Facies and depositional model of alluvial fan dominated by episodic flood events in arid conditions: An example from the Quaternary Poplar Fan,north-western China

Alluvial fans are usually constructed through episodic flood events. Despite the significance of these ephemeral floods on the morphodynamics of alluvial fans, depositional responses to the variations in flood conditions are still poorly documented. This greatly limits the ability to interpret ancient sedimentary successions of fans and the associated flood hydrodynamics. The Quaternary Poplar Fan from endorheic Heshituoluogai Basin provides an optimal case for addressing this issue. Based on the variations in facies associations and flood conditions, three depositional stages – namely; lobe building stage, channel building stage and the abandonment stage – are identified. During the lobe building stage the Poplar Fan is predominately constructed through incised channel flood, sheetflood and unconfined streamflood, with coeval development of distal surficial ephemeral ponds. The channel building stage is characterized by the development of gravelly braided rivers. However, only scour pool fill deposits are preferentially preserved in the Poplar Fan. During the abandonment stage, erosional lags and aeolian sands randomly occur throughout the fan, while gully deposits can only be found in the distal fan. The distinctive facies architecture of the Poplar Fan is likely to be the result of periodicity of climate fluctuations between wetter and drier conditions during the Late Pleistocene to Holocene. The ephemeral floods formed under wetter conditions usually show high discharge and sediment concentrations which facilitate the lobe building processes. During the drier periods, only gravelly braided rivers can be developed through ephemeral floods as the intensity and frequency in precipitation, discharge and sediment concentrations of the flood flows significantly decrease. The abandonment stage of the fan may occur between recurring flood episodes or during the driest periods. Furthermore, the long-term (10⁵ to 10⁶ year) geomorphic evolution of the Poplar Fan shows the influence of tectonic activities. The ongoing thrust uplift tectonic activities have caused destruction of the fan but can also facilitate the fan-head trench/incision of the fan, which in turn facilitate the progradation of the fan. This study proposes a new depositional model for alluvial fans constructed through episodic flood events, which shows the character of both sheet-flood dominated and stream-flow dominated end members of alluvial fans. These findings supplement the understanding of the variability of the alluvial fans and provide means to characterize rock record of alluvial fans and their associated flood and climate conditions.     

Deep-sea fan pinch-out geometries and their relationship to fan architecture,Tanqua Karoo basin (South Africa)

Exceptional exposures of Permian basin floor fans (fans 3, 4) and a slope fan (fan 5) in the Tanqua Karoo foreland basin of South Africa have enabled an investigation of the relation between the pinch-out geometries and fan architecture. The pinch-out geometry of fan 3 is characterized by the down dip transition from thin to medium bedded sheet deposits to pinch-out fingers, which are overlain by younger prograding sheet deposits. This geometry reflects the progradational stacking pattern of the fan. In contrast, the fan 4 pinch-out fingers consist of stacked channel fills in the same conduit. This pinch-out configuration relates to the dominant aggradational style observed on the mid and distal parts of fan 4. Fan 5 represents a slope fan comprising an axial channel conduit, which branches down slope into three distributary channels. The distal fan is characterized by larger channel fills, which may represent bypass channels to other basin floor fans. The very thick-bedded nature of the youngest channel fill unit suggests early bypass followed by retrogradation as indicated by the presence of thinner bedded heterolithic channel fill deposits along the axial conduit. Although some of the massive pinch-out channels exhibit basal scour, their depositional morphology suggests that they mainly originated due to the infill of subtle topographic depressions by low concentration turbidity currents. Instead of describing these features as channel fills, the use of the term pinch-out fingers is preferred.     

