共查询到20条相似文献,搜索用时 828 毫秒
1.
2.
3.
察尔汗盐湖盐田光卤石矿成矿机理与盐田生产实用管理模型探讨 总被引:1,自引:1,他引:0
青海察尔汉盐湖是我国已探明储量的最大可溶性钾镁盐矿床,同时也是我国唯一的大型钾肥生产基地。本文根据多年对盐田生产定期取样分析的研究,系统探讨了大面积深水盐田的成矿机理与生产管理应用模型的建立与运行方法,对生产具有较强的指导意义。 相似文献
4.
对福建省泉州市钻孔,进行详细的第四纪沉积物粒度分析,同时结合地质背景、岩性等资料,得出了研究区第四纪以来沉积环境及其演变的认识。采用MS-2000型激光粒度分析仪进行测试,所测数据利用计算机整理,绘制出沉积物粒度频率曲线、概率累积曲线和粒度众数分布曲线图。根据曲线变化情况,进行沉积环境及其演变解释。区内第四纪沉积环境和沉积物的成因类型分为3个类型,晋江河道以冲积相为主,山前高地以洪冲积为主,盆地主体区域以海湾相为主。第四纪以来泉州盆地环境演化经历了:更新统中期龙海组洪积和洪冲积→更新统晚期东山组洪积和洪冲积→全新统长乐组海湾相沉积。 相似文献
5.
近20年辽河三角洲地貌演化 总被引:7,自引:1,他引:6
运用钻探和浅地层探测等最新调查成果,对近20年的辽河三角洲潮流沉积进行了研究.根据不同时期水深地形和卫星影像资料对比分析了现代辽河三角洲潮流地貌变化.现代辽河三角洲的沉积主体位于双台子河口.研究区10 m深度内的地层主要包括:潮滩相、潮道相和浅海相沉积,其下为古三角洲相.潮滩相沉积物以砂和粉砂为主,分选中等,跳跃和悬浮组分各占50%左右:浅海相和潮道相沉积物主要为软弱的粘土质粉砂和粉砂质粘土,以悬浮组分为主.全新世以来至1896年,研究区为古辽河、古大凌河和绕阳河之间的小海湾.1896年,双台子河被人工开挖为分洪河道以来,口门外形成盖州滩等潮滩,并快速发育.1958年,双台子河建闸后,人海径流量和输沙量减小.目前.双台子河口整体处于淤积状态,潮滩面积不断增加,整体向南、西、北3个方向扩展.潮滩最大淤进速率为87~683 m/a,平均淤积速率为0.189 m/a.潮滩东侧局部发生侵蚀,平均侵蚀速率为0.122 m/a.潮道面积缩小,具有向西、向北迁移的趋势,最大迁移速率为48~200m/a.双台子河口地貌发育受径流、海洋动力和人类活动的影响,沉积物的主要来源由双台子河河流输沙演变为潮流和沿岸流输沙. 相似文献
6.
萨拉乌苏河流域米浪沟湾末次冰期早冰阶时期记录了5.5个由古沙丘砂与河流相、湖沼相构成的沉积旋回。对各沉积旋回的粒度及微量元素分析表明,河流相和湖沼相的平均粒径Mz、分选系数σ和SC/D的值明显高于古沙丘砂,河湖相中的微量元素Mn、P、Rb、Zr、V、Ni含量普遍较古沙丘砂含量高,而Ba、Co等则呈现相反的变化;这些气候代用指标的波动构成了与沉积旋回相对应的5.5个粒度及微量元素变化旋回,指示了该地末次冰期早冰阶至少经历了6次冷干和5次暖湿的气候波动,其中若干次气候回暖事件和冷干事件可与格陵兰冰芯和葫芦洞石笋等记录的D/O事件和Heinrich事件相对应。米浪沟湾剖面地层记录的千年尺度气候波动既是对东亚季风环流演变历史的体现,同时也是对全球气候变化的响应。 相似文献
7.
