Earthquake parameters and spatial distribution of coseismic effects in Southern Siberia and Mongolia

In this work we review earthquakes that happened in Southern Siberia and Mongolia within the coordinates of 42°–62° N and 80°–124° E and first propose relationships between earthquake parameters (a surface-wave earthquake magnitude M _s and an epicentral intensity(I ₀) based on the MSK-64 scale) and maximal distances from an earthquake epicenter (R _{e max}), hypocenter (R _{h max}), and a seismogenic fault (R _{f max}) to the localities of secondary coseismic effects. Special attention was paid to the study of these relationships for the effects of soil liquefaction. Hence, it was shown that secondary deformations from an earthquake were distributed in space away from an earthquake epicenter, than from an associating seismogenic fault. The effects of soil liquefaction are manifested by several times closer to a seismogenic fault, than all other effects, regardless of the type of tectonic movement in a seismic focus. Within the 40 km zone from an earthquake epicenter 44% of the known manifestations of liquefaction process occurred; within the 40 km zone from a seismogenic fault—90%. We propose the next relationship for effects of soil liquefaction: M _s = 0.007 × R _{e max} + 5.168 that increases the limits of the maximum epicentral distance at an earthquake magnitude of 5.2 ≤ M _s ≤ 8.1 as compared to the corresponding relationships for different regions of the world.     

A slow earthquake

Anomalous earthquakes such as creep events, tsunami earthquakes and silent earthquakes have been reported in the recent literature. In this paper we discuss an anomalous “slow earthquake” that occurred on June 6, 1960 in southern Chile. Although the surface-wave magnitude of this event is only 6.9, it excited anomalously large long-period multiple surface waves with a seismic moment of 5.6 · 10²⁷ dyn cm. The Benioff long-period seismogram of this earthquake recorded at Pasadena shows an extremely long, about 1.5–2 h coda of Rayleigh waves, with a period of 10–25 s. The coda length for other events with a comparable magnitude which occurred in the same region is about 10 min. This observation suggests that the long coda length is due to a long source rupture process which lasted at least 1 h. Although at least 15 distinct events can be identified in the coda, no short-period body waves were recorded corresponding to these, except for the first one. These results suggest that a relatively small (M_s ? 6.9) earthquake triggered a series of slow events; the duration of the whole sequence being longer than 1 h. This event probably occurred on a transform fault on the extension of the Chile Rise and provides important information regarding the nature of the transform fault.     

GIS-based soil liquefaction susceptibility map of Mumbai city for earthquake events

The problem of liquefaction of soil during seismic event is one of the important topics in the field of Geotechnical Earthquake Engineering. Liquefaction of soil is generally occurs in loose cohesionless saturated soil when pore water pressure increases suddenly due to induced ground motion and shear strength of soil decreases to zero and leading the structure situated above to undergo a large settlement, or failure. The failures took place due to liquefaction induced soil movement spread over few square km area continuously. Hence this is a problem where spatial variation involves and to represent this spatial variation Geographic Information System (GIS) is very useful in decision making about the area subjected to liquefaction. In this paper, GIS software GRAM++ is used to prepare soil liquefaction susceptibility map for entire Mumbai city in India by marking three zones viz. critically liquefiable soil, moderately liquefiable soil and non liquefiable soil. Extensive field borehole test data for groundwater depth, standard penetration test (SPT) blow counts, dry density, wet density and specific gravity, etc. have been collected from different parts of Mumbai. Simplified procedure of Youd et al. (2001) is used for calculation of factor of safety against soil liquefaction potential. Mumbai city and suburban area are formed by reclaiming lands around seven islands since 1865 till current date and still it is progressing in the area such as Navi Mumbai and beyond Borivali to Mira road suburban area. The factors of safety against soil liquefaction were determined for earthquake moment magnitude ranging from M_w = 5.0 to 7.5. It is found that the areas like Borivali, Malad, Dahisar, Bhandup may prone to liquefaction for earthquake moment magnitude ranging from M_w = 5.0 to 7.5. The liquefaction susceptibility maps were created by using GRAM++ by showing the areas where the factor of safety against the soil liquefaction is less than one. Proposed liquefaction susceptibility map of Mumbai city can be used by researchers for earthquake hazard analysis, for the preventive measures in disaster management, for urban planning and further development of Mumbai city and suburban area.     