塔里木盆地西部一间房露头区奥陶系台缘储层沉积体系分析

碳酸盐岩台地边缘优质储层相带预测一直是石油勘探家关注的焦点,露头沉积体系精细结构分析及其储集性能研究是总结预测模型的一把关键钥匙。在塔里木盆地西部一间房露头区,通过详细的野外地质调查、沉积体横向追踪与对比、典型沉积体系剖面写实、系统取样和室内测试分析等方法,对中奥陶统一间房组台缘生物礁-滩沉积体系、上奥陶统良里塔格组底部的台缘斜坡-斜坡扇沉积体系进行了系统的沉积体系内部成因相构成及其储集性能研究。研究认为台缘沉积体系具有复杂的内部构成,其成因相具有相对固定的空间配置格架和品质迥异的储集性能。在台缘靠近台地一侧往往发育生物礁-滩沉积体系,由生物礁、生物碎屑滩和台缘背景沉积等3种成因相组合构成。生物碎屑滩产出于生物礁周围,礁前则具有特征的砾质滩。由内侧滩向外侧滩沉积物颗粒变细、分选性变差、生屑含量和亮晶胶结物减少。而在台缘靠近盆地一侧,则往往台缘斜坡-斜坡扇沉积体系,主要由斜坡、斜坡扇、扇面水道和滑塌体等4种成因相组合构成。扇面水道通常切割斜坡扇,滑塌体周围往往伴生有小型斜坡扇体。由斜坡扇或者扇面水道的近端向远端,沉积物由砾质逐渐转变为砂质。在上述两种台缘沉积体系中,礁前内侧砂质滩和礁后内侧砂质滩、远端砂质斜坡扇具有良好的储层品质。比较而言,台缘生物礁-滩沉积体系的潜在储集性能总体上优于台缘斜坡-斜坡扇沉积体系。     

Flow properties of turbidity currents in Bute Inlet, British Columbia

Bute Inlet, a fiord along the southwestern coast of British Columbia, Canada, includes a sea-floor sedimentation system 70 km in length which resembles those developed on some large submarine fans. Turbidity currents originate at the head of the flord on the submerged delta fronts of the Homathko and Southgate rivers. They move downslope for about 30 km within a single large incised channel, spill onto a depositional area termed the channel lobe complex, and finally spread out over a low-relief distal splay area that passes 55 km downslope into a flat basin floor. During the present study, turbidity currents in Bute Inlet were studied using sea-floor morphology, bottom sediment distribution, and in-situ instrument packages. The mean velocities of the most recent flows, estimated from surface sediment grain size, has varied between 100–120 cm s^–1 in the incised channel, 20–50 cms^–1 in the channel lobe complex, and < 5 cm s^–1 on the basin floor. Velocities based on channel morphology are poorly constrained but are in the range of 160-425 cm s^–1 in the upper part of the incised channel and 66 cm s^–1 in the lower channel. Calculated flow densities range from 1.049 to 1.028g cm^–3. Turbidity flows monitored in 1986 using submerged instrument packages exceeded 32 m in thickness in the upper part of the incised channel, where the maximum measured velocity was 330 cm s^–1. At the head of the channel lobe complex the maximum velocity had declined to 75 cm s^–1. The density of the monitored flows is estimated at 1.025-1.03g cm^–3. The cored sediments and channel morphology yield estimates of mean flow velocities that are generally greater than those measured by the in-situ instrument packages and estimated from modern surface sediments. The former suggest past flow velocities up to 500 cm s^–1 in the incised channel, about 20 cm s^–1 in spillover deposits along the lower part of the incised channel, and 100-140 cm s^–1 in the distal splay. The contrast between the velocities of modern and past flows suggests that past flows may have been considerably larger and more energetic than those presently occurring in Bute Inlet. The size properties of sediments in the monitored turbidity flows suggest a strong vertical size gradient in the suspended load during transport. The surface and cored sediments fine downslope from the channel lobe complex to distal splay area. Distinctive sedimentary sequences are recognized in cores from the spillover lobes, channel lobe complex, distal splay, and basin floor depositional areas. Many individual turbidites grade downslope from massive T_a divisions in the channel lobe complex and probably in the incised channel to T_a divisions overlain by slurried divisions on the distal splay and largely slurried beds on the basin floor. These facies suggest that individual currents commonly evolve from largely cohesionless suspensions in the incised channel and channel lobe complex to dilute cohesive slurries downslope on the distal splay and basin floor. Many flows in Bute Inlet fail to develop a traction state of sedimentation and the resulting turbidites lack well-developed T_b. T_c, and T_d divisions.     

Spatial and temporal evolution of a terminal fluvial fan system: the Permian Organ Rock Formation, South-east Utah, USA

