Geochemical variations of major and trace elements in recent sediments,off the Gulf of Mannar,the southeast coast of India

The Gulf of Mannar along the Tuticorin coast is a coral base of the southeast coast of India. To obtain a preliminary view of its environmental conditions, geochemical distribution of major elements (Si, Al, Fe, Ca, Mg, Na, K, P), trace elements (Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) and acid leachable elements (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) were analyzed in surface sediment samples from two seasons. Geochemical fractionation confirmed the lithogenic origin of metals, which were mainly associated with the detrital phase. The sediments in the gulf are sandy with abundant calcareous debris, which controls the distribution of total and acid leachable elements. Enrichment factors relative to crust vary by a magnitude of two to three and the presence of trace metals indicates the input of Cr, Pb, Cd, Cu and Zn in both forms through industrial activities. Factor analysis supports the above observation with higher loadings on acid leachable elements and its association with CaCO₃. The increase in concentration of trace metals (Cr, Pb, Cd, Cu, Co, Ni, Zn) along the Gulf of Mannar indicates that the area has been contaminated by the input from riverine sources and the industries nearby. The present study indicates that other sources should be evaluated in the long-term monitoring program.     

Accumulation and sources of heavy metals in urban topsoils: a case study from the city of Xuzhou, China

The knowledge of the variability, the anthropogenic versus natural origin and corresponding environmental risk for potentially harmful elements in urban topsoils is of importance to assess human impact. The aims of the present study were: (1) to assess the distribution of heavy metals (Sn, Li, Ga, Ba, Fe, Mn, Co, Be, Ti, Al, Hg, Cr, Sb, As, Bi, Pd, Pt, Au, Ni, Cd, Zn, Cu, Pb, Se, Mo, Sc and Ag) in urban environment; (2) to discriminate natural and anthropogenic contributions; and (3) to identify possible sources of pollution. Multivariate statistic approaches (principal component analysis and cluster analysis) were adopted for data treatment, allowing the identification of three main factors controlling the heavy metal variability in Xuzhou urban topsoils. Results demonstrate that Hg, Cr, Sb, As, Bi, Pd, Pt, Au, Ni, Cd, Br, Zn, Cu, S, Pb, Se, Mo, Sc and Ag could be inferred to be tracers of anthropogenic pollution, whereas Al, Ti, Ga, Li, V, Co, Pt, Mn and Be were interpreted to be mainly inherited from parent materials. Iron, Ba, Sn, Pd and Br were interpreted to be affected by mixed sources.     

Evaluation of elemental enrichments in surface sediments off southwestern Taiwan

Surface slices of 20 sediment cores, off southwestern Taiwan, and bed sediment of River Kaoping were measured for major and trace elements (Al, As, Ca, Cd, Cl, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Si, Ti, V, and Zn) to evaluate the geochemical processes responsible for their distribution, including elemental contamination. Major element/Al ratio and mean grain size indicate quartz-dominated, coarse grained sediments that likely derived from sedimentary rocks of Taiwan and upper crust of Yangtze Craton. Bi-plot of SiO₂ versus Fe₂O₃^T suggests the possible iron enrichment in sediments of slag dumping sites. Highest concentrations of Cr, Mn, P, S, and Zn found in sediments of dumping sites support this. Correlation analysis shows dual associations, detrital and organic carbon, for Cr, P, S, and V with the latter association typical for sediments in dumping sites. Normalization of trace elements to Al indicates high enrichment factors (>2) for As, Cd, Pb, and Zn, revealing contamination. Factor analysis extracted four geochemical associations with the principal factor accounted for 25.1% of the total variance and identifies the combined effects of dumped iron and steel slag-induced C–S–Fe relationship owing to authigenic precipitation of Fe–Mn oxyhydroxides and/or metal sulfides, and organic matter complexation of Fe, Mn, Ca, Cr, P, and V. Factors 2, 3, and 4 reveal detrital association (Ti, Al, Ni, Pb, Cu, and V), effect of sea salt (Cl, Mg, Na, and K) and anthropogenic component (As and Zn)-carbonate link, respectively, in the investigated sediments.     

