Aeolian deposition of dust over hills: the effect of dust grain size on the deposition pattern

Wind tunnel experiments were conducted to investigate the effects of topography on the grain size characteristics of aeolian dust deposits. Experiments were performed on three isolated hills having various size and aspect ratios. The longitudinal profile of the median grain diameter was investigated for each hill. The longitudinal dust deposition profile was also studied for nine grain size classes of between 10 and 104 µm, as were wind and dust concentration profiles in the atmosphere upwind of, over and downwind of a hill. The wind tunnel experiments show that the grain size characteristics of aeolian dust deposits are affected by topography. Most apparent is the occurrence of a zone of reduced grain size on the leeside of hills, which extends from just upwind of the summit to a distance of several times the height of the hill. Slightly coarser than normal dust is deposited on the concave windward hill slope and in a zone downwind of the area of reduced grain size, but the increase in grain size in these zones remains very small. Although the normalized dust deposition profile for a hill does not vary substantially as a function of grain size, systematic trends are observed. The most important tendencies are: (1) a progressive extension, in the downwind direction, of a zone of decreased dust deposition on the leeside of a hill (the coarser the grains, the further downwind the zone of reduced deposition extends); (2) a progressive increase in dust deposition immediately upwind of a hill (the finer the grains, the higher the deposition value upwind of a hill becomes). Both tendencies are explained by the difference in inertia of the grains, which is controlled by grain size. Copyright © 2005 John Wiley & Sons, Ltd.     

Trapping of airborne dust by mosses in the Negev Desert,Israel

Airborne silt and clay containing calcium carbonate, quartz, clays, marine nannoplankton, and aquatic diatoms are trapped among stems of mosses in the Negev Highlands Desert. The mosses were studied in an area with 70 mm mean annual rainfall. They grow over the particles covering them and trap additional dust as it comes, resulting in the accumulation of loess sediments. The mosses protect the accumulated soil from erosion by wind or water. Remnants of the moss leaves and stems were found at a depth of 15 mm and more. No particles or minerals typical to basalt were found in the moss-trapped soil. The function of cushiony mosses may be used to explain the processes of loess trapping and protection in larger areas in moister areas such as the Northern Negev. Microscopic fossils in the dust may be used as guides to the origin of the (aeolian) sediments.     

Superposition of aeolian dust ripple patterns as a result of changing wind directions

The effect of a change of wind direction on the orientation (and some other morphometric characteristics) of aeolian dust ripples is investigated. Ripple formation is simulated in a wind tunnel on surfaces that are already characterized by a previously established rippling. The effect of a wind rotation of 45 degrees, 90 degrees, and 180 degrees is examined. It is found that wind rotations of 45 and 180 degrees will lead towards a ripple alignment perpendicular to the last air flow. A wind rotation of 90 degrees, however, leads towards a ripple alignment perpendicular to the resultant wind direction. The faster the wind blows, the more this effect is expressed. No distinct relationship exists between the asymmetry of a dust ripple (and a dust ripple field) and the direction of the wind blowing as the ripples formed. As the orientation and asymmetry of aeolian dust ripples do not necessarily reflect the air flow direction during which the ripples formed, great care should be taken when reconstructing wind directions from such aeolian ripples.     

Holocene fluvial valley fill sources of atmospheric mineral dust in the Skeleton Coast,Namibia

Western Namibia is a significant global source of atmospheric mineral dust. We investigate the relationship between dust and source sediments, assessing the sustainability of dust flux. Remote sensing studies have highlighted specific ephemeral fluvial systems as important contributors to dust flux, including highlighting sections of valleys that are the origins of dust plumes in the period 2005–2008. Little is known however about the specific within‐valley dust sediment sources, particularly whether dust is derived from modern ephemeral channel floors or older valley fill sediments, many of which have been reported in the region. As part of a region‐wide analysis of aeolian dust flux, we investigate the sediment properties of atmospheric dust samples and valley sediments from the Huab valley, one of the principal regional dust sources. Trapped dust samples contain up to 88% very fine sand and silt when collected samples are disaggregated prior to analysis. Valley fill surface samples comprise 80% very fine sand and silt, and the surface of the modern ephemeral channel 30%. Valley fill sediments were sampled at depths up to 3.6 m below the present surface and reveal Holocene depositional ages from 0.6 ± 0.03 ka back to 9.79 ± 0.73 ka. These sediments contain 30% to 6% very fine sand and silt, with levels decreasing with depth and age. Aeolian bedforms in the valley system (nebkhas on the fill surface and climbing dunes on valley margins) indicate that aeolian processes under the influence of strong seasonal easterly winds likely result in dust being winnowed out of the valley fill surfaces, with sandy bedforms being constructed from the coarser component of the fill sediments. The volume of valley fill sediment suggests dust sourced from Holocene sediments is likely to continue into the future regardless of flow conditions in the modern channel system. Copyright © 2017 John Wiley & Sons, Ltd.     

