Geomorphic response to late Quaternary tectonics in the axial portion of the Southern Apennines (Italy): A case study from the Calore River valley

The present study focuses on the morphotectonic evolution of the axial portion of the Southern Apennine chain between the lower Calore River valley and the northern Camposauro mountain front (Campania Region). A multidisciplinary approach was used, including geomorphological, field‐geology, stratigraphical, morphotectonic, structural, ⁴⁰Ar/³⁹Ar and tephrostratigraphical data. Results indicate that, from the Lower Pleistocene onwards, this sector of the chain was affected by extensional tectonics responsible for the onset of the sedimentation of Quaternary fluvial, alluvial fan and slope deposits. Fault systems are mainly composed of NW‐SE, NE–SW and W‐E trending strike‐slip and normal faults, associated to NW‐SE and NE–SW oriented extensions. Fault scarps, stratigraphical and structural data and morphotectonic indicators suggest that these faults affected the wide piedmont area of the northern Camposauro mountain front in the Lower Pleistocene–Upper Pleistocene time span. Faults affected both the oldest Quaternary slope deposits (Laiano Synthem, Lower Pleistocene) and the overlying alluvial fan system deposits constrained between the late Middle Pleistocene and the Holocene. The latter are geomorphologically and chrono‐stratigraphically grouped into four generations, I generation: late Middle Pleistocene–early Upper Pleistocene, with tephra layers ⁴⁰Ar/³⁹Ar dated to 158±6 and 113±7 ka; II generation: Upper Pleistocene, with tephra layers correlated with the Campanian Ignimbrite (39 ka) and with the slightly older Campi Flegrei activity (⁴⁰Ar/³⁹Ar age 48±7 ka); III generation: late Upper Pleistocene–Lower Holocene, with tephra layers correlated with the Neapolitan Yellow Tuff (~15 ka); IV generation: Holocene in age. The evolution of the first three generations was controlled by Middle Pleistocene extensional tectonics, while Holocene fans do not show evidence of tectonic activity. Nevertheless, considering the moderate to high magnitude historical seismicity of the study area, we cannot rule out that some of the recognized faults may still be active. Copyright © 2018 John Wiley & Sons, Ltd.     

Deformation characterization of a regional thrust zone in the northern Rif (Chefchaouen,Morocco)

This paper provides the structural analysis of the Chefchaouen area in the northern Rif. Here the Dorsale Calcaire superposes, by means of an excellently exposed thrust fault, onto the Predorsalian succession in turn tectonically covering the Massylian Unit. Hanging wall carbonates of the Dorsale Calcaire Unit form a WSW-verging regional fold with several parasitic structures, deformed by late reverse faults in places indicating an ENE vergence. A 200 m thick shear zone characterizes the upper part of the Predorsalian succession, located at footwall of the Dorsale Calcaire Unit. Here the dominantly pelitic levels are highly deformed by (i) C′ type shear bands indicating a mean WSW tectonic transport and (ii) conjugate extensional shear planes marking an extension both orthogonal and parallel to the shear direction. The Massylian Unit is characterized by a strain gradient increasing toward the tectonic contact with the overlying Predorsalian succession, where the dominantly pelitic levels are so highly deformed so as appearing as a broken formation. Such as the previous succession, conjugate extensional shear bands and normal faults indicate a horizontal extension parallel to the thrust front synchronous with the mainly WSW-directed overthrusting. The whole thrust sheet pile recorded a further shortening, characterized by a NW–SE direction, expressed by several reverse and thrust faults and related folds. Finally strike-slip and normal faults were the last deformation structures recorded in the analyzed rocks. A possible tectonic evolution for these successions is provided. In the late Burdigalian, the Dorsale Calcaire Unit tectonically covered the Predorsalian succession and together the Massylian Unit. The latter two successions were completely detached from their basement and accreted in the orogenic wedge within a general NE–SW shortening for the analyzed sector of the northern Rif. At lithosphere scale the thrust front migration was driven by roll back and slab tear mechanisms producing a synchronous arching and related counterclockwise rotation of the tectonic prism along the African margin. Radial displacement involved extension parallel to the thrust front well-recorded in the analyzed rocks. The NE–SW shortening, probably acting in the Tortonian–Pliocene interval, was related to the final compression of the Rif Chain resulting in out-of-sequence thrusts affecting the whole orogenic belt.     