The recognition of terminal fluvial systems, otherwise termed 'terminal fans' or 'distributary fluvial fan systems', preserved in the ancient rock record is based primarily on the recognition of facies characteristics indicative of a progressive downstream decrease in: (i) fluvial discharge; (ii) channel depth and width; (iii) lateral and vertical connectivity of channel-fill elements; and (iv) evidence for channellized flow and a systematic increase in: (i) evidence for sheetflood deposition; (ii) aeolian and/or playa deposits; and (iii) channel bifurcation. However, despite these criteria having been applied previously to a variety of outcrop successions, there is still no unifying facies model that adequately accounts for the complex stratigraphic architectural relationships expected for such systems, based on the varied styles of fluvial activity and system interaction known from modern examples. Moreover, few previous studies have given significant consideration to the long-term temporal evolution of terminal fluvial fans. These issues are addressed by this study of the Permian (Leonardian/Artinskian) Organ Rock Formation of the Paradox Basin, South-east Utah. A detailed stratigraphic framework based on 84 sedimentary logs demonstrates proximal to distal variations in sedimentary style. Integration of these data with high-resolution architectural panels depicting the geometry and facies characteristics of individual fluvial elements has enabled the development of a series of depositional models that account for both the spatial and temporal evolution of the system and which are representative of: (i) initial progradation of the fluvial system into the Paradox foreland basin; (ii) retreat of the fluvial system and expansion of a distal aeolian dune system; (iii) the final phase of fluvial progradation following aeolian dune deflation; and (iv) the final retrogradation of the fluvial system back towards the hinterland.     

Calciclastic submarine fans: An integrated overview

Calciclastic submarine fans are rare in the stratigraphic record and no bona fide present-day analogue has been described to date. Possibly because of that, and although calciclastic submarine fans have long intrigued deep-water carbonate sedimentologists, they have largely been overlooked by the academic and industrial communities. To fill this gap we have compiled and critically reviewed the existing sedimentological literature on calciclastic submarine fans, thus offering an updated view of this type of carbonate slope sedimentary system.Calciclastic submarine fans range in length from just a few to more than 100 km. Three different types can be distinguished: (1) Coarse-grained, small-sized (< 10 km) fans, which are characterized by the abundance of calcirudites and the scarcity of mud. They have relatively long leveed channels and small radial lobes. (2) Medium-grained, medium-sized fans are typified by the abundance of calcarenites and lesser amounts of calcirudites and mud. They have a tributary network of slope gullies, which merge to form a leveed channel that opens to the main depositional site, characterized by extensive lobes and/or sheets, which eventually pass into basinal deposits through a narrow fan-fringe area. These fans are between 10 and 35 km in length. (3) Fine-grained, large-sized fans are rich in calcarenites and mud, but poor in calcirudites. They have wide and long slope channels that feed very extensive calciturbiditic sheets, the total length always exceeding 50 km and generally being close to 100 km. In terms of grain-size distribution the three fan types compare well with sand/gravel-rich, mud/sand-rich and mud-rich siliciclastic submarine fans, respectively. However, they show notable differences in terms of size and sedimentary architecture, a reflection of the different behaviour of their respective sediment gravity flows.Most calciclastic submarine fans were formed on low-angle slopes and were sourced from distally steepened carbonate ramps subjected to high-energy currents. Under these conditions shallow-water loose grainy sediments were transferred to the ramp slope and eventually funnelled into the submarine fan by sediment gravity flows. These conditions seem to have been more easily met on leeward margins in which the formation of reefs was hampered by cool waters, nutrient enrichment or oligophoty. Another circumstance that contributes to the transfer of shallow-water sediments to the distal ramp slope is a low sea level, forcing the carbonate factory closer to the slope break and destabilizing sediments by increased pore-water pressure. However, the most important factor controlling the development of calciclastic submarine fans was the existence of an efficient funnelling mechanism forcing sediment gravity flows to merge downslope and build up a point-sourced sedimentary accumulation. In most cases this occurred through a major slope depression associated with tectonic structures, an inherited topography, or large-scale mass failures.     

Triassic carbonate submarine fans along the Arabian platform margin, Sumeini Group, Oman

ABSTRACT The Sumeini Group formed along the passive continental margin slope that bounded the northeastern edge of the Arabian carbonate platform. With the initial development of this passive continental margin in Oman during Early to Middle Triassic time (possibly Permian), small carbonate submarine fans of the C Member of the Maqam Formation developed along a distally steepened slope. The fan deposits occur as several discrete lenticular sequences of genetically related beds of coarsegrained redeposited carbonate (calciclastic) sediment within a thick interval of basinal lime mudstone and shale. Repeated pulses of calciclastic sediment were derived from ooid shoals on an adjacent carbonate platform and contain coarser intraclasts eroded from the surrounding slope deposits. Sediment gravity flows, primarily turbidites with lesser debris flows and grain flows, transported the coarse sediments to the relatively deep submarine fans. Channel erosion was a major source of intraformational calcirudite. Two small submarine fan systems were each recurrently supplied with calciclastic sediment derived from point sources, submarine canyons. The northern fan system retrogrades and dies out upsection. The southern fan system was apparently longer-lived; calciclastic sediments in it are more prevalent and occur throughout the section. The proximal portions of this fan system are dominated by channelized beds of calcirudite which represent inner- to mid-fan channel complexes. The distal portions include mostly lenticular, unchannelized beds of calcarenite, apparently mid- to outer-fan lobes. Carbonate submarine fans appear to be rare in the geological record in comparison with more laterally continuous slope aprons of coarse redeposited sediment. The carbonate submarine fans of the C Member apparently formed by the funnelling of coarse calciclastic sediment into small submarine canyons which may have developed due to rift and/or transform tectonics. The alternation of discrete sequences of calciclastic sediment with thick intervals of ‘background’ sediment resulted from either sea-level fluctuations or pulses of tectonic activity.     

