A high sampling-density polarization study of the Southern Coalsack

We present a densely sampled map of visual polarimetry of stars in the direction of the Southern Coalsack dark cloud. Our sample consists of new polarimetric observations of 225 stars drawn from the spectrophotometric survey of Seidensticker, and an additional 173 stars, covering the surrounding areas of the cloud, taken from the literature. Because all the target stars have at least spectroscopic parallaxes, we can reliably investigate the spatial origins of the polarization, in three dimensions. We decompose the polarization into three components, due to (i) the wall of the local hot bubble, (ii) the Coalsack cloud and (iii) material in the Carina spiral arm. The polarization due to the Coalsack varies, both in alignment efficiency  ( p / A_V )  and in the dispersion in polarization angle, across the cloud. Using a simplified radiative transfer treatment we show that the measured polarization in background gas is significantly affected by foreground polarization, and specifically that the analysis of the Coalsack polarization must take the effects of the local hot bubble wall into consideration. Correcting for this effect as well as for the internal line-of-sight averaging in the Coalsack, we find, based on a Chandrasekhar–Fermi analysis, a plane-of-the-sky magnetic field for the Coalsack cloud of  〈 B _⊥〉= 93 ± 23 μG  . A systematic error, best described by a multiplicative factor between 0.5 and 1.5, additionally arises from radiative transfer effect uncertainties. We propose that this high value for the magnetic field in the cloud envelope is due to the fact that the Coalsack cloud is embedded in the hot interior of the Upper Centaurus–Lupus superbubble.     

SCUBA polarization observations of the magnetic fields in the pre-stellar cores L1498 and L1517B

We have mapped linearly polarized dust emission from the pre-stellar cores L1498 and L1517B with the James Clerk Maxwell Telescope (JCMT) using the Submillimetre Common User Bolometer Array (SCUBA) and its polarimeter (SCUBAPOL) at a wavelength of 850 μm. We use these measurements to determine the plane-of-sky magnetic field orientation in the cores. In L1498, we see a magnetic field across the peak of the core that lies at an offset of ∼19°± 12° to the short axis of the core. This is similar to the offsets seen in previous observations of pre-stellar cores. To the south-east of the peak, in the filamentary tail of the core, we see that the magnetic field has rotated to lie almost parallel to the long axis of the filament. We hypothesize that the field in the core may have decoupled from the field in the filament that connects the core to the rest of the cloud. We use the Chandrasekhar–Fermi (CF) method to measure the plane-of-sky field strength in the core of L1498 to be ∼10 ± 7 μG.
In L1517B, we see a more gradual turn in the field direction from the northern part of the core to the south. This appears to follow a twist in the filament in which the core is buried, with the field staying at a roughly constant ∼25°± 6° offset to the short axis of the filament, consistent with previous observations of pre-stellar cores. Hence these two clouds in an apparently similar evolutionary state, that exhibit similar masses, morphologies and densities, have very different magnetic field configurations. We again use the CF method and calculate the magnetic field strength in L1517B to be ∼30 ± 10 μG. Both cores appear to be roughly virialized. Comparison with our previous work on somewhat denser cores shows that, for the denser cores, thermal and non-thermal (including magnetic) support are approximately equal, while for the lower density cores studied here, thermal support dominates.     

Implications of Non-cylindrical Flux Ropes for Magnetic Cloud Reconstruction Techniques and the Interpretation of Double Flux Rope Events

