Insights about the formation of a complex impact structure formed in basalt from numerical modeling: The Vista Alegre structure,southern Brazil

We present the outcomes of simulations of the formation of the Vista Alegre impact structure, Paraná Basin, Brazil. The target comprised a thick sequence of volcanic rocks of predominantly basaltic composition of the Serra Geral Formation that had been deposited on top of sedimentary rocks (sandstones) of the Pirambóia/Botucatu formations. The cratering process was modeled using the iSALE shock physics code. Our best‐fit model suggests that (1) the crater was originally ~10 km in size; (2) it was formed in ~115 s by a stony projectile of 1000 m in diameter, for an assumed impact velocity of 12 km s^?1; (3) target rocks underwent a peak pressure of ~20 GPa, in agreement with previous petrographic investigations of shock deformation. Furthermore, the model points out that the sedimentary strata below the layer of volcanic rocks were raised by ~650 meters at the central part of the crater, which resulted in the current partial exposure of the sandstones at the surface. The outcomes of our modeling suggest that parameters like cohesion and strength of the target rocks, after shock compression, determined the final morphology of the crater, especially the absence of a topographically prominent central peak. Finally, the results of the numerical modeling are roughly in agreement with gravity data over the structure, in particular with respect to the presence of the uplifted sedimentary strata, which are responsible for a low gravity signature at the center of the structure.     

Melting and cataclastic features in shatter cones in basalt from the Vista Alegre impact structure,Brazil

Shatter cones are one of the most widely recognized pieces of evidence for meteorite impact events on Earth, but the process responsible for their formation is still debated. Evidence of melting on shatter cone surfaces has been rarely reported in the literature from terrestrial impact craters but has been recently observed in impact experiments. Although several models for shatter cones formation have been proposed, so far, no one can explain all the observed features. Shatter cones' from the Vista Alegre impact structure, Brazil, formed in fine‐grained basalt of the Jurassic‐Cretaceous Serra Geral Formation (Paraná large igneous province). A continuous quenched melt film, consisting of a crystalline phase, mica, and amorphous material, decorates the striated surface. Ultracataclasites, containing subrounded pyroxene clasts in an ultrafine‐grained matrix, occur subparallel to the striated surface. Several techniques were applied to characterize the crystalline phase in the melt, including Raman spectroscopy and transmission electron microscopy. Results are not consistent with any known mineral, but they do suggest a possible rare or new type of clinopyroxene. This peculiar evidence of melting and cataclasis in relation with shatter cone surfaces is interpreted as the result of tensile fracturing at the tip of a fast propagating shock‐induced rupture, which led to the formation of shatter cones at the tail of the shock front, likely during the early stage of the impact events.     

The Iguaraçu H5 chondrite: a fall from Paraná State,Brazil

Abstract— The Iguaraçu meteorite, a single stone of 1200 g, fell in Paraná State, Brazil in October 1977. It is classified as an H5 ordinary chondrite with olivine of composition Fa 18.7.     

Geology and impact features of Vargeão Dome,southern Brazil

Abstract– Vargeão Dome (southern Brazil) is a circular feature formed in lava flows of the Lower Cretaceous Serra Geral Formation and in sandstones of the Paraná Basin. Even though its impact origin was already proposed in the 1980s, little information about its geological and impact features is available in the literature. The structure has a rim‐rim diameter of approximately 12 km and comprises several ring‐like concentric features with multiple concentric lineaments. The presence of a central uplift is suggested by the occurrence of deformed sandstone strata of the Botucatu and Pirambóia formations. We present the morphological/structural characteristics of Vargeão Dome, characterize the different rock types that occur in its interior, mainly brecciated volcanic rocks (BVR) of the Serra Geral Formation, and discuss the deformation and shock features in the volcanic rocks and in sandstones. These features comprise shatter cones in sandstone and basalt, as well as planar microstructures in quartz. A geochemical comparison of the target rock equivalents from outside the structure with the shocked rocks from its interior shows that both the BVRs and the brecciated sandstone have a composition largely similar to that of the corresponding unshocked lithologies. No traces of meteoritic material have been found so far. The results confirm the impact origin of Vargeão Dome, making it one of the largest among the rare impact craters in basaltic targets known on Earth.     

