Metamorphic and structural history of continental crust at a Mesozoic collisional margin, the Ruby terrane, central Alaska

Abstract The Ruby terrane is an elongate fragment of continental crustal rocks that is structurally overlain by thrust slices of oceanic crust. Our results from the Kokrines Hills, in the south-central part of the Ruby terrane, demonstrate that the low-angle schistose fabric formed under high- P /low- T conditions, at peak conditions of 10.8-13.2 kbar and 425-550° C, consistent with the rare occurrence of glaucophane. White mica ⁴⁰Ar/³⁹Ar cooling ages from these blueschists indicate that the metamorphism occurred prior to 144 ± 1 Ma. The blueschist facies assemblages are partially replaced by greenschist facies assemblages in the eastern Kokrines Hills. In contrast, in the central and western Kokrines Hills, upper amphibolite to lower granulite facies metamorphism associated with extensive late Early Cretaceous plutonism has completely overprinted any evidence of an earlier high- P/T metamorphic history. Deformation accompanying the plutonism produced recumbent isoclinal folds in the plutonic rocks and pelitic gneisses of the wallrock; decompression reactions in the pelitic gneisses suggest that the deformation occurred during exhumation. Thermochronological data bracket the time of intrusion and cooling below 500° C between 118 ± 3 and 109 ± 1 Ma.
Our data from the schists of the Ruby terrane support the general assumption of many authors that the Ruby terrane was subducted beneath an oceanic island arc. This tectonic history is similar to that described for other large continental crustal blocks in northern and central Alaska, in the Brooks Range, Seward Peninsula and Yukon-Tanana Upland. The current orientation of the Ruby terrane at an oblique angle to these other crustal blocks and to the Cordilleran trend is due to post-collisional tectonic processes that have greatly modified the original continental margin.     

P–T evolution of the Teslin suture zone and Cassiar tectonites, Yukon, Canada: evidence for A- and B-type subduction

Mineral composition and quantitative thermobarometric studies indicate that the Teslin-Taylor Mountain and Nisutlin terranes within the Teslin suture zone (TSZ), Yukon, record widespread high-P/T metamorphic conditions consistent with subduction zone dynamothermal metamorphism. The highest P–T conditions (575–750° C and 9–17 kbar) are preserved in tectonites formed during normal dip-slip ductile shear. Dextral strike-slip tectonites record lower P–T conditions (400–550° C and 5–8 kbar), and tectonites which show reverse shear have peak temperatures of c. 420° C and a minimum peak pressure of 3 kbar. Dynamothermal metamorphism took place in a west-dipping B-type subduction zone outboard of western North America in Permo-Triassic time. TSZ tectonites were underplated against the hangingwall plate of the subduction zone. Following subduction of the ocean basin which separated North America from the hangingwall plate, TSZ tectonites were overthrust eastward as a coherent structural package as a result of A-type subduction of Cassiar strata in early Jurassic time. (Par)autochthonous Cassiar tectonites, which comprised the leading edge of the western North American margin, record prograde moderate-P, high-T metamorphism (550–750° C and 7–13 kbar) synchronous with top-to-the-east ductile shear. Metamorphism occurred as a result of subduction of the North American margin into the TSZ subduction zone in early Jurassic time. Following metamorphism Cassiar tectonites cooled slowly from 500 to 300° C during the period middle Jurassic to middle Cretaceous. TSZ and Cassiar tectonites were deformed during changing P–T conditions. Data from each of these tectonite packages indicate that grain-scale strain partitioning may have allowed local recrystallization of individual minerals by the addition of mechanical energy. The composition of the new grains reflects the P–T conditions under which that particular grain was deformed.     

P-T conditions of earliest Late Cretaceous metamorphism in the Western Sonobari Complex,northwestern Mexico: tectonic implications

