Testing the Effects of Thematic Uncertainty on Spatial Decision-making

Dasymetric mapping techniques can be employed to estimate population characteristics of small areas that do not correspond to census enumeration areas. Land cover has been the most widely used source of ancillary data in dasymetric mapping. The current research examines the performance of alternative sources of ancillary data, including imperviousness, road networks, and nighttime lights. Nationally available datasets were used in the analysis to allow for replicability. The performance of the techniques used to examine these sources was compared to areal weighting and traditional land cover techniques. Four states were used in the analysis, representing a range of different geographic regions: Connecticut, New Mexico, Oregon, and South Carolina. Ancillary data sources were used to estimate census block group population counts using census tracts as source zones, and the results were compared to the known block group population counts. Results indicate that the performance of dasymetric methods varies substantially among study areas, and no single technique consistently outperforms all others. The three best techniques are imperviousness with values greater than 75 percent removed, imperviousness with values greater than 60 percent removed, and land cover. Total imperviousness and roads perform slightly worse, with nighttime lights performing the worst compared to all other ancillary data types. All techniques performed better than areal weighting.     

Comparisons of two global built area land cover datasets in methods to disaggregate human population in eleven countries from the global South

ABSTRACT

Mapping built land cover at unprecedented detail has been facilitated by increasing availability of global high-resolution imagery and image processing methods. These advances in urban feature extraction and built-area detection can refine the mapping of human population densities, especially in lower income countries where rapid urbanization and changing population is accompanied by frequently out-of-date or inaccurate census data. However, in these contexts it is unclear how best to use built-area data to disaggregate areal, count-based census data. Here we tested two methods using remotely sensed, built-area land cover data to disaggregate population data. These included simple, areal weighting and more complex statistical models with other ancillary information. Outcomes were assessed across eleven countries, representing different world regions varying in population densities, types of built infrastructure, and environmental characteristics. We found that for seven of 11 countries a Random Forest-based, machine learning approach outperforms simple, binary dasymetric disaggregation into remotely-sensed built areas. For these more complex models there was little evidence to support using any single built land cover input over the rest, and in most cases using more than one built-area data product resulted in higher predictive capacity. We discuss these results and implications for future population modeling approaches.     

Dasymetric Mapping Using High Resolution Address Point Datasets

Mismatching sets of boundaries present a persistent problem in spatial analysis for many different applications. Dasymetric mapping techniques can be employed to estimate population characteristics of small areas that do not correspond to census enumeration boundaries. Several types of ancillary data have been used in dasymetric mapping but performance is often limited by their relatively coarse resolution and moderate correspondence to actual population counts. The current research examines the performance of using high resolution ancillary data in the form of individual address point datasets which represent the locations of all addressable units within a jurisdiction. The performance of address points was compared with several other techniques, including areal weighting, land cover, imperviousness, road density and nighttime lights. Datasets from 16 counties in Ohio were used in the analysis, reflecting a range of different population densities. For each technique the ancillary data sources were employed to estimate census block group population counts using census tracts as source zones, and the results were compared with the known block group population counts. Results indicate that address points perform significantly better compared with other types of ancillary data. The overall error for all block groups (n = 683) using address points is 4.9% compared with 10.8% for imperviousness, 11.6% for land cover, 13.3% for road density, 18.6% for nighttime lights and 21.2% for areal weighting. Using only residential address points rather than all types of locations further reduces this error to 4.2%. Analysis of the spatial patterns in the relative performance of the various techniques revealed that address points perform particularly well in low density rural areas, which typically present challenges for traditional dasymetric mapping techniques using land cover datasets. These results provide very strong support for the use of address points for small area population estimates. Current developments in the growing availability of address point datasets and the implications for spatial demographic analyses are discussed.     

