Seismic moment release along selected major transforms on the Central Indian Ridge,Western Indian Ocean,and its tectonic implications

A detailed seismicity map of the Central Indian Ridge for the period 1912–1993 is presented, and the earthquakes pertaining to four major transforms offsetting the ridge are utilized to study the moment release pattern. The scalar moment release for the period 1912–1993, and the summed moment rate tensors for both short period (1977–1993) and long period (1912–1993) bring out a unified picture of moment release pattern. The fraction of seismic slip calculated based on depths of 100°C and 400°C limiting temperatures suggests that the Marie-Celeste transform requires a slip almost to a depth of 400°C isotherm to account for the observed moment, and the Argo transform requires depth of faulting much above the 400°C isotherm. A very small fraction of slip is accounted seismically for Vema (53%) and 12° 12′S (23%) even to depths of 100°C isotherm, suggesting a very low order of moment release along these transforms. The horizontal plate velocities and the corresponding strain rates obtained from moment tensor summation of long period data (82 years) give rise to (V _y ^y ; V _y ^x mm. yr⁻¹) of 6.0 and 6.1 along Marie-Celeste, 1.3 and 0.50 along Argo, 0.06 and 0.06 along 12° 12′S, 1.6 and 0.25 along Vema transforms. The corresponding strain rates (ε _y ^y ;ε _y ^x × 10⁻¹⁵ S⁻¹) are 12.7 and 6.8 along MarieCeleste, 6.9 and 1.4 along Argo, 0.27 and 0.14 along 12° 12′S, 7.3 and 0.58 along Vema transforms. These results suggest that the strain rates were highest and almost all predicted motion is taken up seismically along the Marie-Celeste transform. The strain rates are lower along Argo transform and the observed moment release require shallower depth of faulting in order to slip to be accounted seismically. The Vema and 12° 12′S transforms are characterized by low strain rates and less than 15 per cent of motion is accommodated seismically within the seismogenic layer. It is proposed that the deficiency of moment release along the Vema and 12° 12′S multiple transform system may be due to most of the plate motion occurring aseismically.     

中印度洋脊Edmond热液区黄铁矿的标型特征及其对海底成矿作用环境的指示

对中印度洋脊Edmond热液区的丘顶和丘坡进行电视抓斗取样,获得了大量的金属硫化物等热液作用产物样品。在进行细致的矿相学分析基础上,对硫化物中黄铁矿的标型特征及其演化进行了详细研究。结果表明,Edmond热液区的黄铁矿可分3种类型,其形态标型和成分标型分别具有以下特征:Ⅰ型:呈自形立方体状,S/Fe原子数比接近于2.00,微量元素具有高Cu,低Zn、As、Pb、Ni和Ag的特点,Cu/Zn值高,平均可达4.26;Ⅱ型:呈半自形立方体状,S/Fe原子数比平均2.03,具有高Zn、Co、低Cu的特点,Cu/Zn值(平均0.04)低;Ⅲ型:主要呈胶状、莓球状,S/Fe原子数比平均2.04,具有Ag、Pb、Zn、As元素富集的特点,Cu/Zn值介于前两者之间(平均1.09)。根据硫化物中矿物共生组合关系,认为这3类黄铁矿分别对应高温、中高温和低温成矿作用,黄铁矿的形态和成分能很好地指示热液区的成矿环境和成矿条件的演变。     