中国干旱区内陆河流域中游地区分布了大量晚第四纪河、湖相交替的沉积地层,这些沉积物被广泛用于古气候和古环境重建。然而,以往的研究较多关注沉积物的理、化、生指标,而忽略了沉积相变的古环境意义,这可能使古环境重建结果产生偏差。针对这一问题,选取干旱区典型内陆河——石羊河中游地区的JDT全新世沉积剖面,进行年代学、沉积相、岩性和粒度的研究,并与该区域已有的HSH全新世剖面的地球化学和古生物指标进行对比,在分析沉积相的基础上讨论二者的环境代用指标,重建石羊河中游地区全新世的古环境。两个剖面在年代和岩性上具有很好的一致性,指示了石羊河中游地区约8500 cal yr BP-3000 cal yr BP以来的沉积过程。两剖面从底部到上部可分为六层:河流相沉积(F层)——河湖相沉积(E层)——湖相沉积(D层)——浅湖—风成沉积(C层)——风成沉积(B层)——风成沉积(A层),代表了不同沉积相及其转换过程。综合讨论沉积物岩性、沉积相和各种古环境代用指标认为:石羊河中游地区的沉积相体现了从河流相到湖相再到风成沉积物的变化过程,指示了全新世的干旱化过程。这与以往研究中认为石羊河流域全新世气候变化具有波动性的观点存在一定差异。因此,在研究沉积相变化的基础之上讨论沉积物的物理、化学和生物指标的含义,而非简单地研究这些指标的数值,是干旱区流域性气候变化对比研究的新视角。 相似文献
8.
9.
The upper Bashkirian-Moscovian Kapp KIre Formation is well-exposed in coastal cliff sections along the west coast of Bjørnøya, Svalbard. It is composed of stacked cycles of nixed siliciclastics and carbonates in the lower Bogevika Member and of cyclic shelf carbonates in the overlying Efuglvika Member. The uppermost Kobbebukta Member consists of shelf carbonates and syntectonic conglomerates and sandy turbidites. The shift in cycle types reflects an overall transgression of the region during the Moscovian combined with renewed tectonic activity and uplift of eastern Bjørnøya during the late Moscovian. Twelve carbonate facies and 6 siliciclastic facies are distinguished. The carbonate facies range from intertidal dolomitic mudstones with pseudomorphs after gypsum to subwavebase, intensely bioturbated wackestones. Most carbonates are deeper subtidal facies and shallow marine carbonate facies are only common in the transgressive part of mixed siliciclastic-carbonate cycles of the Bogevika Member. Incorporating the effects of high amplitude, high frequency glacioeustacy and active extensional tectonism, a dynamic model is developed to explain the spatial variability of facies observed within the Kapp Kke Formation. Observations from Bjørnøya are placed within the context of the regional structural and stratigraphic framework so that significance of the study to ongoing exploration efforts in the Barents Sea can be evaluated. Most important, our observations suggest that dolomitized, porous carbonate buildups are most likely to be found in the upper Moscovian succession in areas where accommodation space increased temporarily due to local tectonism. 相似文献
10.
Forward stratigraphic models usually display sediment types on simulated stratigraphic profiles as ‘facies’ defined only by their depth of deposition. More recently, ‘facies’ have been defined and displayed in terms of the dominant processes of deposition (e.g. in situ growth, pelagic production, turbidite deposition). Standard carbonate facies; that is, the Dunham classification, are defined by rock textures and grain composition that imply that a combination of processes acted together to generate a facies. For example, a bioclastic wackestone is a matrix‐supported rock containing up to 90% matrix and > 10% shelly grains. In terms of modelled processes, the muddy matrix could be generated by: (i) reworking of the shallow platform sediments, (ii) from pelagic deposition, or (iii) in situ production. A traditional depth of deposition process display would not be able to distinguish such a wackestone from any other facies deposited at this water depth and a majority process display would not combine reworked, pelagic muds and in situ contribution in one simulated ‘facies’. This paper introduces a new scheme that enables forward models to output simulated facies defined by a range of values for each of the controlling processes and thereby predicts rock textures within simulated stratigraphies. This approach has been applied to the Jurassic carbonate ramps of the Iberian Basin in northeastern Spain. It is shown to provide more accurate information about the processes that are being simulated, allowing more direct comparisons to be made with the facies observed in the field and providing potential for a more rigorous method for assessing the ‘goodness of fit’ of a simulated stratigraphy. 相似文献
11.
12.