Dasymetric Estimation of Population Density and Areal Interpolation of Census Data

This paper describes techniques to compute and map dasymetric population densities and to areally interpolate census data using dasymetrically derived population weights. These techniques are demonstrated with 1980-2000 census data from the 13-county Atlanta metropolitan area. Land-use/land-cover data derived from remotely sensed satellite imagery were used to determine the areal extent of populated areas, which in turn served as the denominator for dasymetric population density computations at the census tract level. The dasymetric method accounts for the spatial distribution of population within administrative areas, yielding more precise population density estimates than the choroplethic method, while graphically representing the geographic distribution of populations. In order to areally interpolate census data from one set of census tract boundaries to another, the percentages of populated areas affected by boundary changes in each affected tract were used as adjustment weights for census data at the census tract level, where census tract boundary shifts made temporal data comparisons difficult. This method of areal interpolation made it possible to represent three years of census data (1980, 1990, and 2000) in one set of common census tracts (1990). Accuracy assessment of the dasymetrically derived adjustment weights indicated a satisfactory level of accuracy. Dasymetrically derived areal interpolation weights can be applied to any type of geographic boundary re-aggregation, such as from census tracts to zip code tabulation areas, from census tracts to local school districts, from zip code areas to telephone exchange prefix areas, and for electoral redistricting.     

Refining Population Surface Models: Experiments with Northern Ireland Census Data

This paper compares and contrasts alternative methods for the construction of discontinuous population surface models based on the census and remotely sensed data from Northern Ireland. Two main methods of population distribution are employed: (1) a method based on redistribution from enumeration district (ED) and postcode centroids, and (2) a method based on dasymetric redistribution of ED population counts to suitable land cover zones from classified remotely sensed imagery. Refinements have been made to the centroid redistribution algorithm to accommodate an empirical measure of dispersion, and to allow redistribution in an anisotropic form. These refinements are evaluated against each other and the dasymetric method. The results suggest that all of the methods perform best in urban areas, and that while the refinements may improve the statistical performance of the models, this is at the expense of reduced spatial detail. In general, the techniques are highly sensitive to the spatial and population resolution of the input data.     

Mapping Population Distribution in the Urban Environment: The Cadastral-based Expert Dasymetric System (CEDS)

This paper discusses the importance of determining an accurate depiction of total population and specific sub-population distribution for urban areas in order to develop an improved "denominator," which would enable the calculation of more correct rates in GIS analyses involving public health, crime, and urban environmental planning. Rather than using data aggregated by arbitrary administrative boundaries such as census tracts, we use dasymetric mapping, an areal interpolation method using ancillary information to delineate areas of homogeneous values. We review previous dasymetric mapping techniques (which often use remotely sensed land-cover data) and contrast them with our technique, Cadastral-based Expert Dasymetric System (CEDS), which is particularly suitable for urban areas. The CEDS method uses specific cadastral data, land-use filters, modeling by expert system routines, and validation against various census enumeration units and other data. The CEDS dasymetric mapping technique is presented through a case study of asthma hospitalizations in the Bronx, New York City, in relation to proximity buffers constructed around major sources of air pollution. The case study shows the impact that a more accurate estimation of population distribution has on a current environmental justice and health disparities research project, and the potential of CEDS for other GIS applications.     

Instructions for Contributors to Cartography and Geographic Information Science

A number of areal interpolation methods have been developed to estimate population for overlapping, discontinuous, or fragmented areas. Previous studies examined the relative accuracy of various methods; this research advances those endeavors by comparing the effectiveness of seven different methods using a national random sample of census block groups and blocks. As the results show, the areal interpolation methods produce good population estimates for nested census blocks except in areas of heterogeneous land use or unusual contexts. In addition, estimation conducted in areas with small populations or low population density was vulnerable to high percentage error. Amongst the different methods, road network allocation and statistical regression (with area and roads as predictors) produced the best population estimates for the sample blocks.     