Atmospheric wet deposition of trace elements to central Tibetan Plateau

To investigate trace elements in wet precipitation over the Tibetan Plateau (TP), a total of 79 event-based precipitation samples were collected from September 2007 to September 2008 at Nam Co Station. Samples were analyzed for concentrations of Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb using inductively coupled plasma-mass spectrometry (ICP-MS). The annual volume-weighted concentrations of elements were generally comparable to other background sites, and much lower than urban areas. The enrichment factors (EF) showed that, in comparison with the Tibetan soils, the wet precipitation had elevated concentrations of Cr, Co, Ni, Cu, Zn, Cd and Pb, probably indicating their anthropogenic origins. Other elements (Al, Fe, Mn and V) with enrichment factor value of <10 may derive mainly from crustal sources. The principal component analysis further confirmed the two different groups of elements in wet deposition samples. The backward trajectories were calculated for each precipitation event using the NOAA HYSPLIT model. The results indicated significant differences of EF for trace elements of anthropogenic origin between the summer monsoon and non-monsoon seasons. The data obtained in the present study indicated that pollutants can affect remote high altitude regions like the Tibetan Plateau through long-range transport, especially in the summer monsoon season.     

Environmental geochemistry of El Temsah Lake sediments, Suez Canal district, Egypt

The heavy metal contents of Mn, Ni, Cu, Zn, Cr, Co, Pb, Cd, Fe, and V in the surface sediments from five selected sites of El Temsah Lake was determined by graphite furnace atomic absorption spectrophotometer. Geochemical forms of elements were investigated using four-step sequential chemical extraction procedure in order to identify and evaluate the mobility and the availability of trace metals on lake sediments, in comparison with the total element content. The operationally defined host fractions were: (1) exchangeable/bound to carbonate, (2) bound to Fe/Mn oxide, (3) bound to organic matter/sulfides, and (4) acid-soluble residue. The speciation data reveals that metals Zn, Cd, Pb, Ni, Mn, Cu, Cr, Fe, and V are sink primarily in organic and Fe–Mn oxyhydroxides phases. Co is mainly concentrated in the active phase. This is alarming because the element is enriched in Al Sayadin Lagoon which is still the main site of open fishing in Ismailia. Average concentration of the elements is mostly above the geochemical background and pristine values of the present study. There is a difference on the elemental composition of the sediment collected at the western lagoon (Al Sayadin Lagoon), junction, the shoreline shipyard workshops, and eastern beach of the lake. Depending upon the nature of elements and local pollution source, high concentration of Zn, Pb, and Cu are emitted by industrial wastewater flow (shoreline workshops), while sanitary and agricultural wastewater (El Bahtini and El Mahsama Drains) emit Co and Cd in Al Sayadin Lagoon. On the other hand, there is a marked decrease in potentially toxic heavy metal concentrations in the sediments at the most eastern side of the lake, probably due to the successive sediment dredging and improvements in water purification systems for navigation objective. These result show that El Temsah receives concentrations in anthropogenic metals that risk provoking more or less important disruptions, which are harmful and irreversible on the fauna and flora of this lake and on the whole ecobiological equilibrium.     

太平洋北部铁锰结核富集区沉积物的元素地球化学特征

本文对太平洋北部铁锰结核富集区沉积物的元素地球化学作了较为详细的研究。因子分析提供的信息表明,元素的分布主要受三个因子控制:（1）粘土及Fe、Mn氧化物水化物胶体的吸附作用;（2）生物化学作用过程有关的自生沉积作用;（3）海底页岩风化及附近海区的火山喷发作用。元素的来源:（1）Fe、Mn、Cu、Co、Ni、Zn、Cr、Cr、Mg、Al、Ti、K共生,主要来自粘土吸附;（2）C_有机、N、Sr、Na及Si、Ca、Sr主要来自生物化学过程沉积;（3）Pb主要来源于岩石碎屑（火山喷发碎屑）。     

Status of anthropogenically induced metal pollution in the Kanpur-Unnao industrial region of the Ganga Plain, India