Nematode response to metal, PAHs and organic enrichment in tourist marinas of the mediterranean sea

The structure of nematode assemblages was investigated in the sediments of two different tourist marinas in the Mediterranean Sea and related to pollution variables. Nematode densities and generic compositions were determined, as were concentrations of heavy metals, PAHs and organic matter. Results showed different assemblages at the two marinas, with a dominance of the genera Paralongicyatholaimus and Daptonema. Significant correlations between nematodes and concentrations of environmental contaminants were found. In particular, Paralongicyatholaimus showed a significant negative correlation with Cu concentrations and was almost absent at the stations where higher Cu concentrations were found. The presence of sensitive/tolerant nematode genera represents a promising tool to identify areas subjected to a higher level of disturbance and to define the correct environmental management strategy for harbors.     

Effect of rock fragment embedding on the aeolian deposition of dust on stone‐covered surfaces

Many stone‐covered surfaces on Earth are subject to aeolian deposition of atmospheric dust. This study investigates how the deposition of dust is affected when rock fragments become gradually more embedded in the ground or, inversely, become more concentrated on the surface. Experiments were executed in an aeolian dust wind tunnel with eight different types of pebbles. The following parameters were measured: dust deposition on the pebbles, dust deposition between and underneath pebbles, total dust deposition (pebbles + inter‐pebble space), and the fraction, of total deposition, of dust caught by the pebbles alone. The absolute amount of dust deposition and the dust deposition density (dust deposition per unit surface) were studied for each parameter. The effects exerted by pebble size, pebble flattening, pebble elongation and wind speed were also investigated. Dust patterns on and around pebbles were also studied via flow visualization. The absolute amount of dust settling on pebbles decreases the more that the pebbles become embedded. Dust deposition density on pebbles, on the other hand, increases with embedding. The more pebbles become embedded in the soil, the more efficient the process of dust deposition on pebbles becomes. Dust deposition between and underneath pebbles increases with pebble embedding. Dust deposition density between and underneath pebbles is maximum at 50 per cent embedding, showing that in this area dust deposition is most efficient when pebbles are halfway embedded. Total deposition slightly decreases the more pebbles become embedded, but total dust deposition density increases with embedding. Aerodynamic flow separation and diverging and converging airflow play an important role in the process of dust deposition on stone‐covered surfaces. The more pebbles protrude above the soil, the more they act as an obstacle and the more they disturb the air and dust flow creating scouring zones, flow separation bubbles and shelter areas for the dust. All these effects diminish as pebbles become more embedded in the soil. However, perturbations in dust patterns remain visible until pebbles have disappeared entirely. Copyright © 2005 John Wiley & Sons, Ltd.     

Airborne dust deposition in the Okavango Delta,Botswana, and its impact on landforms

This study investigated the local‐scale generation and movement of dust in the seasonal swamps of the Okavango Delta, Botswana, with a view to examining possible transfer of material between ?ood plains and islands. It was found that most of the dust load was carried in the lowest 3 m of the air column, and consisted mainly of amorphous silica, indicating that dust was generated largely on the ?ood plains. Dust loads were found to be highest above the ?ood plains and lowest over the interiors of islands, probably due to the baf?ing effect of the island trees on wind velocity. The contrast in dust loads between islands and ?ood plains suggests that there is a net transfer of dust from ?ood plains to islands, but it was not possible to quantify this transfer. It is evident, however, that ?ood plains experience net erosion and islands net aggradation. A strong seasonality in dust loads was observed, with the maximum dust loads coinciding with maximum wind velocity in October. This also coincides with peak seasonal ?ooding in the delta, and only non‐inundated ?ood plains are capable of generating dust. Years of low ?ood therefore appear to be more dusty. There may also be transfer of material from higher‐lying to lower‐lying ?ood plains, which may reduce the topographic contrast on the ?ood plains. Copyright © 2004 John Wiley & Sons, Ltd.     