Postglacial colluvium in western Norway: depositional processes, facies and palaeoclimatic record

The postglacial Quaternary colluvial systems in western Norway are arrays of steep fans, often coalescing into aprons, developed along the slopes of valley sides and fjord margins. The coarse debris, derived from weathered gneissic bedrock and its glacial-till mantle, varies from highly immature to mature. The depositional processes are mainly avalanches, ranging from rockfalls and debrisflows to snowflows, but include also waterflow and debris creep. The mechanics and sedimentary products of these processes are discussed, with special emphasis on snow avalanches, whose role as an agent of debris transport is little-known to sedimentologists. The subsequent analysis of sedimentary successions is focused on colluvial-fan deltas, which are very specific, yet little-studied, coastal depositional systems. The stratigraphic variation and depositional architecture of the colluvial facies assemblages, constrained by abundant radiometric dates, are used to decipher the signal of regional climatic changes from the sedimentary record. The stratigraphic data from two dozen local colluvial successions are compiled and further compared with other types of regional palaeoclimatic proxy record. The analysis suggests that the colluvial systems, although dependent upon local geomorphic conditions, have acted as highly sensitive recorders of regional climatic changes. The study as a whole demonstrates that colluvial depositional systems are an interesting and important frontier of clastic sedimentology.     

The frequency and periodicity of preserved turbidites in submarine fans as a quantitative record of tectonic uplift in collision zones

The frequency and periodicity of preserved graded turbidite cycles in submarine fans in the Coral Sea and Sea of Japan are correlated to times of tectonic uplift in response to major collisions in the Owen-Stanley Range of Papua and the Hida Range of Japan, respectively. Large frequencies and shorter-term periodicities of turbidites at DSDP Site 210 were coeval with early Pliocene maximum tectonic-uplift rates which occurred in the Owen-Stanley Range in response to obduction. Similarly, large frequencies and shorter-term periodicities of turbidites at Site 299 (Toyama Submarine Fan) were coeval with the late Pleistocene uplift in the Hida Range; this uplift of 1000 to 1500 m occurred in response to collision tectonics. In both cases, trends of increasing frequencies and towards shorter-term periodicities of preserved turbidite depositional events correlate to trends of increasing rates of tectonic uplift.The role of sea-level fluctuations on changing denudation rates in these two collision zones is secondary. At Site 210, larger frequencies and short-term periodicities of preserved turbidites were coeval with early Pliocene high stands of sea level, whereas at Site 299, Pleistocene sea-level fluctuations are considered minor because at low stands of sea level, both relief and denudation rates were increased by about ten to 14%. At Site 286 (New Hebrides Basin), Eocene turbidite deposition is coeval with high stands of sea level, whereas at Site 297 (Northern Shikoku Basin), turbidite deposition was coeval with both rising and falling sea level.Analysis of both frequency and periodicity of turbidites by fan subenvironment at Site 299 indicates a record of continuous deposition, and maintainance of frequency and periodicity trends controlled by tectonic uplift. Late Pleistocene channel and overbank deposits showed periodicity differences of less than 28% of an order of magnitude, whereas Miocene-Pliocene overbank and distal turbidite periodicities differed by a 19% order of magnitude. Greater differences in magnitude occurred between distal turbidites or early Pleistocene age and Pliocene age than between Miocene-Pliocene overbank and distal turbidite deposition with a magnitude difference of 860%. These findings suggest that shifting depocenters and differences in sedimentation history in subenvironments of submarine fans are secondary to the role of tectonic uplift in this particular case.The minimal rate of tectonic uplift required to generate deep-sea fan turbidities appears to be approximately 400 m/million years. This figure is tentative and is based on very few observation points.Frequency and periodicity of preserved turbidite cycles in submarine fans in active continental margins and ancient counterparts should provide an independent measurement of rates and timing of tectonic uplift, particularly in collision terrains. Because this sediment parameter is a record of a single process from a single source and a record of “event stratigraphy”, its usage is preferable over standard and bulk sediment accumulation rates determined from age depth curves.     

