmetric zones, a central zone rich in olivine that is separated from the host garnet by two marginal zones consisting of plagioclase with small amounts of spinel. Mineral textures in the veins show that they were first filled mostly by calcic amphibole, which was later transformed into granulite facies assemblages. The olivine‐spinel equilibria and pseudosection calculations indicate temperatures of ~850–900 °C at pressure below 0.7 GPa. The preservation of eclogite facies assemblages implies that the granulite facies overprint was a short‐lived process. The new results point to a geodynamic model where HP–UHP rocks are exhumed to amphibolite facies conditions with subsequent granulite facies heating by mantle‐derived magma in the middle and upper crust.