The Western Sonobari Complex in northwestern Mexico consists of metamorphosed rocks mostly derived from Palaeozoic (?) sedimentary and Mesozoic igneous protoliths. Rocks of this complex display amphibolite facies orogenic metamorphism, pervasive foliation, migmatization, and four folding phases. These features are ascribed to a contractional tectonic event with NNW–SSE shortening direction, which caused thrusting, thickening of the crust, and sinking of the lithological units. U–Pb geochronology of migmatitic leucosome bands indicates that peak metamorphic conditions were reached between ~93 and 89 Ma. Post-tectonic Late Cretaceous peraluminous aplite-pegmatite dikes transect the metamorphic foliation. Traditional thermobarometry in the metamorphic rocks yields average pressures and temperatures of 9.0–7.1 kbar and 745–663°C, typical of intermediate P/T Barrovian metamorphism. On the basis of its age and contractional character, the thickening event originating the metamorphism may be related to collision of the Alisitos island arc against crustal blocks of Mexico. Thermobarometric data of post-tectonic intrusives including Late Cretaceous granodiorite and Eocene gabbro indicate emplacement within an overthickened crust, while P-T conditions of post-tectonic dikes point towards an almost isothermal decompression path along the amphibolite facies field. Rock units of similar age and metamorphic character are discontinuously exposed from the Islas Marias offshore the Nayarit coast to the Peninsular Ranges batholith of Baja California, and even extend north into the Sierra Nevada batholith and the Sevier hinterland. This extensive belt of Barrovian metamorphic rocks thus provides a record of middle Cretaceous shortening and crustal thickening related to arc-continent collision followed by subduction resuming.     

Transitional blueschist–epidote amphibolite facies metamorphism in the Frankenberg massif, Germany, and geotectonic implications

Bimodal metavolcanic rocks, granitic gneisses and metasediments are associated in the Frankenberg massif, Germany. These rocks are faulted against underlying very low-grade Palaeozoic sequences and adjacent metamorphic complexes of the Variscan basement. The granitic gneisses record an Rb–Sr whole-rock isochron age of 461±20  Ma that is taken as at least a minimum protolith age. The bimodal meta-igneous suites are interpreted to have formed during rifting of the Gondwana continental margin in the Cambro-Ordovician. The various metamorphic units have all experienced a common P–T  history. The peak-pressure stage is constrained to around 490–520  °C and 10–14  kbar (10–12  kbar being most realistic). The metamorphism proceeded along a clockwise P–T path towards conditions of around 580–610  °C and 7–8.5  kbar at the thermal peak followed by a final low-pressure overprint which spanned amphibolite facies to prehnite–actinolite facies temperatures. Owing to a secondary Rb–Sr whole-rock isochron age of 381±24  Ma, interpreted to date the retrograde stage, the whole metamorphic cycle in the Frankenberg massif is ascribed to the late Silurian–early Devonian high-pressure event widely recorded in the European Variscides. The antiformal complexes bordering the Frankenberg massif underwent a well-documented early Carboniferous metamorphism, suggesting that the Frankenberg massif constitutes a klippe which was overthrust towards the end of this second metamorphic cycle.     

Mesozoic tectonic evolution of the southwest continental Iberian Margin

An extensional event affected the southwest Margin of Iberia during Late Triassic to Early Cretaceous times, giving place to the Algarve basin. This basin was subjected to tectonic instability and it became infilled with siliciclastic and carbonate sequences with abundant interspersed volcanic rocks. Normal and strike-slip faults accommodated the deformation in the Algarve basin. The presence of a single flat or listric detachment surface is inferred from the study of hanging-wall structures. The dynamic and kinematic analyses of fault systems in the Spanish exposure of the Algarve basin allow us to establish three extensional phases. 1) A Late Triassic to Hettangian NE-SW directed extension associated with the initial breaking of Pangea and the opening of the Tethys in the eastern Mediterranean. 2) NW-SE extension from the Sinemurian to the Callovian, interpreted as a result of the activity as a sinistral fault of the Azores-Gibraltar transform boundary. 3) Finally, E-W extension during the Late Jurassic and Cretaceous, related to the North Atlantic rifting process.     

Late Mesozoic tectonic structure and evolution along the present-day northeastern South China Sea continental margin

The northeastern South China Sea continental margin holds the key to understanding Late Mesozoic tectonics and evaluating hydrocarbon potentials in Mesozoic tectonic and stratigraphic structures offshore southeast China. With newly obtained and processed seismic data, and new drilling and logging data, we correlate regional Mesozoic stratigraphy and analyze major Mesozoic tectonic events and structures. In particular, we focus our study on the three major tectonic units in the area, the Chaoshan Depression, the Tainan Basin, and the Dongsha–Penghu Uplift, which are separated by basement high, thrust fold, and (or) faults. Stratigraphic correlations suggest a major phase of southeastward regression, spanning in time from the late Early Jurassic (180 Ma) to the Early Cretaceous (120 Ma). Seismic data reveal two major tectonic events, with the first one in the Late Jurassic to the Early Cretaceous, contemporary with the regression, and the second one in the Late Cretaceous. Regional magnetic anomaly map after the reduction to the pole clearly reveals the boundary between the Dongsha–Penghu Uplift and the Chaoshan–Tainan depositional system. The seismic and magnetic data also suggest that, while the Dongsha–Penghu Uplift has highly magnetized sources buried mostly in the upper crust at depths from about 2 km to about 20 km, the Chaoshan–Tainan depositional system has thick Mesozoic sediments of low magnetization.     