Threshold seismic energy and liquefaction distance limit during the 2008 Wenchuan earthquake

Estimating the possible region of liquefaction occurrence during a strong earthquake is highly valuable for economy loss estimation, reconnaissance efforts and site investigations after the event. This study identified and compiled a large amount of liquefaction case histories from the 2008 Wenchuan earthquake, China, to investigate the relationship between the attenuation of seismic wave energy and liquefaction distance limit during this earthquake. Firstly, we introduced the concept of energy absorption ratio, which is defined as the absorbed energy of soil divided by the imparted energy of seismic waves at a given site, and the relationship between the energy absorption ratio and the material damping ratio was established based on shear stress–strain loop of soil element and the seismic wave propagation process from the source to the site. Secondly, the threshold imparted seismic energy of liquefaction was obtained based on existing researches of absorbed energy required to trigger liquefaction of sandy soils and the ground motion attenuation characteristics of the 2008 Wenchuan earthquake, and the liquefaction distance limit of this earthquake was estimated according to the proposed magnitude–energy–distance relationship. Finally, the field liquefaction database of 209 sites of the 2008 Wenchuan earthquake was used to validate such an estimation, and the field observed threshold imparted seismic energy to cause liquefaction in recent major earthquakes worldwide was back-analyzed to check the predictability of the present method, and several possible mechanisms were discussed to explain the discrepancy between the field observations and the theoretical predictions. This study indicates that seismic energy attenuation and liquefaction distance limit are regional specific and earthquake dependent, and 382 J/m³ is the average level of threshold imparted seismic energy to cause liquefaction for loose saturated sandy soils, and the corresponding liquefaction distance limit is approximately 87.4 km in fault distance for a M_w?=?7.9 event in the Chengdu Plain. The proposed regional energy attenuation model and threshold imparted seismic energy may be considered as an approximate tool in evaluating the liquefaction hazard during potential earthquakes in this area.     

Comparison of SPT and <Emphasis Type="Italic">V</Emphasis><Subscript>s</Subscript>-based liquefaction analyses: a case study in Erciş (Van,Turkey)

Liquefaction which is one of the most destructive ground deformations occurs during an earthquake in saturated or partially saturated silty and sandy soils, which may cause serious damages such as settlement and tilting of structures due to shear strength loss of soils. Standard (SPT) and cone (CPT) penetration tests as well as the shear wave velocity (V _s)-based methods are commonly used for the determination of liquefaction potential. In this research, it was aimed to compare the SPT and V _s-based liquefaction analysis methods by generating different earthquake scenarios. Accordingly, the Erci? residential area, which was mostly affected by the 2011 Van earthquake (M _w = 7.1), was chosen as the model site. Erci? (Van, Turkey) and its surroundings settle on an alluvial plain which consists of silty and sandy layers with shallow groundwater level. Moreover, Çald?ran, Erci?–Kocap?nar and Van Fault Zones are the major seismic sources of the region which have a significant potential of producing large magnitude earthquakes. After liquefaction assessments, the liquefaction potential in the western part of the region and in the coastal regions nearby the Lake Van is found to be higher than the other locations. Thus, it can be stated that the soil tightness and groundwater level dominantly control the liquefaction potential. In addition, the lateral spreading and sand boiling spots observed after the 23rd October 2011 Van earthquake overlap the scenario boundaries predicted in this study. Eventually, the use of V _s-based liquefaction analysis in collaboration with the SPT results is quite advantageous to assess the rate of liquefaction in a specific area.     

