New Scientific Underwater Cable System Tokai-SCANNER for Underwater Geophysical Monitoring Utilizing a Decommissioned Optical Underwater Telecommunication Cable

We have developed a new cost-effective scientific underwater cable system named Tokai Submarine Cabled Network Observatory for Nowcast of Earthquake Recurrences (Tokai-SCANNER) using a decommissioned optical underwater telecommunication cable. We have used this cable in two ways simultaneously: 1) to construct an ocean-bottom observatory at the end of the cable, and 2) to use the cable as a long emitting antenna to sense electromagnetic properties of the Earth's crust. We have also developed a new time-synchronization system that sends a one-pulse-per-second (1PPS) signal and NMEA data to underwater sensors. To vary the supply voltage and current to the observatory and to emit a low-frequency electromagnetic field around the underwater cable, we have also developed an underwater power unit that has a wide input voltage and current range. Tokai-SCANNER has been functioning since April 2007.      

Transport measurements from in-service undersea telephone cables

The motion of the ocean through the Earth's magnetic field creates a cross-stream voltage proportional to the transport of the stream. These motion-induced voltages have been observed for more than ten years by the use of an abandoned cable spanning the Florida Current. In-service undersea telephone cables, including fiber optic cables with branch lines, can also be used to determine the motion-induced voltages between the cable sea-Earth grounds because the repeaters in these cables are powered by a nearly constant electric current, the return path for this current is through the ocean via the sea-Earth grounds, and the power voltage and current are readily measured at the cable station or stations. Ocean voltages between West Palm Beach, FL, and Eight Mile Rock, Grand Bahama Island, observed since 1985 by use of an in-service cable yield monthly estimates of the Florida Current transport with an r.m.s. accuracy of 1.1 Sv when compared with the monthly voltage-derived transports between Jupiter, FL, and Settlement Point, Grand Bahama Island, observed by the use of an abandoned cable. This corresponds to an accuracy of 3% of the mean transport of 32.3 Sv     

Societal need for improved understanding of climate change, anthropogenic impacts, and geo-hazard warning drive development of ocean observatories in European Seas

Society’s needs for a network of in situ ocean observing systems cross many areas of earth and marine science. Here we review the science themes that benefit from data supplied from ocean observatories. Understanding from existing studies is fragmented to the extent that it lacks the coherent long-term monitoring needed to address questions at the scales essential to understand climate change and improve geo-hazard early warning. Data sets from the deep sea are particularly rare with long-term data available from only a few locations worldwide. These science areas have impacts on societal health and well-being and our awareness of ocean function in a shifting climate.Substantial efforts are underway to realise a network of open-ocean observatories around European Seas that will operate over multiple decades. Some systems are already collecting high-resolution data from surface, water column, seafloor, and sub-seafloor sensors linked to shore by satellite or cable connection in real or near-real time, along with samples and other data collected in a delayed mode. We expect that such observatories will contribute to answering major ocean science questions including: How can monitoring of factors such as seismic activity, pore fluid chemistry and pressure, and gas hydrate stability improve seismic, slope failure, and tsunami warning? What aspects of physical oceanography, biogeochemical cycling, and ecosystems will be most sensitive to climatic and anthropogenic change? What are natural versus anthropogenic changes? Most fundamentally, how are marine processes that occur at differing scales related?The development of ocean observatories provides a substantial opportunity for ocean science to evolve in Europe. Here we also describe some basic attributes of network design. Observatory networks provide the means to coordinate and integrate the collection of standardised data capable of bridging measurement scales across a dispersed area in European Seas adding needed certainty to estimates of future oceanic conditions. Observatory data can be analysed along with other data such as those from satellites, drifting floats, autonomous underwater vehicles, model analysis, and the known distribution and abundances of marine fauna in order to address some of the questions posed above. Standardised methods for information management are also becoming established to ensure better accessibility and traceability of these data sets and ultimately to increase their use for societal benefit. The connection of ocean observatory effort into larger frameworks including the Global Earth Observation System of Systems (GEOSS) and the Global Monitoring of Environment and Security (GMES) is integral to its success. It is in a greater integrated framework that the full potential of the component systems will be realised.     