High-pressure granulite facies metamorphism in the Pan-African belt of eastern Tanzania: P–T–t evidence against granulite formation by continent collision

To constrain the tectonic history of the Pan-African belt in Tanzania, we have studied the P–T evolution of granulites from northern and eastern Tanzania representative for a large part of the southern Pan-African belt of East Africa (e.g. Pare, Usambara, Ukaguru and Uluguru Mountains). Thermobarometry (conventional and multireaction equilibria) on enderbites and metapelites gives 9.5–11 kbar and 810±40 °C during peak metamorphism at 650–620 Ma. This is consistent with the occurrence of both sillimanite and kyanite in metapelites and of the high-P granulite facies assemblage garnet–clinopyroxene–quartz in mafic rocks. Peak metamorphic conditions are surprisingly similar over a very large area with N-S and E-W extents of about 700 and 200 km respectively. The prograde metamorphic evolution in the entire area started in the kyanite field but evolved mainly within the sillimanite stability field. The retrograde P–T evolution is characterized by late-stage kyanite in metapelites and garnet–clinopyroxene coronas around orthopyroxene in meta-igneous rocks. This is in agreement with thermobarometric results and isotopic dating, indicating a period of nearly isobaric and slow cooling prior to tectonic uplift. The anticlockwise P–T path could have resulted from magmatic underplating and loading of the lower continental crust which caused heating and thickening of the crust. Substantial postmetamorphic crustal thickening of yet unknown age (presumably after 550 Ma) led subsequently to the exhumation of high-P granulites over a large area. The results are consistent with formation of the Pan-African granulites at an active continental margin where tonalitic intrusions caused crustal growth and heating 70–100 Ma prior to continental collision. The P–T–t path contradicts recent geodynamic models which proposed tectonic crustal thickening due to continental collision between East and West Gondwana as the cause of granulite formation in the southern part of the Pan-African belt.     

Plate tectonic evolution of the southern margin of Eurasia in the Mesozoic and Cenozoic

Thirteen time interval maps were constructed, which depict the Triassic to Neogene plate tectonic configuration, paleogeography and general lithofacies of the southern margin of Eurasia. The aim of this paper is to provide an outline of the geodynamic evolution and position of the major tectonic elements of the area within a global framework. The Hercynian Orogeny was completed by the collision of Gondwana and Laurussia, whereas the Tethys Ocean formed the embayment between the Eurasian and Gondwanian branches of Pangea. During Late Triassic–Early Jurassic times, several microplates were sutured to the Eurasian margin, closing the Paleotethys Ocean. A Jurassic–Cretaceous north-dipping subduction boundary was developed along this new continental margin south of the Pontides, Transcaucasus and Iranian plates. The subduction zone trench-pulling effect caused rifting, creating the back-arc basin of the Greater Caucasus–proto South Caspian Sea, which achieved its maximum width during the Late Cretaceous. In the western Tethys, separation of Eurasia from Gondwana resulted in the formation of the Ligurian–Penninic–Pieniny–Magura Ocean (Alpine Tethys) as an extension of Middle Atlantic system and a part of the Pangean breakup tectonic system. During Late Jurassic–Early Cretaceous times, the Outer Carpathian rift developed. The opening of the western Black Sea occurred by rifting and drifting of the western–central Pontides away from the Moesian and Scythian platforms of Eurasia during the Early Cretaceous–Cenomanian. The latest Cretaceous–Paleogene was the time of the closure of the Ligurian–Pieniny Ocean. Adria–Alcapa terranes continued their northward movement during Eocene–Early Miocene times. Their oblique collision with the North European plate led to the development of the accretionary wedge of the Outer Carpathians and its foreland basin. The formation of the West Carpathian thrusts was completed by the Miocene. The thrust front was still propagating eastwards in the eastern Carpathians.During the Late Cretaceous, the Lesser Caucasus, Sanandaj–Sirjan and Makran plates were sutured to the Iranian–Afghanistan plates in the Caucasus–Caspian Sea area. A north-dipping subduction zone jumped during Paleogene to the Scythian–Turan Platform. The Shatski terrane moved northward, closing the Greater Caucasus Basin and opening the eastern Black Sea. The South Caspian underwent reorganization during Oligocene–Neogene times. The southwestern part of the South Caspian Basin was reopened, while the northwestern part was gradually reduced in size. The collision of India and the Lut plate with Eurasia caused the deformation of Central Asia and created a system of NW–SE wrench faults. The remnants of Jurassic–Cretaceous back-arc systems, oceanic and attenuated crust, as well as Tertiary oceanic and attenuated crust were locked between adjacent continental plates and orogenic systems.     