Techniques to measure the dry aeolian deposition of dust in arid and semi‐arid landscapes: a comparative study in West Niger

Seven techniques designed to measure the dry aeolian deposition of dust on a desert surface were tested during field experiments in Niger, central‐west Africa. Deposition fluxes were measured during eight periods of 3–4 days each. Experimental techniques tested were the MDCO (marble dust collector) method, the Frisbee method, the glass plate method (optical analysis of dust deposited on glass surfaces using particle imaging software), the soil surface method (deposition on a simulated desert floor) and the CAPYR (capteur pyramidal) method. Theoretical techniques tested were the inferential method and the combination method (gradient method extended with a deposition term for coarse dust particles). The results obtained by the MDCO, Frisbee, inferential and combination methods could be directly compared by converting the data to identical standard conditions (deposition on a water surface producing no resuspension). The results obtained by the other methods (glass plate, soil surface, CAPYR) were compared relatively. The study shows that the crude (unconverted) deposition fluxes of the five experimental techniques were similar, while the crude deposition fluxes calculated by the two theoretical techniques were substantially higher, of the order of four to five times as high as for the experimental techniques. Recalculation of the data to identical environmental conditions (the standard water surface) resulted in nearly identical deposition fluxes for the MDCO, Frisbee, inferential and combination techniques, although the latter two still had slightly higher values (but the differences remained small). The measurements illustrate the need to include a grain shape factor in theoretical dust deposition models. Without such a factor, theoretical models overestimate the deposition. The paper also discusses the advantages and disadvantages of the techniques tested. Copyright © 2007 John Wiley & Sons, Ltd.     

Biological response to coastal upwelling and dust deposition in the area off Northwest Africa

Nutrient supply in the area off Northwest Africa is mainly regulated by two processes, coastal upwelling and deposition of Saharan dust. In the present study, both processes were analyzed and evaluated by different methods, including cross-correlation, multiple correlation, and event statistics, using remotely sensed proxies of the period from 2000 to 2008 to investigate their influence on the marine environment. The remotely sensed chlorophyll-a concentration was used as a proxy for the phytoplankton biomass stimulated by nutrient supply into the euphotic zone from deeper water layers and from the atmosphere. Satellite-derived alongshore wind stress and sea-surface temperature were applied as proxies for the strength and reflection of coastal upwelling processes. The westward wind and the dust component of the aerosol optical depth describe the transport direction of atmospheric dust and the atmospheric dust column load.     

Stratigraphy and significance of Brown Tuffs on the Aeolian Islands (southern Italy)

Brown Tuffs (BT) are volcaniclastic ash deposits prominently represented in the stratigraphic profiles of all the Aeolian Islands (and Capo Milazzo on the northern coast of Sicily). Detailed stratigraphy and tephrochronology together with available radiometric ages suggest that they were emplaced over a long time interval spanning from the end of the last interglacial period (ca. 80 ka BP) up to 4–5 ka BP (age of the overlying Punte Nere pyroclastic products on Vulcano). The most complete BT succession is documented on Lipari where 14 distinct and successive units are subdivided by the interbedding of widespread tephra layers, local volcanic products, paleosols and epiclastic deposits and the occurrence of local erosive surfaces. Inter-island occurrence of Ischia-Tephra (a widely known tephra layer in the Aeolian archipelago dated at 56 ka BP) and Monte Guardia pyroclastics from Lipari (dated at 22–20 ka BP) subdivides the BT succession in Upper (UBT), Intermediate (IBT) and Lower BT units (LBT), which can be correlated at regional level: the LBT was emplaced between 80 and 56 ka BP, the IBT between 56 and 22 ka BP and the UBT between 20 and 4–5 ka BP. On the basis of stratigraphy, similarity in lithology and textural features, morphology of glass fragments, composition and consistency of thickness and grain-size variations, UBT units correlate with Piano Grotte dei Rossi tuffs on Vulcano island. They were generated by pulsating hydromagmatic explosive activity giving rise to pyroclastic density currents spreading laterally from a source located inside the La Fossa caldera on Vulcano island. Composition is in agreement with this hypothesis since UBT compositional features match those of Vulcano magmas erupted in that period. The effect of co-ignimbrite ash clouds (or associated fallout processes from sustained eruptive columns) is seen to explain the presence of UBT in areas further away from the suggested source (e.g. Salina and Lipari islands and Capo Milazzo). The origin of UBT exposed on Panarea island is still a matter of debate, due to contrasting compositional data. Due to large uniformity of lithological, textural and componentry characters with respect to the UBT, the lower portions of the BT succession (LBT-IBT) are considered to be the result of recurrent, large scale hydromagmatic eruptions of similar type. Moreover, for the IBT units, the correlation with Monte Molineddo 3 pyroclastics of Vulcano island (on the basis of lithological, compositional and stratigraphic matching) again suggests source(s) related to the Vulcano plumbing system and located within the La Fossa Caldera.     