红河断裂带第四纪右旋走滑与尾端拉张转换关系研究

红河断裂带早第四纪以来发生的大规模右旋走滑运动，导致断裂北段尾端的质量亏损，形成了拉张区。右旋走滑量为７．１ｋｍ左右，拉张区右旋方向上的扩张量为５．３５ｋｍ左右，二者相互转换的量级是基本一致的，从而定量地证实了它们之间的成因联系     

Arc-parallel extension in preparation of the rotation of southwest Japan: Tectonostratigraphy and structures of the Lower Miocene Ichishi Group

Opening of the Japan Sea back arc basin was accompanied by extensional tectonics in the drifting southwest Japan arc. Various trends of Early Miocene grabens in the arc suggest multi-directional rifting, which necessarily involved strike-slip components of some of basin-margin faults. However, such components are not well understood. In this work we conducted a field survey in the Early Miocene Ichishi basin on the northern side of the Median Tectonic Line, central southwest Japan. We found that the basin was a compound of grabens that were formed along normal and sinistral strike-slip faults, the latter of which had northeast–southwest trends. The block faulting in this phase produced basement highs between sub-basins, which were filled with the lower part of the Ichishi Group. We found a low-angle angular unconformity at a middle horizon in the group, with which we define the upper and lower part of the group. The upper part onlapped both the basement highs and the lower part. It means that the transtensional basin formation ceased sometime between 18 and 17.5 Ma in the Ichishi area. The Ichishi basin turned subsequently into a sag basin subsided due to normal faulting probably along the Nunobiki-sanchi-toen fault zone. The transtension and the basin sag were driven by ENE–WSW extensional stress. This arc-parallel extension produced grabens various areas including Ichishi in the Early Miocene. The extensional deformation was eventually localized to the deep rift along the Fossa Magna to make the lithosphere under southwest Japan decoupled from that under northeast Japan. The decoupling allowed the rapid rotation of southwest Japan from ~17.5 Ma. The cluster of those grabens around the Ise bay probably determined the southeastern margin of the Kinki triangle.     

Fault-generated mountain fronts in the central apennines (Central Italy): Geomorphological features and seismotectonic implications

The morphotectonic framework of the Central Apennines is given by faulted blocks bounded by normal faults, mostly trending NW–SE, NNW–SSE and NE–SW, which cut previous compressive structures. Such a structural setting is consistent with the focal mechanisms of the earthquakes which often occur in this area. In this paper, three lithologically different normal fault-generated mountain fronts are analysed in order to assess the relations between their geomorphic features and active tectonics. They border the Norcia depression (Sibillini Mts, Umbria), the Amatrice–Campotosto plateau (Laga Mts, Lazio) and the Fucino basin (Marsica Mts, Abruzzi). The Norcia depression is bounded by a N20°W trending normal fault to the east and by a parallel antithetic fault to the west. The main fault has a 1000 m throw and gives rise to a wide fault escarpment, characterized by: (1) sharp slope breaks due to low angle gravity faults; (2) important paleolandslides; and (3) several fault scarplets on the piedmont belt affecting Quaternary deposits. The Amatrice–Campotosto plateau is delimited by the western slope of Mt Gorzano which runs along a N20°W trending normal fault having a 1500m throw. Minor parallel faults dislocate Quaternary landforms. Large-scale massmovements also occur here. The Fucino basin was struck by the 1915 Avezzano earthquake (I=XI MCS) which produced extensive surface faulting along two parallel NW trending normal fault escarpments on the eastern border of the basin. There is paleoseismic evidence including buried gravity graben in Late Glacial gravels and tectonic dip-slip striations on Holocene calcitic crusts covering bedrock normal fault planes. These data suggest that active extensional tectonics plays a major role in the slope morphogenesis of the Central Apennines and they indicate the importance of geomorphic analysis in seismic zonation of this area.     

基于GPS应变与震源机制解应力反演喜马拉雅构造带现今地壳形变特征

喜马拉雅构造带及其临近区域是印度板块与欧亚大陆板块挤压碰撞的前缘地带.本文利用GPS实测速度场与震源机制解数据分别计算了研究区域现今地壳岩石圈表面的GPS应变场及岩石圈内部的主应力分布,研究了印度板块持续挤压作用下板块边界带地壳岩石圈现今地壳形变的空间分布特征.结果显示,南北向的剧烈挤压变形与东西向的拉伸变形是现今青藏高原南缘地壳岩石圈的主要变形特征.其中南北向的地壳挤压变形主要集中在主前缘冲断带与雅鲁藏布江缝合带之间.东西方向上,南北走向的亚东—谷露断裂是区域地壳东西向伸展变形的重要分界断裂.75°E是研究区域地壳形变的另一条显著不连续边界,其西侧地壳主压应变强度低、方向弥散且最大主压应力方向一致性较差,而东侧地壳主压应变方向与主压应力方向以及地壳水平运动速度场方向均具有较好的一致性.布格重力异常的小波多尺度辨析结果显示该分界带与循喜马拉雅西构造结楔入欧亚大陆的印度板块密切相关.     