Inverted metamorphism and the Main Central Thrust: field relations and thermobarometric constraints from the Kishtwar Window, NW Indian Himalaya

Following the early Eocene collision of the Indian and Asian plates, intracontinental subduction occurred along the Main Central Thrust (MCT) zone in the High Himalaya. In the Kishtwar–Zanskar Himalaya, the MCT is a 2 km thick shear zone of high strain, distributed ductile deformation which emplaces the amphibolite facies High Himalayan Crystalline (HHC) unit south‐westwards over the lower greenschist facies Lesser Himalaya. An inverted metamorphic field gradient, mapped from the first appearance of garnet, staurolite and kyanite index minerals, is coincident with the high strain zone. Petrography and garnet zoning profiles indicate that rocks in the lower MCT zone preserve a prograde assemblage, whereas rocks in the HHC unit show retrograde equilibration. Thermobarometric results derived using THERMOCALC indicate a P–T increase of c. 180 °C and c. 400 MPa across the base of the MCT zone, which is a consequence of the syn‐ to postmetamorphic juxtaposition of M1 kyanite grade rocks of the HHC unit on a cooling path over biotite grade footwall rocks, which subsequently attain their peak (M2) during thrusting. Inclusion thermobarometry from the lower MCT zone reveals that M2 was accompanied by loading, and peak conditions of 537±38 °C and 860±120 MPa were attained. M1 kyanite assemblages in the HHC unit, which have not been overprinted by M2 fibrolitic sillimanite, were not significantly affected by M2, and conditions of equilibration are estimated as 742±53 °C and 960±180 MPa. There is no evidence for dissipative or downward conductive heating in the MCT zone. Instead, the primary control on the distribution of peak assemblages, represented by the index minerals, is postmetamorphic ductile thrusting in a downward propagating shear zone. Polymetamorphism and diachroneity of equilibration are also important controls on the thermal profile through the MCT zone and HHC unit.     

Neoproterozoic collisional metamorphism in overthrust terranes of the Trans-Angarian Yenisey Ridge,Siberia

Four polymetamorphic complexes in the vicinity of regional faults in the Trans-Angarian region of the Yenisey Ridge were studied to determine their metamorphic evolution and to elucidate distinctive features of the regional geodynamic processes. Based on our geological and petrological studies using geothermobarometry and P–T path calculations, we show that a Neoproterozoic medium-pressure metamorphism of the kyanite-sillimanite type at c. 850 Ma overprinted regionally metamorphosed low-pressure andalusite-bearing rocks. A positive correlation between rock ages and P–T estimates for the kyanite-sillimanite metamorphism provides evidence for regional structural and tectonic heterogeneity. The medium-pressure recrystallization was characterized by (1) localized distribution of metamorphic zones in the area directly underlying thrust faults with a measured thickness of 2.5–8 km; (2) syntectonic formation of kyanite-bearing mineral assemblages related to thrusting; (3) gradual increase in metamorphic pressure towards the thrust faults associated with a low metamorphic field gradient (from 1–7 to 12°C/km); and (4) equally steep burial P–T paths recorded for the highest grade rocks. These specific features are typical of collisional metamorphism during overthrusting of continental blocks and are evidence of near-isothermal loading in accordance with the transient emplacement of thrust sheets. The proposed model for tectono-metamorphic evolution of the study areas due to crustal thickening at high thrusting rates and subsequent rapid exhumation explains these tectonic features. Data analysis allowed us to consider the medium-pressure kyanite-bearing metapelites as a product of collisional metamorphism, reflecting unidirectional thrusting of Siberian cratonal blocks onto Yenisey Ridge along regional deep faults (Angara, Mayakon, and Chapa areas) and by opposite movements in the zone of secondary splay faults (Garevka area).     