中印度洋海岭Edmond热液区块状硫化物中自然金的发现及其意义

位于中印度洋中速扩张洋脊的Edmond热液区块状硫化物矿石样品主要分为以黄铁矿-黄铜矿为主的富Fe块状硫化物、热水沉积成因的富含硅质块状矿石和以硬石膏为主的硫酸盐矿石等3种不同类型.通过扫描电镜观察和X射线光电子能谱分析,在硫酸盐矿石和富Fe块状硫化物中首次发现了自然金,最大粒径可达20 μm左右,主要呈不规则粒状或板状与硬石膏、闪锌矿等硫化物颗粒紧密共生,少量以次显微金形式沉淀在自形黄铁矿晶体表面.电子探针分析结果显示,晚期形成于中低温条件下的贫Fe闪锌矿中Au富集程度普遍较高(平均含量约为6700×10-6);Ag主要以类质同象形式赋存于与闪锌矿、黄铜矿伴生的硫盐矿物中(5.0％～6.7％ Ag),这表明贵金属元素的富集成矿作用与海底热液活动晚期的中低温成矿阶段有关.推断Au在该研究区以高温、酸性和氯度较高为特征的热液流体中主要呈AuCl2-或AuHS0形式迁移.而海水与热液流体混合、喷口流体发生相分离以及传导冷却作用,被认为是导致Au有效沉淀的重要控制因素.     

Biological productivity, terrigenous influence and noncrustal elements supply to the Central Indian Ocean Basin: Paleoceanography during the past ∼ 1 Ma

A 2m-long sediment core from the siliceous ooze domain in the Central Indian Ocean Basin (CIOB; 13‡03′S: 74‡44′E; water depth 5099m) is studied for calcium carbonate, total organic carbon, total nitrogen, biogenic opal, major and few trace elements (Al, Ti, Fe, K, Mg, Zr, Sc,V, Mn, Cu, Ni, Zn, Co, and Ba) to understand the productivity and intensity of terrigenous supply. The age model of the sediment core is based on U-Th dating, occurrence of Youngest Toba Tuff of ∼ 74 ka and Australasian microtektites of ∼ 770 ka. Low carbonate content (< 1%) of sediment core indicates deposition below the carbonate compensation depth. Organic carbon content is also very low, almost uniform (mean 0.2 wt%) and is of marine origin. This suggests a well-oxygenated bottom water environment during the past ∼ 1100ka. Our data suggest that during ∼ 1100 ka and ∼ 400 ka siliceous productivity was lower, complimented by higher supply of terrigenous material mostly derived from the metasedimentary rocks of High Himalayan crystalline. However, during the last ∼ 400 ka, siliceous productivity increased with substantial reduction in the terrigenous sediment supply. The results suggest that intensity of Himalayan weathering, erosion associated with monsoons was comparatively higher prior to 400 ka. Manganese, Ba, Cu, Ni, Zn, and Co have around 90% of their supply from noncrustal (excess) source and their burial to seafloor remained unaffected throughout the past ∼ 1100 ka.     

印度次大陆中央构造带沉积—变质型锰矿的矿物学和地球化学

对印度中央构造带sauaar带锰矿及其围岩的31个样品进行了显微镜仔细的观察和鉴定,并分析了其主量元素、微量元素和稀土元素的地球化学特征,发现该带的锰矿主要是软锰矿和硬锰矿,锰矿主要富集在锰榴石英岩内.含锰岩系样品具非常高的Mn/Fe比值,说明热液运输和成矿作用期间锰和铁的强烈分异;MnO/TiO2为67.98-1417.52,说明有大量陆源物质经风化、搬运加入并混合沉积而成.用太古界平均澳大利亚页岩（PAAS）标准化后,稀土元素含量中δEu,δCe都有明显的正异常,说明该带锰矿床是在较强氧化海洋环境和有大量陆源物质加入的条件下沉积,并经过热液的变质交代作用而成的沉积一变质型锰矿床.该沉积—变质型锰矿的发现和研究对我国南方扬子克拉通中元古代浅变质岩系的锰矿寻找具有一定的借鉴意义.     