Intramontane basin development related to contractional and extensional structure interaction at the termination of a major sinistral fault: The Huércal-Overa Basin (Eastern Betic Cordillera)

Among the classical minor structural associations on the termination of transcurrent faults are horsetail splays formed by reverse, normal or strike-slip faults developing duplexes. However, temporal and spatial coexistence of contractional and extensional structures is very rarely documented. We discuss the relationships of contractional and extensional structures and associated sedimentary depocenters at the termination of a major strike-slip fault in the Eastern Betic Cordillera. Field mapping, kinematic fault analysis, paleostress determination and gravity prospecting in the Huércal-Overa Basin, at the southern termination of the NE–SW Alhama de Murcia transcurrent fault (AMF), are used to establish the relationships of tectonic structures and associated sedimentary depocenters. Here, ENE–WSW and WNW–ESE folds interact with two sets of normal faults having the same orientation as well as ENE–WSW reverse faults. Progressive unconformities associated with folds reveal that the beginning of the AMF activity occurred in the Tortonian. The folds progressively grew and rotated from ENE–WSW up to WNW–ESE close to the transcurrent fault. We propose that the development of the normal faults developed during short-term episodes characterized by vertical major stress axis and are, in turn, related to gravitational instability linked to the thickening of a crust relatively hot at depth. This setting may have become predominant in between the main activity, compressive pulses along transcurrent faults.     

Seismic expression of active extensional faults in northern Umbria (Central Italy)

This paper deals with the geometry and kinematics of the active normal faults in northern Umbria, and their relationship with the seismicity observed in the area. In particular, we illustrate the contribution of seismic reflection data (a network of seismic profiles, NNW–SSE and WSW–ENE trending) in constraining at depth the geometry of the different active fault systems and their reciprocal spatial relationships. The main normal fault in the area is the Alto Tiberina fault, NNW trending and ENE dipping, producing a displacement of about 5 km, and generating a continental basin (Val Tiberina basin), infilled by up to 1500 m with Upper Pliocene–Quaternary deposits. The fault has a staircase trajectory, and can be traced on the seismic profiles to a depth of about 13 km. A set of WSW-dipping, antithetic faults can be recognised on the profiles, the most important of which is the Gubbio fault, bordering an extensional Quaternary basin and interpreted as an active fault based on geological, geomorphologic and seismological evidence. The epicentral distribution of the main historical earthquakes is strictly parallel to the general trend of the normal faults. The focal mechanisms of the major earthquakes show a strong similarity with the attitude of the extensional faults, mapped at the surface and recognised on the seismic profiles. These observations demonstrate the connection between seismicity in the area and the activity of the normal faults. Moreover, the distribution of the instrumental seismicity suggests the activity of the Alto Tiberina fault as the basal detachment for the extensional tectonics of the area. Finally, the action of the Alto Tiberina fault was simulated using two dimensional finite element modelling: a close correspondence between the concentration of shear stresses in the model and the distribution of the present earthquakes was obtained.     

Contractional tectonics and magma paths in volcanoes

This study aims to contribute a possible explanation for magma migration within volcanoes located in contractional tectonic settings, based on field data and physically-scaled experiments. The data demonstrate the occurrence of large stratovolcanoes in areas of coeval reverse faulting, in spite of the widely accepted idea that volcanism can develop only in extensional/transcurrent tectonic settings. The experiments simulate the propagation of deformation from substrate reverse faults with different attitudes and locations into volcanoes. The substrate fault splits into two main shear zones within the volcano: A shallow-dipping one, with reverse motion, propagates towards the lower volcano flank, and a steeper-dipping one, with normal motion, propagates upwards. In plan view, the reverse fault zone is arcuate and convex outwards, whereas the normal fault zone is rectilinear. Structural field surveys at volcanoes located in contractional settings show similar features: The Plio–Quaternary Trohunco and Los Cardos–Centinela volcanic complexes (Argentina) lie above Plio–Quaternary reverse faults. The Late Pleistocene–Holocene El Reventador volcano (Ecuador) is also located in a coeval contractional tectonic belt. These volcanoes show curvilinear reverse faults along one flank and rectilinear extensional fracture zones across the crater area, consistent with the experiments. These data consistently suggest that magma migrates along the substrate reverse fault and is channelled along the normal fault zone across the volcano.     