Magnetic clouds (MCs) are a subset of interplanetary coronal mass ejections (ICMEs) which exhibit signatures consistent with a magnetic flux rope structure. Techniques for reconstructing flux rope orientation from single-point in situ observations typically assume the flux rope is locally cylindrical, e.g., minimum variance analysis (MVA) and force-free flux rope (FFFR) fitting. In this study, we outline a non-cylindrical magnetic flux rope model, in which the flux rope radius and axial curvature can both vary along the length of the axis. This model is not necessarily intended to represent the global structure of MCs, but it can be used to quantify the error in MC reconstruction resulting from the cylindrical approximation. When the local flux rope axis is approximately perpendicular to the heliocentric radial direction, which is also the effective spacecraft trajectory through a magnetic cloud, the error in using cylindrical reconstruction methods is relatively small (≈ 10^∘). However, as the local axis orientation becomes increasingly aligned with the radial direction, the spacecraft trajectory may pass close to the axis at two separate locations. This results in a magnetic field time series which deviates significantly from encounters with a force-free flux rope, and consequently the error in the axis orientation derived from cylindrical reconstructions can be as much as 90^∘. Such two-axis encounters can result in an apparent ‘double flux rope’ signature in the magnetic field time series, sometimes observed in spacecraft data. Analysing each axis encounter independently produces reasonably accurate axis orientations with MVA, but larger errors with FFFR fitting.     

Starlight polarization and CO observations towards the Lupus clouds

We performed an observational study of the dark filaments Lupus 1 and Lupus 4 using both polarimetric observations of 190 stars and a sample of 72 ¹²CO profiles towards these clouds. We have estimated lower limits to the distances of Lupus 1 and Lupus 4 (≳ 140 and ≳ 125 pc, respectively). The observational strategy of the survey allows us to compare the projected magnetic field in an extended area around each cloud with the magnetic field direction observed to prevail along the clouds. Lupus 4 could have collapsed along the magnetic field lines, while in Lupus 1 the magnetic field appears to be less ordered, having the major axis of the filaments parallel to the large-scale projected magnetic field. These differences would imply that both filaments have different pattern evolutions. From the CO observations we have probed the velocity fields of the filaments and the spatial extension of the molecular gas with respect to the dust.     

VLA polarimetry observations of PKS 2322−123: estimating magnetic fields in the Abell 2597 cluster

We present 5-, 8-, and 15-GHz total intensity and polarimetric observations of the radio source PKS 2322−123 taken with the Very Large Array (VLA). This small (11 kpc) source is located at the centre of the cooling-core cluster Abell 2597. The inner X-ray structure, the radio morphology and the steep spectral index  (α=−1.8)  in the lobes all suggest that the radio emission is confined by the ambient X-ray gas. We detect a small region of polarized flux in the southern lobe and are able to calculate a Faraday rotation measure (RM) of 3620 rad m⁻² over this region. Based on these observations and Chandra X-ray data, we suggest that the southern lobe has been deflected from its original south-western orientation to the south and into our line of sight. Using the observed rotation measures (RMs) and our calculated electron density profiles, and assuming both a uniform and tangled magnetic field topology, we estimate a lower limit of the line-of-sight cluster magnetic field,   B _∥= 2.1  μG  .     

The spectrum of BAL QSO Q1303+308: intrinsic variability and line-locking stability

A recently taken WHT optical spectrum of the BAL QSO Q1303+308 shows interesting changes in the spectral characteristics of the absorption systems. In particular, the equivalent widths of many of the broad absorption lines have markedly increased with respect to observations taken 15 yr earlier by Foltz et al., with the more blueshifted components showing the greatest increase by a factor of ≈5 in optical depth. Perhaps the most remarkable feature of the data is that, in the rest frame of the quasar, the line-of-sight outflow velocity of the clouds has only increased by ≈55 km s⁻¹ in a rest-frame time interval of 5–6 yr. Various examples of doublet line locking are still visible in the system, and we present a provisional model analysis of the spectrum showing that theories based on small cloud velocity interactions via line locking can successfully explain the general appearance of the spectrum and its variability. Finally we highlight the need for further ongoing monitoring of this fascinating object.     