2009年7月24日西藏尼玛西南MS5.6地震研究

主要研究2009年7月24日西藏尼玛西南MS5.6地震的基本参数、地震序列特征、震源参数、发震构造等;利用震中附近600km范围内台站测定参数研究地震的震源机制解,与哈佛大学给出的震源机制解较一致,且与通过现场考察的发震断层走向具有一致性。研究认为本次地震发生在冈底斯山—拉萨块体内部,断裂为NNW向,主要受张应力作用产生左旋走滑正断层活动。此外还分析了震前地震学条带异常特征,结束表明,震前1年出现NW向条带非常显著,研究结论为该地区今后地震预测提供科学依据。     

2013年8月新疆乌鲁木齐市5.1级地震强震动记录及特征分析

2013年8月30日乌鲁木齐市发生M_S5.1地震,乌鲁木齐烈度速报台网有32个强震动台触发获得了主震加速度记录。选取23条强震动记录进行常规处理,统计强震动记录数量随震中距分布,对比分析此次地震峰值加速度(PGA)与新疆土层加速度衰减关系;并利用强震动数据对此次地震进行定位,定位结果对应台站震中距与到时线性度较好;最后分析了典型强震动台站记录特性与建筑物震害及工程震害相关性。     

3rd Ishihara Lecture: An investigation into why liquefaction charts work: A necessary step toward integrating the states of art and practice

This paper is a systematic effort to clarify why field liquefaction charts based on Seed and Idriss׳ Simplified Procedure work so well. This is a necessary step toward integrating the states of the art (SOA) and practice (SOP) for evaluating liquefaction and its effects. The SOA relies mostly on laboratory measurements and correlations with void ratio and relative density of the sand. The SOP is based on field measurements of penetration resistance and shear wave velocity coupled with empirical or semi-empirical correlations. This gap slows down further progress in both SOP and SOA. The paper accomplishes its objective through: a literature review of relevant aspects of the SOA including factors influencing threshold shear strain and pore pressure buildup during cyclic strain-controlled tests; a discussion of factors influencing field penetration resistance and shear wave velocity; and a discussion of the meaning of the curves in the liquefaction charts separating liquefaction from no liquefaction, helped by recent full-scale and centrifuge results. It is concluded that the charts are curves of constant cyclic strain at the lower end (V_s1<160 m/s), with this strain being about 0.03–0.05% for earthquake magnitude, M_w≈7. It is also concluded, in a more speculative way, that the curves at the upper end probably correspond to a variable increasing cyclic strain and K_o, with this upper end controlled by overconsolidated and preshaken sands, and with cyclic strains needed to cause liquefaction being as high as 0.1–0.3%. These conclusions are validated by application to case histories corresponding to M_w≈7, mostly in the San Francisco Bay Area of California during the 1989 Loma Prieta earthquake.     

Earthquake prediction on the basis of Vp/Vs variations — a case history

On November 7, 1976, an earthquake of the strike-slip fault type, and of magnitude 6.7, occurred at two mountainous localities, Yanyuan and Ninglang, in the border region of the Szechuan and Yunnan Provinces, China. One year before the earthquake, a prediction was made as to the magnitude and location of the impending earthquake by the present authors, on the basis of the results of a general survey of an area of about 20,000 km² for V_p/V_s ratio variations. The prediction of time of occurrence was made afterwards by the combined analysis of results of observations of some other precursory phenomena. The actual occurrence of the event was generally considered as being in agreement with the prediction.The present study may be taken as a new example for the detection of V_p/V_s ratio variations prior to an earthquake of the strike-slip fault type. By considering the difference between the shear rupture and stick-slip motion and the anisotropy induced by dilatancy, a preliminary discussion is made concerning the related results.     

Analysis of the liquefaction phenomena in the village of Vittorito (L��Aquila)

This paper describes a case-history of liquefaction occurred near the village of Vittorito after the April 6, 2009 L’Aquila earthquake (moment magnitude M_w = 6.3), approximately 45 km far from the epicentre. In the document, first, an estimation of the seismic motion in the area has been made. Thereafter, the performed geotechnical investigation is described, followed by the application of some fast assessment criteria for the occurrence of liquefaction, recently proposed by the new Italian Building Code. A careful assessment of all the parameters involved in conventional Seed and Idriss (1971) liquefaction analyses is considered. The cyclic resistance ratio CRR is evaluated by cone penetration tests CPT and by in situ seismic dilatometer tests SMDT; in the latter case CRR is evaluated by different empirical correlations with shear wave velocity V_s and horizontal stress index K_D. Analytical data confirmed the observed occurrence of the liquefaction in Vittorito, even if the acceleration field in the area, produced by the L’Aquila earthquake, was very low.     