Geoarchaeology and geochronology of pluvial Lake Chapala,Baja California,Mexico

Stratigraphic exposures in natural profiles, archaeological excavation units, backhoe trenches, and an uncased water well from the Laguna Seca Chapala basin in the Central Desert of Baja California (29°N, 115°W) record lake level and climate changes and provide a context for prehistoric occupation predating 9070 yr B.P. and extending through the Holocene. Lithofacies analysis points to the presence of a large (ca. 66 km²) lake prior to 9070 yr B.P., which desiccated by 7.45 ka yr B.P., promoting rapid dune growth. New dating and redefinition of stratigraphic units in the basin refutes earlier models of lacustrine history and prehistoric occupation including a proposed series of Pleistocene lake levels with associated cultural occupations. The geologic record from the Laguna Seca Chapala basin compares well with other paleoenvironmental records in southwestern North America, supporting interpretations of wet and cool conditions in Baja California during the late Pleistocene and early Holocene. © 2003 Wiley Periodicals, Inc.     

Traces of historical tropical cyclones and tsunamis in the Ashburton Delta (north‐west Australia)

Although the north‐western coast of Western Australia is highly vulnerable to tropical cyclones and tsunamis, little is known about the geological imprint of historic and prehistoric extreme wave events in this particular area. Despite a number of site‐specific difficulties such as post‐depositional changes and the preservation potential of event deposits, both tropical cyclones and tsunamis may be inferred from the geomorphology and the stratigraphy of beach ridge sequences, washover fans and coastal lagoons or marshes. A further challenge is the differentiation between tsunami and storm deposits in the geological record, particularly where modern deposits and/or historical reports on the event are not available. This study presents a high‐resolution sedimentary record of washover events from the Ashburton River delta (Western Australia) spanning approximately the last 150 years. A detailed characterization of event deposits is provided, and a robust chronostratigraphy for the investigated washover sequence is established based on multi‐proxy sediment analyses and optically stimulated luminescence dating. Combining sedimentological, geochemical and high‐resolution optically stimulated luminescence data, event layers are assigned to known historical events and tropical cyclone deposits are separated from tsunami deposits. For the first time, the 1883 Krakatoa and 1977 Sumba tsunamis are inferred from sedimentary records of the north‐western part of Western Australia. It is demonstrated that optically stimulated luminescence applied in coastal sedimentary archives with favourable luminescence characteristics can provide accurate chronostratigraphies even on a decadal timescale. The results contribute to the data pool of tropical cyclone and tsunami deposits in Holocene stratigraphies; however, they also demonstrate how short‐lived sediment archives may be in dynamic sedimentary environments.     

Downstream changes of large-scale bedforms in turbidites around the Valencia channel mouth,north-west Mediterranean: implications for palaeoflow reconstruction

Side-scan sonar, seismic and core data are used to identify mega-flutes, transverse and ‘V’ shaped bedforms in turbidites around the Valencia channel mouth, north-west Mediterranean. Long-range side-scan sonar data reveal a broad, curved, asymmetric, channel, that widens and terminates downfan. The western channel bank near the channel mouth has been partly eroded by turbidity currents that spilled out of the channel. Transverse bedforms on the east of the channel floor are interpreted as antidunes and, if this interpretation is correct, they indicate that the flow was probably supercritical at least locally within the channel. Trains of mega-flutes, are incised into coarse-grained sediments of the channel floor near the channel mouth. The association of mega-flutes and antidunes is thought to be diagnostic of channel–lobe transitions on deep-sea fans. The mega-flutes pass downfan into an area of streaks that diverge at up to 45° and indicates flow expansion from the channel mouth. About 75 km downfan from the channel mouth, deep-towed side-scan data record transverse bedforms (interpreted as antidunes) passing downfan into an area covered by ‘V’ shaped bedforms with upflow pointing apices (named chevrons here). The chevrons are commonly c. 200 m from limb to limb and c. 2 m in amplitude with flow-parallel wavelengths of c. 400 m. We propose that chevrons were formed by a strong, probably supercritical (or near critical) turbidity current spreading from the channel mouth and flowing towards the Balearic Abyssal Plain. Thinning of the turbidity current, resulting from flow spreading would allow the Froude number to remain high up to 100 km from the channel mouth and could explain the observed reduction in antidune wavelength.     