Building population mapping with aerial imagery and GIS data

Geospatial distribution of population at a scale of individual buildings is needed for analysis of people's interaction with their local socio-economic and physical environments. High resolution aerial images are capable of capturing urban complexities and considered as a potential source for mapping urban features at this fine scale. This paper studies population mapping for individual buildings by using aerial imagery and other geographic data. Building footprints and heights are first determined from aerial images, digital terrain and surface models. City zoning maps allow the classification of the buildings as residential and non-residential. The use of additional ancillary geographic data further filters residential utility buildings out of the residential area and identifies houses and apartments. In the final step, census block population, which is publicly available from the U.S. Census, is disaggregated and mapped to individual residential buildings. This paper proposes a modified building population mapping model that takes into account the effects of different types of residential buildings. Detailed steps are described that lead to the identification of residential buildings from imagery and other GIS data layers. Estimated building populations are evaluated per census block with reference to the known census records. This paper presents and evaluates the results of building population mapping in areas of West Lafayette, Lafayette, and Wea Township, all in the state of Indiana, USA.     

Improving Large Area Population Mapping Using Geotweet Densities

Many different methods are used to disaggregate census data and predict population densities to construct finer scale, gridded population data sets. These methods often involve a range of high resolution geospatial covariate datasets on aspects such as urban areas, infrastructure, land cover and topography; such covariates, however, are not directly indicative of the presence of people. Here we tested the potential of geo‐located tweets from the social media application, Twitter, as a covariate in the production of population maps. The density of geo‐located tweets in 1x1 km grid cells over a 2‐month period across Indonesia, a country with one of the highest Twitter usage rates in the world, was input as a covariate into a previously published random forests‐based census disaggregation method. Comparison of internal measures of accuracy and external assessments between models built with and without the geotweets showed that increases in population mapping accuracy could be obtained using the geotweet densities as a covariate layer. The work highlights the potential for such social media‐derived data in improving our understanding of population distributions and offers promise for more dynamic mapping with such data being continually produced and freely available.     

The Development of Analytical Cartography: A Personal Note

Creating dot maps to show changes in racial and Hispanic population distributions between two census periods can be an effective way to examine one of the most important dimensions of change within any metropolitan area. Using dots of one color to show population increase and dots of a second color to show population decrease vividly reveals where changes have occurred within a larger total population. We prepared such maps for the book Changing Faces, Changing Places: Mapping Southern Californians, the text of which analyzes and interprets the population shifts evident on the maps. The maps show the expansion and contraction of racial and Hispanic populations in specific neighborhoods so that community leaders and residents alike can easily relate general trends to their localities. In this article we describe the preparation of these dot maps and explain major problems encountered in linking the 1990 and 2000 census population counts at the tract level. We explain our solutions, which we believe made possible more accurate mapping of neighborhood change.     

Choosing Geographic Units for Choropleth Rate Maps,with an Emphasis on Public Health Applications

Choropleth maps are the most widely used map type for mapping rates, such as those involving disease, crime, and socioeconomic indicators. The essential step of choosing a geographic unit to map is often made in an ad hoc manner. Among the desirable characteristics of choropleth mapping units are high degree of resolution, homogeneity of population size, homogeneity of land area, observation of minimum population thresholds and land area thresholds, temporal stability and currency, compactness of shape, audience familiarity, data availability, and the functional relevance of the unit to the phenomena mapped. Because of the uneven distribution of human populations, no single geographic unit can meet all of these characteristics in practice, and a well designed choropleth map necessarily involves some compromise. We present guidelines for choosing geographic units that take into account the above criteria, considering 12 geographic units ranging from census blocks to states. Even allowing for differences in scale and purpose, some units confer clear advantages over others.     