Geology and impact features of Riachão structure,northern Brazil

Riachão, located at S7°42′/W46°38′ in Maranhão State, northeastern Brazil, is a complex impact structure of about 4.1 km diameter, formed in Pennsylvanian to Permian sedimentary rocks of the Parnaíba Basin sequence. Although its impact origin was already proposed in the 1970s, information on its geology and shock features is still scarce in the literature. We present here the main geomorphological and geological characteristics of the Riachão impact structure obtained by integrated geophysical and remote sensing analysis, as well as geological field work and petrographic analysis. The identified lithostratigraphic units consist of different levels of the Pedra de Fogo Formation and, possibly, the Piauí Formation. Our petrographic analysis confirms the presence of shock‐diagnostic planar microdeformation structures in quartz grains of sandstone from the central uplift as evidence for an impact origin of the Riachão structure. The absence of crater‐filling impact breccias and melt rocks, shatter cones, as well as the restricted occurrence of microscopic shock effects, suggests that intense and relatively deep erosion has occurred since crater formation.     

Kgagodi Basin: The first impact structure recognized in Botswana

Abstract— The 3.4 km wide, so‐called Kgagodi Basin structure, which is centered at longitude 27°34.4′ E and latitude 22°28.6′ S in eastern Botswana, has been confirmed as a meteorite impact structure. This crater structure was first recognized through geophysical analysis; now, we confirm its impact origin by the recognition of shock metamorphosed material in samples from a drill core obtained close to the crater rim. The structure formed in Archean granitoid basement overlain and intruded by Karoo dolerite. The crater yielded a gravity model consistent with a simple bowl‐shape crater form. The drill core extends to a depth of 274 m and comprises crater fill sediments to a depth of 158 m. Impact breccia was recovered only between 158 and 165 m depth, below which locally brecciated basement granitoids grade into fractured and eventually undeformed crystalline basement, from ～250 m depth. Shock metamorphic effects were only found in granitoid clasts in the narrow breccia zone. This breccia is classified as suevitic impact breccia due to the presence of melt and glass fragments, at a very small abundance. The shocked grains are exclusively derived from granitoid target material. Shock effects include multiple sets of planar deformation features in quartz and feldspar; diaplectic quartz, and partially and completely isotropized felsic minerals, and rare melt fragments were encountered. Abundances of some siderophile elements and especially, Ir, in suevitic breccia samples are significantly elevated compared to the contents in the target rocks, which provides evidence for the presence of a small meteoritic component. Kgagodi is the first impact structure recognized in the region of the Kalahari Desert in southern Africa. Based on lithological and first palynological evidence, the age of the Kgagodi structure is tentatively assigned to the upper Cretaceous to early Tertiary interval. Thus, the crater fill has the potential to provide a long record of paleoclimatic conditions.     

Structural evolution of the 40 km wide Araguainha impact structure,central Brazil

Abstract— The 40 km wide Araguainha structure in central Brazil is a shallowly eroded impact crater that presents unique insights into the final stages of complex crater formation. The dominant structural features preserved at Araguainha relate directly to the centripetal movement of the target rocks during the collapse of the transient cavity. Slumping of the transient cavity walls resulted in inward‐verging inclined folds and a km‐scale anticline in the outer ring of the structure. The folding stage was followed by radial and concentric faulting, with downward displacement of kilometer‐scale blocks around the crater rim. The central uplift records evidence for km‐scale upward movement of crystalline basement rocks from the transient cavity floor, and lateral moment of sedimentary target rocks detached from the cavity walls. Much of the structural grain in the central uplift relates to structural stacking of km‐scale thrust sheets of sedimentary strata onto the core of crystalline basement rocks. Outward‐plunging radial folds indicate tangential oblate shortening of the strata during the imbrication of the thrust sheets. Each individual sheet records an early stage of folding and thickening due to non‐coaxial strains, shortly before sheet imbrication. We attribute this folding and thickening phase to the kilometer‐scale inward movement of the target strata from the transient cavity walls to the central uplift. The outer parts of the central uplift record additional outward movement of the target rocks, possibly related to the collapse of the central uplift. An inner ring structure at 10–12 km from the crater center marks the extent of the deformation related to the outward movement of the target rocks.     