2010年玉树MS7.1地震同震破裂、余震分布特征及其与构造的关系

针对2010年4月14日玉树发生M_S7.1地震,本文利用InSAR数据给出同震视线向位移确定出的发震断层空间展布,并以该同震位移为约束反演得到主震和最大余震的同震位错分布.结果表明,主震同震位错发生在东玉树断裂,最大余震同震位错发生在西玉树断裂东端;基于位错分布计算了同震库仑应力变化与西部余震集中区地震活动之间的关系,结果反映玉树主震后最为活跃的余震活动可能受控于近东西向的次级断层(走向约为85°),而非玉树主干断裂;玉树断裂带整体呈现为左旋走滑运动,但其具体断层运动形式表现出主干断裂典型走滑运动、走滑断裂间的拉张和逆冲性质的次级运动、次级断裂与主干断裂相互作用下更为复杂的多方向次级断层活动等等不同变形特征,而主震同震破裂与余震空间分布均与这些不同断层变形方式有着密切关系.     

CHANGES IN FAULT MOVEMENT PROPERTY AND GENETIC MECHANISM ON THE WESTERN SEGMENT OF THE XIANGSHAN-TIANJINGSHAN FAULT ZONE

The Xiangshan-Tianjingshan fault zone is an important part of the arc tectonic zone in northeastern Tibet, whose eastern segment is characterized by primarily left-lateral slip along with thrust component. In contrast, the fault movement property on the western segment of the Xiangshan-Tianjingshan fault zone is more complicated. According to the offset geomorphic features and cross sections revealed by the trenches and outcrops, the western segment is mainly a left-lateral strike-slip fault with normal component, and only accompanied with reverse component at specific positions. To determine the genetic mechanism of fault movement property on the western segment, we obtained three main factors based on the integrated analysis of fault geometry:(1)Step-overs:the left-stepping parallel faults in a sinistral shear zone create extensional step-overs and control the nearby and internal fault movement property; (2)terminal structures:they are conductive to stop rupture propagation and produce compressive deformation at the end of the fault trace; and(3)double bends:strike-slip faults have trace that bends such that slip between two adjacent blocks creates a compressive stress and thrust fault. Additionally, the Tianjingshan sub-block moves to SEE and creates an extensional stress at the end of the sub-block associated with normal faults. It shows that the Xiangshan-Tianjingshan fault zone has a complex evolution history, which is divided into two distinctive periods and characterized by laterally westward propagating.     

Seismotectonic Study on the West Part of the Interaction Zone Between Southern Tianshan and Northern Tarim

The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles.     

Deformation of “Villafranchian” lacustrine sediments in the Chisone Valley (Western Alps, Italy)

The Chisone Valley is located in the internal NW Alps, in the Pinerolese District, an area characterized by present low to medium seismicity. Fine-grained sediments (sand, silt and clay with interbedded gravel) crop out in the lower Chisone Valley: they were first interpreted as glaciolacustrine deposits, and then as a lacustrine infilling of the valley floor probably due to differential uplifting of the valley mouth. Review of this data, together with new field and palynological observations, lead us to refer the lacustrine deposits to approximately the Lower Pleistocene (Villafranchian). In many outcrops, the lacustrine deposits show strong soft-sediment deformation such as convolute laminations, water-escape structures and disrupted beds, some of them associated with folds and faults (cm to dm in size); only two sites show metric to decametric folds and faults trending E-W and N-S. Detailed structural analysis conducted along a recently exposed section (Rio Gran Dubbione site) shows several soft-sediment deformation features on the limbs of mesoscale folds. Because of their intimate structural association, the origin of these minor structures seems to be connected to synsedimentary activity on reverse and normal faults (m to dm in size) affecting the lacustrine deposits in the same locality. Soft-sediment deformation features can be interpreted as possible paleoseismites. If so, the present seismicity of the Pinerolese District, which is the major area of such activity in NW Italy, cannot be considered an isolated episode in the geological evolution of the region; even if there is no supporting evidence for continuous seismicity, the deformations in the lacustrine sediments of the Chisone Valley testify to Early Pleistocene seismic activity, probably related to the recent tectonic evolution of the internal side of the NW Alps.     