地物空间关系匹配的高分辨率遥感影像检索

从低层视觉特征与地物空间关系特征对影像内容进行描述,建立检索模板与目标影像间的相似性直方图表达,提出一种适用于高分辨率遥感影像检索的新方法。首先,利用Quin+树将大幅面原始遥感影像分解为一系列同尺寸的序列子块;然后,分别提取各子块的低层视觉特征与地物关系特征,并以子块为基元构建候选子块的特征直方图;最后,对比检索模板与候选子块间的特征直方图相似性,实现高分辨率遥感影像的检索。使用多幅多源高分辨率遥感影像进行实验,结果表明本文方法对耕地、水系、建筑物等地类的检索精度大都维持在0.8以上,且各项检索性能指标均优于已有的两种遥感图像检索算法。     

The Creation of a National Agricultural Land Use Dataset: Combining Pycnophylactic Interpolation with Dasymetric Mapping Techniques

Agricultural Census data is summarised over spatially coarse reporting units for reasons of farm confidentiality. This is problematic for research at a local level. This article describes an approach combining dasymetric and volume preserving techniques to create a national land use dataset at 1 km² resolution. The results for an English county are compared with contemporaneous aggregated habitat data. The results show that the accurate estimates of local agricultural land use (Arable and Grass) patterns can be estimated when individual 1 km squares are combined into blocks of > 9 squares, thereby providing local estimates of agricultural land use. This in turn allows more detailed modelling of land uses related to specific livestock and cropping activities. The dataset created by this work has been subject to extensive external validation through its incorporation into a number of other national models: nitrate leaching (e.g. MAGPIE, NEAP‐N), waste, and pathogen modelling related to agricultural activity.     

Enhanced data and methods for improving open and free global population grids: putting ‘leaving no one behind’ into practice

ABSTRACT

Data on global population distribution are a strategic resource currently in high demand in an age of new Development Agendas that call for universal inclusiveness of people. However, quality, detail, and age of census data varies significantly by country and suffers from shortcomings that propagate to derived population grids and their applications. In this work, the improved capabilities of recent remote sensing-derived global settlement data to detect and mitigate major discrepancies with census data is explored. Open layers mapping built-up presence were used to revise census units deemed as ‘unpopulated’ and to harmonize population distribution along coastlines. Automated procedures to detect and mitigate these anomalies, while minimizing changes to census geometry, preserving the regional distribution of population, and the overall counts were developed, tested, and applied. The two procedures employed for the detection of deficiencies in global census data obtained high rates of true positives, after verification and validation. Results also show that the targeted anomalies were significantly mitigated and are encouraging for further uses of free and open geospatial data derived from remote sensing in complementing and improving conventional sources of fundamental population statistics.     

An Evaluation of Four Different Wavelet Decomposition Procedures for Spatial Feature Discrimination in Urban Areas

Texture or spatial arrangement of neighborhood objects and features plays an important role in the human visual system for pattern recognition and image classification. The traditional spectral–based image processing techniques have proven inadequate for urban land use and land cover mapping from images acquired by the current generation of fine–resolution satellites. This is because of the high frequency spatial arrangements or complex nature of urban features. There is a need for an effective algorithm to digitally classify urban land use and land cover categories using high–resolution image data. Recent studies using wavelet transforms for texture analysis have generally reported better accuracy. Based on a high–resolution ATLAS image, this study illustrates four different wavelet decomposition procedures – the standard, horizontal, vertical, and diagonal decompositions – for urban land use and land cover feature extraction with the use of 33×33 pixel samples. The standard decomposition approach was found to be the most efficient approach in urban texture analysis and classification. For comparison purposes and to better evaluate the accuracy of wavelet approaches in image classification, spatial autocorrelation techniques (Moran's I and Geary's C ) and the spatial co–occurrence matrix method were also examined. The results suggest that the wavelet transform approach is superior to all other approaches.     