HP/LT metamorphism in the Volparone Breccia (Northern Corsica, France): evidence for involvement of the Europe/Corsica continental margin in the Alpine subdution zone

The Alpine belt in Corsica (France) is characterized by the occurrence of stacked tectonic slices derived from the Corsica/Europe continental margin, which outcrop between two weakly or non‐metamorphic tectonic domains: the ‘autochthonous’ domain of the Hercynian basement to the west and the Balagne Nappe (ophiolitic unit belonging to the ‘Nappes supérieures’) to the east. These slices, including basement rocks (Permian granitoids and their Palaeozoic host rocks), Late Carboniferous–Permian volcano‐sedimentary deposits, coarse‐grained polymict breccias (Volparone Breccia) and Middle Eocene siliciclastic turbidite deposits, were affected by a polyphase deformation history of Alpine age, associated with a well‐developed metamorphic recrystallization. This study provides new quantitative data about the peak of metamorphism and the retrograde P–T path in the Alpine Corsica: the tectonic slices of Volparone Breccia from the Balagne region (previously regarded as unmetamorphosed) were affected by peak metamorphism characterized by the phengite + chlorite + quartz ± albite assemblage. Using the chlorite‐phengite local equilibria method, peak metamorphic P–T conditions coherent with the low‐grade blueschist facies are estimated as 0.60 ± 0.15 GPa and 325 ± 20 °C. Moreover, the retrograde P–T path, characterized by a decrease of pressure and temperature, is evidence of the first stage of the exhumation path from the peak metamorphic conditions to greenschist facies conditions (0.35 ± 0.06 GPa and 315 ± 20 °C). The occurrence of metamorphic peak at high‐pressure/low‐temperature (HP/LT) conditions is evidence of the fact that these tectonic slices, derived from the Corsica/Europe continental margin, were deformed and metamorphosed in the Alpine subduction zone during their underplating at ～20 km of depth into the accretionary wedge and were subsequently juxtaposed against the metamorphic and non‐metamorphic oceanic units during a complex exhumation history.     

Regional metamorphism and tectonic evolution of the Inner Mongolian suture zone

Abstract Regional metamorphism in central Inner Mongolia has occurred during four different periods: the middle Proterozoic, the early Palaeozoic, the middle Palaeozoic and the late Palaeozoic tectonic cycles. The middle Proterozoic and late Palaeozoic metamorphic events are associated with rifting and are characterized by low-pressure facies series. The early Palaeozoic metamorphism occurred in two stages: (1) subduction zone metamorphism resulted in paired metamorphic belts in the Ondor Sum ophiolite and Bainaimiao island arc complex; and (2) orogenic metamorphism occurred during the collision of an island arc with the continent. Two types of middle Palaeozoic metamorphism are represented: (1) subduction zone metamorphism, which affected the melange; and (2) orogenic metamorphism that resulted from continent–continent collision.     

Geochronological and petrological constraints on Palaeoproterozoic granulite facies metamorphism in southeastern margin of the North China Craton

In the southeastern margin of the North China Craton, high-pressure (HP) granulite facies meta-basic rocks exposed as bands or lenses in the Precambrian metamorphic basement (e.g. Bengbu) and as xenoliths in Mesozoic intrusions (e.g. Jiagou) are characterized by the assemblage garnet + clinopyroxene + plagioclase + quartz + rutile ± Ti-rich hornblende. Cathodoluminescence imaging and mineral inclusions reveal that most zircon from the three dated samples displays distinct core-mantle-rim structures. The cores show typical igneous zircon characteristics and give ages of 2.5–2.4 Ga, thus dating the protolith of the metabasites. The mantles formed at granulite facies conditions as evidenced by inclusions of the HP granulite mineral assemblage garnet + clinopyroxene + rutile + plagioclase + quartz ± hornblende and Ti-rich biotite and yield ages of 1839 ± 31, 1811 ± 19 and 1800 ± 15 Ma. An inclusion-free rim yields an age of 176 ± 2 Ma with the lower Th/U ratio of 0.02. The geochronological and preliminary petrological data of this study suggest that the lower crust beneath the southeastern margin of the North China Craton formed at 2.5–2.4 Ga and underwent HP granulite facies metamorphism at c. 1.8 Ga. This HT-HP metamorphic event may be ascribed to large-scale crustal heating and thickening related to mantle-derived magma underplating at the base of the lower crust, as evidenced by widespread extension, rifting and related mafic magma emplacement in the North China Craton during this period. The age of 176 ± 2 Ma most likely records the late amphibolite facies retrogression occurring during exhumation.     