Geomorphic analysis of Hohokam settlement patterns on alluvial fans along the western Flank of the Tortolita Mountains,Arizona

Geoarchaeological investigations of the alluvial piedmont or bajada emanating from the Tortolita Mountains, Arizona, show that the distribution of Hohokam sites apparent from the surface is complete and undisturbed by geological processes. Late Holocene geomorphic processes and their resultant deposits on the bajada affected the location of prehistoric Hohokam agricultural settlements. Hohokam settlements were commonly situated on small alluvial fans dominated by sheetwash processes and deposition of fine-grained alluvium, where floodwater farming could be easily pursued with little modification of the natural surface. Large alluvial fans, dominated by channel processes and coarse-grained alluvium were avoided by the Hohokam farmer because these areas were less suitable for floodwater farming.     

海底扇沉积相模式、沉积过程及其沉积记录的指示意义

海底扇是由沉积物重力流形成的海底沉积体。其分类学和相模式研究表明,海底扇主要由海底水道、溢岸及朵叶体等沉积单元构成。然而古代和现代海底扇沉积均无法由单一的通用相模式进行解释。以粒度差异所建立的相模式类型涵盖了多方面信息,相对简单实用。海底扇的触发机制主要包括海底沉积物失稳、洪水型异重流、海洋动力过程及复合成因机制等类型。海底扇的主导流体类型（碎屑流与浊流）、海底地貌形态（限制性与非限制性）及海洋动力条件（底流作用）深刻影响了海底扇的沉积作用、平面形态及空间组合特征,整体上分为三类。其中,浊流沉积主导的海底扇在非限制性海底环境中主要表现为扇状或指状形态,在限制性海底环境中则直接受控于盆地的地貌形态;碎屑流沉积主导的海底扇以块体搬运为特征,平面上表现为舌状和叶状展布形态;底流与重力流共同作用形成的混合型海底扇朵叶体沿底流流向侧向偏转,部分受底流改造沉积形成孤立漂积丘状形态。海底扇沉积物记录了环境信号从“源”到“汇”传输效率和保存程度,对构造变形和古气候变化具有重要的指示作用。人类世以来的现代海底扇沉积物同时也是深海微塑料、陆源有机碳的重要储库,定量评估其丰度特征对于环境评价、污染治理与管控及全球碳循环均具有深远的现实意义。     

Stream-dominated alluvial fan and lacustrine depositional systems in Cenozoic strike-slip basins, Denali fault system, Yukon Territory, Canada

Ancient stream-dominated (‘wet’) alluvial fan deposits have received far less attention in the literature than their arid/semi-arid counterparts. The Cenozoic basin fills along the Denali fault system of the northwestern Canadian Cordillera provide excellent examples of stream-dominated alluvial fan deposits because they developed during the Eocene-Oligocene temperate climatic regime in an active strike-slip orogen. The Amphitheatre Formation filled several strike-slip basins in Yukon Territory and consists of up to 1200 m of coarse siliciclastic rocks and coal. Detailed facies analysis, conglomerate: sandstone percentages (C:S), maximum particle size (MPS) distribution, and palaeocurrent analysis of the Amphitheatre Formation in two of these strike-slip basins document the transition from proximal, to middle, to distal and fringing environments within ancient stream-dominated alluvial-fan systems. Proximal fan deposits in the Bates Lake Basin are characterized by disorganized, clast-supported, boulder conglomerate and minor matrix(mud)-supported conglomerate. Proximal facies are located along the faulted basin margins in areas where C:S = 80 to 100 and where the average MPS ranges from 30 to 60 cm. Proximal fan deposits grade into middle fan, channelized, well organized cobble conglomerates that form upward fining sequences, with an average thickness of 7 m. Middle fan deposits grade basinward into well-sorted, laterally continuous beds of normally graded sandstone interbedded with trough cross-stratified sandstone. These distal fan deposits are characteristic of areas where C:S = 20 to 40 and where the average MPS ranges from 5 to 15 cm. Fan fringe deposits consist of lacustrine and axial fluvial facies. Palaeogeographic reconstruction of the Bates Lake Basin indicates that alluvial-fan sedimentation was concentrated in three parts of the basin. The largest alluvial-fan system abutted the strike-slip Duke River fault, and prograded westward across the axis of the basin. Two smaller, coarser grained fans prograded syntaxially northward from the normal-faulted southern basin margin. Facies analysis of the Burwash Basin indicates a similar transition from proximal to distal, stream-dominated alluvial fan environments, but with several key differences. Middle-fan deposits in the Burwash Basin define upward coarsening sequences 50 to 60 m thick composed of fine-grained lithofacies and coal in the lower part, trough cross-stratified sandstone in the middle, and conglomerate in the upper part of the sequence. Upward-coarsening sequences, 90–140 m thick, also are common in the fan fringe lacustrine deposits. These sequences coarsen upward from mudstone, through fine grained, ripple-laminated sandstone, to coarse grained trough cross-stratified sandstone. The upward-coarsening sequences are basinwide, facies independent, and probably represent progradation of stream-dominated alluvial-fan depositional systems. Coal distribution in the Amphitheatre Formation is closely coupled with predominant depositional processes on stream-dominated alluvial fans. The thickest coal seams occur in the most proximal part of the basin fill and in marginal lacustrine deposits. Coal development in the intervening middle and distal fan areas was suppressed by the high frequency of unconfined flow events and lateral channel mobility.     