Seismic microzoning from synthetic ground motion earthquake scenarios parameters: The case study of the city of Catania (Italy)

The city of Catania (Italy) in the South-Eastern Sicily has been affected in past times by several destroying earthquakes with high values of estimated magnitude. The seismogenic area to the south of Volcano Etna, known as Iblean Area, is placed between the African and the Euro-Asiatic plates on the west of the Ibleo-Maltese escarpment, to the south of the Graben of the Sicilian channel and on the east of the overlapping front of Gela. Basing on the seismic history of Catania, the following earthquake scenarios have been considered: the “Val di Noto” earthquake of January 11, 1693 (with intensity X-XI on MCS scale, magnitude M_W=7.41 and epicentral distance of about 13 km); the “Etna” earthquake of February 20, 1818 (with intensity IX on MCS scale, magnitude M_W=6.23 and epicentral distance of about 10 km). The soil response analysis at the surface, in terms of time history and response spectra, has been obtained by 1-D equivalent linear models for about 1200 borings location available in the data-bank of the central area of Catania of about 50 km², using deterministic design scenario earthquakes as input at the conventional bedrock.Seismic microzoning maps of the city of Catania have been obtained in terms of different peak ground acceleration at the surface and in terms of amplification ratios for given values of frequency.     

2022年1月8日青海门源6.9级地震短临异常跟踪分析

2022年1月8日青海门源县发生6.9级地震,此次地震前青海地区出现了大量地球物理观测异常。2021年10月下旬青海地区出现地磁垂直强度极化高值异常,10月27日异常台站最多,并在门源-祁连至兴海地区形成一个面积约为6.6×10⁴km²的高值异常区;此外,2021年7—11月青海地区8项地下流体观测数据出现准同步异常变化。结合青海及周边地区历史震例的分析结果,认为2021年11月23日至2022年1月23日,青海西北部地磁垂直强度极化高值区内可能发生5.6～6.4级地震。门源6.9级地震发生在地磁垂直强度极化异常出现后的73天,震中位于预测区的边缘,地震的发生时间和地点与预测意见一致,但震级超出预测意见上限值0.5级。此次地震前基于地球物理观测地震预测指标体系开展的短临异常跟踪分析过程,对中国大陆西部地震预报工作具有一定的参考意义。     

A surface seismic approach to liquefaction

The liquefaction potential of soils is traditionally assessed through geotechnical approaches based on the calculation of the cyclical stress ratio (CSR) induced by the expected earthquake and the ‘resistance’ provided by the soil, which is quantified through standard penetration (SPT), cone penetration (CPT), or similar tests. In more recent years, attempts to assess the liquefaction potential have also been made through measurement of shear wave velocity (V_S) in boreholes or from the surface. The latter approach has the advantage of being non-invasive and low cost and of surveying lines rather than single points. However, the resolution of seismic surface techniques is lower than that of borehole techniques and it is still debated whether it is sufficient to assess the liquefaction potential.In this paper we focus our attention on surface seismic techniques (specifically the popular passive and active seismic techniques based on the correlation of surface waves such as ReMi^TM, MASW, ESAC, SSAP, etc.) and explore their performance in assessing the liquefaction susceptibility of soils. The experimental dataset is provided by the two main seismic events of M_L=5.9 and 5.8 (M_W=6.1, M_W=6.0) that struck the Emilia-Romagna region (Northern Italy) on May 20 and 29, 2012, after which extensive liquefaction phenomena were documented in an area of 1200 km².The CPT and drillings available in the area allow us to classify the soils into four classes: A) shallow liquefied sandy soils, B) shallow non-liquefied sandy soils, C) deep non-liquefied sandy soils, and D) clayey–silty soils, and to determine that on average class A soils presented a higher sand content at the depth of 5–8 m compared to class B soils, where sand was dominant in the upper 5 m. Surface wave active–passive surveys were performed at 84 sites, and it was found that they were capable of discriminating among only three soil classes, since class A and B soils showed exactly the same V_S distribution, and it is possible to show both experimentally and theoretically that they appear not to have sufficient resolution to address the seismic liquefaction issue.As a last step, we applied the state-of-the art CSR–V_S method to assess the liquefaction potential of sandy deposits and we found that it failed in the studied area. This might be due to the insufficient resolution of the surface wave methods in assessing the Vs of thin layers and to the fact that Vs scales with the square root of the shear modulus, which implies an intrinsic lower sensitivity of Vs to the shear resistance of the soil compared to parameters traditionally measured with the penetration tests. However, it also emerged that the pure observation of the surface wave dispersion curves at their simplest level (i.e. in the frequency domain, with no inversion) is still potentially informative and can be used to identify the sites where more detailed surveys to assess the liquefaction potential are recommended.     