High-pressure micro-inclusions and development of an inverted metamorphic gradient in the Santiago Schists (Ordenes Complex, NW Iberian Massif, Spain): evidence of subduction and syncollisional decompression

Abstract The Santiago Schists are located in the Basal Unit of the Ordenes Complex, one of the allochthonous complexes outcropping in the inner part of the Hercynian Belt in the north-west of the Iberian Peninsula. Their tectonothermal evolution is characterized by the development of an eo-Hercynian metamorphic episode (c. 374 Ma) of high-P, low- to intermediate-T. The mineral assemblage of the high-P episode is preserved as a very thin Si= S1 foliation included in albite porphyroblasts, being composed of: albite + garnet-I + white mica-1 + chlorite-1 + epidote + quartz + rutile ± ilmenite. The equilibrium conditions for this mineral assemblage have been estimated by means of different thermobarometers at 495 ± 10 °C and 14.7 ± 0.7 kbar (probably minimum pressure). The later evolution (syn-D2) of the schists defines a decompressive and slightly prograde P-T path which reached its thermal peak at c. 525 ± 10 °C and 7 kbar. Decompression of the unit occurred contemporaneously with an inversion of the metamorphic gradient, so that the zones of garnet-II, biotite (with an upper subzone with chloritoid) and staurolite developed from bottom to top of the formation. The estimated P-T path for the Santiago Schists suggests that the Basal Unit, probably a fragment of the Gondwana continental margin, was uplifted immediately after its subduction at the beginning of the Hercynian Orogeny. It also suggests that the greater part of the unroofing history of the unit took place in a context of ductile extension, probably related to the continued subduction of the Gondwana continental margin and the contemporaneous development of compensatory extension above it. The inverted metamorphic gradient seems related to conductive heat transferred from a zone of the mantle wedge above the subducted continental margin, when it came into contact with the upper parts of the schists along a detachment, probably of extensional character. The general metamorphic evolution of the Santiago Schists, with the development of high-P assemblages with garnet prior to decompressive and prograde parageneses with biotite, is unusual in the context of the European Hercynian Belt, and shows a close similarity to the tectonothermal evolution of several high-P, low- to intermediate-T circum-Pacific belts.     

Neotectonic evolution of the Brazilian northeastern continental margin based on sedimentary facies and ichnology

Quaternary post-Barreiras sediments are widespread along Brazil's passive margin. These deposits are well exposed in the onshore Paraíba Basin, which is one of the rift basins formed during the Pangean continental breakup. In this area, the post-Barreiras sediments consist of sandstones with abundant soft-sediment deformation structures related to seismicity contemporaneous with deposition. The trace fossils Thalassinoides and Psilonichnus are found up to 38 m above modern sea level in sandstones dated between 60.0 (± 1.4) and 15.1 (± 1.8) ka. The integration of ichnological and sedimentary facies suggests nearshore paleoenvironments. Such deposits could not be related to eustatic sea-level rise, as this time coincides with the last glaciation. Hence, an uplift of 0.63 mm/yr, or 1.97 mm/yr if sea level was 80 m lower in the last glaciation, would have been required to ascend the post-Barreiras sediments several meters above the present-day sea level during the last 60 ka. This would suggest that the post-rift stage of the South American eastern passive margin may have experienced tectonic reactivation more intense than generally recognized. Although more complete data are still needed, the information presented herein may play an important role in studies aiming to decipher the Quaternary evolution of this passive margin.     