Shatter cones and planar deformation features confirm Santa Marta in Piauí State,Brazil, as an impact structure

A total of 184 confirmed impact structures are known on Earth to date, as registered by the Earth Impact Database . The discovery of new impact structures has progressed in recent years at a rather low rate of about two structures per year. Here, we introduce the discovery of the approximately 10 km diameter Santa Marta impact structure in Piauí State in northeastern Brazil. Santa Marta is a moderately sized complex crater structure, with a raised rim and an off‐center, approximately 3.2 km wide central elevated area interpreted to coincide with the central uplift of the impact structure. The Santa Marta structure was first recognized in remote sensing imagery and, later, by distinct gravity and magnetic anomalies. Here, we provide results obtained during the first detailed ground survey. The Bouguer anomaly map shows a transition from a positive to a negative anomaly within the structure along a NE–SW trend, which may be associated with the basement signature and in parts with the signature developed after the crater was formed. Macroscopic evidence for impact in the form of shatter cones has been found in situ at the base around the central elevated plateau, and also in the interior of fractured conglomerate boulders occurring on the floor of the surrounding annular basin. Planar deformation features (PDFs) are abundant in sandstones of the central elevated plateau and at scattered locations in the inner part of the ring syncline. Together, shatter cones and PDFs provide definitive shock evidence that confirms the impact origin of Santa Marta. Crystallographic orientations of PDFs occurring in multiple sets in quartz grains are indicative of peak shock pressures of 20–25 GPa in the rocks exposed at present in the interior of the crater. In contrast to recent studies that have used additional, and sometimes highly controversial, alleged shock recognition features, Santa Marta was identified based on well‐understood, traditional shock evidence.     

Red Wing Creek structure,North Dakota: Petrographical and geochemical studies,and confirmation of impact origin

Abstract The 9 km diameter Red Wing Creek structure, North Dakota, is located within the oil-rich Williston Basin at 47°36′N and 103°33′W. Earlier geophysical studies indicated that this subsurface structure has a central uplift, surrounded by an annular crater moat, and a raised rim. Breccias were encountered during drilling between ～2000 and 2800 m depth in the central uplift area, and the presence of shatter cone fragments in drill core samples was suggested to indicate an impact origin of the Red Wing Creek structure. We studied the petrographic and geochemical characteristics of samples of well cuttings from two boreholes at the center of the structure: the True Oil 22–27 Burlington Northern and True Oil 11–27 Burlington Northern wells. We found planar deformation features (PDFs) in quartz with up to three sets of different crystallographic orientations in sandstone- and siltstone-dominated samples from the True Oil 11–27 borehole. U-stage measurements of the crystallographic orientations of the PDFs showed the occurrence of the shock-characteristic (0001), and orientations, with a dominance of (0001) and orientations. The relative frequencies of the orientations indicate a shock pressure of at least 12–20 GPa. These results provide unambiguous evidence for shock metamorphism at Red Wing Creek and confirm that the structure was formed by impact.     

The first large meteorite impact structure discovered in the Middle East: Jebel Waqf as Suwwan,Jordan

Abstract— Triggered by re‐evaluation of a 1960s report on the regional geology of the northeastern border region of Jordan and following Landsat satellite image investigation, a 5.5 km diameter, complex, circular structure was discovered in the central eastern region of the Kingdom of Jordan. Initial ground truthing revealed complex geological structures involving Upper Cretaceous and Paleogene strata, and including a prominent outer rim rising up to 60 m above the surrounding plain, an intermediate ring of up to 20 m elevation within a ring syncline, and a central zone of stratigraphically uplifted sedimentary strata characterized by intense macroscopic (folding and faulting, widespread cataclasis) and locally mesoscopic (cataclasis) deformation. Ten sites with shatter cone development in fine‐grained sandstone or limestone have been mapped to date, mostly in the outer parts of the central uplifted area. This finding confirms that the Jebel Waqf as Suwwan structure was formed as the result of the impact of an extraterrestrial projectile. Search for impact‐diagnostic micro‐deformation has been rather unsuccessful: only 1 quartz grain with both planar deformation features and planar fractures has been detected in a sandstone sample to date. The overall majority of the approximately 70 samples investigated by micropetrographic analysis consist of extremely fine‐grained chert, siltstone, or marly limestone. Cataclasis is widespread in chert and limestone, also on the micro‐scale. Considering the severely limited amount of characteristic impact microdeformation, and the stratigraphic situation within the central uplift, it is likely that a relatively deep level of the central uplift is currently exposed. The extensive drainage demonstrated for this region supports the conclusion that this impact structure could be quite deeply eroded‐especially as its geology involves some relatively soft lithologies (marls, limestones). The age of this impact event is at present poorly constrained at post‐Middle to Lower Eocene.     