Evaluation of earthquake activity along the Serghaya fault, Syria, from instrumental seismic data

This is a tentative study in order to characterize and identify the Serghaya fault in Syria through an analysis of its instrumentally observed earthquake activity for the period of 1995–2009. Different approaches are used to evaluate a- and b-values of the Gutenberg-Richter relation. It has been found that the computed b-values (around 1.5) are bigger than usually expected, which could be related either to incompleteness of earthquake catalogue or to invalidity of the Gutenberg-Richter model in the case of Serghaya fault. Based on several explanations of high b-values, existing in the literature, it can be inferred that the events recorded on the Serghaya fault occurred at small depths in the heterogeneous milieus under low stresses. A relative seismic quiescence from 1900 up to now is observed, whereas the biggest earthquake recorded during the study period does not exceed magnitude 3.9. Such quiescence does not reflect accurately an earthquake potential of the Serghaya fault and can probably indicate a large-magnitude earthquake occurrence in near future. The established earthquake catalogue must be necessarily completed in order to deeper characterize the real behavior of the Serghaya fault. Such a characterization, accompanied with seismic activity evaluation, could be used in the assessment of seismic hazard.     

2022年6月1日四川芦山6.1级地震应急产品及震源参数初步分析

北京时间2022年6月1日17时0分四川雅安市芦山县(30.37°N,102.94°E)发生6.1级地震,中国地震台网中心于震后3min发布自动速报结果、震后9min发布正式速报结果,同时联合多家单位启动地震应急产品产出工作,共产出震源参数、历史地震、地震构造、震源机制、余震精定位、推测烈度和震源破裂过程等9类应急产品。结果显示,本次地震发生在龙门山断裂带,位于青藏高原巴颜喀拉地块、岷山构造带、川滇构造带的交汇处;震源机制解表明该地震为一次逆冲型事件;余震精定位结果显示余震展布呈近NE向,与震中区域断裂走向基本一致;烈度速报推测极震区烈度达Ⅸ度,区域面积约2km²,Ⅷ度及以上区域总面积约197km²,涉及四镇一乡。     

Simulation of strong earthquake characteristics of a scenario earthquake (MS7.5) based on the enlightenment of 2022 MS6.9 earthquake in Menyuan

The Menyuan area is an important transportation hub in the Hexi Corridor. The Menyuan M_S6.9 earthquake that occurred on January 8, 2022 had a major impact on the local infrastructure and transportation of this region. Due to the high possibility of similar strong earthquakes occurring in this area in the future, preliminary assessment of the seismic intensity characteristics of destructive earthquakes in this region is essential for effective disaster control. This paper uses the empirical Green′s function (EGF) method as a numerical simulation tool to predict the ground motion intensity of Datong Autonomous County under the action of the scenario earthquake (M_S7.5). Seismic records of aftershocks of the 2016 Menyuan M_S6.4 earthquake were used as Green’s functions for this simulation. The uncertainties associated with various source parameters were considered, and 36 possible earthquake scenarios were simulated to obtain 72 sets of horizontal ground motions in Datong County. The obtained peak ground acceleration (PGA) vs. time histories of the horizontal ground motion were screened using the attenuation relationships provided by the fifth-edition of China's Seismic Ground Motion Parameter Zoning Map and the NGA-West2 dataset. Ultimately, 32 possible acceleration-time histories were selected for further analysis. The screened PGA values ranged from 78.8 to 153 cm/s². The uncertainty associated with the initial rupture point was found to greatly affect the results of the earthquake simulation. The average acceleration spectrum of the selected acceleration-time history exceeded the expected spectrum of a intermediate earthquake, which means that buildings in Datong County might sustain some damage should the scenario earthquake occur. This research can provide reliable ground motion input for urban earthquake damage simulation and seismic design in Datong County. Growing the dataset of small earthquakes recorded in this region will facilitate the large-scale simulation of ground motions under different earthquake scenarios.     