Magnetotelluric Constraints on the Occurrence of Lower Crustal Earthquakes in the Intra-plate Setting of Central Indian Tectonic Zone

Lower crustal earthquake occurrence in the Central Indian Tectonic Zone(CITZ) of the Indian sub-continent was investigated using magnetotelluric(MT) data. MT models across the CITZ, including the new resistivity model across the 1938 Satpura lower crustal earthquake epicenter, show low resistive(80 ?m) mid-lower crust and infer small volume(1 vol%) of aqueous fluids existing in most part of lower crust. This in conjunction with xenoliths and other geophysical data supports a predominant brittle/semi-brittle lower crustal rheology. However, the local deep crustal zones with higher fluid content of 2.2%–6.5% which have been mapped imply high pore pressure conditions. The observation above and the significant strain rate in the region provide favorable conditions(strong/moderate rock strength, moderate temperature, high pore pressure and high strain rate) for brittle failure in the lower crust. It can be inferred that the fluid-rich pockets in the mid-lower crust might have catalyzed earthquake generation by acting as the source of local stress(fluid pressure), which together with the regional stress produced critical seismogenic stress conditions. Alternatively, fluids reduce the shear strength of the rocks to favor tectonic stress concentration that can be transferred to seismogenic faults to trigger earthquakes.     

Mesoproterozoic Reworking of Palaeoproterozoic Ultrahigh-temperature Granulites in the Central Indian Tectonic Zone and its Implications

In the southern periphery of the Sausar Mobile Belt (SMB), thesouthern component of the Central Indian Tectonic Zone (CITZ),a suite of felsic and aluminous granulites, intruded by gabbro,noritic gabbro, norite and orthopyroxenite, records the polymetamorphicevolution of the CITZ. Using sequences of prograde, peak andretrograde reaction textures, mineral chemistry, geothermobarometricresults and petrogenetic grid considerations from the felsicand the aluminous granulites and applying metamorphosed maficdyke markers and geochronological constraints, two temporallyunrelated granulite-facies tectonothermal events of Pre-Grenvillianage have been established. The first event caused ultrahigh-temperature(UHT) metamorphism (M₁) (T 950°C) at relatively deepercrustal levels (P 9 kbar) and a subsequent post-peak near-isobariccooling P–T history (M₂). M₁ caused pervasive biotite-dehydrationmelting, producing garnet–orthopyroxene and garnet–rutileand sapphirine–spinel-bearing incongruent solid assemblagesin felsic and aluminous granulites, respectively. During M₂,garnet–corundum and later spinel–sillimanite–biotiteassemblages were produced by reacting sapphirine–spinel–sillimaniteand rehydration of garnet–corundum assemblages, respectively.Applying electron microprobe (EMP) dating techniques to monazitesincluded in M₁ garnet or occurring in low-strain domains inthe felsic granulites, the UHT metamorphism is dated at 2040–2090Ma. Based on the deep crustal heating–cooling P–Ttrajectory, the authors infer an overall counterclockwise P–Tpath for this UHT event. During the second granulite event,the Palaeoproterozoic granulites experienced crustal attenuationto 6·4 kbar at T 675°C during M₃ and subsequentnear-isothermal loading to 8 kbar during M₄. In the felsic granulites,the former is marked by decomposition of M₁ garnet to orthopyroxene–plagioclasesymplectites. During M₄, there was renewed growth of garnet–quartzsymplectites in the felsic granulites, replacing the M₃ mineralassemblage and also the appearance of coronal garnet–quartz–clinopyroxeneassemblages in metamorphosed mafic dykes. Using monazites frommetamorphic overgrowths and metamorphic recrystallization domainsfrom the felsic granulite, the M₄ metamorphism is dated at 1525–1450Ma. Using geochronological and metamorphic constraints, theauthors interpret the M₃–M₄ stages to be part of the sameMesoproterozoic tectonothermal event. The result provides thefirst documentation of UHT metamorphism and Palaeo- and Mesoproterozoicmetamorphic processes in the CITZ. On a broader scale, the findingsare also consistent with the current prediction that isobaricallycooled granulites require a separate orogeny for their exhumation. KEY WORDS: Central Indian Tectonic Zone; UHT metamorphism; counterclockwise P–T path; monazite chemical dating     

Mineralization and deformation of the Malanjkhand terrane (2,490–2,440 Ma) along the southern margin of the Central Indian Tectonic Zone