Geophysical investigation of the Colônia structure,Brazil

The origin of the nearly circular Colônia structure, located at the southwestern edge of the city of São Paulo, Brazil, has been the subject of a long‐standing debate, ever since the 1960s when the structure was first investigated by geophysical methods. The structure still raises interest for geological research, as its sedimentary infill holds important paleoclimatic information about the evolution of the tropical rainforest, as well as the interplay between the South American summer monsoon, the Intertropical Convergence Zone, and the southern Westerly wind belt—for possibly as long as several million years. In addition, the search for evidence to conclusively establish the origin of this structure continues, and the answer most likely lies in the lower portions of the basin's sedimentary infill, which also holds a significant potential for underground water resources. Here, we present the results from recent seismic (reflection and HVSR), gravimetric, and geoelectrical surveys. They have provided a reliable image of the sedimentary infill, and the maximum depth to basement within the structure has been constrained consistently by the different methods to approximately ?400 m. The geophysical data have also allowed to map the lateral contact between the crystalline basement rocks and the sedimentary infill, which indicates a diameter of approximately 2.8 km for the sedimentary basin, with 3.6 km being the diameter of the outermost limit of the structure. A total of six seismic stratigraphic boundaries were identified within the sedimentary infill, providing a framework for the planning of a deep drilling campaign and subsequent sampling program aimed at geological and paleoclimatology studies.     

40Ar/39Ar dating of the Araguainha impact structure,Mato Grosso,Brazil

Abstract— Pursuing the exploration of the Araguainha impact structure (Engelhardt et al., 1992), we present ⁴⁰Ar/³⁹Ar ages (1) of biotite samples from the granite, which forms the central uplift of the structure, and (2) of a melt rock, formed by the impact. Total degassing ages of biotites from granite samples range from 326 to 481 Ma. The variation is explained by Ar losses due to the oxidation of divalent Fe and by removal of K. The K loss depends on the time that the granite was exposed to weathering at particular outcrops. The oldest age of the least oxidized biotite from a granite sample, collected at a site most recently exposed, signifies that the ascending granite passed the 300° isotherm earlier than 481 Ma ago. Early Devonian Furnas sandstones, the oldest sediments exposed by the impact, were deposited on this granite basement 410–396 Ma ago. The ⁴⁰Ar/³⁹Ar analyses of two size fractions of an impact melt rock, resulting in plateau ages of 245.5 ± 3.5 Ma and 243.3 ± 3.0 Ma, respectively, indicate that the Araguainha impact occurred close to the Permian-Triassic boundary.     

Hydrothermal alteration in the core of the Yaxcopoil‐1 borehole,Chicxulub impact structure,Mexico

Abstract Petrographic, electron microprobe, and Raman spectrometric analyses of Yaxcopoil‐1 core samples from the Chicxulub crater indicate that the impact generated a hydrothermal system. Relative textural and vein crosscutting relations and systematic distribution of alteration products reveal a progression of the hydrothermal event in space and time and provide constraints on the nature of the fluids. The earliest calcite, halite, and gaylussite suggest that the impactite sequence was initially permeated by a low temperature saline brine. Subsequent development of a higher temperature hydrothermal regime is indicated by thermal metamorphic diopside‐hedenbergite (Aeg₃Fs_18‐33En_32‐11Wo_47‐53) after primary augite and widespread Na‐K for Ca metasomatic alkali exchange in plagioclase. Hydrothermal sphene, apatite, magnetite + (bornite), as well as early calcite (combined 3 to 8 vol%) were introduced with metasomatic feldspar. A lower temperature regime characterized by smectite after probable primary glass, secondary chlorite, and other pre‐existing mafic minerals, as well as very abundant calcite veins and open‐space fillings, extensively overprinted the early hydrothermal stage. The composition of early and late hydrothermal minerals show that the solution was chlorine‐rich (Cl/F >10) and that its Fe/Mg ratio and oxidation state increased substantially (4 to 5 logfO₂ units) as temperature decreased through time. The most altered zone in the impactite sequence occurs 30 m above the impact melt. The lack of mineralogical zoning about the impact melt and convective modeling constraints suggest that this unit was too thin at Yaxcopoil‐1 to provide the necessary heat to drive fluids and implies that the hydrothermal system resulted from the combined effects of a pre‐existing saline brine and heat that traveled to the Yaxcopoil‐1 site from adjacent areas where the melt sheet was thicker. Limonite after iron oxides is more common toward the top of the sequence and suggests that the impactite section was subjected to weathering before deposition of the Tertiary marine cover. In addition, scarce latest anatase stringers, chalcopyrite, and barite in vugs, francolite after apatite, and recrystallized halite are the likely products of limited post‐hydrothermal ambient‐temperature diagenesis, or ocean and/or meteoric water circulation.     