Damage of 1975 Haicheng <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>7.3 earthquake in the Korean Peninsula and its effect on Kyushu,Japan

The 1975 Haicheng M _S7.3 earthquake affected whole Korean Peninsula and even Kyushu, Japan. In this paper isoseismal map of this earthquake was drawn for these areas by sorting out and analyzing data systematically collected, furthermore, the characteristics of the earthquake damage were discussed. In the northern Korean Peninsula, the intensity is V in great majority of this area except local area with intensity VI, and the damage is basically in accordance with typical characteristics of corresponding intensity grade. In the southern Korean Peninsula, the intensity is IV in large part of the area, however, in some big cities such as Seoul etc., not only high buildings shook strongly, but also some people appeared perceptions such as feeling dizzy and so on, and electrical service was interrupted on one or two districts because of transformer tripping. These phenomena could be caused by the effect of long-period wave generated from a large earthquake on far-field.     

含弱渗透性覆盖层饱和砂土地震液化特性研究

针对含弱渗透性覆盖层的饱和砂土地基进行一组离心机振动台试验,并采用OpenSees对试验模型进行数值模拟。通过模型试验与数值模拟结果对比讨论OpenSees对于饱和砂土地基地震液化模拟的精度;采用水平方向的Arias强度表示传入某一位置的地震动强度,并以液化时水平方向Arias强度作为该土层的抗液化强度;采用OpenSees计算不同地震动输入时饱和砂土的反应,以此检验Arias强度作为抗液化强度的准确性。结果表明,引起饱和砂土液化所需要的地震动强度随深度增加而增加;当传入的地震强度达到砂土发生液化所需要的地震强度时,该层砂土将会发生液化。     

The <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> 4.3 January 17, 2014, earthquake: very rare seismic event on the Siberian platform

We described the 2014 January 17 earthquake (M _w?=?4.3) occurred on the Siberian platform in the area of sublongitudinal part of the Angara river in the zone of possible influence of two large reservoirs—Ust-Ilimsk and Boguchan. This is the first event of such magnitude recorded in this previously aseismic area during the whole period of instrumental observations. A seismic moment, a moment magnitude, a hypocentral depth, and a focal mechanism of the event were calculated on the basis of surface wave amplitude spectra. Analysis of the geological and geophysical data showed that the earthquake origin is connected with high-velocity gradient zone located at the border of the Late Proterozoic cover and the Precambrian basement of the Siberian platform. Some evidences for a natural character of the earthquake were considered.     

Seismic microzonation studies for the city of Ragusa (Italy)

The seismic history of the city of Ragusa (Italy), the geotechnical characterisation of the subsoil and the site response analysis should be correctly evaluated for the definition of the Seismic Geotechnical Hazard of the city of Ragusa, through geo-settled seismic microzoning maps. Basing on the seismic history of the city of Ragusa, the following earthquake scenarios have been considered: the “Val di Noto” earthquake of January 11, 1693 (with intensity X–XI on MCS scale, magnitude M_W=7.41 and epicentral distance of about 53 km); the “Etna” earthquake of February 20, 1818 (with intensity IX on MCS scale, magnitude M_W=6.23 and epicentral distance of about 64 km); the Vizzini earthquake of April 13, 1895 (with intensity I=VII–VIII on MCS scale, magnitude M_W=5.86 and epicentral distance of about 26 km); the “Modica” earthquake of January 23, 1980 (with intensity I=V–VI on MCS scale, magnitude M_W=4.58 and epicentral distance of about 10 km); the “Sicilian” earthquake of December 13, 1990 (with intensity I=VII on MCS scale, magnitude M_W=5.64 and epicentral distance of about 50 km). Geotechnical characterisation has been performed by in situ and laboratory tests, with the definition of shear wave velocity profiles in the upper 30 m of soil. Soil response analyses have been evaluated for about 120 borings location by some non-linear 1-D models. Finally the seismic microzonation of the city of Ragusa has been obtained in terms of maps with different peak ground acceleration at the surface; shaking maps for the central area of the city of Ragusa were generated via GIS for the earthquake scenarios.