The Malanjkhand Cu–Mo–Au deposit, located near the northwest margin of the Malanjkhand batholith (terrane), is a strategic and significant porphyry-style deposit that experienced a protracted 50 m.y. deformational history shortly after its formation at 2,490±8 Ma (Stein et al. 2004). In a recent study, Panigrahi et al. (2004) averaged U–Pb SHRIMP zircon data from a pooled set of samples from the Malanjkhand batholith to advocate a meaningless intermediate age of ~2,476 Ma for the Malanjkhand granitoid and its Cu–Mo–Au deposit. In the northwest part of the Malanjkhand batholith, Re–Os dating of occurrence-specific molybdenite captures not only the age of porphyry-style mineralization and associated magmatism, but also elucidates a complex deformational history that extends to ~2,450 Ma. In the central part of the Malanjkhand batholith, Re–Os dating of delicate spindles of accessory molybdenite occurring with pristine muscovite in miarolitic cavities within the undeformed microgranitoid at the Devgaon Mo prospect unequivocally shows that deformation ceased at this location no later than 2,470–2,465 Ma. The deformational history recorded at the Malanjkhand deposit in the northwest most likely reflects prolonged transpressive convergence and docking of the Malanjkhand terrane with units in the poorly understood (proto) Central Indian Tectonic Zone (CITZ) along its southern margin, the Central Indian shear zone. The timing for this convergence is Late Archean–Early Paleoproterozoic.Comment on “Age of granitic activity associated with copper–molybdenum mineralization at Malanjkhand, Central India” by Panigrahi MK et al. (Mineralium Deposita 39:670–677)     

Zircon U‐Pb/Lu‐Hf and monazite chemical dating of the Tirodi biotite gneiss: implication for latest Palaeoproterozoic to Early Mesoproterozoic orogenesis in the Central Indian Tectonic Zone

In this investigation, we reconstruct the latest Palaeoproterozoic to Early Mesoproterozoic orogenic events along the southern margin of the Central Indian Tectonic Zone (CITZ), using sensitive high resolution ion microprobe (SHRIMP) U‐Pb zircon dating and Lu‐Hf isotope analyses of zircon and Th‐U‐Pb chemical dating of monazite from samples of the Tirodi biotite gneiss (TBG) unit in the Sausar Mobile Belt (SMB), the latter constituting the southernmost litho‐tectonic component of the CITZ. U‐Pb zircon dating of one migmatitic gneiss sample from the type locality of the Tirodi biotite gneiss in the northern domain of the SMB has yielded an age of 1618 ± 8 Ma, which is considered to be the time of magmatic crystallization of its protolith. Combined U‐Pb zircon and monazite chemical dating of two granite gneiss samples from the southern domain of the SMB broadly constrain magmatic crystallization between 1603 ± 23 Ma and 1584 ± 17 Ma and an overprinting metamorphic recrystallization event at 1572 ± 7 Ma. Monazites from the granite gneiss samples also record a terminal metamorphic event at 1415 ± 23 Ma. Lu‐Hf isotopic analyses of zircons reveal fundamentally different source rock reservoirs for the protoliths of these magmatic rocks across the SMB. While the type TBG from the northern domain was derived from an Early Palaeoproterozoic source T(Hf) from 2093 to 2523 Ma, with a mean value at 2379 Ma) of essentially juvenile material with minor crustal components (εHf(t) from −3.3 to + 3.7), the granite from the southern domain had a mature crustal source (εHf(t) from −12.5 to −21.9) of Palaeoarchaean age T(Hf) from 3051 to 3630 Ma, with a mean value at 3218 Ma). When integrated with metamorphic information previously obtained from the 1.6 Ga ultra‐high temperature granulite facies metamorphic event in the SMB, the discrete magmatic and metamorphic events between 1.62/1.60 Ga and 1.42 Ga can be correlated with the formation of an Early Mesoproterozoic accretionary orogen in the CITZ. Copyright © 2011 John Wiley & Sons, Ltd.