活动大陆边缘岩浆作用及构造演化——以敦煌地块为例

大陆边缘弧是汇聚板块边界与俯冲有关的岩浆作用产物, 通常记录了造山带弧岩浆作用、造山过程和大陆地壳形成与演化等诸多重要的地质过程。作为中亚造山带中段最南部的构造单元, 敦煌地块为传统定义上具有早前寒武纪变质结晶基底的微陆块, 其后在古生代时期经历了多期次、多阶段的与中亚造山带造山相关的构造热事件并使其发生再活化, 进而产生了一系列广泛的弧岩浆-变质作用事件。然而, 对于该陆块古生代弧岩浆作用机制和地壳构造演化历史缺乏系统的研究。本文综合近十多年来对敦煌地块的诸多最新研究进展, 系统梳理了古生代岩浆岩岩石组合类型、年代格架、地球化学组成以及同时期变质-沉积构造热事件演化特征, 得到以下认识: (1)敦煌地块古生代岩浆作用过程呈现阶段性特征, 即幕式岩浆作用, 构造位置上从东北部逐渐迁移到南部再折返到中部, 大致可划分为五期: ~510Ma、440~410Ma、390~360Ma、~330Ma和280~245Ma, 而变质作用事件主要集中在450~360Ma; (2)古生代岩浆岩类型主要以钙碱性Ⅰ型花岗岩、埃达克质岩石、少量S型花岗岩和高钾花岗岩为主, 且岩石成分从寒武纪低钾拉斑系列逐渐转变为二叠纪高钾、富硅特征; (3)同位素地球化学特征表明, 敦煌地块中-北部寒武纪-泥盆纪发育的与俯冲相关的弧岩浆对新生地壳的生长起了重要贡献, 并伴随古老地壳再造事件; 而南部泥盆纪-石炭纪岩浆作用则以古老地壳物质重熔为主; (4)基于埃达克质岩石的证据, 敦煌地块在古生代时期经历了两次显著的地壳增厚事件, 早期可能是与北山南部石板山地体/弧碰撞以及幔源岩浆底侵有关, 而晚期可能是与俯冲板片后撤或回卷相关, 地壳厚度可达~55km; (5)敦煌地块属于中亚造山带中段最南部一个具有前寒武纪基底的古老微陆块, 后期卷入了古亚洲洋南向俯冲相关的造山事件使其被强烈破坏与改造。该微陆块作为古亚洲洋南部的活动大陆边缘弧, 被与俯冲作用有关的阶段性弧岩浆底侵、部分熔融、增厚地壳和区域性变质作用等机制改造与活化, 产生了阶段性侵位的陆缘弧岩浆作用。这些认识为探究中亚造山带微陆块的起源和造山带的构造演化提供新的约束。

     

冈底斯岩浆弧东端石榴斜长角闪岩的晚白垩世岩浆与变质作用记录及构造意义

冈底斯岩浆弧位于青藏高原拉萨地体南部,形成在新特提斯洋向北俯冲的安第斯型造山和印度与欧亚大陆碰撞的喜马拉雅型造山过程中,是研究青藏高原中-新生代构造演化的理想地区。本文对冈底斯岩浆弧东端石榴斜长角闪岩进行了岩石学、相平衡模拟以及锆石U-Pb年代学研究。石榴斜长角闪岩主要由石榴石、角闪石、斜长石、绿帘石、白云母和石英组成,含少量金红石和钛铁矿,具有基性岩浆岩的化学成分。相平衡模拟结果表明,石榴斜长角闪岩经历了高压麻粒岩相变质作用和部分熔融,峰期变质作用的温度和压力条件为～820℃和～1.67GPa,形成深度相当于55km。石榴斜长角闪岩中的锆石具有继承的岩浆核和变质边。锆石岩浆核具有条带状环带,相对高的HREE含量(平均值为1150×10~(-6))和高的Th/U比值(0.51～0.95),给出了90.4±1.7Ma(MSWD=0.32)的原岩结晶年龄。锆石的变质边不具环带,具有较低的HREE含量(平均值为58.5×10~(-6))和低的Th/U比值(0.29～0.40),给出了86.7±5.7Ma(MSWD=0.15)的变质年龄。本文研究结果表明,冈底斯岩浆弧东端晚白垩世辉长岩经历了近侵入同期的高压高温变质作用和部分熔融,大体积幔源岩浆的底垫和增生导致岩浆弧发生了显著的新生地壳生长和加厚。     

Reworking of the Gangdese magmatic arc,southeastern Tibet: post‐collisional metamorphism and anatexis