 The Ganga Plain is one of the most densely populated regions and one of the largest groundwater repositories of the Earth. For several decades, the drainage basin of the Ganga Plain has been used for the disposal of domestic and industrial wastes which has adversely affected the quality of water, sediments and agricultural soils of the plain. The concentrations of Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sn, Zn and organic carbon were determined in river sediments and soils of the Ganga Plain in the Kanpur-Unnao industrial region in 1994 and 1995 (pre-monsoon period of April–May). High contents (maximum values) of C-org (12.0 wt. %), Cr (3.40 wt. %), Sn (1.92 wt. %), Zn (4000 mg/kg), Pb (646 mg/kg), Cu (408 mg/kg), Ni (502 mg/kg) and Cd (9.8 mg/kg) in sediments (<20 μm fraction); and C-org (5.9 wt. %), Cr (2.16 wt. %), Sn (1.21 wt %), Zn (975 mg/kg) and Ni (482 mg/kg) in soils (<20 μm) in the pre-monsoon period of 1994 were found. From 1994 to 1995 the contents of Fe and Sn in sediments increase whereas those of C-org, Cd, Cu, Ni and Zn decrease. Considering the analytical errors, Al, Co, Cr, Mn and Pb do not show any change in their concentrations. In soils, the contents of Cd, Fe and Sn increase whereas those of Ni decrease from 1994 to 1995. Aluminium, Co, Cr, Cu, Mn, Pb and Zn do not show any change in their concentrations from 1994 to 1995. About 90% of the contents of Cd, Cr and Sn; 50–75% of C-org, Cu and Zn; and 25% of Co, Ni and Pb in sediments are derived from the anthropogenic input in relation to the natural background values, whereas in soils this is the case for about 90% of Cr and Sn; about 75% of Cd; and about 25% of C-org, Cu, Ni and Zn. The sediments of the study area show enrichment factors of 23.6 for Cr, 14.7 for Cd, 12.2 for Sn, 3.6 for C-org, 3.2 for Zn, 2.6 for Cu and 1.6 for Ni. The soils are enriched with factors of 10.7 for Cr, 9.0 for Sn, 3.6 for Cd, 1.8 for Ni and 1.5 for Cu and Zn, respectively. Received: 3 March 1998 · Accepted: 15 June 1998     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

Assessment of trace element geochemistry of Hampton Roads harbor and lower Chesapeake Bay area sediments

Acid extractable Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb. and Zn were determined in sediments from the Inner Virginia Shelf, and from shipping channels in the lower Chesapeake Bay and Hampton Roads, Virginia, harbor system. Data were evaluated by a variety of techniques Levels of Cd, Cu, Pb, and Zn exceeded average crustal abundances for most of the study sites. Cumulative frequency curves suggested that there were two major populations for all metals and perhaps a third and smaller, one for Cd, Cr, and Mn Plots of metal vs Fe indicated no anthropogenic inputs of metals for shelf and Chesapeake Bay channel sites, but suggested anthropogenic influences for all metals in several of the inshore sites. Enrichment factor calculations showed enrichment of Cd, Pb, and Zn with respect to average crustal abundances for all sites and of Cu for the industrial harbor system. A recommendation of this study for evaluation of environmental geochemical metals data is to utilize mean concentrations, cumulative frequency plots, and metal vs Fe and/or enrichment factor calculations when evaluating the pollution status of sediments.     

Heavy metal history from cores in Wellington Harbour,New Zealand

Analysis of ten heavy metals (Ag, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, Zn) in six sediment cores from Wellington Harbour show both anthropogenic enrichments and diagenetic modifications. Absolute concentrations determined by two methods, x-ray fluorescence and acid leaching for bioavailability, are not comparable. However, vertical trends in concentrations of the cored sediment are comparable. To assess levels of anthropogenic pollution, enrichment factors (enriched concentrations in upper core divided by background levels in lower core) are preferred over index of accumulation (I _geo) values because preindustrial or background levels of heavy metals are well constrained. The ten metals are placed into three groups: (1) Cu, Pb, and Zn, which show the most anthropogenic enrichment; (2) As, Cd, Cr, Ni, and Sb, which are often associated with anthropogenic pollution but show only minor enrichment; and (3) Fe and Mn, which are diagenetically enriched. Assuming harbor waters are well mixed, anthropogenic enrichments of Cu, Pb, and Zn, are time correlative, but the degree of enrichment depends on the method of analysis and core location. Levels of As, Cd, Pb, and Zn show small variations in preindustrial sediments that are not related to changes in grain size and probably result from changes in the oxidation-reduction potential of the sediments and salinity of the pore waters.     