The large earthquake of 8 August 1303 in Crete: seismic scenario and tsunami in the Mediterranean area

By conducting a historical review of this large seismic event in the Mediterranean, it has been possible to identify both the epicentral area and the area in which its effects were principally felt. Ever since the nineteenth century, the seismological tradition has offered a variety of partial interpretations of the earthquake, depending on whether the main sources used were Arabic, Greek or Latin texts. Our systematic research has involved the analysis not only of Arab, Byzantine and Italian chronicle sources, but also and in particular of a large number of never previously used official and public authority documents, preserved in Venice in the State Archive, in the Marciana National Library and in the Library of the Museo Civico Correr. As a result, it has been possible to establish not only chronological parameters for the earthquake (they were previously uncertain) but also its overall effects (epicentral area in Crete, Imax XI MCS). Sources containing information in 41 affected localities and areas were identified. The earthquake also gave rise to a large tsunami, which scholars have seen as having certain interesting elements in common with that of 21 July 365, whose epicentre was also in Crete. As regards methodology, this research made it clear that knowledge of large historical earthquakes in the Mediterranean is dependent upon developing specialised research and going beyond the territorial limits of current national catalogues.     

High-latitude dust deposition in snow on the glaciers of James Ross Island,Antarctica

High-latitude dust (HLD) depositions on four glaciers of James Ross Island (the Ulu Peninsula) were analysed. The deposition rate on the selected glaciers varies from 11.8 to 64.0 g m⁻², which is one order of magnitude higher compared to the glaciers in Antarctica or elsewhere in the world. A strong negative relationship between the sediment amount and altitude of a sampling site was found. This is most likely caused by the higher availability of aeolian material in the atmospheric boundary layer. General southerly and south-westerly wind directions over the Ulu Peninsula – with exceptions based on local terrain configuration – help to explain the significantly lower level of sediment deposition on San Jose Glacier and the high level on Triangular Glacier. X-ray fluorescence (XRF) spectrophotometry was used to estimate the relative proportions of the main and trace (lithophile) elements in the sediment samples. Both the sediment amount and the XRF results are analysed in a depth profile at each locality and compared among the glaciers, suggesting long-range transport of fine mineral material from outside James Ross Island. The distribution of aeolian sediment among the glaciers corresponds well with the prevailing wind direction on the Ulu Peninsula. © 2020 John Wiley & Sons, Ltd.     

Variations in dust event frequency over the past century reflected by ice-core and lacustrine records in north China

In this paper, we analyzed the variations of dust proxies in the Dunde, Malan and Chongce ice cores from the northern Tibetan Plateau and the Hongjiannao lacustrine sediment core from north Shaanxi Province, and found that they all showed a general decrease trend over the past century. Owing to the fact that all these ice cores and lacustrine core were retrieved from the margins and/or the leeward sides of the major areas of dust events in north China, their records could suggest that the dust event frequency in north China declined over the study period. This decrease trend might be attributed to increasing precipitation and weakening westerly. However, human activities have made the areal extent of desertification expand acceleratingly in north China. This status could make it possible that dust events would occur on a large spatial scale under the future climate change, which would be a big environmental issue we shall face.     

The dynamic effects of sediment availability on the relationship between wind speed and dust concentration

Where sediment supply is unlimited, previous research suggests that a strong, positive relationship between wind speed and dust concentration exists at the event scale. This relationship can break down if sediment availability is limited or changes during an event. This paper explores the dynamic effects of sediment availability on the relationship between wind speed and dust concentration using data from nine high‐latitude dust events recorded in Iceland. Of these events, six showed a strong positive relationship between wind speed and dust concentration. For the remainder, the relationship breaks down periodically during the event due to changing surface moisture conditions and atmospheric humidity. Results suggest a need to understand how spatial and temporal changes in humidity, surface soil moisture, soil texture and threshold velocity interact and control sediment availability for dust emissions in all environments, including at high latitudes. Copyright © 2018 John Wiley & Sons, Ltd.     