Kamenetsk—A new impact structure in the Ukrainian Shield

The Kamenetsk impact structure is a deeply eroded simple crater that formed in crystalline rocks of the Ukrainian Shield. This study presents structural, lithologic, and shock metamorphic evidence for an impact origin of the Kamenetsk structure, which was previously described as a paleovolcano. The Kamenetsk structure is an oval depression that is 1.0–1.2 km in diameter and 130 m deep. The structure is deeply eroded, and only the lower part of the sequence of lithic breccia has been preserved in the deepest part of the crater to recent time, while the predominant part of impact rocks and postimpact sediments was eroded. Manifestations of shock metamorphism of minerals, especially planar deformation features in quartz and feldspars, were determined by petrographic investigations of lithic breccia that allowed us to determine the impact origin of the Kamenetsk structure. The erosion of the crater and surrounding target to a minimal depth of 220 m preceded the deposition of the postimpact sediments. The time of the formation of the Kamenetsk structure is bracketed within a wide interval from 2.0 to 2.1 Ga, the age of the crystalline target rocks, to the Late Miocene age of the sediments overlaying the crater. The deep erosion of the structure suggests it is probably Paleozoic in age.     

Investigation of Shuttle Radar Topography Mission data of the possible impact structure at Serra da Cangalha,Brazil

Abstract— The Serra da Cangalha crater structure in northeast Brazil, ?13 km in diameter, has long been widely considered to be a confirmed impact structure, based on reports of shatter cone findings. Only very limited field work has been carried out at this crater structure. Landsat Thematic Mapper (TM) and Shuttle Radar Topography Mission (SRTM) data sets for the region around this crater structure are compared here with regard to their suitability to determine first‐order structural detail of impact crater structures. The SRTM data provide very detailed information regarding drainage patterns and topography. A pronounced central ring of up to 300 m elevation above the surrounding area, two comparatively subdued intermediate rings of 6 and 10.5 km diameter, respectively, and the broad, complex crater rim of up to >100 m elevation can be distinguished in the Serra da Cangalha data. The maximum cratering‐related regional deformation (radial and concentric features) seems to be limited to a radial distance of 16–18 km from the center of the structure. A first comparison of macrostructural information from several impact structures with that from Serra da Cangalha does not yield firm trends, but the database is still very small at this stage. The varied nature of the target geology strongly influences the development of structural features in any impact event.     

Physical properties of the Yaxcopoil‐1 deep drill core,Chicxulub impact structure,Mexico

Abstract– The Chicxulub structure in Mexico, one of the largest impact structures on Earth, was formed 65 Ma by a hypervelocity impact that led to the large mass extinction at the K‐Pg boundary. The Chicxulub impact structure is well preserved, but is buried beneath a sequence of carbonate sediments and, thus, requires drilling to obtain subsurface information. The Chicxulub Scientific Drilling Program was carried out at Hacienda Yaxcopoil in the framework of the International Continental Scientific Drilling Program in 2001–2002. The structure was cored from 404 m down to 1511 m, through three intervals: 794 m of postimpact Tertiary sediments, a 100 m thick impactite sequence, and 616 m of preimpact Cretaceous rocks thought to represent a suite of megablocks. Physical property investigations show that the various lithologies, including the impactite units and the K‐Pg boundary layer, can be characterized by their physical properties, which depend on either changes in fabric or on mineralogical variations. The magnetic properties show mostly dia‐ or paramagnetic behavior, with the exception of the impactite units that indicate the presence of ferromagnetic, probably hydrothermally deposited magnetite and pyrrhotite. The magnetic fraction contributes mainly to enhanced magnetization in the impactite lithologies and, in this way, to the observed magnetic anomalies. The shape and orientation of the magnetic grains are varied and reflect inhomogeneous fabric development and the influence of impact‐related redeposition and hydrothermal activity. The Chicxulub impact occurred at the time of the reverse polarity geomagnetic chron 29R, and this finding is consistent with the age of the K‐Pg boundary.     