微机控制大功率脉冲电源

介绍一种新型电化学用大功率脉冲电源的硬件原理及软件算法,它的特殊优势在于其多闭环反馈控制可实现（大惰性负载情况下）垂直方波,实现恒流制的任意值限压（包括负载突然断路瞬间输出电压限制到０）以及实现恒压制的任意值限流（包括负载突然短路时瞬间实现恒流）。近期已成功应用在铝合金阳极氧化和镀铜等工业技术领域。     

Study on 10 kVDC powered junction box for a cabled ocean observatory system

A cabled ocean observatory system that can provide abundant power and broad bandwidth communication for undersea instruments is developed. A 10 kV direct current (kVDC) with up to 10 kW power, along with 1 Gigabit/sec Ethernet communication, can be transmitted from the shore to the seafloor through an umbilical armored cable. A subsea junction box is fixed at a cable terminal, enabling the extension of up to nine connections. The box consists of three main pressure vessels that perform power conversion, power distribution, and real-time communication functions. A method of stacking modules is used to design the power conversion system in order to reduce the 10 kV voltage to levels that can power the attached instruments. A power distribution system and an Ethernet communication system are introduced to control the power supply and transmit data or commands between the terminals and the shore station, respectively. Specific validations of all sections were qualified in a laboratory environment prior to the sea trial. The ocean observatory system was then deployed at the coast of the East China Sea along with three in situ instruments for a 14-day test. The results show that this high voltage-powered observatory system is effective for subsea long-term and real-time observations.     

Power system considerations for undersea observatories

Power systems for undersea observatories combine ideas from terrestrial power systems and switching power supplies with experience from undersea cable systems. Basic system tradeoffs for various design decisions are explored in this paper. First, design questions including whether the power delivery should be alternating or direct current and a parallel or series network are examined. This introduces the question of maximum power delivery capability, which is explored in depth. A separate issue, the negative incremental resistance presented to the delivery system by the use of constant-voltage converters, is examined, and the resulting dynamics explored by simulation     

Multidisciplinary geophysical measurements on the ocean floor usingdecommissioned submarine cables: VENUS project

To perform geophysical and multidisciplinary real-time measurements on the ocean floor, it has been attempted to reuse decommissioned submarine cables. The VENUS project reuses the TPC-2, which is one of these systems and runs across the entire Philippine Sea Plate between Guam Island and Okinawa Island. The VENUS system comprises an ocean floor observatory, a submarine cable, and a land system. The major components of the ocean floor observatory are geophysical instruments and a telemetry system. There are seven scientific instrument units including broadband seismometers and a hydrophone array. Digital telemetry using the old analog telephone cable obtains high data accuracy and real-time accessibility to data from a laboratory on land. The bottom-telemetry system and a part of sensor units were installed at a depth of 2157 m on the landward slope of the Ryukyu (Nansei-Syoto) Trench on August 29, 1999. The data from the hydrophone array and tsunami gauge have been correctly transmitted to the data center. The rest of the scientific instruments will be deployed by deep-tow equipment and a remotely operated vehicle. Using a decommissioned submarine cable will greatly reduce construction costs compared to using a new cable system     

An underwater towed electromagnetic source for geophysical exploration

Low-frequency electromagnetic methods are used in geophysical exploration to detect the magnetic field distortion between a transmitter and receiver produced by locally conductive bodies. Both ground and airborne systems are in current use. It is possible to similarly conduct underwater geophysical exploration by using an underwater towed source of electromagnetic radiation and a receiving magnetic or electric field detector. The receiver can be towed on an auxiliary cable, mounted on a boom on the towing platform, or land based. An underwater towed electromagnetic source suitable for ocean-bottom exploration has been constructed, and its underwater propagation characteristics at low frequency have been studied. This underwater calibrated source (UCS) is 4 m long, weighs 383 kg in air, and can produce vertical and horizontal magnetic dipoles and a horizontal electric dipole. Powered by a current-feedback-controlled, high-power, modified sonar amplifier, the UCS can produce 9710 ampereturn.m2 of magnetic dipole or 200 A.m of electric dipole at 50 A at frequencies up to 200 Hz without significant attenuation from coil inductance. This paper concentrates on the mechanical, hydrodynamic, and magnetic design details of the UCS and the electrical system, consisting of the high-current drive power system and the shipboard monitoring system for attitude and depth detectors.     

A Geometrically Exact Formulation for Three-Dimensional Numerical Simulation of the Umbilical Cable in A Deep-Sea ROV System

This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle(ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized-a implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current.     