Constraining the geometry of the neutron star RX J1856.5−3754

RX J1856.5−3754 is one of the brightest, nearby isolated neutron stars (NSs), and considerable observational resources have been devoted to its study. In previous work, we found that our latest models of a magnetic, hydrogen atmosphere match well the entire spectrum, from X-rays to optical (with best-fitting NS radius   R ≈ 14  km, gravitational redshift   z _g∼ 0.2  , and magnetic field   B ≈ 4 × 10¹²  G). A remaining puzzle is the non-detection of rotational modulation of the X-ray emission, despite extensive searches. The situation changed recently with XMM–Newton observations that uncovered 7-s pulsations at the     level. By comparing the predictions of our model (which includes simple dipolar-like surface distributions of magnetic field and temperature) with the observed brightness variations, we are able to constrain the geometry of RX J1856.5−3754, with one angle <6° and the other angle     , though the solutions are not definitive, given the observational and model uncertainties. These angles indicate a close alignment between the rotation and the magnetic axes or between the rotation axis and the observer. We discuss our results in the context of RX J1856.5−3754 being a normal radio pulsar and a candidate for observation by future X-ray polarization missions such as Constellation-X or XEUS .     

Aspect angle for interstellar magnetic field in SN 1006

A number of important processes taking place around strong shocks in supernova remnants (SNRs) depend on the shock obliquity. The measured synchrotron flux is a function of the aspect angle between interstellar magnetic field (ISMF) and the line of sight. Thus, a model of non-thermal emission from SNRs should account for the orientation of the ambient magnetic field. We develop a new method for the estimation of the aspect angle, based on the comparison between observed and synthesized radio maps of SNRs, making different assumptions about the dependence of electron injection efficiency on the shock obliquity. The method uses the azimuthal profile of radio surface brightness as a probe for orientation of ambient magnetic field because it is almost insensitive to the downstream distribution of magnetic field and emitting electrons. We apply our method to a new radio image of SN 1006 produced on the basis of archival Very Large Array and Parkes data. The image recovers emission from all spatial structures with angular scales from a few arcsec to 15 arcmin. We explore different models of injection efficiency and find the following best-fitting values for the aspect angle of SN 1006:  φ_o= 70^o± 4.2^o  if the injection is isotropic,  φ_o= 64^o± 2.8^o  for quasi-perpendicular injection (SNR has an equatorial belt in both cases) and  φ_o= 11^o± 0.8^o  for quasi-parallel injection (polar-cap model of SNR). In the last case, SN 1006 is expected to have a centrally peaked morphology contrary to what is observed. Therefore, our analysis provides some indication against the quasi-parallel injection model.     

Simulations of the formation of stellar discs in the Galactic Centre via cloud–cloud collisions

Young massive stars in the central parsec of our Galaxy are best explained by star formation within at least one, and possibly two, massive self-gravitating gaseous discs. With help of numerical simulations, we here consider whether the observed population of young stars could have originated from a large angle collision of two massive gaseous clouds at   R ≃ 1 pc  from Sgr A*. In all the simulations performed, the post-collision gas flow forms an inner, nearly circular gaseous disc and one or two eccentric outer filaments, consistent with the observations. Furthermore, the radial stellar mass distribution is always very steep,  Σ_*∝ R ⁻²  , again consistent with the observations. All of our simulations produce discs that are warped by between 30° and 60°, in accordance with the most recent observations. The three-dimensional velocity structure of the stellar distribution is sensitive to initial conditions (e.g. the impact parameter of the clouds) and gas cooling details. For example, the runs in which the inner disc is fed intermittently with material possessing fluctuating angular momentum result in multiple stellar discs with different orbital orientations, contradicting the observed data. In all the cases the amount of gas accreted by our inner boundary condition is large, enough to allow Sgr A* to radiate near its Eddington limit over ∼10⁵ yr. This suggests that a refined model would have physically larger clouds (or a cloud and a disc such as the circumnuclear disc) colliding at a distance of a few parsecs rather than 1 pc as in our simulations.     