Quantitative identification and source apportionment of anthropogenic heavy metals in marine sediment of Hong Kong

Based on ten heavy metals collected twice annually at 59 sites from 1998 to 2004, enrichment factors (EFs), principal component analysis (PCA) and multivariate linear regression of absolute principal component scores (MLR-APCS) were used in identification and source apportionment of the anthropogenic heavy metals in marine sediment. EFs with Fe as a normalizer and local background as reference values was properly tested and suitable in Hong Kong, and Zn, Ni, Pb, Cu, Cd, Hg and Cr mainly originated from anthropogenic sources, while Al, Mn and Fe were derived from rocks weathering. Rotated PCA and GIS mapping further identified two types of anthropogenic sources and their impacted regions: (1) electronic industrial pollution, riparian runoff and vehicle exhaust impacted the entire Victoria Harbour, inner Tolo Harbour, Eastern Buffer, inner Deep Bay and Cheung Chau; and (2) discharges from textile factories and paint, influenced Tsuen Wan Bay and Kwun Tong typhoon shelter and Rambler Channel. In addition, MLR-APCS was successfully introduced to quantitatively determine the source contributions with uncertainties almost less than 8%: the first anthropogenic sources were responsible for 50.0, 45.1, 86.6, 78.9 and 87.5% of the Zn, Pb, Cu, Cd and Hg, respectively, whereas 49.9% of the Ni and 58.4% of the Cr came from the second anthropogenic sources.     

Source and distribution of metals in urban soil of Bombay,India, using multivariate statistical techniques

Simplification of a complex system of geochemical variables obtained from the soils of an industrialized area of Bombay is attempted by means of R-mode factor analysis. Prior to factor analysis, discriminant analysis was carried out taking rock and soil chemical data to establish the anthropogenic contribution of metals in soil. Trace elements (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) are expressed in terms of three rotated factors. The factors mostly indicate anthropogenic sources of metals such as atmospheric fallout, emission from different industrial chimneys, crushing operations in quarries, and sewage sludges. Major elements (Na, Mg, Al, Si, P, K, Ca, Ti, Mn, and Fe) are also expressed in terms of three rotated factors indicating natural processes such as chemical weathering, presence of clay minerals, and contribution from sewage sludges and municipal refuse. Summary statistics (mean, standard deviation, skewness, and kurtosis) for the particle size distribution were interpreted as moderate dominance of fine particles. Mineralogical studies revealed the presence of montmorillonite, kaolinite, and illite types of clay minerals. Thus the present study provides information about the metal content entering into the soil and their level, sources, and distribution in the area.     

Spatial variation and risk assessment of heavy metals in paddy rice from Hunan Province,Southern China

Heavy metal contamination in polished rice grains collected from Hunan Province, Southern China, has been investigated in this study. The concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in rice were determined by microwave-assisted digestion and inductively coupled plasma-mass spectrometry method. In order to evaluate the correlations among heavy metals, statistical analyses including Pearson’s correlation analysis, principal component analysis and hierarchical cluster analysis were performed. Three distinct clusters were classified by the hierarchical cluster analysis approach. In the principal component analysis, three principle components were extracted with the eigenvalue >1.0. The spatial distribution of heavy metals was predicted by the ordinary kriging interpolation. Cu and Ni with similar distribution patterns could be primarily originated from geogenic source. The hot-spot areas in the distribution patterns of Mn, Pb and Zn could be mainly related to mining and smelting activities. Cd and Co might be derived from the combination of natural existence and anthropogenic sources. The chronic non-carcinogenic effect on local rice consumers from exposure to heavy metals was estimated by the target hazard quotient. The average target hazard quotient values of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn were 1.754, 0.367, 0.003, 0.544, 0.165, 0.775, 0.228, 0.049 and 0.481, respectively. The target hazard quotient value of Cd exceeded the threshold value suggesting high potential health risk to residents in Hunan Province through rice consumption.     

包头市典型工业区表层土壤中重金属污染状况及其潜在生态风险研究

为了解包头市典型工业企业对其所在地土壤中重金属含量的影响及污染现状,利用相关性系数对其表层土壤中7种重金属(Cu、Zn、Pb、Cr、Cd、Mn、Ni)来源进行研究,并采用内梅罗综合污染指数法和潜在生态危害指数对其污染状况进行评价。结果表明,7种重金属含量平均值均高于内蒙古土壤背景值,其中Cd、Mn、Ni超标率已达100%,而Cu、Pb、Zn的超标率分别为97%、93%和93%,只有Cr超标率较低(53%),污染程度依次为CdPbCuNiZnMnCr,其中Pb和Cd为重度污染,Cu、Zn、Ni为中度污染,Cr、Mn为轻度污染;Cu、Zn、Cr、Mn、Ni可能同时来自工业生产和交通运输两个源,而Pb和Cd除上述来源外,燃煤烟气的排放有较大贡献。潜在生态危害依次为CdPbCuNiCrZnMn,其中Cd的潜在生态风险最大,应予以高度重视,其他金属的风险均为轻微。     