Douglas J. Cant 《Basin Research》1991,3(2):51-62
Geometric analysis shows that the angle of migration of coastal sedimentary facies is a function of the relative sea-level change and the thickness of sediment deposited or eroded. The angle of facies migration compared to the slopes on the sediment surface determines the degree of facies preservation and stratigraphic relationships to the surrounding facies. Vertical facies successions generated by radial migration of environments show a great deal of variety because the sediment surface in both marine and non-marine areas is concave-up. Both regressive and transgressive sequences with non-erosive marine-nonmarine contacts can be generated. Transgression at a slightly lower angle can form a ravinement surface cut on non-marine deposits with onlapping barrier sands or shallow marine deposits. Regression with relative sea-level drop generates a minor erosion surface with baselapping isolated shoreline deposits. Disequilibrium conditions occur when sea level varies at a rate exceeding the ability of the system to supply or redistribute sediment, with resulting changes in surficial slopes. Onlapping and downlapping stratal relationships across erosion surfaces result because of differences in slopes between marine and non-marine environments. These discontinuities are generally less than one degree, but could possibly be recognized on high quality multichannel seismic lines. Most of these discontinuities are probably not regionally extensive enough to be regarded as sequence boundaries. Tectonic tilting or differential subsidence of strata during depositional hiatuses is necessary to generate true regional unconformities or sequence boundaries. Where facies climb with respect to horizontal, erosion surfaces produced only by this migration may cut across lithostratigraphic units at higher angles, up to 3 or 4 degrees. Low-angle erosion surfaces relevant to the scales of sequence stratigraphic studies may result only from facies migration, even during a period of relative sea-level rise. 相似文献
13.
末次冰期时存在入海的长江吗? 总被引:16,自引:0,他引:16
钻孔揭示璀长江三角洲地区存在自镇江、扬州向东南延伸至海的古河谷,其中的充填物为河流相、浅海相和三角洲相,沉积时间为冰后期,古河谷当形成于末次冰期低海面之时。研究地区巨大古河谷的存在说明末次冰期低海面时长江仍为入海河流。 相似文献
14.
J. W. Castle 《Basin Research》2001,13(4):397-418
ABSTRACT From study of Palaeozoic formations in the Appalachian foreland basin, a predictive stratigraphic model is proposed based on facies tract development during convergent-margin structural evolution. Five major facies tracts are recognized: shallow-water carbonates that formed during interorogenic quiescence and initial foreland subsidence; deep-water siliciclastics that accumulated in the proximal foreland basin during early collision; syn-collisional shallow-water siliciclastics; syn-collisional, channellized fluvial sandstones that aggraded in the proximal foreland; and progradational shoreline sandstones that were deposited in response to filling of the proximal foreland. Two other facies tracts that occur are organic-rich siliciclastics ('black shales'), which accumulated in oxygen-deficient areas of low clastic-sediment influx, and incised valley-fill deposits, which formed where subsidence rate was low.
Because the origin of each facies tract is dependent upon a unique combination of rate of accommodation change and rate of sediment supply, facies tract distribution is predictable from spatial and temporal patterns of subsidence and uplift associated with plate convergence. Alternating phases of thrust loading and quiescence caused fluctuations between underfilled and overfilled conditions during Palaeozoic evolution of the Appalachian basin. Along-strike variations in stratigraphic thickness, facies tract distribution, and development of unconformities in the Appalachian basin reflect the influence of structural irregularities along the collisional margin. In distal parts of the Appalachian foreland and in areas of structural recesses, eustatic influence on stratigraphic patterns is expressed more clearly than in areas of higher subsidence rate. 相似文献
Because the origin of each facies tract is dependent upon a unique combination of rate of accommodation change and rate of sediment supply, facies tract distribution is predictable from spatial and temporal patterns of subsidence and uplift associated with plate convergence. Alternating phases of thrust loading and quiescence caused fluctuations between underfilled and overfilled conditions during Palaeozoic evolution of the Appalachian basin. Along-strike variations in stratigraphic thickness, facies tract distribution, and development of unconformities in the Appalachian basin reflect the influence of structural irregularities along the collisional margin. In distal parts of the Appalachian foreland and in areas of structural recesses, eustatic influence on stratigraphic patterns is expressed more clearly than in areas of higher subsidence rate. 相似文献
15.