Anatomy and facies distribution of terminal lobes in ephemeral fluvial successions: Jurassic Tordillo Formation,Neuquén Basin,Argentina

In terminal fluvial-fan systems, characteristic proximal to distal variations in sedimentary architectures are recognized to arise from progressive downstream loss of water discharge related to both infiltration and evaporation. This work aims to elucidate downstream trends in facies and architecture across the medial and distal zones of terminal-fan systems, which record transitions from deposits of channel elements to lobe-like and sheet-like elements. This is achieved via a detailed characterization of ancient ephemeral fluvial deposits of the well-exposed Kimmeridgian Tordillo Formation (Neuquén Basin, Argentina). The fine sand-prone and silt-prone succession associated with the medial to distal sectors of the system has been studied to understand relationships between depositional processes and resulting architectures. Facies and architectural-element analyses, and quantification of resulting sedimentological data at multiple scales, have been undertaken to characterize sedimentary facies, facies transitions, bed types, architectural elements and larger-scale architectural styles. Eight bed types with distinct internal facies transitions are defined and interpreted in terms of different types of flood events. Channelized and non-channelized architectural elements are defined based on their constituent bed types and their external geometry. The most common elements are terminal lobes, which are composite bodies within which largely unconfined sandy deposits are stacked in a compensational manner; a hierarchical arrangement of internal components is recognized. Proximal feeder-channel avulsion events likely controlled the evolution of terminal-lobe elements and their spatiotemporal shifts. Stratigraphic relations between architectural elements record system-wide trends, whereby a proximal sector dominated by channel elements passes downstream via a gradational transition to a medial sector dominated by sandy terminal-lobe elements, which in turn passes further downstream to a distal sector dominated by silty terminal lobe-margin and fringing deposits. This work enhances current understanding of the stratigraphic record of terminal fluvial systems at multiple scales, and provides insight that can be applied to predict the facies and architectural complexity of terminal fluvial successions.     

A combined study of radar facies,lithofacies and three‐dimensional architecture of an alpine alluvial fan (Illgraben fan,Switzerland)

Alluvial fans serve as useful archives that record the history of depositional and erosional processes in mountainous regions and thus can reveal the environmental controls that influenced their development. Economically, they play an important role as groundwater reservoirs as well as host rocks for hydrocarbons in deeply buried systems. The interpretation of these archives and the evaluation of their reservoir architecture, however, are problematic because marked heterogeneity in the distribution of sedimentary facies makes correlation difficult. This problem is compounded because the accumulated sedimentary deposits of modern unconsolidated fan systems tend to be poorly exposed and few such systems have been the focus of investigation using high‐resolution subsurface analytical techniques. To overcome this limitation of standard outcrop–analogue studies, a geophysical survey of an alpine alluvial fan was performed using ground‐penetrating radar to devise a scaled three‐dimensional subsurface model. Radar facies were classified and calibrated to lithofacies within a fan system that provided outcropping walls and these were used to derive a three‐dimensional model of the sedimentary architecture and identify evolutionary fan stages. The Illgraben fan in the Swiss Alps was selected as a case study and a network of ca 60 km sections of ground‐penetrating radar was surveyed. Seven radar facies types could be distinguished, which were grouped into debris‐flow deposits and stream‐flow deposits. Assemblages of these radar facies types show three depositional units, which are separated by continuous, fan‐wide reflectors; they were interpreted as palaeo‐surfaces corresponding to episodes of sediment starvation that affected the entire fan. An overall upward decline in the proportion of debris‐flow deposits from ca 50% to 15% and a corresponding increase in stream‐flow deposits were identified. The uppermost depositional unit is bounded at its base by a significant incision surface up to 700 m wide, which was subsequently filled up mostly by stream‐flow deposits. The pronounced palaeo‐surfaces and depositional trends suggest that allocyclic controls governed the evolution of the Illgraben fan, making this fan a valuable archive from which to reconstruct past sediment fluxes and environmental change in the Alps. The results of the integrated outcrop–geophysical approach encourage similar future studies on fans to retrieve their depositional history as well as their potential reservoir properties.     