The Gangdese magmatic arc, southeastern Tibet, was built by mantle‐derived magma accretion and juvenile crustal growth during the Mesozoic to Early Cenozoic northward subduction of the Neo‐Tethyan oceanic slab beneath the Eurasian continent. The petrological and geochronological data reveal that the lower crust of the southeastern Gangdese arc experienced Oligocene reworking by metamorphism, anatexis and magmatism after the India and Asia collision. The post‐collisional metamorphic and migmatitic rocks formed at 34–26 Ma and 28–26 Ma respectively. Meta‐granitoids have protolith ages of 65–38 Ma. Inherited detrital zircon from metasedimentary rocks has highly variable ages ranging from 2708 to 37 Ma. These rocks underwent post‐collisional amphibolite facies metamorphism and coeval anatexis under P–T conditions of ~710–760 °C and ~12 kbar with geothermal gradients of 18–20 °C km ^{? 1}, indicating a distinct crustal thickening process. Crustal shortening, thickening and possible subduction erosion due to the continental collision and ongoing convergence resulted in high‐P metamorphic and anatectic reworking of the magmatic and sedimentary rocks of the deep Gangdese arc. This study provides a typical example of the reworking of juvenile and ancient continental crust during active collisional orogeny.     

Coupled role of deformation and metamorphism in the construction of inverted metamorphic sequences: an example from far‐northwest Nepal

In the Greater Himalayan sequence of far northwestern Nepal, detailed mapping, thermobarometry, and microstructure analysis are used to test competing models of the construction of Himalayan inverted metamorphism. The inverted Greater Himalayan sequence, which is characterized by an increase in peak metamorphic temperatures up structural section from 580 to 720 °C, is divided into two tectonometamorphic domains. The lower domain contains garnet‐ to kyanite‐zone rocks whose peak metamorphic assemblages suggest a metamorphic field pressure gradient that increases up structural section from 8 to 11 kbar, and which developed during top‐to‐the‐south directed shearing. The upper portion of the Greater Himalayan sequence is composed of kyanite‐ and sillimanite‐zone migmatitic gneisses that contain a metamorphic pressure gradient that decreases up structural section from 10 to 5 kbar. The lower and upper portions of the Greater Himalayan sequence are separated by a metamorphic discontinuity that spatially coincides with the base of the lowest migmatite unit. Temperatures inferred from quartz recrystallization mechanisms and the opening angles of quartz c‐axis fabrics increase up section through the Greater Himalayan sequence from ～530 to >700 °C and yield similar results to peak metamorphic temperatures determined by thermometry. The observations from the Greater Himalayan sequence in far northwestern Nepal are consistent with numerical predictions of channel‐flow tectonic models, whereby the upper hinterland part evolved as a ductile southward tunnelling mid‐crustal channel and the lower foreland part ductily accreted in a critical‐taper system at the leading edge of the extruding channel. The boundary between the upper and lower portions of the Greater Himalayan sequence is shown to represent a foreland–hinterland transition zone that is used to reconcile the different proposed tectonic styles documented in western Nepal.     

喜马拉雅造山带东段错那洞片麻岩穹窿的变质作用及构造意义

错那洞穹窿是喜马拉雅造山带北部发育的一系列片麻岩穹窿之一,因其赋存有超大型稀有金属矿床而倍受关注。本文对错那洞穹窿核部产出的石榴石十字石蓝晶石白云母片岩进行了岩石学、相平衡模拟和锆石U-Pb年代学研究,为揭示穹窿的成因和成矿作用提供了重要限定。岩石学研究表明,石榴石蓝晶石十字石白云母片岩的共生矿物组合是石榴石+蓝晶石+十字石+白云母+斜长石+石英+钛铁矿+金红石,为典型的中压角闪岩相变质岩。相平衡模拟表明岩石的变质温压条件为670℃和9. 0kbar,并未经历部分熔融。锆石U-Pb定年结果表明,片岩的变质作用发生在47～29Ma,即经历了一个较长期(～20Myr)的变质演化过程。结合现有研究成果,我们认为错那洞片麻岩穹窿具有与喜马拉雅造山带北部发育的其它片麻岩穹窿相同的成因,穹窿核部的中级变质岩为高喜马拉雅结晶岩系的上部构造层位,其变质作用发生在印度大陆向拉萨地体之下低角度俯冲过程中;穹窿核部淡色花岗岩是高分异的异地花岗岩,是高喜马拉雅结晶岩系下部高温高压麻粒岩部分熔融所形成的熔体经历高程度分离结晶产物。此外,本文研究成果为印度与亚洲大陆的碰撞时间和性质提供了进一步约束。