A Geometrically Exact Formulation for Three-Dimensional Numerical Simulation of the Umbilical Cable in A Deep-Sea ROV System

This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle (ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized- implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current.     

Anthropogenic increases of catchment nitrogen and phosphorus loads in New Zealand

Spatial regression models were used to predict yields (kg?ha^?1?yr^?1) of nitrogen (N) and phosphorus (P) discharged from catchments throughout New Zealand under natural and current conditions. The models were derived using loads (kg?yr^?1) of TN, NO₃-N, TP and DRP calculated for 592 river water quality monitoring sites. Anthropogenic increases in yields above natural levels were associated with the proportions of catchments occupied by the intensive agricultural land cover and were unevenly distributed across regions. Anthropogenic increases in national loads of TN, NO₃-N, TP and DRP exported to the ocean were 74%, 159%, 48% and 18%, respectively. Increases in loads exported to the ocean varied considerably at smaller scales, with catchments having significant load increases between 4- and 26-fold for N and 6- to 9-fold for P. Predictions of yields and loads reported here have utility in the development of strategies to manage nutrients.     

Nitrogen loads to New Zealand aquatic receiving environments: comparison with regulatory criteria

ABSTRACT

There is concern about the deteriorating nutrient status of aquatic receiving environments in New Zealand. We estimated the amount by which current nitrogen (N) concentrations and loads exceed criteria in rivers, lakes and estuaries nationally. Criteria corresponded to national ‘bottom-line’ (i.e. minimal) environmental objectives set by government policy. Three metrics were evaluated: (1) degree of compliance describes the current TN loads in receiving environments relative to criteria; (2) catchment N status describes the acceptability of catchment N loads compared to criteria; and (3) excess load indicates the amount by which the N load exceeds the maximum allowable load (kg yr^?1). Non-compliance with N criteria was broadly distributed nationally particularly in low-elevation catchments. Catchments with unacceptable N status constituted at least 31% of New Zealand’s land area, which corresponds to at least 43% of the country’s agricultural land. The national excess load was estimated to be at least 19.1 Gg yr^?1. We are 97.5% confident that estimated excess loads exceed zero for nine of 15 regions and for the nation as a whole. The analyses provide a strategic assessment of where reductions in N emissions are required to achieve the minimal national objectives.     

把海洋开发作为跨世纪的国家战略

２１世纪将是全面开发利用海洋的时代，许多沿海国家将把海洋开发作为国家战略。我国是世界上人口最多的国家，陆地资源人均占有量少，更应该重视开发海洋，建设临海工业带，发展海洋农牧化，开发建设海运网络等。发展海洋经济必须走科技兴海之路，抓科技储备，改造传统产业，发展新兴产业，不断提高海洋开发生产力水平。     

适用于并网型海洋能发电装置的防孤岛检测方法研究及系统设计

针对海洋能发电装置的研究现状和未来发展,预计并网型海洋能发电装置会成为重要发展方向,主要是在用户侧并网。发电装置与本地负载会产生孤岛效应,对电网和发电装置的安全性和稳定性产生严重影响。因此,并网前对海洋能发电装置进行防孤岛能力的检测成为必然环节。文中设计了一种适用于并网型海洋能发电装置的防孤岛检测系统,介绍了系统的功能与结构,参考分布式发电装置接入电网的相关标准,探讨了适合并网型海洋能发电装置的防孤岛检测方法,为检测工作的开展打下基础。     

水平循环荷载下海上风电楔形单桩土体变形研究

海上风电工程主要受到风、波浪及洋流等产生的水平循环荷载作用,本文研究楔形单桩基础在水平循环荷载作用下的变形规律,并探讨不同循环荷载对变形规律产生的影响,以确保风电设施正常运行。通过数值模拟建立海上风电单桩-海床模型,考虑土体超孔隙水压力的演变规律及土体致密规律,土体采用UBC3D-PLM本构模型。本文重点讨论并分析在不同水平循环荷载作用下楔形单桩基础与等截面单桩基础的桩周土体位移、塑性应变及桩基累计转角位移之间的差异。研究结果表明：楔形结构会降低桩周土体位移及塑性应变,使得楔形单桩基础旋转中心位置更低,产生倾覆的可能更小,当循环荷载比为0.7时,累计转角位移能减少41.86%;循环荷载越大,楔形单桩基础水平受荷特性越好,累计位移减少量的增长率越高。研究成果可为今后海上风电基础的选择与设计提供参考。     