An ultra-high-resolution study of the interstellar medium towards Orion

We report ultra-high-resolution observations     of Na  i , Ca  ii , K  i , CH and CH⁺ for interstellar sightlines towards 12 bright stars in Orion. These data enable the detection of many more absorption components than previously recognized, providing a more accurate perspective on the absorbing medium. This is especially so for the line of sight to the Orion nebula, a region not previously studied at very high resolution. Model fits have been constructed for the absorption-line profiles, providing estimates for the column density, velocity dispersion and central velocity for each constituent velocity component. A comparison between the absorption occurring in sightlines with small angular separations has been used, along with comparisons with other studies, to estimate the line-of-sight velocity structures. Comparisons with earlier studies have also revealed temporal variability in the absorption-line profile of ζ Ori, highlighting the presence of small-scale spatial structure in the interstellar medium on scales of ≈10 au. Where absorption from both Na⁰ and K⁰ is observed for a particular cloud, a comparison of the velocity dispersions measured for each of these species provides rigorous limits on both the kinetic temperature and turbulent velocity prevailing in each cloud. Our results indicate the turbulent motions to be subsonic in each case.     abundance ratios are derived for individual clouds, providing an indication of their physical state.     

Progressive Transformation of a Flux Rope to an ICME

The solar wind conditions at one astronomical unit (AU) can be strongly disturbed by interplanetary coronal mass ejections (ICMEs). A subset, called magnetic clouds (MCs), is formed by twisted flux ropes that transport an important amount of magnetic flux and helicity, which is released in CMEs. At 1 AU from the Sun, the magnetic structure of MCs is generally modeled by neglecting their expansion during the spacecraft crossing. However, in some cases, MCs present a significant expansion. We present here an analysis of the huge and significantly expanding MC observed by the Wind spacecraft during 9 – 10 November 2004. This MC was embedded in an ICME. After determining an approximate orientation for the flux rope using the minimum variance method, we obtain a precise orientation of the cloud axis by relating its front and rear magnetic discontinuities using a direct method. This method takes into account the conservation of the azimuthal magnetic flux between the inbound and outbound branches and is valid for a finite impact parameter (i.e., not necessarily a small distance between the spacecraft trajectory and the cloud axis). The MC is also studied using dynamic models with isotropic expansion. We have found (6.2±1.5)×10²⁰ Mx for the axial flux and (78±18)×10²⁰ Mx for the azimuthal flux. Moreover, using the direct method, we find that the ICME is formed by a flux rope (MC) followed by an extended coherent magnetic region. These observations are interpreted by considering the existence of a previously larger flux rope, which partially reconnected with its environment in the front. We estimate that the reconnection process started close to the Sun. These findings imply that the ejected flux rope is progressively peeled by reconnection and transformed to the observed ICME (with a remnant flux rope in the front part).     

The energy loss of a rotating magnetized neutron star

The analysis of observations of pulsar B1931+24 shows that the mechanism of the spin-down of a rotating magnetized neutron star is due to the plasma generation in its magnetosphere and, consequently, the radio emission generation. The unique observation of the switch on and switch off of this pulsar allows us to distinguish between the energy loss in the absence of radio emission (the magnetodipole radiation) and the current loss due to the rotation energy expenditure to the relativistic plasma generation and acceleration in the pulsar magnetosphere. The inclination angle χ, the angle between the rotation axis and the magnetic dipole axis, can be stationary for this pulsar,  χ=χ_st  . From observations and theory it follows that  χ_st= 59°  .     

Formation of astrophysical jets by a contracting magnetic accretion disk

In the present paper, we discuss an MHD model for the formation of astrophysical jets, in which the directed flows are ejected along the rotation axis of an accretion disk formed from a cloud having a large scale magnetic field parallel to the angular momentum axis of the disk. The acceleration of jets is due to thej×B force in the relaxing magnetic twist which is produced by the rotation of the disk. The characteristic features of the jets, predicted by our mechanism and hopefully to be proven by observations, are the helical velocity and the hollow cylindrical shape of the jet, with a diameter of roughly the size of the region from which the acceretion disk collected its mass. Justification for the assumption of the perpendicular orientation of the disk, or the parallelism of the jets, to the external magnetic field may be provided by the fact that the component of rotation whose axis is perpendicular to the field may have been damped in the earlier phase of the cloud contraction.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 Septemper–6 October, 1984.     