Early-stage rifting of the Southern Tyrrhenian region: The Calabria–Sardinia breakup

The Southern Tyrrhenian Sea is an extensional basins linked to the Neogene evolution of the Calabria subduction zone located in the western Mediterranean realm where controversial kinematic and geodynamical models have been proposed. Our study provides a key to unravel timing and mode of extension of the upper plate and the breakup of Calabria from Sardinia. By combining original stratigraphic analysis of wells and seismic profiles off Calabria with a stratigraphic correlation to onshore outcrops, we re-assess the tectonic evolution that controlled the sedimentation and basement deformation of the Southern Tyrrhenian basin during Serravallian–Tortonian times. We document the tectono-stratigraphic evolution of adjacent extensional basins characterized by 3rd order depositional sequences (Ser1, Tor1 and Tor2) and different modes of extension, subsidence and opposite dipping faults. Episodic basin development is recorded by a coarsening-up and fining-up trend of the sedimentary succession and by tectonically enhanced unconformities that reflect three episodes of fault activity. We reconstruct Serravallian–Tortonian paleogeographic maps and propose a block faulting model for the evolution of the Sardinia–Calabria area. Sardinia was disconnected from Calabria through N–S normal faults forming Tyrrhenian extensional basins that formed contemporaneously to the E–W opening of the Algerian basin. Unlike published Serravallian–Tortonian reconstructions of the western Mediterranean realm, our results support a geodynamic model characterized by rapid trench retreat, trench-normal extension in the entire overriding plate and very weak coupling between plates.     

Methods for determining the Pleistocene–Holocene component of displacement on active faults reactivating pre-Quaternary structures: examples from the Central Apennines (Italy)

In the tectonically active fault system of the Central Apennines Ridge (Italy) several normal/transtensive faults mapped as Quaternary structures show evidence of pre-Neogene thrusting activity. Therefore, determining the amount of fault-slip during Pleistocene–Holocene times is crucial for seismic hazard assessment. Three principal lines of evidence have been used in this study for estimating the pre-Quaternary activity of extensional fault systems in the Central Apennines. The first is the geological and stratigraphic record (i.e. thickness and facies variations) for pre-Quaternary successions. The second is the widespread structural analysis evidence of extensional faults involved in Neogene thrust tectonics; whether considering a passive role (e.g. fault carried and tilted above a thrust-sheet) or inversion (e.g. positive inversion and related minor structures). The third is the geomorphological evidence, particularly erosion surface analysis, which permits the understanding of the relief generated by tectonics after the formation of post-thrusting erosional surfaces. Preliminary results from some faults which belong to the Sibillini Mts. and the Norcia extensional fault zones show clear evidence of Quaternary reactivations.     

Deformation history during chain building deduced by outcrop structural analysis: The case of the Sicilian fold-and-thrust belt (Central Mediterranean)

The Sicilian fold-and-thrust belt is located in the central Mediterranean area, and it represents the south-eastern arcuate segment of the Apennine-Maghrebide orogen. The tectonic evolution of the Sicilian belt is documented after outcrop analysis of small-scale structural features carried out throughout the region. Results are consistent with the following four main deformation stages having affected the study area, from the oldest to the youngest: (i) multilayer weakening; (ii) folding-and-thrusting, (iii) extension, and (iv) renewed thrusting. The first deformation stage included three different substages (layer-parallel shortening, bed-parallel simple shear and fold nucleation), the second one by both thrusting and fold amplification and tightening. The third deformation stage involved re-activation of the pre-existing mechanical discontinuities and formation of low-to-high angle normal faults. Out-of-sequence thrusting postdated the aforementioned extensional stage, and formed the latest orogenic deformation stage that affected the Sicilian belt.     

Thermal effects of Caledonian foreland basin formation,based on fission track analyses applied on basement rocks in central Sweden