Ian J. Ferguson Anne‐Christine Da Silva Nancy Chow Annette D. George 《Basin Research》2021,33(1):312-341
Frasnian reef complexes along the northern margin of the Canning Basin in northwestern Australia evolved during rifting of the Fitzroy Trough. Geological investigations of the Frasnian Hull platform, which developed on an active tilted fault‐block, reveal significant lateral and vertical facies variations superimposed on prominent metre‐scale cyclicity. This study uses numerical analyses of facies and magnetic susceptibility data from three measured sections along the Hull platform to test whether a tectonic signal can be distinguished from eustatic and other signals. Geostatistical analysis of facies variations reveals an exponential distribution of thin (<3 m) facies, characteristic of stochastic depositional processes. Thick subtidal facies predominate in the Guppy Hills (GH) and southeastern Hull Range (SHR) sections near the hangingwall margin, and thick shallow‐subtidal to intertidal facies dominate the Horse Springs drillcore (HD 14) section near the footwall margin. Power and wavelet spectral analyses indicate a strong periodic component; Average Spectral Misfit and spectral optimisation methods confirm the presence of Milankovitch eccentricity signals and suggest the presence of obliquity and precession signals. However, the results also expose strong temporal and spatial variation providing evidence for tectonic control. Spectral analyses show strongest periodicity is recorded in short intervals that are not correlated across the platform and provide evidence of variations in sedimentation rate and hiatuses. Time series for the neighbouring GH and SHR sections show no overall statistical correlation, and Markov analysis indicates weakly ordered vertical facies transitions that do not correlate across the platform. Subtidal to intertidal facies data from HD 14 core suggest that at least 35% of the section is absent, almost obscuring the Milankovitch signal. The results indicate a complex set of controls on deposition on the Hull platform with local tectonic effects having produced spatio‐temporal moderation of the underlying eustatic signals and autogenic processes adding a localised stochastic response. 相似文献
16.
Compression of the thrust sheet underlying the central South Pyrenean Tremp-Graus Foreland Basin led to weak folding of the overlying basin fill during deposition of Eocene sediments. From the distribution of sedimentary facies and the presence of these folds, it is interpreted that thrusting of deep-seated competent units was accommodated by weak synsedimentary folding with a shorter wavelength at shallower levels. This led to differential subsidence at the surface but no unconformities are observed. The slower subsidence along the active anticlines locally influenced the distribution of sedimentary facies: lateral boundaries between different sedimentary facies are found to extend (sub)vertically up to more than 60 metres within narrow zones a few 100 m to 1.5 km wide. The growth folds thus led intermittently to the fixation of the position of facies boundaries, including a fixation of the coastline, over long periods (104 to 105 years). Sediment transport paths were also influenced by the slight folding of the surface. The orientation of the weak ‘en echelon’ anticlines and of related facies boundaries agrees with the inferred compressional pattern during the Eocene. Explanations for the regular occurrence of 50–60 m thick sedimentary cycles in terms of tectonic pulses or orbitally driven climatic changes and resulting pulses in sediment yield are discussed. For cycles of shorter length (10–15 m), with durations of the order of tens of thousands of years, it is inferred that these are due to regular climatic changes, probably related to orbital forcing, and resulting cyclic alternations of arid and wet periods. Such periodic changes of climate would have caused the intermittent waxing and waning of coarse-grained sediment 相似文献
17.
María Gabriela Mángano Luis Alberto Buatois Xiantao Wu Junmin Sun Guocheng Zhang 《Journal of Paleolimnology》1994,11(1):41-65
The Middle to Upper Triassic Tanzhuang Formation represents part of the infill of the early Mesozoic Jiyuan-Yima Basin. The upper part of this stratigraphic unit records deposition within prevailing shallow lake conditions. Well-developed sequences crop out near Jiyuan, western Henan Province, central China. Six sedimentary facies clustered into two facies assemblages were recognized in the lacustrine section. Facies assemblage 1 consists of stacked coarsening-upward sequences composed, from base to top, of organic-rich shales (facies E, type I), laminated siltstones (facies A) and current-rippled laminated sandstones (facies B). Units of assemblage 1 record progradation of small mouth-bar deltas within a perennial open lacustrine system under temperate and humid conditions. Facies assemblage 2 lacks a clear vertical pattern and consists of interbedded fine-grained carbonates and siltstones (facies C); deformed and wave-reworked sandstones (facies D); organic-rich shales (facies E, type II) and clayey mudstones (facies F). The assemblage also represents a perennial, hydrologically-open, shallow lacustrine system, but characterized by strong seasonal climatic control. Water stratification probably occurred in several periods of the lake history. Pangaean megamonsoonal influence is envisaged to explain the strong seasonality imprint evidenced toward the upper part of the Tanzhuang lacustrine column.This is the fourth paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits. 相似文献
18.