Application of multivariate geostatistics in the investigation of heavy metal contamination of roadside dusts from selected highways of the Greater Toronto Area, Canada

A good understanding of roadside soil contamination and the location of pollution sources is important for addressing many environmental problems. The results are reported here of an analysis of the content of metals in roadside dust samples of four major highways in the Greater Toronto area (GTA) in Ontario, Canada. The metals analyzed are Pb, Zn, Cd, Ni, Cr, Cu, Mn, and Fe. Multivariate geostatistical analysis [correlation analysis (CA), principal component analysis (PCA), and hierarchical cluster analysis (HCA)] were used to estimate soil chemical content variability. The correlation coefficient shows a positive correlation between Cr–Cd, Mn–Fe, and Fe–Cu, while negatively between Zn–Cd, Mn–Cd, Zn-Cr, Pb–Zn, and Ni–Zn. PCA shows that the three eigenvalues are less than one, and suggests that the contamination sources are processing industries and traffic. HCA classifies heavy metals in two major groups. The cluster has two larger subgroups: the first contains only the variables Fe, Mn, Cu, Cr, Ni, and Pb, and the second includes Cd and Zn. The geostatistical analysis allows geological and anthropogenic causes of variations in the contents of roadside dust heavy metals to be separated and common pollution sources to be identified. The study shows that the high concentration of traffic flows, the parent material mineralogical and chemical composition, and land use are the main sources for the heavy metal concentration in the analyzed samples.     

Heavy mineral distribution as related to environmental conditions for modern beach sediments from the Susanoglu (Atakent,Mersin, Turkey)

Geochemical works were conducted on anthropogenically effective lithologic unit exposing along the Susanoglu coast in Mersin, Turkey. For this purpose, beach sand sediments from 33 stations were collected and heavy metal and oxide concentrations were analyzed. To determine the source of heavy metals (natural and anthropogenic), simple and multivariate statistical analyses were applied. According to factor analysis, three factors were determined. The first factor consists of SiO₂, Al₂O₃, Na₂O, K₂O, TiO₂, Cr, Ni, Cu and Mo and total variance is explained with 27.502% and expressed as “natural process factor”. These elements (Cr, Ni, Cu, Mo) are closely associated with geogenic materials and came from same sources of ultrabasic rocks (ophiolite). The second factor consists of CaO, MgO, TiO₂, MnO, Ni, Pb, Zn and W and total variance is explained with 21.505% and expressed as “anthropogenic factor”. These elements (Pb, Zn, Cd, V, W) are anthropogenic and are mainly due to the effluent or industrial input/activities and came from different sources of pollution in the study area. The third factor consists of Pb, Cd and Sb and total variance is explained with 9.748% and expressed as “intermediate factor”. The factor analysis and the cluster analysis are in support of each other. Cr, Ni, Co, Cd, Hg and Mo concentrations are greater than Turkish acceptable values and they show toxic effect. Al, Cu, Pb, Cd and Mo concentrations in beach sand deposits in the Susanoglu coast are found as 1.44, 1.26, 1.21, 1.02 and 1.04 mg/kg and higher than those in Kızkalesi beach sands. However, all other heavy metal contents are determined in low concentrations.     

An example of application of factor analysis on geochemical stream sediment survey in Umm Khariga Area, Eastern Desert, Egypt

Geochemical reconnaissance survey of Wadi Umm Khariga in the southern part of the Eastern Desert of Egypt was carried out in an area of 30 Km². The results of 79 stream sediment samples analyzed for Co, Cr, Cu, Fe, K, Li, Mn, Ni, Pb, Rb, Ti, and Zn after hot extraction with aqua regia were treated with simple and multivariate statistical methods. Titanium, Cu, Co, Ni, and Cr show lognormal distribution, whereas the other elements are normally distributed. The correlation between Fe and Mn and most of the analyzed elements suggest coprecipitation process that could be significant in controlling the distribution of these elements. Regression analysis was effective in correcting the effects of Fe and Mn by calculating the residuals. R-mode factor analysis produced a four-factor model, which accounts for 79.1% of the total variance in the data. Factor 1 (rCr, rCo, Ni) scores are correlated spatially with the area underlain by the serpentinites, metarhyolites, and metadacites. Factor 2 (rLi, rZn, rTi, Rb, K) scores are correlated with the metarhyolites, metadacites, and metapyroclastics. Factor 3 (Cu, rTi, Pb) scores characterize the metabasalts, meta-andesites, metarhyolites, and metadacites, thus reflecting the parent rocks as dominant influencing factors. Factor 4 (Mn, Fe) scores reflect the secondary environment effects. Discriminant analysis delineated an anomalous area for Co, Ni, Cr, Cu, Ti, Mn, Pb, and Li with probable occurrence of economic mineral deposits.     