Seismic monitoring of western Pacific typhoons

Typhoons inflict large damage to societies, but are usually difficult to monitor in close proximity in real-time without expensive instruments. Here we study the possibility of using seismic waveforms on the seafloor and on land to monitor the turning of a far away or approaching typhoon. Up to 67% of the typhoons making landfall in Taiwan come from the eastern shore, so that we deployed broadband ocean-bottom seismometers (OBSs) offshore eastern Taiwan in 2006 to study ground motion in close proximity to a typhoon. Typhoons generate ocean waves, which generate pressure signals in the water column before being transmitted to the seafloor as seismic waves and recorded by the OBSs. The ground motions on the seafloor correlate with locally increased (ocean) wave heights and wave periods, suggesting that the ground motions are mostly induced by in situ or nearby pressure fields, as shown by coherence function analyses. When a typhoon turns and changes wave-wave interaction near the source region, a new set of en echelon patterns develops which can be observed by OBSs and land stations. Similar features occur when a typhoon crosses a landmass and re-enters the ocean. The energy level ratio between the single-frequency and double-frequency microseisms also changes abruptly when the typhoon turns. These features can potentially help near real-time early warning with little cost to complement other conventional typhoon early warning methods.     

The Long-term Ecosystem Observatory: an integrated coastalobservatory

An integrated ocean observatory has been developed and operated in the coastal waters off the central coast of New Jersey, USA. One major goal for the Long-term Ecosystem Observatory (LEO) is to develop a real-time capability for rapid environmental assessment and physical/biological forecasting in coastal waters. To this end, observational data are collected from satellites, aircrafts, ships, fixed/relocatable moorings and autonomous underwater vehicles. The majority of the data are available in real-time allowing for adaptive sampling of episodic events and are assimilated into ocean forecast models. In this observationally rich environment, model forecast errors are dominated by uncertainties in the model physics or future boundary conditions rather than initial conditions. Therefore, ensemble forecasts with differing model parameterizations provide a unique opportunity for model refinement and validation. The system has been operated during three annual coastal predictive skill experiments from 1998 through 2000. To illustrate the capabilities of the system, case studies on coastal upwelling and small-scale biological slicks are discussed. This observatory is one part of the expanding network of ocean observatories that will form the basis of a national observation network     

Nonlinear Finite Element Analysis of Ocean Cables

This study has focused on developing numerical procedures for the dynamic nonlinear analysis of cable structures subjected to wave forces and ground motions in the ocean. A geometrically nonlinear finite element procedure using the isoparamnetrie curved cable element based on the Lagrangian folmulation is briefly summarized. A simple and accurate method to determine the initial equilibrium state of cable systems associated with self-weights, buoyancy and the motion of end points is presented using the load incremental method combined with penalty method. Also the Newmark method is used for dynamic nonlinear analysis of ocean cables. Numerical examples are presented to validate the present numerical method.     

Cost and value of multidisciplinary fixed-point ocean observatories

Sustained ocean observations are crucial to understand both natural processes occurring in the ocean and human influence on the marine ecosystems. The information they provide increases our understanding and is therefore beneficial to the society as a whole because it contributes to a more efficient use and protection of the marine environment, upon which human livelihood depends. In addition the oceans, which occupy 73% of the planet surface and host 93% of the biosphere, play a massive role in controlling the climate. Eulerian or fixed-point observatories are an essential component of the global ocean observing system as they provide several unique features that cannot be found in other systems and are therefore complementary to them. In addition they provide a unique opportunity for multidisciplinary and interdisciplinary work, combining physical, chemical and biological observations on several time scales. The fixed-point open ocean observatory network (FixO3) integrates the 23 European open ocean fixed-point observatories in the Atlantic Ocean and in the Mediterranean Sea. The programme also seeks to improve access to key installations and the knowledge they provide for the wider community, from scientists, to businesses, to civil society. This paper summarises the rationale behind open ocean observatories monitoring the essential ocean variables. It also provides an estimate of the costs to operate a typical fixed-point observatory such as those included in the FixO3 network. Finally an assessment of the type of data and services provided by ocean observations and their value to society is also given.