Dimensions and architecture of late Pleistocene submarine lobes off the northern margin of East Corsica

Sandy lobe deposits on submarine fans are sensitive recorders of the types of sediment gravity flows supplied to a basin and are economically important as hydrocarbon reservoirs. This study investigates the causes of variability in 20 lobes in small late Pleistocene submarine fans off East Corsica. These lobes were imaged using ultra‐high resolution boomer seismic profiles (<1 m vertical resolution) and sediment type was ground truthed using piston cores published in previous studies. Repeated crossings of the same depositional bodies were used to measure spatial changes in their dimensions and architecture. Most lobes increase abruptly down‐slope to a peak thickness of 8 to 42 m, beyond which they show a progressive, typically more gradual, decrease in thickness until they thin to below seismic resolution or pass into draping facies of the basin plain. Lobe areas range from 3 to 70 km² and total lengths from 2 to 14 km, with the locus of maximum sediment accumulation from 3 to 28 km from the shelf‐break. Based on their location, dimensions, internal architecture and nature of the feeder channel, the lobes are divided into two end‐member types. The first are small depositional bodies located in proximal settings, clustered near the toe‐of‐slope and fed by slope gullies or erosive channels lacking or with poorly developed levées (referred to as ‘proximal isolated lobes’). The second are larger architecturally more complex depositional bodies deposited in more distal settings, outboard more stable and longer‐lived levéed fan valleys (referred to as ‘composite mid‐fan lobes’). Hybrid lobe types are also observed. At least three hierarchical levels of compensation stacking are recognized. Individual beds and bed‐sets stack to form lobe‐elements; lobe‐elements stack to form composite lobes; and composite lobes stack to form lobe complexes. Differences in the size, shape and architectural complexity of lobe deposits reflect several inter‐related factors including: (i) flow properties (volume, duration, grain‐size, concentration and velocity); (ii) the number and frequency of flows, and their degree of variation through time; (iii) gradient change and sea floor morphology at the mouth of the feeder conduit; (iv) lobe lifespan prior to avulsion or abandonment; and (v) feeder channel geometry and stability. In general, lobes outboard stable fan valleys that are connected to shelf‐incised canyons are wider, longer and thicker, accumulate in more basinal locations and are architecturally more complex.     

Morphology and recent history of the Rhone River Delta in Lake Geneva (Switzerland)

The current topographic maps of the Rhone Delta—and of Lake Geneva in general—are mainly based on hydrographic data that were acquired during the time of F.-A. Forel at the end of the nineteenth century. In this paper we present results of a new bathymetric survey, based on single- and multi-beam echosounder data. The new data, presented as a digital terrain model, show a well-structured lake bottom morphology, reflecting depositional and erosional processes that shape the lake floor. As a major geomorphologic element, the sub-aquatic Rhone Delta extends from the coastal platform to the depositional fans of the central plain of the lake at 310 m depth. 9 canyons cut the platform edge of the delta. These are sinuous (“meandering”) channels formed by erosional and depositional processes, as indicated by the steep erosional canyon walls and the depositional levees on the canyon shoulders. Ripples or dune-like morphologies wrinkle the canyon bottoms and some slope areas. Subaquatic mass movements are apparently missing on the delta and are of minor importance on the lateral lake slopes. Morphologies of the underlying bedrock and small local river deltas are located along the lateral slopes of Lake Geneva. Based on historical maps, the recent history of the Rhone River connection to the sub-aquatic delta and the canyons is reconstructed. The transition from three to two river branches dates to 1830–1840, when the river branch to the Le Bouveret lake bay was cut. The transition from two to one river branch corresponds to the achievement of the correction and dam construction work on the modern Rhone River channel between 1870 and 1880.