The age of the Kara impact structure,Russia

Abstract— For the ～65 km sized Kara impact structure close to the polar Ural, we report an age of 70.3 ± 2.2 Ma (2s?), defined by the mean of ⁴⁰Ar-³⁹Ar plateau ages for three glassy or crystalline impact melt rocks cleaned from mineral and rock clasts. The fine structure of the age spectra of these samples can quantitatively be simulated by modeling taking into account ³⁹Ar recoil effects, without assuming the presence of excess Ar. The calculations corroborate our age results by showing that ³⁹Ar recoil does not affect the plateau fractions. Previously, Kara has been proposed as a probable K/T impact site or was related to the Campanian-Maastrichtian boundary at 73 Ma. At the 2s? level, both suggestions are ruled out by the well-constrained age for the Kara impact structure.     

Magnetostratigraphy of the impact breccias and post‐impact carbonates from borehole Yaxcopoil‐1, Chicxulub impact crater,Yucatán,Mexico

Abstract— We report the magnetostratigraphy of the sedimentary sequence between the impact breccias and the post‐impact carbonate sequence conducted on samples recovered by Yaxcopoil‐1 (Yax‐1). Samples of impact breccias show reverse polarities that span up to ～56 cm into the post‐impact carbonate lithologies. We correlate these breccias to those of PEMEX boreholes Yucatán‐6 and Chicxulub‐1, from which we tied our magnetostratigraphy to the radiometric age from a melt sample from the Yucatán‐6 borehole. Thin section analyses of the carbonate samples showed a significant amount of dark minerals and glass shards that we identified as the magnetic carriers; therefore, we propose that the mechanism of magnetic acquisition within the carbonate rocks for the interval studied is detrital remanent magnetism (DRM). With these samples, we constructed the scale of geomagnetic polarities where we find two polarities within the sequence, a reverse polarity event within the impact breccias and the base of the post‐impact carbonate sequence (up to 794.07 m), and a normal polarity event in the last ～20 cm of the interval studied. The polarities recorded in the sequence analyzed are interpreted to span from chron 29r to 29n, and we propose that the reverse polarity event lies within the 29r chron. The magnetostratigraphy of the sequence studied shows that the horizon at 794.11 m deep, interpreted as the K/T boundary, lies within the geomagnetic chron 29r, which contains the K/T boundary.     

Araguainha impact crater,Brazil. I. The interior part of the uplift

Abstract— The central uplift of the 40-km wide Araguainha impact structure, Brazil, consists of a ring, about 8 km in diameter, of up to 150-m high blocks of Devonian Furnas sandstone, which surround a central depression of elliptical shape (4.5 × 3.0 km). The depression is occupied by a pre-Devonian alkali-feldspar granite, shocked by pressures of 20–25 GPa and permeated by cataclastic shear zones and dikes of shocked granitic material. The granite is flanked and partly covered by several impact breccias: (1) Impact breccia with melt matrix overlies the granite in places and forms hills, bordering the granitic center in the S and SW. It is chemically identical with the granite and consists of thermally altered granitic clasts in a matrix of sanidine, quartz, biotite, muscovite, chlorite and riebeckite. (2) Polymict breccias form hills which border the central depression in the N and NW. Components are unshocked and shocked sediments, shock-melted sandstone, shocked granite and shock melt rocks in irregular masses and individual bodies, embedded in a fine-grained matrix. ⁴⁰Ar/³⁹Ar analyses show that the melt rocks solidified 246 Ma ago, indicating that the impact occurred at near the Permian-Triassic boundary, possibly when the area was covered by a shallow sea. The present chemistry and petrography of the melt rocks suggest that by reacting with seawater granitic impact melt was depleted of K and Rb and enriched in Na, and that later diagenetic processes produced replacement of feldspar by quartz and deposition of hematite. (3) Monomict breccias, consisting of unshocked, shocked and shock-fused quartz sandstones, form hills which surround the central depression in the SE and S. The Araguainha structure is an eroded complex crater, produced by an impact, 246 Ma ago. The depth of excavation was about 2.4 km, comprising Permian, Permo-Carboniferous and Devonian sediments and the granitic basement. The diameter of the transient crater was about 24 km. Erosion and weathering have removed most of the original crater fill and ejecta deposits, with the exception of remnants, preserved in the central uplift.