Parsec-scale polarization of the jet in quasar 4C 71.07

Very long-baseline interferometry (VLBI) observations of the quasar 4C 71.07 (0836+710) at frequencies of 5 and 8.4 GHz at two epochs are used to investigate apparent misalignments between the magnetic field and jet direction found in this source. The observed polarization angles are not consistent with Faraday rotation of synchrotron radiation from an aligned magnetic field. Internal Faraday rotation in a uniform spherical source is also ruled out by the observations, and while the misalignments could result from internal Faraday rotation in a non-uniform source, no strong signatures of this effect were found. The jet shows two distinct kinks at which the ridge-line changes direction and then reverts to its original direction. The magnetic field in these regions is parallel to the jet, and remains so as the jet bends. It seems likely that the largest remaining misalignment is associated with another such kink that is unresolved by these observations. The percentage polarization decreases near the bright knots, consistent with enhancement in brightness by compressions in the plane normal to the jet axis. The inferred rotation measure is low (100 rad m⁻²) throughout the jet, as for other quasars. However near the core, the polarization position angles suggest a rotation measure that appears to be uncharacteristically low by comparison with other quasars.     

Interplanetary magnetic clouds and cosmic ray modulation

We studied the cosmic ray intensity variation due to interplanetary magnetic clouds during an unusual class of low amplitude anisotropic wave train events. The low amplitude anisotropic wave train events in cosmic ray intensity have been identified using the data of ground based Deep River neutron monitor and studied during the period 1981–1994. Even though the occurrence of low amplitude anisotropic wave trains does not depend on the onset of interplanetary magnetic clouds, but the possibility of occurrence of these events cannot be overlooked during the periods of the interplanetary magnetic cloud events. It is observed that the solar wind velocity remains higher (> 300) than normal and the interplanetary magnetic field B remains lower than normal on the onset of the interplanetary magnetic cloud during the passage of low amplitude wave trains. It is also noted that the proton density remains significantly low during high solar wind velocity, which is expected. The north south component of interplanetary magnetic field Bz turns southward to one day before the arrival of cloud and remains in the southward direction after the arrival of a cloud. During these events the cosmic ray intensity is found to increase with increase of solar wind velocity. The superposed epoch analysis of cosmic ray intensity for these events during the onset of interplanetary magnetic clouds reveals that the decrease in cosmic ray intensity starts not at the onset of the cloud but after a few days. The cosmic ray intensity increases on arrival of the magnetic cloud and decreases gradually after the passage of the magnetic cloud.     

Radiative transfer across a magnetic flux tube

In the coming years, some solar telescopes will be able to yield the Stokes' parameters of polarized light with a resolution better than 1 arc sec (0.3 arc sec for THEMIS). We have simulated the Stokes' parameters of a solar magnetic flux tube as seen with such a resolution. We have shown that, observing with a line-of-sight not parallel to the axis of the flux tube (assumed vertical and axisymmetric), it is possible to see differences between different configurations of the magnetic field inside the flux tube (presence, and in what direction, of an azimuthal component of the field). Furthermore, along such a line-of-sight, the polarization profiles of any atomic line are strongly absorbed at the line center. We then suggest a strategy to infer the structure of the magnetic field from observations at high spatial resolution.     

Three-dimensional simulations of molecular cloud fragmentation regulated by magnetic fields and ambipolar diffusion

We employ the first fully three-dimensional simulation to study the role of magnetic fields and ion–neutral friction in regulating gravitationally driven fragmentation of molecular clouds. The cores in an initially subcritical cloud develop gradually over an ambipolar diffusion time while the cores in an initially supercritical cloud develop in a dynamical time. The infalling speeds on to cores are subsonic in the case of an initially subcritical cloud, while an extended (≳0.1 pc) region of supersonic infall exists in the case of an initially supercritical cloud. These results are consistent with previous two-dimensional simulations. We also found that a snapshot of the relation between density (ρ) and the strength of the magnetic field ( B ) at different spatial points of the cloud coincides with the evolutionary track of an individual core. When the density becomes large, both the relations tend to   B ∝ρ^0.5  .     