Gross erosion,net erosion and gross deposition of dust by wind: field data from 17 desert surfaces

Wind erosion measurements were carried out in Nellis Dunes Recreation Area, southern Nevada, USA. Gross erosion (the total mass of sediment effectively blown away from a surface), gross deposition (the total mass of sediment effectively depositing on a surface) and net erosion (the difference in sediment mass before and after an event) were measured for 1 year, on 17 different types of surfaces developed on loose dune sand, compacted sand, loose silt, compacted and/or aggregated silt, rock‐covered sands and silts, mixtures of sand, silt and clay, exposed petrocalcic horizons, gravelly substrata and bedrock. Results showed that net erosion, which is the type of erosion measured in field and laboratory experiments, strongly differs from gross erosion. Activity on a surface is much higher than classic net erosion measurements suggest. Future studies on wind erosion should better acknowledge the distinction between the two types of process. Also, a grain diameter of maximum susceptibility to wind erosion (‘optimum deflation diameter’) near 70 µm as proposed by the aeolian literature only exists for net wind erosion. No such optimum diameter was found for gross wind erosion within the particle range 0–100 µm delineating the transport modes of suspension and modified saltation. In addition, desert surfaces predominantly composed of sand did not show an optimum deflation diameter (for net erosion) around 70 µm. Instead, there was a preferential grain size around 15 µm at which particles were most vulnerable to net emission. Desert surfaces poor in sand showed the classic value of 70 µm. This suggests that interactions exist between the type of surface and the susceptibility of particles to wind erosion. This study is solely based on field data. Although results are supported by two previous wind tunnel studies, more wind tunnel experiments documenting the interactions between gross erosion and gross deposition are necessary. Copyright © 2010 John Wiley & Sons, Ltd.     

机载激光雷达对青岛及周边海域的气溶胶探测

工作波长为532 nm的机载大气环境探测激光雷达AEDAL（Atmospheric Environment Detecting Airborne Lidar）装载在CMS_3807飞机上,于2005年11月7～11日期间在青岛地区及周边海域上空进行了飞行探测.此次实验的目的有两个：验证我国用于大气环境探测的激光雷达技术已经具备从地基向空基乃至天基发展的条件;获得青岛地区及周边海域边界层结构及大气气溶胶时空分布变化的特点.激光雷达的高时空分辨率为获取飞行路径上的边界层结构及气溶胶时空分布提供了可能.为了研究下垫面对边界层及气溶胶时空分布的影响,预定的飞行路径上包含了丰富的地形变化,有城市、丘陵、海区等.通过给出11月8日及11日的探测结果,不仅得到了不同地区边界层结构及气溶胶的时空分布特点,还可以看到冷锋、地形、地面气象场等因素对它们的影响.     

A field experiment on the role of small scale wind gustiness in aeolian sand transport

Estimates of aeolian sand transport generally use an average wind speed to assess the wind energy. To determine if variation in small-scale wind gustiness (on the order of several seconds duration) has a significant effect on sand movement, detailed field measurements were made of wind speed and transport rate. Average wind speed and several gust parameters were derived from the wind data. The results indicate that small-scale gust information does not improve prediction of transport rates.     

Identifying regional dust transport pathways: ­application of kinematic trajectory modelling to a trans‐Tasman case

A kinematic trajectory model is used to investigate potential pathways of dust transport from Australia to New Zealand. Historically, these have been assumed to follow rather direct west–east trajectories spanning 2 to 3 days, often resulting in red snow events in the Southern Alps of New Zealand. However, results from the present study which examined the route taken by air parcels originating in southern Australia during dust storms on 24 and 25 May 1994, indicate that trans‐Tasman dust transport trajectories are more diverse than previously thought, and display considerable variation during single events. These more divergent pathways tie in more closely with aeolian dust sedimentation patterns identified by ocean coring in the Tasman Sea, and may account for the deposition of Australian dust on sub‐Antarctic islands located well south of the Australian continent. Copyright © 2000 John Wiley & Sons, Ltd.     

Hydrological conditions over the western Mediterranean basin during the deposition of the cold Sapropel 6 (ca. 175 kyr BP)

A new oxygen isotope record is reported from a stalagmite collected in the Argentarola Cave located on the Tyrrhenian coast of Italy. As shown from observations and numerical modeling of δ¹⁸O in modern precipitation, the recorded δ¹⁸O variability for this zone is dominated by the amount of precipitation (so-called ‘amount effect’). The δ¹⁸O profile measured in the stalagmite is characterized by a prominent negative excursion (ca. 2-3‰) between 180 and 170 kyr BP. This paleoclimatic feature is interpreted as being due to a relatively wet period which occurred during the penultimate glacial period, more precisely, during Marine Isotope Stage 6.5. This pluvial phase is shown to correspond chronologically to the deposition of the sapropel event 6 (S6). Although this particular sapropel event occurred during a cold phase, the δ¹⁸O excursion is similar to those corresponding to other sapropels (S4, S3 and S2). The evidence for humid conditions during S6 in the western Mediterranean basin agrees with previous studies based on deep-sea sediment cores. Taken collectively, the data suggest that during sapropel events dilution of ocean surface waters was not restricted to the output of the river Nile but was rather widespread over the entire Mediterranean Sea due to increased rainfall.