From auxiliary data to research prospects,a review of gridded population mapping

Population has significant application value and scientific significance in resource use, public health, public transportation, disaster assessment, and environmental management. However, traditional census data can not show the population density difference within census units. Furthermore, census data are not uniform across countries, and reconciling these differences when using data from multiple countries require considerable effort. Finally, there are scale differences between census and geospatial data (e.g., land use/cover), making data analysis and needed research difficult. These challenges significantly limit the applications of census data. The advent of gridded population mapping (GPM) technology has overcome these challenges. GPM technology has developed rapidly in recent years. The research data and models are rich and diverse, and many achievements have been made. A systematic review of the current state of GPM research will help relevant researchers and data users. This article begins by summarizing the core elements of GPM research in four aspects: auxiliary data, models, accuracy, and products. It will then go on to four problems prevalent in GPM research that have direct or indirect effects on the accuracy of GPM. Finally, the article prospects GPM research from four different aspects based on the current state of research.     

Data-enriched interpolation for temporally consistent population compositions

This research evaluates the performance of areal interpolation coupled with dasymetric refinement to estimate different demographic attributes, namely population sub-groups based on race, age structure and urban residence, within consistent census tract boundaries from 1990 to 2010 in Massachusetts. The creation of such consistent estimates facilitates the study of the nuanced micro-scale evolution of different aspects of population, which is impossible using temporally incompatible small-area census geographies from different points in time. Various unexplored ancillary variables, including the Global Human Settlement Layer (GHSL), the National Land-Cover Database (NLCD), parcels, building footprints and the proprietary ZTRAX® dataset are utilized for dasymetric refinement prior to areal interpolation to examine their effectiveness in improving the accuracy of multi-temporal population estimates. Different areal interpolation methods including Areal Weighting (AW), Target Density Weighting (TDW), Expectation Maximization (EM) and its data-extended approach are coupled with different dasymetric refinement scenarios based on these ancillary variables. The resulting consistent small area estimates of white and black subpopulations, people of age 18–65 and urban population show that dasymetrically refined areal interpolation is particularly effective when the analysis spans a longer time period (1990–2010 instead of 2000–2010) and the enumerated population is sufficiently large (e.g., counts of white vs. black). The results also demonstrate that current census-defined urban areas overestimate the spatial distribution of urban population and dasymetrically refined areal interpolation improves estimates of urban population. Refined TDW using building footprints or the ZTRAX® dataset outperforms all other methods. The implementation of areal interpolation enriched by dasymetric refinement represents a promising strategy to create more reliable multi-temporal and consistent estimates of different population subgroups and thus demographic compositions. This methodological foundation has the potential to advance micro-scale modeling of various subpopulations, particularly urban population to inform studies of urbanization and population change over time as well as future population projections.     

LiDAR测量点云融合影像的分块滤波方法

针对现有LiDAR地面点滤波算法对复杂地形地物适应性不强的问题,本文提出了一种融合点云与地面影像分块滤波的方法。首先,将地面影像与点云匹配,使点云从影像中获取更多的光谱纹理信息。然后,分析地物光谱、林地相对密度、点云高程特征、地面DSM模型及其坡度,并基于决策级融合将原始点云切割成若干独立的区块。最后,根据每块区域不同的多元细节特征,对IPTD滤波算法进行改进并利用搜索法优化参数,得到最优且稳健的结果。利用滤波后的总地面点通过插值算法得到的DEM模型和相关试验验证了本文算法的优越性。     

一种基于梯度和与一致性组合策略的无缝纹理映射方法研究

针对三维纹理映射中存在接缝、颜色差异大等问题,采用基于梯度值之和的选片算法,结合一致性检查、全局颜色校正和局部颜色校正等策略,消除影像的模糊、重影与色差,实现无缝纹理映射,同时避免影像失焦和障碍物的影响,试验结果表明,该方法纹理映射效果较好。     

海南岛土地利用的遥感调查与机助制图

海南岛土地利用调查制图在微机空间信息系统支持下,利用经几何校正的TM卫星遥感磁带数据直接转换成数字化地图。本文介绍了这次调查制图的方法,论述了海南岛土地利用现状分类以及各类土地利用的TM影像特征和有关解译标志,进行了面积统计和精度检验,并研究了各土地利用类型的特征。