Increasing evidence from fission track studies in Sweden indicate that large parts of the Fennoscandian Shield have been affected by a large-scale thermotectonic event in the Palaeozoic. In this study the results of 17 apatite fission track analyses from central Sweden are presented collected along three NW–SE transects trending from the Bothnian Sea to the Caledonides. On the Bothnian coast samples have been collected directly from the Sub-Cambrian Peneplain. The sedimentary cover protecting this surface until recently is responsible for the thermal increase detected through apatite fission track (FT) thermochronology.The apatite FT ages range between 516 ± 46 Ma (±1σ) on the Bothnian coast around sea level to 191 ± 11 Ma in the Caledonides (～500–1500 m.a.s.l.). The mean track lengths vary from 11.3 ± 2.2 μm (±1σ) in the east to 14.2 ± 2.8 μm in the west, indicating a longer stay in the PAZ in the east, versus a continuous cooling pattern in the west. This pattern in combination with other geological constraints indicates that the crystalline basement rocks near the Caledonian deformation front in the west experienced higher temperatures after the formation of the Sub-Cambrian Peneplain followed by denudation, compared with the basement rocks in the east near the Bothnian coast.The apatite FT data near the Caledonian deformation front indicates prevailing temperatures of more than 110 ± 10 °C prior to the Mid Palaeozoic, causing a resetting of the apatite fission track clock. The temperatures were progressively lower away from the deformation front. Apatite fission track analysis of samples collected from the Sub-Cambrian Peneplain along the Bothnian coast indicate maximum temperatures of 90 ± 15 °C during Late Silurian–Early Devonian time. This heating event is argued to be the result of burial beneath a developing foreland basin in front of the Caledonian orogeny. Assuming a geothermal gradient of 20 °C/km, this temperature increase can be converted to a total burial of the samples. The resulting geometry of this basin can be described as an asymmetrical basin at least 3.5 km deep in the vicinity of the Caledonian deformation front decreasing to about 2.5 km on the Bothnian coast, continuing further onto Finland. The width of this basin was in thus in the order of 600 km. Whether this was formed completely synorogenic or partly synorogenic, broadening after cessation of the orogeny, could not be revealed.The Late Palaeozoic and Mesozoic thermal evolution of this area is related to the extensional tectonics in the North Atlantic Domain.     

New findings on the tectono-metamorphic history of the western Rhenish Massif (Germany) by K–Ar dating of metasedimentary illite

Metapelites, clay-rich sandstones and volcanics from Cambrian, Ordovician and Lower Devonian strata of the western Rhenish Massif underwent a complex regional Variscan tectono-thermal evolution, as shown by mineralogical and K–Ar isotopic analyses of the illite to mica components from three NW-SE transects. The metamorphic degree extended from an anchimetamorphic to an epimetamorphic intensity during two major episodes of illite crystallization at 328 ± 6 and 282 ± 12 Ma. A further late orogenic or post-orogenic extensional activity could also be detected, but not precisely, around 270 Ma, probably recorded by the precipitation of illite in new or reactivated extensional faults with upward moving heat flows.     

利用D-InSAR技术研究西藏改则地震同震形变场

针对2008年1月9日MW6.4西藏改则地震和2008年1月16日的MW5.9余震,通过两通(2-pass)加外部DEM差分干涉处理技术(D-InSAR),提取了地震区域2次地震累积的视线向(LOS)同震形变场。结果表明:发震断层均为正断层,位于依布茶卡-日干配错断裂端点附近。主震发震断层走向为N30°E,余震发震断层走向为N21°E,两断层距离约7km;在影像上主震发震断层有造成地表破裂的痕迹,余震未见地表破裂的痕迹;这次地震造成的同震形变场长约30km,宽约20km,主震断层上盘和下盘视线向最大形变量分别为39.2cm和11.2cm,两盘相对位错达50.4cm,余震造成的视线向形变量为9.4cm     

The field and remote sensing analysis of the Kerguelen Archipelago structure,Indian Ocean

The Kerguelen Archipelago is part of an oceanic plateau with a complex history. Little work has been done on the tectonics of the onshore areas, even though the extensive outcrop renders the islands especially good for structural work. We present the results of three field campaigns and remote sensing analysis carried out in the main Kerguelen Island, around Val Travers valley and Mt Ross volcano (Central Plateau) and in the Rallier du Baty peninsula (SW part of the archipelago). We have mapped faults, fracture sets, and the location and geometry of intrusive bodies. We found that the plateau basalt lavas that make up most of the area are densely fractured, crossed by many veins, dykes and some small faults. This work provides a general framework for the structure of Kerguelen Archipelago that is dominated by 110°-striking faults and veins, dyke swarms and an alignment of recent central volcanoes, which have formed in N-S to NNW-SSE directed extensional stress field. The other structures are fractures, veins and dykes which strike 130–150°, 000° and 030–050°. They are likely related to transform faults of the Indian oceanic crust and to faults of the north Kerguelen Plateau (offshore basement of the archipelago). These buried structures were likely re-activated by a low magnitude stress field.