Magnetic hydrogen atmosphere models and the neutron star RX J1856.5–3754

RX J1856.5−3754 is one of the brightest nearby isolated neutron stars (INSs), and considerable observational resources have been devoted to it. However, current models are unable to satisfactorily explain the data. We show that our latest models of a thin, magnetic, partially ionized hydrogen atmosphere on top of a condensed surface can fit the entire spectrum, from X-rays to optical, of RX J1856.5−3754, within the uncertainties. In our simplest model, the best-fitting parameters are an interstellar column density   N _H≈ 1 × 10²⁰ cm⁻²  and an emitting area with   R ^∞≈ 17 km  (assuming a distance to RX J1856.5−3754 of 140 pc), temperature   T ^∞≈ 4.3 × 10⁵ K  , gravitational redshift   z _g ∼ 0.22  , atmospheric hydrogen column   y _H≈ 1 g cm⁻²  , and magnetic field   B ≈ (3–4) × 10¹² G  ; the values for the temperature and magnetic field indicate an effective average over the surface. We also calculate a more realistic model, which accounts for magnetic field and temperature variations over the NS surface as well as general relativistic effects, to determine pulsations; we find that there exist viewing geometries that produce pulsations near the currently observed limits. The origin of the thin atmospheres required to fit the data is an important question, and we briefly discuss mechanisms for producing these atmospheres. Our model thus represents the most self-consistent picture to date for explaining all the observations of RX J1856.5−3754.     

Analysis of λ = 6 cm VLBI polarization observations of a complete sample of northern BL Lacertae objects

The results of very long baseline interferometry (VLBI) total intensity ( I ) and linear polarization ( P ) observations at     are presented for 10 radio bright BL Lacertae objects. These images complete first-epoch polarization observations for the 1-Jy sample of northern BL Lacertae objects defined by Kühr & Schmidt. Estimates of superluminal speeds are presented for several sources, bringing the total number of sources in the sample for which such estimates are available to 16. Second-epoch observations currently being reduced should yield speed estimates for VLBI features in essentially all the sources in the sample. The jet magnetic fields of these BL Lacertae objects are usually transverse to the local jet direction, but a sizeable minority (about 30 per cent) have VLBI jet components with longitudinal magnetic fields. This may suggest that the conditions in the VLBI jets of BL Lacertae objects are favourable for the formation of relativistic shocks; alternatively, it may be that the toroidal component of the intrinsic jet magnetic field is characteristically dominant in these sources.     

Comparison of 13CO line and far-infrared continuum emission as a diagnostic of dust and molecular gas physical conditions – I. Motivation and modelling

Determining temperatures in molecular clouds from ratios of CO rotational lines or from ratios of continuum emission in different wavelength bands suffers from reduced temperature sensitivity in the high-temperature limit. In theory, the ratio of far-infrared (FIR), submillimetre or millimetre continuum to that of a ¹³CO (or C¹⁸O) rotational line can place reliable upper limits on the temperature of the dust and molecular gas. Consequently, FIR continuum data from the COBE /Diffuse Infrared Background Experiment (DIRBE) instrument and Nagoya 4-m  ¹³CO  J = 1 → 0  spectral line data were used to plot  240 μm/¹³CO  J = 1 → 0  intensity ratios against 140/240 μm dust colour temperatures, allowing us to constrain the multiparsec-scale physical conditions in the Orion A and B molecular clouds.
The best-fitting models to the Orion clouds consist of two components: a component near the surface of the clouds that is heated primarily by a very large scale (i.e. ∼1 kpc) interstellar radiation field and a component deeper within the clouds. The former has a fixed temperature and the latter has a range of temperatures that vary from one sightline to another. The models require a dust–gas temperature difference of 0 ± 2 K and suggest that 40–50 per cent of the Orion clouds are in the form of dust and gas with temperatures between 3 and 10 K. The implications are discussed in detail in later papers and include stronger dust–gas thermal coupling and higher Galactic-scale molecular gas temperatures than are usually accepted, and an improved explanation for the N (H₂)/ I (CO) conversion factor. It is emphasized that these results are preliminary and require confirmation by independent observations and methods.