雄安新区土壤重金属和砷元素空间分布特征及源解析

研究雄安地区土壤重金属和砷元素空间分布特征及其来源,对于支撑新区土地资源和环境管理具有重要意义。基于雄安新区土壤环境调查,运用地统计学方法和ArcGIS 技术分析模拟了土壤中As、Hg、Cd、Cu、Pb、Zn、Ni、Cr等8种元素空间分布特征,综合运用空间分析、多元统计学方法和正定因子矩阵模型解析这些元素的主要来源。结果表明:（1）区内土壤质量总体良好,4.35 %的土壤样品Cd和Cu含量超过农用地土壤污染风险筛选值,但均低于农用地土壤污染风险管控值;与河北省背景值相比,Cd、Cu、Pb、Zn和Hg存在不同程度中度和显著富集。（2）As、Cd、Cu、Pb、Zn、Ni、Cr含量呈现出由北部向南部逐渐增高的趋势,高值区主要分布在新区西南部;Hg元素分布分散,高值区主要分布在城镇及工业企业周边。（3）不同土地利用类型土壤剖面重金属和砷元素垂向分布受pH值、有机碳和铁铝氧化物等理化性质影响显著。（4）研究区土壤重金属和砷元素富集受人类活动影响明显,人为来源贡献率达67.12 %,Hg元素主要来源于人为排放的大气沉降富集,As元素富集受到废渣堆放和利用的影响,Cd、Cu、Pb和Zn元素富集受工业生产、污水灌溉以及尾气排放等活动影响。研究成果可为雄安新区合理制定土地资源开发利用和生态保护措施提供技术支撑。     

Heavy metal pollution in freshly deposited sediments of the Yamuna River (the Ganges River tributary): a case study from Delhi and Agra urban centres, India

 The Yamuna River sediments, collected from Delhi and Agra urban centres, were analysed for concentration and distribution of nine heavy metals by means of atomic adsorption spectrometry. Total metal contents varied in the following ranges (in mg/kg): Cr (157–817), Mn (515–1015), Fe (28,700–45,300), Co(11.7–28.4), Ni (40–538), Cu (40–1204), Zn (107–1974), Pb (22–856) and Cd (0.50–114.8). The degree of metal enrichment was compared with the average shale concentration and shows exceptionally high values for Cr, Ni, Cu, Zn, Pb and Cd in both urban centres. In the total heavy metal concentration, anthropogenic input contains 70% Cr, 74% Cu, 59% Zn, 46% Pb, 90% Cd in Delhi and 61% Cr, 23% Ni, 71% Cu, 72% Zn, 63% Pb, 94% Cd in Agra. A significant correlation was observed between increasing Cr, Ni, Zn, and Cu concentrations with increasing total sediment carbon and total sediment sulfur content. Based on the Müller's geoaccumulation index, the quality of the river sediments can be regarded as being moderately polluted to very highly polluted with Cr, Ni, Cu, Zn, Pb and Cd in the Delhi and Agra urban centres. The present sediment analysis, therefore, plays an important role in environmental measures for the Yamuna River and the planning of these city centres. Received: 21 June 1999 · Accepted: 1 October 1999     

Trace metal in beach sediments of Velanganni Coast,South India: application of autoclave leach method

The concentration of trace metals like Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were studied in beach and estuarine sediments of the Velanganni Coast, South East coast of India to understand metal pollution due to urbanization/industrialization. This area was affected by the urbanization activity like untreated effluent discharge, transportation and incineration of solid waste, etc. In this context, quality of the sediments was evaluated based on the enrichment factor, geo-accumulation index (Igeo), pollution load index, and sediment quality guidelines. Furthermore, correlation matrix and principal compound analyses have been performed with SPSS 7.5 statistical software. The result illustrated that the metal enrichment is in the following order: Cd > Cr > Ni > Zn > Pb > Mn > Cu. The level of Igeo suggests that Cd has moderately polluted the sediment class. Similarly, principal component analysis showed that Cd and Pb accounted for the anthropogenic pollution, but Pb inferred as its tracers level. The results strongly indicate anthropogenic sources for moderate input of Cd contamination in to Velanganni coastal sediments.