19.
In this study, measured outcrop sections and geolocated photomosaics are integrated with areal mapping of channel dimensions, degree of amalgamation, calculations of channel‐to‐floodplain ratios and sedimentary facies variability to study and quantify the channel and floodplain deposits in the Sunnyside Delta Interval of the Lower Eocene Green River Formation in the Uinta Basin, Utah. Vertically, sand content and bed thickness increases, due to an increase in the channel‐to‐floodplain ratio, channel size and the degree of channel amalgamation. Laterally, the channel‐to‐floodplain ratio, channel size, the degree of channel amalgamation and the sand content in channel facies decreases in the paleo‐downstream direction. Such vertical and lateral transitions identify the Sunnyside Delta Interval as a fluvial fan (or distributive fluvial system). However, the vertical and lateral transitions occur at multiple spatial scales, demonstrating considerable stratigraphic complexity as compared to the existing facies and architectural models suggested for fluvial megafans and distributive fluvial systems. The smallest‐scale transitions are identified as avulsion‐related packages that form the building blocks of the stratigraphy, whereas the intermediate‐ and largest‐scale transitions are suggested to be related to lobe and whole fan progradation respectively. This documented complexity indicates the significance of self‐organization in building fluvial fan stratigraphy, and demonstrates that changes in the degree of channel amalgamation or in channel‐to‐floodplain ratio are not linked to accommodation changes. On facies scale, an abundance of Froude supercritical‐flow and high‐deposition‐rate facies, in‐channel mud deposits, and in‐channel bioturbation and desiccation indicate deposition in rivers with highly variable discharge. Such discharge conditions suggest seasonally and inter‐annually variable precipitation conditions in the US Western Interior in the Early Eocene. 相似文献
20.
辽河三角洲地貌演化(英文) 总被引:1,自引:0,他引:1
This paper mainly analyzes the geomorphological changes of the tidal deposition in the Liaohe Estuary based on the multi-year
bathymetric charts in 1990, 1996, 2002 and 2005 and Landsat TM images in 1987, 1994, 2002 and 2005. Evolution of the tidal
depositional system during the past 20 years in the Liaohe River was studied on the basis of 50 boreholes drilling and 30
km shallow stratigraphic exploration from 2002 to 2005. The main tidal depositional body of the modern Liaohe River delta
is located in the Shuangtaizihe Estuary. The stratum within the depth of 10 m includes tidal bank facies, tidal channel facies
and neritic facies with paleo-delta facies underlying them. The sediments of tidal bank facies are mainly composed of sand
and silt with siltation load and suspended load of about 50% respectively in proportion. The sediment of tidal channel facies
and neritic facies is composed of clayey silt and silty clay which belongs to suspended load. The study area was a small bay
between the old Daliaohe River, the old Dalinghe River and the Raoyanghe River complex delta since the Holocene to 1896. Many
tidal banks formed and expanded rapidly after the Shuangtaizihe River was excavated by labor in 1896. The runoff and sediment
discharge have decreased since the construction of brake at the Shuangtaizihe River in 1958.The Shuangtaizihe Estuary is in
the state of deposition as a whole whose tidal bank is increasing and expanding southward, westward and northward. The maximum
expansion speed is 87 to 683 m/a and the mean depositional rate is 0.189 m/a. Erosion occurred in some part of tidal bank
with average erosional rate of 0.122 m/a. The tidal channel was filled up with sediment at a migration speed of 48–200 m/a.
Geomorphologic changes have happened under the combined influences of runoff, ocean dynamics and human activities. The main
source of sediment changes from river sediment to sediment driven by tidal current and longshore current. 相似文献